Professional Documents
Culture Documents
Fountain
Fountain
A-SUB STRUCTURE
B. SUPER STRUCTURE
FOUNTAIN WORK
A. SUBSTRUCTURE
1. EXCAVATION AND EARTH WORK
1.01 Site clearing and removing the top 200 mm thick soil m2 35.0
1.02 Bulk excavation in ordinary soil to a depth of 1000 mm from
reduced level. m3 35.0
1.07 Fill under hard core with selected materials brought from out side
well rolled and compacted in layers not exceeding 200 mm thick.
m3 17.5
1.08
Cartaway surplus excavated material to appropriate tip m3 35.0
1.09 25cm thick basaltic stone hard core, cosolidated and blinded with
crushed stone. m2 35.0
Total Carried to Summary
2. CONCRETE WORK
2.01 C-5 lean concrete with minimum cement content of 150kg/m3
under footing pad
a) under concrete as floor slab m2 35.0
2.02 Reinforced concrete quality C-30,minimum cement content of 400
kg of cement/m3 filled in to form work and vibrated around rod
reinforcement (formwork and reinforcement measured separately)
3.03
Swimming pool glass and ceramic mosaic tiles. Typically used to
create elaborate murals, glass and ceramic tiles will create an
undersea wonderland. These types of mosaic tile mesh beautifully
internal parts of fountain wall. price shall include all necessary
accessories. m2 121.8
3.04 Brown color ceramic mosaic tiles. Typically used to create
elaborate murals, glass and ceramic tiles will create an undersea
wonderland. These types of mosaic tile mesh beautifully External
parts of fountain wall. price shall include all necessary
accessories. m2 35.0
3.05 20*250mm Black marble coping cut to appropriate size,weathered
& mounted on & including 30mm thick cement mortar(1:3)
bedding ml 25.0
Total Carried to Summary
4. Fountain accessery work
4.1 Centrifugal Pumps m2 78.1
MLX series is a high-flow centrifugal pump with open impeller
design. The hydraulic model is designed with CED to improve the
over-flow performance of low-viscosity particulate materials and
reduce the shear of materials under the premise of ensuring high-
efficiency hydraulic performance. Cut and damage, the pump
casing and liquid contact parts are all made of 304/316L stainless
steel. It is mainly used for the transportation of solid particles and
low-viscosity weak corrosive materials such as juice fermentation
broth, wort and food and beverage juice jam. It can also be used
for general industrial water or drinking water treatment.Flow Flow:
100m3-, Head Head: 40 H/MTemperature Temperature : -80° C
Power power -80KW price shall include all necessary
accessories.
pcs 2.0
4.20 LED130 SERIES – ILLUMINATED FOAM JET RGBW, RGB, Cool
White, Warm White, or Tunable White (3000k to 5000k)
Aerated (foamy) nozzle effect
Stainless steel and cast bronze,30W 12VDC Foot friendly faceplate with
3/8" (10mm) openings allow for drainage and safety RDM - Remote
Device Management enabled Water level dependent price shall include
all necessary accessories.
pcs 2.0
4.3 Flower Jet Three Stage Nozzle
Pipe Size 1 inch
Nozzle Diameter 100 mm
Color Chrome Plated
Pressure 3bar
Type Thread Type
Brand COLORdesign INDIA
Finish Chrome Plated price shall include all necessary accessories. pcs 14.0
Total Carried to Summary