Continuous One Way Slab

DESIGN OF ONE WAY CONTINUOUS SLAB
Enter values in these cells only.

1 Number of spans 4
2 Dimension of slab
L 13.5 m
B 6.5 m
3 Span data
Span 1 L 6.5 m
B 3.04 m
Span 2 L 6.5 m
B 3.35 m
Span 3 L 6.5 m
B 3.35 m
Span 4 L 6.5 m
B 3.04 m
4 Thickness of Supports
End supports 0.3 m
Interior Supports 0.24 m
5 Grade of Concrete fck 20 N/mm2

6 Grade of Steel fy 415 N/mm2
7 Clear Cover 25 mm
8 Design Factors
xumax/d 0.48 N.A. factor 𝑋𝑢𝑚𝑎𝑥/𝑑=700/(1100+0.87∗𝑓𝑦)
Qlim 2.76 M.R. factor
ptlim 0.96 % R/F
9 Effective Length
For end span Lx 3.31 m
Ly 6.8 m
For interior span Lx 3.59 m
Ly 6.8 m
Check Ly/Lx≥2 1 DESIGN AS ONE WAY CONTINUOUS SLAB
10 Approximation of depth
MF 1.5 "Assuming Pt = 0.35%, from Figure 4, Page 38, IS 456(2000)"
For end span 𝑑=𝐿_𝑥/(26∗𝑀𝐹)

d 84.87 mm For continuous slab
For interior span
d 92.05 mm
dassumed 100 mm
φ 10 mm
Dassumed 130 mm
11 Total Factored load calculation(w)
S.Wt. 3.25 kN/m2
F.F. 1.5 kN/m2
L.L. 2 kN/m2
T.L. 6.75 kN/m2

Total factored load w 10.125 kN/m2
Total factored DL Wd 7.125 kN/m2

Total factored IL Wi 3 kN/m2
12 Effective shorter spans Lxeffective:

a. For end span As per clause 22.2 (b), Page:34, IS 456 (2000); the
c/c between supports 3.31 m width of the intermediate supports is less than 1/12 of
the clear span. Hence, the calculations are made as
clear span + d 3.14 m that of simply supported slab.
Lxeff 3.14 m Whichever is smaller of above values
b. For interior span

c/c between supports 3.59 m
clear span + d 3.45 m
Lxeff 3.45 m Whichever is smaller of above values
13 Bending moment (Mu) and Shear force (Vu) calculations
Load type
Location
1 2 Sum (Mu) 𝑀𝑢=𝐶𝑜𝑒𝑓𝑓𝑖𝑐𝑖𝑒𝑛𝑡𝑠∗𝑊𝑑∗ 〖𝑙 _𝑒𝑓𝑓 〗 ^2
A 5.854 2.958 8.81 kNm
C -7.025 -3.287 -10.31 kNm
B 5.300 2.976 8.28 kNm
D -7.067 -3.968 -11.03 kNm
Load type Sum(Vu)

Location 𝑉𝑢=𝐶𝑜𝑒𝑓𝑓𝑖𝑐𝑖𝑒𝑛𝑡𝑠∗𝑊𝑙∗𝑙_𝑒𝑓𝑓
1 2
E 8.949 4.239 13.19 KN
F 13.4235 5.652 19.08 KN
G 12.30488 5.652 17.96 KN
H 12.29063 5.652 17.94 KN
14 Calculation of required effective depth
For calculation of required effective depth, maximum design B.M. is to be considered without considering sign.
Mumax 11.035 kNm

𝑑𝑟𝑒𝑞= √(𝑀𝑢/(𝑄𝑙𝑖𝑚∗𝑏))
dreq 63.28 mm
Check dreq < dassumed 1
dprovided Err:508 mm
Dprovided Err:508 mm
15 Area of main R/F
Ast Spacing Spacing Spacing Ast Ast min 𝐴_𝑠𝑡=(0.5∗𝑓_𝑐𝑘∗𝑏𝑑)/𝑓_𝑦 ×{1− √([1−(4.6∗𝑀_𝑢∗10^6
Location 3d(mm)
Sum (Mu) required Dia of bars req(mm) (mm) provided provided (0.12%)
A 8.812 258.001 8 194.827 300 194.827 190 264.555 156.000
B 8.276 241.428 8 208.200 300 208.200 200 251.327 156.000
At support next to end support (C)

Mu 10.31 KNm
Ast,required 305.05 mm2
Ast,available 257.94 mm2 (in the form of bent-up bars)
Additional Ast,required 47.11 mm2
φ 8 mm
spacing required 1067.03 mm
spacing provided 900 mm c/c
Ast,provided by extra top bars 55.85 mm2
Total Ast,provided 313.79 mm2
Hence provide extra top bars of 8 mm # @900 mm c/c
At other interior supports (D)

Mu 11.03 KNm
Ast,required 328.12 mm2
Ast,available 251.33 mm2 (in the form of bent-up bars)
Additional Ast,required 76.79 mm2
φ 8.00 mm
spacing required 654.58 mm
spacing provided 600.00 mm c/c
Ast,provided by extra top bars 83.78 mm2
Total Ast,provided 335.10 mm2
Hence provide extra top bars of 8 mm # @600 mm c/c
16 Area of distribution steel
Provide 0.15% of gross section for HYSD bars, min R/F = 0.12% of b*D
for MS bars, min R/F = 0.15% of b*D
Ast req 195 mm2
Assume dia of bars 8 mm
Spacing required
s 257.7717 mm c/c
5d 500 mm c/c
450 mm c/c
Spacing required 257.7717 mm c/c
Spacing provided 250 mm c/c
Ast provided 201.062 mm2
17 Check for shear

Vu 19.0755 KN 𝛽=
(0.8∗𝑓𝑐𝑘)/(6.89∗𝑝𝑡)
pt,prov 0.31 %
β 8.23
k 1.30 (as per cl B-5.2.1.1,pg-84 of IS 456-2000) 𝜏𝑐=0.85∗√(0.8∗𝑓𝑐𝑘)∗(√(1+5∗𝛽)−1)/(6∗𝛽)
τc 0.38
Actual τc 0.49
τv 0.19 SAFE
18 Detailling drawings 8 mm # @200 mm c/c alternate bent

8 mm # @250 mm c/c
8 mm # @190 mm c/c +ETB 8 mm # @600 mm c/c 1035 mm 1035 mm
314 mm 690 mm 628 mm
0.3 m 3.04 m 3.35 m 3.35 m 3.04 m 0.3 m
8 mm # @190 mm c/c alternate bent

B.M. Coefficients
Span Moments Support Moments

Type of load Near middle of At Middle of At support next
End span Interior span to end support
A B C
1 DL and LL(Fixed) 0.083 0.0625 -0.1
2 DL and LL(Moving) 0.1 0.083 -0.111
S.F. Coefficients
At Support next to End supportAt all other

At End Support Outer Interior
Type of load Inner supports
Side Side
E F G H
1 DL and LL(Fixed) 0.4 0.6 0.55 0.5
2 DL and LL(Moving) 0.45 0.6 0.6 0.6
For Members of the uniform cross section which supports uniformly distributed load over 3 or mor
which do not refer by more than 15% of the longest, B.M. and S.F. used in design may be obtained
coefficients from these tables.
Support Moments
At other Interior At end
support support
D O
-0.083 0
-0.111 0
At all other
Interior
supports
H
0.5
0.6
ed load over 3 or more spans

sign may be obtained by using

Continuous One Way Slab

Uploaded by

Copyright:

Available Formats

Continuous One Way Slab

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Continuous One Way Slab

Uploaded by

Copyright:

Available Formats

DESIGN OF ONE WAY CONTINUOUS SLAB

Enter values in these cells only.

5 Grade of Concrete fck 20 N/mm2

Check Ly/Lx≥2 1 DESIGN AS ONE WAY CONTINUOUS SLAB

For end span 𝑑=𝐿_𝑥/(26∗𝑀𝐹)

T.L. 6.75 kN/m2

Total factored DL Wd 7.125 kN/m2

12 Effective shorter spans Lxeffective:

Lxeff 3.14 m Whichever is smaller of above values

b. For interior span

Lxeff 3.45 m Whichever is smaller of above values

13 Bending moment (Mu) and Shear force (Vu) calculations

Load type Sum(Vu)

Mumax 11.035 kNm

Check dreq < dassumed 1

15 Area of main R/F

At support next to end support (C)

At other interior supports (D)

Assume dia of bars 8 mm

Spacing required 257.7717 mm c/c

Spacing provided 250 mm c/c

Ast provided 201.062 mm2

17 Check for shear

18 Detailling drawings 8 mm # @200 mm c/c alternate bent

314 mm 690 mm 628 mm

0.3 m 3.04 m 3.35 m 3.35 m 3.04 m 0.3 m

8 mm # @190 mm c/c alternate bent

Span Moments Support Moments

At Support next to End supportAt all other

ed load over 3 or more spans

You might also like