3 in 1 Bluetooth 2 4g Wired 2d Wireless Barcode Scanner Manual

Manuals+ — User Manuals Simplified.
Eyoyo 3 in 1 Bluetooth 2.4g-Wired 2d Wireless Barcode

Scanner User Manual
Home » Eyoyo » Eyoyo 3 in 1 Bluetooth 2.4g-Wired 2d Wireless Barcode Scanner User Manual
Contents [ hide
1 Eyoyo 3 in 1 Bluetooth 2.4g-Wired 2d Wireless Barcode
Scanner
2 Specification
3 Quick-start
3.1 Restore defaults
4 Working Mode
5 Pairing operation
5.1 Bluetooth pairing operation
5.2 2.4G pairing operation
5.3 Communication mode
5.4 IOS keyboard
5.5 Vibration & Wired
5.6 Capital & Lowercase
5.7 End character
5.8 Language
6 Data editing
6.1 LED & Buzzer
7 FAQ
8 Appendix ASCLL-Barcode Table
9 Documents / Resources
10 Related Posts
Eyoyo 3 in 1 Bluetooth 2.4g-Wired 2d Wireless Barcode Scanner

Specification
1. Support Bluetooth/2.4G/Wired and can be switched.

2. Support Bluetooth-HID/SPP/BLE and can be switched.
3. Bluetooth HID and 2.4G support long press to switch.
4. Bluetooth: 10 m viewing distance wireless transmission.
5. In Bluetooth mode, Supports all versions of windows.
6. In Bluetooth mode, Supports Mac ,Android, IOS etc.
7. In Bluetooth-offline mode, Double-click to switch reconnect state and match state.
8. 2.4G 100 m viewing distance wireless transmission.
9. Support most USB devices in 2.4G mode.
10. In HID mode, Support multi-Language.
11. Wired mode can be disabled by setting code.
12. Three tips: Buzzer &Indicator &Vibration.
13. 16MB storage.
14. Support Instant upload Mode, storage Mode.
15. Efficient power management, long working hours.
16. Buttons: long life, comfortable, quiet.
17. Support online upgrade.
Press button, the scanner starts, Enter Bluetooth reconnect state, the blue light the green light flashes alternately,
Please double-click ,The scanner enters Bluetooth pairing mode and the blue light flashes quickly, Perform
Bluetooth connection operation, When the Bluetooth connection is successful, the blue light is always on. Switch
to 2.4G mode, the blue light goes out, Connection successful, the green light is always on.
Wire Mode
Insert the cable and it will automatically become wired, Unplug the USB cable, the scanner returns to the previous
mode. Wired function, can be disabled by setting code.
Quick-start
Restore defaults
1. Scan the “Restore defaults”.
Restore defaults
Bluetooth connection
1. Press the button, the buzzer sounds, the scanner starts.

2. Double-click button, The blue light flashing which means in matching mode, Choose the scanner is going to
pair with the host, When the connection is successful, the blue light is always on and the buzzer drops once.
3. The Scanner name: “Scanner XXX” The “XXX” indicates
Bluetooth mode, For example : HID,SPP,BLE.
2.4G connection
When the scanner is in Bluetooth-mode, Insert the 2.4G receiver into the USB, Press the button for 8 seconds or
scan the (Mode switch) setting code, The scanner will switch and match the 2.4G receiver. The middle green light
is on, the buzzer sounds twice, indicating 2.4G connection is successful.
2.4G to Bluetooth-HID
When the scanner is in 2.4G-mode Press the button for 8 seconds or scan the (Mode switch) setting code, The
scanner switches to Bluetooth HID mode and automatically reconnects the last connected Bluetooth device.
Ps: Recommending use 2.4G mode at the PC.
Working Mode
Instant upload Mode *
Barcode data is uploaded to your device.
1. Upload successfully: The buzzer rang “ Di ”.

2. Upload failed: The buzzer rang “ Di-Di-Di ”.
Storage mode
Barcode data is stored in the scanner memory.

Save successfully: The buzzer rang “ Do-Di ”.(2): Save failed: The buzzer range “ Di-Di-Di ”.
Show total storage
Show total number of memory.
Upload Data
After the data is uploaded, the stored barcode data will not be automatically deleted and can be uploaded multiple
times Please upload as close as possible to the receiver, ensure the signal is good, or upload by cable.
Clear data
Clear all data in memory, Please use it with caution!
Pairing operation
Bluetooth pairing operation
1. Scan “Bluetooth HID”(SPP/BLE scans SPP or BLE
Bluetooth HID
2. Scan “Pairing”, the blue light flashing which means in pairing
(Note: At this point, double-click will exit the pairing state.)
Pairing
3. Choose the scanner is going to pair with the host, When the connection is successful, the blue light is always
on and the buzzer drops once.
2.4G pairing operation
1. Scan “2.4G”.
2.4G
2. Scan “Pairing”, the mid-green light flashing which means in pairing.
Pairing
3. Insert 2.4G-Receiver When the connection is successful, the mid-green light is always on and the buzzer drops
twice.
Communication mode
Support Bluetooth -HID/SPP/BLE/2.4G
Bluetooth-HID speed
Note: If the data is lost, Please set the slow speed.
IOS keyboard
Show/hide IOS keyboard

Note: Scan this barcode to show/hide the keyboard in IOS .
Show/hide IOS keyboard double-click –ON*
Show/hide IOS keyboard double-click -OFF
Power and Standby
show battery level
Sound
Vibration & Wired
Vibration ON/OFF
Vibration-ON*
Vibration-OFF
Note: If you do not need vibration, Set OFF and extend the use time.
Wired ON/OFF
Wired-ON*
Wired-OFF
Note: Wired Settings, effective after plug – in.
Capital & Lowercase
Don’t convert *
All Lowercase
All capital
End character
Language
Note: No language, please scan the universal keyboard.

Data editing
1. Hide front/back characters

1. Scan you want “speed-barcode”
Hide front character
Hide back character

Note: “Hide front/back character” can take effect simultaneously.
2. Scan hidden bits.
Cancel this setting, please followed by step 1 .

2. Prefix and suffix
1. Scan you want “prefix or suffix”.
prefix
suffix
Note: “prefix and suffix” can take effect simultaneously.
2. Scan the character barcode you want to add. (appendix).
Note: Up to 32 characters can be added.
Cancel this setting, please followed by step 1 .
LED & Buzzer

1. The middle two LDE instructions
(Bluetooth status light: blue LED 2.4G status light: green LED) Blue OFF, Green flashing 2.4G
pairing/Reconnection status
Pairing successful, Green ON.
Green: OFF, Blue flashing: Bluetooth-HID pairing status
Pairing successful, Blue ON
Green OFF, Blue Slow-flashing: Bluetooth-SPP pairing status
Green OFF, Blue Fast-flashing: Bluetooth-SPP pairing status
“Blue and Green” Alternating flash
Bluetooth-HID Reconnection status.
“Blue and Green” Synchronous slow flashing: update status.
2. Buzzer
Di—:The scanner starts or shutdown.
Di: Successful decoding, connection succeeded. Di—Di— Disconnect.
Do-Di: Save successfully, Scanned wrong setting code Di-Do: Scanned setting code.
Di-Di-Di: Transmission failed, Storage overflow.
Di-Di-Di-Di-Di: Low battery.
FAQ
1. Reconnection & Match (In Bluetooth mode).

In the offline state of Bluetooth HID, double-click can be used to switch the Bluetooth reconnection status and
the Bluetooth matching status. If you don’t want to connect to the last device, double-click the button before the
Bluetooth reconnect succeeds. It will switch to the Bluetooth match state to connect to the new device and
double-click again to switch to the reconnect state.
2. Power-on judgment
After starting up, the mid-blue and mid-green lights flicker alternately, indicating that the scanner is in Bluetooth
HID reconnection state.
After starting up, the mid-green light flashes, and the scanner is in a 2.4g reconnect state
3. Can’t search the scanner
1. Make sure the scanner is in HID-mode.
2. Whether the scanner in matching state- blue light flashing?
4. Bluetooth connected but not upload
1. Whether the scanner set to storage mode, Please set to Instant upload Mode.
2. Whether the scanner set to 2.4G mode (check mid-led status).
3. Please check the Bluetooth mode(HID,SPP,BLE
5. 2.4G connected but not upload
Whether the mid-green light is always on to confirm the connection is successful., Otherwise, please re-pair
the 2.4G receiver, please refer to the 2.4G pairing chapter.
More support, please contact the manufacturer.
Appendix ASCLL-Barcode Table
Documents / Resources
Eyoyo 3 in 1 Bluetooth 2.4g-Wired 2d Wireless Barcode Scanner [pdf] User Manual

3 in 1 Bluetooth 2.4g-Wired 2d Wireless Barcode Scanner, Wireless Barcode Scanner, Barcode
Scanner, Scanner
Manuals+, home privacy

3 in 1 Bluetooth 2 4g Wired 2d Wireless Barcode Scanner Manual

Uploaded by

Copyright:

Available Formats

3 in 1 Bluetooth 2 4g Wired 2d Wireless Barcode Scanner Manual

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3 in 1 Bluetooth 2 4g Wired 2d Wireless Barcode Scanner Manual

Uploaded by

Copyright:

Available Formats

Manuals+ — User Manuals Simpliﬁed.

Eyoyo 3 in 1 Bluetooth 2.4g-Wired 2d Wireless Barcode

Eyoyo 3 in 1 Bluetooth 2.4g-Wired 2d Wireless Barcode Scanner

1. Support Bluetooth/2.4G/Wired and can be switched.

1. Scan the “Restore defaults”.

1. Press the button, the buzzer sounds, the scanner starts.

Ps: Recommending use 2.4G mode at the PC.

Instant upload Mode *

Barcode data is uploaded to your device.

1. Upload successfully: The buzzer rang “ Di ”.

Barcode data is stored in the scanner memory.

Show total storage

Show total number of memory.

Bluetooth pairing operation

1. Scan “Bluetooth HID”(SPP/BLE scans SPP or BLE

2.4G pairing operation

Support Bluetooth -HID/SPP/BLE/2.4G

Note: If the data is lost, Please set the slow speed.

Show/hide IOS keyboard

Show/hide IOS keyboard double-click –ON*

Show/hide IOS keyboard double-click -OFF

Power and Standby

show battery level

Note: Wired Settings, eﬀective after plug – in.

Capital & Lowercase

Note: No language, please scan the universal keyboard.

1. Hide front/back characters

Hide front character

Hide back character

Cancel this setting, please followed by step 1 .

LED & Buzzer

1. Reconnection & Match (In Bluetooth mode).

Eyoyo 3 in 1 Bluetooth 2.4g-Wired 2d Wireless Barcode Scanner [pdf] User Manual

Manuals+, home privacy

You might also like