Do Sup Dy2900

SUPMEA AUTOMATION PTE. LTD.
No.600,No.21
Supmea Automation Co.,Ltd
Address:
Technological Development
Tel: 86-15158063876 E-mail: sales@supmea.com
Area,China www.supmea.com
Phone:
Fax:
Email:
Internet:
Dissolved oxygen meter

Committed to process automation solutions
Datasheet
SUP-DY2900
Add: 5th floor, Building 4,

Singapore-Hangzhou Science & Technology Park,
Hangzhou,China
No.600,No.21
Address:
Phone:
Fax:
Email:
Internet:
Supmea Dissolved oxygen meter

SUP-DY2900 Dissolved oxygen meter
Product description:
SUP-DY2900 Dissolved oxygen

online analyzer, an intelligent online
chemical analyzer. The cap of the sensor
is coated with a luminescent material.
Blue light from an LED illuminates the
SUP-DY2900
luminescent chemical. The luminescent Dissolved Oxygen meter
chemical instantly becomes excited and
releases red light. The time and intensity
Application:
of red light are inversely proportional
to the concentration of oxygen • Sewage treatment plants:
molecules, So the concentration of Oxygen measurement and regulation in the activated sludge
oxygen molecules is calculated. basin for a highly efficient biological cleaning process
• Environmental protection water monitoring:

Oxygen measurement in rivers, lakes or seas as an indicator
of the water quality
• Water treatment:
Oxygen measurement for status monitoring of drinking water
for example (oxygen enrichment, corrosion protection etc.)
• Fish farming:
Oxygen measurement and regulation for optimum living and
growth conditions

Hangzhou,China
No.600,No.21
Address:
Phone:
Fax:
Email:
Internet:
Features
· Support dissolved oxygen(DO), saturation(SAT), oxygen partial pressure(OPP) and

temperature measure.
·Support upper/lower limit control, transmitting output, RS485 communication.
·Configurable manual and auto temperature offset function.
·Configurable upper/lower limit alarm and delay.
·Configurable hummer and LCD backlight switch.
·Optional language, Chinese and English.
·Zero oxygen and full-scale calibration.

Hangzhou,China
No.600,No.21
Address:
Phone:
Fax:
Email:
Internet:
Measuring principle
• Sensor design:
– Oxygen-sensitive molecules (markers) are integrated in an optically active layer
(fluorescence layer).
– The surface of the fluorescence layer is in contact with the medium.
– The sensor optics are directed at the underside of the fluorescence layer.
• There is an equilibrium between the oxygen partial pressure in the medium and that in
the fluorescence layer:
– If the sensor is immersed in the medium, the equilibrium is established very quickly.
• Measuring process:
– The sensor optics send green light pulses to the fluorescence layer.
– The Oxygen-sensitive molecules instantly becomes excited and releases red light.
– The duration and intensity of the response signals is directly dependent on the oxygen
contents and the partial pressure.
– If the medium is free from oxygen, the response signals are long and very intense.
– Oxygen molecules quench the Oxygen-sensitive molecules. As a result, the response
signals are shorter and less intense.
• Measurement result:
– The sensor returns a signal that is in proportion to the oxygen concentration in the
medium.
– The medium temperature and air pressure are already taken into account calculated in
the sensor.
– In addition to the standard values of concentration, saturation index and partial pressure,
the sensor also returns a raw measured value in μs. The value corresponds to the decay
time of the fluorescence and is approx. 20 μs in air and approx. 60 μs in media free from
oxygen.

Hangzhou,China
No.600,No.21
Address:
Phone:
Fax:
Email:
Internet:
Technical Specifications:
Measurement variables Dissolved oxygen, saturation, oxygen partial pressure
Measuring range 0 - 20mg/L,0 - 200%,0 - 400hPa
Resolution 0.01mg/L,0.1%,1hPa
Accuracy ±1.5%FS
Repetition ±0.5%FS
Temperature
NTC 10K/PT1000
measurement type
Auto A/manual H -10 - 60℃ Resolution: 0.1℃ Correction
Measuring range accuracy: ±0.5℃
Output type 4 - 20mA current transmission output
Max.loop resistance 750Ω
Accuracy 0.1%FS
Output type RS485 digital signal output
Communication protocol Standard MODBUS-RTU (customizable)
Power supply AC220V±10%,50Hz/60Hz (optional 24V±10%)
Alarm relay AC250V、3A

Hangzhou,China
No.600,No.21
Address:
Phone:
Fax:
Email:
Internet:
Installation methods
1 dissolved oxygen transmitter
Open a 92.5 * 92.5(mm) installation hole on the instrument cabinet or installation panel
(the dimension is 100*100*150mm). Insert the instrument into the installation hole and
latch on the butterfly clasp, as shown below.
②dissolved oxygen sensor

Hangzhou,China
No.600,No.21
Address:
Phone:
Fax:
Email:
Internet:
Identification of terminal
Wiring diagram
+12VDC: Power supply of dissolved oxygen electrode

AGND: Power negative of dissolved oxygen electrode
RS485-A: Dissolved oxygen electrode communication-A
RS485-B: Dissolved oxygen electrode communication-B
NC: Null
RS485(A+): RS485 communication interface A+
Optical Dissolved Oxygen Online Analyzer – Operation Manual
RS485(B-): RS485 communication interface B-
I(+): 4-20mA output port +
I(-): 4-20mA output port -
HO: High alarm of normal open relay

HC: High alarm of normal close relay
COM: Common port
LO: Low alarm of normal open relay
LC: Low alarm of normal close relay
COM: Common port
220V L: AC220V fire wire
NC: Null
220V N: AC220V zero wire

Hangzhou,China
No.600,No.21
Address:
Phone:
Fax:
Email:
Internet:
China Singapore Germany Malaysia

China Headquarters Singapore Branch German Branch Malaysia Branch
Address: 5th floor, Building 4, Address: 2 VENTURE Address: Göttinger Straße.59 Address: No 3, Jalan Emas
Singapore-Hangzhou Science & DRIVE #11-30 VISION 30449 Hannover Niedersachsen Jaya 1, Taman Industries
Technology Park, Hangzhou, EXCHANGE SINGAPORE Deutschland Emas jaya Tongkang
China Pecah , Batu Pahat

Hangzhou,China

Do Sup Dy2900

Uploaded by

Copyright:

Available Formats

Do Sup Dy2900

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Do Sup Dy2900

Uploaded by

Copyright:

Available Formats

SUPMEA AUTOMATION PTE. LTD.

Dissolved oxygen meter

Add: 5th floor, Building 4,

Supmea Dissolved oxygen meter

SUP-DY2900 Dissolved oxygen

• Environmental protection water monitoring:

of the water quality

for example (oxygen enrichment, corrosion protection etc.)

Add: 5th floor, Building 4,

· Support dissolved oxygen(DO), saturation(SAT), oxygen partial pressure(OPP) and

Add: 5th floor, Building 4,

– Oxygen-sensitive molecules (markers) are integrated in an optically active layer

– The surface of the fluorescence layer is in contact with the medium.

the fluorescence layer:

contents and the partial pressure.

– Oxygen molecules quench the Oxygen-sensitive molecules. As a result, the response

signals are shorter and less intense.

Add: 5th floor, Building 4,

Measurement variables Dissolved oxygen, saturation, oxygen partial pressure

Measuring range 0 - 20mg/L,0 - 200%,0 - 400hPa

Output type 4 - 20mA current transmission output

Max.loop resistance 750Ω

Output type RS485 digital signal output

Communication protocol Standard MODBUS-RTU (customizable)

Power supply AC220V±10%,50Hz/60Hz (optional 24V±10%)

Alarm relay AC250V、3A

Add: 5th floor, Building 4,

1 dissolved oxygen transmitter

②dissolved oxygen sensor

Add: 5th floor, Building 4,

+12VDC: Power supply of dissolved oxygen electrode

HO: High alarm of normal open relay

Add: 5th floor, Building 4,

China Singapore Germany Malaysia

Add: 5th floor, Building 4,

You might also like