Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

LS200 HD

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

sect.

15 0600009
rev. 2024/01/02

Liquid Level Switches


LS200 Series
Designed for harsh gas compressor scrubber
applications, the LS200 Series Liquid Level Switches
feature a robust design that trips on rising liquid level
only. With both electric and pneumatic models available,
the instruments screw directly into the vessel or can
be mounted via an external float chamber. The nickel- Electric Model
plated body provides enhanced corrosion protection
while the 304 stainless steel float operates in 0.55
specific gravity and heavier fluids. Additional features
include:
• Rated for 2000 psi (13.8 MPa) [138 bar] working
pressure
• Listed for cCSAus Class I, Div 1, Grps C & D Pneumatic Model
locations
• Canadian registered
• Stainless steel models available for corrosive
atmospheres
The LS200 Series replaces the FW Murphy Series
L1200 Liquid Level Switches. The MSLS (Scrubber
Level System) replaces the LS200 high-level shut-down
switch with the MLS-020 magnetic level switch.

Models

LS200 Liquid Level Switches with 2 in. NPT mounting


are float activated to operate an electrical SPDT snap- Dimensions
switch (optional DPDT on some models) for alarm or
shutdown of an engine or electric motor. The LS200 LS200, L1100
connects directly into the vessel wall and can be used
with an FW Murphy weld collar or FW Murphy external
float chamber.
LS200NDVOR is a float-activated, pneumatic-vent
level device used to operate DVU Series dump valves
or similar devices. It provides a 2 in. NPT mounting
with a pneumatic output for interfacing with pneumatic
devices such as the FW Murphy pneumatic dump valve
or other pneumatic instrumentation.
LS200NDVO is the Dump Valve Operator (DVO)
without the pressure regulator for those applications
where the system provides a filter regulator for
instrument-quality air or gas as the control medium. LS200 L1100*
LS200N is the pneumatic level switch without the A 10.16 in (258 mm) 11 in. (279 mm)
DVO or filter regulator. Please note: pneumatic media B 3.44 in. (87 mm) 3.50 in. (189 mm)
devices require clean, dry, instrument-quality air or gas.
C 1.75 in. (44 mm) 1.56 in. (40 mm)
D 2.80 in. (71 mm) 3.4 in. (71 mm)
E 2 NPT 1-1/2 NPT
* The L1100 has been discontinued and remains in the table for
reference purposes only.

In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our specifications and designs at any time.
FW MURPHY product names and the FW MURPHY logo are proprietary trademarks. This document, including textual matter and illustrations, is copyright
protected with all rights reserved. (c) 2024 FW MURPHY. A copy of our typical warranty may be viewed or printed by going to www.fwmurphy.com/warranty.
Application Data

Pipe Data
Nom. Size O.D. Schedule Wall Thickness Inside Diameter
(inches) (inches) Number (inches) (inches)
3 3.5 40ST 0.216 3.068
3 3.5 80XS 0.3 2.9
4 4.5 40ST 0.237 4.026
4 4.5 80XS 0.337 3.826

Minimum Clearance with Full Thread Engagement


Insertion Depth (inches) Vertical Clearance (inches)
Product Std. w/ 1” Extension Std. w/ 1” Extension
LS200 4.6 5.6 2.8 3.15
LS200N 5.43 6.4 3.3 3.9
L1200 4.65 5.7 3.9 4.55
L1200N 5.6 6.7 5.3 6.9
L1100 4.4 5.4 3.4 4.05
Models L1200, L1200N and L1100 are discontinued and remain in the table for reference purposes only.

LS200N, LS200NDVO and LS200NDVOR with Dump Valve Operator, Pressure Regulator and Gauge

CAUTION:
LS200 Series parts are not
interchangeable with
the L1200 Series.

Accessories

Refer to LS200 installation and operation manual LS200 Minimum Allowable Specific Gravity
for additional information.
External Float Chamber Model Float Extension Pressure Specific
Operating Pressure: 2000 psi (13.8 MPa) [138 bar] Length (inches) (psi) Gravity
Operating Temperature: 400° F (204° C) 0 0.55
LS200 2000
Weld Collar 1 0.7
Operating Pressure: 2000 psi (13.8 MPa) [138 bar] 0 0.63
Operating Temperature: 400° F (204° C) LS200NDVO 2000
Float Shaft Extension 1 0.73
LS200 Series: 1 in.
Specifications
All Models LS200NDVO
Listed for cCSAus Class 1, Div 1, Grps C & D Locations Process Connection: 2” NPT
Canadian Registration Numbers (issued by ABSA): DVO Valve: 3-way N.C. w/manual operator, all connections 1/8”
LS200: 0F01476.2 NPT
L1200, L1200N and L1100 Series: 0F01476.0 LS200N
Body: Nickel-plated; optional 316 stainless steel Process Connection: 2” NPT
Float: 304 stainless steel Vent Valve: 2-way N.C. w/ 1/16 in. (2 mm) orifice and Viton seat;
Pressure Rating: 2000psig (13.8 MPa) [138 bar] Inlet: 1/8” NPT; Outlet: 3/8” NPT
LS200
O-ring: Viton Electrical
Process Connection: 2” NPT
Temperature Rating: -20° to 300°F (-29° to 149°C)
Electrical: SPDT std.
Wiring: 18 AWG x 36 in. (1.0 mm2 x 916 mm)
LS200NDVOR
Process Connection: 2” NPT
DVO Valve: 3-way N.C. w/manual operator, all connections 1/8”
NPT (minimum 30 psig required)
Filter/Pressure Regulator Set:
Regulator: 0 to 75 psig (0 to 517 kPa) [0 to 5.17 bar] range
Maximum Input Pressure: 300 psig (2.07 MPa) [20.7 bar]

How to Order

Options listed below. All configurations may not be available. Call your sales representative or FW Murphy for more
information.

LS200 – D Approximate Shipping Weight and Dimensions


Model Weight Dimension
Base Model LS200 6 lb. 12 oz. 13-1/2 x 4-1/2 x 3-1/2 in.
LS200 Options LS200SS 6 lb. 13 oz. 13-1/2 x 4-1/2 x 3-1/2 in.
LS200N D = DPDT LS200N 5 lb. 1 oz. 13-1/2 x 4-1/2 x 3-1/2 in.
LS200NDVO LS200NDVO 5 lb. 15 oz. 13-1/2 x 4-1/2 x 3-1/2 in.
LS200NDVOR LS200NDVOR 6 lb. 8 oz. 13-1/2 x 4-1/2 x 3-1/2 in.
LS200SS
LS200NSS
LS200NSSDVO
LS200NSSDVOR

Part Number Description Notes


15700799 External Float Chamber
15050375 Weld Collar Shipping Weight: 6 lb. (2.7 kg)
15000478 1 in. Float Shaft Extension LS200 Series
15010267 Dump Valve Operator Assembly DVO

Note: Refer to the Installation and Operation manual 00-02-0671 for replacement parts at fwmurphy.com.

You might also like