Atorch Manual
Atorch Manual
Atorch Manual
(This product will be updated at any time, please pay attention to the web page description for detailed update details)
Product parameters:
Test voltage:2~200V
Working current:3MA~23A±2A
DL24 Discharge power: voltage * current < 150 W
(The actual running current is limited by the maximum power, please adjust the current according to the law of
energy conservation)
The built-in over-current, over-temperature, over-power safety protection functions, if the protection interface is
popped up, please pay attention to the parameter adjustment, shall adjust to the maximum power, and then
discharge, you can first slowly and smoothly adjust the preset value in the start and discharge, in order to adjust
up to the maximum power for discharging
2.Product application:
1.1 Battery capacity test
The tester is designed for the discharge of various batteries,18650 battery,car battery including NiMH, NiCd, LiPo,
LiFe and Pb, as well as capacity testing.
1.2 Mobile power test
This tester supports discharging of mobile power supply and capacity test.
1.3 Power performance test
The tester supports performance and aging tests of various DC power supplies.
(2):
2.1 Power supply: DC 12V/1A
2.2 Voltage range: 0-200.00V, step 0.01V
2.3 Current range: 0.010-20.00A, step 0.01A (the current is automatically adjusted according to the power limit)
2.4 Discharge method:
CC: Constant current discharge of the battery, which supports testing of battery capacity or power supply current.
CP: Discharge the battery with constant power for use or test power such as constant power equipment.
2.5 Discharge power:150W
2.6 Four wires: voltage and current channels are separated, with high test accuracy
2.7 IPS display: voltage, current, time, capacity, power, electric energy, etc.
2.8 PC connection: The tester can be connected to the computer through Bluetooth to achieve more functions,
such as graphics, calibration, firmware upgrades, and test cycles.
3.Function interface introduction:
This product adopts the high-end and cost-intensive "2.4-inch high-definition large color Chinese
and English display screen", designed a variety of functional interface content,
Various parameters are displayed on one screen, and different function interfaces can be switched
by short pressing the button. The interface diagram and introduction are as follows
--Key Button operate Description--
1)Short press the“ON/OFF”button to start and stop, short press the upper left
corner of the "M" button to move the cursor and then adjust the corresponding
2) Long press the "+/- " button at the same time to clear all accumulated data
such as the current capacity, battery time, etc. (Long press the "ON/OFF" button
3) Long press the “M” button and the function mode starts to flash, then short
4) In OFF mode, long press the "ON/OFF" button to enter the background interface, then short press the "M" button to switch the
5) Short press the "+/-" button in the constant current accuracy column of the background setting interface to switch the constant
6) When the system is not supplying power, press and hold the "M" button and do not let go. Then power on again. Enter the splicing
power option and jump to the actual power value before let go
7) Long press the "M" button the function mode starts to flash, short press the "M" button again to enter the setting adjustment value
If you find that you have turned on Bluetooth and the display list is blank, please open your GPS location or
E-test's location information and storage information permissions, log out again, and then try to connect again!
3) Computer Bluetooth wireless online APP:
First add the Bluetooth device to the serial port device of DL24M-SPP on the computer, then scan the QR code
on the back of the host to download the corresponding APP software and store it. Open the software without
installing and select the Bluetooth serial port model just added. You can successfully use online
https://www.mediafire.com/file/sxpzzzwdwvons9w/DL24_series_electronic_load_software_V1.1_version.zip/file
14. Firmware upgrade
Ⅳ.Product List
1.Black DL24MP-150W Color Display Bluetooth Digital Control Curve Version Load Tester x1
2.DC12V 1A power supply x1
3.Temperature probe x1
4.Red and black single line crocodile clip line x1
5.US to EU adapter x1