Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    934-Data Sheet

    Uploaded by

    ushzilla

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    934-Data Sheet

    Uploaded by

    ushzilla
    3 views6 pages

    Original Title

    934-Data sheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views6 pages

    934-Data Sheet

    Uploaded by

    ushzilla

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    DIFFERENTIAL PRESSURE DPF266 & PF266 & VF266 ATEX/

    LOW PRESSURE AND VACUUM IECEx Exd, Exia & INDUSTRIAL


    316 stainless steel or black DIFFERENTIAL PRESSURE, LOW
    anodised aluminium switchcase to
    IP66 standards. PRESSURE AND VACUUM SWITCH
    Internal adjustment scale.
    Settings from 0.25 mBar to 8.5 Bar.
    Single or dual microswitch option.
    Wetted parts NACE MR-01-75 compliant.
    ATEX/IECEx Flameproof version
    CE II2G Exd IIB + H2 T6...T2 Gb
    Tam -60 to +75˚C...90˚C
    (Dust certification available upon request,
    please refer to page 47)
    ATEX/IECEx Intrinsically safe version
    CE II1G Exia IIC T6...T2 Ga
    Tam -50 to +78˚C...128˚C
    (Dust certification available upon request,
    please refer to page 47)

    (For resistor certification refer to page 47)

    This range has been used to monitor filter blockage and air movement through ducting
    worldwide and has been specified extensively for offshore applications. Incorporating
    a diaphragm and two sealing Belloframs the switch offers reliable switching action
    when a differential pressure is required to be sensed. They can, by venting either the
    HP or LP connection, be used as a low pressure or vacuum switch. Resistors can
    be incorporated for ‘end of line’ and short circuit monitoring. For specification and
    introduction to the Titan switch range refer to pages 46 & 47.

    ADJUSTMENT MAXIMUM WORKING MAXIMUM WORKING DEADBAND SPRING DIAPHRAGM


    RANGE PRESSURE PRESSURE FIXED CODE CODE
    (BAR D) EQUALISED (BAR D) ONE SIDED (BAR G) (mBAR G)
    1.75 - 8.5 28 14 100 - 400 W 01
    0.5 - 5.5 28 14 40 - 380 P 01
    0.3 - 1.1 28 14 40 - 90 R 01
    125 - 725mbar 10 7 10 - 75 G 02
    50 - 250mBar 10 7 5.0 - 27.5 G 03
    25 - 75mBar 10 7 4.2 - 7.5 T 03
    15 - 55mBar * 0.5 0.35 0.75 - 3.0 B 08
    4 - 16mBar * 0.5 0.35 0.75 - 2.0 R 08
    1 - 5mBar * 0.5 0.35 0.4 - 0.75 T 08
    0.4 - 4.4mBar Viton Diaphragm / 0.5 0.35 0.05 - 0.25 T 48
    0.25 - 4.25mBar Nitrile Diaphragm / 0.5 0.35 0.05 - 0.25 T 28
    * Max. equalised pressure on these ranges can be specified up to 3.5 Bar with diaphragm material options C & D.

    56
    PART NUMBER BREAKDOWN - DPF266
    B = ATEX/IECEx Exd CERTIFIED DIAPHRAGM MATERIAL A = BRACKET FOR 01 DIAPHRAGM CODE
    O = ATEX/IECEx Exia CERTIFIED A = NITRILE E = 2” PIPE BRCKT FOR 01 DIA CODE
    A = INDUSTRIAL B = VITON G = BRACKET FOR 02 & 03 DIA CODE
    C = NITRILE* P = 2” PIPE BRCKT FOR 02 & 03 DIA CODE
    A = ALUMINIUM CASE
    D = VITON* W = BRACKET FOR 08 DIA CODE
    S = ST. STEEL CASE *(C & D FOR CODE 08 WITH 3.5 BAR EQUALISED)
    T = 2” PIPE BRCKT FOR 08 DIA CODE
    DPF266 DIFF. PRESS. M = DP286 REPLACEMENT FOR 01 DIA CODE
    SPRING CODE L = 2” POST MOUNTING (SPARES ONLY)
    PF266 PRESSURE
    (SEE RANGE SHEET)
    VF266 VACUUM
    ELECTRICAL
    ENTRY

    DPF266S1B/BRF01SB2/AA A = M20 STRAIGHT


    B = M20 ANGLED
    C = 1/2” NPT STR.
    F = M25 STRAIGHT
    1 = 1 x SPDT SWITCH DIAPHRAGM CODE PROCESS CONNECTIONS
    2 = 2 x SPDT SWITCH F01SB = 01 DIAPHRAGM CODE DIAPHRAGM CODES 01, 02 & 03 (FEMALE)
    F02SB = 02 DIAPHRAGM CODE 1 = 1/4” BSP.P - DP 2 = 1/4” NPT - DP
    DUAL SWITCHES ARE F03SB = 03 DIAPHRAGM CODE 3 = 1/4” BSP.P - P 4 = 1/4” NPT - P
    MECHANICALLY LINKED TO F08SB = 08 DIAPHRAGM CODE 5 = 1/4” BSP.P - V 6 = 1/4” NPT - V
    PROVIDE DPDT SWITCHING A = 1/2” BSP.P - DP B = 1/2” BSP.P - P/V
    ACTION SEE RANGE SHEET C = 1/2” NPT - DP D = 1/2” NPT - P/V
    PROCESS CONNECTIONS
    DIAPHRAGM CODE 08, 28 AND 48

    1 = 1/4” O/D TUBE POSI. ELBOW DP H = 12mm O/D TUBE PR/VAC


    2 = 1/4” O/D TUBE TEE DP J = 1/4” BSP.P FEMALE STRAIGHT DP
    4 = 1/4” O/D TUBE POSI. ELBOW PR K = 1/4” BSP.P FEMALE STRAIGHT PR/VAC
    5 = 1/4” O/D TUBE POSI. ELBOW VAC L = 1/4” BSP.T FEMALE STRAIGHT DP
    9 = SPECIAL M = 1/4” BSP.T FEMALE STRAIGHT PR/VAC
    A = 6mm O/D TUBE DP N = 1/4” BSP.P MALE STRAIGHT DP
    B = 6mm O/D TUBE PR/VAC P = 1/4” BSP.P MALE STRAIGHT PR/VAC
    C = 8mm O/D TUBE DP Q = 1/4” NPT FEMALE STRAIGHT DP
    D = 8mm O/D TUBE PR/VAC R = 1/4” NPT FEMALE STRAIGHT PR/VAC
    E = 10mm O/D TUBE DP S = 1/4” NPT MALE STRAIGHT DP
    F = 10mm O/D TUBE PR/VAC T = 1/4” NPT MALE STRAIGHT PR/VAC
    G = 12mm O/D TUBE DP U = 1/2” NPT FEMALE STRAIGHT DP
    V = 1/2” NPT FEMALE STRAIGHT PR/VAC

    SPECIFICATION

    Temperature limitations : Wetted parts : Diaphragm codes 01, 02 & 03 -


    Diaphragm code: 01 as page 45 316 St. steel. Code 08, 28 & 48 - 316 St. steel
    Diaphragm code: 02, 03 & 08 Process connections : Diaphragm codes 01,
    Viton : -10 to + 150˚C 02 & 03 - 1/4” or 1/2” BSP.P or NPT female.
    Nitrile: -25 to +95˚C Diaphragm code 08SB, 28SB & 48SB
    Alternatives are available. compression or threaded as table above.

    Detailed drawings :
    DPF266, diaphragm codes 01, 02 & 03 - page 58
    DPF266, diaphragm code 08, 28 & 48 - page 59

    57
    58
    59
    TITAN (XPB) ATEX Exd, Exia INDUSTRIAL SWITCHES

    INTRODUCTION

    The Titan pressure, differential pressure, temperature, level and flow switches
    are designed for use in environments where explosive gases and dust can be
    present (e.g. Gas fields, Oil rigs and Chemical plants etc.) and have been ATEX and
    IECEx certified as detailed on page 47. (SIL 2 - IEC61508 proven reliability.

    These switches are manufactured from a high quality casting which offers robust
    construction and protection to IP66 for use within heavily polluted industrial and
    marine environments. A special feature of the instruments is the separation of the
    flameproof and adjustment compartments allowing for safe on-site adjustment of the
    set point with power on and the switch in operation.

    The TITAN Exd certified switches must be installed in accordance with BS EN


    60079-14. The certification allows for mounting against a wall or bulkhead with the
    mininum flamepath distances specified not being applicable.

    CALIBRATION

    The design features a simple form of


    calibration adjustment against a scale
    plate. This allows users to either order
    units with a specific setting, or stock a
    mid range setting and then adjust to
    suit the application. This can be set
    safely with the switch supply live. On
    removal of the adjustment cover the
    adjusting ring can be turned with a small
    Tommy bar or Allen key. The setting is
    read from the centre of the red pointer
    ring against the calibrated scale plate.
    Rotation to the left will increase the
    set point and to the right decrease the
    set point. The adjustment mechanism
    incorporates a friction device to ensure
    set point will not change under vibration When we are requested to supply switches set at a specific
    conditions. point we can guarantee setting accuracy of better than 2%.

    Pyropress Engineering
    Bell Close, Newnham Industrial Estate,
    Plympton, Plymouth. Devon PL7 4JH UK
    Tel: +44 (0)1752 333933
    Fax: +44 (0)1752 336681
    E-mail: sales@pyropress.com
    Website: www.pyropress.com
    Revision: F 03/15

    46
    TECHNICAL SPECIFICATION

    Switchcase and covers : 316 stainless steel or black anodised aluminium.

    Microswitch : 1 x SPCO/SPDT or 2 x SPCO/SPDT gold flashed silver contacts.


    Dual switches are mechanically linked to provide DPDT switching action, reset of
    switches could be up to 3% apart. Dual microswitches may increase deadband by
    a factor of two.

    Microswitch rating : 5 Amps @ 250 VAC resistive, 2 Amps @ 250 VAC inductive.
    5 Amps @ 30 VDC resistive, 3 Amps @ 30 VDC inductive.

    Electrical connections : Terminals suitable for cable 0.5 - 2.5 mm2.


    (Max 1.5mm2 for dual microswitch version)

    Electrical Conduit Entry : M20 x 1.5 straight or angled entry. ½” NPT via adaptors

    Environmental Protection : IP66 in accordance with BS EN 60529

    Vibration and shock parameters : Switches were subjected to Ministry of


    Defence Type Approval System Test Vibration DGS 350 Paras 0602 & 0603.
    Shock – BR3021

    Temperature Limitations : Pressure, Vacuum and Differential Pressure.


    Process : Diaphragm actuated (unless otherwise stated) -30 to +110°C (Nitrile)
    or -20 to +150ºC (Viton). Piston actuated -30 to +125°C (Nitrile) or -20 to +150°C
    (Viton), -50 to 150°C (PTFE) or -30 to +125°C (EPDM).
    Ambient : -50 to +85ºC (standard). Storage : -60 to +85º Deg C.
    (For temperature, level and flow switches please refer to specific pages).

    Accuracy : +/-1% at 20°C

    47

    You might also like