SB120, SB130, SB140, SB150, SB160

www.vishay.com
Vishay General Semiconductor
Schottky Barrier Plastic Rectifier
FEATURES
• Guardring for overvoltage protection
• Very small conduction losses
• Extremely fast switching
• Low forward voltage drop
• High forward surge capability
DO-204AL (DO-41) • High frequency operation
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS For use in low voltage high frequency inverters,
freewheeling, DC/DC converters, and polarity protection
IF(AV) 1.0 A
applications.
VRRM 20 V, 30 V, 40 V, 50 V, 60 V
IFSM 50 A MECHANICAL DATA
VF 0.48 V, 0.65 V
Case: DO-204AL (DO-41)
TJ max. 125 °C, 150 °C Molding compound meets UL 94 V-0 flammability rating
Package DO-204AL Base P/N-E3 - RoHS-compliant, commercial grade
Diode variations Single Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes the cathode end

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL SB120 SB130 SB140 SB150 SB160 UNIT
Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 V
Maximum RMS voltage VRMS 14 21 28 35 42 V
Maximum DC blocking voltage VDC 20 30 40 50 60 V
Maximum average forward rectified current IF(AV) 1.0 A
at 0.375" (9.5 mm) lead length (fig. 1)
Peak forward surge current 8.3 ms single half IFSM 50 A
sine-wave superimposed on rated load
Voltage rate of change (rated VR) dV/dt 10 000 V/μs
Operating junction temperature range TJ - 65 to + 125 - 65 to + 150 °C
Storage temperature range TSTG - 65 to + 150 °C

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL SB120 SB130 SB140 SB150 SB160 UNIT
Maximum instantaneous
1.0 A VF (1) 0.48 0.65 V
forward voltage
Maximum instantaneous reverse TA = 25 °C 0.50
IR (1) mA
current at rated DC blocking voltage TA = 100 °C 10 5.0
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle

Revision: 13-Aug-13 1 Document Number: 88715

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 SB120, SB130, SB140, SB150, SB160
www.vishay.com
Vishay General Semiconductor

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL SB120 SB130 SB140 SB150 SB160 UNIT
RJA (1) 50
Typical thermal resistance °C/W
RJL (1) 15
Note
(1) Thermal resistance junction to lead PCB mounted 0.375" (9.5 mm) lead length

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
SB140-E3/54 0.35 54 5500 13" diameter paper tape and reel
SB140-E3/73 0.35 73 3000 Ammo pack packaging

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 °C unless otherwise noted)

1.0 100
SB150 and SB160 TJ = 125 °C
Instantaneous Forward Current (A)
Average Forward Current (A)

0.75 10
TJ = 150 °C Pulse Width = 300 μs
1 % Duty Cycle
SB120 to SB140
0.5 1
TJ = 25 °C

0.25 0.1

Resistive or Inductive Load SB120 to SB140

0.375" (9.5 mm) Lead Length SB150 to SB160
0 0.01
0 25 50 75 100 125 150 175 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Lead Temperature (°C) Instantaneous Forward Voltage (V)

Fig. 1 - Forward Current Derating Curve Fig. 3 - Typical Instantaneous Forward Characteristics

50 100
TJ = TJ Max. SB120 to SB140
Instantaneous Reverse Current (mA)
Peak Forward Surge Current (A)

8.3 ms Single Half Sine-Wave SB150 to SB160

40 10

TJ = 125 °C
30 1

20 0.1 TJ = 75 °C

10 0.01
TJ = 25 °C

0 0.001
1 10 100 0 20 40 60 80 100
Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%)

Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 4 - Typical Reverse Characteristics

Revision: 13-Aug-13 2 Document Number: 88715

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 SB120, SB130, SB140, SB150, SB160
www.vishay.com
Vishay General Semiconductor

1000 100
TJ = 25 °C

Transient Thermal Impedance (°C/W)

f = 1.0 MHz
Vsig = 50 mVp-p
Junction Capacitance (pF)

10

100

SB120 to SB140
SB150 to SB160
10 0.1
0.1 1 10 100 0.01 0.1 1 10 100
Reverse Voltage (V) t - Pulse Duration (s)

Fig. 5 - Typical Junction Capacitance Fig. 6 - Typical Transient Thermal Impedance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-204AL (DO-41)

1.0 (25.4)
MIN.

0.107 (2.7)
0.080 (2.0)
DIA.

0.205 (5.2)
0.160 (4.1)

1.0 (25.4)
MIN.

0.034 (0.86)
0.028 (0.71)
DIA.

Revision: 13-Aug-13 3 Document Number: 88715

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
 Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.

Revision: 02-Oct-12 1 Document Number: 91000