Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 61 views

    PPG MBPX Omni Plus Basecoat 8 10

    Uploaded by

    C
    Omni Automotive Finish Material Data

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PPG MBPX Omni Plus Basecoat 8 10

    Uploaded by

    C
    61 views2 pages
    Omni Automotive Finish Material Data

    Original Title

    ppg_mbpx_omni_plus_basecoat_8_10

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Omni Automotive Finish Material Data

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    61 views2 pages

    PPG MBPX Omni Plus Basecoat 8 10

    Uploaded by

    C
    Omni Automotive Finish Material Data

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MBPX 3.

    5 VOC Acrylic Urethane Basecoat


    Background Application
    MBPX is a fast drying, acrylic basecoat designed for Coats
    today’s automotive collision centers. For VOC
    compliance, MBPX must activated and then 2 coats or until hiding
    topcoated with a compliant Omni clear coat. Air pressure

    MBPX Acrylic Urethane Basecoat HVLP 7 - 10 psi at the air cap


    Color Conventional 45 - 55 psi at the gun
    MBPX 3.5 VOC Acrylic Urethane Basecoat Gun setup
    Reducer 1.3 - 1.5 mm or equivalent
    MR294 Fast, MR295 Medium, MR296 Slow,
    MR297 Retarder
    Hardener
    MH238
    Dry Times
    Compatible Substrates Between coats
    Cured, cleaned & sanded OEM and refinish enamels
    Any compliant Omni primer including: 5 - 10 minutes at 70ºF (21ºC)
    Air dry
    MP802 Multi-Purpose Primer
    MP243 Polyester Primer Tape: 45 minutes
    Clear: 20 minutes minimum, 24 hours
    maximum at 70ºF (21ºC) to clearcoat

    Preparation
    Surface cleaning
    SWX350 O So Clean
    SXA330 Wax and Grease Remover Clean Up
    Sanding Clean equipment with MR Reducer General purpose
    400 grit (machine or dry hand) or 500 grit (wet) on old Solvent. Follow EPA guidelines for proper storage
    finishes and primer surfacers and disposal of solvent-borne waste paint.

    Mixing
    Ratios
    MBPX MR Reducer MH238 Hardener
    10 : 10 : 1
    Note: MBPX may be reduced with half the
    reducer to improve hiding. At the 10:5:1 ratio, the
    flash times between coats may be extended. For
    metallic and pearl colors, the 10:10:1 ratio should
    be used for the final coat to improve metallic
    control and orientation.
    Pot Life
    8 hours at 70ºF (21ºC Properties
    Tinting VOC
    MBPX may be tinted up to 10% with OMNI AU Film build per coat
    mixing bases Applied (10:10:1) 0.5 - 0.6 mil
    Additives Square foot coverage at 1 mil
    None Applied (10:10:1) 245 - 277 sq. ft. / gal., no loss

    © 2010 PPG Industries Part # OB49 (8/10) MBP


    MBPX Color (Package) MBPX : MR29X : MBPX : MR29X :
    RTS Combinations: MH238 MH238
    Volume Ratio: N/A 10 : 10 : 1 10 : 5 : 1
    Applicable Use Category Color Coating Color Coating Color Coating
    VOC Actual (g/L) 84 - 347 42 - 175 63 - 231
    VOC Actual (lbs/gal) 0.70 – 2.90 0.35 - 1.46 0.47 – 1.93
    VOC Regulatory (less water less exempt) (g/L) 211 - 470 180 - 417 182 - 417
    VOC Regulatory (less water less exempt)
    1.76 – 3.92 1.50 - 3.48 1.52 - 3.48
    (lbs/gal)
    Density (g/L) 895 - 184 1094 - 1267 1070 – 1231
    Density (lbs/gal) 7.47 - 9.88 9.13 - 10.57 8.93 -10.27
    Volatiles wt. % 51.3 – 87.1 73.3 – 90.3 64.8– 87.2
    Water wt. % 0.0 0.0 0.0
    Exempt wt. % 33.3 – 78.7 61.7 – 86.3 53.3 – 82.0
    Water vol. % 0.0 0.0 0.0
    Exempt vol. % 43.0 – 76.7 56.2 – 84.1 58.9– 79.6

    Precautionary Information:
    The contents of this package may have to be blended with other components before the product can be used. Before opening the
    packages, be sure you understand the warning messages on the labels of all components, since the mixture will have the hazards
    of all its parts. Spray equipment must be handled with due care and in accordance with manufacturer’s recommendations. Follow
    label directions for respirator use. Wear eye and skin protection. Observe all applicable precautions.
    Medical Response:
    EMERGENCY MEDICAL OR SPILL CONTROL INFORMATION (412) 434-4515; IN CANADA (514) 645-1320.
    Material Safety Data Sheet:
    Material Data Safety Sheets for the PPG products mentioned in this publication are available through your PPG Omni Distributor.
    For additional information regarding this product, see the MSDS and label information.
    To the best of our knowledge, the technical information in this bulletin is accurate; however, since PPG Industries is constantly
    improving its coating and paint formulas, the current technical data may vary somewhat from what was available when this bulletin
    was printed. Contact your Omni Distributor for the most up-to-date information.

    © 2010 PPG Industries Part # OB49 (8/10) MBP

    You might also like