Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

GPCDOC Local TDS India Shell Helix HX7 10W-40 (SN CF A3 B4) (en-IN) TDS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Technical Data Sheet

Shell Helix HX7 10W-40


Synthetic technology motor oil - Helps to keep engines clean and running efficiently

Shell Helix HX7 helps to keep engines clean and running efficiently by helping to prevent the formation of sludge
and engine deposits. It is suitable for a wide variety of modern vehicles driven in demanding traffic conditions.

Performance, Features & Benefits Main Applications

· Synthetic Technology
Uses both synthetic and mineral base stocks to achieve
· Shell Helix HX7 helps to prolong the engine life of modern
vehicles in demanding daily traffic conditions by protecting
higher performance levels than can be formulated from against wear. Shell Helix HX7 can be used for gasoline
mineral oils alone. engines, diesel engines (without particulate filters) and gas

· Shell’s unique active cleansing technology


Actively locks away harmful performance-robbing deposits.
engines, and it is also suitable for use with biodiesel and
gasoline/ethanol blends.

· Active clean-up Specifications, Approvals & Recommendations


Helps to remove sludge left behind by inferior oils 1.

· API SN/CF

· Excellent wear protection 2


· ACEA A3/B3, A3/B4
Helps to extend engine life by protecting against wear,
· JASO SG+

·
even in daily traffic conditions.

· Excellent resistance to degradation


Helps to maintain protection throughout the oil-drain ·
MB-Approval 229.3

VW 502.00/505.00

interval. · Renault RN 0700, 0710

· Low-temperature performance · Fiat 9.55535-G2 (meets requirements)

Faster oil flow for quicker engine warm-up 3.


· To find the right Shell Helix product for your vehicles and

· Low-evaporation formulation 4 equipment, please consult Shell LubeMatch at:


http://lubematch.shell.com
Low oil consumption for less frequent top-up.

· Multi-fuel capability · Advice on applications not covered here may be obtained


from your Shell or Shell Lubricants distributor
Can be used for gasoline, diesel and gas engines, and is
representatives or technical help desks.
also suitable for biodiesel and gasoline/ethanol blends.
1 Based on a severe sludge clean-up test.

2 Based on Sequence IVA engine test carried out at an independent laboratory.

3 Compared with Shell Helix mineral oils.

4 Based on NOACK volatility test and equipment manufacturers’ requirements.

Page 1 of 2 Shell Helix HX7 10W-40 (SN/CF, A3/B4), v 7.2 12.06.2015.09.19


Typical Physical Characteristics

Properties Method Shell Helix HX7 10W-40


Kinematic Viscosity @100 C 0
cSt ASTM D445 14.37

Kinematic Viscosity 0
@40 C cSt ASTM D445 96.31

Viscosity Index ASTM D2270 154

MRV @-300C cP ASTM D4684 21100

Density @150C kg/m3 ASTM D4052 860

Flash Point 0
C ASTM D92 246

Pour Point 0
C ASTM D97 -45

These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.

Health, Safety & Environment

· Health and Safety

Shell Helix HX7 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.

Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.

Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/

· Protect the Environment


Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Page 2 of 2 Shell Helix HX7 10W-40 (SN/CF, A3/B4), v 7.2 12.06.2015.09.19

You might also like