0027950 DATA SHEET

Valid from:
06.10.2021
ÖLFLEX® SERVO FD 796 CP

Application

ÖLFLEX SERVO FD 796 CP cables are high-flexible, screened, oil-resistant, halogen free, low capacitance servo motor
cables with an outer sheath of Polyurethane for the European, North American and Canadian market.
They are designed for use in high-dynamic applications with acceleration up to 50 m/s² in power chains as well as for fixed
installation subject to medium mechanical load conditions. They are also suitable for use in dry, damp or wet areas. They are
suitable for outdoor use if the indicated temperature range is observed.
ÖLFLEX SERVO FD 796 CP cables are increased resistant to oils and at room temperature largely resistant to acids and
alkalis. The outer sheath withstands high mechanical stresses, in particular abrasion and dragging. It is also cut proof and
resists microbes and hydrolysis.
They are especially suitable for increased requirements (Extended Line) in power chains and in permanently moved machine
parts. They are suitable for linear, automated movements. The maximum tensile load is 15 N/mm 2 of conductor cross-
section during installation and operation. Compulsory guidance is not permitted.
The screening braid protects against interference from electrical fields, the data pairs resp. triplet are additionally screened.

Application range:
Connecting cable between servo controller and motor, in power chains or moving machine parts, for use in assembling- &
pick-and –place machines, machine tools and transfer lines, for assembly lines, production lines in all kind of machines.

Use acc. to UL: PUR sheathed cable for external interconnection of electronic equipment.
Use acc. to cRUus: PUR sheathed cable for external interconnection of electronic equipment
with or without mechanical load conditions.
Use acc. to CSA: PUR sheathed cable for external interconnection without mechanical load conditions.

Design
Design acc. to UL AWM Style 20234, UL 758, CSA 22.2 No. 210-15
based on EN 50525-2-21
Certification UL AWM Style 20234, UL 758 (File No. E63634)
cRUus AWM I A/B II A/B (File No. E63634)
CSA AWM I/II A, C22.2 No. 210-15
 VDE-REG 8591 
EN 13501-6 and EN 50575
Classification of fire behaviour
(article/dimension range see www.lappkabel.com/cpr)
Conductor extra fine wire strands of bare copper acc. to IEC 60228 resp. EN 60228, Class 6
Core insulation Polypropylen- based compound
Core identification Power cores:
Black cores with white alphanumeric labelling
U/L1/C/L+; V/L2; W/L3/D/L-; GN/YE ground conductor

Control cores:
with 1 control pair: white, black
white, brown for following art.: 0027925, 0027926, 0027927,
0027981, 0027982, 0027983, 0027984

with 2 control pairs: black cores with white numbers 5-8 acc. to EN 50334
control pairs with different conductor cross-section:
1 mm²: black cores with white numbers 5-6
1.5 mm²: black cores with white numbers 7-8

Triplet: black cores with white numbers 1-3 acc. to EN 50334

Triplet + pair: triplet: black cores with white numbers 1-3 acc. to EN 50334
pair: black cores with white numbers 4-5 acc. to EN 50334

Star quad: black, white, red, yellow

Creator: HESC/PDC Document: DB0027950EN

Page 1 of 3
Released: ALTE/PDC Version: 09
We reserve all rights according to DIN ISO 16016.
PD 0019/05_04.18EN
 0027950 DATA SHEET
Valid from:
06.10.2021
ÖLFLEX® SERVO FD 796 CP

Pair /triplet / quad shield with 1 control pair: braid of tinned copper wires, coverage = 85% (nominal value)

aluminium-laminated foil, drain wire, braid of tinned copper

wires, coverage = 85% (nominal value) for art.
0027925 - 0027927 and 0027981 - 0027984

with 2 control pairs: aluminium-laminated foil, drain wire, braid of tinned

copper wires, coverage = 85% (nominal value)

with triplet and triplet + pair: aluminium-laminated foil, drain wire, braid of tinned
copper wires, coverage = 85% (nominal value)

with star quad: braid of tinned copper wires, coverage = 85% (nominal value)

Stranding 4 power cores (optionally with 1 resp. 2 control pairs, triplet, star quad) stranded
together with filler cords

Screen braid of tinned copper wires, coverage = 85% (nominal value)

Outer sheath Polyurethane-compound TMPU acc. to EN 50363-10-2
UL 758, CSA AWM C22.2 No.210-15
colour: Orange, similar RAL 2003

Electrical properties
Nominal voltage power cores EN: U0 / U: 600/1000V
control cores EN: U0 / U: 600/1000V

Rated voltage power cores UL/CSA: 1000V

control cores UL/CSA: 1000V

Test voltage core / core: 4000 V AC

core / screen: 4000 V AC
bundle screen / overal screen: 500 V AC

Transfer impedance at 30 MHz max. 250 mΩ/m

Mechanical and thermal properties

Min. bending radius flexing: up from 7.5 x outer diameter (up to16 mm²)
up from 10 x outer diameter (from 25 mm²)
fixed installation: 4 x outer diameter

Bending cycles and power chain See Selection Table A2-1 in the appendix of our online catalogue
operation parameters For use in power chains: Please comply with assembly guideline Appendix T3

Temperature range flexing (EN): -40 °C up to +90 °C (max. conductor temp.)

flexing (UL/CSA): up to +80 °C (max. conductor temp.)
fixed installation (EN): -50 °C up to +90 °C (max. conductor temp.)
fixed installation (UL/CSA): up to +80 °C (max. conductor temp.)

Flammability acc. to IEC 60332-1-2 resp. EN 60332-1-2

UL: Vertical flame test VW-1
CSA: FT1

Halogen-free acc. to EN 60754-1

Creator: HESC/PDC Document: DB0027950EN

Page 2 of 3
Released: ALTE/PDC Version: 09
We reserve all rights according to DIN ISO 16016.
PD 0019/05_04.18EN
 0027950 DATA SHEET
Valid from:
06.10.2021
ÖLFLEX® SERVO FD 796 CP

UV-resistance acc. to EN 50618

EN 50620
EN ISO 4892-2-2013, method A (change of colour allowed)

Ozone resistance acc. to EN 50396 method B

Oil resistance acc. to EN 50363-10-2
MUD resistance acc. to IEC 60092-360, Annex C+D
Tests acc. to IEC 60811, EN 50395, EN 50396, UL 1581and CSA C22.2

EU Directives These cables are conform to the EU-Directive 2014/35/EU (Low Voltage
Directive).
These cables (see www.lappkabel.com/cpr) are classified
in accordance with the EU-Regulation no. 305/2011 (CPR).

Environmental information These cables meet the substance-specific requirements of the EU Directive
2011/65/EU (RoHS).

Creator: HESC/PDC Document: DB0027950EN

Page 3 of 3
Released: ALTE/PDC Version: 09
We reserve all rights according to DIN ISO 16016.
PD 0019/05_04.18EN