416D ®

Backhoe Loader

Engine Operating Weight

®
Engine Model Cat 3054C DINA Nominal 6900 kg 15,257 lb
Gross Power (SAE J1995) 58 kW 78 hp Maximum 9800 kg 21,605 lb
Net Power (SAE J1349) 55 kW 74 hp Backhoe
Engine Model (Optional) Cat 3054C DIT Dig Depth Standard 4390 mm 14 ft 5 in
Gross Power (SAE J1995) 63 kW 85 hp Dig Depth Extended 5510 mm 18 ft 1 in
Net Power (SAE J1349) 60 kW 80 hp
 416D Backhoe Loader
The 416D Backhoe Loader is built to provide the most production in the most cost-effective way.

Power Train Backhoe Performance Work Tools

✔ New Cat 3054C DINA and optional High rotation backhoe linkage, A wide range of Caterpillar® Work
3054C DIT engines meet all U.S. excavator-style boom, updated Diagonal Tools are available to meet the needs
EPA Tier 2/EU Stage II emissions Retention System and optional extendible of your job site applications. pg. 6
requirements. Partnered with this stick work together to provide high
new engine, the efficient fuel system productivity. New swing casting
reduces fuel consumption and improves durability. pg. 5
increases lug performance. pg. 4

Customer Support
Your Cat dealer offers a wide range
of services that help you operate longer
with lower costs. pg. 11

Designed for long hours of operation and low

cost production, the 416D features rugged
construction, a spacious work environment,
high rotation backhoe and easy maintenance.
The 416D delivers everything you expect
from a Cat Backhoe Loader.

2
Hydraulics Operator Station Additional Features
The state-of-the-art closed-center, ✔ The 416D operator environment is Standard pilot-operated stabilizer
variable displacement pump and load ergonomically designed to create a controls, counterweights, a flip open
sensing hydraulic system provide high comfortable work area with easy-to-use hood and new color-coded fill caps
forces at any engine speed. pg. 7 machine controls to help reduce fatigue. contribute to the machine’s overall ease
New air duct routings increase operator of serviceability and reliable operation.
comfort in all conditions. pg. 8 pg. 10

✔ New Feature

3
Power Train
New Cat 3054C DINA (Direct Injection Naturally Aspirated) and optional 3054C DIT (Direct
Injection Turbocharged) engines meet all EPA Tier 2/EU Stage 2 emissions requirements.

Transmission. The Caterpillar Power

Shuttle transmission provides four speeds
forward and reverse. Full synchromesh
gears and hydraulically shifted forward
and reverse shuttle clutches allow
direction and travel speed to be changed
on-the-go. A neutral start provision
prevents starting while the shuttle is
engaged.
Ride Control Option. Offers a smooth
ride in all conditions and reduces machine
loping while roading. It also provides
better material retention during load and
carry operations while greatly increasing
operator comfort. The system engages
with the flip of a switch.
New Caterpillar Front Axles. New Cat
heavy-duty front axles are developed
specifically for demanding backhoe
loader applications.
Rear Axles and New Brakes. Heavy-duty
rear axle with self-adjusting inboard
brakes, differential lock and final drives.
New Kevlar brake discs extend service
life, decrease stopping distance and
provide quieter braking.
Two Wheel Drive. New tapered roller
bearings improve kingpin alignment
and more wear resistance to extend
3054C DINA Engine. The new Cat 3054C the life of the front axle and tires.
DINA (Direct Injection Naturally
All Wheel Drive (AWD) Option. Heavy-
Aspirated) 55 kW (74 hp) engine and
duty front drive axle can be engaged
efficient fuel system deliver reliable
at any time by activating the switch on
power with low emissions, increased
the front console. The switch can be
torque rise, excellent fuel economy
activated while the machine is stopped
and traditional Caterpillar durability.
or moving, with or without load. AWD
The Cat 3054C DIT (Direct Injection
features outboard planetary final drives
Turbocharged) 60 kW (80 hp) engine
and improves mobility and loader
is optional.
performance in poor traction conditions.
Starting Aid. Standard thermal starting Air Cleaner. A new dry-type, axial seal
air cleaner with automatic, integrated Brake Mode Selector Switch. The brake
aid system for efficient cold weather
dust ejection system provides more mode selector switch on AWD machines
starting down to –28° C (–20° F).
efficient pre-separation. The 2-stage has three positions: two wheel drive,
Direct Injection Fuel System. Individual air filter incorporates both air cleaner two wheel drive with all wheel braking
unit fuel injectors deliver efficient, and precleaner functions into a single and all wheel drive. The center position
accurate fuel metering, reduced emissions, unit mounted under the hood. provides two wheel drive for better tire
reliable power, higher torque rise and life while roading and engages the
responsive performance. A new water front axle when brakes are applied
separator service indicator ensures the for improved braking performance.
operator is reminded when service is
necessary.

4
Backhoe Performance
High rotation linkage and strong dig forces boost productivity.

New DRS 230 (Diagonal Retention

System). New DRS 230 with wide
adapters provides maximum strength
and improved wear characteristics.
Heavy-duty bucket teeth are attached
with diagonal pins rather than horizontal
pins for easy exchange. The adapters
are stronger as a result of this diagonal
pinning and additional wear material
on the bucket teeth increases durability.
High Rotation Backhoe Linkage. Quick Couplers. Quick Couplers allow
Single pin bucket linkage contributes to for quick attachment of buckets and
best-in-class rotation of 205 degrees for other work tools. The D-Series High
all applications, eliminating the need to Rotation pin grabber design and the
change pin position when moving from C-Series compatible pin grabber allow
loading trucks to vertical wall trenching. buckets to be changed without removing
the bucket pins. Other manufacturers’
Backhoe Boom. The excavator-style
buckets can be coupled with a pin puller
boom features box section fabrication
coupler, one for Case and D-Series
with internal stiffeners for better balance
buckets and one for Deere and D-Series
and weight distribution. The curved
buckets. D-Series quick couplers are
design provides additional clearance
painted black for easy D-Series
over obstacles while digging a trench
identification.
or truck loading. The narrow boom
enhances the viewing area to the bucket
and trench throughout the entire Bucket Line. Cat’s expansive bucket
operating range. line includes rock and coral bucket
designs. All D-Series buckets are
Extendible Stick. This optional backhoe painted black and carry the Cat logo.
attachment replaces the standard stick
and increases reach and dig depth by Bucket Characteristics. The side profile
approximately 1.2 meters (4 feet). has a scalloped edge, similar to an
The extendible stick uses eight self- excavator bucket, for exceptional fill
lubricated, non-metallic wear pads factor characteristics and secure
which can be shimmed or replaced. clamping ability.
Durable wear pad materials increase
wear life in all conditions.
New Backhoe Swing Casting.
Improved with replaceable bushings Lift Eye. An integral lifting eye is a
for durability and serviceability. standard feature of the bucket linkage.

5
Work Tools
Choose from a wide variety of tools designed specifically for the backhoe loader.

416D Work Tools. Cat Work Tools for backhoe loaders extend
the versatility of the machines. Built for performance and
durability, these tools deliver high productivity, long service
life and excellent value:

Backhoe Work Tools

• Standard Duty Bucket
• Heavy Duty Bucket
• Heavy Duty Rock Bucket
• High Capacity Bucket
• Coral Bucket
• Ditch Cleaning Bucket
• Hydraulic Hammer
• Vibratory Plate Compactor
• Auger
• Ripper
• Thumb

Loader Work Tools

• General Purpose Bucket
• Multi Purpose Bucket
• Light Material Bucket
• Penetration Bucket
• Multi Purpose Bucket with Fold-Over Forks
• Loader Forks

6
Hydraulics
The load-sensing, closed-center system provides power where you need it, when you need it.

Hydraulic System. The load-sensing,

variable flow hydraulic system senses
work demand and adjusts flow and
pressure to match. This allows full
hydraulic forces at any engine speed
for delicate jobs in tight areas.
Hydraulic Pump. Closed-center
implement valves, with pressure
compensation for reduced lever effort,
signal hydraulic system requirements
to a control valve located on the pump.
This valve controls the pump to deliver
the flow and pressure necessary to
fulfill the work tool demands.
Dual Setting Torque Limiter. The variable
displacement pump provides better
performance in both backhoe and loader
operations through a dual setting torque
limiter. It automatically optimizes power
to the hydraulic system during backhoe
operations and manages the power
balance between the loader hydraulic
circuit and the drive train during front
loader operations.
XT-3 ES Hoses. Improved bend radius
and abrasion resistance provide reliable
long life in the toughest applications.
Made of four overlapping, insulated
wire spiral wraps bonded together for
durability, XT-3 ES (Enhanced Spiral)
Couplings. XT-3 ES hoses are combined Clamps and Bushings. Metal clamps
hoses exceed SAE certification standards.
with Caterpillar couplings and O-ring face with rubber bushings are used at hose
The hose routing protects them from
seal fittings to provide a leak-free system. attachment points to eliminate metal-
work damage, and hose failure downtime
to-metal contact.
is substantially reduced.

7
Operator Station
Designed for ease of operation and to maximize efficiency and productivity.

416D Utility Plus Cab

8
Comfortable Work Environment. Utility Plus Cab with A/C. Includes an air HVAC System. The heating, ventilation
The 416D operator station incorporates suspension cloth seat, air conditioning, and air conditioning system main
many features for operator comfort two doors with opening glass, a radio components are located near the floor
and productivity. The ROPS canopy ready headliner, 12-volt power supply, and improvements have been made in
is standard on the 416D. a left side storage console with drink air circulation, providing added comfort
holders, tilt steering wheel, heater and and increased defrost capabilities in the
ROPS Canopy. Includes air suspension
floor mats. Utility and Utility Plus cabs. New air duct
vinyl seat, floor mat, fixed steering
routings further increase operator comfort.
column and external power receptacle.
Machine Controls. Switches are located
New ROPS Canopy Plus. Includes air
at operator level and the boom lock and
suspension vinyl seat, tilt steering
pilot-operated stabilizer controls, which
wheel, 12-volt power supply, front
provide low effort and fine modulation,
windshield and wiper/washer system,
are within easy reach. White-faced
phone clip, left side storage space with
gauges are easier to read.
a lockable compartment, drink holders
and floor mats. Backhoe Controls. Four mechanical
control patterns are available: two-lever
Utility Cab. Includes an air suspension
excavator, two-lever backhoe and three-
cloth seat, left side door, a standard
or four-lever foot swing. The linkage
heater and floor mats.
design reduces lever efforts, particularly
Utility Plus Cab. Includes an air with the foot swing control pattern.
suspension cloth seat, two doors with
Viewing Area. The narrow boom
opening glass, a radio ready headliner,
enhances the rear viewing area.
12-volt power supply, a left side storage
The sloping front hood and divergent
console with drink holders, tilt steering
Seats. Two seat options are available: lift arms allow the operator to see more
wheel, heater and floor mats.
air suspension vinyl and air suspension of the forward work area and loader
fabric. Both feature improved contour attachments.
seat cushions with an air adjustment
mechanism that controls the seat height
with the push of a button, providing
greater range and superior ride.

9
Additional Features
Standard pilot-operated stabilizer controls and other benefits contribute to the ease
of serviceability, function and efficiency of the 416D.

Pilot Operated Stabilizer Controls.

These provide low effort and fine
modulation control. The stabilizer controls
are within easy reach on the operator’s
side when operating the backhoe.

Stackable Counterweights. Allow easy Fuel Tank. Large capacity tank located
adjustment of weight distribution without on the frame’s left side is lockable and
having to completely replace an existing includes a replaceable, bolt-on step.
Color-coded Filter Caps
counterweight.
Flip-Open Hood. The flip-open hood
Tool and Battery Box. Spacious,
opens easily and provides convenient
convenient and secure tool storage
access to all engine check points from
location.
the left side of the machine. Fill caps
are color-coded for easy identification.

10
Customer Support
Cat dealer services help you operate longer with lower costs.

Machine Selection. Make detailed

comparisons of the machines under
consideration before purchase. You can
also customize the machine that is right
for you. Go on-line anytime to review
the full range of features and options
available using the Build and Quote
applications on your dealer’s website
or www.Cat.com.
Purchase. Look past initial price.
Consider the financing options available
as well as day-to-day operating costs.
Look at dealer services that can be
included in the cost of the machine
to yield lower equipment owning
and operating costs over the long run.
Customer Support Agreements.
Cat dealers offer a variety of product
support agreements and work with
customers to develop a plan that best
meets specific needs. These plans can
cover the entire machine, including
attachments, to help protect the
customer’s investment.
Product Support. You will find nearly
all parts at our dealer parts counter.
Cat dealers use a worldwide computer
network to find in-stock parts to
minimize machine downtime. Save
money with genuine Cat Reman parts.
Maintenance Services. Choose from Replacement. Repair, rebuild or
You receive the same warranty and
your dealer’s range of maintenance replace? Your Cat dealer can help you
reliability as new products at cost
services when you purchase your evaluate the cost involved so you can
savings of 40 to 70 percent.
machine. Repair option programs make the right choice.
Operation. Improving operating guarantee the cost of repairs up front.
SM
techniques can boost your profits. Diagnostic programs such as S•O•S
Your Cat dealer has training videotapes, and Coolant Sampling and Technical
literature and other ideas to help you Analysis help you avoid unscheduled
increase productivity. repairs.

11
Engine Backhoe

Engine Model Cat 3054C DINA Dig Depth

Gross Power (SAE J1995) 58 kW 78 hp Standard 4390 mm 14 ft 5 in
ISO 14396 57 kW 76 hp E-Stick Retracted 4465 mm 14 ft 8 in
Net Power (SAE J1349) 55 kW 74 hp E-Stick Extended 5510 mm 18 ft 1 in
ISO 9249 56 kW 75 hp Reach from Swing Pivot
EEC 80/1269 56 kW 75 hp Standard 5650 mm 18 ft 6 in
DIN 700200 78 PS E-Stick Retracted 5705 mm 18 ft 9 in
Bore 103 mm 4.06 in E-Stick Extended 6675 mm 21 ft 11 in
Stroke 127 mm 5 in Bucket Rotation 205º
Displacement 4.2 L 258 in3 Bucket Dig Force
Engine Model (Optional) Cat 3054C DIT Standard 52 kN 11,702 lb
Gross Power (SAE J1996) 63 kW 85 hp E-Stick Retracted 51.6 kN 11,599 lb
ISO 14396 62 kW 83 hp E-Stick Extended 51.6 kN 11,599 lb
Net Power (SAE J1349) 60 kW 80 hp Stick Dig Force
ISO 9249 61 kW 81 hp Standard 34.9 kN 7,841 lb
EEC 80/1269 61 kW 81 hp E-Stick Retracted 34.2 kN 7,693 lb
DIN 700200 87 PS E-Stick Extended 25.2 kN 5,661 lb
Bore 105 mm 4.13 in Stick Lift @ 1219 mm (4 ft)
Stroke 127 mm 5 in Standard 4448 kg 9,807 lb
Displacement 4.4 L 268 in3 E-Stick Retracted 3436 kg 7,574 lb
Net Torque Rise @ 1400 rpm — 27 % E-Stick Extended 1564 kg 3,448 lb
Standard Loading Height 3613 mm 11 ft 10 in
Net Torque Rise @ 1400 rpm — 34 % Loading Reach 1732 mm 5 ft 8 in
Optional Transmission, AWD, 18.2 L 4.8 gal
Net Peak Torque @ 1400 rpm — 296 N•m 219 lb ft Power Shuttle
Standard
Net Peak Torque @ 1400 rpm — 347 N•m 256 lb ft
Optional Operating Specifications — Backhoe
• The net power ratings apply at 2200 rpm when tested under
the specified conditions for the specified standard. Turning Circle: outside
• Net Torque Rise meets SAE J1349. Front Wheels 8m 26 ft 4 in
Widest Loader Bucket 10.6 m 34 ft 10 in
• ISO 5010.
Weights • 2WD, AWD (inner wheel not braked).
Operating Weight
Nominal 6900 kg 15,257 lb
Loader
Maximum 9800 kg 21,605 lb
Counterweights, Base 145 kg 320 lb Bucket Capacity — 0.96 m3 1.25 yd3
• Bumper (16 kg/35 lb) is standard with all units. General Purpose
• Total gross machine weight not to exceed 9800 kg (21,605 lb). Bucket Width — General Purpose 2262 mm 89 in
Dump Height @ Max Angle
Single-tilt 2544 mm 8 ft 4 in
Dump Reach @ Max Angle 835 mm 2 ft 9 in
Dig Depth Single-tilt 135 mm 5 in
Lift Capacity @ Full Height 2400 kg 5,292 lb
Single-tilt
Bucket Breakout Force — 37.9 kN 8,524 lb
Single-tilt

12 416D Backhoe Loader specifications

Hydraulic System Service Refills

Circuit Type Load-sensing, Cooling System

closed-center A/C 15.9 L 4.2 gal
Pump Capacity (@ 2200 rpm) 139 L/min 37 gal/min High-Ambient 16.7 L 4.4 gal
System Pressure 20 685 kPa 3,000 psi Fuel Tank 128.7 L 34 gal
Pump Type Variable flow, axial-piston Engine Oil w/Filter 7.6 L 2 gal
Steering Type Front wheel Transmission, 2WD, 15.1 L 4 gal
Power Steering Hydrostatic Power Shuttle
2WD Cylinder Rear Axle 24.2 L 6.4 gal
Bore 70 mm 2.75 in Front Axle
Stroke 224 mm 8.8 in AWD 7.6 L 2 gal
Rod Dia. 44 mm 1.75 in Planetaries 0.8 L 0.2 gal
AWD Cylinder Hydraulic System 79 L 21 gal
Bore 65 mm 2.56 in Hydraulic Tank 38 L 10 gal
Stroke 211 mm 8.3 in
Rod Dia. 36 mm 1.42 in
Brake System Inboard, oil-immersed Axle Ratings

Front Axle
Brakes 2WD, Static 13 765 kg 30,319 lb
2WD, Dynamic 3170 kg 6,983 lb
• Inboard, oil-immersed, hydraulically-actuated, multiple discs AWD, Static 12 271 kg 27,029 lb
on final drive input shaft. AWD, Dynamic 3170 kg 6,983 lb
• Self-adjusting and completely enclosed and sealed. Rear Axle
• Foot-operated brake pedals can be interlocked for roading. Static 27 800 kg 61,233 lb
Dynamic 9270 kg 20,418 lb
• Parking/secondary brakes are independent of the service
brake system. Parking brake is mechanically applied through • AWD and 2WD axles are pendulum mounted and permanently
an adjustable hand lever located on the right console. sealed and lubricated, requiring no daily maintenance.
Also features double-acting steering cylinder with 50°
steering angle for increased maneuverability. Oscillation 11°
Power Train each direction from centerline.

Power-Shuttle, Forward 1st 5.8 kph 3.6 mph

Forward 2nd 9.3 kph 5.8 mph
Forward 3rd 19.2 kph 12 mph
Forward 4th 32.8 kph 20.4 mph
Power-Shuttle, Reverse 1st 5.8 kph 3.6 mph
Reverse 2nd 9.3 kph 5.8 mph
Reverse 3rd 19.2 kph 12 mph
Reverse 4th 32.8 kph 20.4 mph
• Conveniently placed, hand operated lever provides instant
direction changes between forward and reverse through
power hydraulic clutches.
• Torque converter free-wheel clutch allows the converter
stator to free-wheel during high speed, low torque
conditions, such as roading.
• Single stage, 2.63:1 stall ratio.
• Travel speeds of two wheel drive backhoe loader at full
throttle, when equipped with 19.5  24 rear tires.

416D Backhoe Loader specifications 13

Standards Engine Power Rating Conditions

Steering • Based on standard air conditions of 25° C (77° F) and 99 kPa

• Steering system meets secondary system roading (29.32 in) dry barometer.
regulations including ISO 5010. • Used 35° API gravity fuel having an LHV of 42,780 kJ/kg
(18,390 BTU/lb) when used at 30° C(86° F) (reference a fuel
ROPS/FOPS density of 838.9 g/L [7.001 lb/gal]).
• ROPS (Rollover Protective Structure) offered by Caterpillar • Net power advertised is the power available at the flywheel
for this machine meets ROPS criteria SAE J1040 MAY 94 and when the engine is equipped with fan, air cleaner, muffler
ISO 3471:1994. FOPS (Falling Objects Protective Structure) and alternator.
meets criteria SAE J/ISO 3449 APR98 LEVEL II and • No derating required up to 2286 m (7,500 ft)
ISO 3449:1992 LEVEL II.

Cab
Engine Features
• When properly installed and maintained, the enclosed
cab offered by Caterpillar meets all OSHA and MSHA • Dry-type, axial seal air cleaner with automatic, integrated
requirements for operator sound exposure limits in effect dust ejection system provides more efficient pre-separation.
at the time of manufacture. When tested with doors and Rolled air filters allow consistent linear flow with reduced
windows closed and measured according to ANSI/SAE J1166, installation space.
the operator sound exposure Leq (equivalent sound pressure
level) is 78.5 dB(A). • Three-ring pistons made of lightweight, silicon/aluminum
alloy for strength and maximum thermal conductivity.
• The exterior sound pressure level for the standard machine
measured at a distance specified in SAE J88, mid-gear- • Forged chrome/molybdenum-steel crankshaft with
moving operation is 73.0 dB(A). crankshaft with either induction hardened or nitro-
carburized journals.
Brakes • Front and rear crankshaft oil seals are “lip” type Viton and
PTFE designs featuring an integral dust lip.
• Brakes meet the following standards: SAE J1473 and
• Heat resistant, silicone-chrome steel intake and STELLITE-
ISO 3450 requirements.
faced exhaust valves provide long life.
• Cylinder block is high strength, cast iron alloy of deep skirt,
monobloc design for increased strength and long life.
Tires • Cylinder head is high strength, cast iron alloy construction
Tubeless, nylon, loader-design tires. with extra duty wall and deck thickness. Intake and exhaust
ports are precision cast to promote optimum gas flow.
Ply • Direct injection fuel system provides accurate fuel delivery
Type Size Rating and remote mounted electric lift pump improves serviceability.
2WD Bias • Self-priming electric lift pump for improved cold start
Front 11L x 16 12 capability and easy filter changes.
Rear 19.5 x 24 10 • One filter fuel system reduces owning & operating costs.
4WD Bias • Direct electric, 12-volt starting and charging system with
Front 12.5/80 x 18 10 880 CCA Group 31 maintenance free battery.
Rear 19.5 x 24 10 • Standard glow plug starting aid system for efficient cold
4WD Radial weather starting.
Front 340/80 x R18 radial • High contact ratio/gear train, peripheral fixed isolated top
Rear 19.5 x 24 radial cover and open deck block design reduce bare engine noise.
4WD Combination • Higher low end torque for better engine/machine performance.
Front 340/80 x R18 radial
Rear 19.5 x 24 10

14 416D Backhoe Loader specifications

Standard Duty Buckets Heavy Duty Buckets
With weld-on adapters and pin-on teeth. With weld-on adapters and pin-on teeth.

Width Capacities SAE Weight No. of Width Capacities SAE Weight No. of
(mm/in) (liters/ft3) (kg/lb) Teeth (mm/in) (liters/ft3) (kg/lb) Teeth
305/12 78/2.8 97/213 3 305/12 78/2.8 105/231 3
457/18 118/4.2 115/253 4 406/16 105/3.7 127/279 3
610/24 175/6.2 132/290 5 457/18 118/4.2 129/284 4
762/30 233/8.2 147/323 5 610/24 175/6.2 151/332 5
914/36 292/10.3 165/363 6 762/30 233/8.2 167/367 5
914/36 292/10.3 189/416 6

High Capacity Buckets Heavy Duty Rock Buckets

With weld-on adapters and pin-on teeth. With weld-on adapters and pin-on teeth.

Width Capacities SAE Weight No. of Width Capacities SAE Weight No. of
(mm/in) (liters/ft3) (kg/lb) Teeth (mm/in) (liters/ft3) (kg/lb) Teeth
457/18 180/6.4 146/321 4 305/12 70/2.5 120/265 3
610/24 240/8.5 171/376 5 457/18 127/4.5 150/331 4
762/30 320/11.3 195/429 5 610/24 198/7.0 175/386 5
914/36 380/13.4 214/471 6 762/30 255/9.5 195/430 5
914/36 311/11.5 210/463 6

Counterweights

Minimum Counterweight Recommendations — Standard Stick

Loader Bucket Power Train kg lb
GP 2WD 355 780
GP AWD 250 550
MP 2WD/AWD bumper bumper
MP with fold-over forks 2WD/AWD bumper bumper

Minimum Counterweight Recommendations — Extendible Stick

Loader Bucket Power Train kg lb
GP 2WD 570 1,250
GP AWD 570 1,250
MP 2WD 250 550
MP AWD 145 320
MP with fold-over forks 2WD bumper bumper
MP with fold-over forks AWD bumper bumper

Total gross vehicle weight not to exceed 9800 kg/21,605 lb.

416D Backhoe Loader specifications 15

Machine Dimensions
Single-Tilt Loader
General Purpose General Purpose Multi Purpose
(0.76 m3/1.0 yd3) (0.96 m3/1.25 yd3) (0.96 m3/1.25 yd3)
(1) Overall transport length 6949 mm/22 ft 10 in 7019 mm/23 ft 0 in 6974 mm/22 ft 11 in
Overall length
(loader on ground) 6929 mm/22 ft 9 in 6999 mm/23 ft 0 in 6954 mm/22 ft 10 in
(2) Overall transport height
(standard stick) 3585 mm/11 ft 9 in 3585 mm/11 ft 9 in 3585 mm/11 ft 9 in
Overall transport height
(extendible stick) 3590 mm/11 ft 9 in 3590 mm/11 ft 9 in 3590 mm/11 ft 9 in
Overall width 2352 mm/7 ft 9 in 2352 mm/7 ft 9 in 2352 mm/7 ft 9 in
(3) Height to top
of cab/canopy 2770 mm/9 ft 1 in 2770 mm/9 ft 1 in 2770 mm/9 ft 1 in
(4) Height to top
of exhaust stack 2670 mm/8 ft 9 in 2670 mm/8 ft 9 in 2670 mm/8 ft 9 in
Height to loader
hinge pin (transport) 510 mm/1 ft 8 in 510 mm/1 ft 8 in 510 mm/1 ft 8 in
Ground clearance
(minimum) 297 mm/1 ft 0 in 297 mm/1 ft 0 in 297 mm/1 ft 0 in
(5) Rear axle centerline
to front grill 2660 mm/8 ft 9 in 2660 mm/8 ft 9 in 2660 mm/8 ft 9 in
Front wheel tread gauge 1871 mm/6 ft 2 in 1871 mm/6 ft 2 in 1871 mm/6 ft 2 in
Rear wheel tread gauge 1714 mm/5 ft 8 in 1714 mm/5 ft 8 in 1714 mm/5 ft 8 in
(6) Wheelbase
2WD/AWD 2100 mm/6 ft 11 in 2100 mm/6 ft 11 in 2100 mm/6 ft 11 in

Loader Bucket Dimensions and Performance

Single-Tilt Loader
General Purpose General Purpose Multi Purpose
(0.76 m3/1.0 yd3) (0.96 m3/1.25 yd3) (0.96 m3/1.25 yd3)
Capacity (SAE) rated 0.76 m3/1.0 yd3 0.96 m3/1.25 yd3 0.96 m3/1.25 yd3
Width 2262 mm/7 ft 5 in 2262 mm/7 ft 5 in 2262 mm/7 ft 5 in
Lift capacity
at maximum height 2473 kg/5,453 lb 2400 kg/5,292 lb 2240 kg/4,938 lb
Breakout force 40.0 kN/8,980 lb 37.9 kN/8,524 lb 37.5 kN/8,429 lb
(7) Maximum hinge pin height 3266 mm/10 ft 9 in 3266 mm/10 ft 9 in 3266 mm/10 ft 9 in
(8) Dump angle at full height 43° 43° 43°
Dump height at maximum angle 2621 mm/8 ft 7 in 2544 mm/8 ft 4 in 2609 mm/8 ft 7 in
(9) Dump reach at maximum angle 753 mm/2 ft 6 in 835 mm/2 ft 9 in 721 mm/2 ft 4 in
(10) Maximum bucket rollback
at ground level 40° 40° 40°
(11) Digging depth 135 mm/5 in 135 mm/5 in 166 mm/6 in
Maximum grading angle 110° 106° 110°
Width of dozer cutting edge N/A N/A 2406 mm/7 ft 11 in
(12) Grill to bucket cutting edge,
carry position 1474 mm/4 ft 10 in 1548 mm/5 ft 1 in 1501 mm/4 ft 11 in
(13) Maximum operating height 3996 mm/13 ft 1 in 4146 mm/13 ft 7 in 4174 mm/13 ft 8 in
Jaw opening maximum N/A N/A 790 mm/2 ft 7 in
Bucket jaw clamping force N/A N/A 50.6 kN/11.385 lb
Weight (does not include
teeth or forks) 380 kg/838 lb 428 kg/944 lb 659 kg/1,453 lb

16 416D Backhoe Loader specifications

Backhoe Dimensions and Performance
Extendible Stick Extendible Stick
Standard Stick Retracted Extended
(14) Digging depth, SAE (max) 4390 mm/14 ft 5 in 4465 mm/14 ft 8 in 5510 mm/18 ft 1 in
(15) Digging depth, 2 ft flat bottom 4362 mm/14 ft 4 in 4432 mm/14 ft 7 in 5474 mm/18 ft 0 in
Reach from rear axle centerline
at ground line 6740 mm/22 ft 1 in 6795 mm/22 ft 4 in 7765 mm/25 ft 6 in
(16) Reach from swing pivot
at ground line 5650 mm/18 ft 6 in 5705 mm/18 ft 9 in 6675 mm/21 ft 11 in
Maximum operating height 5450 mm/17 ft 11 in 5470 mm/17 ft 11 in 6140 mm/20 ft 2 in
Loading height 3613 mm/11 ft 10 in 3630 mm/11 ft 11 in 4175 mm/13 ft 8 in
(17) Loading reach 1732 mm/5 ft 8 in 1819 mm/6 ft 0 in 2736 mm/9 ft 0 in
Swing arc 180° 180° 180°
Bucket rotation 205° 205° 205°
(18) Stabilizer spread, operating position
(center of pad) 3219 mm/10 ft 7 in 3219 mm/10 ft 7 in 3219 mm/10 ft 7 in
(19) Stabilizer spread, operating position
(outside edge of pad) 3689 mm/12 ft 1 in 3689 mm/12 ft 1 in 3689 mm/12 ft 1 in
Stabilizer spread, transport position 2352 mm/7 ft 9 in 2352 mm/7 ft 9 in 2352 mm/7 ft 9 in
Bucket dig force 52.0 kN/11,702 lb 51.6 kN/11,599 lb 51.6 kN/11,599 lb
Stick dig force 34.9 kN/7,841 lb 34.2 kN/7,693 lb 25.2 kN/5,661 lb

Single-Tilt Loader

3
4

5 12
1

2
3
8
13
7

18 9

19

10

6 11
Dimensions and performance
specifications shown are for
machines equipped with
11L x 16 (10 PR) front tires,
19.5 x 24 (10 PR) rear tires, 14 15
ROPS canopy, standard stick
17
with 24-inch standard-duty
bucket, and 1.0 yd3 loader 16
bucket and standard
equipment unless otherwise
specified.

416D Backhoe Loader specifications 17

Backhoe Lift Capacity

Cat 416D Standard Stick

KEY FEET METERS
A — Boom lift kg lb 22
B — Stick lift kg lb 20
6
18

16 5
1086 2,394
1281 2,824 14
2056 4,534
4
1344 2,964 2156 4,754 12

1325 2,921 2044 4,507 10

3
1284 2,831 2104 4,638 8

1237 2,728 2413 5,319 6 2

1191 2,625 4
4817 10,620
1
1146 2,526 2
B
1105 2,435 0 0

1067 2,353 -2
A -1
1035 2,282 -4

1009 2,225 -6
-2
996 2,195 -8

1016 2,240 -10 -3

1120 2,469
-12
-4
-14

-16
-5
-18
FEET 22 20 18 16 14 12 10 8 6 4 2 0 -2

METERS 6 5 4 3 2 1 0 -1

Cat 416D Extendible Stick — Retracted Cat 416D Extendible Stick — Extended
FEET METERS FEET METERS
22 22

20 20
6 6
18 18
515 1,134
16 5 688 1,516 16 5
946 2,085
1032 2,275
1134 2,500 14 787 1,736 1092 2,408 14
1880 4,145 4 4
1196 2,637 1994 4,397 12 822 1,813 1262 2,783 12

1181 2,603 1891 4,169 10 830 1,830 1306 2,879 10

3 3
1143 2,520 1941 4,279 8 825 1,818 1321 2,913 8

1099 2,423 2203 4,856 6 2 813 1,791 1395 3,075 6 2

1054 2,323 4 798 1,758 1564 3,448 4

1 1
1010 2,227 4830 10,648 2 2
781 1,722 1971 4,346
B 5211 11,487
970 2,138 0 0 764 1,685 0 0
932 2,055 -2
B
749 1,652 -2
A -1 -1
899 1,983 -4 736 1,623 -4

873 1,924 -6 727 1,603

A -6
-2 -2
856 1,887 -8 723 1,595 -8

867 1,911 -10 -3 730 1,610 -10 -3

981 2,163
-12 762 1,679 -12
-4 -4
-14 895 1,973 -14

-16 -16
-5 -5
-18 -18
FEET 22 20 18 16 14 12 10 8 6 4 2 0 -2 FEET 24 22 20 18 16 14 12 10 8 6 4 2 0 -2

METERS 6 5 4 3 2 1 0 -1 METERS 7 6 5 4 3 2 1 0 -1

Lift capacities are over-end values. Machine equipped with 2WD, OROPS, 0.76 m3 (1.0 yd3) general-purpose loader bucket, 610 mm (24 in) standard duty
backhoe bucket and 355 kg (780 lb) counterweight. Extendible stick includes 567 kg (1,250 lb) counterweight.

18 416D Backhoe Loader specifications

Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for details.

Air cleaner Grill, front with bumpers

Alarm, back-up Ground line fuel fill
Alarm, audible system fault Hydraulic hose, XT-3 ES
Alternator, 120-amp, 12-volt Hydraulic oil cooler
Axle, pendulum mount (front) Indicators
Backhoe, center pivot, excavator-style with two lever Air cleaner service, water separator service, brake on,
mechanical controls engine coolant, hydraulic oil level sight gauge, oil pressure
Battery, maintenance-free, 880 CCA Instrument panel lights
Boom transport lock Key start/stop system
Brace, lift cylinder Lights, working (2 front, 2 rear)
Brake, secondary parking Loader, self-leveling, return-to-dig and transmission
Brakes, oil disk, dual pedals, interlock disconnect switch
Bucket level indicator Mirror, rearview
Canopy, ROPS/FOPS Power receptacle, 12V, external
Coat hook Power steering, hydrostatic
Coolant/Antifreeze, extended life Rubber impact strips on radiator guard
Counterweight, bumper Seat belt, retractable (51 mm/2 in)
Differential lock Stabilizer shoes, grouser style
Engine, Cat 3054C DINA (Direct Injection Naturally Aspirated) Seat, air suspension with armrest
Engine enclosure Stabilizer controls, pilot operated
Face seals, O-ring Starting system, thermal starting aid
Fan, suction and guard Stop and tail lights (2)
Fast reversing shuttle, all gears Swing transport lock
Fenders, rear Tires, see page 14
Filters, spin-on fuel Toolbox, external, lockable
Engine oil, transmission oil, water separator, hydraulic fluid Torque converter
Flashing hazard/signal lights Throttles, hand and foot
Floor mat Transmission, four speed, syncromesh
Gauges Transmission neutralizer switch
Coolant temperature, fuel level, tachometer, hour meter, Transport tie-downs
torque converter oil temperature Warning horn, electric

416D Backhoe Loader specifications 19

Optional Equipment
With approximate change in operating weight (kg/lb).

Attachments, backhoe Canopy Plus, ROPS with Hydraulic valves, backhoe

Mechanical Quick Coupler front windshield and Auxiliary valve
D-Series Buckets . . . . . . . . . .75/165 wiper/washer system . . . . . . .13.6/30 (standard stick) . . . . . . . . . . . . .5/11
C-Series buckets . . . . . . . . . .75/165 Cat 3054C DIT engine Auxiliary valve
D and Deere buckets . . . . . . .75/165 (optional 80 HP net) . . . . . . . . . .5/10 (extendible stick) . . . . . . . . . . . .5/11
D and Case buckets . . . . . . . .80/176 Coolant, additional protection Hydraulic lines
Attachments, front loader (single tilt) (–50º C/–58º F) . . . . . . . . . . . . . . .0/0 Auxiliary, two-way (to boom) . .10/22
General-purpose buckets Counterweights Universal, one-way (to stick) . .45/99
0.76 m3/1.0 yd3 . . . . . . . . . . . . . . . .* Base . . . . . . . . . . . . . . . . . . . .145/320 Quick disconnects . . . . . . . . . . . . . . .2/4
0.96 m3/1.25 yd3 . . . . . . . .52.16/115 Stackable Lights
Multi-purpose bucket One . . . . . . . . . . . . . . . . . . .105/230 Working, additional
0.96 m3/1.25 yd3 . . . . . . . .283.5/625 Two . . . . . . . . . . . . . . . . . . .249/550 (2 front, 2 rear) . . . . . . . . . . . . . .3/7
0.96 m3/1.25 yd3 w/forks . .454/1000 (Base + one 105/230 section) Power receptacle,
Axle, front Three . . . . . . . . . . . . . . . . .458/1010 12 volt, internal . . . . . . . . . . . . . .0.2/1
All-wheel drive with (Base + two 105/230 sections) Ride Control . . . . . . . . . . . . . . . . .25/55
driveshaft guard . . . . . . . . .135/298 Also available . . . . . . . . . . .567/1250 Rotating beacon
Backhoe controls (Base + one 105/230 section Fixed mounted . . . . . . . . . . . . . . .5/11
Excavator pattern . . . . . . . . . . . . . .4/9 and one 317/700 section) Magnetic mounted . . . . . . . . . . . .5/11
Foot swing, 3 or 4 lever . . . . . . .12/26 Cutting edge, bolt-on Stabilizers, available with guards
Battery, additional, 880 CCA . . . .27/60 Two piece . . . . . . . . . . . . . . . .70/154 Street pads, rubber (set of 4) . . .37/82
Cab, Utility . . . . . . . . . . . . . . . .225/495 Fenders, AWD, front . . . . . . . . . . 12/26 Reversible pads . . . . . . . . . . . . .38/84
Cab, Utility Plus . . . . . . . . . .233.6/515 Guards Stick, extendible . . . . . . . . . . . .245/540
Includes radio-ready headliner, AWD driveshaft . . . . . . . . . . . .29/64 Teeth, loader bucket . . . . . . . . . . .45/99
storage console, right side door, Stabilizer, rock . . . . . . . . . . . . . .30/65 Vandalism protection
internal and external power High ambient cooling package . . . . .2/4 Gauge cover . . . . . . . . . . . . . . . . . .1/2
receptacles, and tilt steering wheel Hydraulic valves, loader Padlocks . . . . . . . . . . . . . . . . . . . . .1/2
Cab, Utility Plus with 3rd valve for MP . . . . . . . . . . . .27/60 Hood lock . . . . . . . . . . . . . . . . . . .0/0
air conditioning . . . . . . . . . . .279/614

*Included in base machine weight

20 416D Backhoe Loader specifications

Notes

416D Backhoe Loader specifications 21

Notes

22 416D Backhoe Loader specifications

Notes

416D Backhoe Loader specifications 23

416D Backhoe Loader

For more complete information on Cat products, dealer services,

and industry solutions, visit us on the web at www.CAT.com

© 2004 Caterpillar
Printed in U.S.A.

AEHQ5576 (2-04) Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment.
Replaces AEHQ5419 See your Caterpillar dealer for available options.