Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    Lorantz AC256P-B1-8

    Uploaded by

    TN

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lorantz AC256P-B1-8

    Uploaded by

    TN
    16 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views2 pages

    Lorantz AC256P-B1-8

    Uploaded by

    TN

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MODEL: AC256P-B1-8 10" BASS-MID 300W

    Description
    The AC256P/B1 is an Australian made economical
    ferrite bass-mid 10” loudspeaker with a useful upper
    limit of 5.4kHz. This model offers excellent bass
    performance, high efficiency, and wide frequency range
    with a clear pleasant reproduction quality suitable for
    wide range of applications.
    The latest technology applicable to high power
    loudspeakers construction has been incorporated
    without compromise.
    The cone is made in house from local and imported
    paper and air dried for maximum stiffness. High
    efficiency wide frequency range and good cone rigidity
    is achieved with a deep curvilinear paper cone. The
    speaker resonance was chosen to offer high power
    handling, high sensitivity and reliable performance in
    bass applications. The cone body is terminated with an
    “m” type cloth surround and finished with a paper
    dust-cap to enhance bass performance and control mid
    and high frequency response.
    Reliable performance and 200Wrms AES rating is
    achieved with a 45mm voice coil and state of art high
    temperature adhesives.
    The AC256P model is engineered and hand crafted to
    the highest and strictest tolerances to meet the
    demanding requirements of professional sound
    reinforcement systems.

    Application
    High-quality bass sound reinforcement applications in
    the frequency range 40Hz to 7 KHz for applications
    where economy light weight and big performance in a
    small enclosure is an important consideration i.e.
    combo applications, electric bass, live music clubs,
    music playback systems, fold-back and other general
    applications. In the correct enclosure and under
    controlled conditions we recommend each AC256P/B1
    be driven by a power amplifier capable of delivering 50 Mounting Details
    to 300 watts into 8 ohms providing the incoming signal Baffle opening diameter
    is processed to avoid over excursion at low frequencies. Front mounting 220 mm
    Rear mounting 220 mm
    Mounting pattern:
    Options Four 5.6 x 11.3 mm slots equi-spaced on 238 mm
    PCD.
    Model Impedance Flange thickness 8 mm
    AC256P-B1-4 4 ohm
    AC256P-B1-8 8 ohm
    AC256P-B1-16 16 ohm

    This datasheet applies to our AC256P-B1-8 model.

    Lorantz Audio Services Pty Ltd, 47 Dandenong St., Dandenong, Vic., Australia, 3175
    www.lorantz.com.au Email; info@lorantz.com.au Tel.+61397915971 Page 1 Page 1
    MODEL: AC256P-B1-8 10" BASS-MID 300W

    Technical Data
    Typical measured Thiele/Small parameters:

    Maximum Program power = 300 w Frequency Response


    AES power = 150 watt
    Rated nominal impedance Z = 8 ohms
    Rated frequency range = 40 - 5400 Hz
    Reference sensitivity = 94.8 dBSPL
    Resonance frequency = 60 Hz
    Mechanical Q Qm = 2.0
    Electrical Q Qe = 0.44
    Total spk. Q Qts = 0.36
    Diaphragm mass Mmd = 20.0 gms
    Infinite baffle sound pressure response recorded at 2.83V
    Effective diaphragm diameter D = 20 cm
    at one meter.
    Effective diaphragm area Sd = .0314 sq.m.
    (a) Blue curve is on axis spl response
    Vol. equiv to spk compliance Vas = 44.9 litres
    (b) Orange curve is SPL at 30 degrees off axis.
    Mechanical compliance Cms = 0.324mm/N
    (c) Green curve is SPL at 40 degrees off axis.
    BL product Bl = 10.9 T.M.
    Voicecoil diameter d = 45 mm
    Voicecoil material = copper
    Voicecoil DC resistance Re = 6.3 ohms
    Voicecoil inductance Lvc = 0.87 mH
    Voicecoil height = 11.5 mm Impedance plot
    Height of air-gap Hg = 8 mm .
    Peak linear displacement Xpk = 3.7 mm
    X Damage peak to peak Xpk-pk = 19.6 mm
    Reference efficiency = 1.9 %
    Speaker total mass = 2320 gms

    Specifications subject to change without notice.

    Free-air impedance magnitude plot.


    Notes
    (1) AES power is determined according to AES2-1984
    standard in free-air 55Hz-550Hz.
    (2) Maximum recommended program power is twice AES
    power providing the safe excursion limits are not exceeded.
    (3) Reference sensitivity is SPL at 1W at 1m derived from
    Thiele/Small parameters.
    (4) Frequency range is the useful frequency range for this
    transducer when mounted in its recommended enclosure.
    (5) Thiele/Small parameters are derived after a
    preconditioning test and are a better representation of the
    long term parameters in use.
    (6) Peak linear displacement Xpk derived from Klippel XBL

    29-11-2017A
    Copyright © Lorantz Audio Services Pty Ltd

    Lorantz Audio Services Pty Ltd, 47 Dandenong St., Dandenong, Vic., Australia, 3175
    www.lorantz.com.au Email; info@lorantz.com.au Tel.+61397915971 Page 2 Page 2

    You might also like