R26L English 20240313
R26L English 20240313
R26L English 20240313
Horizontal: 2.5 mm + 0.5 ppm RMS Link rate: 9600 bps to 460800 bps
Post -processing
static Vertical: 5 mm + 0.5 ppm RMS Range: Typical 5 km to 8 km
Data formats
Positioning rate Default 1 HZ, Maximum 20 HZ RTCM2.x, RTCM3.x, CMR
R26L
Calibration - free IMU for pole - tilt
Tilt sensor compensation. Immuneto magnetic
disturbances.
4 LED indicates
Front panel
2 physical buttons
WWW.ALLYNAV.COM
COPYRIGHT AND COUNTERFEITING WILL BE INVESTIGATED ALLYNAV AGRI ALLYNAV INS NEW AGRICULTURE · NEW FUTURE
FEATURES
The R26L GNSS receiver features excellent
performance with full GNSS technology offers
best-in-class GNSS signal tracking and
TILT COMPENSATION FOR HARD-TO-REACH MEASUREMENTS
performs GNSS surveys beyond the usual
limitations. The R26L GNSS features the latest The built-in IMU module does not require calibration. It only needs to shake it
innovations, inertial module for automatic tilt slightly to complete the initialization, and the 5cm tilt measurement accuracy (≤
compensation in a very compact design. 30 °) can be achieved, so that you can easily measure in various geographical
scenarios.
Linux intelligent operating system, supporting
voice and WEBUI Support WIFI connection.
The Rover is equipped with a Type-C charge
and supports fast charging.
The Rover supports SIM card insertion to use ��° ��°
the network, and the base station is equipped
with a standard LEMO connector.
ALL-IN-ONE DESIGN
Built-in Bluetooth, radio, WIFI, storage, positioning, inertial navigation, antenna
and other modules to meet various needs of measurement work.