Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Estimate RoadsnPathways

Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 3

ESTIMATE FOR PATHWAYS & ROADWAYS

PROJECT
S No Code Description Unit Qty Rate Amount
1 2.1 Earth work in surface excavation not exceeding 30cm
in depth but exceeding 1.5 m in width as well as 10
sqm on plan including disposal of excavated earth
upto 50 m and lift upto 1.5 m, disposed soil to be
levelled and neatly dressed :

2 2.1.1 All kinds of soil 100 sqm 40 3786.95 151478


3 2.3 Banking excavated earth in layers not exceeding
20cm in depth, breaking clods, watering, rolling each
layer with 1/2 tonne roller, or wooden or steel
rammers, and rolling every 3rd and topmost layer with
power roller of minimum 8 tonnes and dressing up, in
embankments for roads, flood banks, marginal banks,
and guide banks, etc lead upto 50m and lift upto 1.5m

4 2.3.1 All kinds of soil cum 40 181.25 7250


5 16.1 Preparation and consolidation of sub grade with sq m 3000 61.25 183750
power road roller of 8 to 12 tonne capacity after
excavating earth to an average of 22.5 cm depth,
dressing to camber and consolidating with road roller
including making good the undulations etc. and re-
rolling the sub grade and disposal of surplus earth
with lead upto 50 metres.

6 2.27 Supplying and filling in plinth with Jamuna sand under


floors, including watering, ramming, consolidating and
dressing complete. sq m 900 749.3 674370

7 4.1 Providing and laying in position cement concrete of


specified grade excluding the cost of centering and
shuttering - All work up to plinth level

8 4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone


aggregate 40 mm nominal size) cum 1050 3593.3 3772965

9 16.68 Providing and laying 60mm thick factory made


cement concrete interlocking paver block of M -30
grade made by block making machine with strong
vibratory compaction, of approved size, design &
shape, laid in required colour and pattern over and
including 50mm thick compacted bed of coarse sand,
filling the joints with fine sand etc. all complete as per
the direction of Engineer-in-charge
sq m 6320 536.65 3391628

10 16.73 Dry stone pitching 22.5 cm thick laid in courses and


required profile with hammer dressed stones having
no side less than 15 cm, with minimum depth of 20
cm including preparing the bedding surface etc. all
complete.(Payment for Stone to be made separately).
sq m 3000 181.05 543150
11 16.72 Supplying and stacking of hard stone (for stone
pitching) 22.5 cm thick at site. cum 600 607.5 364500

12 11.39 Providing and laying rectified Glazed Ceramic floor


tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer), of 1st quality
conforming to IS : 15622, of approved make, in
colours White, Ivory, Grey, Fume Red Brown, laid on
20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse
sand), including grouting the joints with white cement
and matching pigments etc., complete.

sq m 1620 931.5 1509030

13 16.69 Providing and laying at or near ground level factory


made kerb stone of M-25 grade cement concrete in
position to the required line, level and curvature,
jointed with cement mortar 1:3 (1 cement: 3 coarse
sand), including making joints with or without grooves
(thickness of joints except at sharp curve shall not to
more than 5mm), including making drainage opening
wherever required complete etc. as per direction of
Engineer-in-charge (length of finished kerb edging
shall be measured for payment). (Precast C.C. kerb
stone shall be approved by Engineer-in-charge).

cu m 80 5046.8 403744

14 16.70 Providing and fixing G.I. chain link fabric fencing of


required width in mesh size 50x50 mm including
strengthening with 2 mm dia wire or nuts, bolts and
washers as required complete as per the direction of
Engineer-in-charge. sq m

15 16.70.2 Made of G.I. wire of dia. 4 mm, PVC coated to


achieve outer dia not less than 5 mm in required
colour and shade sq m 5230 519.15 2715155

16 10.10 Fixing standard steel glazed doors, windows and


ventilators in walls , including fixing of float glass
panes with glazing clips and special metal- sash putty
of approved make, or metal beading with screws,
(only steel windows, glass panes cut to size and
glazing clips or metal beading with screws, shall be
supplied by department free of cost.
sq m 5230 59.9 313277

17 13.84 Painting with synthetic enamel paint, having VOC


(Volatile Organic Compound) content less than 150
grams/ litre, of approved brand and manufacture,
including applying additional coats wherever required
to achieve even shade and colour.
sq m

18 13.84.2 Two coats sq m 650 53.9 35035

19 13.85 Applying priming coats with primer of approved brand


and manufacture, having low VOC (Volatile Organic
Compound) content.
20 13.85.2 With ready mixed red oxide zinc chromatic on steel/
iron works having VOC content less than 250grams /
litre sq m 650 24.3 15795

21 4.2 Providing and laying cement concrete in retaining


walls, return walls, walls (any thickness) including
attached pilasters, columns, piers, abutments, pillars,
posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks, plain
window sills, fillets, sunken floor,etc., up to floor five
level, excluding the cost of centering, shuttering and
finishing :

22 4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone


aggregate 20 mm nominal size) sq m 800 5272.4 4217920

23 19.6 Providing and laying non-pressure NP2 class (light


duty) RCC. pipes with collars jointed with stiff mixture
of cement mortar in the proportion of 1:2 (1 cement: 2
fine sand) including testing of joints etc. complete:

24 19.6.10 900 mm dia. R.C.C. pipe sq m 80 1678.85 134308


25 16.81 Providing and erecting 2.00 metre high temporary
barricading at site as per drawing/ direction of
Engineer-in-Charge which includes writing and
painting, arrangement for traffic diversion such as
traffic signals during construction at site for day and
night, glow lamps, reflective signs, marking, flags,
caution tape as directed by the Engineer-in- Charge.
The barricading provided shall be retained in position
at site continuously i/c shifting of barricading from one
location to another location as many times as
required during the execution of the entire work till its
completion. Rate include its maintenance for
damages, painting, all incidentals, labour materials,
equipments and works required to execute the job.
The barricading shall not be removed without prior
approval of Engineer-in-Charge. (Note :- One time
payment shall be made for providing barricading from
start of work till completion of work i/c shifting. The
barricading provided shall remain to be the property
of the contractor on completion of the

PER M 600 1078.65 647190

TOTAL 19080545

You might also like