RGP 10 G
RGP 10 G
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
For use in fast switching rectification of power supply,
IF(AV) 1.0 A
inverters, converters and freewheeling diodes for consumer
50 V, 100 V, 200 V, 400 V, 600 V,
VRRM
800 V, 1000 V
and telecommunication.
IFSM 30 A
trr 150 ns, 250 ns, 500 ns MECHANICAL DATA
IR 5.0 μA Case: DO-41 (DO-204AL), molded epoxy over glass body
VF 1.3 V Molding compound meets UL 94 V-0 flammability rating
TJ max. 175 °C Base P/N-E3 - RoHS-compliant, commercial grade
Package DO-41 (DO-204AL) Terminals: matte tin plated leads, solderable per
Circuit configuration Single J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: color band denotes cathode end
1.00 100
Average Forward Rectified Current (A)
0.50 1 TJ = 75 °C
0.25 0.1 TJ = 25 °C
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
0 0.01
25 50 75 100 125 150 175 0 20 40 60 80 100
Ambient Temperature (°C) Percent of Rated Peak Reverse Voltage (%)
30 100
TJ = 25 °C
TJ = TJ Max. f = 1.0 MHz
8.3 ms Single Half Sine-Wave Vsig = 50 mVp-p
Forward Surge Current (A)
20
10
10
0 1
1 10 100 1 10 100
Number of Cycles at 60 Hz Reverse Voltage (V)
Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance
10 100
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
1 10
TJ = 25 °C
Pulse Width = 300 μs
0.1 1 % Duty Cycle 1
0.01 0.1
0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 100
Instantaneous Forward Voltage (V) t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance
DO-41 (DO-204AL)
1.0 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
DIA.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
Note
• Lead diameter is 0.026 (0.66) for suffix “E” part numbers
0.023 (0.58)
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.