Product Catalog: Fluid Transfer Systems

Table Of Contents
Product Page
Fuel Nozzles 1 1/2”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 & 2
Fuel Nozzles 2” FN800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Fuel Nozzles 2” FX1500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Cross Section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tank Filling Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
External Line Non-Pressure Fueling System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Internal Line Non-Pressure Fueling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Non-Pressure System Tank Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Non Pressure System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Fuel Receivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3/4” Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
High Flow 1” Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
High Flow Nozzle - Receiver Flow Rates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Coolant and Engine Connectors-Standard Series. . . . . . . . . . . . . . . . . . . . . . . . 15
Hydraulic and Transmission Connectors-Standard Series. . . . . . . . . . . . . . . . . . 16
R-Series Coolant and Engine Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
R-Series Hydraulic and Transmission Connectors. . . . . . . . . . . . . . . . . . . . . . . . 18
Flush Face Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Grease Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Fuel Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22
Swivels and 1500 PSI Connector Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Break Away Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3” Inch Fuel Nozzle and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Special Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Bulk Transfer Nozzle & P-Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

www.flomaxinternational.com • 801.489.3329
1 Fuel Nozzles 1 1/2”
FloMAX Fuel nozzles have our patented modular back pressure sensor for reliable and repeatable shut off results every time. Our all metal
construction ensures a long and durable life for the nozzle. Our FNBL nozzle can flow over 180 GPM (682 LPM) with an 1 ½” hose and over
211 GPM with a 2” feed hose and a high pressure nozzle shut off. That is the highest flowing 1 ½” fuel nozzle in the industry. It is easily cleaned
and serviced in the field with our easy to remove pullback assembly.
• Highest flow rate of any 1 ½” diesel nozzle with a 1 ½” hose. • All metal construction with stainless steel nose.
• Lightest diesel nozzle in industry 5 lbs 14 oz. • Factory adjustable shut off pressures.
• Will not flow when not connected to receiver.

FNBL

The FNBL has a “Ball Lock”

system that attaches nozzle
to receiver.

FNBL FNBL-NI-P
This non-interchangeable nozzle is used to help prevent theft or use with
Part No. Description
different bio diesel blends. Will not connect to standard fuel receivers.
FNBL-P Fuel Nozzle with Ball Lock with Swivel and Plug
Part No. Description
FNBL Fuel Nozzle with Ball Lock with Swivel No Plug
*FNBL-NI-P Fuel Nozzle Non-Interchangeable w/ Swivel and Plug
FNBL-P-NS Fuel Nozzle with Ball Lock with Plug No Swivel
FNBL-NI Fuel Nozzle Non-Interchangeable w/ Swivel No Plug
FNBL-NS Fuel Nozzle with Ball Lock No Swivel No Plug
FNBL-NI-P-NS Fuel Nozzle Non-Interchangeable w/ Plug No Swivel
FNBL Repair Fuel Nozzle Repair
FNBL-NI-NS Fuel Nozzle Non-Interchangeable w/ No Swivel No Plug
*FNBL-NI-P Fuel Nozzle Non-Interchangeable w/ Swivel and Plug
FN600
Part No. Description
FN600 Fuel Nozzle with Swivel and Plug
FN600-NS Fuel Nozzle with Plug No Swivel
FN600 Plug Fuel Nozzle Sealing Plug
FN600 Repair Fuel Nozzle Repair * Must be used w/ the FRA-NI-C fuel receiver.

www.flomaxinternational.com • 801.489.3329
 Fuel Nozzles 1 1/2” 2
FloMAX Fuel nozzles have our patented modular back pressure sensor for reliable and repeatable shut off results every time. Our all metal
construction ensures a long and durable life for the nozzle. FN600 nozzle can flow up to 180 GPM (682 LPM) with an 1 ½” hose and over 211
GPM with a 2” feed hose and a high pressure nozzle shut off. That is the highest flowing 1 ½” fuel nozzle in the industry. It is easily cleaned
and serviced in the field with our easy to remove pullback assembly.
• Highest flow rate of any 1 ½” diesel nozzle. • All metal construction with stainless steel nose.
• Lightest diesel nozzle in industry 5 lbs 14 oz. • Factory adjustable shut off pressures.

FN600

The FN600 has a “Dog

Lock” system to attach
nozzle to receiver.

FNBL-NI-P

FRA-NI-C

www.flomaxinternational.com • 801.489.3329
3 Fuel Nozzles 2” FN800
FloMAX FN800 fuel nozzles have our patented modular back pressure sensor for reliable and repeatable shut off results at all flows, every
time. It is the highest flowing 1 ½” fuel nozzle in the industry with a 211+ GPM (800 LPM+) rating with a 2” inlet hose. It is easily cleaned and
serviced in the field with our easy to remove pullback assembly. Factory adjustable shut off pressure. Will not flow when not connected to a
receiver.
• Highest flowing 1½” nozzle in the industry, 211+ GPM. • All metal construction with stainless steel nose.
• Simple upgrade from the standard FNBL or FN600 nozzle. • Used with standard fuel receivers.

FN800

FN-EMOUNT

Part No. Description Electronic lock out

FN800-P Fuel nozzle with ball lock, 2” inlet swivel and plug fuel nozzle mount
FN800 Fuel nozzle with ball lock, 2” inlet swivel, No Plug interfaces with all
FN800-P-NS Fuel nozzle with ball lock, with Plug, No swivel standard 1 1/2” fuel
FN800 FN800-NS Fuel nozzle w/ ball lock, No swivel, No Plug
nozzles. Helps prevent
FN-EMOUNT Fuel nozzle electronic mount
fuel nozzle and equipment
damage due to non-stowage.

www.flomaxinternational.com • 801.489.3329
 Fuel Nozzles 2” FX1500 4
FloMAX FX1500 2” fuel nozzle uses the same all metal construction as our industry leading FNBL nozzle and also has the patented back
pressure sensor. It is the highest flowing fuel nozzle in the industry with flows over 400 GPM (1500+LPM).
• Highest flowing 2” nozzle in the industry, 400 GPM. • All metal construction with stainless steel nose. • Simple
upgrade from the 1 ½” system. • Connects to our 2” FRX Fuel Receiver. • Receiver mounts in 2” NPT Bung.

FX1500

FRX-C 2”

Part No. Description

FX1500 2” High Flow Fuel Nozzle with No Swivel No Plug
FX1500-S 2” High Flow Fuel Nozzle with Swivel No Plug
FX1500-P 2” High Flow Fuel Nozzle Plug No Swivel
FX1500-S-P 2” High Flow Fuel Nozzle with Swivel and Plug
FX1500 Plug 2” High Flow Fuel Nozzle Sealing Plug
FX1500 Repair 2” High Flow Fuel Nozzle Repair

www.flomaxinternational.com • 801.489.3329
5 Cross Section
Flomax Competition
Fuel Receiver Fuel Receiver
Venturi design Highly restrictive Spring in flow path
increases and poppet increases creates turbulence,
smoothes the back pressure and restriction and
flow of fuel. Patented internal decreases flow.
spring creates vibration. This
a smooth flow causes pre-mature
path and less failure of the fuel
vibration. nozzle poppet.

FX1500
Vulcanized viton double rib seal for Flows up to 400 GPM (1500 CPM)
ultimate sealing to the receiver.
Double fluorosilicone O-rings for Aircraft grade
long life in all temperatures. aluminum pullback. Nickle plated wear sleeve for long
lasting reliable performance.

2 fluorosilicone O-rings for exceptional

cold and hot weather performance.

Stainless steel nose for added

strength and durablility. Patented modular back pressure
Radiused dynamic 2” inlet for increased flow. sensor ensures linear shut off at
smooth flow path. all flow rates.
• Highest flowing 2” nozzle in the industry, 400 GPM. • All metal construction with stainless steel nose.
• Simple upgrade from the 1 ½” system. • Connects to our 2” FRX Fuel Receiver. • Receiver mounts in 2” NPT Bung.

FNBL
Flows up to 211 GPM, with the same features
listed on the FX1500 above.

1 ½” inlet.

• Highest flowing 1 ½” nozzle in the industry, 211 GPM. • All metal construction with stainless steel nose.
• Simple upgrade from the 1 ½” system. • Connects to our 1 ½” Fuel Receiver. • Receiver mounts in 2” NPT Bung.

www.flomaxinternational.com • 801.489.3329
 Tank Filling Time 6
Time to Fill a Fuel Tank in Seconds per Inch
180 GPM: 1.9 sec/in 3.3 sec/in 5.2 sec/in 7.5 sec/in
150 GPM: 2.2 sec/in 4.0 sec/in 6.2 sec/in 9.0 sec/in
120 GPM: 2.8 sec/in 5.0 sec/in 7.8 sec/in 11.2 sec/in

TANK SIZE IN FEET 3'X3'

TANK SIZE CU. IN 1,296 in2

• Fuel rises faster in a tall, narrow 4'X4'

tank than shorter and wider tanks. 2,300 in2

• Enough ullage needs to be left at the top of the tank 5'X5'

to accommodate for fill rate and tank size and shape. 3,600 in2

• Improper and inadequate venting is a common cause of filling

problems when using high fill rate nozzles. 6'X6'
5,184 in2
• Make sure there is a free and unrestricted air path out of the tank.

Factors that affect fuel nozzle shut off

• Tall narow tank which can increase head pressure on the receiver
• Long or circuitous flow path of feed hose after receiver.
• Inadequate venting of tank causing pressurization while filling.
• Restriction in flow path after the receiver.
• Low pressure nozzle not correct for tank configuration

Factors that can cause fuel to spill out of vent

• Too short of a internal stem vent. Does not allow proper pressurization prior to overfilling tank.
• Non pressure system sensing line is damaged or not hooked up.
• Too slow of a fill rate to properly operate the nozzle. Needs to be 40 GPM minimum.
• High pressure nozzle not correct for tank configuration and ullage.

Factors that can affect non pressure fueling systems

• Most systems need a higher pressure shut off nozzle to function correctly.
• Filling at too low of a fill rate. Needs to be 40 GPM minimum.
• Sensing line between vent and receiver is blocked or disconnected or damaged.
• Inadequate venting of tank.
• Restricted vent holes during installation.

www.flomaxinternational.com • 801.489.3329
7 External Line Non-Pressure Fueling System
External system is rated at 400 GPM with our standard fuel nozzles. Our external line system fits into all standard 2” NPT openings.
• Patent pending design reduces fuel foaming and increases flow due to an unrestricted “straight through”
flow path. • Factory tested prior to shipping. • Integrated roll over spill protection. • Optional rotatable vent top.
• The FloMAX external line system can flow over 400 GPM, higher flow rates than all other competitors. • All stainless
steel and aircraft grade aluminum construction means they are built to last. • Compatible with all tank types (plastic
& steel).

NPS-1

NPS Filter Kit

Part No. Description Part No. Description

NPS-1 External Kit with Rec., hose and fitting NPS-Filter Kit NPS Filter Kit, bracket and filter
NPS-1-NH External Kit with Rec. no hose, fitting NPS-FB NPS Filter Bracket Black anodized
NPS-1-F External Kit with vent top, hose, fittings NPS-Filter NPS Filter
NPS-1-F-NH External Kit with vent top, no hose,fittings VT-NP-E Non-Pressure 2” Vent external hose applications
NPV Non Pressure Valve External

www.flomaxinternational.com • 801.489.3329
 Internal Line Non-Pressure Fueling System 8
All stainless steel and aircraft grade aluminum construction means they are built to last. Our internal line system fits into all standard 2” NPT
openings and the receiver is the same size as a STANDARD FUEL RECEIVER! All of your current safety enclosures and panel boxes will still work
as designed with our internal non-pressure system. This demonstrates FloMAX innovation.
• Patent pending design reduces fuel foaming and increases flow due to an unrestricted “straight through” flow path.
• Compatible with all tank types (plastic and steel). • Integrated roll over spill protection. • Factory tested prior
to shipping. • Optional rotating vent top. • Internal system is rated at 200 GPM with our standard fuel nozzles.
• Optional rotating vent top.

Rotatable
Vent Top NPS-2

VT-NP-C

VT-NP-F-I

Part No. Description Part No. Description

NPS-2 Internal Kit with hose and fittings NPS-Filter Kit NPS Filter Kit, bracket and filter
NPS-2-NH Internal Kit no hose, fittings NPS-FB NPS Filter Bracket Black anodized
NPS-2-F Internal Kit with vent top, hose, fittings NPS-Filter NPS Filter
NPS-2-F-NH Internal kit with vent top, no hose, fittings VT-NP-I Non-Pressure 2” Vent Internal hose applications
FR-NP-C Non Pressure Valve Internal

www.flomaxinternational.com • 801.489.3329
9 Non Pressure System Tank Configuration
External System: 400 GPM Capable Internal System: Fits in standard enclosures,
Drop Down tube is preferred installation on both 200 GPM Capable, Excellent slosh resistance
vent types.
Remove rubber cover and screen before
installing drop hose.

External Tank Empty External Tank Full

Drop Down Tube Drop Down Tube

Internal Tank Empty Internal Tank Full

Drop Down Tube Drop Down Tube

Note: All tanks shown with green drop down tubes.

www.flomaxinternational.com • 801.489.3329
 Non Pressure System Installation 10
Always use a high pressure shut off fuel nozzle for all non pressure system installations.

Drop Down Tube

Installation tips:
• Keep the sensing line hose free of excessive bends; less than three 90° bends preferred. The external
hose may need to be cut to length.
• The internal NPS hose connections are located on the bottom of the VT-NP and the rear of the FR-NP.
• The external NPS hose connections are located above the threads where the VT-NP mounts to the tank
and one of the three ports on the exterior of the NPV.
• For the external system, the NPV mounts between the tank and a low pressure fuel receiver. The NPV
has a specified flow direction that is indicated on the part.
• For the internal system, the FR-NP retains the same dimensions as a standard fuel receiver and
mounts directly to the tank.

www.flomaxinternational.com • 801.489.3329
11 Fuel Receivers
All FloMAX Fuel receivers have our patented enclosed poppet stem spring for a smooth and higher flowing fuel path. This greatly enhances the
life of both the receiver and fuel nozzle due to the decrease in fuel restriction and vibration.
Our FR-RS series of fuel receivers have a patented removable stainless steel wear sleeve. This revolutionary patented concept allows the fuel
receiver wear surface to be replaced very quickly and easily without removing the fuel receiver from the tank or the loss of any fuel. It uses the
same internal spring concept that has been so successful in our other receivers.
• Patented internal spring reduces vibration and increases flow. • Patented removable wear sleeve allows easy
replacement without draining tank (FR-RS Only). • Available in both standard and low pressure models.

FRA-AT-C FRS-61
FR-RS
FRX-C 2”

Part No. Description Part No. Description

FRS Fuel Receiver - Steel FR-RS-R Fuel Receiver w/REM Sleeve - Replacement Sleeve
FRS-C Fuel Receiver - Steel with Cap FRA-NI* Fuel Receiver Non-Interchangble
FRA Fuel Receiver - Aluminum FRA-NI-C* Fuel Receiver Non-Interchangble, with Cap
FRA-C Fuel Receiver - Aluminum With Cap FRX Fuel Receiver 2”
FRA-AT Fuel Receiver Aluminum - Anti Theft FRX-C Fuel Receiver 2” with Cap
FRA-AT-C Fuel Receiver Aluminum - Anti Theft with Cap FRX Cap Fuel Receiver 2” Cap
FR-RS Fuel Receiver w/Removable Sleeve FR Cap Fuel Receiver Cap
FR-RS-AT Fuel Receiver w/Removable Sleeve - Anti Theft FR P Cap Fuel Receiver Cap - Push -On Mechanically Locking
FR-RS-AT-C Fuel Receiver w/REM Sleeve - Anti Theft with Cap FRS-61 Stainless Fuel Receiver Code 61 Flange
FRS-61-C Stainless Fuel Receiver Code 61 Flange w/Cap
*, USE WITH FNBL-NI ONLY See Page 2

FR-P Cap FR-P Cap and FRX-P Cap Available.

Spring Clip Option Available For All
Fuel Receivers.
FR P Cap and FRX P Cap are a Flomax innovation for an easily
installed and removed fuel receiver cap. The push to connect design
allows easy installation in all weather conditions. The FR P cap fits all
standard fuel receivers. The FRX P Cap fits our high flowing 2” FRX
Fuel receivers.

www.flomaxinternational.com • 801.489.3329
 3/4” Connectors 12
FloMAX has a unique series of connectors designed for great fluid flow and to help prevent cross contamination. Each colored connector is non-
interchangeable with the other color connectors. All wear components are made from Stainless steel and non-wear components are aircraft
grade anodized aluminum. The stainless steel latching mechanism ensures a long lasting and robust connection every time.
• FloMAX invented the non-interchangeable series of connectors. • Eliminates cross contamination.
• All metal construction ensures longevity. • 50 GPM. • NPTM ¾” Thread Size. • 500 PSI Working Press.
Colors
Available:
ENBL ERS
JIC Ends
Available

ERJ

Part No. Description Part No. Description

ENBL #1 Engine Nozzle Ball Lock #1 - Red ENBL #4 Engine Nozzle Ball Lock #4 - Violet
ENBL-P #1 Engine Nozzle Ball Lock w/ Plug #1 - Red ENBL-P #4 Engine Nozzle Ball Lock w/ Plug #4 - Violet
ENBL #1 Plug Engine Nozzle Ball Lock Plug #1 - Red ENBL #4 Plug Engine Nozzle Ball Lock Plug #4 - Violet
ERS #1 Engine Receiver #1 - Red ERS #4 Engine Receiver #4 - Violet
ERS-C #1 Engine Receiver w/ Cap #1 - Red ERS-C #4 Engine Receiver w/ Cap #4 - Violet
ERS #1 Cap Engine Receiver Cap #1 - Red ERS #4 Cap Engine Receiver Cap #4 - Violet
ERJ #1 Engine Receiver with JIC Bulkhead Base #1 - Red ERJ #4 Engine Receiver with JIC Bulkhead Base #4 - Violet
ERJ-C #1 Engine Receiver w/JIC Bulkhead Base w/ Cap #1 - Red ERJ-C #4 Engine Receiver w/ JIC Bulkhead Base w/ Cap #4 - Violet
ENBL #2 Engine Nozzle Ball Lock #2 - Gold ENBL #5 Engine Nozzle Ball Lock #5 - Navy
ENBL-P #2 Engine Nozzle Ball Lock w/ Plug #2 - Gold ENBL-P #5 Engine Nozzle Ball Lock w/ Plug #5 - Navy
ENBL #2 Plug Engine Nozzle Ball Lock Plug #2 - Gold ENBL #5 Plug Engine Nozzle Ball Lock Plug #5 - Navy
ERS #2 Engine Receiver #2 - Gold ERS #5 Engine Receiver #5 - Navy
ERS-C #2 Engine Receiver w/ Cap #2 - Gold ERS-C #5 Engine Receiver w/ Cap #5 - Navy
ERS #2 Cap Engine Receiver Cap #2 - Gold ERS #5 Cap Engine Receiver Cap #5 - Navy
ERJ #2 Engine Receiver with JIC Bulkhead Base #2 - Gold ERJ #5 Engine Receiver with JIC Bulkhead Base #5 - Navy
ERJ-C #2 Engine Receiver w/ JIC Bulkhead Base w/ Cap #2 - Gold ERJ-C #5 Engine Receiver w/ JIC Bulkhead Base w/ Cap #5 - Navy
ENBL #3 Engine Nozzle Ball Lock #3 - Teal ENBL #6 Engine Nozzle Ball Lock #6 - Copper
ENBL-P #3 Engine Nozzle Ball Lock w/ Plug #3 - Teal ENBL-P #6 Engine Nozzle Ball Lock w/ Plug #6 - Copper
ENBL #3 Plug Engine Nozzle Ball Lock Plug #3 - Teal ENBL #6 Plug Engine Nozzle Ball Lock Plug #6 - Copper
ERS #3 Engine Receiver #3 - Teal ERS #6 Engine Receiver #6 - Copper
ERS-C #3 Engine Receiver w/ Cap #3 - Teal ERS-C #6 Engine Receiver w/ Cap #6 - Copper
ERS #3 Cap Engine Receiver Cap #3 - Teal ERS #6 Cap Engine Receiver Cap #6 - Copper
ERJ #3 Engine Receiver with JIC Bulkhead Base #3 - Teal ERJ #6 Engine Receiver with JIC Bulkhead Base #6 - Copper
ERJ-C #3 Engine Receiver w/ JIC Bulkhead Base w/ Cap #3 - Teal ERJ-C #6 Engine Receiver w/ JIC Bulkhead Base w/ Cap #6 - Copper

www.flomaxinternational.com • 801.489.3329
13 High Flow 1” Connectors
The High Flow series of connectors have the same non interchangeable feature as the ¾” series but are in a higher flowing 1” NPT size.
• Flow rate of 113 GPM. • Seven Non interchangeable colors. • 1” NPT base. • 500 PSI Operating Pressure.

HFN HFR Colors

Available:

Part No. Description Part No. Description

HFN #1 High Flow Nozzle #1 - Red HFR #4 High Flow Receiver #4 - Violet
HFN-P #1 High Flow Nozzle w/ Plug #1 - Red HFR-C #4 High Flow Receiver w/ Cap #4 - Violet
HFN #1 Plug High Flow Nozzle Plug #1 - Red HFR #4 Cap High Flow Receiver Cap #4 - Violet
HFR #1 High Flow Receiver #1 - Red HFN #5 High Flow Nozzle #5 - Navy
HFR-C #1 High Flow Receiver w/ Cap #1 - Red HFN-P #5 High Flow Nozzle w/ Plug #5 - Navy
HFR #1 Cap High Flow Receiver Cap #1 - Red HFN #5 Plug High Flow Nozzle Plug #5 - Navy
HFN #2 High Flow Nozzle #2 - Gold HFR #5 High Flow Receiver #5 - Navy
HFN-P #2 High Flow Nozzle w/ Plug #2 - Gold HFR-C #5 High Flow Receiver w/ Cap #5 - Navy
HFN #2 Plug High Flow Nozzle Plug #2 - Gold HFR #5 Cap High Flow Receiver Cap #5 - Navy
HFR #2 High Flow Receiver #2 - Gold HFN #6 High Flow Nozzle #6 - Copper
HFR-C #2 High Flow Receiver w/ Cap #2 - Gold HFN-P #6 High Flow Nozzle w/ Plug #6 - Copper
HFR #2 Cap High Flow Receiver Cap #2 - Gold HFN #6 Plug High Flow Nozzle Plug #6 - Copper
HFN #3 High Flow Nozzle #3 - Teal HFR #6 High Flow Receiver #6 - Copper
HFN-P #3 High Flow Nozzle w/ Plug #3 - Teal HFR-C #6 High Flow Receiver w/ Cap #6 - Copper
HFN #3 Plug High Flow Nozzle Plug #3 - Teal HFR #6 Cap High Flow Receiver Cap #6 - Copper
HFR #3 High Flow Receiver #3 - Teal HFN #7 High Flow Nozzle #7 - Blue/Grey
HFR-C #3 High Flow Receiver w/ Cap #3 - Teal HFN-P #7 High Flow Nozzle w/ Plug #7 - Blue/Grey
HFR #3 Cap High Flow Receiver Cap #3 - Teal HFN #7 Plug High Flow Nozzle Plug #7 - Blue/Grey
HFN #4 High Flow Nozzle #4 - Violet HFR #7 High Flow Receiver #7 - Blue/Grey
HFN-P #4 High Flow Nozzle w/ Plug #4 - Violet HFR-C #7 High Flow Receiver w/ Cap #7 - Blue/Grey
HFN #4 Plug High Flow Nozzle Plug #4 - Violet HFR #7 Cap High Flow Receiver Cap #7 - Blue/Grey

www.flomaxinternational.com • 801.489.3329
 High Flow Nozzle - Receiver Flow Rates 14
The High Flow Nozzle (HFN) and High Flow Receiver (HFR) line of dry break fittings consist of
seven sets of fittings with each pair offering a minimum flow area equivalent to 1” schedule
80 pipe. The fittings incorporate the following design features:

1) The receiver and nozzle of each set will only couple with each other offering
complete protection against cross contamination of fluids.
2) Receiver and nozzle sets are color coded to simplify identification of matching
component sets.
3) All wear parts are constructed of 416 stainless steel for long life and corrosion
resistance.
4) All non-wear components are constructed of anodized 6061 alloy aluminum for
high strength, light weight, and corrosion resistance.
5) All fittings have a 500 psi working pressure rating with 1500 psi minimum burst
pressure rating.
6) The standard mounting is 1” male NPT for all receivers and 1” female NPT for all
nozzles with optional mounting configurations available.
7) All fittings incorporate a “ball lock” mechanism with 7/32” 440-C grade stain-
less steel balls to insure smooth and reliable operation.
8) Maximum flow rate using ISO 46 hydraulic oil (third party tested) is 113 gpm
(428 lpm).

Physical Description:
Length Diameter Hex Size Weight
Nozzle 3.92” 100mm 2.50” 64mm 2” 51mm 1.3 lbs. 640g
Receiver 3.40” 86mm 1.85” 47mm 2” 51mm 0.6 lbs. 320g
Coupled Set 5.35” 136mm

www.flomaxinternational.com • 801.489.3329
15 Coolant and Engine Connectors-Standard Series
FloMAX standard series connectors are fully compatible and interchangeable with industry standard connectors. They are 100% metal
construction using stainless steel and anodized aircraft grade aluminum. The color coded and labeled mating components provide for quick
and positive identification.
• All metal construction ensures reliable performance. • Fits all industry standard connectors.
• Color coded for quick and easy identification.

Coolant Nozzle Coolant Receiver

1.05
1.26
1.52
1 3/16 Hex 2.33 7/8 Hex 2.02

1/2 NPT 1/2 NPT

Part No. Description Part No. Description

CN Coolant Nozzle CR Coolant Receiver
CN-P Coolant Nozzle w/ Plug CR-C Coolant Receiver w/ Cap
CN Plug Coolant Nozzle Plug CR Cap Coolant Receiver Cap

Engine Nozzle Engine Receiver

• 50 GPM • 50 GPM
• 500 PSI • 500 PSI
Working Working
Pressure 2.0 Pressure 1.77
2.81 1 3/8 Hex 2.58
1.625 Hex

3/4 NPT
3/4 NPT

Part No. Description Part No. Description

ENBL Engine Nozzle Ball Lock ERS Engine Receiver
ENBL-P Engine Nozzle Ball Lock w/ Plug ERS-C Engine Receiver w/ Cap
ENBL Plug Engine Nozzle Ball Lock Plug ERS Cap Engine Receiver Cap
ERJ Engine Receiver with JIC Bulkhead Base
UN34-P UN34 ERJ-C Engine Receiver with JIC Bulkhead Base w/ Cap
UN34 Universal 3/4” Series Draining Nozzle
UN34-P Universal 3/4” Series Draining Nozzle w/Plug

UN34 and 34P Universal extraction nozzles fits all

ERS 3/4 series receivers for easy evacuation and
draining of tanks.

www.flomaxinternational.com • 801.489.3329
 Hydraulic and Transmission Connectors-Standard Series 16
FloMAX standard series connectors are fully compatible and interchangeable with industry standard connectors. They are 100% metal
construction using stainless steel and anodized aircraft grade aluminum. The color coded and labeled mating components provide for quick
and positive identification.
• All metal construction ensures reliable performance. • Fits all industry standard connectors.
• Color coded for quick and easy identification.

Hydraulic Nozzle Hydraulic Receiver

1.60
1.86
2.25
1.625 Hex 3.05 1.625 Hex 2.66

3/4 - 14 NPT
3/4 - 14 NPT

Part No. Description Part No. Description

HN Hydraulic Nozzle HR Hydraulic Receiver
HN-P Hydraulic Nozzle w/ Plug HR-C Hydraulic Receiver w/ Cap
HN Plug Hydraulic Nozzle Plug HR Cap Hydraulic Receiver Cap

Transmission Nozzle Transmission Receiver

1.25
1.20
1.75
7/8 Hex 1.75
1 1-16 Hex 2.55

3/8 - 18 NPT

1/2 - 14 NPT

Part No. Description Part No. Description

TN Transmission Nozzle TR Transmission Receiver
TN-P Transmission Nozzle w/ Plug TR-C Trans. Receiver w/ Cap
TN Plug Transmission Nozzle Plug TR Cap Trans. Receiver Cap

www.flomaxinternational.com • 801.489.3329
17 R-Series Coolant and Engine Connectors
FloMAX R-Series connectors are fully compatible and interchangeable with industry standard R-series connectors. They are 100% metal
construction using stainless steel and anodized aircraft grade aluminum. The color coded and labeled mating components provide for quick
and positive identification.
• All metal construction ensures long and reliable performance. • Fits all industry R-series connectors.
• Color coded for quick and easy identification.

Coolant Nozzle Coolant Receiver

1.33 1.22
2.50 1 1/4 HEX
1 1/8 Hex 2.53 1.1870 2.23
12UN - 2A
1/2 NPT
.875
1/4 UN - 2B

Part No. Description Part No. Description

R-CN R-Series Coolant Nozzle R-CR R-Series Coolant Receiver
R-CN-P R-Series Coolant Nozzle w/ Plug R-CR-C R-Series Coolant Receiver w/ Cap
R-CN Plug R-Series Coolant Nozzle Plug R-CR Cap R-Series Coolant Receiver Cap

Engine Nozzle Engine Receiver

1.50
1 3/4 Hex
2.25
1.625 2.50
3.04
1.625 Hex 12UN - 2A

1.312
3/4 NPT 12UN - 2B

Part No. Description Part No. Description

R-EN R-Series Engine Nozzle R-ER R-Series Engine Receiver
R-EN-P R-Series Engine Nozzle w/ Plug R-ER-C R-Series Engine Receiver w/ Cap
R-EN Plug R-Series Engine Nozzle Plug R-ER Cap R-Series Engine Receiver Cap

www.flomaxinternational.com • 801.489.3329
 R-Series Hydraulic and Transmission Connectors 18
FloMax R-Series Coolant and Engine connectors are fully compatible and interchangeable w/ industry standard R-Series connectors. The caps,
plugs, and connectors are manufactured using aircraft grade anodized aluminum and color coded for quick and easy identification.
• All metal construction ensures long and reliable performance. • Fits all industry R-series connectors.
• Color coded for quick and easy identification.

Hydraulic Nozzle Hydraulic Receiver

1.57
1.74
2.42
1 3/4 Hex 2.80
3.42
1 1/4 Hex 1.875
12UN - 2A

1.625
1.0 NPT 12UN - 2B

Part No. Description Part No. Description

R-HN R-Series Hydraulic Nozzle R-HR R-Series Hydraulic Receiver
R-HN-P R-Series Hydraulic Nozzle w/ Plug R-HR-C R-Series Hydraulic Receiver w/ Cap
R-HN Plug R-Series Hydraulic Nozzle Plug R-HR Cap R-Series Hydraulic Receiver Cap

Transmission Nozzle Transmission Receiver

1.42 1.40
1.98 1 3/8 Hex
2.83 2.45
1.312
1 3/8 Hex
12UN - 2A
3/4 NPT
1.062
12UN - 2B

Part No. Description Part No. Description

R-TN R-Series Transmission Nozzle R-TR R-Series Transmission Receiver
R-TN-P R-Series Trans. Nozzle w/ Plug R-TR-C R-Series Trans. Receiver w/ Cap
R-TN Plug R-Series Transmission Nozzle Plug R-TR Cap R-Series Trans. Receiver Cap

www.flomaxinternational.com • 801.489.3329
19 Flush Face Connectors
Our Patented non-interchangeable feature means each color will only mate with its corresponding colored receiver or nozzle.
• New patented design uses an internally sealed ball lock mechanism to ensure trouble free performance even in
the most harsh of conditions. • 12 color choices and sizes are available along with a universal evacuation nozzle.
Additional special order sizes and colors are also available. • Hardened stainless steel receiver nose ensures
that FloMAX Flush Face connectors can be operated at a higher pressure than many other dry break connectors.
• All of the Flush Face connectors have the exact same outside dimensions. • Can be connected or disconnected
under pressure. • Can be connected without pulling back on the nozzle pullback. • Flush Face Nozzle and Receiver
available in JIC base configuration. • 500 PSI Working Pressure. • 50 GPM Flow Rate.
Colors
Flush Face Nozzle *Also Available in ¾ Female NPT Flush Face Receiver Available:

2.29 2.22
3.12 3.04
1 5/8 Hex
1 7/8 Hex

3/4 NPTM 3/4 NPTM

Part No. Description Part No. Description

FLN #1 Flush Face Nozzle - Red FLR #1 Flush Face Receiver - Red
FLN #2 Flush Face Nozzle - Gold FLR #2 Flush Face Receiver - Gold
FLN #3 Flush Face Nozzle - Teal FLR #3 Flush Face Receiver - Teal
FLN #4 Flush Face Nozzle - Purple FLR #4 Flush Face Receiver - Violet
FLN #5 Flush Face Nozzle - Dark Blue FLR #5 Flush Face Receiver - Dark Blue
FLN #6 Flush Face Nozzle - Brown FLR #6 Flush Face Receiver - Brown
FLN #7 Flush Face Nozzle - Blue/Gray FLR #7 Flush Face Receiver - Blue/Gray
FLN #8 Flush Face Nozzle - Clear FLR #8 Flush Face Receiver - Clear
FLN #9 Flush Face Nozzle - Dark Green FLR #9 Flush Face Receiver - Dark Green
FLN #10 Flush Face Nozzle - Gray Nl FLR #10 Flush Face Receiver - Gray Nl
FLN #11 Flush Face Nozzle - Bronze FLR #11 Flush Face Receiver - Bronze
FLN #12 Flush Face Nozzle - Orange FLR #12 Flush Face Receiver - Orange
FLN #16 Flush Face EVAC Nozzle - Black

FLN #16 Universal

Drain Nozzle Fits
All FLR Receivers.

www.flomaxinternational.com • 801.489.3329
 Grease Fittings 20
FloMAX Flush Face Grease Connectors
US PATENT #9708173
• Can be connected and disconnected under pressure. An industry first, demonstrating Flomax
innovation. • 5000 PSI rated. • New patented design uses an internally sealed ball lock mechanism
to ensure trouble free performance even in the most harsh of conditions. • All Stainless Steel
construction ensures long life and repeatable performance. • Receiver has a built in check valve.
• 1” FNPT on both receiver and nozzle for maximum flow and adaptability. • World Class performance
and flow. • Fail Safe shut off for safety. • Flush face design helps ensure vehicle and part cleanliness.
• Two sizes available.

www.flomaxinternational.com • 801.489.3329
21 Fuel Vents
FloMAX fuel vents are made from all metal components. Our billet aircraft grade aluminum cap provides superior strength and impact resistance
as compared to the inferior and weaker plastic and cast aluminum caps on other vents. The float and sealing balls are housed in a rigid
aluminum ball tube. This ensures a positive seal and repeatable performance. The stem tubes are available in standard 5”, 7”, 9”, 11” and
custom customer specified lengths. Several configurations are available including threaded outlets, rotatable vent top, anti-vandalism and half
couplings for welding into a tank.
• Captured ball design ensures repeatable performance. • Robust all billet aluminum construction.
• Available in different lengths and outlet/inlet configurations.

VT-T VT

Standard Fuel Vents

Part No. Description Part No. Description
VT Fuel Vent - Standard (5” stem) VT-TF Fuel Vent - Female Threaded Outlet (5” stem)
VT-7 Fuel Vent - Ext Stem (7” stem) VT-TF-7 Fuel Vent - Female Threaded Outlet (7” stem)
VT-9 Fuel Vent - Ext Stem (9” stem) VT-TF-9 Fuel Vent - Female Threaded Outlet (9” stem)
VT-11 Fuel Vent - Ext Stem (11” stem) VT-TF-11 Fuel Vent - Female Threaded Outlet (11” stem)
VT-C Fuel Vent - w/Half Coupling (5” stem) VTF Fuel Vent with Filter - Standard (5” stem)
VT-C-7 Fuel Vent - w/Half Coupling (7” stem) VTF-7 Fuel Vent with Filter - Standard (7” stem)
VT-C-9 Fuel Vent - w/Half Coupling (9” stem) VTF-9 Fuel Vent with Filter - Standard (9” stem)
VT-C-11 Fuel Vent - w/Half Coupling (11” stem) VTF-11 Fuel Vent with Filter - Standard (11” stem)
VT-A Sleeve Fuel Vent - Anti Vandalism Sleeve VTF-T Fuel Vent with Filter - Male Threaded Outlet (5” stem)
VT-A-7 Fuel Vent - Anti Vandalism (7” stem) VTF-T-7 Fuel Vent with Filter - Male Threaded Outlet (7” stem)
VT-A-9 Fuel Vent - Anti Vandalism (9” stem) VTF-T-9 Fuel Vent with Filter - Male Threaded Outlet (9” stem)
VT-A-11 Fuel Vent - Anti Vandalism (11” stem) VTF-T-11 Fuel Vent with Filter - Male Threaded Outlet (11” stem)
VT-T Fuel Vent - Male Threaded Outlet (5” stem) VTF-TF Fuel Vent with Filter- Female Threaded Outlet (5” stem)
VT-T-7 Fuel Vent - Male Threaded Outlet (7” stem) VTF-TF-7 Fuel Vent with Filter- Female Threaded Outlet (7” stem)
VT-T-9 Fuel Vent - Male Threaded Outlet (9” stem) VTF-TF-9 Fuel Vent with Filter- Female Threaded Outlet (9” stem)
VT-T-11 Fuel Vent - Male Threaded Outlet (11” stem) VTF-TF-11 Fuel Vent w/ Filter-Female Threaded Outlet (11” stem)

www.flomaxinternational.com • 801.489.3329
 Fuel Vents 22
FloMAX fuel vents are made from all metal components. Our billet aircraft grade aluminum cap provides superior strength and impact resistance
as compared to the inferior and weaker plastic and cast aluminum caps on other vents. The float and sealing balls are housed in a rigid
aluminum ball tube. This ensures a positive seal and repeatable performance. The stem tubes are available in standard 5”, 7”, 9”, 11” and
custom customer specified lengths. Several configurations are available including threaded outlets, rotatable vent top, anti-vandalism and half
couplings for welding into a tank.
• Robust all billet aluminum construction. • Available in different lengths and flow rates.• Highest flowing vent in the
industry. • Capable of handling 400 GPM fluid flows. • Fits standard 2” NPT openings.

VTX-F-RT

VTX vent is the highest flowing vent for pressure

fill applications in the industry. It can flow over
400 GPM of fluid inflows. Enough to use with our
industry leading FX1500 Fuel nozzle. Machined
ball cage is robust in all harsh environments
and will not break like spring ball cages do.

High Flow Vents

Part No. Description Part No. Description
VTX High Flow Vent - Standard (5” stem) VTX-A Sleeve High Flow Vent - Anti Vandalism Sleeve
VTX-7 High Flow Vent - Ext Stem (7” stem) VTX-A-7 High Flow Vent - Anti Vandalism (7” stem)
VTX-9 High Flow Vent - Ext Stem (9” stem) VTX-A-9 High Flow Vent - Anti Vandalism (9” stem)
VTX-11 High Flow Vent - Ext Stem (11” stem) VTX-A-11 High Flow Vent - Anti Vandalism (11” stem)
VTX-C High Flow Vent - w/Half Coupling (5” stem) VTX-F-RT-5 High Flow Vent-Filter capable rotatable top (5” stem)
VTX-C-7 High Flow Vent - w/Half Coupling (7” stem) VTX-F-RT-7 High Flow Vent Filter capable rotatable top (7” stem)
VTX-C-9 High Flow Vent - w/Half Coupling (9” stem) VTX-F-RT-9 High Flow Vent Filter capable rotatable top (9” stem)
VTX-C-11 High Flow Vent - w/Half Coupling (11” stem)

www.flomaxinternational.com • 801.489.3329
23 Swivels and 1500 PSI Connector Series
FloMAX swivels feature an all stainless steel and aircraft grade aluminum construction and have a 37% greater flow than other industry
swivels. The swivels are sealed with fluoro silicone O-rings to ensure the best performance in a variety of weather conditions. They come
in a variety of size and configurations to match up with any standard nozzle and hose sizes.
• Thirty two stainless steel ball bearings. • Durable Stainless steel and Aluminum construction.
• Many sizes and configurations are available.

FX25
2.5” Hose to FX1500 Thread
SW2 FNSID
2” NPT Male to 2” FNPT Inline Double 1½” NPTF Swivel
FNS-SP
FNBLS2 1½” NPTM to 2” NPTF
FNBL thread to 2” NPTF

FNBLS FX1500 Swivel FNS FNS2

FNBL thread to 1½” NPTF FX1500 thread to 2” NPTF 1½” NPTM to 1½” NPTF 2” NPTM to 1½” NPTF

Part No. Description Part No. Description

FNBLS FloMAX 1 1/2” Nozzle Swivel FNS Standard Fuel Swivel 1 1/2” NPT by 1 1/2” NPT
FNBLS2 FNBL nozzle thread to 2” NPT female FNS2 Standard Fuel Swivel 2” NPT by 1 1/2” NPT
FNS-SP 1 1\2” NPT x 2” NPT female SW2 Swivel 2” NPT by 2” NPT
FX1500 Swivel FloMAX 2” High Flow Nozzle Swivel FNSID Inline Double Nut Swivel 1 1/2” NPT by 1 1/2” NPT
FX25 FX1500 Turocad to 2.5” FNPT

www.flomaxinternational.com • 801.489.3329
 Break Away Valves 24
The FloMAX 2 inch and 3 inch break away valves are constructed of zinc plated steel and anodized aircraft grade aluminum. The valves are
designed with three shear studs that will break at a designated force when mounted correctly using our factory approved mount. This will help
protect expensive refueling equipment and help prevent catastrophic fuel spillage.
• Eliminates expensive equipment damage. • Eliminates catastrophic spills. • 250 PSI pressure rating.

BAV’s must be used with mounting brackets BAV3 3” NPT Valve

See BAV2M below

BAV2 2” NPT Valve

BAV2M

Part No. Description

BAV Break Away Valve 2 Inch
BAV2M Break Away Valve Mount 2 Inch
BAV3 Break Away Valve 3 Inch
BAV3M Break Away Valve Mount 3 Inch
BAV-K1 Break Away Valve Replacement Kit

www.flomaxinternational.com • 801.489.3329
25 3” Inch Fuel Nozzle and Receivers
FloMAX 3” fuel nozzles and receivers are designed for high flow volume and ease of use. They are scaled down versions of the standard API 5”
specification parts. Poppets have a vulcanized viton seal surface. Both the nozzle and receiver are made from aircraft aluminum and stainless
steel. The connectors have a flow rating of up to 1200 GPM at 100 PSI.
• Ultra High Flow for demanding fueling requirements. • Robust Billet Aluminum Construction.
• 1200 GPM at 100 PSI.

FN3 FR3

Part No. Description Part No. Description

FN3 Fuel Nozzle 3 Inch FR3-NP Fuel Recvr 3 Inch w/ Non-Pressure Valve - 4” NPT threads
FR3 Fuel Receiver 3 Inch with 3 “ NPT Base FR3-NP-4NPT 3 Inch Non-Pressure Valve with 4” NPT Front End
FR3-F Fuel Receiver 3 Inch with Flange Base FR3-NP-3NPT 3 Inch Non-Pressure Valve with 3” NPT Front End
FR3-4NPT Fuel Receiver 3 Inch with 4 “ NPT Base

FR3-F FR3-NP

www.flomaxinternational.com • 801.489.3329
 Accessories 26
FloMAX Gravity fill receivers are made from aircraft grade aluminum. They have a welded on cast aluminum handle for strength and convenience.
They come in a standard 1 ½” diameter as well as a smaller 1” diameter size for filling smaller fuel tanks. They are available in straight, 45
degree bend and a 90 degree bend configuration.
• 1 ½” and 1” sizes available. • Straight, 45 degrees and 90 degree bend. • Fits standard 1 ½” fuel receivers.
• Allows transfer of fluid without using a standard fuel receiver.

GFR GFR-45

GFR-90
GFR1

GFR1-45

GFR1-90

Part No. Description

GFR-0 Gravity Fill Fuel Receiver, Straight
GFR-45 Gravity Fill Fuel Receiver, 45 deg.
GFR-90 Gravity Fill Fuel Receiver, 90 deg.
GFR1-0 Gravity Fill Fuel Receiver 1”, Straight
GFR1-45 Gravity Fill Fuel Receiver 1”, 45 deg.
GFR1-90 Gravity Fill Fuel Receiver 1”, 90 deg.

www.flomaxinternational.com • 801.489.3329
27 Tools
FNBL-100 FNBL-102 FNBL-104

FR EX SOCKET FNM FR SOCKET

FX1500 Tools

FN600-101
FX1500-100

FX1500-102

FX1500-104
Part No. Description
FNBL-100 Poppet Spanner wrench
FNBL-102 Poppet insertion tool
Bell Housings
FNBL-104 Swivel Spanner Wrench
FR-EX Socket Fuel Receiver Socket Extended Length
BH-W BH-F
FR-Socket Fuel Receiver Socket Weld On Bolt On
FN600-101 FN600 Nose Spanner Wrench
FNM Fuel Nozzle Mount
FX1500-100 FX1500 Fuel Nozzle Poppet Spanner Wrench
FX1500-102 FX1500 Fuel Nozzle Poppet Insertion Tool
FX1500-104 FX1500 Fuel Nozzle Swivel Spanner Wrench
BH-W Bell Housing Weld On Attachment
BH-F Bell Housing Bolt On Attachment

www.flomaxinternational.com • 801.489.3329
 Special Products 28
Stainless Steel External Non Pressure System. All external components are made of 300 series Stainless Steel for long life in more
harsh and corrosive environments.
HFRE Evacuation Receiver. A special EVAC fitting to fit in the oil pans of Komatusu equipment and others. The HFRE has a special one way
check valve that only allows the fluid to be withdrawn or drained from the fitting. It helps fix the problem with some oil pans having easily
stripped out threads during repeated oil drain cycles.

HFRE-C #9 NPS-1-SS NP-SU

R-HR-C 1” NPT

HFRE

ENBL-12P

ERS-12C

Part No. Description

HFRE-C #9 Fits Komatsu Oil Pans For a Quick Drain
NP-SU Non Pressure System Low Profile Sending Unit
ERS-12C Engine Receiver Green ½” NPT
ENBL-P#12 Engine Nozzle Green ½” NPT
R-HR-C1 NPT R-HR-C with 1” NPT
R-HR-C With 1” NPTM
NPS-1-SS All External Components are 300 Stainless Steel

www.flomaxinternational.com • 801.489.3329
29 Adapters
Flomax has a large variety of adapters to fit many tank configurations.
MFF10335 MFF10577 MVA32-MF2
Small Diameter 2” NPT to 6 Bolt. Large Diameter 2” NPT to 6 Bolt. 2” NPT Male to 2: Adaptor 2” Long.

MVA32-MF3 MVA32-MF4.5 MVA32-MF2.5

2” NPT Male to Female 3” Long. 2” NPT Male to Female 4.5” Long. Face Seal to 2” NPT. 2” Long.

MVA32FL 8 bolt FR-VR MVA-32-OFS

2” NPT 8 Bolt Adapter. VR300 to 2” NPT Face Seal to 2” NPT. 4.5” Long.

SFA
Add a 2” NPTF to plastic or metal tanks.

www.flomaxinternational.com • 801.489.3329
 Bulk Transfer Nozzle & P-Caps 30
FR P Cap and FRX P Cap are a Flomax innovation for an easily installed and removed fuel receiver cap. The push to connect design allows easy
installation in all weather conditions. The FR P cap fits all standard fuel receivers. The FRX P Cap fits our high flowing 2” FRX Fuel receivers.
FR-P Cap and FRX-P Cap Available. Spring Clip Option Available For All Fuel Receivers.

FRX-BFN-P

BFN

FRX-P-Cap

FRX Fuel Receiver

FR-P Cap

2” NPT

Part No. Description

BFN Bulk Fuel Nozzle

Bulk Transfer Nozzle BFN-P Bulk Fuel Nozzle with Plug

BFN Plug Bulk Fuel Nozzle Plug
• Push to connect design
FRX-P Cap Push to Connect Cap for FRX Receivers
• Fits standard 1 ½” and 2” FRX fuel receivers FR-P Cap Push to Connect Cap for 1½” Receivers
• Allows transfer of fluid without using a fuel nozzle FRX BFN Bulk Fuel Nozzle for FRX fuel receivers
FRX-BFN-P Bulk Fuel Nozzle for FRX fuel receivers with Cap

www.flomaxinternational.com • 801.489.3329
31 Notes

www.flomaxinternational.com • 801.489.3329
 Not a page

www.flomaxinternational.com • 801.489.3329
Phone: 801-489-3329 • Fax: 801-489-3326
1295 West 1650 North • Springville, UT 84663 • USA
www.flowmaxinternational.com Rev1:10.2018