TXSR 604

TX-SR604/604E/8460
MD-2000
Ref. No. 3948

072006
SERVICE MANUAL
AV RECEIVER
MODEL TX-SR604
MODEL TX-SR604E ON/STANDBY
INPUT SELECTOR
ZONE2
REMOTE MODE
RECEIVER
TAPE
DVD
M D/CDR
MODEL TX-SR8460
1 2 3 CD
HDD
V1 V2 V3
4 5 6 TV
V4 MULTI CH DVD
7 8 9 VCR
TAPE TUNER CD
CABLE
10 11 12
+10 0 CLR SAT
D TUN ENT
--/--- DIMMER SLEEP
CH
TV VOL DISC VOL
ALBUM
INPUT
GUIDE PREVIOUS
TOP MENU MENU
MUTING
ENTER
PLAYLIST/CAT PLAYLIST/CAT
RETURN SETUP
LISTENING MODE
STEREO SURROUND
AUDIO SUBTITLE RANDOM REPEAT

TEST TONE CH SEL LEVEL- LEVEL+
PLAY MODE
DISPLAY L NIGHT CINE FLTR
VCR DVD HDD
TX-SR604 RC-651M
RC-651M
TX-SR604 Black, Golden and Silver models
B MDD, B MDC, S MDC 120V AC, 60Hz
B MPA, S MPA 230-240V AC, 50Hz
B MWT, B MWO, G MWT, G MWO 120V/220-240V AC, 50/60Hz
G MGR, G MGQ, G MGK 220-230V AC, 50/60Hz
TX-SR604E Black and Silver models

B MPP, S MPP 230-240V AC, 50Hz
TX-SR8460 Golden model

G MGR 220-230V AC, 50/60Hz
SAFETY-RELATED COMPONENT
WARNING!!
COMPONENTS IDENTIFIED BY MARK ON THE
SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.
Downloaded from www.Manualslib.com manuals search engine

TX-SR604/E604/8460
Specifications
Amplifier Section AM
Tuning Frequency
Rated Output Power (FTC) Range North American: 530 kHz - 1710 kHz
All channels: 90 watts minimum continuous power European: 522 kHz - 1611 kHz
per channel, 8 ohm loads, 2 channels Others: 522/530 kHz - 1611/1710 kHz
driven from 20 Hz to 20 kHz, with a Usable Sensitivity 300 µV/m
maximum total harmonic distortion of Signal to Noise Ratio 40 dB
0.08% THD 0.7%
110 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven at 1 kHz, with a maximum total General
harmonic distortion of 0.9%
115 watts minimum continuous power Power Supply North American: AC 120 V, 60 Hz
per channel, 6 ohm loads, 2 channels European: AC 230 - 240 V, 50 Hz
driven at 1 kHz, with a maximum total Others: AC 120/220 - 240 V, 50/60 Hz
harmonic distortion of 0.1% AC 220 - 230 V, 50/60 Hz
Rated Output Power (IEC) Power Consumption North American: 7 A
7 ch × 150 W at 6 ohms, 1 kHz, 1 ch European: 630 W
driven Others: 630/670 W
Maximum Output Power (JEITA) Standby Power
7 ch × 185 W at 6 ohms, 1 kHz, 1 ch Consumption North American: 0.1 W
driven European: 0.3 W
Dynamic Power 225 W + 225 W (3 ohm , Front) Others: 0.5 W
170 W + 170 W (4 ohm , Front) Dimensions
105 W + 105 W (8 ohm , Front) (W × H × D) 435 × 174 × 377 mm
THD (Total Harmonic 17-1/8" × 6-7/8" × 14-13/16"
Distortion) 0.08% (Power Rated)
Weight 11.4 kg
Damping Factor 60 (Front, 1 kHz, 8 ohm )
25.1 lbs.
Input Sensitivity and
Impedance 200 mV/47 k ohm (LINE)
Output Level and Video Inputs
Impedance 200 mV/470 ohm (REC OUT) HDMI IN1, IN2
Frequency Response 10 Hz - 100 kHz/+1 dB - 3 dB (Direct mode) Component IN1, IN2, IN3
Tone Control ±10 dB, 50 Hz (BASS) S-Video DVD, VIDEO1, VIDEO2, VIDEO 3,
±10 dB, 20 kHz (TREBLE) VIDEO4
Signal to Noise Ratio 106 dB (LINE, IHF-A) Composite DVD, VIDEO1, VIDEO2, VIDEO3,
Speaker Impedance North American: 6 ohm -16 ohm VIDEO4
Others: 4 ohm -16 ohm or 6 ohm -16 ohm
Video Outputs
HDMI OUT
Video Section Component OUT
Input Sensitivity/Output S-Video MONITOR, VIDEO1, VIDEO2
Level and Impedance 1 Vp-p/75 ohm (Component and S-Video Y) Composite MONITOR, VIDEO1, VIDEO2
0.7 Vp-p/75 ohm (Component P B/CB, PR/CR)
0.28 Vp-p/75 ohm (S-Video C) Audio Inputs
1 Vp-p/75 ohm (Composite) Digital Inputs Optical: 4 (1 on Front Panel)
Component Video Coaxial: 2
Frequency Response 5 Hz - 50 MHz Analog Inputs DVD (MULTICHANNEL), VIDEO1,
VIDEO2, VIDEO3, VIDEO4, TAPE, CD
Multichannel Inputs 7.1
Tuner Section
Audio Outputs
FM Digital Output 1
Tuning Frequency Range North American: 87.5 MHz - 107.9 MHz Analog Outputs TAPE, VIDEO1, VIDEO2, ZONE2
Others: 87.5 MHz - 108.0 MHz Subwoofer Pre Output 1
Usable Sensitivity Stereo: 22.2 dBf (75 ohm IHF) Speaker Outputs L, R, C, SL, SR, SBL, SBR,
Mono: 15.2 dBf (75 ohm IHF) ZONE2 (L/R)
Signal to Noise Ratio Stereo: 67 dB (IHF-A) Phones 1
Mono: 73 dB (IHF-A) IR Input 1
THD Stereo: 0.5% (1 kHz) 12V Trigger Out 1 (ZONE2)
Mono: 0.3% (1 kHz)
Frequency Response 30 Hz - 15 kHz/±1 dB
Stereo Separation 40 dB (1 kHz) Specfications and features are subject to change without
notice.

TX-SR604/604E/8460
SERVICE PROCEDURE
1. Replacing the fuses
This symbol located near the fuse indicates that the

fuse used is show operating type, For continued protection against
fire hazard, replace with same type fuse, For fuse rating, refer to
the marking adjacent to the symbol.
Ce symbole indique que le fusible utilise est e lent.

Pour une protection permanente, n'utiliser que des fusibles de meme
type. Ce demier est indique la qu le present symbol est apposre.
<Notes>
<DD> : TX-SR604 USA model <DC> : TX-SR604 Canadian model
<PA> : TX-SR604 Australian model <PP> : TX-SR604E European model
<WT> : TX-SR604 World wide model <GK> : TX-SR604 Korean model
<WO> : TX-SR604 Saudi model <GQ> : TX-SR604 Hong kong model
<GR> : TX-SR604 & TX-SR8460 Chinese model
REF NO. PART NAME DESCRIPTION PART NO. REMARKS

F901 FUSE 10A-UL/T-233 252330GR !, <DD,DC>
F901 or FUSE 10A-T/UL-ST2 252333GR !, <DD,DC>
F901 FUSE 5A-SE-EAK 252078GR !, <WO,WT,GQ,GR,GK,PA,PP>
F901 or FUSE 5A-SE-TL250V 252278GR !, <WO,WT,GQ,GR,GK,PA,PP>
F902 FUSE 5A-SE-EAK 252078GR !, <WO,WT>
F902 or FUSE 5A-SE-TL250V 252278GR !, <WO,WT>
F903 FUSE 5A-UL/T-233 252326GR !, <DD,DC>
F903 or FUSE 5A-T/UL-ST2 252258GR !, <DD,DC>
F903 FUSE 2.5A-SE-EAK 252075GR !, <WO,WT,GQ,GR,GK,PA,PP>
F903 or FUSE 2.5A-SE-TL250V 252275GR !, <WO,WT,GQ,GR,GK,PA,PP>
Q
F910 FUSE 5A-UL/T-233 252326GR !
F910 or FUSE 5A-T/UL-ST2 252258GR !
F6901 FUSE 12A-TUL-250V 252301GR !
F6902 FUSE 12A-TUL-250V 252301GR !
2. To initialize the unit

1. Press and hold down the VIDEO 1/VCR 1 button, then press the STANDBY/ON button when the unit is Power on.
2. After " Clea r " is displayed, the preset memory and each mode stored in the memory are initialized and will return to
the factory settings.
3. To check the version of microprocessor

Main microprocessor Q701 only.
1. Press and hold down the DISPLAY button , then press the STANDBY/ON button when the unit is Power on.
The version is displayed on FL display for 3 seconds.
Ex.
Ma in1.0 1 /05305A
2. Press the STANDBY/ON button to Power off.
4. Memory Backup
The AV receiver uses a battery-less memory backup system in order to retain radio presets and other settings
when it's unplugged or in the case of a power failure.
Although no batteries are required, the AV receiver must be plugged into an AC outlet in order to charge the
backup system. Once it has been charged, the AV receiver will retain the settings for several weeks,
although this depends on the environment and will be shorter in humid climates.

TX-SR604/604E/8460
OPERATION CHECK-1
SPEAKER PROTECT-1 (DC VOLTAGE DETECTION)
[When]
1. Exchange power transistors (Q6050 - Q6056, Q6060 - Q6066).
2. Exchange amplifier PC board ass'y (NAAF-8911).
[Procedure]
<Note>
No load. No input.
1. Press and hold down the CD button, then press the STANDBY/ON button while the unit is Power ON.
" Test - _ " is displayed only for 5 seconds.
T e st - _ Blinks
2. Press the VIDEO 3 button, while the characters of " Test - _ " are displayed.
The unit will be in the state of " Test-4-00 ".
T e st - 4 - 0 0
3. Repeatedly press TONE+ button until the characters of " Test-4-21 " are displayed.
T e st - 4 - 2 1
Check whether the operation starts and continues automatically as follows.
T e st - 4 - 2 1
Front L ch
Check
P r o te ct O K T e s t - 4- 2 5
Surround R ch
P r ot e c t O K Check
T e st - 4 - 2 2
Front R ch
Check
Surround Back L ch
Check
T e st - 4 - 2 3 P r ot e c t O K
Center ch
Check
Surround Back R ch
Check
T e st - 4 - 2 4 P r ot e c t O K
Surround L ch
Check
P r o te ct O K P r ot e c t
If all channels are OK, the characters of " Test - 4 - 35 " are displayed.
T e st - 4 - 3 5
4. Press the STANDBY/ON button.

Turn off
Clear

TX-SR604/604E/8460
OPERATION CHECK-2
SPEAKER PROTECT-2 (CURRENT DETECTION)
[When]
2. Exchange amplifier PC board ass'y (NAAF-8911).
[Procedure]
<Note>
No input.
Do not check two or more channels at the same time.
Do not connect a dummy load to speaker terminal longer than 2 seconds.
Te st - _ Blinks
2. Press the VIDEO 3 button, while " Test - _ " is displayed.

Te st - 4-0 0
3. Repeatedly press TONE + button until " Test-4-35 " is displayed.
Te st - 4-3 5
4. Connect the dummy load of 3 ohms to the Front L ch speaker terminal.

At this time, confirm that the speaker relay is not turned off.
Te st - 4-3 5
5. Connect the dummy load of 1 ohm to the Front L ch speaker terminal.

At this time, confirm that the speaker relay is turned off and" Protect " is displayed.
P ro tect
Disconnect the dummy load immediately after checking the display of " Protect ".
Te st - 4-3 5
6. Check other channels according to the same procedure as 4 and 5.

Turn off
Cle a r

TX-SR604/604E/8460
OPERATION CHECK-3
CONTROL OF POWER SUPPLY (OUTPUT SENSOR AND THERMAL SENSOR)
[When]
2. Exchange power amplifier PC board ass'y (NAAF-8911).
3. Exchange thermal sensor PC board ass'y (NAETC-8913).
[Procedure]
<Note>
No output. No input.
Output sensor
Test - _ Blinks
2. Press the VIDEO 3 button while " Test - _ " is displayed.

T e s t - 4 -0 0
3. Repeatedly press TONE + button until " Test-4-37 " is displayed.
T e s t - 4 -3 7
4. At this time, confirm that the red characters of " FM STEREO " is displayed.
And, check relay RL6901 and RL6902 are turned off in 2 or 3 seconds.
FM STEREO
T e s t - 4 -3 7

Turn off
Clear
Thermal sensor
1. Press and hold down the DISPLAY button, then press the STANDBY button when the unit is power ON.
" V er . 0 . 50/0 51 3 1a " is displayed only for 2 seconds.
<Ex.>
V e r . 0 .5 0 /0 5 1 31 a
2. Press the TONE button while" Ver.0.50/05131a " is displayed.

<Ex.>
T : 2 5 C/ 7 7 F
3. Confirm that the displayed temperature is within +/-20 degree C from the ambient temperatures.
4. Press STANDBY/ON button.

Turn off
Cl e a r

TX-SR604/604E/8460
OPERATION CHECK-4 (1/2)

DSP DEBUG MODE
The operation of DSP is able to checked by the information displayed on FL in this debug mode.
This information will help to pursue the cause of trouble.
To set in DSP debug mode

1. Press and hold down the DISPLAY button, then press the STANDBY button while the unit is power ON.
The version number of microprocessor is displayed only for 2 seconds.
<Ex.>
V e r . 0 .5 0 /0 5 1 31 a
1. Press the TONE+ button within 2 seconds above, the version number of DSP is displayed.
<Ex.>
DSP :0 6 4 21 A
2. Press the DISPLAY button while " DSP :06421A" is displayed. The status of DSP and DIR will be displayed.
<Ex.>
E 1 A 4 8 K 0 N/O FF P o O
To exit
Press STANDBY/ON button.
Content of display
1 2 3 4 5 6 7 8 9 10 11
-------------------------------- DIR ------------------------------------ ------------------ DSP --------------------
1 UNLOCK 4 Sampling Frequency 7 DSP Port
E = UNLOCK and Emphasis 0 = NIC (Normal state)
= LOCK 32K = 32 kHz without Emphasis 1 = DEC
44K = 44.1 kHz without Emphasis 2 = BUSY (Abnormal state)
2 Digital Selector 48K = 48kHz without Emphasis 3 = EXEC WAIT
0 = None
64K = 64 kHz 8 DSP Sequence
1 = OPT 3
2 = OPT 2 88K = 88.2 kHz 04 = Boot
3 = OPT 1 96K = 96 kHz 11 = Restart
4 = COAX 1 176 = 176.4 kHz FF = Free
5 = COAX 2 192 = 192 kHz
32e = 32 kHz with Emphasis 9 DSP Detect Format
6 = HDMI
44e = 44.1 kHz with Emphasis P = PCM (Analog)
7 = FRONT
48e = 48 kHz with Emphasis D = Dolby Digital
d = DTS
3 DIR Status 5 CODEC CLOCK MODE A = AAC
D = Digital N = Normal
? = UNKNOWN
A = Analog U = Up Sampling
M= Multich H = High Sampling (Double Rate) 10 DSP Decode
P = Multich PCM D = Down Sampling o = Decode OK
p = PCM Fixed Q = Quad Rate x = Decode NG
d = DTS Fixed
6 DIR Detect Type
------- Main Micro Processor --------
0 = Analog
1 = PCM 11 Mute
2 = Not PCM 0 = Selector IC(Q5501)
3 = Data 1
4 = DTS CD (Not used) 2 = DSP(Q201)
5 = Multich 3 = DIR(Q301)
6 = Not Decided

TX-SR604/604E/8460
OPERATION CHECK-4(2/2)
DSP DEBUG MODE
Trouble Cause Analysis by Debug Mode

This debug mode will help in digital audio no sound trouble.
Check information on FL display and the related devices or circuits.
Digit no. Symptom on display Cause Check

on FL
1 "E" is displayed No input signal to DIR Related devices from digital input to Q301
4 Displayed freq. is different No input signal to DIR Related devices from digital input to Q301
from input
6 Displayed format is different No input signal to DIR Related devices from digital input to Q301
from input
8 "04" or "11" do not change ROM or RAM error Q281, Q282 & related devices
to "FF"
9 Displayed format is different Input signal to DSP is no good Related devices from Q301 to Q201
from input
10 "x" is displayed Interface between DSP and Related devices from Q701 to Q201
Micro processor is no good
11 This identifies IC which IC outputs error to main Q5501, Q201, Q301 & related devices
outputs error micro processor

TX-SR604/604E/8460
EXPLODED VIEW-1 A061

x 6 pcs.
U21
P901 A097 A044 A102
x 43 pcs. A093 A029
U13 P101
A037 U22
A044 A051
A060
U12
U20
A032 A109
U14 DD,DC Only
A024
A032 Refer to A022
<Fig-1> in
EXPLODED VIEWS-2 A052
U19 A024 P701
x 2 pcs. A053
F6902
F6901 A051
U11 U10
U15 A048
F901 A013 A050 A012
F901C F903C x 4 pcs. A018 x 2 pcs. x 2 pcs.
U17 A011
F903 A030 U18 A047 x 7 pcs. U09
U16 x 4 pcs. A040 U05
A031 A044 A042 A001
A028 A050 A062
F910C A033 A045 A043x 2 pcs.
U04 T901 A041
A045 A047 A055
x 2 pcs. A073
U03
F910 A050
A043 A112
x 2 pcs. x 4 pcs.
A047
A011
A015 x 2 pcs.
TX-SR604/604E/8460
U01
U02
A065
A035 x 4 pcs. A070
A017 A068 A051 A110
x 2 pcs. x 4 pcs. A002 A081
A066 x 5 pcs. A077
x 4 pcs.
A016
A020 A021 U06 A089
x 2 pcs. x 4 pcs. x 3 pcs.

TX-SR604/604E/8460
EXPLODED VIEWS-2
<Fig-1>
Q6050B
x 6 pcs.
A049
x 14 pcs.
Q6056
Q6066
Q6055
Q6065
Q6054
Q6064
Q6053
Q6063
Q6052
Q6062
Q6051
TX-SR604/604E/8460
Q6061 Q6050A
Q6050 x 2 pcs.
Q6060

TX-SR604/604E/8460
A B C D
BLOCK DIAGRAM
AUDIO SECTION FM/AM TUNER UNIT
XM-RADIO 40
XM ANTENNA DD/DC ONLY
UNIT L 59
MAIN R
MAIN L
DAC
SUB R
SUB L
XM/DT IC
1 AK4384
R 60
L 63
37
R 64
36
MIC AMP
SETUP MIC 65
74
25k
66
INVERTING
35
25k
L 61
VIDEO4 IN 73
(FRONT) R
25k
62
INVERTING
L 34
CD
25k
57
R
75
2
25k
L 58
TAPE OUT
30
R
25k
55
L 78
25k
TAPE IN 56
R
33
25k
L 53
VIDEO 3 IN
R 77
25k
54
L 32
VIDEO 2 OUT
25k
51
R
76
25k
L 52
VIDEO 2 IN
31
R
25k
49
L 80
VIDEO 1 OUT
25k
50
3 R
29
25k
L 47
REC R
REC L
VIDEO 1 IN 79
R
25k
48
FL 28
25k
(MULTI CHANNEL INPUT)
45
FR
C 46
SW
DVD
71
38
SL
72
SR 39
SBL 69
SBR
70
4
COAX 1 67
FR
FL
COAX 2
+6dB
+6dB
SL
SW
68
C
VLSC
VLSC
FRONT OPT
OPT 1
LPF
LPF
LPF
LPF
LPF
OPT 2
16
OPT 3
35
28
29
34
33
32
36
30
31
37
15
- 14 2ch ADC
13
OPT OUT -
49
43
SPDIF 42
IN 1 44 8 ch DAC
5 Micro
Controller HDMI
46
45
DIR
RX 48
47
HDMI IN 2 50
HDMI
Q301 CS42518
OUT TX I2S(DVD-AUDIO)

TX-SR604/604E/8460
E F G H
Q5501 R2S15211FP
HEADPHONES
7 CH
POWER
AMPLIFIER
17 SPEAKER TERMINALS
FL
TONE +29dB
16 FRONT LEFT
+
19
FR
+29dB
TONE
20 FRONT RIGHT
+
7
+29dB
CENTER
6
+
14 +29dB
C SURR. LEFT
15 PREOUT
SW
+
+29dB
12 SUB SURR. RIGHT
WOOFER
SL
11
+29dB
SURR. BACK
+
9 SR LEFT
10
SBL +29dB
SURR. BACK
+
RIGHT
4
SBR
5
ZONE2 LEFT
+
2
HP DET
1
SBMUT
ZONE2 RIGHT
CSRL
SBRL
AMUT
Z2RL
FRL
+
ZONE2 LINE OUT

Z2L_PO
L
Z2R_PO
12V TRIGGER
R CONTROL 12V TRIGGER
IR
REMOTE IR IN
SENSOR
Q282 Q281
RI
SBR
SBL
FLASH ROM SD RAM RI

SR
INTERFACE
4M Bit 16M bit
117
116
LPF
LPF
LPF
115 Q201
113 Q701
DSP M30627FHPGP
22
27
21
26
23
29
20
TMS320DA707 MAIN MICOM

62
63
64
120
141
139
135
137
138
1
I2S(DVD-AUDIO)
61
60
54
I2S(DIR/ADC)
<Note>
I2S(DVD-AUDIO) Refer to SCHEMATIC DIAGRAM-11(SD-11) for
Q181 digital audio signal flow and wave forms.
TC74VHCT157FT

TX-SR604/604E/8460
A B C D
BLOCK DIAGRAM
VIDEO SECTION
HDMI INPUT
IN1
IN2 V_Y
COMPONENT
VIDEO INPUT
Y
2 Q4002 AN-15881A
IN1 CB
Y
CR
IN2 CB
CB
CR
IN3 CB Micro Processor

CR DIGITAL VIDEO DECO
OSD
SDET
CR Q4001 ADV71
3 SDET*{OSD+(OSD*SI)} Q4004
1k -6dB AIN1 Y1
1k
1k -6dB
SDET*{OSD+(OSD*SI)}
LC74763 AIN2 COMPOSIT
M-SDET
1k
-9836 1k -6dB
0dB AIN3 COMPOSIT
1k
1k -6dB AIN4 C1
OSDDA
OSDCS
OSDCK
1k
Y AIN5 C2
VDRST
SCL
SDA
COMPOSITE
VIDEO INPUT
0dB
0dB
0dB
DVD
VIDEO1
6dB
VIDEO2
6dB
V
VIDEO3 6dB
4
VIDEO4
(FRONT)
S VIDEO INPUT
C Y
DVD 6dB
6dB
C Y
Y
VIDEO1 6dB
C Y
VIDEO2
C Y
VIDEO3
C Y
VIDEO4
6dB
(FRONT)
6dB
5 C
6dB
Q4002

TX-SR604/604E/8460
E F G H
HDMI BOARD HDMI OUTPUT
Q4002 AN-15881A
CB
CR
COMPONENT
VIDEO OUTPUT
DECODER DIGITAL VIDEO ENCODER
Q4003 ADV7172
Y
ADV7183A 6dB
SDET*{OSD+(OSD*SI)}
DACA Y
DACB CB SDET*{OSD+(OSD*SI)}
CB
DACC CR
SDET*{OSD+(OSD*SI)} 6dB
MPOSITE / Y2
MPOSITE DACD V CR
DACE Y 6dB
DACF C
SCL
COMPOSITE
SDET*{OSD+(OSD*SI)} SDET*{OSD+(OSD*SI)}
VIDEO OUTPUT
6dB OSD*(SDET + SI)
MONITOR
SDET*OSD
SELV1
VIDEO1
SELV2
VIDEO2
SDET*{OSD+(OSD*SI)} SDET*{OSD+(OSD*SI)}
S VIDEO
6dB SDET*OSD
SDET*OSD
OUTPUT
SDET*{OSD+(OSD*SI)} SDET*{OSD+(OSD*SI)} C Y
6dB SDET
MONITOR
SELV1
SELV1 C Y
VIDEO1
SELV2
SELV2 C Y
VIDEO2
4002 AN-15881A

TX-SR604/604E/8460
A B C D
SCHEMATIC DIAGRAM-1(SD-1)
AUDIO SECTION
NAAF-8911 (1/2)
TO NADG-8816 TO NADG-8816
1 U15 AMPLIFIER PC BOARD TO XM (SD-6:A3)
P303
(SD-6:A2)
TO NADG-8816 TO NADG-8817 P302
(SD-6:A3) (SD-7:H1)
10
11
12
13
14
10
11
12
13
14
1
2
3
4
5
6
8
9
7
1
2
3
4
5
6
7
8
9
P304 JL5502A
TUPACKR
TUPACKL
DACSBR
PROTECT
DACSBL
GNDTU
DACSR
VLDATA
ADRT+
DACSL
GNDv4
ADLT+
DACSW
GNDDG
1
2
3
SEC1H
VLCLK
XM_L 1
XM_R 2
3
4
5
+12V 6
-12V 7
GNDA
AMUT
DACR
DACC
VOLH
DACL
+12V
V4R
MIC
V4L
-12V
P5505
RI
GND_AMP
R5500
RI 330
P7900
R5575
47/50 C5574
47/50 C5571
47/50 C5570
47/50 C5573
47/50 C5572
47/50 C5575
220K
R5576
R5581
C5576
220K
220K
C5569
47/50
R5577
R5580
220K
47K
P7902
R5578
47/50
C5701 47K
R5503 102J
R5582
220K
330
R R5543 C5503
R5579
220K
221K
CD 220K
C5504
R5583
R5504 221K
220K
L SW_OUT1
330 R5544
2 R5505
220K C
4
R 330 R5545
220K
TAPE OUT R5546
R5506 220K
L 330
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
R5547
FLIN1
CIN1
SWIN1
SLIN1
FRIN1
SBRIN1 SRIN1
SBLIN1
INLB/RECL2 INL11/RECL5
RECL3
INRB/RECR2 INR11/RECR5
RECR3
R5507 220K
C5551
R 330 C5507
64
INL9 1-C
1
S
221J 63
INR9 1-OUT
2 47/25
TAPE C5508
62
61
INLA/RECL1 AGND
3
4 C5552 S
R5508 221J INRA/RECR1 2-OUT
L 47/25
INL10/RECL4
INR10/RECR4
60 5
330 R5548 INL8 2-C
220K 59 6 C5553
C5702 INR8 3-C
C
102J 58 7 47/25
P7903
R5549 INL7 3-OUT

R5509 220K 57 8
INR7 AGND
R 330 C5509
56
55
INL6 4-OUT
9
10
C5554
47/25
VIDEO3 221J
54
INR6
INL5
4-C
5-C
11 C5555
C5510 53 Q5501 12 47/25 S
R5510 221J INR5 5-OUT
L 330 R5550
52
INL4
R2S15211FP AGND
13
S
220K 51 14 47/25
INR4 6-OUT
50 15 C5556
49
INL3 (Botom view) 6-C
16 C5557
R5511 INR3 FLC
R 48 17 47/25
BASS_R2
BASS_R1
330 R5551 INL2 FLOUT
220K 47 18
VIDEO2_OUT R5552
46
INR2
INL1
AGND
FROUT
19
R5512 45 20 C5558 47/25
220K INR1 FRC
L 330
44
AVEE BASS_L1
21 C5559 474J
43 22 C5560 823J R5585
C5703 CLOCK BASS_L2
3 102J 42 23 C5561 1.8K

P7904
R5553 DATA DGND TRE_L

223J 2SC1815
SBRIN2
41 24
SBLIN2
R5513 220K
TRE_R
SWIN2
MONO
SRIN2
AVCC
FRIN2
ADCR
SUBR
SLIN2
R
FLIN2
ADCL
SUBL
Q5684
CIN2
330 C5513 R5674 +12V
R5588 10K
R5587 10K
VIDEO2 221J
40
39
38
37
36
47/25 35
C5565 34
33
32
31
30
29
28
27
823J 26
25
7.5V 68
470/16
C5674
C5514
C5563
C5562
474J
R5514 221J
C5566
L R5684
MTZJ7.5C MTZJ7.5C
47/25
220/25
223J C5564
C5684
330 R5554
D5672
220K 680
1.8K
R5515
R R5555
R5586
330
C5685
220/25
D5671
220K
VIDEO1_OUT R5556
C5675
470/16
R5516 220K
L 330 R5685
R5589
-7.5V 680 -12V
1K
R5557
R5517 220K Q5685 R5675
R 330 C5517 Q5503
2SA1015 68
221J R5667
VIDEO1 NE5532
4
R5518 C5518 3 22
221J
L 330 R5558
DMIXR 1 R5591
220K 2 10K DAC_FR
C5704 R5590 10K R5592 R5593
102J
C5590 470 1.2K
220/25 220/25
C5666 C5667
330J
DAC_SW
R5594 10K
R5595 10K
P7905
R5559 C5591
R5519 220K
FR 330J R5596 R5597
330 C5519
4 R5520
221K
C5520
221K DMIXL
R5598 10K
7
5
470 1.2K
R5599
FL 6 DAC_FL
330 R5560 Downmix
220K 10K R5666 +12V
8
R5561 Q5503 NE5532 22

R5521 220K
SR C5521
330
DVD MULTI IN
221J
C5522
R5522 221J
SL 330 R5562
220K C5705
P7906
R5563 102J
R5523 220K
SW 330 C5523
221J
C5524
R5524 221K
C 330 R5564
220K
R5565
R5525 220K
SBR 330 C5525
221J
C5526
R5526 221J
SBL 330 R5566
220K
C5706
102J
<Note>
SD-x:XY is short for Shcematic Diagram-x and
each socket's location, X=A to H, Y=1 to 5.

TX-SR604/604E/8460
E F G H
TO NADG-8816 (SD-6:A2)
P301
1
2
3
4
5
6
SBZ2MUT
Z2EMUT
GND_IR
+5.6IR
TZ2
IR
TO MAIN AMP
(SD-2:A3)
VOLH
SEC1H
PROTECT
R5680 220K
R5681 220K
R5682 220K
R5813
R6227
0
R5630 P6221
Q5630A R6221
R6226
4
220 3 3.3 Q6226
C6226
NE5532 R5620
100K
IR IN
104Z
2SB1068-U
SW_OUT C5600 R5610 RN1441 100 100
15K C5631
R5632 221J
C5630 1 D6221 D6222

R5631
2
47K
47/50 270 Q5600

R5600
47/50 +12VTRG
R5634
3.3K
R5633
220K 220K
C6222 R6224
R6228
10K
R6223
R6222
10K 12V TRIG
1.2K
GND_TRG 1SS352 1SS352
PC817X 10K
Q5610
1K
C5632 103J C6221
OUT ZONE2
R5601
Q5601 RN1441
100/25
Q5630B RN1441 223K
+
5 NE5532
Q6221
7
6 SBR_OUT C5601 R5611 2.2k R5621
0 Q6227
SBL_OUT 47/50 R5612 RN1402
C6229
103Z
8
C5602 2.2K R5622 Q6223 Q6222 GND_E

R5603 R5602
SBR_OUT 47/50 0 RN1402 RN1402

220K 220K
SBL_OUT Q5602 RN1441

Q5603 RN1441 P6991
C_OUT C5603
SR_OUT 47/50 R5613 2.2K R5623
SL_OUT R5614 0
C5604 R5624
R5604
2.2K
47/50 0
SR_OUT
220K 220K
Q5604 RN1441
SL_OUT
Q5605 RN1441
R5605
L_OUT C5605
L_OUT 47/50 R5615 2.2K R5625
R_OUT R_OUT R5616 0
R5626
R5606
C5606 2.2K
47/50 0
220K 220K
R5527
Q5606
Q5607
RN1441
R
R5607
Q5670 R5567 330

78M12
3 O C5607 RN1441
2.2k
ZONE2 LINE OUT
I 1 C_OUT 47/50 R5627
R5568 R5528
G
R5617 2.2K 2.2k

L
2
0 330
Z2_R R5618
C5670
C5672
220/25
R5608
C5608 2.2K
10/50
47/50 RN1441
P7907
220K 220K
Q5608
C5671
220/25
C5673
10/50
Q5609
R5609
D5717
RN1441
D5707
Z2_L R5619 C5707

G 1
C5609 2.2K 221J

3 O I 2 47/50 PRE OUT
Q5671 R5531
100
SW
79M12
R5571
22K
P7908
D5718
D5708
C5708
221J
SBR 13
12
TO NAAF-8917
SBL 11
(SD-3:A1)
10
(SD-2:B5) TO MAIN AMP
P5504B
SR 9
8.2(2W)
+12V
R5677
8.2(2W)
R5678
8
(SD-2:A3)
SL 7
GND_S1 6
+22V R 5
470/35 C9003 1000/35
4
R5660 L 3
RL1N4003 x4 2.2(1W) 2
R5672 +22V S1L+
C 1
P5503B
C9001
47(2W) D9002 D9001

334J
FROM AMP
R5670 47(2W) GND_AMP

C9004
D9004 D9003
R5673 -22V
R5661 S1L-
68(2W)
2.2(1W)
R5671
68(2W)
NOTE
THE COMPONENTS IDENTIFIED BY MARK ! ARE CRITICAL FOR SAFETY
REPLACE ONLY WITH PART NUMBER SPECIFIED.
VOLTAGE (MEASURED WITH VOLTMETER) IS DC VOLTAGE.(NO INPUT SIGNAL).
ALL PNP TRANSISTORS ARE EQUIVALENT TO 2SA1015-GR UNLESS OTHERWISE NOTED.
ALL NPN TRANSISTORS ARE EQUIVALENT TO 2SC1815-GR UNLESS OTHERWISE NOTED.
ALL DIODES ARE EQUIVALENT TO 1SS133 UNLESS OTHERWISE NOTED.
ELECTROLYTIC CAPACITORS ( ) ARE IN uF/WV.
ALL CAPACITORS ARE IN pF/50WV UNLESS OTHERWISE NOTED.
EX) 030- 3pF 330- 33pF 331- 330pF 333- 0.033uF
ALL RESISTORS ARE IN OHMS 1/4WATTS UNLESS OTHERWISE NOTED.
THE THICK LINES ON PC BOARD ARE THE PRINTING SIDE OF THE PARTS.
EX) PRINTING SIDE
CIRCUIT IS SUBJECT TO CHANGE FOR IMPROVEMENT.

TX-SR604/604E/8460
A B C D
POWER AMP SECTION-1
NAAF-8911 (2/2)
U15
1 AMPLIFIER PC BOARD Center ch
+B1C
+BC 1.1V
Q6030
2SC5171 or
54.5V
R6010 R6000 R6030

R6020
470
2SC5993
2.2(1/4W) Q605
R6080 LIST
2SC1740S-S
P6000B
1.0V
0.6V
3.9K 5.6K
Q6000
0.22 R614
(1/4W)
POWER TRANSISTOR LIST
T0 NAAF-8917
NAETC-8913 22K
Q6380
(SD-3:B3)
5 -0.3V
U17 LM61CIZ TYPE Q6050-56 Q6060-66 NF 4 NFC
1 G V 3 -B1
82 (1/4W)
3
2 O
R6100
THERMAL +B1 2
2SC1740S-S
D,W,G,PA MN130S 2 ID+ 0.22(5
MP130S +B 1
R6070
SENSOR 1 ID-
C6040 +
-B
P6080
3 THERMAL
47/50
1 GNDDG2
PC BOARD PP 2SC5242 2SA1962
2 +5VDIS
R6040 -0.4V R6090 Q606
2K -0.6V LIST
JL6402A 0.22
Q6010
R61
R6050
(1/4W)
3.3K
47K
T0 NADG-8816 D600
-BC
(SD-6:A2) -1.1V Q6040
KDS4
NOTE 2SA1930 or
2SA2140
THE COMPONENTS IDENTIFIED BY MARK ! ARE CRITICAL FOR SAFETY -B1C
-54.5V
VOLTAGE (MEASURED WITH VOLTMETER) IS DC VOLTAGE.(NO INPUT SIGNAL). +B1L 54.5V
2 ALL PNP TRANSISTORS ARE EQUIVALENT TO 2SA1015-GR UNLESS OTHERWISE NOTED. Front L ch +BL 1.1V
Q6031
2SC5171 or
R6011 R6001 R6031

ALL NPN TRANSISTORS ARE EQUIVALENT TO 2SC1815-GR UNLESS OTHERWISE NOTED. R6021
3.9K 5.6K 470

2.2 (1/4W) 2SC5993 Q605
ALL DIODES ARE EQUIVALENT TO 1SS133 UNLESS OTHERWISE NOTED. 1.0V R6081 LIST
P6001B
2SC1740S-S
ELECTROLYTIC CAPACITORS ( ) ARE IN uF/WV. 0.6V R614
0.22 22K
ALL CAPACITORS ARE IN pF/50WV UNLESS OTHERWISE NOTED. (1/4W)
Q6001
T0 NAAF-8917
EX) 030- 3pF 330- 33pF 331- 330pF 333- 0.033uF
(SD-3:B4)
5 -0.3V
NF R6101
ALL RESISTORS ARE IN OHMS 1/4WATTS UNLESS OTHERWISE NOTED. -B1 4 NFL
82 (1/4W)
+B1 3 0.22(5
2
2SC1740S-S
+B 2 ID+
R6071
1
1 ID-
C6041 +
EX) PRINTING SIDE -B
P6081
47/50
R6041 -0.4V R6091 Q606
2K -0.6V LIST
0.22
R61
FROM AUDIO SECTION
Q6011
(1/4W)
R6051
VOLH
3.3K
(SD-1:G1 & F4)
SEC1H 47K
GND_S1 D600
-BL
+22V Q6041 KDS4
PROTECT -1.1V
2SA1930 or
2SA2140
-B1L
-54.5V
R6702
+B1R 54.5V
10K
R6708
C6703
104Z
33K
Front R ch +BR 1.1V

Q6032
2SC5171 or
R6701
R6012 R6002 R6032

3 R6022
5.6K 470
2SC2712-GR 2SC5993 Q6052
22K Q6703 2.2(1/4W) LIST
2SA1163-BL 2SC2712-GR R6082
P6002B
2SC1740S-S
1.0V
Q6702 Q6701 0.6V
0.22
R6142
R6704
(1/4W)
Q6002
47K
KDS4148U
T0 NAAF-8917
KDS4148U
22K
D6701
3.9K
D6702
(SD-3:B5)
5 -0.3V
NF
4 NFR
-B1
82 (1/4W)
+B1 3 R6102
2
2SC1740S-S
2 ID+ 0.22(5
R6072
+B 1
1 ID-
C6042 +
-B
UDZS5.1B
P6082
C6701
100/25
47/50
R6706
C6704
220K
D6703
+
+
1/50
R6092 Q606
R6042 -0.4V LIST
2K -0.6V
0.22
Q6012
(1/4W) R61
R6052
3.3K
47K
-BR D600
Q6042 KDS4
-1.1V
2SA1930 or
2SA2140
UDZS5.1B
-B1R
-54.5V
5.6K
12K
C6706
D6704
R6709
R6710
10/50
+
4
R6197
100 (1W)
R6903
47K
P6903B R6902 P6901A

1K
Q6707 GND_AMP
2SC2712-GR +54.5V
C6901
S1H+ 4 1
LIST
+
NAPS-8912
334J/100V
RL6901
C6912
U16 3 2
SEC. TERMINAL-2 PC BOARD D6901
P6900B
P6011A (COPPER BUS PLATE)

334J/100V
1SS352
D6902
C6911
102J
3 2
C6913
P15-P19 : Power Trans S1 terminal

JL6952A
JL6952B
GND_SPSBR
GND_SPSBL
P19
GND_SPSR
P6904B(GRN)
GND_SPSL
S1H- 4 1
GND_SPC
GND_SPR
GND_SPL
D10XB60H
GND_S1
RL6902 TO NAVD-8819
+22V
C6902
+
LIST
P18
P6904B F6901
1 1 S1L+ D10XB60H (SD-5:G1)
2 2
C6915
12A 250V JL6603A

P17
P6900B(BLK) 3 3
104J
-54.5V
9
8
7
6
5
4
3
2
1
4 4
D6903
P16
C6916
P6902A
104J
R6136
R6134
C6035
R6132
C6033
C6031
P6903B(YEW)
P15
C6030 R6130
F6902
5 12A 250V
S1L-
CAPACITOR RATING R6130-6136
8.2(1W) TO
C6036
R6131
R6133
R6135
C6034
C6032
MODEL C6901,C6902 C6030-6036

473J(50V)
FROM AUDIO SECTION D 10000uF/63V
(SD-1:F4) P, W, G 10000uF/69V
<Note>

TX-SR604/604E/8460
E F G H
CLIMP AS P6901B P6910A P6910C P6910E P6910B P6910D P6910F PVC ASSY
from C6901/6902 P6902B from C6901/6902
to Power Amp of all ch to Power Amp of Front ch
5V -B +B +B1SL 54.5V
Surround L ch +BSL 1.1V
Q6033
2SC5171 or
R6013 R6003 R6033

IPRO P6902C R6023 2SC5993 IPRO
3.9K 5.6K 470

Q6053
R6163
Q6050 2.2(1/4W)
R6160
P6901C
LIST
33K
33K
LIST R6083
P6003B
1.0V
2SC1740S-S
CLIMP AS 0.6V
0.22
R6140 from C6901/6902 (1/4W) R6143
Q6070
T0 NAAF-8917
Q6003
to Power Amp Q6073
R6153
R6193 C6053
22K
R6150
22K
D6010 R6190 C6050
2SC2240
220K 103J
2SC2240
KDS4148U 220K 103J
12K
(SD-3:D2)
12K
of Surr ch 5 -0.3V
NF
SPC -B1 4 NFSL SPSL
100 (1/4W)
R6100 +B1 3 R6103
2 0.22(5W)
2SC1740S-S
0.22(5W) 2 ID+
R6073
+B 1
1 ID-
C6043 +
-B
P6083
47/50
KDS4148U
D6013
Q6060 R6043 -0.4V R6093 Q6063
LIST 2K -0.6V LIST
0.22
R6170 R6173
Q6013
VPRO (1/4W) VPRO
R6053
3.3K
47K R6180 VOLH 47K R6183 VOLH
D6000 47K -BSL D6003 47K
KDS4148U Q6043 KDS4148U
-1.1V 2SA1930 or
2SA2140
-B1SL
-54.5V
5V +B1SR 54.5V
Surround R ch +BSR 1.1V
Q6034
2SC5171 or
R6014 R6004 R6034

IPRO R6024 2SC5993 IPRO
3.9K 5.6K 470

Q6051 2.2(1/4W) Q6054
R6161
R6164
33K
LIST LIST
33K
R6084
P6004B
1.0V
2SC1740S-S
R6141 0.6V
22K 0.22
(1/4W) R6144
Q6004
Q6071 Q6074
T0 NAAF-8917
R6151
D6011 R6191 C6051
22K
R6194 C6054
R6154
2SC2240 2SC2240
12K
KDS4148U 220K 103J
220K 103J
12K
(SD-3:D3)
NF 5 -0.3V
R6101 SPL 4 NFSR SPSR
-B1
100 (1/4W)
0.22(5W) +B1 3 R6104
2
2SC1740S-S
2 ID+
R6074
+B 1 0.22(5W)
1 ID-
C6044 +
-B
P6084
47/50
KDS4148U
D6014
Q6061 R6044 R6094 Q6064
LIST -0.4V LIST
2K -0.6V
0.22
Q6014
R6171 R6174
R6054
VPRO (1/4W) VPRO

3.3K

D6001 47K -BSR D6004 47K
KDS4148U Q6044 KDS4148U
-1.1V
2SA1930 or
2SA2140
-B1SR
-54.5V
5V +B1SBL 54.5V
Surround Back L ch +BSBL 1.1V
Q6035
2SC5171 or
R6015 R6005 R6035
IPRO R6025 2SC5993 IPRO

3.9K 5.6K 470
Q6052 Q6055
2.2 (1/4W)
R6162
R6165
LIST
33K
LIST
33K
R6085
P6005B
1.0V
2SC1740S-S
0.6V
0.22 R6145
R6142 (1/4W) Q6075
Q6005
Q6072
T0 NAAF-8917
R6152
R6192 C6052
22K
R6155
22K
R6195 C6055
2SC2240 2SC2240
220K 103J
12K
220K 103J
12K
(SD-3:D4)
NF 5 -0.3V
SPR 4 NFSBL SPSBL
-B1 P6085
100 (1/4W)
R6102 +B1 3 R6105

2
2SC1740S-S
R6075
0.22(5W) +B 2 ID+ 0.22(5W)

1
1 ID-
C6045 +
-B
47/50
KDS4148U
D6012
KDS4148U
D6015
R6095
Q6062 0.22
R6045 -0.4V (1/4W) Q6065
LIST 2K -0.6V LIST
R6172
Q6015
VPRO R6175
R6055
VPRO
3.3K

D6002 47K -BSBL D6005 47K
KDS4148U KDS4148U
-1.1V Q6045
2SA1930 or
2SA2140
-B1SBL
-54.5V
+B1SBR 54.5V
Surround Back R ch +BSBR 1.1V
Q6036
2SC5171 or
R6016 R6006 R6036
R6026 2SC5993 IPRO

3.9K 5.6K 470
R6166
2.2(1/4W) Q6056
33K
R6086 LIST
P6006B
1.0V
2SC1740S-S
0.6V
0.22
(1/4W) R6146
Q6076
Q6006
T0 NAAF-8917
22K
R6196 C6056
R6156
2SC2240
103J
12K
(SD-3:D4)
5 -0.3V
NF 4 NFSBR SPSBR
-B1
100 (1/4W)
+B1 3 R6106
2
220K
0.22(5W)
2SC1740S-S
2 ID+
R6076
+B 1
1 ID-
C6046 +
-B
P6086
47/50
KDS4148U
D6016
R6046 -0.4V R6096 Q6066

2K -0.6V LIST
0.22
Q6016
(1/4W) R6176 VPRO

R6056
3.3K
47K R6186 VOLH

-BSBR D6006 47K
Q6046 KDS4148U
-1.1V
2SA1930 or
2SA2140
-B1SBR
-54.5V
VOLH
IPRO
VPRO
TO NAVD-8819 (SD-5:A3)
JL6600A
1 SPC
2 SPL
3 SPR
4 SPSL
5 SPSR
6 SPSBL
7 SPSBR

TX-SR604/604E/8460
A B C D
POWER AMP SECTION-2 NOTE
1 ALL DIODES ARE EQUIVALENT TO 1SS133 UNLESS OTHERWISE NOTED.
NAAF-8917 EX) 030- 3pF 330- 33pF 331- 330pF 333- 0.033uF
U19 THE THICK LINES ON PC BOARD ARE THE PRINTING SIDE OF THE PARTS.
DRIVER AMPLIFIER PC BOARD EX) PRINTING SIDE
TO NAAF-8911 (SD-1:G4)
P5503A P5504A
11
1
2
3
4
10
12
6
13
5
7
9
P6011B COPPER BUS PLATE
+53.8V 10 (1/4W)
Surround L ch
R5163
040D 2SA949Y (1/4W)

2SC2240-BL R5113
R5183
Q5033 100
1K
P5019
+52.3V
R5093
TO NAAF-8911 (SD-2:F1)
100K
2SC2240-BL
Q5013
C5103
22/100
+
Q5003
1.1V
C5083
R5033
120K
R5003 C5013 R5023 0V NFSL 5
+
2 -B1SL 4
R5043 R5013
1K
220/25
R5203
47/50 330 -0.65V R5233
C5053
C5003
22K
56K
C5043
47/50
+B1SL 3
221K
120K
+
+
R5053 +BSL 2
4.7K -BSL 1
2.2K
P6003A
R5133
2SC2240-BL
Q5053
101K
2SC2229-Y C5093
22K
22/100
C5113
-48.2V
+
R5083 R5063
1.2K
C5023 10/50
-1.1V
100 Q5043
MTZJ5.6B
R5103
-52.9V
D5003
100K
R5173
(1/4W)
+
470
R5193
-53.8V 10 (1/4W)
+53.8V 10 (1/4W) +53.8V

Center ch Surround R ch
040D 2SA949Y (1/4W)
Q5034 (1/4W)
R5164
R5160
2SC2240-BL R5110
2SC2240-BL R5114
R5180 R5184
100
Q5030 100
1K
1K
10 (1/4W)
+52.3V
R5090
2SA949Y
R5094
+52.3V
100K
100K
2SC2240-BL
2SC2240-BL
TO NAAF-8911 (SD-2:D1)
22/100
Q5010
Q5014
C5104
C5100
22/100
Q5004
+
+
Q5000
1.1V 1.1V
C5080
C5084
R5030 R5034
040D
120K 120K
R5000 C5010
+ R5020 0V NFC 5 R5004 C5014
+
R5024 0V NFSR 5
4 4
R5040 R5010
-B1C -B1SR
R5014
220/25
47/50 330 -0.65V 1K 330 -0.65V R5234
C5050
47/50
220/25
R5230
C5054
1K
56K
C5000
C5004
R5204
47/50
C5044
56K
C5040
47/50
+B1C 3 3
221K
120K +B1SR
22K
221K
120K
R5200
18K
+
R5054
+
+
R5050 +BC 2 +BSR 2
4.7K -BC 1 4.7K -BSR 1
3
R5044
2.2K
2.2K
P6004A
P6000A
2SC2240-BL
R5134
2SC2240-BL
R5130
2SC2229-Y C5094
Q5054
2SC2229-Y C5090
101K
101K
18K
22K
22/100
C5110
Q5050
22/100
C5114
-48.2V -48.2V
+
+
R5080 R5060
R5084 R5064
1.2K
-1.1V -1.1V
1.2K
C5020 10/50
C5024 10/50
(1/4W) Q5044
(1/4W) Q5040
MTZJ5.6B
MTZJ5.6B
-52.9V -52.9V
D5000
D5004
R5104
100K
R5100
+
+
100K
R5170
R5174
100
470
100
470
10 (1/4W) 10 (1/4W)
-53.8V R5190 -53.8V R5194
+53.8V 10 (1/4W) +53.8V 10 (1/4W)

Front L ch Surround Back
R5165
R5161
2SC2240-BL R5111
040D 2SA949Y (1/4W)

Q5031 100
2SC2240-BL R5115
040D Q5035 (1/4W)

R5181 R5185
100
1K
L ch
1K
R5095
R5091
+52.3V +52.3V
100K
2SA949Y
100K
2SC2240-BL
2SC2240-BL
Q5011
Q5015
C5101
22/100
22/100
C5105
Q5005
+
+
Q5001
1.1V C5085 1.1V

C5081
R5031 R5035
120K 120K
R5001 C5011 R5021 0V NFL 5 R5005 C5015 R5025 0V NFSBL 5
+ +
R5041 R5011
-B1L 4 1K -B1SBL 4
R5045 R5015
1K 330 R5231 -0.65V

220/25
-0.65V
C5001
47/50 47/50 330 R5235

220/25
C5055
C5005
56K
56K
C5051
C5045
C5041
22K
R5205
47/50
120K 3 +B1SBL 3
47/50
221K
221K
+B1L 120K
18K
R5201
+
R5055
+
R5051 +BL 2 +BSBL 2

4.7K -BL 1 4.7K -BSBL 1
2.2K
P6005A
2.2K
P6001A
R5131
R5135
2SC2240-BL
2SC2240-BL
2SC2229-Y C5091
Q5055
2SC2229-Y C5095
101K
22K
101K
Q5051
18K
22/100
22/100
C5111
C5115
-48.2V -48.2V
+
4
(1/4W) Q5041
100 Q5045
R5081 R5061
R5085 R5065
1.2K
-1.1V
1.2K
C5025 10/50
-1.1V
C5021 10/50
MTZJ5.6B
MTZJ5.6B
-52.9V -52.9V
R5101
D5001
100K
R5105
D5005
100K
+
(1/4W)
R5175
R5171
470
470
100
10 (1/4W) 10 (1/4W)
-53.8V R5191 -53.8V R5195
+53.8V 10 (1/4W) +53.8V 10 (1/4W)

Front R ch Surround Back
R5166
R5162
(1/4W)
Q5036 (1/4W)
2SC2240-BL R5116
2SC2240-BL R5112
R5182 R5186
100
Q5032 100
1K
1K
R ch
+52.3V +52.3V
R5096
R5092
2SA949Y
2SA949Y
100K
100K
2SC2240-BL
2SC2240-BL
Q5012
Q5016
22/100
C5102
22/100
C5106
Q5002
+
Q5006
1.1V 1.1V
C5086
C5082
R5032 R5036
040D
040D
120K 120K
R5002 C5012 R5022 0V NFR 5 R5006 C5016 R5026 0V NFSBR 5
+ +
-B1SBR 4
R5042 R5012
1K R5232 -B1R 4 1K
R5046 R5016
47/50 330 -0.65V 330 -0.65V R5236

220/25
220/25
C5052
C5056
47/50
56K
C5006
56K
C5002
C5046
47/50
C5042
18K
+B1R 3 +B1SBR 3
22K
221K
120K 120K
R5206
47/50
221K
R5202
R5056
+
R5052 +BR 2 +BSBR 2

4.7K -BR 1 4.7K -BSBR 1
2.2K
P6006A
P6002A
2.2K
2SC2240-BL
2SC2240-BL
R5132
R5136
2SC2229-Y C5096
Q5052
2SC2229-Y C5092
1.2K Q5056
101K
18K
101K
22K
22/100
22/100
C5112
-48.2V -48.2V
C5116
+
+
R5086 R5066
C5022 10/50
1.2K
R5082 R5062
-1.1V
100 Q5046
100 Q5042
C5026 10/50
-1.1V
MTZJ5.6B
MTZJ5.6B
R5102
-52.9V -52.9V
R5106
D5002
100K
D5006
100K
(1/4W)
+
+
R5172
(1/4W)
R5176
5
470
470
10 (1/4W) 10 (1/4W)
-53.8V R5192 -53.8V R5196
<Note>

TX-SR604/604E/8460
A B C D
VIDEO SECTION
NAVD-8819 (1/2)
1 U14 VIDEO PC BOARD
P4001
PROUT2
GND_VD
PBIN3
C4133 PROUT
PBIN2
C4001
GND_VD
PRIN3
PR
R4001
10/50
75
PRIN1
PRIN3
PRIN2
220/6.3
33
R4136
C4002 PBIN3 C
COMPONENT PB C4135
R4002
75
10/50
VIDEO IN3
C4134
104Z C
R4133
35 220/6.3
C4003 CYIN3 C
Y 75 C
R4003
10/50 R4135 C
75
40
39
38
37
36
34
33
32
31
30
29
28
27
26
25
75
O2
O1
MUTE
PR6
PR5
PR4
PR3
PR2
PR1
PB6
PB5
PB4
PB3
BP2
PROUT1
PROUT2
R4134
C4019
75
P4001 102K
PBOUT2 C4103 220/6.3 41 24
PBOUT2 PB1
C4004 PRIN2 PBOUT C4104 42 23
PBOUT1 CY6
PR 220/6.3 C4154 43 22
R4004
10/50 GND2 CY5

75
C4105 221J 44 21
CYOUT3-FB CY4
2 COMPONENT PB
C4005 PBIN2
CYOUT2
CYOUT
+5V_VDD C4122
104Z
22/50
C4107
C4106
220/6.3
22/50 C4108
45
46
47
CYOUT3
CYOUT2-FB
CY3
CY2
20
19
18
R4005
CYOUT2 CY1
10/50
L4010
220/6.3 C4155 48
75
17
VIDEO IN2 221J 49
COUT4 BIAS
16
VCC2 C8
C4006 CYIN2 47/25 50 15
COUT3 C7
Y C4123 C4111 51
Q4002 14
R4006
10/50 COUT2 C6
75
C4112 104Z 52 13
COUT1 GND1
104Z 53 12
+5V 54
GND3 AN-15881A-VT C5
11
YOUT4-FB C4
C4114 55 10
P4002
470/6.3 56
YOUT4 VIDEO SW C3
9
YOUT3-FB C2
C4007 PRIN1 C4116 57 8
YOUT3 C1
PR 470/6.3 58 7
R4007
10/50 YOUT2-FB VCC1

75
C4118 59 6
YOUT2 Y8
C4124 470/6.3 60 5
47/25 YOUT1 Y7
C4008 PBIN1 C4119 61 4
VCC3 Y6
COMPONENT PB 220/6.3 62 3
R4008
10/50 C4125 VOUT4-FB Y5

75
C4121 63 2
VIDEO IN1
TX-SR604 ONLY
104Z VOUT4 Y4
+5V
470/6.3 64 1
VOUT3-FB
VOUT2-FB
SDA Y3
VOUT3
VOUT2
VOUT1
C4009 CYIN1
Y
SCL
R4009
C4168 220J
10/50
V1
V2
V3
V4
V5
V6
V7
V8
Y1
Y2
75
65
66
67
68
69
470/6.3 C4130 70
220/6.3 71
72
73
74
75
76
77
C4132 78
10/50 79
80
C4013
102K
TX-SR574 ONLY
P4002
RN1443
Q4019
470/6.3
C4167
C4129
C4127
C4131
104Z
R4201 PROUT
220J
PR
R4204
100K
C4158 75
470
3
RN72K2E-022JE
L4001
SDA
R4202
COUT_MON
PBOUT
YOUT_MON
VOUT_MON
COMPONENT PB
C4109
OSDOUT_1
YIN_DVD
104Z
R4205
COUT_V2
COUT_V1
YOUT_V2
YOUT_V1
100K
C4159 75
YIN_V1
VIN_V1
VIN_V4
VIN_V2
VIN_V3
VIN_DAC
VIN_DVD
VOUT_V2
VOUT_V1
VIDEO OUT 470
COUT
YOUT
VOUT
R4203 CYOUT
Y
R4206
C4160 75
100K
470
+5V_VDD
OSDOUT_1
+5V_VD +5V_
COUT
VOUT
YOUT
10(1/2W)
C4010 CIN_V3
R9009
080D
080D
104Z
P4003 C Y 104Z R4
C4011 YIN_V3 LBC2518 AGND 1
10/50 BA18BC0FP L4004
C4039
C4040
C4036
C4038
VIDEO 3 IN
103K
C4012 VIN_V3
Q4006 220K LBC2518 022K
R4011
R4010
L4002
R4012
10/50 1 3 +1.8V
I O
75
823J
75
R4057 C4034
75
R4055 4.7k
28.6363MHz
2
R4056
470/6.3
C4028
C4030
C4031
C4032
33 R4054
R4013 COUT_V2
680
103Z
104Z
104Z
103J
X4003
C Y
102K
R4014 75
28 FCX-03
1K
YOUT_V2
R4208 C4217
100K 181J
R4015 75
VIDEO 2 OUT 75 VOUT_V2
C4029
C4156
C4219
C4218
R4207
R4209
100K
181J
40
39
38
37
36
35
34
33
32
31
30
29
27
26
25
24
23
22
21
100K
181J
P0
P1
P2
P3
P4
P5
AGND
AGND
LLC1
LLC2
LEPF
NC
NC
DGND
XTAL
XTAL1
NC
PVDD
^PWRDN
DVDD
3.9K
102K R4033 R4034
2.2(1/2W)
41 P6 20
C4014 C4016 CIN_V2 AIN7
R9007
1K C4033 42 AIN1 P7 19
P4004 C Y 104Z R4035 104Z R4036
4 VIDEO 2 IN
C4017 YIN_V2
10/50
1K 104Z 1K
R4037 C4035 R4038
43
44
45
AIN8
AIN2
AIN9
NC
NC
NC
18
17
16
C4018 VIN_V2
1K 1K 46 AIN3 DVDDIO 15 C406
R4017
R4018
R4016 10/50 C4037 104Z 47 AGND DGND 14 104Z

75
C4047
75
75
104Z
BA33BC0FP LBC2518 C4050 C4049 C4048 48 CAPY1 NC 13

R4019 COUT_V1 Q4007 L4003 10/16 102J 49 CAPY2 SFL 12 R4053
C Y R4020 75 1 3 022K +3.3V 104Z 50 AVDD Q4001 INTRQ 11 33
YOUT_V1 I O
G
C4041
C4053 C4051 C4064

C4045
51 REFOUT DVDD 10
C4043
10/16
ADV7183B
103K
104Z
R4021
2
75 104Z
VIDEO 1 OUT
104Z
75 C4054 C4052 52 CML DGND 9

VOUT_V1 104Z 53 AGND VIDEO DECODER P8 8
C4163
C4161
C4162
R4210
R4212
R4211
101J
101J
100K
101J
10/16 102K
100K
C4157
10/16 54 CAPC1 P9 7
104Z
470/6.3
100K
C4044
C4042
102K
C4046
C4057 104Z CAPC2 P10

104Z
55 6
10/16
C4015 C4056 C4055 56 AGND P11 5
R4039 R4040 57 AIN10 DVDDIO 4 C4063
102K C4022 CIN_V1
1K 1K 58 AIN4 DGND 3 104Z
P4006 C Y 104Z
C4023 YIN_V1 C4058 59 AIN11 HS 2
104Z 60 AIN5 VS 1
VIDEO 1 IN 10/50
VIN_V1
C4059 104Z R4052
33 R
RESET
DGND
DVDD
FIELD
C4024
AIN12
SCLK
ALSB
L4005
AIN6
NCC
75
SDA
R4022 75
75
P15
P14
P13
P12
10/50
NC
NC
NC
NC
NC
OE
LBC2518
220K
R4024
R4023
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
C4021
C4025
P4005 102K 104Z CIN_DVD
C Y
R4042
100 R4043
C4026 YIN_DVD
C4060
C4061
104Z
100
10/50
R4041
DVD IN
C4062
C4027 VIN_DVD
100
103K
104Z
R4027
R4026
R4025
10/50
75
75
75
5 C Y
R4028 C4110
COUT_MON
R4029 75 104Z
YOUT_MON
MONITOR R4030 75
75
OUT VOUT_MON
R4214
C4144
181J C4142
C4143
R4213
R4215
100k
100k
100k
181J
181J
C4020
102K

TX-SR604/604E/8460
E F G H
TO NADG-8816 TO NADG-8816
(SD-6:D1) (SD-6:D1)
P2004B P2006B
NOTE
GND_VD 10
10
C4151 10/50 9
C4152 10/50 8
C4153 104Z 7
SCL 6
SDA 5
VSYNC 4
VDRST 3
SDET 2
VMUT 1
9
8
7
6
5
4
3
2
1
SYCDET
SPRLCS
SPRLSB
OSDCS
OSDDA
OSDCK
SPRLB
SPRLF
SELY
SELV
GND_VD ALL NPN TRANSISTORS ARE EQUIVALENT TO 2SC1815-GR UNLESS OTHERWISE NOTED.
CIN_V4
VIN_V4
YIN_V4

C4148
C4149
104Z
104Z

EX) 030- 3pF 330- 33pF 331- 330pF 333- 0.033uF
VMUT TO SD-5:G3 EX) PRINTING SIDE
C4176 104Z CIRCUIT IS SUBJECT TO CHANGE FOR IMPROVEMENT.
PRIN_DAC
C4177 104Z PBIN_DAC

C4244 104Z
C4243 104Z
0.47/50
47k C4147
C4178 104Z R4147
SYCDET 2.7k
+5V_VDD
R4148
1SS352
14.23MHz OSD D4142 C4087
L4009
NCH-1572
24 PBIN1 C4079 X4001 1 30 474J L4008
PB1 VSS VDD1
23 C4242 100D 2 29 022K LBC2518
R4105 LBC2518
CY6 XTALIN1 SYNCDET
22 104Z 180J C4080 3 28 L4008 C4088 C4088 270J
L4007
022K
CY5 CYIN_DAC XTALOUT1 CVCOOUT
21 180J C4081 4 27 L4009 C4089 C4089 220J
CY4 HSYNCOUT VCOIN
20 CYIN3 5 26 056J C4090 C4090 223J
CY3 XTALIN2 FC
19 CYIN2 C4082 17.73MHz 6 25 R4104 R4103
C4091
6.8K
CY2 XTALOUT2 AMPOUT
1/50
18 CYIN1 080D X4002 7 24 120 1K

CY1 VSYNCOUT AMPIN
17 C4136 OSDCS R4100 2.2K 8 23 R4107 R4106
BIAS CS PDOUT
16 22/50 COUT OSDDA R4101 2.2K 9 22 1.5K 6.8K C4092 682J Q4017
LC74763-9836
C8 SIN VSS 2SC2712-GR

15 C4150 104Z CIN_DAC OSDCK R4102 2.2K 10 21 C4093 R4109 220
C7 SCLK SEPC 0.33/50
14 C4137 104Z
Q4004
C4083
11 20
C4085
R4111 R4110
470J
C6 SW1 SYNCIN
470J
470J
1K
13 12 19 R4108 C4094 122K 100/16

GND1 SW2 CVCR
12 CIN_V4 13 18 820K C4098
C5 SW3 CVIN
R4112
11 CIN_V3 COFF R4128 C4084 14 C4096

3.3K
R4113
17
10K
C4 SW4 VDD2
47K
10 CIN_V2 33 C4086 15 16 470/6.3

C3 RST CVOUT
9 CIN_V1 1/50
C2
8 CIN_DVD SDET C4097 C4095
C1
7 C4138 104Z OSDOUT_1 470J 104Z
VCC1
100/16
+5V_VD
R4120
R4121
C4099
6 C4139 OSDOUT_2 OSDOUT_2

R4125
R4124
Y8
220
220
220
220
5 10/50 YIN_DAC VOUT

Y7
R4114
4 C4140 Q4016
Y6
1SS352
3 104Z YIN_V4
R4118
C4100
D4001
SELV RN1443
68
104Z
Q4011
Y5
12k
2 YIN_V3
Y4 Q4012
RN2402
1 YIN_V2 Q4014 2SA1162-GR

Y3 2SA1162-GR
YOUT 1
C4101
104Z
Q4015 C4102 D4002

RN1443 Q4013 104Z 1SS352
R4117
R4119
2SA1162-GR
R4115
SELY
2.7k
10K
33k
R4116
C4141 2.2K
47/25
L4011
COFF
+5V_VDD
SCL
SDA
VDRST
VSYNC
+5V_VDD
TO SD-5:G3
SCL
+5V_VD
SDA
+5V_VD
D
R4159 Q4008 G
2SK3019
10k
S
R4031 D
0 G
Q4009 S R4058
2SK3019
2.2k
R4032
0
R4059
2.2k
Q4010
RN1401
1.2K
1.2K
R4061 100
R4063
R4064
104Z
104Z
C4066
R4060
46 C4067
37 C4068
C4065 4.7K
104Z
104Z
C4165 R4065
48
47
45
44
43
42
41
40
39
38
+3.3V
104Z 100 CYIN_DAC

PAL NTSC
VSO
VREF
RSET1
RESET
TTX
CLOCK
GND
SCRESET/RTC
CLAMP
TTXREQ
VAA
C4064 R4068 R4067 C4170

104Z 68 82 101J
1 36
C4073
VAA COMP1 R4080 R4081

104Z
R4051 33 2 35 C4171
P0 DAC A 101J
R4050 33 3 34 68 82
P1 VAA PBIN_DAC
R4049 33 4 33 C4074 R4082
P2 DAC B
R4048 33 5 Q4003 32 104Z 100
P3 VAA R4084 68
C4063 6 31 R4085 C4172
P4 GND
R4047 33 7
P5
ADV7172 VAA
30 C4075 82 101J
R4046 33 8 104Z PRIN_DAC
P6 VIDEO ENCODER DAC C 29 R4086
100 VIN_DAC
R4045 33 9 28 C4076
P7 DAC D
Q4018 R4044 33 10 27 105K R4090 100
FIELD/VSYNC
CSO_HSO VAA C4173

RN1401 C4069 11 26 R4088 R4089 101J
VAA GND
104Z 12 25 68 82 YIN_DAC
SCLOCK
GND DAC E
COMP2
HSYNC
SDATA
BLANK
RSET2
C4077 R4094
DAC F
C4174
ALSB
104Z 100
GND
GND
VAA
101J
R4092 68 82 R4093
13
14
15
16
17
18
19
20
21
22
23
24
C4078 R4098 CIN_DAC

R4075
R4074
R4079
R4077
R4078
R4076
105K 100
4.7K
C4072
4.7K
104Z
C4070 R4096 R4097 C4175

68 82 101J
10/16
100
1.2K
100
1.2K
C4071
104Z +3.3V
L4006
LBC2518
022K
<Note>

TX-SR604/604E/8460
A B C D
SPEAKER OUT SECTION
NAETC-8819 (2/2)
U14 VIDEO PC BOARD
1 L6602
P/W/G-TYPE
S1.3C
C6602
223Z
R6602 22 RL6602
6 1
R6612 22
8
P6601
C6652
102J
Q6602
NAETC-8790 (SD-8:B5)
2 3 DTC123JKA
01 HPL
J6851 5 4
02 LSPE
C6642
103J
JL6605B
D-TYPE C
03 HPR
04
P/W/G-TYPE
05 L6600 S1.3C
HPDET
R6600 22
C6651
MPUGND
C6641
390(1/2W)
103J
C6640
102J
D6600
103J
R6610 22 L R
R6691
1SS352
C6600
J6600 223Z
D-TYPE RL6600
C6650
5
6 1
390(1/2W)
R6992
DTC123
P/W/G-TYPE 102J Q6603
2 3
L6601 S1.3C
2 R6601 22 5 4
R6611 22
J6604
C6653
D-TYPE
D6603
102J
P/W/G-TYPE
10
C6654
1SS352
102J
P6602
L6603 S1.3C C6603
223Z
R6603 22
RL6603
103J
C6644
C6643
R6613 22 6 1
103J
SL SR
2 3
J6619
CSP
LSP
D-TYPE 5 4
TO NAAF-88911 (SD-2:E5)
01
P/W/G-TYPE
L6604 S1.3C
C6656
C6645
C6646
02
102J
103J
103J
SBL SBR
03 RSP R6604 22
JL6600B
04 SLSP R6614 22
3 05 SRSP
D6605
1SS352
5
06 SBLSP C6605
J6620 C6655
223Z
07 SBRSP D-TYPE
RL6605
102J
6 1
P/W/G-TYPE
L6605 S1.3C
2 3
R6605 22
5 4
R6615 22
J6626
D-TYPE D6607
1SS352
P/W/G-TYPE C6607
L6606 S1.3C 223Z
R6606 22 RL6607
6 1
R6616 22
2 3
4 J6625
D-TYPE
5 4
TO NAPS-8787
5 POFF
(SD-9:F1)
4 +12VD D9013 R9011

JL901B
3 MPUGND 1SS352 4.7(1/2W)

1SS352
2 +10S
1 POWERD APOWER D9012
SEC2-1
+5VDIS
Q9001
RN1405
Q9002
1SS352
RL1N4003 SEC2-2
D9017
3
2SC2235-Y
R9013
R9012
R9010 D9002 R9005 C9012

334J
1
1 FLAC1
1
TO NAETC-8788
R9006
82(1/2W) 220(1/2W) 4 1
8.2K
2 FLAC2
(SD-9:G2)
JL9101B
1SS352
1SS352
3 SEC3-1 D9011
D9015
D9014
C9001
470/63
R9003
+
8.2K
10000/16
D5SBA20
2
4 SEC3-2
C9011
5 SEC2-1
6 SEC2-2 POFF2
R9014
UDZS5.6B
C9013
3.3/50
UDZS36B
100k
C9006
C9005
47/50
D9005
R9004
223Z
D9024
33K
-VP
5
<Note>

TX-SR604/604E/8460
E F G H
Q6601
DTC123JKA
SPRLF
SPRLCS +22V 01
02
3JKA
RLGND 02
CSPE 03
LSPE 04 NAETC-8918
JL6603B
RSPE 05
SLSPE 06 U20
SRSPE 07 SPEAKER TERMINAL
08
SBLSPE
SBRSPE 09
PC BOARD
RLGND
Zone 2
C6658
C6657
102J
102J
R6690 +22V
10(1/2W)
TC123JKA
Q6603
SPRLB
P6607
SBRSPE 4
JL6604A
JL6604B
DTC123JKA SBLSPE 3
Q6604 SPBROUT 2
SBL SBR
SPBLOUT 1
C6647
C6648
103J
103J
TO SD-4:G1
SPRLB C6647, 6648, 6657, 6658
SPRLSB EXCEPT D TYPE
SPRLCS
SPRLF
TO NAVD-8928
GND_HD
(SD-10:B1 )
4
JL8001A
3
2
1
P/W/G-TYPE
(PURE AUDIO)
Q9022 R9017
D:+12V BA00JC5WT 0
D-TYPE ONLY
P,W,G:+10V Q9021 NCH-2541_470K R9018 LBC2518
1 5 VPOWER
SI-8008 L9001 Vc Adj 047K
R9028 0 L4015 +5V_VDD
1 2 +6V 2 4 +5V_VD
VIN SW Vin Vo
R9023 R9022
0.47(1/2W) GND +5V_VD TO SD-4:G3

C9022
100k
223Z
5 4
SS VADJ
R9020
R9027
3
10k
10k
GND
1SS352
D9020
470/16
470/6.3
C9021
C9024
470/6.3
C9023
C9025
223Z
6.8k
+
+
CRS09
D9021
3
R9021
R9008
1.5k
1.5k
R9024
0.47(1/2W)
33k
R9029
HPDET 16
VPOWER 15
+5V_XM 14
TO NADG-8816 (SD-6:D1)
Q9031 GND_XM 13
MPC2905HF +5VDIS 12
R9001 R9002 1 3 +5VDSP 11
I O
G
P2005B
D9022 3.3(2W) 3.3(2W) GND_VD 10

2
470/6.3
470/16
C9031
C9032
RL1N4003 GND_VD 9
+
GND_VD
+10VDSP 8
POFF 7
POFF2 6
APOWER 5
10S+12VD 4
-VP 3
FLAC1 2
FLAC2 1
1
2
3
4
NOTE
Q9031A
2
EX) 030- 3pF 330- 33pF 331- 330pF 333- 0.033uF
EX) PRINTING SIDE

TX-SR604/604E/8460
A B C D
SCHEMATIC DIAGRAM-6(SD-6) TYPE
P
R103
4.7(1/2W)
R104
YES
R106,R107
NO
TO NAVD-8819 TO NAVD-8819 T
DSP SECTION TO NADIS-8785 (SD-8:G2) P701A P101A TO TUNER PACK
D,W,G 10(1/2W) NO YES
(SD-4:F1)
P2004A
(SD-5:G4)
P2005A
HPDET 16
+5VXM 14
GNDXM 13
+5VDSP 11
10
11
12
13
VPOWER 15
GNDA 10
NADG-8816
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
+5VDSP 12
APOWER 5
FLAC2 1
PLLSCL 1
PLLSDA 2
STEREO 3
SD 4
+9VTU 5
GNDTU 6
TU_L 7
8
TU_R 9
+10VDSP 8
POFF2 6
4
3
10
1
2
3
4
5
6
7
8
9
GNDDG 9
FLAC1 2
3
4
1
10
2
6
7
9
8
VCSDA
VSYNC
VCRST
VCSCL
LEDZONE2
V4CIN
V4YIN
LEDSTBY
VMUT
SDET
KEYINT1
KEYINT0
POFF
GNDMIC
FLDSDO
MICMUT
SPRLZ2
MICOUT
FLDRST
+10S
MICDET
FLDCLK
GNDV4V
GNDDG
GNDDG
+12VA
+5.6DIS
GNDV4V
V4V
V4CIN
+5VDIS
-12VA
OPTF
FLDCS
REMIN
-VP
GNDV4
FLAC2
FLAC1
V4YIN
VOLB
VOLA
U12
KEY3
KEY2
KEY1
KEY0
V4_L
V4_R
V4V
-VP
1 DSP PC BOARD
D103 D102 D101
R107 LIST
R104 LIST
R106 LIST
OSDINY
OSDINV
RL1N4003
SELY
SELV
C103
100/16
RN2402
+5.0V
Q164 RN2402
RDSDAT
RDSCLK
C102
Q163
104Z
JL6402B
R164
TO NAETC-8913
R103
LIST
47
10K
R163
47
Q162
(SD-2:B2)
RN1404 Q161
R162 100K
RN1404
R105
3 THERMAL
R161
100K
2 +5VDSP
1 GNDDG
6 SBZ2MUT
SD-1:F1
5 Z2MUT
P301A
4 TRGZ2
3 GNDDG
2 +5VCPU R748
2.2(1/2W)
TXMUTE
VMSDO
VMRST
D742
VMCLK
1 IRIN 1SS355
R742 6.8K
OUTPUT
Q742
_SHUT
14 AMUT SI8008TM R743 6.8K
INPUT
BD7820
+12V
Q741
GND
-12V
13 VOLH L741
DAJ
1 2 +4.1V +3.5V
12 SEC1H VIN SW
470/16
2 11 PROTECT 5 4 470K D744 R745 1.2VDSP
C742 104K
SD-1:D1
R744
1
2
3
4
5
RL1N4003 39K
1000/6.3
SS VADJ
CRS09
C743
10 VOLCLK
R749 3.9K
D741
P302A
10/50 (VX)
0
R741 1K
R746
+
9 VOLDAT GND
39K
R747
100/16
C741
C746
33K
D743
3
8 GNDDG
C745
+
+
7 +12VA 1SS355
6 -12VA
5 GND+12V Q746 TA48033AF
1 3 +3.3V
4 DAC_CT I O
100/16
10/50
C748
C747
G
3 DAC_SW
(VX)
R580
+
2 DAC_FL
0
2
1 DAC_FR
TO NAAF-8911(1/2)
14 DAC_SBL
10
13 DAC_SBR
9
8
7
6
5
4
3
2
1
GND
_G1
C154 104Z
A8
A7
A6
A5
A4
A3
A2
A1
12 DAC_SL
11 DAC_SR
SD-1:C1
10 LTAD Q154 TC74VHC541FT

P303A
VCC
9 RTAD
_G2
Y8
Y7
Y6
Y5
Y4
Y3
Y2
Y1
8 MICOUT
R591 22(1/2W)
11
12
13
14
15
16
17
18
19
20
7 V4_R 22(1/2W)
R592
6 GNDV4
C591 + 220/25 (VX)
5 V4_L
C592 + 220/25 (VX)
BLM21PG221SN1
R151 47
R152 47
R153 47
4 TU_R +3.3V
3 GNDTU
L153
2 TU_L
1 RI
+12V_OP
-12V_OP
P801A
C341 101J
R351 10K
3 R578 SBR
R341
10K
2
Q341:B
1
C324 R324
+
18
17
SPDIFOUT
VMRST_3.3V
TO NAVD-8928 P8003B
3 56
R326
3.9K
(VX) 10/50
C326
222J
0 16 VMSDO_3.3V
15 TXMUTE_3.3V
NE5532APSR C323 R323
+ 14 VMCLK_3.3V
SD-1:B1
(VX)10/50 56 13 RXMUTE_3.3V
(SD-10:D1)
NE5532APSR C322 10/50+
12 VMSTB_3.3V
P304A
R322
R325
3.9K
C325
222J
3 4 (VX) 56 11 VMSDI_3.3V
5
2 10 HDMISPF
1 R342 Q341:A + 9 GNDHD
6 7 C321 R321
10/50 56 8 GNDHD
10K
8
(VX) 7 PCMLR
R577 SBL R352 10K
6 PCMBCK
C342 101J 5 PCMLRCK
0
4 PCMCSW
3 PCMSLR
2 PCMSBLR
1 MCK_HDMI
C320 104Z
R576 SR
LBC2518T470M
0
C171 104Z +3.3V L171
+12V
-12V
Q171 TC7WU04FU
C428
R458
331J
4.7K
1 8 LM182
VD L172
NE5532APSR 2 7
R478 R438 R418 3 6
180 470
8
6 3.3K SBR- 4 5 L173

GND
C408
222J
7 R428 LM182
Q404 R171 1M
HDMISPF
5 470 SBR+
L302
C418 R468
4
R408
4
060D
C173
SL R448
060D
C172
R575 331J 180 4.7K 3.3K X171
24.576MHz
C417
C316
331J
0 NE5532APSR R467 R447

180 4.7K R407 3.3K SBL+ 221J
R457 C407
4.7K 222J R456 4.7K 222J
1 3 R477 R427 L
Q404
180 470 R417 3.3K
DIGSDO_3.3V
2 SBL-
LM182
DIRRST_3.3V
R304 220 DIGCLK_3.3V

DIGSDI_3.3V
C318
DIRINT_3.3V
104Z
R307 220 DIRCS_3.3V
R302
C427
331J
R437
104Z
470 47
47
R301 47
4.7K
C426
331J
470/6.3
R476
C302
5 C315 104Z
(VX)
180 R416 3.3K
R303
L312
8
C305
+
220
R574 SW
47
R308 47
R446C406
7 6 R436
R309
220
Q403
0 5 R466 470 R406 3.3K
R306
R305
C416 180
4
R426
+3.3V
NE5532APSR 331J 47/25(RFS)
16
15
14
13
12
470
6
4
3
2
1
C306
C415
331J
AINL-
AINL+
AINR-
INT1
AINR+
_RST
VLC
CS/AD0
DGND1
VD1
CDIN/AD1
CDOUT/SAD
CCLK/SCL
CX_SDIN1
CX_LRCK
CX_SCLK
NE5532APSR R445 +
R465 4.7K R405 3.3K C307 17 64
+12V
-12V
VQ
R455 C405
4.7K 333J R454 4.7K 222J
1 3 180 R425 104Z 18 63

Q403 R475 470 R415 3.3K + C308 19 FLT+
2 62
REFGND
C425
331J
180 R435 100/16 20 64:CX_SDIN2 61

AOUTB4- SAI_SLCK
470 21 63:CX_SDIN3 60
AOUTB4+ SAI_LRCK
4.7K
22 62:CX_SDIN4 59
C R573 AOUTA4+
Q301 OMCK
C424
273J
23 AOUTA4- ADCIN1
58
R474 R434 R414 C309 24 57
0 VA CS42518-CQ ADCIN2
R444C404
2 1
180 470 3.3K 104Z 25 56
Q402 R404 3.3K AGND1 CX_SDOUT
3 R464 SR- 26 DIR,CORDEC 55
AOUTB3- RMCK
273J 180 R424 SR+ 27 54
NE5532APSR C414 AOUTB3+ SAI_SDOUT
470 SL+ 28 53
AOUTA3+ AOUTB2+:31 50:TXP VLS
C413
331J
NE5532APSR R463 R443 R403 SL- 29 52

4.7K 3.3K AOUTA3- AOUTA2+:32 49:RXP0 DGND2
NE5532APSR 180
4
NE5532APSR NE5532APSR FR- 30 51

AOUTB2- VD2
R453 C403
R492 Q411
10K 471J R441 10K 471J R452 4.7K 222J
Q431 R542 Q421 7 5 FR+ 31 50

RXP7/GP7
RXP6/GP6
RXP5/GP5
RXP4/GP4
RXP3/GP3
RXP2/GP2
RXP1/GP1
R423
AOUTB1+
AOUTA1+
Q402
AOUTA2-
AOUTB1-
AOUTA1-
R473 470 R413

LBC2518T4R7M
6 C303 32 49
R552
MUTEC
22K 10K
AGND2
+
1.5K
LPFLT
VARX
C423
6 R512 R502 6 R482

331J
8
470/6.3
8
8
6
8
180 R433 3.3K

FR
L303
(VX)
5 7 7 22K 1.5K 7 10K 470
33
34
35
36
37
C310 222K 38
39
R311 40
2.7K 41
42
43
44
45
46
47
48
5 5 C442 5
471J
10K
C422
121K
4
R472
4
SW-
4
R412
R522
R532
R562
180 +5.0V
1.5K
22K
22K
3.3K
C311 473K
C432
R442 C402
122J 1 Q401 2 R432 SW+ LBC2

680 R402 3.3K
470/6.3
3 R462 C-
C312
C304
(VX)
+
C411 C412
104Z
121K 121K
180 R422 C+
NE5532APSR NE5532APSR NE5532APSR 680
R521
R531
Q421
22K
Q411 NE5532APSR R461

10K
22K
C431 180
4
NE5532APSR R401 C331 R331

R561
FL+ 330
1.5K
122J +5.0V
R451 C401
Q431 3 3 C441 3 7 5 R421 3.3K C333 R333 330

Q401
FL 1 1 471J 1 6 R471 680 R411 FL- C334 R334 330
C421
22K 1.5K 10K

121K
2 2 2 R431 3.3K C336 R336 330

R551
180 C331-337
1.5K
R511 R501 R481 680 330J C337 R337 330

22K R541 10K R491 C332 R332 330
C335 R335 330

TX-SR604/604E/8460
E F G H
TO NAVD-8819 TO NADG-8817
(SD-4:F1) (SD-7:G5)
P2006A JL101A
9
8
1
7
SPRLZ2 10
6
5
4
3
OSDSDO 2
1
2
XMREQERR 0 3
XMSRSEL R101 4
5
6
7
8
9
TYPE R101 TYPE JL101A TYPE R678 R682 R683 R684 R685
XMDACRST
OSDCLK
SPRLCS
SPRLSB
D YES D YES
XMSRRXD
OSDCS
XMCOMSEL
NO 0 NO 10K 33K
XMSRTXD
D
SPRLF
GNDXM
+5VXM
SYNC
NONE P,W,G NONE

SELY
SELV
P,W,G PP 33K 10K 10K 10K 10K

XMRST
W,G,PA 33K 10K 10K NO 10K
P131
R672
1M R133 LBC2518T2R2M
R135 L131
104K 10
220K
COAX1
+5VCPU
C133 C131
R761 10K
R771 10K
+5.0V R732 RN2402 RN2402 RN2402 R131
47 Q752 Q762 Q772 101J 75
R751
10K
C132 R132
AMUT 470/6.3
RN2402
LIST
LIST
C753
C134 101J 75 L132
COAX2
10K
10K
RN1404
+
Q602 RN1404
R763
C772 R773
Q751
R753
SBZ2MUT
Q761 R136 104K R134 LBC2518T2R2M
1K
1K
105K 1K
R752 R762 R772 220K 10 C146
R685
R683
R681
R679
R678 LIST
Z2MUT
2.2K 2.2K 2.2K OPT1 103K GP1FAV51TKBF
C147 103K
+
C752
C762
105K
105K
C751
1SS355
1SS355
C761
D104 OPT2 U131
1/50
C771
D604
Q771
1/50
1/50
R682 LIST IN
D703 +5VCPU OPT3 R141 47
DIGITAL IN
L133
1SS355
D702
1SS355
RI R684 LIST RN1404
LBC2518T4R7M +5.0V
VCC OPT1
+5.6V
10K
Q702 D701
S812C56AUA-C3G-T2 1SS355 GND
+5VMPU
SYSOUT
STEREO
220 PROTECT
220 THERMAL
BAND
1K HPDET
2 3
SEC1H
VOLB
TRGZ2
VOLH
IRIN
C141
220 REMIN
SBZ2MUT
INT1
INT2
INT3
SD
I O
SPRLCS
C706 470/16
APOWER
VPOWER
SPRLSB
C135 080D
R775 0
POFF2_5
VOLDAT
R105
VOLCLK
SPRLZ2
MJJ ONLY
104Z
C701 104Z
D705
AMUT
GP1FAV51RKF5
C705 1SS355
SPRLF
220K
R137 10K
UDZS5.1B
G
C704 R731
100/16
R142
DX-5R5L224
1K
U132
+5.0V
C702
C614 102K
C611 IN
+
+
1
47
D603
220
47K
220
100/16
R6971K
104Z
R686 COAX1 OPT2
R690
R695
C607 VCC
R674
+
220
104Z
C139 + 220/6.3
1
2
3
4
5
6
7
GND
104Z
OUT4 GND
R671 220
R670 220
220
220
220
220
R673 220
47
47
C142
74HCU04F
R693 1K
104Z
R687
R689
R691 1K
R677
R676
R675
27K R694 C613 GP1FAV51RKF5

C612
Q131
104Z R143
104Z
27K R692 U133

C615 102K
R669
R668
R667
R666
R665
R664
OUT6
OUT5
IN
R713 10K
R710 10K
R706 10K
R696
VCC
C140
+5.0V
10K 47
IN6
IN5
IN4
OPT3
101
102
100
VCC
96
98
95
94
93
68
67
65
99
97
91
90
87
85
75
69
66
92
88
86
84
83
81
80
78
76
73
71
89
82
79
77
72
70
74
14
R138 13
10K 12
11
C136 10
9
R139 10K 8
R698 L134
P30/A8(/-/D7)
P20/AN20/A0(/D0/-)
P11/D9
P12/D10
P13/D11
P14/D12
P15/D13/INT3
P16/D14/INT4
P17/D15/INT5
P21/AN21/A1(/D1/D0)
P22/AN22/A2(/D2/D1)
P23/AN23/A3(/D3/D2)
P24/AN24/A4(/D4/D3)
P25/AN25/A5(/D5/D4)
P26/AN26/A6(/D6/D5)
P27/AN27/A7(/D7/D6)
Vss
Vcc2
P120
P121
P122
P123
P124
P31/A09
P32/A10
P33/A11
P34/A12
P35/A13
P36/A14
P37/A15
P40/A16
P41/A17
P42/A18
P43/A19
VOLA 103 64
P125 GND
080D
104 1K 63 LBC2518T470M C143
P126 104Z
080D
LEDZONE2 105 62 GP1FAV51RKF5
C138
P127 R144
106 61 R663 R662 10K COAX2 U134
P50/WRL/WR IN
LEDSTBY 107 60 10K DIGSDO TX C137
R701 220
P04/AN04/D4 P51/WRH/BHE 220
DIGITAL
P44/CS0
P45/CS1
P46/CS2
P47/CS3
FLDSDO 108 59 220 DIGSDI 104K
220/6.3
P03/AN03/D3 P52/RD R140 VCC
C145
FLDCLK R702 220 109 58 R660 DIGCLK 220K OUT
+
P02/AN02/D2 P53/BCLK
FLDCS R703 220 110 57
P01/AN01/D1 P10/D8 P130 GND
FLDRST R704 220 111 56 MCHSEL C144
P00/AN00/D0 P07/AN07/D7 P131
MICDET R705 1K 112 Q701 M30627FHPGP 55 DIRCS_3.3V 11 10 104Z
Q151 TC74VHC541FT
P117 P06/AN06/D6 P132 Y8 GND
MICMUT R707 220 113 54 DIRRST_3.3V 12 9 DIRCS
114
P116
P07/AN07/D7
P05/AN05/D5
Main Microprocessor P133
P54/HLDA
53 R656 DSPRST DSPCS_3.3V 13
Y7
Y6
A8
A7
8 DIRRST
115 52 10K RESET_3.3V 14 7 DSPCS
P06/AN06/D6 P60/CTS0/RTS0 P55/HOLD Y5 A6
VMRST R708 220 116 51 DSPCS MCHSEL_3.3V 15 6 DSPRST
P96/ANEX1/SOUT4
P113 P61/CLK0 P56/ALE Y4 A5

P92/TB2IN/SOUT3 P97/_ADTRG/SIN4
VMSTB R709 220 117 50 DIRRST DIGCLK_3.3V 16 5 MCHSEL

P112 P62/RXD0/SCL0 P57/RDY/CLKOUT Y3 A4
TXMUTE R711 47 118 49 DIGSDO_3.3V 17 4 DIGCLK
P111 P63/TXD0/SDA0 P134 R651 10K Y2 A3
RXMUTE R712 220 119 P110 48 220 DSPCLK_3.3V 18 3 DIGSDO
P64/CTS1/RTS1/CTS0/CLKS1 P135 Y1 A2
47 R727 C151
34 P71/RXD2/SCL2/TA0IN/TB5IN
R714 10K 120 OSDINY 19 2 DSPCLK

P107/AN7/KI3 P65/CLK1 P136 _G2 A1
R715 10K 121 46 OSDINV 104Z 20 1
Avcc
Vref
P70/TXD2/SDA2/TA0OUT
P106/AN6/KI2 Vss VCC _G1

P73/CTS2/RTS2/TA1IN/V
P137
KEYINT1 R716 4.7K 122 45 R726 220 DIRCS +3.3V
P105/AN5/KI1
R280
P72/CLK2/TA1OUT/V
R717 44 R652 220
10K
KEYINT0 4.7K 123 XMRST TC74VHCT08AFT
P104/AN4/KI0
R718
P95/ANEX0/CLK4
KEY3 4.7K 124 43 R650 220 XMSRRXD Q152

P90/TB0IN/CLK3
P67/TXD1/SDA1
P66/RXD1/SCL1
P91/TB1IN/SIN3
P74/TA2OUT/W
P103/AN3
P94/DA1/TB4IN
P93/DA0/TB3IN
P80/TA4OUT/U
KEY2 R720 4.7K 125 42 R649 220 XMSRTXD DIRINT0 8 7 R279 10K
P75/TA2IN/W
P76/TA3OUT
GND
P81/TA4IN/U
P102/AN2
P86/XCOUT
KEY1 R722 4.7K 126 P101/AN1 41 R648 47 FBUSY DIRINT_3.3V 9 6 DEC

P77/TA3IN
P87/XCIN
23 P84/INT2
P83/INT1
P82/INT0
P85/NMI
2.7K
2.7K
2.7K
127 40 FCLK 10 5 DEC_DSP_3.3V

RESET
CNVss
R724 AVss
BYTE
P141
P140
KEY0 128 47 DSPINT2 11 4

Vcc1
Vcc1
39 R647
Xout
Vss
P100/AN0
20 Xin
4.7K DSPINT_3.3V 12 3 NIC

C616-621
R646 10K
R719
C616
C617
C618
R723
R721
11
21
31
R725
16
1
10
15
22
24
25
28
36
38
12
14
17
26
27
30
35
2
19
29
32
33
37
3
8
9
13
18
4
13 2 NIC_DSP_3.3V
102K
2.7K
R645 47 FRXD 14 1
VCC
BLM21PG221SN1 R278 10K
C601 104Z
104Z
R620
C152 104Z
104Z
D601 C619
104Z 10K
C621
R619 47K
10K
C610
+5.0V
220
220
220
220
220
220
220
R618 220
R631
R632
R634
R636
R638
R640
R642
C620
47
47
R615
R644 FTXD
+5LOGIC
L152 +5.0V
1SS355
10K
C605
C602
R601
R603
R605
R607
R608
R609
R610
R612
R613
47
C603 104Z
R626 Q153
R625
R621
TO FLASH WRITER
9 RESET TC74VHCT08AFT
220
220
220
220
220
220
220
220
220
47
47
+ 1M C609 101J 8 CNVSS RXMUTE 8 7

GND
C604 Q601 C606 C608 101J 7 FRXD RXMUTE_3.3V 9 6 DIGSDI
R623
R627
R628
R629
4.7/50 RN1404 R617 R643 2.2K 6 FCLK 10 5 DIGSDI_3.3V

104Z
1SS355
RDSDAT R616 1K
R602 10K 10K R641 2.2K 5 +5VCPU VMSTB 11 4

RDSCLK XMREQERR
D602
R618,R627, R604 10K R630 10K 4 FBUSY VMSTB_3.3V 12 3 VMSDI

X701
TYPE R616 R617 R628,R649, R625 R626 R633 10K 3 FTXD 13 2 VMSDI_3.3V
6.000MHz
XMCOMSEL
XMDACRST
R652 R606 10K R62210K R635 10K 2 GNDDG 14 1

XMSRSEL
VCC
OSDSDO
DSPINT2
10K
OSDCLK
D NO YES YES 220 NO R637

DSPCLK
1 APOWER
DIRINT0
VMSDO
OSDCS
VMCLK
CNVSS
VSYNC
VCRST
RESET
VMSDI
PLLSDA
PLLSCL
R639 10K C153 104Z

VMUT
P YES NO NO 1K NO
SYNC
POFF
SDET
L151
DEC
P751A
NIC
W, G NO YES NO NO YES
R624
10K
BLM21PG221SN1
+5VDSP C281 + 220/6.3

BLM21PG221SN1
BLM21PG221SN1
C282 104Z
MCHSEL_3.3V
+3.3V L281
R625
BLM21PG221SN1
BLM21PG221SN1
L202
1K:D-TYPE BA1 25 24 A0
DSPCLK_3.3V
A0 A1
DSPINT_3.3V
L181
DSPCS_3.3V
220:PP CS2 26 23 A1
CE# A2
FLASH ROM
L201
22 A2
Q282 ES29LV400ET-70TG
27
GND A3
OE 28 21 A3
SD_CS
OE# A4
104Z
104Z
D0 29 20 A4
104Z
104Z
Q0 A5
R250 330
D8 30 19 A5
Q8 A6
D1 31 18 A6
+3.3V
C181 104Z
D1.2V
Q1 A7
330
D9 32 17 GPIO5
R251
CS2
RESET_3.3V
C227
C209
BA0
BA1
C226
C208
Q9 A17
A10
104Z
C225
R190
RAS
OE
330
A0
A1
A2
A3
A4
A5
A6
A7
D2
A11
33 16
+5VDSP
C271 +1.2V
A8
A9
R181 330 C272 Q2 NC

1 16 + D10 34 15
SELECTVCC 470/6.3 Q10 RY/BY#
R182 330 2
1A ST
15 470/6.3 + D3 35
Q3 NC
14
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
T470M R183 330 3 14 +3.3V D11 36 13

1B 4A Q11 NC
12 R287 330
4M Bit
171 4 13 R193 330 37
EM_A[7]
EM_A[8]
EM_A[9]
EM_A[11]
EM_OE
EM_CS[2]
EM_CS[0]
EM_BA[0]
EM_BA[1]
EM_A[10]
EM_A[0]
EM_A[1]
EM_A[2]
EM_A[3]
EM_A[4]
EM_A[5]
EM_A[6]
EM_RW
VSS
EM_RAS
VSS
VSS
VSS
VSS
DVDD
CVDD
DVDD
CVDD
CVDD
DVDD
CVDD
DVDD
1Y 4B R286 VCC RESET#

R185 330 5 12 D4 38 11 WE
2A 4Y 10K 109 72 Q4 WE#
6 11 VSS D12 39 10
182 2B 3A
L182 LM182
R252 110 71 LL241 CKE Q12 NC

72 7 10 DIGSDO_3.3V EM_CKE D5 40 9
R186 330
R172 47 2Y 3B 330 111 70 L203 CLK Q5 NC

8 9 DIGSDI_3.3V EM_CLK D13 41 8 A7
GND 3Y Q13 A8
R253 47 112 69 R221
R188 47
R191 47
D6 42 7 A8
VSS
SPIO_CLK/I2C0_SCL
SPIO_SCS/I2C1_SCL
SPIO_ENA/I2C1_SDA
73 R173 47 VSS Q6 A9
R254 47 113 68 47
Q282
330
Q181 AXR0[0] VSS DVDD D14 43 6 A9

R189
182 114 Q14 A10

LBC2518T4R7M
TC74VHC157FT 67 DQM1 D7 44 5 A10

VSS SPIO_SIMO EM_WE_DQM[1] Q7 A11
R255 47 115 66 D8
L302
AXR0[1] SPIO_SOMI/I2C0_SDA EM_D[8] D15 45 4 A11

47 116 65 Q15/A-1 A12
R256 AXR0[2] DVDD CVDD 46 3 GPIO1
GND A13
R184
47
R257 47 117 64 D9 47 2 GPIO2

AXR0[3] EM_D[9] BYTE# A14
118 63 D10 GPIO4 48 1 GPIO3
CX_SDIN1 VSS EM_D[10]
R281-284
10K 119 62 A16 A15

R258
R281
R285
R284
AXR0[4] VSS
10K
10K
LBC2518T2R2M R259 330 120 61 D11

AXR0[5]/SPI1_SCS EM_D[11]
SAI_SDOUT GPIO1 121 60 C224
R302 L301 AXR0[6]/SPI1_ENA] DVDD
GPIO2 122 Q201 59 D12 104Z C283 220/6.3 +3.3V R282 R283
BLM21PG221SN1
AXR0[7]/SPI1_CLK EM_D[12] +
47 123 58 D13
CVDD EM_D[13] 104Z L282
C228 124
VSS TMS320D707E001RFP250 CVDD
57 C284 1 50
470/6.3
104Z 125 56 VCC0 GND2

DIR_SDOUT
D14
(VX)
DPSCLKIN
DIR_LRCK
DVDD EM_D[14] D0 D15

CX_SDIN2
CX_SDIN3
CX_SDIN4
SAI_LRCK
PCMSBLR
2 49
CX_LRCK
CX_SCLK
L282
126 DSP 55 DQ0 DQ15

+
GPIO3 D15
AXR0[8]/AXR1[5]/SPI1_SOMI EM_D[15] D1 3 48 D14
GPIO4 127 54 DQ1 DQ14
OMCK
AXR0[9]/AXR1[4]/SPI1_SIMO VSS 4 47
128 53 C207 GNDQ1 GNDQ4
CVDD CVDD D2 D13
M12L16161A-7TG
(VX) 5 46
129 52 D0 104Z DQ2 DQ13
+3.3V
470/6.3 VSS EM_D[0] D3 6 45 D12

SD RAM
+ GPIO5 130 51 D1 DQ3 DQ12

or IC42S16100
SAI_SLCK
DIR_BCK
AXR0[10]/AXR1[3] EM_D[1] 7 44
C301 R260 131 50 VCCQ1 VCCQ4
GNDDG 145
64 R319 47 DEC_DSP_3.3V AXR0[11]/AXR1[2] THERMALPAD DVDD D4 8 43 D11

C210 47 132 49 D2 DQ4 DQ11
63 R318 47 CVDD EM_D[2] D5 9 42 D10
104Z 133 48 D3 DQ5 DQ10
R317 47 VSS EM_D[3] 10 41
62 NIC_DSP_3.3V 47 R261 134 47 GNDQ2 GNDQ3
61 L313 R316 47 AXR0[12]/AXR1[1] VSS D6 11 40 D9
CK R262 135 46 D4 DQ6 DQ9
R315 47 AXR0[13]/AXR1[0] EM_D[4] D7 12 39 D8
AHCLKX0/AHCLKX2
CK
60 C229104Z 136 45 D5 DQ7 DQ8
R314 47 R262- DVDD EM_D[5] 13 38 C286
59 C206
Q281 16M bit
CK PCMSLR R263 137 44 VCCQ2 VCCQ3

58 R269 AXR0[14]/AXR2[1] CVDD DQM0 14 37 104Z
PCMCSW R264 138 43 D6 104Z LDQM NC2
LM182
N1
+5.0V
330 AXR0[15]/AXR2[0] EM_D[6] WE 15 36 DQM1

L313
57 SAI_SLCK R265 139 42 C223 _WE UDQM

AHCLKX1
N2
AMUTE0
AMUTE1
56 ACLKR0 DVDD CAS 16 35 CLK

UT 140 41 D7 104Z _CAS CLK
55 47 VSS EM_D[7] RAS 17 34 CKE
VSS
CK SAI_LRCK R266 141 40 _RAS CKE

54 R312 AFSR0 VSS SD_CS 18 33
UT CX_SCLK R267 142 39 DQM0 _CS NC1
Q281
53 104Z ACLKX0 EM_WE_DQM[0] BA0 19 32 A9

LS RMCK R268 143 38 WE A11 A9
52 C314 AHCLKR0/AHCLKR1 EM_WE A10 20 31 A8
CX_LRCK 144 37 CAS A10 A8
OSCOUT
OSCVDD
R269
OSCVSS
D2
ACLKR1
ACLKX1
C313 AFSX0 EM_CAS A0 21 30 A7

RESET
EMU[0]
EMU[1]
51
AFSR1
AFSX1
OSCIN
PLLHV
CLKIN
A0 A7
CVDD
DVDD
CVDD
CVDD
DVDD
CVDD
TRST
D2 A1 29 A6
TMS
TDO
22
VSS
VSS
VSS
VSS
VSS
VSS
TCK
VSS
50 104Z TX R290 104Z C230

TDI
10K C213 A1 A6
28
49 R338 47 A2 23 A5
C214 104Z C231 A2 A5
10
11
12
13
14
15
16
17
18
19
R208 10K 20
21
R209 10K 22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
1
2
3
4
5
6
7
8
9
+3.3V A3 24 27 A4
C215 104Z A3 A4
C285 25 26
C232 VCC1 GND1
R207 330 +1.2V 104Z
104Z
104Z
R200
104Z C222
C205
C204
C230-232
104Z
330
RMCK
10K
+5.0V L304
104Z
JTAG P711
LBC2518T4R7M
101J
C202
R201
104Z C201
104Z C221
2 1 104Z C242
10K R202
10K R203
10K R204
10K R205
104Z
C203
470/6.3
C304
(VX)
4 3
+
RESET_3.3V +
6 5
C245
R206 C241
8 7 330 470/6.3
10 9
331 330 OPT3
12 11
333 330 OPT1
14 13 <Note>
+3.3V
TRST
EMU0
EMU1
334 L241
EMU0
TRST
330 OPT2
TMS
EMU1
TDO
TCK
TDO
TMS
TCK
ACF451832-333
TDI
TDI
336
337
330 COAX1 SD-x:XY is short for Shcematic Diagram-x and
330 COAX2
332 330 HDMISPF each socket's location, X=A to H, Y=1 to 5.
335 330 OPTF

TX-SR604/604E/8460
A B C D
XM SECTION
NADG-8817
1 U13 XM PC BOARD
Q2
AK43
I2S_OCLK R2012 100 1
MCLK
I2S_SCLK R2013 330 2
BK1608LM182
BICK
I2S_SDO R2014 330 3
SDTI
I2S_LRCLK R2015 330 4
LRCK
L2002
R2016 5
PDN
0 6
SMUTE/C
C2014 7
ACKS/CC
102K 8
DIF0/CDT
DAC_RESET
C2013
C2012
104Z
104Z
48
47
46
45
44
43
42
41
40
39
38
37
I2S_OCLK
SAII_EN
SAII_DA
SAII_CLK
VSS
VSS
I2S_CLK
I2S_DA
VSS
VDD
I2S_LRCLK
VDD
2 1
LSDP HSDP_EN
36
2 35
VSS VSS
XM_SDI_L 3 34
SC_TX_OUT HSDP_CLK
C2001 4 33 C2011
VDD VDD
XM_SDO_L 104Z 5
SC_RX_IN
Q2001 HSDP_DA
32 104Z
6 31
XM_COM_SEL 7
VSS XMDTIC VSS
30
CMD_SEL TEST
R2002 8 F2602E-01 29 C2009
45.1584MHz
VDD VSS
XM_ERR_IRQ 100K 9 28 080D
ERR_IRQ OSC_IN
R2011
X2001
10 27 C2010
1M
COMM_RX_DIG
COMM_TX_DIG
VSS VDD
COMM_TX_EN
XM_RESET
COMM_RX_M
11 26 104Z
COMM_TX_M
COMM_RX_P
COMM_TX_P
RST OSC_OUT
12 25 R2010
R2001
R2003 100K
SLAVE VSS
C2002
_SEL C2008 680
102K 040C
VDD
VDD
VSS
VSS
VSS
100K
100K
R2004
T
13
14
15
16
17
18
19
20
21
22
23
24
+3.3V_XM L2001 +3.3V
LBC2518T2R2M
R2005
100/16
C2007
100K
470/6.3
C2003
C2033
104Z
3
104Z
R2006
C2004
R2008 104Z
1K
100 C2005
R2007
1K
R2009 C2006
100 104Z
NOTE
5 ALL PNP TRANSISTORS ARE EQUIVALENT TO 2SA1015-GR UNLESS OTHERWISE NOTED.

EX) 030- 3pF 330- 33pF 331- 330pF 333- 0.033uF
EX) PRINTING SIDE

TX-SR604/604E/8460
E F G H
R2031
C2025 22(1/2W)
NE5532APSR
821J
8
C2021 R2021 R2025
Q2002 3
C2027
TO NAAF-8911 (SD-1:C1)
AK4384ET C2018
10/50 2.2K 2.2K
Q2003
1
2
C2023
470/6.3 10/50
821J
16
R2023
100K
LK DZFL
220/16
C2029
15 R2027 XM_L 1
K DZFR
C2017 R2030 R2029 2.2K XM_R
3.3K
14 2
TI VDD
13 104Z GND_A 3
JL5502B
CK VSS C2016
3.3K
12 4
N VCOM
11 10/50 R2028 5
C2030
R2024
220/16
100K
UTE/CSN AOUTL
C2024
C2015
821J
10 2.2K +12V 6
KS/CCLK AOUTR 6
9 104Z C2028 -12V 7
0/CDTI P/S 7
C2022 Q2003
R2022 R2026 5
+5V 10/50
10/50 2.2K 2.2K
4
C2026
821J NE5532APSR
R2032
C2031
104Z
22(1/2W)
L2003
2
1 3 LBC2518T2R2M
G
O I
Q2005
78L05
C2044
102K
E2002
Q2004
TA48033AF R2047
22(1/2W)
V 3 1
O I
G
E2001 E2003
2
470/6.3
C2032
C2043
100/16
104Z
L2004
BLM21PG221SN1
100/16
C2034
C2042
104Z
4 GND P2001
R2033 22 3 D+
R2034 22 2 D- XM
1 +V
L2005
BLM21PG221SN1
R2036
0 D2001
UDZS5.1B
Q2006
TC74HCT7007AF C2035
XM_ERR_IRQ 1 14 104Z R2044
VCC
2 13 220
IN6
XM_SDI_L 3 12
OUT6
4 11
IN5
5 10
OUT5
6 9
IN4
7 8
GND OUT4
Q2007
TC74VHC541FT
TO NADG-8816 (SD-6:E1)
DAC_RESET 11 10
Y8 GND
XM_COM_SEL 12 9 XMDACRST 1
Y7 A8
XM_SDO_L 13 8 XMCOMSEL 2
Y6 A7
XM_RESET 14 7 XMERRIRQ 3
Y5 A6
15 6 XMSRSEL 4
JL101B
Y4 A5
16 5 R2035 XMSRTXD 5
Y3 A4
17 4 0 XMSRRXD 6
Y2 A3
18 3 R2046 XMRST 7
Y1 A2
19 2 0 GND 8
_G2 A1
20 1 +5V_XM 9
VCC _G1
C2036
104Z
<Note>

TX-SR604/604E/8460
A B C D
NADIS-8785
DISPLAY SECTION
U01 DISPLAY PC BOARD
Q7002
1 16-BT-128GNYK
16G
15G
14G
13G
12G
11G
10G
P35
P34
P33
P32
P31
P30
P29
P28
P27
P26
P25
P24
P23
P22
P21
P20
P19
P18
P17
P16
P15
P14
P13
P12
P11
P10
F21
F22
9G
8G
7G
6G
5G
4G
P9
P8
P7
P6
P5
P4
P3
P2
P1
41
42
43
44
45
46
47
48
49
50
51
52
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1
2
5
6
7
8
9
NOTE
EX) 030- 3pF 330- 33pF 331- 330pF 333- 0.033uF
R7001
ALL RESISTORS ARE IN OHMS 1/4WATTS UNLESS OTHERWISE NOTED. 100K
2SC2458
EX) PRINTING SIDE
Q7004
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9
SEG10
SEG11
SEG12
SEG13
SEG14
SEG15
SEG16
SEG17
SEG18
2 49
50
51
SEG1
SEG2
SEG19 SEG20
32
31
30
SEG0 SEG21
52 29
VCC2 SEG22
53 28
DIG15/SEG39 SEG23
54 27
DIG14/SEG38 SEG24
<Note> 55
DIG13/SEG37 SEG25
26
56 25
SD-x:XY is short for Shcematic Diagram-x and 57
DIG12/SEG36 Q7003 SEG26
24
DIG11 VP
each socket's location, X=A to H, Y=1 to 5. 58
DIG10 M66005 SEG27
23
59 22
DIG9 SEG28
60 21
DIG8 SEG29
61 20
DIG7 SEG30
SEG35 SEG34
62 19
DIG6 SEG31
63 18
DIG5 SEG32
_RESET
64 DIG4 17
SDATA
SEG33
DIG03
DIG02
DIG01
DIG00
XOUT
VCC1
SCK
VSS
_CS
XIN
P1
P0
C7001
223Z
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
+5V
R7006
27K
100/6.3
C7009
C7008
C7007
104J
101J
+
C7002 104J 3.3K R7002 FLDRST
C7003 101J 3.3K R7003 FLDCS
C7004 101J 220 R7004 FLDCLK
NADIS-8786 C7005 101J 220 R7005 FLDSDO
U02 SWITCH PC BOARD

3 DTA114ES
Q7006
DTA114ES
R7151
Q7151
SDPB3DD0C
2.2K
R7154
SLR-342MGTE7P
VOLUME
180
SLI-343URC
SDPB3DD0C
PURE AUDIO
D7001
D7152
EXCEPT
ZONE2
D7154
D7155
STBY
DD/DC
R7010
120
DTC114ES
Q7152
R7152
120
LEDSTBY 8 8 LEDSTBY
LEDZONE2 7 7 LEDZONE2
GNDLED 6 6 GNDCPU
+BLED 5 5 +BLED
LEDPURE 4 4 LEDPURE
KEY0_2 3 3 KEY0_2 R7103
KEYINT0 2 2 KEYINT0 560
R7104 R7105 R7106 1 1
820 1.2K 2.2K
JL7101A
JL7101B
ZONE 2 OFF
PURE AUDIO
ZONE 2
EXCEPT
S7108
S7114
S7110
S7112
DD/DC
STBY
R7101
330
4 KEY0
LEVEL >
S7102
MULTI
ZONE 2
KEY1 R710
NAETC-8790 330
TUNER
S7116
U06
CD
HEADPHONE
JL6605A
PC BOARD
R7115
TO NAVD-8819
KEY2 330
P7201 5
(SD-5:A1)
5 4
MEMORY
DIGITAL IN
S7132
4 022M 3
2 L7201 2
HEADPHONES 3 1
7 L7202
102J
8
1 022M
C7201
102J
L7203
C7203
C7204
102J
5 022M
R7123
330
KEY3
PRESET UP
E7201
TUN UP
S7150

TX-SR604/604E/8460
E F G H
REMIN 36
F11
F12
6G
5G
4G
3G
2G
1G
FLDRST 35
51
52
53
54
55
58
59
FLDCS 34
FLDCLK 33
FLDSDO 32
R7022
KEY0 31
KEY1 30
10K
R7021
223Z C7011 10K R7023 KEY2 29
C7010 223Z 10K KEY3 28
TO NADG-8816 (SD-6:B1)
C7012
223Z R7024 10K +5.6S 27
R7007 223Z KEYINT0 26
220 C7014 FAC1 25
R7008 MASTER VOLUME KEYINT1 24
C7015
100/16
220 ROTARY FAC2 23

ENCODER -VP 22
+ VOLA 21
S7002
+5VDIS 20
MTZJ8.2C
D7002
C7013
C7021 103Z
C7022 103Z
1
33/50 VOLB 19
4 5 18
GNDCPU 17
V4_R 16
2
GNDV4 15
V4_L 14
LEDSTBY 13
V4V 12
L7032 GNDV4V 11
022M V4Y 10
L7031 LEDZONE2 9
022M V4C 8
GNDMIC 7
-12V 6
+12V 5
MICOUT 4
P701B
MICDET 3
MICMUT 2
OPTF 1
NAETC-8789
U05 FRONT OPT
C7045 +5.6V
R7045 100/6.3 PC BOARD
4
5
100
3
+
2 R7351
IN U7351
C7047
1
102K
3 3
2 2 L7351 220
VCC
VIDEO-4
U7042
+
1 1
R7046
1K
022M
GND
DIGITAL
JL7351B
C7351
100/16
C7352
JL7351A
REMOTE CONTROLLER 223Z TORX177L

SENSOR
C7304
C7303 104Z
104Z
E7301
R7303
C7301 C7302
471J 471J 75 R7304
R7302
R7301
75
330
330
P7301
R L
VIDEO 4 INPUT
DTC114TS
R7101 R7102
330
Q7404
470
R7410
220
LEVEL <
LEVEL >
DTA114ES
S7104
S7106
ZONE 2
ZONE 2
Q7005
DTC114TS
R7411
Q7403
470
Q7007
DTC114ES
R7401
100
+R7409
R7406 330
220
33K MTZJ6.8B
4.7K
R7403
5 P7401
47/16
101J
R7107 R7108 R7109 R7110 R7111 R7112 R7113 C7401

C7404 C7405
Q7401
D7411
C7411 47/16
4
330J 10/16
10/16
4
5 + L7401 2
330 470 560 820 1.2K 2.2K 3.9K
7 022M 3
R7407
R7404
VIDEO4
VIDEO3
VIDEO2
VIDEO1
1K
TUNER
S7118
S7122
S7124
S7126
S7128
S7130
S7120
SETUP MIC
TAPE
D7401
6 7
R7408
220
47K
DVD
R7402
R7412
8
47K
470
1
NJM4580D-D L7402
C7421
C7403
C7402
102J
022M
R7405
R7413
MTZJ5.1B
220K
D7412
C7412
47/16
+
R7115 R7116 R7117 R7118 R7119 R7120 R7121 R7122

330 470 560 820 1.2K 2.2K 3.9K 12K NJM4580D-D
3
MTZJ6.8C
100K
Q7401
R7414
1
LIS MODE<
LIS MODE>
DIGITAL IN
TONE +
2
S7142
S7140
STEREO
TONE -
S7134
S7144
S7146
S7148
S7138
DISPLAY
TONE
S7136
R7123 R7124 R7125 R7126 R7127 R7128 R7129 R7130

330 470 560 820 1.2K 2.2K 3.9K 12K
PRESET UP
TUN DOWN
TUN MODE
RETURN
DIMMER
PRESET
SETUP
ENTER
S7158
S7160
S7162
S7164
S7166
S7152
S7154
S7156
DOWN

TX-SR604/604E/8460
A B C D
POWER SUPPLY SECTION
NAPS-8787
PP, GQ
RL901
F901
U03 POWER SUPPLY PC BOARD
4 1 1 D933
2
1 T5AL250V
1SS133
C901
P911
103M/275VAC D935
1SS133
4.7/50
C933
F903
T2.5AL250V
P902
AC OUTLET
100W MAX
PA D930 1SS133
RL901
F901
4 1 1 T902 D931
2 NPT-1519*
T5AL250V 1SS133
C901 1 9
2
P911
2 8 D923
103M/275VAC 1SS133
C921
3 7
223Z
4 6 D921
1SS133
F903 5
D924
T2.5AL250V 1SS133
P902 D922
AC OUTLET 1SS133
100W MAX
5
D925
GR RL901
1SS133
F901
4 1 1 C902
2 104J
T5AL250V
C901
P911
3 2
3 103M/275VAC
F903 AC CORD RL901

1 4 1
T2.5AL250V 2
P902
P901A
C901
AC OUTLET
100W MAX 103M/275VAC
F903
GK
NAETC-8793 5A 125V
RL901
F901
P941A
P941B
P945
4 1 1 N
AC OUTLET 2
T5AL250V U
100W MAX C901
P911
4 103M/275VAC
P902
U07 AC OUTLET
P942A
P942B
F903 100W MAX

OUTLET TERMINAL
PC BOARD T2.5AL250V
TYPE AC
WT, WO D 120V 60HZ
RL901
F901
4 1 1 P 230-240V 50HZ
T5AL250V 2 G 220-230V 50/60HZ
C901 W 120V/220-240V 50/60HZ
P911
103M/275VAC
5 POWER TRANSFORMER
TYPE T901 T902
F903 D NPT-1518D NPT-1519JQ
P NPT-1518P NPT-1519GQ
T2.5AL250V G NPT-1518G NPT-1519GQ
P902 W NPT-1518DQ NPT-1519JQ
AC OUTLET P923A P924A P925A
100W MAX

TX-SR604/604E/8460
E F G H
NOTE
JL901A
MTZJ5.1B ALL DIODES ARE EQUIVALENT TO 1SS133 UNLESS OTHERWISE NOTED.
D934
POFF 5 ELECTROLYTIC CAPACITORS ( ) ARE IN uF/WV.
TO NAVD-8819
+12VD 4 ALL CAPACITORS ARE IN pF/50WV UNLESS OTHERWISE NOTED.
(SD-5:A5)
EX) 030- 3pF 330- 33pF 331- 330pF 333- 0.033uF
100K
R934
MPUGND 3
J931 +10VS 2 THE THICK LINES ON PC BOARD ARE THE PRINTING SIDE OF THE PARTS.
EXCEPT W-TYPE POWERD 1 EX) PRINTING SIDE
C911 102J
D912
1SS133
1SS133
D911
<Note>
ONLY W-TYPE SD-x:XY is short for Shcematic Diagram-x and
Q930 each socket's location, X=A to H, Y=1 to 5.
SI-3010KF
GND
Vout
J932
ADJ
133
Vin
Vc
E901 TO NAVD-8819
R930
100K
100/35
1
2
3
4
5
(SD-5:A5) JL9101A
C930
+
R932
82K
NAETC-8788
1
2
3
4
5
6
U04
100/16
FLAC1
FLAC2
SEC3_1
SEC3_2
SEC2_1
SEC2_2
C932
10/50
R931
C931
100K
R933
POWER TRANS
10K
C922 SEC TERMINAL-1

+
2200/16
T901 PC BOARD
R9102
8
5.6 (1/2W)
C9101
104J
S4
R921 9
56(1/2W) EXCEPT W-TYPE

10
S3
11
1
12
13
01
F901 S2
1 1
F910
2 2 3 14
10A 125V
5A 125V
P911
TO NAPS-8912, P15-P19
S1
(SD-2:A5)
CAUTION
FOR CONTINUED PROTECTION
NASW-8794 W-TYPE ONLY AGAINST FIRE HAZARD, REPLACE
ONLY WITH FUSE OF SAME TYPE
U08 PRI SWITCH PC BOARD V A AND RATING INDICATED.
ATTENTION
P923B P924B P925B 1 T901 CAUTIONF AFIN D'ASSURER UNE PROTECTION
W-TYPE ONLY
PERMANENTE CONTRE LES RISQUES
D'INCENDIE, REMPLACER UNIQUEMENT
F902
PAR UN FUSIBLE DE MEME TYPE
V A
P912
T5AL250V 2 ET CALIBRATION COMME INDIQUE.
220V 1 1
4 1 2 2
3 3 3
5 2 4 4 THIS SYMBOL LOCATED NEAR THE FUSE INDICATES
5 5 4 THAT THE FUSE USED IS SLOW OPERATING TYPE
S902 6 3 FOR CONTINUED PROTECTION AGAINST FIRE FUSE
HAZARD,REPLACE WITH SAME TYPE FUSE. FOR FUSE
120V 5 RATING REFER TO THE MAKING ADJACENT TO THE SYMBOL.
CE SYMBOLE INDIQUE QUE LE FUSIBLE UTLISE EST

A LENT, E POUR UNE PROTECTION PERMANENTE,N'UTILISER
QUE DES FUSIBLES DE MEME TYPE. CE DARNIER EST
INDIQUE LA QU LE PRESENT SYMBOL EST APPOSE.

TX-SR604/604E/8460
A B C D
HDMI SECTION
NAVD-8928
TO NAVD-8819 (SD-5:G3)
U21 HDMI PC BOARD JL8001B
TO NAVD-8816, P801A (SD-6:D
1
1
2
3
4
18
VDRST 17
VD_SI 16
TXMUTE 15
VD_SCK 14
RXMUTE 13
VD_STB 12
VD_SO 11
HDMISPF 10
9
8
PCMLR 7
PCMBCK 6
PCMLRCK 5
GNDS2
+12DG
+12DG
GND
GND
GND
+3.3V
+3_3VHD1
Q8593
L8592
R8539 SCLDDC1
SI-8008
SDADDC1
PRODDC1
+3_3VHD1
R0PWR5V
R1HPR
CEC +12.0V NCH-2541 470K +5.0V

L8591 1 2
VIN SW
Q8510
BLM21PG221SN1
5 4
DTA144EE
SS VADJ
470/16
C8586
R8591
R8592
470/16
C8585
C8588
4.7K
47K
223Z
R8540
+
GND
0
CRS09
D8591
3
UM6K1N
BA33BCOFP
C8587
104Z
Q8504
R8593
820
R8536 10K
UM6K1N
Q8505
3.3K 3.3K
2 R8546
R8547
R8542
3.3K
R8543
10K 3.3K
256*8 EEPROM
R8535
BR24L02FV-W
HDM_BLNK
HDM_VSYNC
HDM_HSYNC
104Z C8581
8
7
6
5
DSCL0
DSCL1
R0PWR5V
R1PWR5V
DSDA0
DSDA1
SCL_RX
SDA_RX
WP
SCL
GND SDA
VCC
R8534
R8545
Q8506
10K
1SS226
1K
D8501
A0
A1
A2
BLM
C8517 105Z
C8505 105Z
C8504 102J
1
2
3
4
DVCC
C8515 102J
C8514 105Z
R8503 33
R8502 33
R8501 33
R8538 R8541 BLM
10K 10K C8599 DSCL0
C8518
C8516
C8502
C8513
C8511
22/4
105Z
102J
22/4
102J
22
20
102J DSDA0 B
19
PVCC
Shield
HP DET
18 C8501
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
+5V C8519 102J 22/4
9
8
7
6
5
4
3
2
1
17
IOGND
IOGND
IOGND
IOVCC
IOVCC
IOVCC
DL3
DL2
DL1
DL0
CGND
CGND
CGND
DR3
DR2
DR1
DR0
NC
NC
NC
DE
DSCL0
DSCL1
CSCL
VPP3318
DCLK
R0PWR5V
R1PWR5V
DSDA0
DSDA1
CSDA
EVNODD
CVCC18
CVCC18
VSYNC
HSYNC
GND
16 C8520
IOVCC
DDC DATA Q8503
22/4 145
15 UM6K1N ePAD
DDC CLK C8521 37 144
14 PVCC0 Q0
NC 102J 38 143
13 CEC R8567 AVCC Q1
CERemote 39 142
12 R0XCN R0XC- Q2
HDMI IN1
CK- 0 40 141
11 R0XC+ Q3 33
CK Shield R8568 C8522 41 140 R8528
3 CK+
D0-
10
9
R0XCP
R0X0P
0
R8569
102J 42
43
AGND
AVCC
Q4
CVCC18
139
138
8 R0X0- CGND
D0 Shield 0 102J 44 137 C8561
7 R0X0N R0X0+ Q5
D0+ R8570 C8523 45 136 102J
6 R0X1N 0 AGND Q6
D1- C8524 46 135 105Z
5 AVCC IOGND
R8571
P8501
D1 Shield 47 134 C8560

4 R0X1P 105Z
R0X1- IOVCC
D1+ 0 48 133
3 R0X2N R0X1+ Q7
D2- R8572 C8525 49 132 C8559 10
2 AGND Q8
Shield
D2 Shield 0 102J 50 131

1 R0X2P R8573 AVCC Q9
D2+ 51 130
R0X2- Q10
21
23
C8598 102J 0 52 129

R1PWR5V R0X2+ Q11
R8574 53 128 R8526 3
AGND CVCC18
0
C8526 54 TMDSPGND
Q8501 CGND
127 C8558 10
+3_3VHD1
SDADDC2
102J 126
R8639 SCLDDC2
55
PRODDC2
R2HPR
PVCC1 Q12
C8527
56 RSVD_A
SII9033 Q13
125
102J 57 124
AVCC
HDMI Receiver Q14
DTA144EE
R8575 123
58 R1XC- Q15
R8640
0 122 R8525 33
59
R8636 10K Q8610
R1XC+ IOVCC
0
R8576 C8528 60 121 33 H

AGND ODCK
UM6K1N
0
Q8604
102J 61 120 R8524

UM6K1N
Q8605
R8577
AVCC IOGND 10
3.3K R8642 62 119 C8556
3.3K C8529 R1X0- Q16
R8646 0 63 118
R1X0+ Q17
4 R8647
3.3K R8643
R8578
0
105Z
C8530
64
65
AGND
AVCC
Q18
Q19
117
116
10K 3.3K R8579 102J 33
66 115 R8523
R1X1- CGND
256*8 EEPROM
0 10
BR24L02FV-W
R8635 67 114 C8555

R1X1+ CVCC18 3
104Z C8681 C8531 113 R8522
R8580 68
8
7
6
5
0 AGND Q20
SDA
WP
SCL
VCC
R8634
102J 69 112
10K
R8645
Q8606
AVCC Q21
1SS226
D8601
1K
R8581 111
70 R1X2- Q22
0
GND
71 110
AUDPVCC18
R1X2+ Q23
A0
A1
A2
C8532
AUDPGND
109
MUTEOUT
MCLKOUT
R8582 72
XTALOUT
XTALVCC
AGND IOVCC
REGVCC
0
CVCC18
CVCC18
CVCC18
CVCC18
1
2
3
4
RESET#
CLK48B
105Z
XTALIN
RSVDL
IOGND
IOGND
IOGND
IOVCC
IOVCC
CGND
SPDIF
CGND
CGND
CGND
SCDT
R8638 R8641
C8554 10
SCK
SD3
SD2
SD1
SD0
10K 10K C8699

WS
INT
NC
NC
NC
DSCL1
BLM21PG221
C8553 10
22
20
102J DSDA1
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
19 C8552 10
+3_3VPLL L8506
Shield
HP DET
18
C8551
C8538
C8539
C8540
C8541
C8548
R8521
C8549
R8517
33
C8589
C8550
+5V
105Z
4.7K
C8535 102J
105Z
102J
22/4
C8534 102J
C8533 105Z
22/4
17
R8508 33
R8509 33
33
GND
16 Q8603
DDC DATA B
R8511
R8514 C8537
UM6K1N
33X4
R8512
R8513
BK1608LL241
C8536
15 C8624
105Z
102J
102J
DDC CLK
102J
L8517
14 220/4
33 R8516
R8518
070D
R8520
C8542
C8543
105Z C8544
102J
070D
10K
102J C8545
105Z C8546
102J C8547
NC
22/4
100
100
HDMI IN2
13 CEC C8623 105Z

XC6213B332M
CERemote
SCDT R8519
100
4
5
12 R1XCN
47
VIN VOUT
NC
CK-
MCK_HDMI
Q8602
PCMLRCK
11
PCMSBLR
PCMCSW
HDMISPF
MUTERX
PCMBCK
CK Shield
PCMSLR
RST_RX
28.332MHz X8501
INT_RX
PCMLR
10 R1XCP
CK+
VSS
5 9 R1X0N
CE
R8515
D0- 1M
8
1
2
3
D0 Shield
7 R1X0P
D0+
6 R1X1N R8633 1K
D1-
5 C8622
P8601
+5VHD
D1 Shield 105Z
4 R1X1P
D1+
3 R1X2N
D2-
2
Shield
D2 Shield
1 R1X2P
D2+
23
21
C8698
102J

TX-SR604/604E/8460
E F G H
FLASH MICOM WRITER

HS 8
FWFLMD0 7
+3.3VMPU 6
FSO
FSI
FCLK
TXMUTE
MUTERX
56 R8730 HPLGDET
PRODDC1
VD_SO
PRODDC2
INT_VD
VD_SCK
HS
VD_SI
FWRESET 5
PROEP2
PROEP1
-6:D3) P8003B FCLK 4
R8712-8715 FSO 3
R8715
R8714
R8713
R8729-8732 FSI 2
R8737
6
5
4
3
2
1
R8762
C8707
22X4
105Z
R8729
59 R8736
58 R8732
R8761
PCMSBLR
R8736,R8761
57 R8731
PCMLRCK
22
PCMCSW
MCK_HDMI
1
PCMBCK
PCMSLR
22
74 DB3
73 DB2
72 DB1
71 DB0
C8710
105Z
P8702
70
69
68
67
66
65
64
63
62
61
60
55
54
53
52
51
75
PCM0/_WAIT
P911/SOB3
P910/SIB3
P98/SOB1
PCT0/_WRO
P915/INTP6
P914/INTP5
P913/INTP4
PCT1/_WR1
PCM3/_HLDRQ
PCM1/CLKOUT
PDL1/AD1
PDL0/AD0
BVSS
PHD3/A19
PDH12/A18
BVDD
PCT4/_RD
P99/SCKB1
PCT6/ASTB
PCM2/_HLDAK
P912/_SCKB3
PDL4/AD4
PDL3/AD3
PDL2/AD2
CEC_IO
R8738 76 50
77
R8728
10KX4
47K 49
78 PDL5/FLMD1 P97/SIB1
R8739-R8742 PDL6/AD6 P96/A6 48 22
R8746-R8756 79 PDL7/AD7 P95/A5 47 R8705 VD_STB
PDL8/AD8 P94/A4
22 80 46 2.2K SCL_TX
PDL9/AD9 P93/A3
DVDA_ENH R8739 81 45 R8727 SDA_TX (P8703)
PDL10/AD10 P92/A2
22 82 PDL11/AD11 P91/SCL02 44 SCLDDC2 2 1
83 43 SDADDC2 4 3
PDL12/AD12 P90/SDA02
RXMUTE R8756 84 42 R8726 OC_DMS 6 5
+5VHD
PDL13/AD13 P55/DMS 2.2K

INT_VSYNC R8755 85 41 OC_DCK 8 7
PDL14/AD14 P54/DCK
RTC R8754 86 OC_DDO 10 9
HDMI_POW R8740 87
PDL15/AD15 Q8701 P53/DDO 40
OC_DDI 12 11
PDH0/A16 P52/DDI 39
C8591 C8593 C8595 R8741 88
105Z 105Z 105Z
DVIHDMI 38 SCL_VDVE 14 13
PDH1/A17 P51
MPD70F3716GC-8EA
BA33BCOFP
BA18BCOFP
BA18BCOFP
TEST0 R8752 89 37 R8734 SDA_VDVE 16 15

1
P711/ANI11 P50
Q8595
Q8592
Q8591
RST_RX R8747 90 SCLDDC1 18 17

I
36 2.2K
2 2 2 P710/ANI10 P39/SCL00
G G G R1HPR R8748 91 35 R8733 SDADDC1 20 19
P79/ANI9 P38/SDA00
O
R2HPR R8749 92 C8706 2.2K

P78/ANI8 EVDD 34
3
100/4 100/4 R8750 93 105Z

VDOFF 33
P77/ANI7 EVSS
C8592 C8594 C8596 RST_IP R8751 94 32
+1_8VHD3
P76/ANI6 P37 R8725

100/4 HPD_TX 95 2.2K SCL_RX
31
+3_3VHD1
P75/ANI5 P36
R8742 96 30 R8724 2.2K SDA_RX
R8753 97 P74/ANI4 P35
HDOE P34 29 R8723 2.2K SCL_IP
P73/ANI3 P33
(P8704)
RST_VE 98 P32/ASCKA0 28 R8722 2.2K SDA_IP 1
P72/ANI2
P31/RXDA0
PP40/SDA01
L8501
P05/INTP2/_
R8744 99 27 R8759 2
P41/SCL01
P71/ANI1
P30TXDA0
P04/INTP0
P04/INTP1
P06/INTP3
P10/ANO0
P11/ANO1
PDH4/A20
PDH5/A21
BLM21PG221 22
RST_VD 100 26 DBGRXD 3
AVREF1
P02/NMI
P70/ANI0
RESET
FLMD0
AVSS0
L8502 R8757 2.2K

REGC
R8746 4
VDD0
VSS0
BLM21PG221 100K
XT1
XT2
P42
+3.3VMPU 5
X1
X2
L8504 100K AVREF0

R8758 R8760 6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
BLM21PG221
+3_3VHD1 L8701 220M 2.2K DBGTXD 7
Debug
L8505
MODE0
MODE1
1 GND 8
C8708
C8709
C8701
C8702
C8704
R8707
RST_TX 22 R8719
INT_TX 22 R8720
INT_RX 22 R8721
R8710
R8711
SDAODDC R8709
C8703
4.7/50
R8712
R8706
C8705
220/4
105Z
105Z
105Z
2.2K
2.2K
BLM21PG221
22
9
CVCC18
IOVCC
SCLODDC
10K
X8701
105Z
SCDT
R8704
105Z
R8702
10K
1SS355 10K
HDM_CB2
4.7K
4.7K
D8701
R8708
HDM_CB3
0
VDRST
HDM_CB4
R8716 22
HDM_CB5
X8701 R8717 0
8 33X4 CSTCR5M00G53-B0
C8562 R8718 0 OC_FLMDO
105Z
OC_SYSRST
1
102J SDA_TX
R8417 22X4 R8416 22X4 Q8404

R8413 4.7k RST_TX
XC6213B332M
HDM_Y8
HDM_Y9
HDM_CR2
HDM_CR3
HDM_CR4
HDM_CR5
HDM_CR6
HDM_CR7
HDM_CR8
HDM_CR9
HDM_Y7
SCL_TX
R8415 4.7k
HDM_CB6 +5VHD 1 5
R8414 4.7k
C8422
C8419
VIN VOUT
105Z
0
C8423
C8421
C8420
R8527 HDM_CB7
C8451
C8453
105Z
220/4
102J
2
105Z
22x4
33X4 VSS
R8411 4.7k
HDM_CB8 3
C8452
1K
4
105Z
9 102J HDM_Y2 CE NC
HDM_CB9
R8452
R8418
HDM_Y3
102J
HDM_Y4 BLM21PG221
BLM21PG221
HDM_Y5 +3_3VHD1
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
L8404
L8405
R8462
6 33X4
27K
IOGND
IOVCC
D14
D15
D16
D17
D18
D19
D20
D21
D22
D23
CGND
CGND
CI2CA
CSCL
CSDA
CVCC18
CVCC18
RESET#
FOR NAVD8824
C8461
8 102J
105Z
C8418
C8428 050C
HDM_Y6
R8421 61 40 22/4
HDM_Y7 D13 NC C8398
HDM_Y6 22X4 62 39 C8417 105Z CEC_IO 102J
HDM_Y8 D12 PGND2
HDM_Y5 63 38 C8416 102J
23
21
HDM_Y9 D11 PVCC2 DLP2ADN900HL4L TX2+

HDM_Y4 64 37 C8415 1
Shield
5 33X4 D10 AGND L8407 D2+

HDM_Y3 100D 65 36 102J 1 8 2
HDM_PIXCLK D9 TX2+ D2 Shield
HDM_PIXCLK 66 35 2 7 TX2- 3
4 IDCK TX2- D2-
102J HDM_Y2 R8422 C8428 67 34 3 6 TX1+ 4
6 HDM_CR2 D8 AVCC D1+
HDM_CR3
HDM_CB9 22 68
D7 Q8401 TX1+
33 4 5 5
D1 Shield
HDM_CB8 69 32 TX1- 6
HDM_CR4 D6 TX1- D1-
HDM_CR5
HDM_CB7 70
D5 SII9030 AGND
31 C8414 L8406 TX0+ 7
D0+
HDMI OUT
22X4 R8423 71 30 105Z 1 8 8

3 33X4
5 102J
C8424 105Z 72
IOVCC
IOGND
HDMI Transmitter TX0+
TX0-
29 2 7 TX0- 9
D0 Shield
D0-
C8425 102J
P8302
33X4 73 28 3 6 TXC+ 10
2 HDM_CR6 CGND AVCC CK+
C8426 105Z 74 27 C8413 4 5 11
HDM_CR7 C8427 CVCC18 TXC+ CK Shield
HDM_CB6 102J 75 26 102J DLP2ADN900HL4L TXC- 12
HDM_CR8 D4 TXC- CK-
HDM_CB5 76 25 C8412 D8461 1SS226 13
HDM_CR9 D3 AGND 105Z CERemote
HDM_CB4 77 24 R8410 CEC 14
D2 EXT_SWING 560 UM6K1N C8332 NC
HDM_CB3 78 23 SCLODDC 15
+1_8VHD2
D1 PVCC1 R8334 105Z

DDC CLK
HDM_CB2 R8424 79 22 16
4 105Z D0 PGND1 102J 4.7K DDC DATA
Q8309
HDM_BLNK 22 R8425 80 21 C8411 R8337 2.2K 17

3 102J DE RSVDL GND
CVCC18
CVCC18
R8426 81 R8427 4.7K SDAODDC R8335 18

HSYNC
Shield
R8424
VSYNC
IOGND
IOVCC
CGND
SPDIF
CGND
2 105Z ePAD +5V

MCLK
DSDA
22X4 22
DSCL
C8410 105Z 19
HPD
SCK
2.2K
SD3
SD2
SD1
SD0
TX_HPLG
WS
INT
HP DET
C8409 22/4 R8338 C8330
20
22
1
2
3
102J C8404 4
5
6
7
8
9
10
11
12
13
14
15
16
102J 17
18
R8409 22 19
20
4.7K 105Z
22/4 DVIHDMI
DTA144EE
C8408
Q8308
BLM21PG221 C8399
C8401
C8403
C8402
L8403
22
22/4
22/4
105Z
R8333 102J 100

102J
L8508 1K
R8407 22
R8341 +12DG
R8403 22
MCK_HDMI R8404 22
R8401 22
HDM_VSYNC R8402 22
BLM21PG221
R8408
BLM21PG221
5
BLM21PG221
VO
CONT VIN
NJM2860F3-05
C8328
L8507
22/16
C8405
C8406
C8407
R8405
R8406
L8401
22X4
L8402
Q8305
105Z
BLM21PG221
22
Q8306 +3_3VHD1
C8329
C8326
4.7K
105Z
L8509
105Z
R8324
TC7SZ08FU
GND
BLM21PG221
BYP
HDM_HSYNC
1SS226
D8301 1 5
PCMLRCK
PCMSBLR
+1.8V INA VCC

PCMCSW
HDMISPF
SDAODDC
SCLODDC
PCMBCK
PCMSLR
+1_8VHD3
105Z 3
2
R8323 1
C8327
2
PCMLR
HPD_TX
INB
INT_TX
10K
R8325
3 4 HPLGDET
47K
+3_3VHD1 GND OUTY HDMI_POW
+5.0V
<Note>

TX-SR604/604E/8460
A B C D
SCHEMATIC DIAGRAM-11
DIGITAL AUDIO WAVE FORM SECTION
NOTE:
1. WF01 is short for WaveForm01 .
2. See SD-6(SCHEMATIC DIAGRAM-6) for details.
1 TO NAVD-8928 (SD-10)
P801A WF09
3
4
7
2
5
6
DAC_OUT- R411
MCK_HDMI
FL
PCMSBLR
PCMLRCK
PCMCSW
PCMSLR
PCMBCK
Q401 WF10
PCMLR
TMS320D707E001 DAC_OUT+
WF06 R401 AUDIO_FL
Q201 R412
74HCU04F WF02 WF03 FR
Q131 DSP CX_SDIN1 1 Q401
138 113 DAC 33
R254 32 R402
137 CX_SDIN2 64
COAX1 43 115 30
COAX1 1 4
R336
DIR 135
116
CX_SDIN3 R255
63 31 R413
R256 62 37 C
COAX2 42 14 12 SAI_SDOUT 117
CX_SDIN4
36 R403 Q402
COAX2 13 10
R337
54 SAI_SDOUT 13 120 R257 29
R312 11 9 SAI_SLCK CX_SCLK 2 28
61 SAI_SLCK 10 139 R415
142 26
R267
27 SL
TX 50
R316 5
7 SAI_LRCK CX_LRCK 3 R405 Q403
IN 60 SAI_LRCK 6 141 144 23
9 6 R269 22
DIGITAL VCC
R315
20
R416
OUT OPT1 46
WF04 WF05 Q181 WF07 21
SR
GND 34 R406 Q403
OPT2 45
TC74VHC157FT WF08 35
IN
R141 R417
48 SBL
OPT1 VCC
OPT3
R407 Q404
WF01
2 GND
MASTER CLOCK=128Fs or 256Fs
R418
IN
Q301 CS42518-CQ SBR
R142 R408 Q404
OPT2 VCC
GND R414
SW
IN R404 Q402
R143 LR CLOCK (SAI_LRCK, CX_LRCK) BIT CLOCK (SAI_SLCK, CX_SLCK)
64Fs=3072kHz : DVD, Clock width=325ns
OPT3 VCC Fs=48kHz : DVD, Clock width=20.8us
Fs=44.1kHz : CD, Clock width=22.7us 64Fs=2822.4kHz : CD, Clock width=354ns
GND
WF01 OPT1 WF02 COAX1 WF03 SAI_SDOUT
4.0V 5.0V 3.3V
Duty varies according to audio data Duty always varies according to audio data Duty varies according to audio data
WF04 SAI_LRCK WF05 SAI_SLCK WF06 CX_SDIN1
3.3V 3.3V 3.3V
20.8us 325 ns 20.8us

4
WF07 CX_LRCK WF08 CX_SCLK WF09 DAC_OUT-
3.3V 3.3V 2.8V
0V
Analog audio wave form with aliasing noise
20.8us 325 ns
WF10 AUDIO_FL WF10 AUDIO_FL
5
2.8V 220mVp-p
0V
Analog audio wave form with aliasing noise Aliasing noise in no audio data

TX-SR604/604E/8640
A B C D
PRINTED CIRCUIT BOARD VIEWS-1
(NADIS-8785)
1 Component Side

TX-SR604/604E/8640
E F G H

TX-SR604/604E/8640
A B C D
(NADIS-8785)
1 Soldering Side

TX-SR604/604E/8640
E F G H

TX-SR604/604E/8640
A B C D
U02 SWITCH PC BOARD
(NADIS-8786)
1 Component Side
Soldering Side

TX-SR604/604E/8640
A B C D
U03 POWER SUPPLY PC BOARD
(NAPS-8787)
1 Component Side
U04 SEC. TERMINAL-1 PC BOARD

(NAETC-8788)
Component Side Soldering Side

TX-SR604/604E/8640
A B C D
U05 FRONT OPT PC BOARD

1 (NAETC-8789)
Component Side
U06 HEADPHONE JACK PC BOARD

(NAETC-8790)
Component Side
U07 OUTLET TERMINAL PC BOARD

(NAETC-8793)
Component Side

TX-SR604/604E/8640
E F G H
U08 PRI. SWITCH PC BOARD

(NASW-8794)
Component Side

TX-SR604/604E/8640
A B C D
U12 DSP PC BOARD

(NADG-8816)
1
Component Side

TX-SR604/604E/8640
E F G H

TX-SR604/604E/8640
A B C D
U12 DSP PC BOARD

(NADG-8816)
1
Soldering Side

TX-SR604/604E/8640
E F G H

TX-SR604/604E/8640
A B C D
U13 XM PC BOARD
(NADG-8817)
1 Component Side
Soldering Side

TX-SR604/604E/8640
A B C D
U14 VIDEO PC BOARD
(NAVD-8819)
1 Component Side

TX-SR604/604E/8640
E F G H

TX-SR604/604E/8640
A B C D
U14 VIDEO PC BOARD
(NAVD-8819)
1 Soldering Side

TX-SR604/604E/8640
E F G H

TX-SR604/604E/8640
A B C D
U15 AMPLIFIER PC BOARD
(NAAF-8911)
1 Component Side

TX-SR604/604E/8640
E F G H

TX-SR604/604E/8640
A B C D
U15 AMPLIFIER PC BOARD
(NAAF-8911)
1 Soldering Side

TX-SR604/604E/8640
E F G H

TX-SR604/604E/8640
A B C D
U16 SEC. TERMINAL-2 PC BOARD
(NAPS-8912)
1 Component Side Soldering Side
U17 THERMAL SENSOR PC BOARD

(NAETC-8913)
Component Side

TX-SR604/604E/8640
A B C D
U19 DRIVER AMPLIFIER PC BOARD
(NAAF-8917)
Component Side
1
U20 SPEAKER TERMINAL PC BOARD

(NAETC-8918)
Component Side
4

TX-SR604/604E/8640
E F G H

TX-SR604/604E/8640
A B C D

U21 HDMI PC BOARD
(NAVD-8928)
1
Component Side

TX-SR604/604E/8640
E F G H
Soldering Side

TX-SR604/604E/8460
MD-2000
IC BLOCK DIAGRAMS AND TERMINAL DESCRIPTIONS -1

Q4003: ADV7172 (Digital PAL/NTSC Video Encoder with six DACs)
BLOCK DIAGRAM
CLOCK PAL NTSC CLAMP SCLOCK SDATA ALSB
M
10 U 10 10-BIT
FIELD/ VIDEO TIMING I 2 C MPU PORT YUV TO DAC A
RBG L DAC
GENERATOR T
MATRIX
10 I 10
+ 10-BIT
YUV P DAC DAC B
LEVEL L
CONTROL 10 E 10 10-BIT
TTX TELETEXT BLOCK X DAC C
DAC
TTXREQ INSERTION BLOCK E
R
VAA BRIGHTNESS AND LUMA VREF
CONTRAST CONTROL PROGRAMMABLE DAC
10 CONTROL RSET2
+ FILTER M
ADD SYNC + BLOCK
8 Y 8 U COMP2
+ SHARPNESS L
INTERPOLATOR FILTER 10 10-BIT
P0 YCrCb T DAC E
4:2:2 TO 10 I DAC
4:4:4 8 TO U
COLOR SATURATION CONTROL 10 P
DATA INTER- YUV MODULATOR 10
MATRIX 8 + PROGRAMMABLE 10 L 10-BIT
POLATOR + E DAC DAC F
ADD BURST 10 CHROMA
P7 8 V + HUE X
8 FILTER CONTROL 10 10
INTERPOLATOR E 10-BIT
R DAC DAC D
10 10
REAL-TIME SIN/COS DAC
CONTROL CIRCUIT DDS BLOCK CONTROL RSET1
BLOCK
COMP1
SCRESET/RTC GND
PIN CONFIGURATION
SCRESET/RTC
PAL NTSC
TTXREQ
RESET
CLOCK
CLAMP
RSET1
VREF
GND
VSO
TTX
VAA
48 47 46 45 44 43 42 41 40 39 38 37
VAA 1 36 COMP1
PIN 1
P0 2 IDENTIFIER 35 DAC A
P1 3 34 VAA
P2 4 33 DAC B
P3 5 32 VAA
P4 6
ADV7172 31 GND
P5 7 30 VAA
P6 8 TOP VIEW 29 DAC C
P7 9 28 DAC D
CSO_HSO 10 27 VAA
VAA 11 26 GND
GND 12 25 DAC E
13 14 15 16 17 18 19 20 21 22 23 24
FIELD/VSYNC
COMP2
GND
HSYNC
RSET2
GND
BLANK
DAC F
SDATA
VAA
SCLOCK
ALSB

MD-2000
TX-SR604/604E/8460

Q4003: ADV7172 (Digital PAL/NTSC Video Encoder with six DACs)
TERMINAL DESCRIPTION
Mnemonic Input/Output Function
P7–P0 I 8-Bit 4:2:2 Multiplexed YCrCb Pixel Port (P7ÐP0) P0 represents the LSB.
CLOCK I TTL Clock Input. Requires a stable 27 MHz reference clock for standard operation. Alter-
natively, a 24.5454 MHz (NTSC) or 29.5 MHz (PAL) can be used for square pixel operation.
HSYNC I/O HSYNC (Modes 1 and 2) Control Signal. This pin may be configured to output (Master
Mode) or as an input and accept (Slave Mode) Sync signals.
FIELD/VSYNC I/O Dual Function FIELD (Mode 1) and VSYNC (Mode 2) Control Signal. This pin may be
configured to output (Master Mode) or as an input (Slave Mode) and accept these
control signals.
BLANK I/O Video Blanking Control Signal. The pixel inputs are ignored when this is Logic Level "0."
This signal is optional.
SCRESET/RTC I T his pin can be configured as an input by setting MR42 and MR41 of Mode Register 4. It
can be configured as a subcarrier reset pin, in which case a low-to-high transition on this
pin will reset the subcarrier phase to Field 0. Alternatively it may be configured as a Real-
Time Control (RTC) Input.
V REF I/O Voltage Reference Input for DACs or Voltage Reference Output (1.235 V).
RSET1 I A 150 resistor connected from this pin to GND is used to control full-scale amplitudes of
the Video Signals from DACs A, B, and C (the "large" DACs).
RSET2 I A 600 resistor connected from this pin to GND is used to control full-scale amplitudes of
the Video Signals from DACs D, E, and F (the "small" DACs).
COMP1 O Compensation Pin for DACs A, B, and C. Connect a 0.1 uF Capacitor from COMP to
V AA . For Optimum Dynamic Performance in Low Power Mode, the value of the
COMP1 capacitor can be lowered to as low as 2.2 nF.
COMP2 O Compensation Pin for DACs D, E, and F. Co nnect a 0.1 uF Capacitor from COMP to V AA .
DAC A O GREEN/Composite/Y Analog Output. This DAC is capable of providing 34.66 mA output.
DAC B O BLUE/S-Video Y/U Analog Output. This DAC is capable of providing 34.66 mA output.
DAC C O RED/S-Video C /V Analog Output. This DAC is capable of providing 34.66 mA output.
DAC D O GREEN/Composite/Y Analog Output. This DAC is capable of providing 8.66 mA output.
DAC E O BLUE/S-Video Y/U Analog Output. This DAC is capable of providing 8.66 mA output.
DAC F O RED/S-Video C/V Analog Output. This DAC is capable of providing 8.66 mA output.
SCLOCK I MPU Port Serial Interface Clock Input.
SDATA I/O MPU Port Serial Data Input/Output.
CLAMP O TTL Output Signal to external circuitry to enable clamping of all video signals.
PAL_NTSC I Input signal to select PAL or NTSC mode of operation, pin set to Logic "1" selects PAL.
VSO O VSO TTL Output Sync Signal.
CSO_HSO O D ual Function CSO or HSO TTL Output Sync Signal.
ALSB I TTL Address Input. This signal sets up the LSB of the MPU address.
RESET I T he input resets the on-chip timing generator and sets the ADV7172/ADV7173 into
default mode. This is NTSC operation, Timing Slave Mode 0, DACs A, B, and C powered
OFF, DACs D, E, and F powered ON, Composite and S-Video out.
TTX I T eletext Data Input Pin.
TTXREQ O T eletext Data Request output signal used to control teletext data transfer.
V AA P Power Supply (3 V to 5 V).
GND G Ground Pin.

TX-SR604/604E/8460
IC BLOCK DIAGRAM AND TERMINAL DESCRIPTIONS -3

Q4001: ADV7183
(Advanced Video Decoder with 10-Bit ADC and Component Input Support)
P15-P0
BLOCK DIAGRAM PIXEL
O/P POR T
ADV7183 RESAMPLING LUMA

SHAPING
PEAKING AND DELAY AFF
AND
ISO HPF/LPF HORIZONTAL BLOCK
NOTCH LPF SCALING
HFF/QCLK
REFOUT FIFO CONTROL
BLOCK
LUMA AEF
AIN1 10-BIT SYNC 2H LINE AND
ANTIALIAS PIXEL
ADC DETECTION MEMORY
LPF OUTPUT DV
AIN2 ANALOG I/P FORMATTER
MULTIPLEXING
AUTOMATIC RD
AIN3 SUB- RESAMPLING
GAIN CHROMA
CARRIER AND
CONTROL 27MHz COMB
RECOVERY HORIZONTAL OE
AIN4 (AGC) FILTER
DTO SCALING
CLAMP AND GL/CLKIN

AIN5
DC RESTRE
CHROMA
10-BIT SHAPING LLC LLC1
SWITCH ANTIALIAS
AIN6 ADC LPF SYNTHESIS
LPF
WITH LINE-
LOCKED LLC2
OUTPUT
CLOCK LLCREF
27MHz XTAL
VIDEO TIMING AND
OSCILLATOR I2 C-COMPATIBLE
CONTROL BLOCK INTERFACE PORT
BLOCK
ELPF
PWRDN HSYNC FIELD VSYNC HREF VREF CLOCK CLOCK RESET SDATA SCLOCK ALSB
PIN CONFIGURATION
RESET
DGND
FIELD
AIN12
DVDD
ALS B
SCLK
AIN6
SDA
P16
P17
P18
P19
OE
NC
NC
NC
NC
NC
NC
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
VS 1 60 AIN5
HS 2 59 AIN11
DGND 3 58 AIN4
DVDDIO 4 57 AIN10
P11 5 56 AGND
P10 6 55 CAP C2
P9 7 54 CAP C1
P8 8 53 AGND
DGND 9 52 CML
DVDD 10 ADV7183A 51 REFOUT
NC 11 TOP VIEW 50 AVDD
SFL 12 49 CAP Y2
NC 13 48 CAP Y1
DGND 14 47 AGND
DVDDIO 15 46 AIN3
NC 16 45 AIN9
NC 17 44 AIN2
NC 18 43 AIN8
P7 19 42 AIN1
P6 20 41 AIN7
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
P5
P4
P3
P2
P1
P0
NC
DVDD
DGND
NC
NC
PVDD
XTAL1
PWRDN
ELPF
XTAL
AGND
AGND
LLC2
LLC1

TX-SR604/604E/8460

Q4001: ADV7183
TERMINAL DESCRIPTION (1/2)

Pin Mnemonic Input/Output Function
1 VS/VACTIVE O VS or Vertical Sync. A dual-function pin, (OM_SEL[1:0] = 0, 0) is an
output signal that indicates a vertical sync with respect to the YUV pixel
data. The active period of this signal is six lines of video long. The polarity
of the VS signal is controlled by the PVS bit. VACTIVE (OM_SEL[1:0] =
1, 0 or 0, 1) is an output signal that is active during the active/viewable
period of a video field. The polarity of VACTIVE is controlled by PVS bit.
2 HS/HACTIVE O HS or Horizontal Sync. A dual-function pin, (OM_SEL[1:0] = 0, 0) is a
programmable horizontal sync output signal. The rising and falling edges
can be controlled by HSB[9:0] and HSE[9:0] in steps of 2 LLC1. The polarity
of the HS signal is controlled by the PHS bit. HACTIVE (OM_SEL[1:0]=
1, 0 or 0, 1) is an output signal that is active during the active/viewable
period of a video line. The active portion of a video line is programmable on
the ADV7183. The polarity of HACTIVE is controlled by PHS bit.
3, 14 DVSSIO G Digital I/O Ground
4, 15 DVDDIO P Digital I/O Supply Voltage (3.3 V)
5-8, 19-24, P15-P0 O Video Pixel Output Port. 8-bit multiplexed YCrCb pixel port (P15-P8),
32, 33, 73-76 16-bit YCrCb pixel port (P15-P8 = Y and P7-P0 = Cb,Cr).
9, 31, 71 DVSS1-3 G Ground for Digital Supply
10, 30, 72 DVDD1-3 P Digital Supply Voltage (3.3 V)
11 AFF O Almost Full Flag. A FIFO control signal indicating when the FIFO has
reached the almost full margin set by the user (use FFM[4:0]). The polarity
of this signal is controlled by the PFF bit.
12 HFF/QCLK/GL I/O Half Full Flag. A multifunction pin, (OM_SEL[1:0] = 1, 0) is a FIFO
control signal that indicates when the FIFO is half full. The QCLK
(OM_SEL[1:0] = 0, 1) pin function is a qualified pixel output clock when
using FIFO SCAPI mode. The GL (OM_SEL[1:0] = 0, 0) function
(Genlock output) is a signal that contains a serial stream of data that contains
information for locking the subcarrier frequency. The polarity of HFF signal
is controlled by PFF bit.
13 AEF O Almost Empty Flag. A FIFO control signal, it indicates when the FIFO
has reached the almost empty margin set by the user (use FFM[4:0]). The
polarity of this signal is controlled by PFF bit.
16 CLKIN I Asynchronous FIFO Clock. This asynchronous clock is used to output
data onto the P19-P0 bus and other control signals.
17, 18, 34, 35 GPO[3:0] O General-Purpose Outputs controlled via I 2 C
25 LLCREF O Clock Reference Output. This is a clock qualifier distributed by the inter-
nal CGC for a data rate of LLC2. The polarity of LLCREF is controlled
by the PLLCREF bit.
26 LLC2 O Line-Locked Clock System Output Clock/2 (13.5 MHz)
27 LLC1/PCLK O Line-Locked Clock System Output Clock. A dual-function pin (27 MHz 5%)
or a FIFO output clock ranging from 20 MHz to 35 MHz.
28 XTAL1 O Second terminal for crystal oscillator; not connected if external clock
source is used.
29 XTAL I Input terminal for 27MHz crystal oscillator or connection for external
oscillator with CMOS-compatible square wave clock signal
36 PWRDN I Power-Down Enable. A logical low will place part in a power-down status.
37 ELPF I This pin is used for the External Loop Filter that is required for the LLC PLL.
38 PVDD P
39 PVSS G

TX-SR604/604E/8460

Q4001: ADV7183
Pin Mnemonic Input/Output Function
40, 47, 53, 56, AVSS G Ground for Analog Supply
63
41, 43, 45, 57, AVSS1-6 G Analog Input Channels. Ground if single-ended mode is selected. These
59, 61 pins should be connected directly to REFOUT when differential mode is
selected.
42, 44, 46, 58, AIN1-6 I Video Analog Input Channels
60, 62
48, 49 CAPY1-2 I ADC Capacitor Network
50 AVDD P Analog Supply Voltage (5 V)
51 REFOUT O Internal Voltage Reference Output
52 CML O Common-Mode Level for ADC
54, 55 CAPC1-2 I ADC Capacitor Network
64 RESET I/O System Reset Input. Active Low.
65 ISO I Input Switch Over. A low to high transition on this input indicates to the
decoder core that the input video source has been changed externally and
configures the decoder to reacquire the new timing information of the new
source. This is useful in applications where external video muxes are used.
This input gives the advantage of faster locking to the external muxed
video sources. A low to high transition triggers this input.
66 ALSB I TTL Address Input. Selects the MPU address:
MPU address = 88h ALSB = 0, disables I 2 C filter
MPU address = 8Ah ALSB = 1, enables I 2 C filter
67 SDATA I/O MPU Port Serial Data Input/Output
68 SCLK I MPU Port Serial Interface Clock Input
69 VREF/VRESET O VREF or Vertical Reference Output Signal. Indicates start of next field.
VRESET or Vertical Reset Output is a signal that indicates the beginning
of a new field. In SCAPI/CAPI mode this signal is one clock wide and
active low relative to CLKIN. It immediately follows the HRESET pixel,
and indicates that the next active pixel is the first active pixel of the next field.
70 HREF/HRESET O HREF or Horizontal Reference Output Signal. A dual-function pin
(enabled when Line-Locked Interface is selected, OM_SEL[1:0] = 0,0),
this signal is used to indicate data on the YUV output. The positive slope
indicates the beginning of a new active line; HREF is always 720 Y samples
long. HRESET or Horizontal Reset Output (enabled when SCAPI or
CAPI is selected, OM_SEL[1:0] = 0, 1 or 1, 0) is a signal that indicates the
beginning of a new line of video. In SCAPI/CAPI this signal is one clock
cycle wide and is output relative to CLKIN. It immediately follows the last
active pixel of a line. The polarity is controlled via PHVR.
77 RD I Asynchronous FIFO Read Enable Signal. A logical high on this pin enables
a read from the output of the FIFO.
78 DV O DV or Data Valid Output Signal. In SCAPI/CAPI mode, DV performs to
functions, depending on whether SCAPI or CAPI is selected. It toggles
high when the FIFO has reached the AFF margin set by the user, and
remains high until the FIFO is empty. The alternative mode is where it can
be used to control FIFO reads for bursting information out of the FIFO. In
API mode DV indicates valid data in the FIFO, which includes both pixel
information and control codes. The polarity of this pin is controlled via PDV.
79 OE I Output Enable Controls Pixel Port Outputs. A logic high will three-state
P19-P0.
80 FIELD O ODD/EVEN Field Output Signal. An active state indicates that an even
field is being digitized. The polarity of this signal is controlled by the PF bit.

TX-SR604/604E/8460

Q2002: AK4384 (192kHz 24-Bit 2ch DAC )
BLOCK DIAGRAM PIN CONFIGURATION

P/S MCLK
VDD
VSS MCLK 1 16 DZFL
SMUTE/CSN De-emphasis Clock
µP Control Divider VCOM BICK 2 15 DZFR
ACKS/CCLK Interface
DIF0/CDTI SDTI 3 14 VDD
DZFL
DZFR LRCK 4 Top 13 VSS

View
8X SCF PDN 5 12 VCOM
ATT Modulator LPF AOUTL
LRCK Audio Interpolator
SMUTE/CSN 6 11 AOUTL
BICK Data
Interface ACKS/CCLK 7 10 AOUTR
SDTI 8X SCF
ATT Interpolator Modulator LPF AOUTR
DIF0/CDTI 8 9 P/S
PDN
No. Pin Name I/O Function
1 MCLK I Master Clock Input Pin
An external TTL clock should be input on this pin.
2 BICK I Audio Serial Data Clock Pin
3 SDTI I Audio Serial Data Input Pin
4 LRCK I L/R Clock Pin
5 PDN I Power -Down Mode Pin
When at “ L” , the AK4384 is i n the power-down mode and is held in reset.
The AK4384 should always be reset upon power- up.
6 SMUTE I Soft Mute Pin in parallel mode
“ H” : Enable,“ L” : Disable
CSN I Chip Select Pin in serial mode
7 ACKS I Auto Setting Mode Pin in parallel mode
“ L” : Manual Setting Mode, “ H” : Auto Setting Mode
CCLK I Control Data Clock Pin in serial mode
8 DIF0 I Audio Data Interface Format Pin in parallel mode
CDTI I Control Data Input Pin in serial mode
9 P/S I Parallel/Serial Select Pin (Internal pull -up pin)
“ L” : Serial control mode, “ H” : Parallel control mode
10 AOUTR O Rch Analog Output Pin
11 AOUTL O Lch Analog Output Pin
12 VCOM O Common Voltage Pin, VDD/2
Normally connected to VSS with a 0.1mF ceramic capacitor in parallel with
a 10 m F electrolytic cap.
13 VSS - Ground Pin
14 VDD - Power Supply Pin
15 DZFR O Rch Data Zero Input Detect Pin
16 DZFL O Lch Data Zero Input Detect Pin

TX-SR604/604E/8460

Q4002: AN15881A (Video SW for TV with Multi-signal 14 Inputs and 4 Outputs)
BLOCK DIAGRAM
V1
4/6dB Buf Vout1
V2
V3 75<E Vout2
V4 Vout2-FB
V5 75<E Vout3
V6 Vout3-FB
6dB
V7 75<E Vout4
V8 Vout4-FB
Y1
4/6dB Buf Yout1
Y2
Y3 75<E Yout2
Y4 Yout2-FB
Y5 75<E Yout3
Y6 Yout3-FB
6dB
Y7 75<E Yout4
Y8 Yout4-FB
C1
4/6dB Buf Cout4
C2
C3 75<E Cout1
C4
C5 75<E Cout2
C6
6dB
C7 75<E Cout3
C8
CY1 6dB
CY2
CY3 75<E CYout2
CY4 CYout2-FB
6dB
CY5 75<E CYout3
CY6 CYout3-FB
PB1 6dB
PB2
PB3 75<E PBout1
PB4
6dB
PB5 75<E PBout2
PB6
PR1
6dB
PR2
PR3 75<E PRout1
PR4
6dB
PR5 75<E PRout2
PR6
O1 O2 BIAS
SDA MUTE VCC GND

Logic
SCL

TX-SR604/604E/8460


Pin No. Pin name Type Description
1 Y3 In Luminance signal input 3
7 VCC1 Power supply 5.0V power supply
8 C1 In Chrominance signal input 1
13 GND1 Ground Ground
17 BIAS Output Bias voltage
18 CY1 In CY1 signal input
24 PB1 In PB1 signal input
30 PR1 In PR1 signal input

TX-SR604/604E/8460


36 MUTE In Mute control pin
37 PROUT2 Out PROUT2 signal output
38 O1 Out General output 1
39 PROUT1 Out PROUT1 signal output
40 O2 Out General output 2
41 PBOUT2 Out PBOUT2 signal output
42 PBOUT1 Out PBOUT1 signal output
44 CYOUT3-FB In CYOUT3 feedback input
45 CYOUT3 Out CYOUT3 signal output
46 CYOUT2-FB In CYOUT2 feedback input
47 CYOUT2 Out CYOUT2 signal output
48 COUT4 Out COUT4 signal output
54 YOUT4-FB In YOUT4 feedback input
55 YOUT4 Out YOUT4 signal output
62 VOUT4-FB In VOUT4 feedback input
63 VOUT4 Out VOUT4 signal output
64 SDA In I2C bus data input
70 SCL In I2C bus clock input

TX-SR604/604E/8460
IC BLOCK DIA GRAM AND TERMINAL DESCRIPTIONS -10


71 V1 In Video composite signal input 1
PIN CONFIGURATION
CYOUT3-FB
CYOUT2-FB
YOUT2-FB
YOUT3-FB
VOUT4-FB
YOUT4-FB
CYOUT2
CYOUT3
PBOUT1
PBOUT2
VOUT4
YOUT1
YOUT2
YOUT3
YOUT4
COUT4
COUT1
COUT2
COUT3
GND3
GND2
VCC3
VCC2
SDA
63
62
60
51
48
47
45
44
42
41
64
61
59
58
57
56
55
54
53
52
50
49
46
43
VOUT3-FB 65 40 O2
VOUT3 66 39 PROUT1
VOUT2-FB 67 38 O1
VOUT2 68 37 PROUT2
VOUT1 69 36 MUTE
SCL 70 35 PR6
V1 71 34 PR5
V2 72 33 PR4
V3 73
AN15881A 32 PR3
V4 74 31 PR2
V5 75 30 PR1
V6 76 29 PB6
V7 77 28 PB5
V8 78 27 PB4
Y1 79 26 PB3
Y2 80 25 PB2
10
13
14
17
18
20
21
23
24
11
12
15
16
19
22
2
6
1
BIAS
Y4
C2
C3
C5
GND1
C7
C8
CY2
CY3
CY4
CY5
CY6
PB1
Y3
Y5
Y6
Y7
Y8
VCC1
C1
C4
C6
CY1

TX-SR604/604E/8460

Q8506,Q8606: BR24L02FV-W(256X8 bit EEPROM)
BLOCK DIAGRAM AND PIN CONFIGURATION
A0 1 2k Bit EEPROM Array 8 Vcc
8bit 8bit
Address Slave word Data

A1 2
Decorder 8bit address register register 7 WP
START STOP
A2 3 6 SCL
Control circuit
ACK
GND 4 High-voltage Power voltage

5 SDA
generation circuit detection
Terminal I/O Function
Vcc - Apply a power source.
GND - Ground terminal
A0,A1,A2 I Slave address setting terminal
SCL I Serial clock input
SDA I/O Slave and word address.

Serial data input and output
WP I Write protect terminal

TX-SR604/604E/8460

Q301 : CS42518 (8-Ch Codec with S/PDIF Receiver)
BLOCK DIAGRAM
TXP VARX AGND LPFLT DGND DGND VD VD
RXP0
RXP1/GPO1 INT
RXP2/GPO2 C&U Bit RST
RXP3/GPO3 Data Buffer Control
AD0/CS
RXP4/GPO4 Clock/Data S/P DIF Port
Rx AD1/CDIN
RXP5/GPO5 Recovery Decoder
Format SDA/CDOUT
RXP6/GPO6 SCL/CCLK
RXP7/GPO7 Detector
GPO VLC
OMCK
MUTEC MUTE
Mult/Div RMCK
FILT+ Internal MCLK
VQ Ref Serial SAI_LRCK
REFGND DEM Audio SAI_SCLK
Interface
VA Port SAI_SDOUT
AGND
AINL+ VLS
ADC#1 Digital Filter Gain & Chip ADC
AINL- ADCIN1
Serial ADCIN2
AINR+ Data
AINR- ADC#2 Digital Filter Gain & Chip
CX_SDOUT
AOUTA1+ CX_LRCK
DAC#1
AOUTA1-
CX_SCLK
AOUTB1+ DAC#2 CX_SDIN1
AOUTB1-
CX_SDIN2
AOUTA2+
DAC#3 CODEC CX_SDIN3
AOUTA2-
Volume Control
Serial CX_SDIN4
Analog Filter
Digital Filter
AOUTB2+ DAC#4 Port

AOUTB2-
AOUTA3+ DAC#5
AOUTA3-
AOUTB3+ DAC#6
AOUTB3-
AOUTA4+ DAC#7
AOUTA4-
AOUTB4+ DAC#8
AOUTB4-

TX-SR604/604E/8460

PIN CONFIGURATION
SAI_SDOUT
CX_SDOUT
CX_SDIN2
CX_SDIN3
CX_SDIN4
SAI_LRCK
SAI_SCLK
ADCIN1
ADCIN2
OMCK
RMCK
DGND
RXPO
TXP
VLS
VD
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
CX_SDIN1 1 48 RXP1/GP01
CX_SCLK 2 47 RXP1/GP01
CX_LRCK 3 46 RXP1/GP01
VD 4 45 RXP1/GP01
DGND 5 44 RXP1/GP01
VLC 6 43 RXP1/GP01
SCL/CCLK 7 42 RXP1/GP01
SDA/CDOUT 8 41 VARX
CS42518
AD1/CDIN 9 40 AGND
AD0/CS 10 39 LPFLT
INT 11 38 MUTEC
RST 12 37 AOUTA1-
AINR- 13 36 AOUTA1+
AINR+ 14 35 AOUTB1+
AINL+ 15 34 AOUTB1-
AINL- 16 33 AOUTA2-
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
VQ
FILT+
REFGND
AOUTB4-
AOUTB4+
AOUTA4+
AOUTA4-
VA
AGND
AOUTB3-
AOUTB3+
AOUTA3+
AOUTA3-
AOUTB2-
AOUTB2+
AOUTA2+

Pin Name # Pin Description
CX_SDIN1 1 Codec Serial Audio Data Input (Input) - Input for two's complement serial audio data.
CX_SDIN2 64
CX_SDIN3 63
CX_SDIN4 62
CX_SCLK 2 CODEC Serial Clock (Input/Output) - Serial clock for the CODEC serial audio interface
CX_LRCK 3 CODEC Left Right Clock (Input/ Output) - Determines which channel, Left or Right, is currently active on
the CODEC serial audio data line.
VD 4 Digital Power (Input) - Positive power supply for the digital section.
51
DGND 5 Digital Ground (Input) - Ground reference. Should be connected to digital ground.
52
VLC 6 Control Port Power (Input) - Determines the required signal level for the control port.
SCL/CCLK 7 Serial Control Port Clock (Input) - Serial clock for the serial control port. Requires an external pull-up
resistor to the logic interface voltage in I2C mode as shown in the Typical Connection Diagram.
SDA/CDOUT 8 Serial Control Data (Input/Output) - SDA is a data I/O line in IC mode and requires an external pull-up
resistor to the logic interface voltage, as shown in the Typical connection Diagram. CDOUT is the output
data line for the control port interface in SPI mode.
AD1/CDIN 9 Address Bit 1 (I2C)/Serial Control Data (SPI) (Input) - AD1 a chip address pin in I2C mode; CDIN is
the input data line for control port interface in SPI mode.

TX-SR604/604E/8460


AD0/CS 10 Address Bit 0 (I2C)/Control Port Chip Select (SPI) (INput) - AD0 is a chip address pin in I2C mode; CS
is the chip select signal in SPI mode.
INT 11 Interrupt (Ountput) - The CS42518 will generate an interrupt condition as per the Interrupt Mask register.
RST 12 Reset (Input) - The device enters a low power mode and all internal registers are reset to their default
settings when low.
AINR- 13 Differential right Channel Analog Input (Input) - Signals are presented differentially to the delta-sigma
AINR+ 14 modulators via the AINR+/- pins.
AINL- 15 Differential right Channel Analog Input (Input) - Signals are presented differentially to the delta-sigma
AINL+ 16 modulators via the AINR+/- pins.
VQ 17 Quiescent Voltage (Output) - Filter connection for internal quiescent reference voltage.
FILT+ 18 Positive Voltage Reference (Output) - Positive reference voltage for the internal sampling circuits.
REFGND 19 Reference Ground (Input) - Ground reference for the internal sampling circuits.
AOUTA1 +, - 36, 37 Differential Analog Output (Output) - The full-scale differential analog output level is specified in the
AOUTB1 +, - 35, 34 Analog Characteristics specification table.
AOUTA2 +, - 32, 33
AOUTB2 +, - 31, 30
AOUTA3 +, - 28, 29
AOUTB3 +, - 27, 26
AOUTA4 +, - 22, 23
AOUTB4 +, - 21, 20
VA 24 Analog Power (Input) - Positive power supply for the analog section.
VARX 41
AGND 25 Analog Ground (Input) - Ground reference. Should be connected to analog ground.
40
MUTEC 38 Mute Control (Output) - The Mute Control pin outputs high impedance following an initial power -on con-
dition or whenever the PDN bit is set to a "1", forcing the codec into power -down mode. The signal will
remain in a high impedance state as long as the part is in power-down mode. The Mute Control pin goes
to the selected "active" state during reset, muting, or if the master clock to left/right clock frequency ratio
is incorrect. This pin is intended to be used as a control for external mute circuits to prevent the clicks
and pops that can occur in any single supply system. The use of external mute circuits are not manda-
toy but may be desired for designs requiring the absolute minimum in extraneous clicks and pops.
LPFLT 39 PLL Loop Filer (Output) - An RC network should be connected between this pin and ground.
RXP7/GPO7 42 S/PDIF Receiver Input/ General Purpose Output (Input/ Output) - Receiver inputs for S/PDIF encoded
RXP6/GPO6 43 data. The CS42518 has an internal 8:2 multiplexer to select the active receiver port, according to the
RXP5/GPO5 44 Receiver Mode Control 2 resister. These pins can also be configured as general purpose output pins,
RXP4/GPO4 45 ADC Overflow indicators or Mute Control outputs according to the RXP/General Purpose Pin Control
RXP3/GPO3 46 resisters.
RXP2/GPO2 47
RXP1/GPO1 48
RXP0 49 S/PDIF Receiver Input (Input) - Dedicated receiver input for S/PDIF encoded data.
TXP 50 S/PDIF Transmitter Output (Output) - S/PDIF encoded data output, mapped directly from one of the
receiver inputs as indicated by the Receiver Mode Control 2 resister.
VLP 53 Serial Port Interface Power (Input) - Determines the required signal level for the serial port interfaces.
SAI_SDOUT 54 Serial Audio Interface Serial Data Output (Output) - Output for two's complement serial audio PCM
data from the S/PDIF incoming stream. This pin can also be configured to transmit the output of the inter-
nal and external ADCs.
RMCK 55 Recovered Master Clock (Output) - Recovered master clock output from the External Clock Reference

TX-SR604/604E/8460


CL_SDOUT 56 CODEC Serial Data Output (Output) - Output for two's complement serial audio data the internal
and external ADCs.
ADCIN1 58 External ADC Serial Input (Input) - The CS42518 provides for up two external stereo analog to digital
ADCIN2 57 converter inputs to provide a maximum of six channels on serial data output line when the CS42518
is placed in One Line mode.
OMCK 59 External Reference Clock (Input) - External clock reference that must be within the ranges specified in
currently active on the serial audio data line.
SAI_LRCK 60 Serial Audio Interface Left/Right Clock (Input/Output) - Determines which channel, Left of Right, is
currently active on the serial audio data line.
SAI_LRCK 61 Serial Audio Interface Serial Clock (Input/Output) - Serial clock for the Serial Audio Interface

TX-SR604/604E/8460

Q282 : ES29LV400 (4 Mbit Flash Memory)
BLOCK DIAGRAM
RY/BY#
Vcc Vcc Detector Timer/

Counter DQ0-DQ15(A-1)
Vss
Analog Bias
Generator
Input/Output
Buffers
WE# Command Write
Register State
RESET# Machine
Data Latch/
Sense Amps
Sector Switches
Y-Decoder Y-Decoder
A<0:17> Address Latch
CE# X-Decoder Cell Array

Chip Enable
OE# Output Enable
Logic
BYTE#

TX-SR604/604E/8460

Q282 : ES29LV400 (4 Mbit Flash Memory)
PIN CONFIGURATION
A15 1 48 A16
A14 2 47 BYTE#
A13 3 46 Vss
A12 4 45 DQ15/A-1
A11 5 44 DQ7
A10 6 43 DQ14
A9 7 42 DQ6
A8 8 41 DQ13
NC 9 40 DQ5
NC 10 39 DQ12
WE# 11 ES29LV400 38 DQ4
RESET# 12 37 Vcc
NC 13 36 DQ11
NC 14 48-Pin Standard TSOP 35 DQ3
RY/BY# 15 34 DQ10
NC 16 33 DQ2
A17 17 32 DQ9
A7 18 31 DQ1
A6 19 30 DQ8
A5 20 29 DQ0
A4 21 28 OE#
A3 22 27 Vss
A2 23 26 CE#
A1 24 25 A0
Terminal Description
A0-A17 18 Addresses
DQ0-DQ14 15 Data Input s/Outputs
DQ15 (Data Input/Output, Word Mode)

DQ15/A-1
A-1 (LSB Address Input, Byte Mode)
CE# Chip Enable
OE# Output Enable

WE# Write Enable
RESET# Hardware Reset Pin, Active Low
BYTE# Selects 8-bit or 16-bit mode

RY/BY# Ready/Busy Output
3.0 volt-only single power supply

Vcc
(see Product Selector Guide for speed options and voltage supply tolerances)
Vss Device Ground
NC Pin Not Connected Internally

TX-SR604/604E/8460

Q2001 : F2602E (XM Digital Transceiver)
BLOCK DIAGRAM
PIN CONFIGURATION

TX-SR604/604E/8460


TX-SR604/604E/8460


TX-SR604/604E/8460

Q281: IC42S16100 (16-Mbit Synchronous Dynamic RAM)
BLOCK DIAGRAM
CLK
CKE
ROW DECODER
CS COMMAND
RAS DECODER MEMORY CELL
ROW
CAS & ARRAY
ADDRESS 2048
WE CLOCK
BUFFER
GENERATOR MODE 11 11 BANK 0
A11
1
REGISTER DQM
11 DATA IN
SENSE AMP I/O GATE
BUFFER
ADDRESS BUFFER
BURST COUNTER
ADDRESS LATCH
A10 256 16 16
COLUMN
COLUMN
8
A9 REFRESH SELF COLUMN DECODER I/O 0-15
A8 CONTROLLER REFRESH 8
A7 CONTROLLER 256
A6 DATA OUT
REFRESH SENSE AMP I/O GATE
A5 BUFFER
COUNTER
A4 16 16
ROW DECODER
A3
MEMORY CELL
MULTIPLEXER
A2 Vcc/VccQ
ARRAY
A1 ROW 2048
GND/GNDQ
A0 ADDRESS BANK 1
ROW BUFFER
ADDRESS 11 11
LATCH
11
PIN CONFIGURATION
VCC 1 50 GND
I/O0 2 49 I/O15
I/O1 3 48 I/O14
GNDQ 4 47 GNDQ
I/O2 5 46 I/O13
I/O3 6 45 I/O12
VCCQ 7 44 VCCQ
I/O4 8 43 I/O11
I/O5 9 42 I/O10
GNDQ 10 41 GNDQ
I/O6 11 40 I/O9
I/O7 12 39 I/O8
VCCQ 13 38 VCCQ
LDQM 14 37 NC
WE 15 36 UDQM
CAS 16 35 CLK
RAS 17 34 CKE
CS 18 33 NC
A11 19 32 A9
A10 20 31 A8
A0 21 30 A7
A1 22 29 A6
A2 23 28 A5
A3 24 27 A4
VCC 25 26 GND

TX-SR604/604E/8460

Q281: IC42S16100 (16-Mbit Synchronous Dynamic RAM)
Pin No. Pin name Function
20 to 24 A0-A10 A0 to A10 are address inputs. A0-A10 are used as row address inputs during active command input
27 to 32 and A0-A7 as column address inputs during read or write command input. A10 is also used to
determine the precharge mode during other commands. If A10 is LOW during precharge command,
the bank selected by A11 is precharged, but if A10 is HIGH, both banks will be precharged.
When A10 is HIGH in read or write command cycle, the precharge starts automatically after
the burst access.
These signals become part of the OP CODE during mode register set command input.
19 A11 A11 is the bank selection signal. When A11 is LOW, bank 0 is selected and when high, bank 1 is
selected. This signal becomes part of the OP CODE during mode register set command input.
16 CAS CAS, in conjunction with the RAS and WE, forms the device command. See the "Command Truth
Table" item for details on device commands.
34 CKE The CKE input determines whether the CLK input is enabled within the device.
When is CKE HIGH, the next rising edge of the CLK signal will be valid, and when LOW, invalid.
When CKE is LOW, the device will be in either the power-down mode, the clock suspend mode,
or the self refresh mode. The CKE is an asynchronous input.
35 CLK CLK is the master clock input for this device. Except for CKE, all inputs to this device are acquired
in synchronization with the rising edge of this pin.
18 CS The CS input determines whether command input is enabled within the device.
Command input is enabled when CS is LOW, and disabled with CS is HIGH. The device remains in
the previous state when CS is HIGH.
2, 3, 5, 6, 8, 9, I/O0 I/O0 to I/O15 are I/O pins. I/O through these pins can be controlled in byte units using the LDQM and
11, 12, 39, 40, to UDQM pins.
42, 43, 45, 46, I/O15
48, 49
14, 36 LDQM, LDQM and UDQM control the lower and upper bytes of the I/O buffers. In read mode, LDQM and
UDQM UDQM control the output buffer. When LDQM or UDQM is LOW,
the corresponding buffer byte is enabled, and when HIGH, disabled. The outputs go to theHIGH
impedance state when LDQM/UDQM is HIGH. This function corresponds to OE in conventional
DRAMs. In write mode, LDQM and UDQM control the input buffer.
When LDQM or UDQM is LOW, the corresponding buffer byte is enabled, and data can be written to
the device. When LDQM or UDQM is HIGH, input data is masked and cannot be written to the device.
17 RAS RAS, in conjunction with CAS and WE, forms the device command. See the "Command Truth
15 WE WE, in conjunction with RAS and CAS, forms the device command. See the "Command Truth
7, 13, 38, 44 VCCQ VCCQ is the output buffer power supply.

1, 25 VCC VCC is the device internal power supply.
4, 10, 41, 47 GNDQ GNDQ is the output buffer ground.
26, 50 GND GND is the device internal ground.

TX-SR604/604E/8460

Q4004: LC74763-9836 (On-Screen Display IC)
BLOCK DIAGRAM
CS
Serial- 8-bit latch
SIN parallel and
converter command
SCLK decoder
Horizontal Vertical Flashing/
Horizontal Vertical Display RAM write
display display reversal
character character control address
position position control
RST size register size register register counter
register register register
SECAM
Composite
synchro- Flashing/
Decoder
525/625 Horizontal Vertical
nization Horizontal Vertical reversal
size size dot counter dot counter control Display RAM
NTSC/PAL signal counter counter
control circuit
3.58/4.43
VDD1
Horizontal Vertical
VDD2 display display
position position
VSS detection detection
SYNCDET Line Decoder

Character
control control
counter counter
VCOIN
Sync
Font ROM
detector
VCOOUT
FC
AFC
circuit
AMPIN
Composite Character output control Shift register
synchronization Synchronization
AMPOUT Timing generator signal generator Background control
signal separator
control
video output control
PDOUT
SYSIN Sync
separator
SEPC HSYNOUT VSYNOUT Xtal IN1 Xtal OUT1 Xtal IN2 Xtal OUT2 CVCR CVIN CVOUT
PIN CONFIGRATION
SYNCDET
VCOOUT
AMPOUT
SYNCIN
CVOUT
PDOUT
AMPIN
VCOIN
CVCR
VDD2
SEPC
VDD1
CVIN
VSS
FC
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LC74763
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
NTSC/PAL
XTALIN1
3.58/4.43
XTALOUT1
SECAM
VSYNCOUT
RST
525/625
SIN
CS
VSS
SCLK
XTALIN2
HSYNCOUT
XYALOUT2

TX-SR604/604E/8460

Q4004: LC74763-9836 (On-Screen Display IC)
Pin No. Symbol Function Description
1 VSS Ground Ground connection
2 Xtal IN1 Connection for the crystal and capacitor used to form the crystal oscillator that generates
Crystal oscillator connection the internal synchronization signal. The oscillator can be selected with a command switch.
3 Xtal OUT1
Horizontal synchronization Outputs the horizontal synchronization signal (AFC). The output polarity can be selected
4 HSYNC OUT
output (metal option). Also functions as general output port (command switch).
5 Xtal IN2 Connection for the crystal and capacitor used to form the crystal oscillator that generates
Crystal oscillator connection the internal synchronization signal.
6 Xtal OUT2
Outputs the vertical synchronization signal. The output polarity can be selected (metal
7 VSYNC OUT Vertical synchronization output option). Also functions as general output port (command switch).
Enables/disables serial data input. Serial data is enabled when this pin is low (hysteresis
8 CS Enable input
input). Pull-up resistor built in (metal option).
9 SIN Data input Serial data input (hysteresis input). Pull-up resistor built in (metal option).
10 SCLK Clock input Clock input for serial data input (hysteresis input). Pull-up resistor built in (metal option).
During input, switches between SECAM and other modes.
SECAM mode switch input/
11 SECAM During output, functions as general output port or internal V output (command switch).
output (command switch)
Low = other modes, high = SECAM mode
During input, switches between 525 scan lines and 625 scan lines.
525/625 switch input/output
12 525/625 During output, functions as general output port or character data output (command switch).
(command switch)
Low = 525 lines, high = 625 lines
Switches the color mode between NTSC and PAL.
NTSC/PAL switch input/output
13 NTSC/PAL During output, functions as general output port or frame data output (command switch).
(command switch)
Low = NTSC, high = PAL
Switch FSC between 3.58 MHz and 4.43 MHz.
14 3.58/4.43 3.58/4.43 switch input/output During output, functions as general output port or halftone output (command switch).
(command switch) Low = 3.58, high = 4.43
System reset input pin, low is active (hysteresis input).
15 RST Reset input
Pull-up resistor built in (metal option).
16 CVOUT Video signal output Composite video output
17 V DD2 Power supply connection Power supply connection for composite video signal level generation
18 CV IN Video signal input Composite video input
19 CV CR Video signal input SECAM chroma signal input
20 SYNC IN Sync separator circuit input Built-in sync separator circuit video signal input
21 SEP C Sync separator circuit Built-in sync separator circuit
22 V SS Ground Ground connection
23 PD OUT Control voltage output AFC control voltage output
24 AMP IN
AFC filter connection Filter connection
25 AMP OUT
26 FC Control voltage input AFC control voltage input
27 VCOIN
LC oscillator connection VCO LC oscillator circuit coil and capacitor connection
28 VCOOUT
Outputs the exclusive NOR of the horizontal synchronization signal (AFC) and CSYNC (sync
External synchronization signal
29 SYNCDET separator). The output polarity can be selected (metal option). Also functions as general
detection output output port (command switch).
30 VDD1 Power supply connection Power supply connection (+5 V: digital system power supply)

TX-SR604/604E/8460

Q7003: M66005 (FL Tube Driver)
BLOCK DIAGRAM
Display code RAM 59 SEG00

CGROM
Bank 1 : 8bit x 16 (35bit x 160)
Bank 2 : 8bit x 64
Segment 33 SEG26
output
code circuit 31 SEG27
write
dot data CGRAM
(35bit x 16) 24 SEG34
write
CS 14
Serial data Code/
SCK 15 receive 23 SEG35
command
circuit control
SDATA 16 64 DIG12/SEG36
circuit Segment/
Digit
63 DIG13/SEG37
select/
code output
select 62 DIG14/SEG38
circuit
61 DIG15/SEG39
XIN 21 Clock timing Display
generator clock controller
XOUT 20 scan pulse
Digit 12 DIG00
output
circuit
RESET 13 1 DIG11
Vcc1 19
Vcc2 60 2
18 P0
Vss 22
17 P1
Vp 32
PIN NO. SYMBOL PIN NAME DESCRIPTION
13 RESET Reset input This pin is used to initialize the internal state of the M66004.
"L" : Communication with the MCU is possible.
14 CS Chip select input
"H" : Any instruction from the MCU is neglected.
15 SCK Shift clock input At the rising edge from "L" to "H", input data is shifted.
16 SDATA Serial data input Character code or command data to display is input from MSB.
21, XIN, Clock input This pin is used to connect a resister and a capacitor externally to
20 XOUT Clock output set oscillation frequency.
1~12 DIG00 ~ Digit output These pins are used to connect to digit pins of VFD.
61~64 DIG15
23~31 SEG00 ~ Segment output These pins are used to connect to segment pins of VFD.
33~59 SEG39
17, 18 P0, P1 Output port (static operation)
19 VCC1 Positive power supply for internal logic.
60 VCC2 Positive power supply for high-pressure-resistant output port.
22 VSS GND
32 VP Negative power supply for VFD drive.

TX-SR604/604E/8460

Q5501 : R2S15211FP (8 ch Electronic Volume and 11 Input Selector and Tone Control)
SYSTEM BLOCK DIAGRAM

Multi Multi
REC SUB Rin Lin Rch Tone Lch Tone CLOCK DATA
MCU I/F
Tone
1 Volume Volume
2 Bass& Lout
3
Input selector
Treble
Lch 45 Volume Volume
6 Bass&
7 Treble Rout
8
9
10
11
Input Volume Volume
Multi SBLout
mono ATT Out L SBLin
for
1 ADC Multi Volume Volume
2 SBRout
3 SBRin
Input selector
4 Multi
5 Volume
Rch 6 Cin Cout
7 Input
8 ATT Out R Multi
9 for SWin Volume
10 SWout
11 ADC Multi
SLin Volume
SLout
Multi
SRin Volume
SRout
REC SUB
AGND AVEE AVCC

TX-SR604/604E/8460

BLOCK DIAGRAM AND PIN CONFIGURATION
BASSR2
BASSR1
SBRIN2
SBLIN2
MONO
SWIN2
FRIN2
SRIN2
ADCR
ADCL
FLIN2
SLIN2
SUBR
SUBL
TRER
CIN2
40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25
0/-6/-12/-18dB
AVCC
ATT
DGND 41 24 AVCC
MCU
DATA 42 23 TREL
I/F
CLOCK 43 22 BASSL2
AVEE 44 21 BASSL1
Bass/ Treble
MAIN 0~-95dB, -14~+14dB
- +16~0dB
INR1 45 SUB
(1dBstep) (2dB step) (1dBstep) 20 FRC
INL1 46 19 FROUT
Tone
INR2 47 18 AGND
INL2 48 Tone 17 FLOUT
INR3 49 0~-95dB, Bass/ Treble +16~0dB
- -14~+14dB (1dBstep) 16 FLC
(1dBstep) (2dB step)
INL3 50 15 6-C
+16~-95dB,
INR4 51 - (1dBstep) 14 6-OUT (SR OUT)
INL4 52 13 AGND
+16~-95dB,
INR5 53 - (1dBstep) 12 5-OUT (SL OUT)
+16~-95dB,
- (1dBstep)
INL5 54 11 5-C
INR6 55 10 4-C
+16~-95dB,
- (1dBstep)
INL6 56 9 4-OUT (SW OUT)
INR7 57 8 AGND
+16~-95dB,
- (1dBstep) 3-OUT (C OUT)
INL7 58 7
INR8 59 6 3-C
INL8 60 +16~-95dB, 5 2-C

- (1dBstep)
INRA/RECR1 61 4 2-OUT (SBR OUT)
REC
INLA/RECL1 62 3 AGND
INR9 63 2 1-OUT (SBL OUT)
INL9 64 1 1-C
65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
FLIN1
FRIN1
SRIN1
CIN1
SWIN1
SLIN1
SBLIN1
SBRIN1
INL11/RECL5
RECR3
INR11/RECR5
RECL3
INL10/RECL4
INRB/RECR2
INLB/RECL2
INR10/RECR4

TX-SR604/604E/8460

PIN No. Name Function
19,17, FROUT,FLOUT,
14,12, 6-OUT,5-OUT,
9,7, Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel
4-OUT, 3-OUT,
4,2 2-OUT,1-OUT
20,16, FRC,FLC,
15,11, 6-C,5-C, Connects capacitor for reducing click noise of
10,6, 4-C,3-C, L/R/C/SW/SL/SR/SBL/SBR channel volume
5,1 2-C,1-C
3,8,
AGND Analog ground of internal circuit
13,18
23,27 TREL, TRER Frequency characteristic setting pin of L/R channel tone control (Treble)
21,22, BASSL1,BASSL2
Frequency characteristic setting pin of L/R channel tone control (Bass)
25,26 BASSR1,BASSR2
24 AVCC Positive power supply to internal circuit

35,34, FRIN2, FLIN2,
33,32, SRN2,SLIN2,
31,30, SWIN2,CIN2,
29,28 SBRIN2,SBLIN2
Input pin of L/R/C/SW/SL/SR/SBL/SBR channel (Multi IN 1/2)
73,74, FLIN1, FRIN1,
75,76, CIN1,SWIN1,
77,78, SLIN1,SRIN1,
79,80 SBLIN1,SBRIN1
41 DGND Digital ground of internal circuit
42 DATA Input pin of control data
43 CLOCK Input pin of control clock
44 AVEE Negative power supply to internal circuit
46,48,50, INL1,INL2, INL3,
52,54,56, INL4,INL5,INL6,
58,60,64 INL7,INL8,INL9
Input pin of L/R channel (Input Selector)
45,47,49, INR1,INR2, INR3,
51,53,55, INR4,INR5,INR6,
57,59,63 INR7,INR8,INR9
40 MONO Input pin of monaural (Input Selector)
38,39 SUBL,SUBR Output pin for L/R channel SUB Output
36,37 ADCL, ADCR Output pin for L/R channel ADC
72 RECL3
Output pin for L/R channel REC Output
71 RECR3
61,62, INRA/RECR1,INLA/RECL1,
65,66, INRB/RECR2,INLB/RECL2, Input pin of L/R channel (Input Selector)/
67,68, INR10/RECR4,INL10/RECL4, Output pin for L/R channel REC Output
69,70 INR11/RECR5,INL11/RECL5

TX-SR604/604E/8460

Q8401 : SiI9030CTU (HDMI Transmitter)
BLOCK DIAGRAM
CSDA I2 C E-DDC DSDA
CSCL Slave Master DSCL
CI2CA Registers INT

----------------
Configuration Receiver Sense + Interrupt Logic HPD
Logic Block
RESET#
HDCP HDCP
Encryption Keys
Engine EEPROM
Video Data encrypted EXT_SWIN

IDCK data
Capture / TXC±
D[23:0]
DE Gen /
4:2:2 to
4:4:4
CSC XOR PanelLink
HSYNC
656 TMDS TX0±
VSYNC Digital
Logic Core TX1±
DE Block TX2±
control signals
SPDIF
MCLK Audio Data audio data
SCK Capture
WS
SD[3:0]
Logic
Block
SYSTEM APPLICATION
DDC EDID 0
HDMI Connector Port 0
DDC
Digital Video
HDMI Connector
TMDS HDMI HDMI TMDS

RECEIVER DSD
TRANSMITTER DDC
I2S
SiI9033
I2S
TMDS SPDIF SiI9030
DDC MCLK
DDC EDID1
I2C
Micro-
controller
I2S
Amplifier
Other Audio Sources Audio DSP Audio DAC

TX-SR604/604E/8460

PIN CONFIGURATION
EXT_SWING
PGND2
PGND1
PVCC2
PVCC1
RSVDL
AGND
AGND
AGND
AVCC
AVCC
TXC+
TX2+
TX1+
TX0+
TXC-
TX2-
TX1-
TX0-
NC
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
CI2CA 41 20 DSCL
RESET# 42 19 DSDA
CSCL 43 18 HPD
CSDA 44 17 INT
CVCC18 45 16 CVCC18
CGND 46 15 CGND
IOGND 47 14 IOGND
IOVCC 48 13 IOVCC
D23 49 SiI 9030 12 SCK
D22 50 11 WS
80-Pin TQFP
D21 51 (Top View) 10 SD0
D20 52 9 SD1
D19 53 8 SD2
D18 54 7 SD3
D17 55 6 MCLK
D16 56 5 SPDIF
D15 57 4 CVCC18
D14 58 3 CGND
CVCC18 59 2 VSYNC
CGND 60 1 HSYNC
66
70
74
76
62
63
64
65
67
68
69
71
72
73
61
75
78
80
77
79
IOVCC
IOGND
CGND
IDCK
D13
D12
D11
D10
D8
D7
D6
D5
CVCC18
D4
D3
D9
DE
D2
D1
D0

TX-SR604/604E/8460

Pin # Pin Name I/O Description Use
1 HSYNC I Horizontal Sync input control signal Video and Audio
2 VSYNC I Vertical yncS input control signal Video and Audio
3 CGND Digital core GND. Ground
4 CVCC18 Digital core VCC. Connect to 1.8V supply. Power
5 SPDIF I S/PDIF Audio input Video and Audio
6 MCLK I Audio Input Master Clock Video and Audio
7 SD3 I I2S Serial Data Video and Audio
11 WS I I2S Word Select Video and Audio
12 SCK I I2S Serial Clock Video and Audio
13 IOVCC IO Pin VCC. Connect to 3.3V supply. Power
14 IOGND IO Pin GND. Ground
17 INT O Interrupt Output. Confirration/Programming
18 HPD I Hot Plug Detect Input. Confirration/Programming
19 DSDA I/O DDC data Control
20 DSCL I/O DDC Clock Control
21 RSVDL I Reserved for use by Silicon image, and must be tied LOW. Confirration/Programming
22 PGND1 TMDS Core PLL Ground. Ground
23 PVCC1 TMDS Core PLL Power. Connect to 3.3V supply. Power
Voltage Swing Adjustment. The resistor between AVCC and this pin
24 EXT_SWING I Differential signal data
determines the amplitude of the voltage swing.
25 AGND Analog GND. Ground
26 TXC- O
TMDS output clock. Differential signal data
27 TXC+ O
28 AVCC Analog VCC. Connect to 3.3Vsupply. Power
29 TX0- O
TMDS output data. Differential signal data
30 TX0+ O
32 TX1- O
33 TX1+ O
34 AVCC Analog VCC. Connect to 3.3Vsupply. Power
35 TX2- O
36 TX2+ O
38 PVCC2 Filter PLL Power. Connect to 3.3V supply. P Ower
39 PGND2 Filter PLL Ground. Ground
40 NC Not connected.
41 CI2CA I I2C device address select Control
42 RESET I Reset Pin. Active LOW Control
43 CSCL I I2C Clock Control
44 CSDA I/O I2C Data Control
49 D23 I
50 D22 I
51 D21 I
52 D20 I
53 D19 I 12-bit Input Pixel Data Bus. These pins are used in 24-bit mode, single-
Video and Audio
54 D18 I edge mode.
55 D17 I
56 D16 I
57 D15 I
58 D14 I
61 D13 I
63 D11 I Video and Audio
edge mode.
64 D10 I
65 D9 I
66 IDCK I Input Data Clock Video and Audio
67 D8 I
Video and Audio
69 D6 I edge mode.
70 D5 I
75 D4 I
77 D2 I Video and Audio
edge mode.
78 D1 I
79 D0 I
80 DE I Data enable Video and Audio

TX-SR604/604E/8460

Q8501 : SiI9033 (HDMI Receiver)
BLOCK DIAGRAM
DSDA0 Registers RESET#

DSCL0 Port I2C ------------- INT
DSDA1 MUX Slave Configuration
I2C CSDA
DSCL1 Logic Block
Slave CSCL
HDCP
Wmbedded Keys Aux
R1XC MCLK MCLKOUT
PanelLink Data XTALIN
24-Bit Data Gen
R1X0 TMDS TM XTALOUT
R1X1 Digital H8,V8,DE HDCP &
Core Repeater
R1X2 SCK
HDMI
Decryption WS
Mode Audio
Engine SD[3:0]
Control Data SPDIF
Decode DCLK
DL[3:0]
XOR DR[3:0]
24-Bit
Port Mask Decrypted
24-Bit Encrpted
MUX Pixel DataR
Pixel Data
Control Signals
EVNODD
Video Color DE
Space HSYNC
HS,VS,DE
Converter VSYNC
R0XC
PanelLink Up/Down ODCK
R0X0 TMDS TM Sampling 24
Q[23:0]
24-Bit Data
R0X1 Digital CLK48B
Core
R0X2 Auto A/V
Port Exception MUTEOUT
Detect Handling
SCDT
R0PWR5V
R1PWR5V

TX-SR604/604E/8460

SYSTEM APPLICATION
DDC EDID 0
DDC
Digital Video
HDMI Connector
TMDS HDMI HDMI TMDS
RECEIVER DSD
TRANSMITTER DDC
I2S
TMDS SiI9033 SPDIF I2S

SiI9030
DDC MCLK
DDC EDID 1
I2C
Micro-
controller
I2S
Amplifier
Other Audio Sources Audio DSP Audio DAC

TX-SR604/604E/8460

PIN CONFIGURATION
TMDSPGND
R0X0+101
RSVD_A
PVCCO
PVCC1
R0XC+
R1XC+
R0X1+
R0X2+
R1X1+
R1X2+
R1X0+
R0XC-
R1XC-
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
R0X2-
R0X0-
R0X1-
R1X2-
R1X1-
R1X0-
AVCC
AVCC
AVCC
AVCC
AVCC
AVCC
AVCC
AVCC
56
48
40
72
64
52
51
44
43
68
67
53
45
37
60
59
69
55
54
50
49
47
46
42
41
39
38
61
71
70
66
65
63
62
58
57
CGND 73 36 CGND
CVCC18 74 35 CVCC18
IOGND 75 34 R0PWR5V
IOVCC 76 33 R1PWR5V
MUTEOUT 77 32 DSCL0
SPDIF 78 31 DSDA0
CVCC18 79 30 DSCL1
CGND 80 29 DSDA1
SD3 81 28 CSCL
SD2 82 27 CSDA
SD1 83 26 IOVCC
SD0 84 25 IOGND
WS 85 24 CGND
SCK 86 23 CVCC18
NC 87 22 CVCC18
MCLK 88 SiI9033 21 CGND
IOVCC 89 20 DL3
IOGND 90
144 Pin 19 DR3
CGND 91 TQFP 18 DL2
CVCC 92 17 DR2
NC 93 16 IOVCC
AUDPVCC18 94 15 IOGND
AUDPGND 95 14 DL1
XTALOUT 96 13 DR1
XTALIN 97 12 DL0
XTALVCC 98 11 DR0
REGVCC 99 10 DCLK
NC 100 9 ENVODD
RSVDL 101 8 NC
RESET# 102 7 NC
SCDT 103 6 NC
INT 104 5 IOVCC
CVCC18 105 4 IOGND
CGND 106 3 VSYNC
CLK48B 107 2 HSYNC
IOGND 108 1 DE
125
133
141
109
117
129
130
137
138
113
114
128
136
144
121
122
112
126
127
131
132
134
135
139
140
142
143
120
110
111
115
116
118
119
123
124
IOGND
Q20
IOVCC
Q21
Q23
Q22
CGND
CVCC18
Q18
CGND
IOGND
CGND
CVCC18
Q19
Q17
Q16
ODCK
IOVCC
CVCC18
IOVCC
Q3
Q13
Q0
Q7
Q4
Q2
Q1
Q12
Q15
Q14
Q9
Q8
Q11
Q10
Q5
Q6

TX-SR604/604E/8460


Digital Video Output Pins
NOTE

TX-SR604/604E/8460

TERMINAL DESCRIPTION (2/5) Digital Audio Output Pins
NOTE
TERMINAL DESCRIPTION (3/5) Configuration/Programming Pins
NOTE

TX-SR604/604E/8460

TERMINAL DESCRIPTION (4/5) Differential Signal Data Pins
TERMINAL DESCRIPTION (5/5) Power and Ground Pins

TX-SR604/604E/8460

Q201 : TMS320DA707 (32 bit Floating-Point Digital Signal Processor)
BLOCK DIAGRAM
Program/Data JTAG EMU

192 RAM
D1 192K Bytes
Data 64 McASP0
R/W 32 16 Serializers
Program/Data
C67x+ CPU 256 ROM Page1 32
D2 256K Bytes
Memory
Data 64 Controller Program/Data 32
McASP DMA Bus

R/W McASP1
256 ROM Page2
256K Bytes 32 6 Serializers
Program
I/O INT Fetch Program/Data
256 ROM Page3 32 McASP2
256K Bytes 2 Serializers
256
32 DIT Only
Peripheral Configuration Bus

Program CSP 32 32
32 SPI1
Cache 256
32K Bytes PMP DMP
32 SPI0
32 32
32 I2C0
HighœPerformance
32
Crossbar Switch
32 I2C1
32 32 32 32
32 RTI
I/O Interrupts MAX0 CONTROL MAX1 Events 32 PLL

Out In
EMIF
dMAX

TX-SR604/604E/8460

SYSTEM DIAGRAM with PERIPHERALS

DSP
Audio Zone 1 CODEC, DIR,

192K McASP0 ADC, DAC, DSD,
SPI or I2C Network
Bytes
Memory Controller
C67x+ SPI1 Control (optional)

RAM
DSP Core I2C0
Audio Zone 2
McASP1
768K Audio Zone 3 CODEC, DIR,
Bytes McASP2 ADC, DAC, DSD,
Program ROM Network
Cache SPIO
I2C1
Crossbar Switch
RTI Digital Out
EMIF dMAX PLL OSC

5 Independent Audio
Zones (3 TX + 2 RX)
16 Serial Data Pins
ASYNC
FLASH DSP Control
SPI or I2C
Host
Microprocessor
100 MHz
SDRAM

TX-SR604/604E/8460

PIN CONFIGURATION
SPI0_ENA/I2C1_SDA
SPI0_SCS/I2C1_SCL
SPI0_CLK/I2C0_SCL
EM_CS[2]
EM_CS[0]
EM_BA[0]
EM_BA[1]
EM_A[10]
EM_A[11]
EM_RAS
EM_A[0]
EM_A[1]
EM_A[2]
EM_A[3]
EM_A[4]
EM_A[5]
EM_A[6]
EM_A[7]
EM_A[8]
EM_A[9]
EM_RW
EM_OE
DVDD
CVDD
DVDD
CVDD
CVDD
DVDD
CVDD
DVDD
VSS
VSS
VSS
VSS
VSS
VSS
77
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
76
75
73
108
107
106
105
104
103
102
101
100
74
VSS 109 72 VSS
SPI0_SIMO 110 71 EM_CKE
SPI0_SOMI/I2C0_SDA 111 70 EM_CLK
DVDD 112 69 VSS
AXR0[0] 113 68 DVDD
VSS 114 67 EM_WE_DQM[1]
AXR0[1] 115 66 EM_D[8]
AXR0[2] 116 65 CVDD
AXR0[3] 117 64 EM_D[9]
VSS 118 63 EM_D[10]
AXR0[4] 119 62 VSS
AXR0[5]/SPI1_SCS 120 61 EM_D[11]
AXR0[6]/SPI1_ENA 121 60 DVDD
AXR0[7]/SPI1_CLK 122 59 EM_D[12]
CVDD 123 58 EM_D[13]
VSS 124 57 CVDD
DVDD 125 56 EM_D[14]
AXR0[8]/AXR1[5]/SPI1_SOMI 126 TMP320DA707 55 EM_D[15]
AXR0[9]/AXR1[4]/SPI1_SIMO 127 54 VSS
CVDD 128 53 CVDD
VSS 129 52 EM_D[0]
AXR0[10]/AXR1[3] 130 51 EM_D[1]
AXR0[11]/AXR1[2] 131 50 DVDD
CVDD 132 49 EM_D[2]
VSS 133 48 EM_D[3]
AXR0[12]/AXR1[1] 134 47 VSS
AXR0[13]/AXR1[0] 135 46 EM_D[4]
DVDD 136 45 EM_D[5]
AXR0[14]/AXR2[1] 137 44 CVDD
AXR0[15]/AXR2[0] 138 43 EM_D[6]
ACLKR0 139 42 DVDD
VSS 140 41 EM_D[7]
AFSR0 141 40 VSS
ACLKX0 142 39 EM_WE_DQM[0]
AHCLKR0/AHCLKR1 143 38 EM_WE
AFSX0 144 37 EM_CAS
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
11
1
2
3
4
5
6
7
8
9
OSCOUT
TDO
TRST
TDI
OSCIN
CVDD
DVDD
CVDD
CVDD
OSCVDD
DVDD
CVDD
TCK
VSS
VSS
VSS
VSS
VSS
OSCVSS
VSS
VSS
VSS
TMS
CLKIN
AFSR1
AMUTE0
AMUTE1
RESET
EMU[0]
EMU[1]
ACLKR1
AFSX1
PLLHV
AHCLKX1
ACLKX1
AHCLKX0/AHCLKX2

TX-SR604/604E/8460


PIN
SIGNAL NAME TYPE (1) PULL (2) GPIO (3) DESCRIPTION
NO.
External Memory Interface (EMIF) Address and Control
EM_A[0] 91 O - N
EM_A[1] 89 O - N
EM_A[2] 88 O - N
EM_A[3] 86 O - N
EM_A[4] 84 O - N
EM_A[5] 83 O - N
EMIF Address Bus
EM_A[6] 80 O - N
EM_A[7] 79 O - N
EM_A[8] 76 O - N
EM_A[9] 75 O - N
EM_A[10] 93 O - N
EM_A[11] 74 O - N
EM_BA[0] 96 O - N SDRAM Bank Address and Asynchronous Memory
EM_BA[1] 94 O - N Low-Order Address
EM_CS[0] 97 O - N SDRAM Chip Select
EM_CS[2] 100 O - N Asynchronous Memory Chip Select
EM_CAS 37 O - N SDRAM Column Address Strobe
EM_RAS 98 O - N SDRAM Row Address Strobe
EM_WE 38 O - N SDRAM Write Enable
EM_CKE 71 O - N SDRAM Clock Enable
EM_CLK 70 O - N SDRAM Clock
EM_WE_DQM[0] 39 O - N Write Enable or Byte Enable for EM_D[7:0]
EM_WE_DQM[1] 67 O - N Write Enable or Byte Enable for EM_D[15:8]
EM_OE 104 O - N SDRAM Output Enable
EM_RW 102 O - N Asynchronous Memory Read/not Write
(1) TYPE column refers to pin direction in functional mode. If a pin has more than one function with different directions, the functions are
separated with a slash (/).
(2) PULL column:
IPD = Internal Pulldown resistor
IPU = Internal Pullup resistor
(3) If the GPIO column is 'Y', then in GPIO mode, the pin is configurable as an IO unless otherwise marked.

TX-SR604/604E/8460


PIN
NO.
External Memory Interface (EMIF) Data Bus
EM_D[0] 52 IO - N
EM_D[1] 51 IO - N
EM_D[2] 49 IO - N
EM_D[3] 48 IO - N
EM_D[4] 46 IO - N
EM_D[5] 45 IO - N
EM_D[6] 43 IO - N
EM_D[7] 41 IO - N
EMIF Data Bus [Lower 16 Bits]
EM_D[8] 66 IO - N
EM_D[9] 64 IO - N
EM_D[10] 63 IO - N
EM_D[11] 61 IO - N
EM_D[12] 59 IO - N
EM_D[13] 58 IO - N
EM_D[14] 56 IO - N
EM_D[15] 55 IO - N

TX-SR604/604E/8460


PIN
NO.
McASP0, McASP1, McASP2, and SPI1 Serial Ports
AHCLKR0/AHCLKR1 143 IO - Y McASP0 and McASP1 Receive Master Clock
ACLKR0 139 IO - Y McASP0 Receive Bit Clock
AFSR0 141 IO - Y McASP0 Receive Frame Sync (L/R Clock)
AHCLKX0/AHCLKX2 2 IO - Y McASP0 and McASP2 Transmit Master Clock
ACLKX0 142 IO - Y McASP0 Transmit Bit Clock
AFSX0 144 IO - Y McASP0 Transmit Frame Sync (L/R Clock)
AMUTE0 3 O - Y McASP0 MUTE Output
AXR0[0] 113 IO - Y McASP0 Serial Data 0
AXR0[5]/SPI1_SCS 120 IO - Y McASP0 Serial Data 5 or SPI1 Slave Chip Select
AXR0[6]/SPI1_ENA 121 IO - Y McASP0 Serial Data 6 or SPI1 Enable (Ready)
AXR0[7]/SPI1_CLK 122 IO - Y McASP0 Serial Data 7 or SPI1 Serial Clock
AXR0[8]/AXR1[5]/ McASP0 Serial Data 8 or McASP1 Serial Data 5 or
126 IO - Y
SPI1_SOMI SPI1 Data Pin Slave Out Master In
AXR0[9]/AXR1[4]/ McASP0 Serial Data 9 or McASP1 Serial Data 4 or
127 IO - Y
SPI1_SIMO SPI1 Data Pin Slave In Master Out
AXR0[10]/AXR1[3] 130 IO - Y McASP0 Serial Data 10 or McASP1 Serial Data 3
ACLKR1 9 IO - Y McASP1 Receive Bit Clock
AFSR1 12 IO - Y McASP1 Receive Frame Sync (L/R Clock)
AHCLKX1 5 IO - Y McASP1 Transmit Master Clock
ACLKX1 7 IO - Y McASP1 Transmit Bit Clock
AFSX1 11 IO - Y McASP1 Transmit Frame Sync (L/R Clock)
AMUTE1 4 O - Y McASP1 MUTE Output
SPI0, I2C0, and I2C1 Serial Port Pins
SPI0_SOMI/I2C0_SDA 111 IO - Y SPI0 Data Pin Slave Out Master In or I2C0 Serial Data
SPI0_SIMO 110 IO - Y SPI0 Data Pin Slave In Master Out
SPI0_CLK/I2C0_SCL 108 IO - Y SPI0 Serial Clock or I2C0 Serial Clock
SPI0_SCS/I2C1_SCL 107 IO - Y SPI0 Slave Chip Select or I2C1 Serial Clock
SPI0_ENA/I2C1_SDA 105 IO - Y SPI0 Enable (Ready) or I2C1 Serial Data

TX-SR604/604E/8460


PIN
NO.
Clocks
OSCIN 23 I - N 1.2-V Oscillator Input
OSCOUT 24 O - N 1.2-V Oscillator Output
OSCVDD 25 PWR - N Oscillator 1.2-V VDD tap point (for filter only)
OSCVSS 22 PWR - N Oscillator VSS tap point (for filter only)
CLKIN 17 I - N Alternate clock input (3.3-V LVCMOS Input)
PLLHV 27 PWR - N PLL 3.3-V Supply Input (requires external filter)
Device Reset
RESET 14 I - N Device reset pin
Emulation/JTAG Port
TCK 35 I IPU N Test Clock
TMS 19 I IPU N Test Mode Select
TDI 28 I IPU N Test Data In
TDO 29 OZ IPU N Test Data Out
TRST 21 I IPD N Test Reset
EMU[0] 32 IO IPU N Emulation Pin 0
EMU[1] 34 IO IPU N Emulation Pin 1
Power Pins
Core Supply (CVDD) 8, 16, 20, 33, 44, 53, 57, 65, 77, 85, 90, 101, 123, 128, 132
IO Supply (DVDD) 10, 31, 42, 50, 60, 68, 73, 81, 92, 103, 112, 125, 136
Ground (VSS) 1, 6, 13, 15, 18, 26, 30, 36, 40, 47, 54, 62, 69, 72, 78, 82, 87, 95, 99, 106, 109, 114, 118, 124, 129, 133, 140

TX-SR604/604E/8460

Q8404,Q8602 : XC6213B332MR (Regulator with high-speed ON/OFF switch)
BLOCK DIAGRAM
PIN CONFIGURATION
PIN NO PIN NAME FUNCTION

1 VIN INPUT
2 VSS GND
3 CE ON/OFF CONTROL PIN
4 NC NOT USED
5 VOUT OUTPUT

TX-SR604/604E/8460
FL TUBE VIEW
Q7002: 16BT128GNYK
16G
15G 14G 13G 12G 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G
1-1 2-1 3-1 4-1 5-1
1-2 2-2 3-2 4-2 5-2
1-3 2-3 3-3 4-3 5-3
1-4 2-4 3-4 4-4 5-4
1-5 2-5 3-5 4-5 5-5
1-6 2-6 3-6 4-6 5-6
1-7 2-7 3-7 4-7 5-7
(1G-15G)
16G 15G-1G 16G 15G-1G

P1 1-1 P19 4-4
P2 2-1 P20 5-4
P3 3-1 P21 1-5
P4 4-1 P22 2-5
P5 5-1 P23 3-5
P6 1-2 P24 4-5
P7 2-2 P25 5-5
P8 3-2 P26 1-6
P9 4-2 P27 2-6
P10 5-2 P28 3-6
P11 1-3 P29 4-6
P12 2-3 P30 5-6
P13 3-3 P31 1-7
P14 4-3 P32 2-7
P15 5-3 P33 3-7
P16 1-4 P34 4-7
P17 2-4 P35 5-7
P18 3-4

TX-SR604/604E/8460
MICROPROCESSOR TERMINAL DESCRIPTIONS

Q701: M30627FHPGP
No. Pin Name Function I/O Act. Description
1 Vref Vref A/D Reference Voltage (Vcc)
2 AVcc AVcc A/D Power supply
3 P97/~ADTRG/SIN4 VMSDI I H Data input pin from HDMI microprosessor
4 P96/ANEX1/SOUT4 VMSDO O H Data output pin to HDMI microprosessor
5 P95/ANEX0/CLK4 VMCLK O CLK Clock output pin to HDMI microprosessor
6 P94/DA1/TB4IN VCRST O H Reset cotrol pin to Video Encoder/Decoder
7 P93/DA0/TB3IN ~VMUT O L VIDEO MUTE control pin
8 P92/TB2IN/SOUT3 OSDSDO O H Data output pin to OSD
9 P91/TB1IN/SIN3 SYNC I H VIDEO SYNC detect pin
10 P90/TB0IN/CLK3 OSDCLK O CLK Clock output pin to OSD
11 P141 ~OSDCS O L OSD chip select pin
12 P140 O H No use
13 BYTE BYTE External bus width select pin. Connect to Ground.
14 CNVSS CNVss Processor mode select pin. Connect to the ground via resistor.
15 P87/XCIN RDSDATA I H RDS data input from LA72725 in tuner pack
16 P86/XCOUT XMSRSEL O H XM/SIRIUS select pin
17 ~RESET ~RESET I L Reset input
18 XOUT Xout Ceramic oscillator connection pin.
19 VSS Vss Power supply Ground pin
20 XIN Xin Ceramic oscillator connection pin.
21 VCC1 Vcc1 Power supply pin
22 P85/~NMI ~NMI I L No use
23 P84/~INT2 POFF I L Power failure detection input
24 P83/~INT1 VSYNC I L Vertical sync signal detection input.
25 P82/~INT0 ~XMERRIRQ/~RDSCLK I L (D-type)XM IC interrupt input / (P-type)RDS clock input / (Other type)No use
26 P81/TA4IN/~U XMCOMSEL O H Control output to XM IC
27 P80/TA4OUT/U ~XMDACRST O L XM DAC reset pin
28 P77/TA3IN ~DIRINT0 I H DIR/Codec unlock detect pin
29 P76/TA3OUT DSPCLK O L Clock output for DSP
30 P75/TA2IN/~W ~DSPINT2 I L DSP BUSY detect pin
31 P74/TA2OUT/W ~DSPINT1 I L DSP DEC detect pin
32 P73/~CTS2/~RTS2/TA1IN/~V ~DSPINT0 I L DSP NIC detect pin
33 P72/CLK2/TA1OUT/V ~SDET I L S-VIDEO detect pin
34 P71/RXD2/SCL2/TA0IN/TB5IN VDSCL/PLLSCL O CLK I2C clock output to tuner pack
35 P70/TXD2/SDA2/TA0OUT VDSDA/PLLSDA I/O H I2C data input/output from/to tuner pack
36 P67/TXD1/SDA1 FTXD O H Flash microprocessor rewrite port
37 Vcc1 H
38 P66/RXD1/SCL1 FRXD I H Flash microprocessor rewrite port
39 Vss H
40 P65/CLK1 FCLK O CLK Flash microprocessor rewrite port
41 P64/~CTS1/~RTS1/~CTS0/CLKS1 FBUSY O H Flash microprocessor rewrite port
42 P63/TXD0/SDA0 XMSRTXD O H XM/SIRIUS data output pin
43 P62/RXD0/SCL0 XMSRRXD I H XM/SIRIUS data input pin
44 P61/CLK0 ~XMRST O L XM IC reset pin
45 P60/~CTS0/~RTS0 ~DIRCS O L DIR/Codec chip select pin
46 P137 OSDINV O H OSD IC input select pin(Video)
47 P136 OSDINY O H OSD IC input select pin(S Video)
48 P135 O H No use
49 P134 O H No use
50 P57/~RDY/CLKOUT ~DIRRST O L DIR/Codec reset pin
51 P56/ALE ~DSPCS O L DSP chip select pin
52 P55/~HOLD ~FEPM O H Flash microprocessor rewrite port
53 P54/~HLDA ~DSPRST O L DSP reset pin
54 P133 O H No use
55 P132 O H No use
56 P131 MCHSEL O H ANALOG/HDMI MCLK select pin
57 P130 O H No use
58 P53/BCLK DIGCLK O CLK DIR/Codec/DSP clock output pin
59 P52/~RD DIGSDI I H DIR/Codec/DSP data input pin
60 P51/~WRH/~BHE DIGSDO O H DIR/Codec/DSP data output pin
61 P50/~WRL/~WR ~FCE I H Flash microprocessor rewrite port
62 P127 O H No use
63 P126 Z2MUT O H Mute control output for ZONE2
64 P125 SBZ2MUT O H Mute control output for SB/ZONE2

TX-SR604/604E/8460
MICROPROCESSOR TERMINAL DESCRIPTIONS
Q701: M30627FHPGP
No. Pin Name Function I/O Act. Description
65 P47/~CS3 AMUT O H Audio mute control pin
66 P46/~CS2 SPRLZ2 O H ZONE speaker relay control pin
67 P45/~CS1 SPRLSB O H Surround Back speaker relay control pin
68 P44/~CS0 SPRLCS O H Center/Surround Back speaker relay control pin
69 P43/A19 SPRLF O H Front speaker relay control pin
70 P42/A18 O H No use
71 P41/A17 VOLDATA O H Data output to R2S15211
72 P40/A16 VOLCLK O ELK Clock output to R2S15211
73 P37/A15 O H No use
74 P36/A14 VPOWER O H Power control output to video section
75 P35/A13 APOWER O H Power source control output
76 P34/A12 ~POFF2 I L POFF detect pin
77 P33/A11 ~FANH O L No use
78 P32/A10 ~FANCTRL O L No use
79 P31/A09 TRGZ2 O H ZONE 12V trigger output
80 P124 TRGB O H No use
81 P123 TRGA O H No use
82 P122 Z2VOLMUT O H No use
83 P121 Z2VOLCLK O H No use
84 P120 Z2VOLDAT O H No use
85 VCC2 Vcc2 Power supply
86 P30/A8(/-/D7) SEC1H O H Voltage-select control pin
87 VSS Vss Power supply Ground
88 P27/AN27/A7(/D7/D6) PROTECT I H Protection detect pin
89 P26/AN26/A6(/D6/D5) VOLH I A/D Signal level protection detect pin
90 P25/AN25/A5(/D5/D4) THERMAL I A/D Thermal protection detect pin
91 P24/AN24/A4(/D4/D3) INIT3 I A/D Initializing pin 3
94 P21/AN21/A1(/D1/D0) BAND I A/D Initializing pin for tuner frequency
95 P20/AN20/A0(/D0/-) ~SYSOUT O L RI output pin
96 P17/D15/~INT5 SYSIN I H RI input pin
97 P16/D14/~INT4 ~IRIN I L IRIN remote control input pin
98 P15/D13/~INT3 ~REMIN I L Remote controller signal input pin
99 P14/D12 ~STEREO I H FM Stereo detect pin
100 P13/D11 ~SD I H FM/AM TUNED detect pin
101 P12/D10 HPDET I H Headphone detection input
102 P11/D9 VOLB I H Master volume rotary encoder input
103 P10/D8 VOLA I H Master volume rotary encoder input
104 P07/AN07/D7 O H No use
105 P06/AN06/D6 LEDZONE2 O H Zone LED control pin
106 P05/AN05/D5 O H No use
107 P04/AN04/D4 LEDSTBY O H STANDBY LED control pin
108 P03/AN03/D3 FLDSDO O H Serial data output for FL driver
109 P02/AN02/D2 FLDCLK O ELK Serial clock output for FL driver
110 P01/AN01/D1 ~FLDCS O L Chip select output for FL driver
111 P00/AN00/D0 ~FLDRST O L Reset output for FL driver
112 P117 ~MICDET I L Microphone detection input
113 P116 MICMUT O H Microphone mute output
114 P115 O H No use
115 P114 O H No use
116 P113 ~VMRST O L HDMI microprocessor reset pin
117 P112 VMSTB I H HDMI microprocessor strobe input
118 P111 TXMUTE O H HDMI microprocessor mute pin
119 P110 RXMUTE I H HDMI microprocessor RXMUTE detect pin
120 P107/AN7/~KI3 ~KEYINT3 I L Key input interrupt 3
124 P103/AN3 KEY I A/D Key input 3
127 AVIS AVss Ground for A/D

TX-SR604/604E/8460
ADJUSTMENT PROCEDURE-1
IDLING CURRENT ADJUSTMENT
[When]
Exchange Power transistor (Q6050 - Q6056, Q6060 - Q6066) and Amplifier PC board (NAAF-8911).
[Procedure]
<Note> No load and No signal
Refer to <Fig-1> in " ADJUSTMENT PROCEDURES-2 " for the adjustment points and the test points.
1. Before idling adjustment, turn the trimming resistors to counter clockwise.
2. Connect the dc voltmeter to test points,
using two 100 ohm resistors between the poles of the jig terminal and the dc voltmeter terminals.
100 ohms Jig terminal

DC voltmeter Test point
1/4watts ID+
ID-
3. Connect the ac power cord to wall outlet.

4. Press the STANDBY/ON button to turn the power on.
5. Adjust the trimming resistors as the following procedure immediately after power on.
Channel Mark Adjustment point Measuring point Adjustment value

(Trimming resistor) (Test point)
Center C R6040 P6080 2.5 mV
Front Left L R6041 P6081 2.5 mV
Front Right R R6042 P6082 2.5 mV
Surround Left SL R6043 P6083 1.5 mV
Surround Right SR R6044 P6084 1.5 mV
Surround Back Left SBL R6045 P6085 1.5 mV
Surround Back Right SBR R6046 P6086 1.5 mV
6. Wait for 4 - 6 minutes. (Heat running)

7. Re-adjust the trimming resistors as the following procedure.
Channel Adjustment point Measured value Adjustment value Specifications

( In a stable state)
Front Left, Right R6041, R6042 In case below 9 mV 9 mV 12 +/- 3 mV
and Center and R6040 In case 9 - 11 mV Leave it as it is
In case over 11 mV 11 mV
Surround Left R6043, R6044, In case below 6 mV 6 mV 9 +/- 3 mV
Surround Right In case 6 - 8 mV Leave it as it is
Surround Back Left R6045 and R6046 In case over 8 mV 8 mV
Surround Back Right
8. Disconnect the dc voltmeter. Idling currents are stabilized in about

9. Press the STANDBY/ON button to turn the power off. 10 minutes after power on.
10. Disconnect the ac power cord.

TX-SR604/604E/8460
ADJUSTMENT PROCEDURE-2
IDLING CURRENT ADJUSTMENT
<Fig-1>
U15
AMPLIFIER PC BOARD
(NAAF-8911)
SL SR SBL
ID+ ID-
ID+ ID-
ID+ ID-
P6083 R6043 P6084 R6044 P6085 R6045
Test Trimming Test Trimming Test Trimming
point resistor point resistor point resistor
C L R SBR
ID+ ID-
ID+ ID-
ID+ ID-
ID-
ID+
P6080 R6040 P6081 R6041 P6082 R6042 R6046 P6086

Test Trimming Test Trimming Test Trimming Trimming Test
point resistor point resistor point resistor resistor point

marking
marking
Left side
Front side
A802
A803
A801
A800
A660
A815
A650

A817
PACKING PROCEDURE
A661
A806
A804
A805
A807
Front side
A813
A817
A810
A809
A821
A601
(R & L)
A603
Front side
A820
A808
A812
TX
A891
Front Front
A606
-S
Left Left
Front Front
Left Left
SP-B / Zone 2 SP-B / Zone 2
Speaker Cable
Left Left
1
Left Left
R6
Front Front
Right Right
Front Front
Right Right
04
Right Right
2
Right Right
WO&WT only
Surround Surround
(B
Left Left
Surround Surround
)
Left Left
Surround Surround
Right Right
Surround Surround
3
Right Right
Center Center
A655
Center Center
Surround Back Surround Back

Left Left
T Surround Back Surround Back
Left Left
Zone 2 Zone 2
X Left Left
Zone 2 Zone 2
Left Left

-S
Right Right
R Right Right
Zone 2 Zone 2
U007
Right Right
marking
Zone 2 Zone 2
marking
Right Right
A833
60
A814
Right side
Front side
TX
4(
B
WO only
-S
)
A655
R6
0
Keep LABEL(SP Cable) inside
first page of Instruction manual.
A816
4(B
)
A606
TX-SR604/604E/8460
TX-SR604/604E/8460
ONKYO CORPORATION
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8124
ONKYO U.S.A. CORPORATION

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.ch.onkyo.com/ HOMEPAGE
http://www.onkyo.com/

TXSR 604

Uploaded by

Copyright:

Available Formats

TXSR 604

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TXSR 604

Uploaded by

Copyright:

Available Formats

TX-SR604/604E/8460

Ref. No. 3948

AUDIO SUBTITLE RANDOM REPEAT

TX-SR604E Black and Silver models

TX-SR8460 Golden model

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

This symbol located near the fuse indicates that the

Ce symbole indique que le fusible utilise est e lent.

REF NO. PART NAME DESCRIPTION PART NO. REMARKS

2. To initialize the unit

3. To check the version of microprocessor

Downloaded from www.Manualslib.com manuals search engine

4. Press the STANDBY/ON button.

Downloaded from www.Manualslib.com manuals search engine

2. Press the VIDEO 3 button, while " Test - _ " is displayed.

3. Repeatedly press TONE + button until " Test-4-35 " is displayed.

4. Connect the dummy load of 3 ohms to the Front L ch speaker terminal.

5. Connect the dummy load of 1 ohm to the Front L ch speaker terminal.

6. Check other channels according to the same procedure as 4 and 5.

7. Press the STANDBY/ON button.

Downloaded from www.Manualslib.com manuals search engine

2. Press the VIDEO 3 button while " Test - _ " is displayed.

3. Repeatedly press TONE + button until " Test-4-37 " is displayed.

5. Press the STANDBY/ON button.

2. Press the TONE button while" Ver.0.50/05131a " is displayed.

4. Press STANDBY/ON button.

Downloaded from www.Manualslib.com manuals search engine

OPERATION CHECK-4 (1/2)

To set in DSP debug mode

Downloaded from www.Manualslib.com manuals search engine

Trouble Cause Analysis by Debug Mode

Digit no. Symptom on display Cause Check

Downloaded from www.Manualslib.com manuals search engine

EXPLODED VIEW-1 A061

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

ZONE2 LINE OUT

FLASH ROM SD RAM RI

TMS320DA707 MAIN MICOM

Downloaded from www.Manualslib.com manuals search engine

IN3 CB Micro Processor

Downloaded from www.Manualslib.com manuals search engine

HDMI BOARD HDMI OUTPUT

Downloaded from www.Manualslib.com manuals search engine

R5549 INL7 3-OUT

3 102J 42 23 C5561 1.8K

R5553 DATA DGND TRE_L

R5561 Q5503 NE5532 22

Downloaded from www.Manualslib.com manuals search engine

220 3 3.3 Q6226

C5630 1 D6221 D6222

47/50 270 Q5600

GND_TRG 1SS352 1SS352

C5602 2.2K R5622 Q6223 Q6222 GND_E

SBR_OUT 47/50 0 RN1402 RN1402

SBL_OUT Q5602 RN1441

Q5670 R5567 330