Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 17 views

    HDPE

    Uploaded by

    tech.om

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    HDPE

    Uploaded by

    tech.om
    17 views1 page

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    17 views1 page

    HDPE

    Uploaded by

    tech.om

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    High Density Polyethylene High ESCR GPBM Grade

    Product Description: Recommended Applications:


    HDPE 010DB50 is a High Density Polyethylene HDPE 010DB50 is recommended for following
    manufactured using Lyondell Basell’s Hostalen applications
    Slurry Process with following features:  Containers / Bottles upto 5 ltrs capacities
     
    Provisional Technical Datasheet

    Superior Processability High ESCR Blow Molded Containers


     Superior mechanical properties  Containers for packing of Chemicals,
     High ESCR to suit packaging of Chemicals Pesticides etc

    Typical Properties:
    Tested Properties Test Method UOM Values*

    Resin Properties
    Melt Flow Index (1900C & 5 Kg) ASTM D1238 gm/10 min 1.2
    o 3
    Density @ 23 C ASTM D1505 gm/cm 0.950
    Mechanical Properties
    Tensile Strength @ Yield (Type-IV) ASTM D638 MPa 25
    Elongation @ Break (Type-IV) ASTM D638 % >600
    Notched Izod Impact Strength @ 23 oC ASTM D256 J/m 150
    Flexural Modulus ASTM D790 MPa 900
    Thermal Properties
    o
    Vicat Softening Point (10N) ASTM D1525 C 125
    o
    Heat Deflection Temperature (0.455 Mpa) ASTM D648 C 70
    Environmental Properties
    ESCR (10% Igepal), F50 ASTM D1693 B Hrs >500
    * Typical values not to be construed as specification limits. Values may change without any prior notice.
    * Mechanical Properties tested on compression Molded test specimens.

    o
    Recommended Processing Temperature: 160 – 190 C
    Packaging Information:
    This material is packed and available in raffia bags with net content of 25.0 Kg only. The raffia bags used conforms to the minimum strength requirements of BIS,
    however, customer shall take due care while handling the bag. Prolonged exposure of these bags to sunlight may deteriorate the bag’s performance and cause
    spillage and wastage. IOCL does not warranty loss of material due to poor material handling practices.

    Regulatory Information: Storage & Handling:


    HDPE 010DB50 shall meet “Specification for Polyethylene for safe Prevent HDPE Material from direct exposure to sunlight & heat to avoid quality
    use in contact with Foodstuff, Pharmaceuticals and Drinking water” deterioration. The storage location should be dry, dust free and the storage
    as per IS: 10146-1982. It also confirms to the positive list of temperature should no exceed 50˚C. Non - compliance to these precautionary
    constituents as per IS: 10141-1982. The grade and Additives measures can lead to degradation of the product causing color changes, odor and
    incorporated shall meet with FDA: CFR Title21, 177.1520, Olefin inadequate product performance. It is advised to process HDPE material within 06
    Polymers. months of delivery.

    Disclaimer: IOCL assumes no liability whatsoever in respect of application, processing or any use made of the aforementioned information or products, or any consequence thereof. No liability whatsoever shall attached to
    any of the IOCL companies for any infringement of the rights owned or controlled by a third party in intellectual, industrial or other property by reason of application, processing or use of the afore-mentioned information or
    products by the user.

    Registered Office Address  Contact Address  Contact Details 


    G-9, Aliyavar Jung Marg, Product Application and Development Center (PADC), Tel : +91-180-2526702, 2526708
    Bandra (East), Mumbai – 400051 Near Panipat Naphtha Cracker Complex, Fax : +91-180-2528689
    Maharashtra, India. Village – Baljattan, Panipat – 132140, Haryana, India Web : https://propel.indianoil.in

    00-10/19

    You might also like