Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Raw Material Modification

Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 4

Annexture I

Scope of work
Sl. No. Description Unit

Demolishing and disposal of the the existing brick masonry/wooden partition/glass


partition/existing wall upto 3.0m height of selected area sorting out the materials
such as glass etc., as directed including stacking serviceable materials properly
1 CuM.
with all leads and lifts and carting away unserviceable material outside the plot and
disposing the same at locations identified by the client/consultant after getting all
necessary statutory approval for the same.

Demolishing and disposal of the the RCC work wall upto -1.0m-3.0m height of
selected area sorting out the materials such as glass etc., as directed including
stacking serviceable materials properly with all leads and lifts and carting away
2 CuM.
unserviceable material outside the plot and disposing the same at locations
identified by the client/consultant after getting all necessary statutory approval for
the same.

Providing & filling in required area, confined area properly Graded clean sand
brought from outside laid in layers not exceeding 150 mm including watering,
compacting the sand with vibratory plate compactor, reversible plate compactor,
rammer, etc., depending on site requirement. After compaction of sand layers
3 CuM.
testing each of the compacted layer by the sand replacement method to ensure that
the specified density of 85% relative density as specified by 2720 part 14 All work
done as per drawing, specification and direction of owner/ consultant.
(Quoted rates shall be inclusive of Royalty)

Providing, mixing and placing in position R.C.C. design mix conforming to Grade
M25 of IS 456 : 2000 , Cement used shall be Ordinary Portland Cement Grade 53
conforming to IS:12269 (Cement 53 Grade - Ultratech, ACC, Ambuja, Lafarge,
Dalmia) with 20mm and down graded coarse aggregates in foundation (floor,
4 plinth beams etc.), foundations, walls (vertical/circular in Plan) and other cast-in- CuM.
situ works including vibrating, curing, addition of plasticizers with the dosing of
floor hardener (5Kg/Sqm) on the concrete surface completeion by trowel with
smooth finish, complete as per drawings, specifications and as directed by
Owner/Consultant.

Providing and fixing clean, straight Plywood Shuttering, Curverd Plywood


Shuttering/ Steel Plate Shuttering for PCC/RCC work, i.e. foundations
(footings, raft, plinth beams etc.), equipment foundations, tank foundations, pits,
sumps, plinth beams, columns wherever necessary, including strutting,
5 scaffolding, bracing, forming chamfers, drip moulds, pockets, wedges, nails, SqM.
bracing, brackets with temporary working platforms & access systems, application
to sides of formwork with mould releasing agents of approved make etc., keeping
the same in position during concreting and removing afterwards as per
specifications & as directed by Owner/Consultant.
Supplying, cleaning, straightening ,cutting, bending fabricating including wastage,
hooking, cold bending, placing and binding in position as per drawings. Thermo-
mechanically Treated (TMT) bars of Fe 500D (IS 1786- 2008) of SAIL, TISCO,
RINL, JSW make,of different diameters, of required sizes including handling and
transport complete for all RCC works such as columns, beams, lintels, tanks, ducts,
6 MT
trenches, sumps, slabs, facias, etc. with GI binding wire of 18 SWG , as per
construction drawings, including welding wherever it is required for lapping the
steel , including providing PVC/ readymade cover blocks cover ,chairs of
appropriate size for placing the reinforcements in position and for maintaining the
cover specified and/or according to relevant IS.

Providing and constructing first class brick masonry in C.M. (1:4) in sub-
structure, including scaffolding, curing etc., for all depth complete as per
7 specifications, drawings & as directed by owner/ consultant. The rate includes CuM.
providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course
of masonry work. Bricks to be used of minimum crushing strength 35 Kg/cm2.

i) 230mm thick
Providing and laying Jhonson endura make industrial heavy duty tiles of
30cmx30cmx2cm approved quality and make including cement mortar 1:3
8 bedding. Rate shall include for preparation surface, wastages, smooth joint, SqM.
cleaning and acid wash etc. complete with white cement, curing etc., complete as
per the specifications.

Providing and laying 12mm thick sand faced cement plaster; in one layer on
R.C.C. or masonry to all heights The first coat shall be 12mm in mortar of 1
cement : 4 sand by volume with Water proofing compound (Cementmix Plus -
Berger make) shall be added appropriately. Quoted rate shall be inclusive of
Providing and fixing in position approved galvanized chicken wire mesh
9 SqM.
12mmx12mmx24 gauge at junction of masonry and concrete surfaces as directed
for use in interior and exterior plastering including cutting, wastage and overlaps,
providing H framed scaffolding, raking out of joints, mouldings including curing
etc., complete as per the specifications, drawings & as directed by
owner/consultant.

Providing two coats of paint on interior surfaces at all heights of wall and concrete
surfaces including cleaning, preparing the surface, applying primer - scraping by
10 sand paper - applying two coats of top coat using brush, scaffolding etc. SqM.
Note: All the Paint material shall be of Paint Brand - Berger Paints manufacture
only and shall be procured by contractor.

Total
Less : Discount 22.438%
Net Total Discount cost
Qty Rate Amount

50.00 1200 60,000.00

50.00 2200 110,000.00

60.00 1000 60,000.00

14.00 5500 77,000.00

10.00 250 2,500.00


1.50 54000 81,000.00

5.00 5000 25,000.00

100.00 1100 110,000.00

40.00 300 12,000.00

40.00 100 4,000.00

₹ 541,500.00
₹ 121,500.00
₹ 420,000.00

You might also like