The document describes a bidirectional transient voltage suppressor (TVS) device. It protects 5V circuits from transients like ESD and surge. The TVS uses cell clamping to protect lines during events. It is small and suitable for mobile and computer applications.
The document describes a bidirectional transient voltage suppressor (TVS) device. It protects 5V circuits from transients like ESD and surge. The TVS uses cell clamping to protect lines during events. It is small and suitable for mobile and computer applications.
The document describes a bidirectional transient voltage suppressor (TVS) device. It protects 5V circuits from transients like ESD and surge. The TVS uses cell clamping to protect lines during events. It is small and suitable for mobile and computer applications.
The document describes a bidirectional transient voltage suppressor (TVS) device. It protects 5V circuits from transients like ESD and surge. The TVS uses cell clamping to protect lines during events. It is small and suitable for mobile and computer applications.
General Description Features The UT3115B is a bidirectional Transient Voltage ESD Protection for the protected line to: Suppressor (TVS) designed to protect 5.0V circuits IEC 61000-4-2(ESD): ± 30 kV (Contact) from transient events such as high Electrostatic IEC 61000-4-2(ESD): ± 30 kV (Air) Discharge (ESD) and Cable Discharge Event (CDE). IEC 61000-4-4(EFT): 100A IEC 61000-4-5(Surge): 13A (8/20μs) This TVS uses a proprietary cell clamping Junction Capacitance (Pin1 to Pin 2): 14pF technology. During transient events, these cells clamp transient over-voltages on power or control Operating Voltage: 5.0 V data signals to protect sensitive circuitry. SOD523-2L (1.2mm X 0.8mm X 0.64mm )
The UT3115B is an ideal solution for high speed Pb-Free/Halogen Free/BFR Free and RoHS data line applications. Compliant
Pin Configuration Ordering Information
Part Number Part Marking Parameter
UT3115BCA2 XX XX=Date Code
XX Marking Diagram
Note: (1) Please check the sample/production availability with iPU representatives. SOD523-2L (2) iPU products are compatible with the current IPC/ Top View/Circuit Diagram JEDEC J-STD-020 requirement. They are halogen- free, RoHS compliant and 100% matte tin (Sn) plating that are suitable to use in SnPb or Pb-free soldering processes.
Applications Mobile Phone Power Line Protection Audio Protection Computer Interface Protection Latch up Protection Serial and Parallel Ports Protection Handheld Portable Applications
UT3115B-DS-F0000, Dec.2020 1 www.ipusemi.com UT3115B Absolute Maximum Rating Operating Junction Temperature Range, TJ ------------------------------------------------------------------------------------- -55℃ to +85℃ Storage Temperature Range, TSTG ------------------------------------------------------------------------------------------------ -55℃ to +150℃ Lead Soldering Temperature, TSOL (10sec) -------------------------------------------------------------------------------------------------- 260℃ Peak Pulse Current (8/20μs), IPP ------------------------------------------------------------------------------------------------------------------- 13A ESD Rating, VESD ESD Rating Per IEC 61000-4-2 (Contact) -------------------------------------------------------------------------------------------- ± 30 kV ESD Rating Per IEC 61000-4-2 (Air) --------------------------------------------------------------------------------------------------- ± 30 kV
Parameter Symbol Test Conditions Min Typ Max Units
Reverse Working Voltage VRWM Pin1 to Pin 2 -5.0 -- 5.0 V Breakdown Voltage VBR IBR = 1mA, Pin1 to Pin 2 5.5 7.5 9.5 V Reverse Leakage Current IR VRWM= 5.0V, Pin1 to Pin 2 -- -- 1 uA
IPP = 5A, Pin1 to Pin 2 -- 6.0 --
Surge Clamping Voltage IPP = 10A, Pin1 to Pin 2 -- 7.0 --
(8/20μs) IPP = -5A, Pin1 to Pin 2 -- -6.0 -- VC V ITLP = -10A, Pin1 to Pin 2 -- -7.0 --
TLP Clamping Voltage ITLP= 16A, Pin1 to Pin 2 -- 7.4 --
Positive Surge Clamping Voltage (8/20μs) Negative Surge Clamping Voltage (8/20μs)
Positive TLP Clamping Voltage Negative TLP Clamping Voltage
(tperiod=100ns,tr=1ns) (tperiod=100ns,tr=1ns)
Junction Capacitance (Pin 1 to Pin 2)
UT3115B-DS-F0000, Dec.2020 3 www.ipusemi.com UT3115B Package Information
SOD523-2L
Millimeters Symbol MIN. TYP. MAX. A 0.50 - 0.77 A1 0.00 - 0.07 b 0.25 - 0.35 c 0.08 - 0.20 E 0.70 - 0.90 D 1.10 - 1.30 D1 1.50 - 1.70 L1 0.20 REF
Note 1. Package Outline Unit Description: BSC: Basic. Represents theoretical exact dimension or dimension target. MIN: Minimum dimension specified MAX: Maximum dimension specified REF: Reference. Represents dimension for reference use only. This value is not a device specification. TYP : Typical. Provided as a general value. This value is not a device specification. 2. Dimensions in Millimeters 3. Drawing not to scale 4. These dimensions do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15mm.
