SDLP Use of Hardware Tools

Republic of the Philippines
Department of Education
Region V
Homobono H, Gonzalez National High School
Date: May 24, 2023
Semi- Detailed Lesson Plan in Grade 8- TLE (Computer Hardware Servicing)

Time: 2:00 pm-3:00pm
I. LEARNING OBJECTIVES
At the end of 60 minutes class discussion, atleast 85% of the Grade 8- Garnet are
expected to:
1. identify the different tools used in hardware servicing and their uses;
2. explain the importance of tools used in hardware servicing; and
3. classify and label the different hardware servicing tools.
II. SUBJECT MATTER

a. Topic: Use of Tools in PC Hardware Servicing (Hardware Servicing Tools)
b. References: K-12 Basic Education Program- TLE Learning Module in ICT-
Computer Hardware Servicing, p. 26-29
c. Instructional Materials: Manila Paper, Video, Pictures, Tarpapel
d. Methodology: 4A’s (Activity, Analysis, Abstraction, Application)
e. Values Integration: Cooperation, Value the importance of tools used in hardware
servicing
f. Time Frame: 60 minutes
III. PROCEDURE
Teacher’s Activity
Preliminary Activities
a. Greetings
Good afternoon, class.
How are you today?
b. Prayer
Let us all stand for the opening prayer.
Jellian, please lead the prayer.
c. Checking of Cleanliness
Okay class, before you take your seat pick up the pieces of dirt under your chair and
arrange your chair properly.
d. Checking of Attendance
Let us now check your attendance. If you’re here say PRESENT and if your
classmate is not here, say ABSENT.
Checking of Assignment
Let us now check your assignments. Put out your notebooks and pass it in front.
Recall
What was our topic last meeting?
Can you give an example of ports and cables?
What are the steps in connecting cables?
How did you plug the cable to its ports?

Motivation
Before we proceed discussing our topic, we will play a game. Let’s go TREASURE
HUNTING!
Here are the instructions:
1. We have three levels here. Each level has a corresponding question.
2. Each question has a corresponding price.
3. You must answer the question of each level correctly so the pirate will move
until it gets the treasure chest.
4. The treasure chest will reveal our topic for today.
LEVEL 1: Which tool is used to strip and cut wires?

ANSWER: WIRE CUTTER
LEVEL 2: Which tool is used to loosen or tighten cross-head screws?

ANSWER: PHILIPS SCREW DRIVER
LEVEL 3: I’m at your hand when you need light, you need me the most when its
dark at night. What am I?
ANSWER: FLASHLIGHT
LEVEL 4: We are a tool you use to clean, blow the dust and wipe the scene. What
do we call?
ANSWER: CLEANING TOOLS
Did you already have an idea about our topic today?
Lesson Proper
So, our topic for today is about the Hardware Servicing Tools.
Here are the learning outcomes that you will be able to meet at the end of the lesson;
(Present the Leaning Outcomes)
Here are some terminologies that you will encounter to our discussion:
Definition of Terms
Static electricity – An accumulation of electric charge on an insulated body.
Tool – Is a handheld device that aids in accomplishing a task.
Toolkit – A set of tools designed to be used together.
A. Activity
Now, let’s start with an activity.
1. First, form into three groups.
2. Each group will be given several tasks.
GROUP 1: - Classify and label the pictures of tools used in computer hardware
servicing.
GROUP 2: You will be given a picture of tools used in computer hardware servicing.
 Make a collage using those pictures of computer hardware servicing tools.
GROUP 3: -Watch a short video. after watching the video, you will list down the tools
used and state its use.
3. You only have two (2) minutes to finish your task.

4. Each group will present their work after 2 minutes.
5. The first group to finish their task and present their work will have a surprise.
B. Analysis
Discussion/ Brainstorming
 Discuss the four categories of hardware tools.
 Discuss the Electro-Static Discharge (ESD) tools, hand tools, cleaning tools and
diagnostic tools.
C. Abstraction
Did you see an actual hardware servicing tools?
Who use those kinds of tools? Did you experience using those tools?
How important are those tools?
Is it necessary for a future computer hardware servicer to be familiar with those tools
and its uses? Why?
What do you think will happen if a hardware servicer is not familiar with those tools
and its uses?
D. Application
Let’s have an activity to apply the knowledge you gain from our discussion.

 Form into three groups. Each group will be given a picture of the tools.
 Each group will classify and label the tools given to them.
 After classifying and labeling, each group will post it on the manila paper posted on
the board.
 You only have 2 minutes to classify and label the tools.
 Each group will present their work and state the uses and importance of the
classified and labeled tools.
Electro-Static Hand
Cleaning Diagnostic
Discharge (ESD) Tool
Tools Tools
tools s
This is the rubrics on how will I grade you in this activity.
RUBRICS
Classify and label the Tools accurately 30
Explain briefly their uses and importance 30
Presentation 20
E. Generalization Cooperation 20
Who can sum up our
discussion today?
Do you have further questions or clarification to our topic?
Since you don’t have any questions, we will be having our quiz. Get one-half sheet of
paper.
IV. EVALUATION
Directions: Match COLUMN A to COLUMN B.
COLUMN A COLUMN B
1. Philips Screwdriver A.
2. Needle-nose Screwdriver B.
3. Flat-head Screwdriver F.
4.Lint-Free Cloth D.
5. Multi-meter E.
Direction: Identify the tools according to the uses provided.
Needle-Nose Pliers Wire Cutter Multi-meter

Parts Organizer Anti-Static Mat Loopback Adapter
____________6. Is used to stand on or place hardware on to prevent static electricity from

building up.
____________7. Is used to test the functionality of computer ports.
____________8. It is used to test the integrity of circuits and the quality of electricity in
computer components.
____________9. Is used to hold small parts.____________10. Is used to hold screw,

jumpers, fasteners and other small parts and prevents them from getting mixed together.
ANSWER:
1. D 6. Anti-Static Mat
2. E 7. Loopback Adapter
3. C 8. Multi-meter
4. A 9. Needle-nose pliers
5. B 10. Parts Organizer
V. ASSIGNMENT
Directions: Make a collage using the pictures of tools used in computer hardware
servicing. You may use any shape of tools for your layout.
Prepared by:
Reigne G. De Guzman Checked by:

Practicum Teacher
Francia C. Parma
Cooperating Teacher

SDLP Use of Hardware Tools

Uploaded by

Copyright:

Available Formats

SDLP Use of Hardware Tools

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SDLP Use of Hardware Tools

Uploaded by

Copyright:

Available Formats

Republic of the Philippines

Semi- Detailed Lesson Plan in Grade 8- TLE (Computer Hardware Servicing)

II. SUBJECT MATTER

How are you today?

Jellian, please lead the prayer.

Can you give an example of ports and cables?

What are the steps in connecting cables?

How did you plug the cable to its ports?

LEVEL 1: Which tool is used to strip and cut wires?

LEVEL 2: Which tool is used to loosen or tighten cross-head screws?

Did you already have an idea about our topic today?

3. You only have two (2) minutes to finish your task.

How important are those tools?

Here are the instructions:

This is the rubrics on how will I grade you in this activity.

Do you have further questions or clarification to our topic?

Direction: Identify the tools according to the uses provided.

Needle-Nose Pliers Wire Cutter Multi-meter

____________6. Is used to stand on or place hardware on to prevent static electricity from

____________7. Is used to test the functionality of computer ports.

____________9. Is used to hold small parts.____________10. Is used to hold screw,

Reigne G. De Guzman Checked by:

You might also like

9. Is used to hold small parts.10. Is used to hold screw,