DIESEL GENERATOR SET

STANDBY
880 ekW 1100 kVA
50 Hz 1500 rpm 400 Volts
Caterpillar is leading the power generation
marketplace with Power Solutions engineered
to deliver unmatched flexibility, expandability,
reliability, and cost-effectiveness.
Image shown may not
reflect actual package.

FEATURES
FUEL/EMISSIONS STRATEGY CAT® C32 ATAAC DIESEL ENGINE
• Low Emissions • Utilizes ACERT™ Technology
• Reliable, rugged, durable design
DESIGN CRITERIA • Four-cycle diesel engine combines consistent
• The generator set accepts 100% rated load in one performance and excellent fuel economy with
step per NFPA 110 and meets ISO 8528-5 transient minimum weight
response. • Electronic engine control
FULL RANGE OF ATTACHMENTS CAT GENERATOR
• Wide range of bolt-on system expansion • Designed to match the performance and output
attachments, factory designed and tested characteristics of Cat diesel engines
• Flexible packaging options for easy and cost • Single point access to accessory connections
effective installation • UL 1446 recognized Class H insulation
SINGLE-SOURCE SUPPLIER CAT EMCP 4 CONTROL PANELS
• Fully prototype tested with certified torsional • Simple user friendly interface and navigation
vibration analysis available • Scalable system to meet a wide range of
customer needs
WORLDWIDE PRODUCT SUPPORT
• Integrated Control System and Communications
• Cat dealers provide extensive post sale support
Gateway
including maintenance and repair agreements
• Cat dealers have over 1,800 dealer branch stores
operating in 200 countries
• The Cat® S•O•SSM program cost effectively detects
internal engine component condition, even the
presence of unwanted fluids and combustion
by-products
STANDBY 880 ekW 1100 kVA
50 Hz 1500 rpm 400 Volts

FACTORY INSTALLED STANDARD & OPTIONAL EQUIPMENT

System Standard Optional

Air Inlet • Single element canister type air cleaner [ ] Dual element air cleaners
• Service indicator [ ] Air inlet adapters
Cooling • Radiator with guard [ ] Jacket water heater
• Coolant drain line with valve
• Fan and belt guards
• Cat Extended Life Coolant
• Coolant level sensors
• Radiator duct flange
Exhaust • Dry exhaust manifold [ ] Stainless steel exhaust flex fittings
• Flanged faced outlets [ ] Elbows, flanges, expanders & Y adapters
Fuel • Primary fuel filter with water separator
• Secondary fuel filter
• Fuel priming pump
• Flexible fuel lines
• Fuel cooler
Cat Generator • Class H insulation [ ] Oversize & premium generators
• Cat Digital Voltage Regulator (CDVR) with kVAR/PF [ ] Winding temperature detectors
control, 3-phase sensing [ ] Anti-condensation heaters
• Reactive droop [ ] Bearing temperature detectors

Power Termination • Bus bar (NEMA or IEC mechanical lug holes) [ ] Circuit breakers, UL listed, 3 pole with shunt trip,
• Top cable entry 100% rated, manual or electrically operated
[ ] Circuit breakers, IEC compliant, 3 or 4 pole with
shunt trip, manual or electrically operated
[ ] Bottom cable entry
[ ] Power terminations can be located on the right, left
and/or rear as an option. Multiple circuit breaker
options

Governor • ADEM™ A4 [ ] Load Share Module

Control Panels • EMCP 4.2 [ ] EMCP 4.3 ... [ ] EMCP 4.4

• User Interface panel (UIP) - rear mount [ ] Option for right or left mount UIP
• AC & DC customer wiring area (right side) [ ] Local & remote annunciator modules
• Emergency stop pushbutton [ ] Digital I/O Module
[ ] Generator temperature monitoring & protection
[ ] Remote monitoring software

Lube • Lubricating oil and filter

• Oil drain line with valves
• Fumes disposal
• Gear type lube oil pump
Mounting • Rails - engine / generator / radiator mounting [ ] Spring-type vibration isolator
• Rubber anti-vibration mounts (shipped loose) [ ] IBC Isolators
Starting/Charging • 24 volt starting motor(s) [ ] Battery chargers (10 amp)
• Batteries with rack and cables [ ] 45 amp charging alternator
• Battery disconnect [ ] Oversize batteries
[ ] Ether starting aid
General • Right-hand service [ ] CSA certification
• Paint - Caterpillar Yellow (except rails and radiators [ ] EU Declaration of Incorporation
that are gloss black) [ ] EEC Declaration of Conformity
• SAE standard rotation [ ] Seismic Certification per Applicable Building Codes:
• Flywheel and Flywheel housing - SAE No. 0 IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

2 July 10 2012 16:38 PM

STANDBY 880 ekW 1100 kVA
50 Hz 1500 rpm 400 Volts

SPECIFICATIONS

CAT GENERATOR CAT EMCP 4 SERIES CONTROLS

Frame size....................................................................... 1402 EMCP 4 controls including:
Excitation..................................................Internal Excitation - Run / Auto / Stop Control
Pitch.............................................................................. 0.6667 - Speed and Voltage Adjust
Number of poles...................................................................4 - Engine Cycle Crank
Number of bearings............................................................ 2 - 24-volt DC operation
Number of Leads.............................................................. 006 - Environmental sealed front face
Insulation....................... UL 1446 Recognized Class H with - Text alarm/event descriptions
tropicalization and antiabrasion Digital indication for:
- Consult your Caterpillar dealer for available voltages - RPM
IP Rating........................................................................... IP23 - DC volts
Alignment.....................................................Closed Coupled - Operating hours
Overspeed capability........................................................150 - Oil pressure (psi, kPa or bar)
Wave form Deviation (Line to Line)........................... 002.00 - Coolant temperature
Voltage regulator.............. 3 Phase sensing with selectible - Volts (L-L & L-N), frequency (Hz)
volts/Hz - Amps (per phase & average)
Voltage regulation............Less than +/- 1/2% (steady state)
- ekW, kVA, kVAR, kW-hr, %kW, PF
Less than +/- 1% (no load to full load)
Warning/shutdown with common LED indication of:
CAT DIESEL ENGINE - Low oil pressure
C32 TA, V-12, 4-Stroke Water-cooled Diesel - High coolant temperature
Bore........................................................ 145.00 mm (5.71 in) - Overspeed
Stroke..................................................... 162.00 mm (6.38 in) - Emergency stop
Displacement.........................................32.10 L (1958.86 in3) - Failure to start (overcrank)
Compression Ratio....................................................... 15.0:1 - Low coolant temperature
Aspiration........................................................................... TA - Low coolant level
Fuel System................................................................... MEUI Programmable protective relaying functions:
Governor Type....................................................ADEM™ A4 - Generator phase sequence
- Over/Under voltage (27/59)
- Over/Under Frequency (81 o/u)
- Reverse Power (kW) (32)
- Reverse reactive power (kVAr) (32RV)
- Overcurrent (50/51)
Communications:
- Six digital inputs (4.2 only)
- Four relay outputs (Form A)
- Two relay outputs (Form C)
- Two digital outputs
- Customer data link (Modbus RTU)
- Accessory module data link
- Serial annunciator module data link
- Emergency stop pushbutton
Compatible with the following:
- Digital I/O module
- Local Annunciator
- Remote CAN annunciator
- Remote serial annunciator

3 July 10 2012 16:38 PM

STANDBY 880 ekW 1100 kVA
50 Hz 1500 rpm 400 Volts

TECHNICAL DATA

Open Generator Set - - 1500 rpm/50 Hz/400 Volts DM9945

Low Emissions

Generator Set Package Performance

Genset Power rating @ 0.8 pf 1100 kVA
Genset Power rating with fan 880 ekW
Fuel Consumption
100% load with fan 243.2 L/hr 64.2 Gal/hr
75% load with fan 184.1 L/hr 48.6 Gal/hr
50% load with fan 126.0 L/hr 33.3 Gal/hr
Cooling System1
Air flow restriction (system) 0.12 kPa 0.48 in. water
Engine coolant capacity 55.0 L 14.5 gal
Inlet Air
Combustion air inlet flow rate 76.0 m³/min 2683.9 cfm
Exhaust System
Exhaust stack gas temperature 509.2 º C 948.6 º F
Exhaust gas flow rate 207.0 m³/min 7310.1 cfm
Exhaust flange size (internal diameter) 203 mm 8 in
Exhaust system backpressure (maximum allowable) 10.0 kPa 40.2 in. water
Heat Rejection
Heat rejection to coolant (total) 312 kW 17743 Btu/min
Heat rejection to exhaust (total) 951 kW 54083 Btu/min
Heat rejection to aftercooler 253 kW 14388 Btu/min
Heat rejection to atmosphere from engine 107 kW 6085 Btu/min
Heat rejection to atmosphere from generator 57.2 kW 3253.0 Btu/min
Alternator2
Motor starting capability @ 30% voltage dip 2297 skVA
Frame 1402
Temperature Rise 150 º C 270 º F
Lube System
Sump refill with filter 99.0 L 26.2 gal
Emissions (Nominal)3
NOx mg/nm3 1937.6 mg/nm³
CO mg/nm3 100.5 mg/nm³
HC mg/nm3 11.4 mg/nm³
PM mg/nm3 11.6 mg/nm³
1
For ambient and altitude capabilities consult your Cat dealer. Air flow restriction (system) is added to existing restriction from factory.
2
UL 2200 Listed packages may have oversized generators with a different temperature rise and motor starting characteristics. Generator
temperature rise is based on a 40ºC ambient per NEMA MG1-32.
3
Emissions data measurement procedures are consistent with those described in EPA CFR 40 Part 89, Subpart D & E and ISO8178-1 for
measuring HC, CO, PM, NOx. Data shown is based on steady state operating conditions of 77ºF, 28.42 in HG and number 2 diesel fuel
with 35º API and LHV of 18,390 btu/lb. The nominal emissions data shown is subject to instrumentation, measurement, facility and engine
to engine variations. Emissions data is based on 100% load and thus cannot be used to compare to EPA regulations which use values
based on a weighted cycle.

4 July 10 2012 16:38 PM

STANDBY 880 ekW 1100 kVA
50 Hz 1500 rpm 400 Volts

RATING DEFINITIONS AND CONDITIONS

Meets or Exceeds International Specifications: AS1359, Ratings are based on SAE J1349 standard conditions.
CSA, IEC60034-1, ISO3046, ISO8528, NEMA MG 1-22, These ratings also apply at ISO3046 standard conditions.
NEMA MG 1-33, UL508A, 72/23/EEC, 98/37/EC, Fuel rates are based on fuel oil of 35º API [16º C (60º F)]
2004/108/EC gravity having an LHV of 42 780 kJ/kg (18,390 Btu/lb)
Standby - Output available with varying load for the when used at 29º C (85º F) and weighing 838.9 g/liter
duration of the interruption of the normal source power. (7.001 lbs/U.S. gal.). Additional ratings may be available
Average power output is 70% of the standby power for specific customer requirements, contact your Cat
rating. Typical operation is 200 hours per year, with representative for details. For information regarding Low
maximum expected usage of 500 hours per year. Sulfur fuel and Biodiesel capability, please consult your
Standby power in accordance with ISO8528. Fuel stop Cat dealer.
power in accordance with ISO3046. Standby ambients
shown indicate ambient temperature at 100% load which
results in a coolant top tank temperature just below the
shutdown temperature.

5 July 10 2012 16:38 PM

 STANDBY 880 ekW 1100 kVA
50 Hz 1500 rpm 400 Volts

DIMENSIONS

Package Dimensions
Length Information not
Width available at this time.
Height

Advanced Diesel Engineering

14 Langthwaite Business Park
South Kirkby, Pontefract
WF9 3AP, UK
Telephone: +44 (0) 1977 658 100
Fax: +44 (0) 1977 608 111
E-mail: enquiries@adeltd.co.uk
Web: www.adeltd.co.uk