GBL005E, GBL01E, GBL02E, GBL04E, GBL06E, GBL08E, GBL10E

www.vishay.com
Vishay General Semiconductor
Glass Passivated Single-Phase Bridge Rectifier
FEATURES
• UL recognition file number E54214
• Enhanced thermal capability
• High surge current capability
• Typical reverse leakage current less than 0.1 μA
~ ~ • High case dielectric strength
Case Type GBL • Solder dip 275 °C max. 10 s, per JESD 22-B106
• Material categorization: for definitions of compliance
LINKS TO ADDITIONAL RESOURCES please see www.vishay.com/doc?99912

3D 3D TYPICAL APPLICATIONS
3D Models
General purpose use in AC/DC bridge full wave rectification
for monitor, TV, printer, SMPS, adapter, audio equipment,
and home appliances application.
PRIMARY CHARACTERISTICS
IF(AV) 4A MECHANICAL DATA
50 V, 100 V, 200 V, 400 V, 600 V, Case: GBL
VRRM
800 V, 1000 V
Molding compound meets UL 94 V-0 flammability rating
IFSM 150 A
Base P/N-E3 - RoHS-compliant, commercial grade
IR 5 μA
Terminals: matte tin plated leads, solderable per
VF at IF = 4.0 A 1.0 V
J-STD-002 and JESD 22-B102
TJ max. 150 °C
E3 suffix meets JESD 201 class 1A whisker test
Package GBL
Circuit configuration In-line Polarity: as marked on body

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL GBL005E GBL01E GBL02E GBL04E GBL06E GBL08E GBL10E UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward 4.0 (1)
TA = 25 °C IF(AV) A
rectified output current at 2.6 (2)
Peak forward surge current single sine-wave
IFSM 150 A
superimposed on rated load
Rating for fusing (t < 8.3 ms) I2t 93 A2s
Operating junction and storage temperature range TJ, TSTG -55 to +150 °C
Note
(1) Unit mounted on 3.0" x 3.0" x 0.11" thick (7.5 cm x 7.5 cm x 0.3 cm) aluminum plate
(2) Free air, mounted on recommended copper pad area

ELECTRICAL CHARACTERISTICS (TJ = 25 °C unless otherwise noted)

TEST
PARAMETER SYMBOL GBL005E GBL01E GBL02E GBL04E GBL06E GBL08E GBL10E UNIT
CONDITIONS
Maximum instantaneous
4.0 A VF 1.0 V
forward voltage drop per diode
Maximum DC reverse current TJ = 25 °C 5.0
at rated DC blocking voltage IR μA
per diode TJ = 125 °C 500
Typical junction capacitance
4.0 V, 1 MHz CJ 50 pF
per diode

Revision: 26-Oct-2023 1 Document Number: 98472

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 GBL005E, GBL01E, GBL02E, GBL04E, GBL06E, GBL08E, GBL10E
www.vishay.com
Vishay General Semiconductor

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL GBL005E GBL01E GBL02E GBL04E GBL06E GBL08E GBL10E UNIT
RθJA 28 (1)(2)
Typical thermal resistance °C/W
RθJM 2.2 (3)
Notes
(1) The heat generated must be less than the thermal conductivity from junction-to-ambient: dP /R
D θJA
(2) Thermal resistance junction-to-ambient to follow JEDEC® 51-2A, device mounted on FR4 PCB, 2 oz., standard footprint
(3) Thermal resistance junction-to-mount to follow JEDEC® 51-14 transient dual interface test method (TDIM)

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
GBL06E-E3/P 2.31 P 20 Tube
GBL06E-E3/A 2.31 A 400 Paper tray

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Axis Title
Axis Title
5 10000
4.0 10000
Average Forward Rectified Current (A)

RthJM = 2.2 °C/W

4
Average Power Loss (W)

3.0 D = 0.3
1000 D = 1.0
1000
3
D = 0.2
2nd line
2nd line

1st line

2nd line
D = 0.8

1st line
2nd line

RthJA = 28 °C/W
2.0
2 D = 0.5
D = 0.1
100 100
T
1.0
1

D = tp/T tp
0 10 0 10
0 25 50 75 100 125 150 0 1 2 3 4 5
Mount Temperature (°C) Average Forward Current (A)

Fig. 1 - Derating Curves Output Rectified Current Fig. 3 - Forward Power Loss Characteristics
Per Diode

Axis Title Axis Title

150 10000 10000
TJ=TJ max.
Single Sine-Wave
Instantaneous Forward Current (A)

TJ = 150 °C
Peak Forward Surge Current (A)

10
100 1000 TJ = 125 °C 1000
2nd line
2nd line

1st line
1st line
2nd line

2nd line

TJ = 85 °C
1
50 100 100
TJ = 25 °C

TJ = -40 °C
0 10 0.1 10
1 10 100 0.4 0.6 0.8 1.0 1.2 1.4
Number of Cycles at 60 Hz Instantaneous Forward Voltage (V)

Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 4 - Typical Forward Voltage Characteristics
Per Diode Per Diode

Revision: 26-Oct-2023 2 Document Number: 98472

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 GBL005E, GBL01E, GBL02E, GBL04E, GBL06E, GBL08E, GBL10E
www.vishay.com
Vishay General Semiconductor

Axis Title Axis Title

10000 1000 10000
100 TJ = 150 °C TJ = 25 °C
Instantaneous Reverse Current (µA)

f = 1.0 MHz
Vsig = 50 mVp-p
10

Junction Capacitance (pF)

TJ = 125 °C
1000 100 1000
1

2nd line

2nd line
TJ = 85 °C
2nd line

1st line

1st line
2nd line
0.1

0.01 TJ = 25 °C 100 10 100

0.001
TJ = -40 °C

0.0001 10 1 10
10 20 30 40 50 60 70 80 90 100 0.1 1 10 100
Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V)

Fig. 5 - Typical Reverse Characteristics Fig. 6 - Typical Junction Capacitance

Per Diode Per Diode

Axis Title
100 10000
Transient Thermal Impedance (°C/W)

Junction to ambient

10 1000

2nd line
1st line
2nd line

1 100

0.1 10
0.001 0.01 0.1 1 10 100
tp - Pulse Duration (s)

Fig. 7 - Typical Transient Thermal Impedance

Per Diode

Revision: 26-Oct-2023 3 Document Number: 98472

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 GBL005E, GBL01E, GBL02E, GBL04E, GBL06E, GBL08E, GBL10E
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

0.827 (21.0)
0.811 (20.6)
0.118 (3.0) x 45°
chamfer

0.425 (10.8)
0.094 (2.4) 0.409 (10.4)
0.051 (1.3)

+ ~ ~
0.098 (2.5)
0.087 (2.2)
0.075 (1.9)
0.071 (1.8)
0.724 (18.4)
0.098 (2.5) 0.681 (17.3)
0.075 (1.9)

0.050 (1.27)
0.040 (1.02)

0.209 (5.3)
0.189 (4.8)

0.142 (3.6)
0.047 (1.2) 0.126 (3.2)
0.031 (0.8)
0.024 (0.6)
0.012 (0.3)

Revision: 26-Oct-2023 4 Document Number: 98472

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 01-Jan-2024 1 Document Number: 91000

For technical questions, contact:
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000