Sealant Info (PMS 02-04-00)

AIRBUS
Jf-mCI-SS ANO MA I f--RIAI Sl-'f--CII-ICA I ION
Technical Notes (TN)
□2-□4-□□
Sealing
:c::.;opynqht Airbus ::iA::i LUZ) :JMS []:)-[la-[ l[ l / ~IHl71 IIIJ1i::

AIRBUS
PROCESS AND MATERIAL SPECIFICATION
AIRBUS
A00710010
TECHNICAL NOTES (TN)
SEALING
Published and distributed by :

AIRBUS S.A.S.
ENGINEERING DIRECTORATE
31707 BLAGNAC Cedex
FRANCE
Issue AJ Page 1
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 1 von 114
AIRBUS
AIRBUS
A00710010
CONTENTS
PART ONE:
1. GENERAL
1.1 Introduction
1.2 Non metallic materials affected by this technical note
1.3 Application of the technical note
1.3.1 By the engineering
1.3.2 By other departments (procurement, production,customer services)
2. TABLES OF QUALIFIED-EQUIVALENT AND SUBSTITUTE MATERIALS
2.1 Definition of the columns

2.1.1 Ref
2.1.2 Natco
2.1.3 Material
2.1.4 Standard or specification
2.1.5 Individual Product Specification
2.1.6 Manufacturer
2.1.7 Product Designation
2.1.8 EHS status
2.1.9 Drawing designation
2.1.10 Process Specification
2.1.11 Equivalent or Substitute
2.1.12 Comments
2.1.13 No longer to be used
Issue AJ Page 2
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 2 von 114
AIRBUS
AIRBUS
A00710010
3. SUMMARY OF SEALANT APPLICATIONS
3.1 Sealing
3.1.1 Sealing of pressure cabins
3.1.2 Sealing of fuel tanks
3.1.3 Sealing against penetration of condensed water or other liquids in:
3.1.4 Sealing of wet areas in order to prevent liquids leaking out of respective areas (floor
sealing: galley, toilet, entrance areas)
3.2 Protection against corrosion
3.3 Various applications

4. Procedure for selecting sealants
4.1 Application of Sealant
4.1.1 Interfay Sealant
4.1.2 Fillet
4.1.3 Overcoating of Fastener Ends and Joints Fillet Area
4.1.4 Filling of Cavities (Interior and Exterior)
4.1.5 Wet Installation of Fasteners (See TN A.007.10003)
4.2 General Characteristics of Commonly used Sealants

5. Entries on drawings
5.1 Airbus France Procedure
5.2 Airbus Germany Procedure
5.3 Fokker Procedure
5.4 Airbus UK Procedure
5.5 Sonaca Procedure
5.6 Airbus Spain Procedure
Issue AJ Page 3
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 3 von 114
AIRBUS
AIRBUS
A00710010
PART TWO:
1. General definition of sealing areas
2. General sealing principles
2.1 Interfay Sealing

2.2 Wet Installation of Fasteners
2.3 Fillet sealing
3. Sealing of bonded sandwich structures

3.1 General
3.2 Sealants to be used
4. Airbus France sealing policy for A300 and A310
4.1 Sealing in non-pressurised areas

4.2 Sealing in pressurised areas
4.3 Sealing in fuel tank areas
4.4 Sealing in high pressure areas (engine APU)
5. Details of sealing instructions and partner responsibility

5.1 Responsibility e Airbus France
5.2 Responsibility e Airbus Germany
5.3 Responsibility e Fokker
5.4 Responsibility e Sonaca
6. Equivalence between the new and old sealing codification
PART THREE:
Selection tables
Issue AJ Page 4
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 4 von 114
AIRBUS
AIRBUS
A00710010
PART ONE:
SEALANTS
Issue AJ Page 5
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 5 von 114
AIRBUS
AIRBUS
A00710010
1. General
1.1 Introduction
This technical note is one of a series of TN’s concerning the selection for Sealants used on aircraft parts.
This technical Note provides the list of couples “materials/suppliers” which have been technically qualified
according to AIRBUS qualification process
This Technical Note is written in accordance with ABD0045.
1.2 Scope
This document is based on sealing directives according to TN A.007.10003. Sealing principles for A300 and
A310 aircraft are detailed in Part two. For sealing principles for other aircraft, refer to the relevant documents
as follows:
For A320 see TDD 51.S.001D

For A321 see TDD 51.S.001E
For A330 see TDD 51.A.001G
For A340 see TDD 51.A.001F
For A380 see TDD 51.A.001L
For A350 see TDD 51 A 001V
This document incorporates all sealants and their respective uses on the aircraft (see Para. 2), thus
summarising in one document all sealants, equivalent materials, and substitute materials used on the
aircraft.
However, only those sealing applications concerned with preventing penetration of liquids are dealt with in
detail.
Other sealing applications are only indicated with reference to the document covering these applications.
1.3 Non metallic materials affected by this Technical Note

They are divided into the following categories:
Individual chapter references per document to be added here in the format:
Material A ( abcdef….xyz) (references used : 1,2,3,4,…; new references to be used : 1 to …)
Material B ( def…rstu ) (references used : 11,12,13,14,…; new references to be used : 20 to …)
In brackets:
the reference numbers previously allocated to each material family and shown in the selection tables,
The new references to be allocated to material families qualified in future (in order to organize the table
of qualified-equivalent and substitute materials).
Issue AJ Page 6
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 6 von 114
AIRBUS
AIRBUS
A00710010
1.4 Application of the Technical note
1.4.1 Engineering
Engineering shall use only the materials listed in this document, according to the following conditions:
New programs (A400M, A350 and further):
Selection of materials is provided by MPSL (Materials and Processes selection List) and SSL (Standard
Selection List) as mandatory first choice during development phase. The content of this TN is applicable
for serial production when step MG13 has been reached by the relevant program.
Legacy programs (All Airbus, A380 included):
This TN lists the materials to be used for Engineering operations on serial programmes
For both cases, instructions to be given on drawings:
These instructions are mentioned in the column « Drawing Designation » (see sub-clause 2.1.7).
1.4.2 By Other Departments (Procurement, Manufacturing, Customer Services,..)

Procurement is made by means of the indications given on the drawings:
specification references,
or other references.
Manufacturing requirements are given in the process documents mentioned in the process specification
column of the tables.
For Customer services uses, this TN provides interchangeability informations for replacement of a material in
case of obsolescence, supply restrictions or difficulties, and/or any Engineering statement on the usage of a
given material or product.
Note: Missing specifications are in the process of being prepared. If a Natco has to produce a part to a drawing
of another Natco and no equivalent material is available in that Natco’s company, the procurement shall be
carried out using the specification quoted on the drawing.
Issue AJ Page 7
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 7 von 114
AIRBUS
AIRBUS
A00710010
2. Tables of qualified-equivalent and substitute materials
2.1 Definition of the columns
2.1.1 Ref
Identification number of row
2.1.2 Natco
Airbus sites where the product was originally qualified
2.1.3 Material
Definition of the material family which consists of a brief description of the material.
2.1.4 Standard or Specification

Defines the corresponding material specification (e.g: AIMS) or semi-finished product standards (e.g: ABS)
used during the technical qualification and inspection are stated in this column.
2.1.5 Individual Product Specification column

It contains the release specification. The Individual Product Specification (e.g :IPS) identifies a product from a
manufacturer that have been technically and successfully qualified
Examples:
IPS for all Airbus Natco
2.1.6 Manufacturer
The manufacturer name of the product is stated in this column.
Note: If needed by the business, Cage Code of the manufacturer production site may be added between
bracket sunder the name of manufacturer
2.1.7 Product Designation

The manufacturer’s product reference is stated in this column.
2.1.8 EHS Status

Value of EHS assessment: Low, Medium or High. When no assessment performed: Not assessed
2.1.9 Drawing designation

The drawing designation corresponds to the reference of standard (ABS semi-finished product) or material
code (e.g PQ, Z,.) to be used on the drawing.
2.1.10 Process specification

Defines the corresponding the process requirements document to be used for manufacturing operations.
example:
AIPS for all Airbus Natcos.
Issue AJ Page 8
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 8 von 114
AIRBUS
AIRBUS
A00710010
2.1.11 Equivalent or substitute

Each qualified product is allocated to an alphanumeric reference which appears in the ‘’equivalence column’’.
This reference is composed of a number and a letter (1A, 1B).
The number is the same as the reference number which appears in the first column.
The letter gives the equivalence between the qualified products which belong to the same material family
(same reference number).
The equivalent products which belong to the same material family have the same alphanumeric reference.
The products which belong to the same material family but which are not equivalent have the same reference
number but different letters.
The products which are not equivalent are separated by a broken line.
In some cases, products from the same material family are not strictly equivalent because they can’t be used
for the same application (i.e. certification problems or process peculiarities).
2.1.12 Comments
When a box in the Remarks / application column is empty this indicates that there are no restrictions on the
use of the material.
Notes e.g.: When applicable the box may contain:
No longer available,
To be used for’’.... ‘’only,
Obsolescent (not to be used for new designs).
2.1.13 No longer to be used

When the product is no longer used by the Airbus NatCo, the name of the NatCo
is mentioned in this column. The reason is mentioned in the “comments” column
3 Summary of sealant applications
3.1 Sealing
3.1.1 Sealing of Pressure Cabins

Maintenance of cabin pressure.
Sealing the joints of the exterior aircraft surfaces against the penetration of water.
In the event of a fire to reduce the flow of oxygen, a flame enhanced.
3.1.2 Sealing of Fuel Tanks
3.1.3 Sealing against penetration of condensed water or other liquids in:

Riveted, bolted or welded joints (metallic and composite components).
Metallic or non-metallic sandwich structures.
All parts attached to the aircraft skin.
Issue AJ Page 9
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 9 von 114
AIRBUS
AIRBUS
A00710010
3.1.4 Sealing of wet areas in order to prevent liquids leaking out of respective areas (floor sealing:
galley, toilet, entrance areas)
3.2 Protection against Corrosion
Protection against fretting corrosion to increase the life of the structural parts exposed to fatigue or
vibration.
Protection against galvanic corrosion of structural parts composed of different materials.
All skin joints and parts attached to the A/C skin.
"Wet" installation of fasteners (Ref. TN 00//A.007.10003 and relevant TDD to Airbus types, for A350 see
relevant RSDP).
"Wet" installation of anchor nuts in galley, entrances, lavatories and under floor cargo compartment areas.
Protection against corrosion of metal to metal adhesive bonding.
All joints in corrosion critical areas.
Protection of electrical bonding attachments.
3.3 Various Applications
As a cavity filler and as an aerodynamic filler.

Protection of some surfaces (housings, channels, tubes, electrical wiring)
(Ref. TN 00//A.007.10003).
Coating of electrical components
Adhesive bonding of some non-structural parts (Ref. TN 00//A.007.10054).
4 Procedure for selecting sealants
4.1 Application of Sealant

The sealants are applied according to the area and type of application.
4.1.1 Interfay Sealant

A layer of sealant applied between the mating faces of assemblies required to be sealed. With this kind of
assembly, the sealant is squeezed out in order to ensure that complete assembly sealing has been achieved.
Note: The entire length of the joint must be checked for the presence of excess sealant.
~
' .
Issue AJ Page 10
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 10 von 114
AIRBUS
AIRBUS
A00710010
4.1.2 Fillet
A filler is produced when sealant is faired smoothly into gaps or into corners in structures. The fillet may be
formed either from squeezed out interfay sealant or from an extra bead of higher viscosity sealant. The
dimension of the fillet shall be related to the metal sheet thickness.
Metal sheets (thickness <2mm): the width of the bead seal must be equal to the thickness of the metal
sheet.
Metal plates: unless there are special instructions on the drawing the bead of sealant must not exceed
5mm. In general the bead must be sufficiently large to ensure proper sealing.
Note: Fillets shall be protected with a varnish or hydraulic fluid resistant product in areas likely to be
contaminated by hydraulic fluids.
4.1.3 Overcoating of Fastener Ends and Joints Fillet Area

A coat of sealant applied by brushing over fastener ends or fillet areas. Fasteners and fillets at joints shall be
overcoated with sealant, paint and/or varnish according to requirements.
Issue AJ Page 11
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 11 von 114
AIRBUS
AIRBUS
A00710010
4.1.4 Filling of Cavities (Interior and Exterior)

All cavities between parts shall be filled with a suitable sealant.
4.1.5 Wet Installation of Fasteners (See TN A.007.10003)

Wet installation of fasteners is obtained by installation of a fastener with a sealant:
For interference fit fasteners, apply sealant to the countersink under the head.
For clearance fit fasteners, apply sealant to the shank.
For drivmatic fasteners, wet assembly must be performed if possible.
4.2 General Characteristics of Commonly used Sealants

Generally the following sealants are used:
Polysulphide for the areas where the temperature is < 80°C.
Corrosion inhibiting sealant may be used for areas subject to conditions which may promote corrosion.
Silicone for higher temperature applications.
Issue AJ Page 12
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 12 von 114
AIRBUS
AIRBUS
A00710010
Table 1: General characteristics of commonly used sealants
Property Polysulphides Silicones
Maximum temperature for short term

120°C 250°C
exposure
Maximum temperature for long term 80°C (100°c for heat resistant
200°C
exposure grades)
Adhesion to CAA or Alodine coated

Good Use silicone primer
aluminium
Adhesion to epoxy coated metal Good Use silicone primer
Adhesion to polyurethane coated

Good Use silicone primer
metal
Adhesion to silicone coated metal Bad Good
Hardness (shore) 40 - 60 25 - 60
Resistance to water Good Good
Resistance to fuel Good Bad
Resistance to phosphate ester Bad: varnish to

Poor
hydraulic fluid TN.00//A.007.10050
Issue AJ Page 13
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 13 von 114
AIRBUS
AIRBUS
A00710010
5. Entries on drawings
5.1 Airbus France Procedure
A300/A310
The drawing shall contain a reference to TN 00//A.007.10010 which consists of two parts:
Part One: Selection of Sealants and Equivalence between the Old and New Codes (refer to Part 3 and
Appendix).
Part Two: Sealing Principles
- Outline of Principles according to Aircraft Sections
- Typical Application
- Details of Sealing Instructions given on specific Drawings
The drawings define the joints that require sealing and provide a diagrammatic representation of each joint to
be sealed together with an indication of the sealant to be used.
A319/A320/A321/A330/A340
No reference is made to TN A.007.10010, only sealant codes are called up. Design directives are given in the
relevant MTS.
5.2 Airbus Germany Procedure

A300/A310
Special drawings for sealing have been prepared based on TN 00//A.007.10010.
A319/A320/A321/A330/A340
The surface protection codes defined in TN A.007.10003 are quoted on the drawing. Sealants are shown in
the drawing parts list.
Issue AJ Page 14
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 14 von 114
AIRBUS
AIRBUS
A00710010
5.3 Fokker Procedure

TN 00/A.007.10010 is not referred to on the drawing and instead, reference is made to the internal document
TH 1.400.
Fokker is responsible for ensuring that the requirements of TH 1.400 are equivalent to those of TN
00//A.007.10010 which has been jointly adopted by the Materials Committee. For each aircraft section or
assembly, documentation will be prepared which includes:
A general drawing of the assembly showing the joints to be sealed.
A detailed drawing of the joints to be sealed showing the sealant to be used.
5.4 Airbus UK Procedure

No reference is made to TN 00//A.007.10010 on the drawings. The specific locations of the different sealants
required are shown on the drawing. Details of specific sealants to be applied and their method of application
are given by direct reference to the appropriate specifications.
The primary documents to which reference is made on the drawings are:
ABP 4-5141: Application of sealant for integral fuel tanks
ABP 4-5142: Application of sealant for general aircraft structure
BAe is responsible for ensuring that the requirements of their documents are equivalent to those of TN
00//A.007.10010.
5.5 SONACA Procedure

No reference to TN 00//A.007.10010 is made on the drawings.
A310/A319/A320/A321 - The sealing methods and the sealants to be used are defined on the drawings.
A330/A340 - The sealing principles are given in PS 6.5304.01 and the sealants to be used are directly indicated
on the drawings.
The methods for application and curing of these sealants are explained in the appropriate Process
Specification (specified on the drawings for A310/A319/A320/A321 or through PS 6.5304.01 for A330/A340).
Belairbus is responsible for ensuring that the requirements of their documents are equivalent to those of TN
00//A.007/10010.
5.6 Airbus Spain Procedure

Normally no reference is made to TN 00//A.007.10010 on the drawings. The specific sealants to be applied
and their method of application are specified on the drawing by the Z-16XXX code number together with direct
reference to the appropriate Process Specification. The primary documents to which reference is made on the
drawing are as follows:
I + D - P - 146: General Sealing
I + D - P 62: Sealing of Fuel Tanks
Issue AJ Page 15
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 15 von 114
AIRBUS
AIRBUS
A00710010
PART TWO:
SEALING PRINCIPLES FOR A300 AND A310
Issue AJ Page 16
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 16 von 114
AIRBUS
ATION
PROCESS AND MATERIAL SPECIFIC
AIR BU S
A00710010
1. General definition of sealing areas
Sealing against air, water and fuel.
Non-pressurised area outside tanks Sealing against corrosion
Sealing against fuel (tanks)
Sealing against water and air (pressurised cabin)
Section 21 (center wing box and horizontal stabiliser) to be classified with one of two
sealing definitions depending on the version of the aircraft.
For one version, section 21 is a fuel tank and sealing is according to the principles governing the
sealing of tank areas.
The aircraft structure is classified into categories according to the potential for corrosion. These
categories are defined in TN A007.10003.
Issue AJ Page 17
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 17 von 114
AIRBUS
AIRBUS
A00710010
2. General sealing principles
2.1 Interfay Sealing

Interfay sealing is used at least for parts of assemblies in the following areas:
Corrosion critical areas (Environmental Category C).
Parts attached to the a/c skin.
Where dissimilar materials producing galvanic effect are in contact e.g. aluminium alloy to carbon
fibre joints.
Fatigue loaded joints.
All joints involving CFRP part.
Fuel tank envelope.
Unbonded stringer ends at fuselage assembly sections, interfay sealant is injected between the
stringer and skin.
Interfay sealant is not used in the pylon structure in areas subject to hydraulic fluid or fuel exposure.
2.2 Wet Installation of Fasteners

Wet installation is used in at least the following situations:
All steel fasteners
All fasteners passing through the fuselage skin as follows:
in bonded joints,
below fuselage stringer 25 for galley, lavatory and entry areas,
below cargo floor under stringer 43.
Holes in CFRP parts.
Engine pylon area.
Interference fit fasteners are assembled with sealant in the countersink except in the case of drivmatic
riveting.
Anchor nuts are assembled with sealant in the interfay joint between the nut plate and the structure in
the areas of the cargo hold, entrances, galleys and lavatories.
Issue AJ Page 18
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 18 von 114
AIRBUS
AIRBUS
A00710010
2.3 Fillet sealing

Fillet sealing is used at least for parts of assemblies in the following areas:
All lap joint bond lines.
Stringer bond lines in Environmental Category C areas.
Riveted stringers under cargo floor where exposed to hydraulic fluid.
Joints subject to drivmatic riveting where interfay sealant cannot be applied.
Pylon joints where interfay sealant is not applied.
External sealing of composite sandwiches where required.
Aluminium alloy to carbon fibre bond lines.
Assemblies of dissimilar materials where required.
Non-flush parts of Aerodynamic surfaces.
In areas likely to be subject to hydraulic fluid contamination, sealant fillets are overcoated with a
hydraulic fluid resistant coating.
Issue AJ Page 19
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 19 von 114
AIRBUS
AIRBUS
A00710010
3. Sealing of bonded sandwich structures
3.1 General
3.1.1 Necessity for Sealing

Bonded sandwich structures require sealing in all areas exposed to weather conditions (exterior areas)
and areas where condensation may occur (areas under the fuselage skin) to prevent:
Increase in weight due to penetration of moisture into bonded connections through bonding flashes
or through bonding flashes or through localised construction weaknesses in certain areas of
assembly (e.g. corners), through coatings (e.g. multi-layer coatings).
Corrosion of honeycomb formation in metallic sandwich structures.
Those cases requiring special attention are identified with an X in the table below:
Honeycomb Danger of penetration of moisture into:

Coating
structure
connections coatings
Metallic x -
Metallic
Multi-layer* x x
Metallic x -
Nomex
Multi-layer* x x
* Mixed connections of this type should be avoided.
3.1.2 Examination of Sealing

Bonded sandwich structures will be inspected. The inspection procedures vary according to importance
and type of structure.
3.1.3 Sealing of Honeycomb Assemblies

Sealing can be accomplished:
a) By suitable design:
Parts should be designed in the following way:

Critical points which require sealing should be reduced to a minimum. The use of fasteners
connected into honeycomb structure should be avoided.
Provision must be made to allow practical application of sealant where it is required.
The required sealant must be stated.
b) In some cases during manufacture, sealant can be applied into corners, channels, etc.
c) In special cases by means of sealant bead applied from the outside to the finished part.
d) By suitable skins (for non-metallic skins)
An adequate type and number of layers shall be used. In addition, special protective layers (e.g. Tedlar,
surface adhesive) should be provided to ensure the required level of protection.
Issue AJ Page 20
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 20 von 114
AIRBUS
AIRBUS
A00710010
3.2 Sealants to be used

Refer to Section 3 for sealants to be used.
4. Airbus France sealing policy for A300 and A310
4.1 Sealing in non-pressurised areas
4.1.1 Lap Joints of Metal Sheets

Sealing is necessary to increase life of structural parts exposed to fatigue and to corrosion.
Aerodynamic Filler
Interfay Sealant
In Categmy C area
Interfay Sealant
Interfaying surface sealing as follows:

Pre-mod 2727; paint and conventional polysulphide sealant
Post-mod 2727; paint and chromate loaded polysulphide sealant
Issue AJ Page 21
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 21 von 114
AIRBUS
AIRBUS
A00710010
4.1.2 Reinforced Butt Joint
Interfay Sealant
Aerodynamic Filler
Interfay Sealant
In C area only
Fillet Sealant
\!~
\ _ Aerod;rnamic Filler
Issue AJ Page 22
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 22 von 114
AIRBUS
AIRBUS
A00710010
4.1.3 Connection between Pressurised and Non-Pressurised Sections
Section 15 FR54
Non.Pressurised section Pressurised section
lnterfay Sealant
Aerodynamic Filler
4.1.4 Structural Doublers

As for pressurised areas, the use of interfay sealant is necessary when the components are exposed:
To corrosion (Category C areas Ref. TN 00//A.007.10003).
Or susceptible to fatigue or vibration.
4.1.5 Doubler Assembly with Automatic Riveting

Apply interfay sealant (e.g. No. 20).
or
When interfay sealant cannot be applied (depending on the nature of the parts to be assembled):
The protection of the joint must be adequate e.g. chromic acid anodising + paint.
The sealing is achieved by sealant beads and in Category C areas the fasteners, which are
installed wet, are covered with sealant.
Fillet Sealant
4.2 Sealing in pressurised areas
4.2.1 Lap Joints

Interfay sealant is necessary
Issue AJ Page 23
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 23 von 114
AIRBUS
AIRBUS
A00710010
a) Lap joint with bonded doublers (Sections 12-13-14-15 upper 16-17-18)
Adhesive Film
lnterfay Sealant
Fuselage Skin
Fillet Sealant
\ \------ Fillet Sealant

Bonded Doubler
~ Bonded Doubler
Interfay Sealant
- - Stringer
Fuselage skin in C2 areas

with overlapping sealant beads.
Bonded Doubler
Adhesive Film
Fillet Sealant ~
~ Fillet Sealant
\ \ _ Booded DoW>I~
Fillet Sealant
Double r Jnterfay Sealant
Interfay Sealant
Issue AJ Page 24
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 24 von 114
AIRBUS
AIRBUS
A00710010
Connection with door frame panel

In Category A area
Fu~elage Skins ~ dhesivc Film
Dom Frame Panel _J L Fillet Sealant
Bonded Doubler
Interfay Sealant
a) Connection of machined panels
- In category A area
lnterfay Sealant
b) Connection of machined panel and lateral panel with window panel
ex: STRINGER 22
In Category A area
Adhesive Film
Lateral Panel
Fillet Sealant ~ Interfay Sealant
~ Window Doubler
Issue AJ Page 25
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 25 van 114
AIRBUS
A00710010
AIRB US
c) Connection with doorframe panel
In Category C area
- In Category C area
Adhesive Fi lm
Fuselage Skins
. I
Door Frame Panel - - I
Fillet Sealan1
l
I Bonded Doubler
Interfay Sealan~
lnterfay Sealant
d) Connection of machined panels
In Category C area
Interfay Sealant - - Stringer
e) Connection of machined panel and lateral panel with window panel
ex: STRINGER 22
In Category C area
Adhesive Film
/ Lateral Panel
Fillet Sealant ~ Interfay Sealant
~ Window Doubler
Machined Panel
Issue AJ Page 26
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 26 von 114
AIRBUS
AIRBUS
A00710010
f) Scarfing of metal sheets
Interfay Sealant - - - - -
g) Circumferential joints with bonded skin
In Category C
Fuselage Skin
Circumferential
Fillet Sealant Bonded Doubler
Adhesive·Film
Section 13/14
Issue AJ Page 27
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 27 von 114
AIRBUS
AIRBUS
A00710010
h) Circumferential joints with machined panels
In Category A area
Interfay Sealant
Circumferential
Bonded Doubler
Aerodynamic Filler
Adhesive•Film
In Category C area
Interfay Sealant
Fillet Sealant
Circumferential
Bonded Doubler
I
Aerodynamic·Filler
Adhesive Film
Interfay Sealarit
Fillet Sealant _ Circumferential
~ - -- - - -"-----..............l-\........-1-....,.-1-.........--....;~ Bonded Doubler
Adhesive Film
Issue AJ Page 28
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 28 von 114
AIRBUS
AIRBUS
A00710010
4.2.2 Structural Doubler

The use of interfay sealant is necessary when the components are exposed:
To corrosion (Category C areas Ref. TN 00//A.007.10003).
Or susceptible to fatigue or vibration.
4.2.2.1 Stringer / Fuselage Skin

- In Category A area
Bonded Stringer (Strs I to 25)
In Category C area
Fillet sealant
Bonded Stringers under passenger floor
In Category A area
Interfay Sealant
Riveted Stringers above cargo companment floor
Issue AJ Page 29
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 29 von 114
AIRBUS
AIRBUS
A00710010
In Category C area
lnterfay Sealant - - -
Riveted Slringers rn Bilge areas
In areas likely to be exposed to Skydrol immersion, it is requested to complete the sealing with
sealant fillet.
The sealant must be protected by varnish.
Varnish TN 10050 - No. 53
lnterfay Sealant
4.2.2.2 Frame / Skin

a) Frame with cutouts for stringers
Detail l
II I
II I
- - - - - - - -''-- - - - I- - - - - -
- - - - - - - 11- - - -
II
1- - - - - -
I
I
Frame
- - Skin Detail I
Issue AJ Page 30
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 30 von 114
AIRBUS
AIRBUS
A00710010
b) Frames without cutouts
Varnish TN 10050 No. 53
II • I
II I
I I I
In bilge area : Interfay Sealant

above cargo companment floor : II I
II I
Interfay Sealant
\\ \
II I
4.2.2.3 Bulkhead
Adhesive Film
Bonded Doubler \
Fillet Sealant
Pressurised Section
Frame 1
Aerodynamic Filler
Interfay Sealant
Issue AJ Page 31
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 31 von 114
AIRBUS
AIRBUS
A00710010
4.2.2.4 Frame Splice
* Above passenger floor: No sealant

A-A
* Between passenger floor and
compartment cargo floor: Interfay sealant e.g.
No. 20.
* In bilge area: ------=ir-=-=~-
Interfay sealant e.g. No. 20 :_-.. -..JC.=--:.-:.-:.
A- f
'
4.2.2.5 Stringer Junction

* Between passenger floor and compartment cargo
floor: Interfay sealant e.g. No. 20
* In bilge area: Interfay sealant e.g.
No. 20
4.2.2.6 Cleat/Frame and Cleat/Stringer Joints
t-- B B-B A-A
---~---------------------
jot,--,- - - - - - - - - - - - - - - -,.--~ -
I : I I
I I I I
1 ~ Frame 1+ ,
_/
,-------------
1+ + + + + +
I
Cleat

* Under passenger floor: Interfay sealant e.g. No. 20
The use of sealant at cleat/frame joints is restricted to C areas for AS.
Issue AJ Page 32
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 32 von 114
AIRBUS
PROCESS AND MAT ERIA L SPECIFICA
TION
AIR BU S
A00710010
4.2.2.7 Stringer Stabiliser

* Between passenger floor and cargo compartment floor interfay sealant e.g.
No. 20
* In bilge areas: Interfay sealant e.g. No. 20
4.2.3 Seat Track
~
TESA .MOLL. 700 or
Tape ABS 5006
See TN A.007 . 10.059
Fill« S,,ra,,.
Issue AJ Page 33
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 33 von 114
AIRBUS
AIRBU S
A00710010
4.2.4 Under toilet or galley areas
Interfay Sealant
LLeak Rerovo,y
4.2.5 Equipment Brackets
4.2.5.1 Equipment Brackets fixed on the Structure

Interfay sealant is necessary for the brackets fixed directly on the structure in Category C area.
Unless otherwise called for on the drawing, it is not required in Category A areas.
Interfay will not be applied in Category A areas.
~ Interfay Sealant
4.2.5.2 Equipment Brackets not fixed to the Structure

Unless otherwise stated on the drawing, sealant is not required.
Issue AJ Page 34
November 2021
Aug 01/22
Seite 34 von 114
A 007 10010 I PMS 02-04-00
AIRBUS
AIRBUS
A00710010
4.3 Sealing in fuel tank areas

Sealing is attained in general by the application of interfay, fillets and overcoating joint edges and
fastener heads.
A vapour seal approved to TN A.007.10133 with a flexible paint will be applied on the top of the Section
21 to avoid contamination with fuel vapours.
In final production line to improve adhesion before sealant application, clean the following areas and
apply an adhesive promotor (e.g. PR 148AF).
On fillets
Over nut caps
In interfay limited to critical zones at Rib 1 such as:
* Main corner fittings,
* Front spar on access door installation,
* Rear spar vertical junction.
Issue AJ Page 35
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 35 von 114
AIR BU S
PR OC ES S AN D MA
TE RI AL SP EC IFI CA
TIO N
A IR B U S
A00710010
4.3.1 Bolted Stiffener
Va po ur Seal PQ.10.05
-0.026.00 nterfay Sealant
erm an en t Joints)
I
Sealant Overcoat
Fuel Fuel
Sealant Overcoat
Fu el Fu el
Fil let Sealant
I
Int erf ay Se ala nt
Issue AJ Page 36
November 2021
Aug 01 /22
A 007 10 01 0 I PM S Seite 36 vo n 11 4
02 -04 -00
AIRBUS
AIRB US
A00710010
4.3.2 Stiffener Assembled by Automatic Riveting
SECTIO N21
Overcoa t Sealant
Fillet Sealant
Overcoa t Sealant
Wing
Paint / Sealant
Fillet Sealant
Paint / Sealant
4.3.3 Rib
Overcoat Sealant
Interfay Sealant
illet Sealant
Issue AJ Page 37
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 37 von 114
AIRBUS
AIRBUS
A00710010
Air
lnterfay Sealant
, I ,
'1--""I"
:j Fillet Sealant
Overcoat Sealant
Fuel
Issue AJ Page 38
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 38 von 114
AIRBUS
AIRBUS
A00710010
4.3.4 Front Spar
Fil Fillet Sealant
Air
Air Interfay Sealant
4.3.5 Panel Connections
Fuel Fuel
Fillet Sealant
Issue AJ Page 39
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 39 von 114
AIRBUS
AIRBUS
A00710010
4.3.6 Separation of Fuel Tanks: Rib No. 9
Fuel Fuel
Overcoat Sealant
Air
Bottom Skin Joint at Rib 9
4.3.7 Fillet for Fuel Tank bottom
Fillet Sealant
Issue AJ Page 40
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 40 von 114
AIRBUS
AIRB US
A00710010
4.4 Sealing in high pressure areas (engine APU)

Sealing is obtained with silicone sealant suitable for use up to 250°C.
The use of interfay sealant is prohibited in the fuel areas and in the hydraulic fluid areas because the
resistance to fuel is bad and the resistance to hot hydraulic fluid is limited.
Sealing is obtained with fillets.
4.4.1 Assembly of Primary Structure
Upper Spar between Rib 1 and Rib 13 Fillet Sealant
Issue AJ Page 41
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 41 von 114
AIRBUS
AIRBUS
A00710010
Lower and upper surface fittings - front spar and rear spar
Upper Surface Profile
------~r---,, ---,- r---___ :=----=-=---=

+ :I/1 + :1::.: + :: 1~r--
:, +
+ +
II
+ : + i.! ~,,f
I I
,
I
+ -b
I
r
I
*
11
Possibility of using Hollow Bolt to inject

Fillet Sealant for complete filling of cavities
..,
I..
C:
Issue AJ Page 42
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 42 von 114
AIRBUS
AIRBUS
A00710010
4.4.2 Assembly of Secondary Structure
4.4.2.1 Sealing of lower fire protection plate at the level of forward fire bulkhead
The lefthand side of this area must be sealed against fuel and hydraulic fluid up to a height of 100
mm.
Principle : General case

Sealants to be used
As Sealant beeds:
Fillet Sealant
Structure Example:
Structure Example :
Lower Fire Bulkhead
- - Lower Fire Bulkhead

LHDividing
Panel
J
Lower Sealing
Surface
ti t I I ,j ? it
' ".1 . . ,
Lower Fire Protection Web
Issue AJ Page 43
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 43 von 114
AIRBUS
AIRBUS
A00710010
Lower Spar NaceUe Closure
Sealing Surface
~ Lower Fire Protection Web
LHSpar Fire Bulkhead
Issue AJ Page 44
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 44 von 114
AIRBUS
AIRBUS
A00710010
4.4.2.2 Lower Fire Protection Plate at Level of Normal Section
Bearing Fitting
Fitting
;---
- - Reinforcement
4.4.2.3 Sealing at Level of Rib 10
Rib 10
LH Dh-icling Panel
Sealing Parts
Lower Metal Web
Issue AJ Page 45
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 45 von 114
AIRBUS
AIRBUS
A00710010
5. Details of sealing instructions and partner responsibility
5.1 Responsibility Airbus France
A310-200
Sections B2 B4 A300-600
A310-300
00//A.007.10087 00//A.007.10087 00//A.007.10087 00//A.007.10087

11
Sheet 1 Sheet 1 Sheet 1 Sheet 1
00/A.007.10087 00/A.007.10087 00/A.007.10087 00/A.007.10087

12
Sheet 2 Sheet 2 Sheet 2 Sheet 2
13
14
15 15/A.538.11046 15/A.538.11046
15/A.538.10445 15/A.538.10446
21 21/A.571.12004 15/A.571.12004
Landing gear
15/A.538.10094 15/A.528.10094 15/A.528.10094 15/A.528.10094
doors
Connection of
section 14/15
45/A.538.11045 45/A.538.11045 45/A.538.11045 45/A.538.11045
15/16
Wing/fuselage 45/A.571.12222
Removable
26/A.577.10058 26/A.577.10093
surface
62/A.572.10244
Hydraulic panel
62/A.572.10245
Engine pylon
Pylon P and W: A.540.10320
Drainage at the bottom of Section 15: 15A/219.33040
Issue AJ Page 46
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 46 von 114
AIRBUS
AIRBUS
A00710010
5.2 Responsibility Airbus Germany

10//A.537.70738 beginning at A/C 157
10//A.539.70616
16//A.539.70563
17//A.539.78011
18//A.539.80393
19//A.539.87999
13//A.537.70240, T.1 & 2 A/C 156 only
14//A.521.70001
14//A.537.75240, T.1, 2 & 3 et 14//A.537.75200, T.1, 2 & 3 to A/C 156
14//A.537.70240, T.1, 2 to A/C 156
5.3 Responsibility Fokker

Low speed aileron 28.A.576-60999
All speed aileron 28.A.576-61499
Wing tip 29.A.572-60299
Spoiler 26.A.577-61999
Air brake 26.A.577-62499
Liftdumper 26.A.577-62999
Slat I 24.A.578-63999
Slat II 24.A.578-64999
Slat III 24.A.578-65999
Inner flap and trim tab 27.A.579-66999
Outer flap and trim tab 27.A.579-68999
Center flap and trim tab 27.A.579-67999
Flap track fairing 27.A.579-69799
Main U/C leg fairing door 25.A.528-69899
5.4 Responsibility Sonaca

A.578.43676.01
A.578.43676.02
A.578.43676.03
A.578.43676.04
A.578.43676.05
A.578.43676.06
A.578.43676.07
A.578.43676.08
A.578.43676.09
A.578.43676.10
A.578.43676.11
A.578.43676.12
A.578.43676.13
A.578.43676.14
Issue AJ Page 47
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 47 von 114
AIRBUS
AIRBUS
A00710010
6. Equivalence between the new and old sealing codification
Old code New code
Sealing in pressurised and non-pressurised areas:
EG-B (general case) Fillets, filling PQ 10010-003-00

Interfay PQ 10010-001-00
ES (large area) PQ 10010-001-00
ED-B (removable components) PQ 10010-002-00
EG-A (general case) PQ 10010-005-00
EE (covers for electrical elements) Not used
EP (acrylic components) Not used
Sealing in tank areas:
ER-B Interfay PQ 10010-050-00

Fillets, filling PQ 10010-052-00
ES (large area) PQ 10010-050-00
ER-A PQ 10010-053-00
Issue AJ Page 48
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 48 von 114
AIRBUS
AIRBUS
A00710010
PART THREE:
SELECTION TABLES
Issue AJ Page 49
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 49 von 114
AIRBUS
AIRBUS
A00710010
No
Individual Equivalent
Standard or EHS Drawing Process longer
Ref Natco Material Product Manufacturer Product Designation or Comments
Specification Status Designation Specification to be
Specification Substitute
used
1 - POLYSULPHIDES FOR SEALING IN AREAS OUTSIDE FUEL TANKS
SEALANTS
Interfay for High PQ10010-001-00 No longer available; Standard: MIL-S-8802 C1, B or C;
TN150289 A-F ASNA4159 EUROPE SAS - PR1422B 1 A-F
permanent joints issue PQ10010-001-01 Process Spec: IPDA77.01
BEZONS - 176949
SEALANTS
Interfay for High PQ10010-001-00 Standard: MIL-S-8802 C1, B or C; Process Spec:
TN150290 A-F ASNA4171 EUROPE SAS - PR1431 Type I 1 A-F
permanent joints issue PQ10010-001-02 IPDA77.01
BEZONS - 176949
3M FRANCE - EC1675 B/A
Interfay for TILLOY LEZ C1 or B Not PQ10010-001-00 No longer available; Standard: MIL-S-8802 C1, B or C;
TN150291 A-F ASNA4162 1 A-F
permanent joints CAMBRAI - assessed PQ10010-001-03 Process Spec: IPDA77.01
133379
GC408
Interfay for C1 or B Not PQ10010-001-00 No longer available; Standard: MIL-S-8802 C1, B or C;
TN150292 A-F 1 A-F
permanent joints assessed PQ10010-001-04 Process Spec: IPDA77.01
SEALANTS PQ10010-001-00
Interfay for AIMS04-05- High
TN150293 A-F ASNA4163 EUROPE SAS - PR1422BNA PQ10010-001-05 1 Process Spec: IPDA77.01 A-F
permanent joints 001 issue
BEZONS - 176949 ABS5419AH0B
Interfay for AIMS04-05- IPS04-05- High
TN150294 A-F EUROPE SAS - PR1422BNA PQ10010-001-05 1 Process Spec: IPDA77.01 A-F
permanent joints 001 001-02 issue
Interfay for AIMS04-05- Medium
TN150295 A-F ASNA4157 EUROPE SAS - PR1776B PQ10010-001-06 1 Hollospheres containing; Process Spec: IPDA77.01 A-F
permanent joints 001 issue
BEZONS - 176949 ABS5419AM7B
Interfay for AIMS04-05- IPS04-05- Medium
TN150296 A-F EUROPE SAS - PR1776B PQ10010-001-06 1 Hollospheres containing; Process Spec: IPDA77.01 A-F
PQ10010-001-00
SEALANTS
Interfay for AIMS04-05- IPS04-05- Medium PQ10010-001-07 No longer to be used - change of catalyst; Process Spec:
TN150297 A-F EUROPE SAS - PS892C 1 A-F
permanent joints 001 001-16 issue ABS5459AH7C IPDA77.01
BEZONS - 176949
ABS5419AH7C
PQ10010-001-00
SEALANTS
BEZONS - 176949
ABS5419AH7C
PQ10010-001-00
SEALANTS
BEZONS - 176949
ABS5419AH7C
CHEMETALL MC780C PQ10010-001-00
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Refer to Process specification for Primer use; Process
TN150300 A-F PQ10010-001-08 1 -
permanent joints 001 001-21 LANGELSHEIM - issue Spec: IPDA77.01
ABS5419AM0C
268576
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Refer to Process specification for Primer use; Process
TN150301 A-F PQ10010-001-08 1 -
permanent joints 014 014-03 LANGELSHEIM - issue Spec: IPDA77.01
ABS5419AM0C
268576
TN150302 A-F EUROPE SAS - PR1782C PQ10010-001-09 1 Process Spec: IPDA77.01 -
BEZONS - 176949 ABS5419AM0C
Issue AJ Page 50
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 50 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
Interfay for High PQ10010-020-00 Information transferred from REF.020; Standard: MIL-S-
TN150304 A-F ASNA4172 EUROPE SAS - PR1431G 1 A-F
permanent joints issue PQ10010-020-01 81733 Type II; Process Spec: IPDA77.01
BEZONS - 176949
SEALANTS
Interfay for High PQ10010-020-00 Information transferred from REF.020; Standard: MIL-S-
permanent joints issue PQ10010-020-01 81733 Type IV; Process Spec: IPDA77.01
BEZONS - 176949
SEALANTS PR1436G No longer available Information transferred from
Interfay for C1 or B Not PQ10010-020-00
TN150306 A-F ASNA4156 EUROPE SAS - 1 REF.020; Standard: MIL-S-81733 Type II; Process Spec: A-F
permanent joints assessed PQ10010-020-02
BEZONS - 176949 IPDA77.01
SEALANTS PR1436G No longer available Information transferred from

Interfay for C1 or B Not PQ10010-020-00
TN150307 A-F ASNA4156 EUROPE SAS - 1 REF.020; Standard: MIL-S-81733 Type IV; Process A-F
permanent joints assessed PQ10010-020-02
BEZONS - 176949 Spec: IPDA77.01
3M FRANCE - EC1675G No longer available Information transferred from
Interfay for TILLOY LEZ C1 or B Not PQ10010-020-00
TN150308 A-F ASNA4158 1 REF.020; Standard: MIL-S-81733 Type II; Process Spec: A-F
permanent joints CAMBRAI - assessed PQ10010-020-03
IPDA77.01
133379
3M FRANCE - EC1675G No longer available Information transferred from
Interfay for TILLOY LEZ C1 or B Not PQ10010-020-00
TN150309 A-F ASNA4158 1 REF.020; Standard: MIL-S-81733 Type IV; Process A-F
permanent joints CAMBRAI - assessed PQ10010-020-03
Spec: IPDA77.01
133379
SEALANTS
Interfay for High PQ10010-020-00 Information transferred from REF.020; Process Spec:
TN150310 A-F ASNB71132 ASNA4165 EUROPE SAS - PR1436GBNA 1 A-F
BEZONS - 176949
PQ10010-020-00
SEALANTS
Interfay for AIMS04-05- IPS04-05- Medium PQ10010-020-05 Information transferred from REF.020 Hollospheres
TN150311 A-F EUROPE SAS - PR1771B 1 A-F
permanent joints 001 001-17 issue ABS5419AL7B containing; Process Spec: IPDA77.01
BEZONS - 176949
ABS5419BL7B
PQ10010-020-00
SEALANTS
Interfay for AIMS04-05- IPS04-05- Medium PQ10010-020-05 Information transferred from REF.020 Hollospheres
permanent joints 004 004-02 issue ABS5419AL7B containing; Process Spec: IPDA77.01
BEZONS - 176949
ABS5419BL7B
Interfay for AIMS05-05- IPS04-05- Medium Information transferred from REF.020 - change of
TN150313 A-F EUROPE SAS - PS 892C PQ10010-020-06 1 A-F
permanent joints 002 002-09 issue catalyst; Process Spec: IPDA77.01
BEZONS - 176949 ABS5459AH7C
Interfay for AIMS04-05- IPS04-05- Medium Information transferred from REF.020 - change of
TN150314 A-F EUROPE SAS - PS 892C PQ10010-020-06 1 A-F
permanent joints 001 001-16 issue catalyst; Process Spec: IPDA77.01
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Information transferred from REF.020 - Refer to Process
TN150315 A-F PQ10010-020-07 1 -
permanent joints 001 001-21 LANGELSHEIM - issue specification for Primer use; Process Spec: IPDA77.01
ABS5419AM0C
268576
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Information transferred from REF.020 - Refer to Process
TN150316 A-F PQ10010-020-07 1 -
permanent joints 014 014-03 LANGELSHEIM - issue specification for Primer use; Process Spec: IPDA77.01
ABS5419AM0C
268576
Interfay for AIMS04-05- IPS04-05- Medium Information transferred from REF.020; Process Spec:
TN150317 A-F EUROPE SAS - PR1782C PQ10010-020-08 1 -
permanent joints 001 001-30 issue IPDA77.01
PPG
Interfay for High
TN150319 A-UK ABP 4-5145 ABP4-5142 AEROSPACE PR1422B - ABP4-5142 1 Chromate containing - No longer to be used A-UK
permanent joints issue
PRC DESOTO -
Issue AJ Page 51
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 51 van 114
AIRBUS
AIRBUS
A00710010
No
used
SHILDON -
219539
PPG PR1431G
AEROSPACE Type IV or Type I or
Interfay for High
TN150320 A-UK ABP4-5142 ABP4-5142 PRC DESOTO - Type II - ABP4-5142 1 Chromate containing - No longer to be used A-UK
SHILDON -
219539
PPG
PR1431
AEROSPACE
Interfay for Type I or Type II High
TN150321 A-UK PRC DESOTO - - ABP4-5142 1 Chromate containing - No longer to be used A-UK
SHILDON -
219539
PPG
AEROSPACE PR1431
Interfay for Type T or Type T6 High
SHILDON -
219539
PPG
AEROSPACE
Interfay for High
TN150323 A-UK PRC DESOTO - PR1422B NA - ABP4-5142 1 Chromate containing - No longer to be used A-UK
SHILDON -
219539
PPG
AEROSPACE
Interfay for High
TN150324 A-UK PRC DESOTO - PR1436GA - ABP4-5142 1 Chromate containing - No longer to be used A-UK
SHILDON -
219539
CHEMETALL MC780C
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium
TN150325 A-UK - ABP4-5142 1 Refer to Process specification for Primer use -
permanent joints 001 001-21 LANGELSHEIM - issue
268576
CHEMETALL MC780C
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium
268576
SEALANTS
Interfay for AIMS04-05- IPS04-05- Medium AIMS04-05-001
TN150327 A-UK EUROPE SAS - PR1782C ABP4-5142 1 - -
permanent joints 001 001-30 issue AIMS04-05-014
BEZONS - 176949
SEALANTS
TN150328 A-UK EUROPE SAS - PR1782C ABP4-5142 1 - -
BEZONS - 176949
PPG
AEROSPACE -
Interfay for AIMS04-05- IPS04-05- PRC-DESOTO Medium
TN150329 A-UK PR-2001B - ABP4-5142 1 - -
permanent joints 001 001-24 INTERNATIONAL Issue
- MOJAVE -
189173
PPG
AEROSPACE
Interfay for AIMS04-05- IPS04-05- Medium REACh targeted to be withrawn - use MC780-C or
TN150330 A-UK PRC DESOTO - PR1783 ABS5419AH6C ABP4-5142 1 -
permanent joints 001 001-26 issue PR1782-C to AIMS04-05-001
SHILDON -
219539
CHEMETALL
Interfay for AIMS04-05- IPS04-05- GMBH - Not ABS5419AH0C
TN150331 A-UK MC-238 B ABP4-5142 1 - -
permanent joints 001 001-04 LANGELSHEIM - Assessed PQ10010-050-00
268576
Issue AJ Page 52
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 52 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
Interfay for IPS04-05- High
TN150332 A-E MIL-S-8802 EUROPE SAS - PR1422B NA Z16107 I+D-P-146 1 - A-E
permanent joints 001-02 issue
BEZONS - 176949
SEALANTS
TN150333 A-E MIL-S-8802 EUROPE SAS - PR1422B NA Z16107 I+D-P-146 1 - A-E
BEZONS - 176949
PS870
SEALANTS C24 or C12
Interfay for Not
TN150334 A-E MIL-S-81733 EUROPE SAS - PR1431G Type 1 Z16101 I+D-P-146 1 - A-E
permanent joints assessed
BEZONS - 176949
SEALANTS PS892
Interfay for AIMS04-05- IPS04-05- C12 or C48 or C24 Medium
TN150335 A-E EUROPE SAS - Z16101 I+D-P-146 1 Change of catalyst A-E
BEZONS - 176949
SEALANTS
Interfay for AIMS04-05- IPS04-05- Medium Z16171 AIMS04-
TN150336 A-E EUROPE SAS - PR1782C I+D-P-146 1 - -
permanent joints 001 001-30 issue 05-014C
BEZONS - 176949
SEALANTS
BEZONS - 176949
CHEMETALL MC780C
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Z16171 AIMS04-
TN150338 A-E I+D-P-146 1 Refer to Process specification for Primer use -
permanent joints 001 001-21 LANGELSHEIM - issue 05-014C
268576
CHEMETALL MC780C
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Z16171 AIMS04-
268576
SEALANTS
Interfay for AIMS04-05- IPS04-05- High DAN1218 Polythioether sealant, No longer to be used - Chromate
TN150340 A-D EUROPE SAS - PR1827GR 1/3 80-T-34-9600 1 A-D
permanent joints 013 013-01 issue AIMS04-05-013 containing
BEZONS - 176949
SEALANTS
Interfay for High DAN1218 Polythioether sealant, No longer to be used - Chromate
TN150341 A-D EUROPE SAS - PR1827GR 1/3 80-T-34-9600 1 A-D
permanent joints issue AIMS04-05-013 containing; Standard: DAN1218-04
BEZONS - 176949
Interfay for
permanent joints
of small parts
used during
SEALANTS Polythioether sealant. Only to be used
manufacturing AIMS04-05- IPS04-05- Medium
TN150342 A-D EUROPE SAS - PR1827R 1/3LO AIMS04-05-013 80-T-34-9600 1 outside fuel tank and shall not be applied in areas where -
like e.g. Clips 013 013-02 issue
BEZONS - 176949 fuel contamination can be expected.
(before installing
fasteners/rivets) -
not for general
use
SEALANTS
Interfay for Medium
TN150343 A-D - - EUROPE SAS - PR1827R 1/6 DAN1184 80-T-34-9600 1 Polythioether sealant; Standard: DAN1184-06 -
BEZONS - 176949
SEALANTS PR143G
Interfay for M or IV or II or I Not Withdrawn because product contains chromates;
TN150344 A-D EUROPE SAS - WL5-5963 80-T-34-9600 1 A-D
permanent joints assessed Standard: WL5-5963
BEZONS - 176949
SEALANTS
Interfay for Not Withdrawn because product contains chromates;
TN150345 A-D EUROPE SAS - PR1445GR DAN1218 80-T-34-9600 1 A-D
permanent joints assessed Standard: DAN1218-01
BEZONS - 176949
Issue AJ Page 53
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 53 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
Interfay for Not
TN150346 A-D EUROPE SAS - PR1445GR DAN1218 80-T-34-9600 1 Standard: DAN1218-02 A-D
permanent joints assessed
BEZONS - 176949
PS892
SEALANTS C70 or C48 or C2 or C3
Interfay for AIMS04-05- IPS04-05- Medium DAN1184
TN150347 A-D EUROPE SAS - or C12 80-T-34-9600 1 No longer to be used - change of catalyst A-D
BEZONS - 176949
PS892
SEALANTS C70 or C48 or C2 or C3
Interfay for Medium DAN1184 No longer to be used - change of catalyst; Standard:
TN150348 A-D EUROPE SAS - or C12 80-T-34-9600 1 A-D
permanent joints issue AIMS04-05-001 AIMDAN1184
BEZONS - 176949
CHEMETALL MC630C The product shall not be used on titanium and steel
Interfay for GMBH - Primer:MC110 Medium DAN1184AIMS04- without adhesion promoter MC110REACh
TN150349 A-D DAN1184 - 80-T-34-9600 1 -
permanent joints LANGELSHEIM - issue 05-001 targeted to be withrawn - use MC780 C or PR1782 C to
268576 AIMS04-05-001
CHEMETALL MC630C The product shall not be used on titanium and steel
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC110 Medium DAN1184AIMS04- without adhesion promoter MC110REACh
TN150350 A-D 80-T-34-9600 1 -
permanent joints 001 001-12 LANGELSHEIM - issue 05-001 targeted to be withrawn - use MC780 C or PR1782 C to
268576 AIMS04-05-001
CHEMETALL MC780C
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium AIMS04-05-001
TN150351 A-D 80-T-34-9600 1 Refer to Process specification for Primer use -
permanent joints 001 001-21 LANGELSHEIM - issue AIMS04-05-014C
268576
CHEMETALL MC780C
Interfay for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium AIMS04-05-001
TN150352 A-D 80-T-34-9600 1 Refer to Process specification for Primer use -
268576
SEALANTS
TN150353 A-D EUROPE SAS - PR1782C 80-T-34-9600 1 - -
BEZONS - 176949
SEALANTS
BEZONS - 176949
SEALANTS
Interfay for High Withdrawn because the product contains chromate;
TN150355 A-D EUROPE SAS - PR1436G SPRAY MIL-S81733TYP3 80-T-34-9600 1 A-D
permanent joints issue Standard: MIL-S-81733 Type III
BEZONS - 176949
SEALANTS
Interfay for High Standard: MIL-S-8802 C1, B or C; IPS: TH5.940/1;
TN150356 F EUROPE SAS - PR1422B PQ10010-001-00 1 -
permanent joints issue Process Spec: TH6.6548
BEZONS - 176949
SEALANTS
Interfay for High Standard: MIL-S-8802 C1, B or C; IPS: TH5.940/3;
TN150357 F EUROPE SAS - PR1431 Type I PQ10010-001-00 1 -
permanent joints issue Process Spec: TH6.6548
BEZONS - 176949
SEALANTS PR1431G
Interfay for Type I or Type II High Chromate containing - No longer to be used; IPS:
TN150358 F MIL-S-81733 EUROPE SAS - PQ10010-001-00 1 -
permanent joints issue TH5.951/4; Process Spec: TH6.6548
BEZONS - 176949
PR1422
SEALANTS B
TN150359 SON EUROPE SAS - B NA - 1 Standard: MIL-S-8802 C1, B; Process Spec: PS6.5208 SON
BEZONS - 176949
SEALANTS
Interfay for IPS04-05- PR1422 High
TN150360 SON EUROPE SAS - - 1 Standard: MIL-S-8802 C1, B; Process Spec: PS6.5208 SON
permanent joints 002-04 B issue
BEZONS - 176949
Issue AJ Page 54
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 54 van 114
AIRBUS
AIRBUS
A00710010
No
used
B NA
SEALANTS
Interfay for High Standard: MIL-S-81733 Type II, IV; Process Spec:
TN150361 SON EUROPE SAS - PR1431G Type I - 1 SON
permanent joints issue PS6.5204
BEZONS - 176949
PR1436
SEALANTS GB
Interfay for High Standard: MIL-S-81733 Type II, IV; Process Spec:
TN150362 SON EUROPE SAS - GB NA - 1 SON
permanent joints issue PS6.5204
BEZONS - 176949
SEALANTS
Interfay for Medium
TN150363 SON EUROPE SAS - PR1828 B - 1 Process Spec: PS6.5218;Standard: SAE-AMS-3277 -
BEZONS - 176949
PPG
AEROSPACE -
ABS5419AM0C
TN150364 A-F PR1782C PQ10010-001-00 1 Process Spec: IPDA77.01 -
permanent joints 001 001-30 INTERNATIONAL issue
PQ10010-001-09
- MOJAVE -
189173
PPG
AEROSPACE -
ABS5419AM0C
PQ10010-001-09
- MOJAVE -
189173
PPG
AEROSPACE -
ABS5419AM0C
PQ10010-001-09
- MOJAVE -
189173
PPG
AEROSPACE ABS5419AM0C
TN150367 A-F PRC DESOTO - PR1782C PQ10010-020-00 1 -
SHILDON - PQ10010-020-08
219539
PPG
SHILDON - PQ10010-020-08
219539
PPG
SHILDON - PQ10010-020-08
219539
PPG
AEROSPACE -
Interfay for AIMS04-05- IPS04-05- PRC-DESOTO Medium AIMS04-05-001
TN150370 A-UK PR1782C ABP4-5142 1 - -
permanent joints 001 001-30 INTERNATIONAL issue AIMS04-05-014
- MOJAVE -
189173
PPG
TN150371 A-UK AEROSPACE - PR1782C ABP4-5142 1 - -
PRC-DESOTO
Issue AJ Page 55
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 55 van 114
AIRBUS
AIRBUS
A00710010
No
used
INTERNATIONAL
- MOJAVE -
189173
PPG
AEROSPACE
TN150372 A-UK PRC DESOTO - PR1770C - ABP4-5142 1 No longer to be used - change of catalyst A-UK
SHILDON -
219539
Interfay for AIMS04-05- IPS04-05- Medium AIMS04-05-014C
TN150373 A-E _to_be_defined PR1782C I+D-P-146 1 - -
permanent joints 001 001-30 issue Z16171
TN150375 A-D _to_be_defined PR1782C AIMS04-05-001 80-T-34-9600 1 - -
TN150376 A-D _to_be_defined PR1782C AIMS04-05-001 80-T-34-9600 1 - -
PPG
AEROSPACE -
Interfay for AIMS04-05- IPS04-05- PRC-DESOTO Medium PQ10010-001-00
TN150377 A-F PR-2001B 1 Process Spec: IPDA77.01 -
permanent joints 001 001-24 INTERNATIONAL Issue PQ10010-001-10
- MOJAVE -
189173
PPG
AEROSPACE -
- MOJAVE -
189173
SEALANTS
Interfay for low High PQ10010-002-00
TN150379 A-F EUROPE SAS - PR1321B 2 Standard: MIL-S-8784 CB A-F
adhesion joints issue PQ10010-002-01
BEZONS - 176949
SEALANTS
Interfay for low High PQ10010-002-00 No longer available; Standard: MIL-S-8784 Classe B;
TN150380 A-F EUROPE SAS - PR1403GB 2 A-F
adhesion joints issue PQ10010-002-02 Process Spec: IPDA77.01
BEZONS - 176949
Interfay for low AIMS04-05- IPS04-05- Medium
TN150381 A-F EUROPE SAS - PR1773B PQ10010-002-03 2 Process Spec: IPDA77.01 -
adhesion joints 006 006-02 issue
Interfay for low Medium
TN150382 A-F ASNA4168 EUROPE SAS - PR1773B PQ10010-002-03 2 Process Spec: IPDA77.01 -
adhesion joints issue
SEALANTS No longer available Information transferred from
TN150383 A-F EUROPE SAS - PR1403GB 2 REF.023; Standard: MIL-S-8784 CB; Process Spec: A-F
Interfay for low AIMS04-05- IPS04-05- Medium Information transferred from REF.023; Process Spec:
TN150384 A-F EUROPE SAS - PR1773B PQ10010-023-02 2
adhesion joints 006 006-02 issue IPDA77.01
Interfay for low Medium Information transferred from REF.023; Process Spec:
TN150385 A-F ASNA4168 EUROPE SAS - PR1773B PQ10010-023-02 2
adhesion joints issue IPDA77.01
PPG
AEROSPACE
TN150386 A-UK PRC DESOTO - PR1301 - ABP4-5142 2 No longer to be used A-UK
SHILDON -
219539
Issue AJ Page 56
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 56 van 114
AIRBUS
AIRBUS
A00710010
No
used
PPG
AEROSPACE
TN150387 A-UK PRC DESOTO - PR1301 - ABP4-5142 2 Chromate containing - No longer to be used A-UK
SHILDON -
219539
PPG
AEROSPACE
Interfay for low Not
TN150388 A-UK PRC DESOTO - PR1403GA NA - ABP4-5142 2 Chromate containing - No longer to be used A-UK
adhesion joints assessed
SHILDON -
219539
PPG
AEROSPACE
TN150389 A-UK PRC DESOTO - PR1428B - ABP4-5142 2 Change of catalyst A-UK
SHILDON -
219539
SEALANTS
TN150390 A-UK EUROPE SAS - PR1773B - ABP4-5142 2 - -
BEZONS - 176949
CHEMETALL
Interfay for low AIMS04-05- IPS04-05- GMBH - Medium
TN150391 A-UK MC-216 B - ABP4-5142 2 - -
adhesion joints 006 006-04 LANGELSHEIM - issue
268576
SEALANTS
TN150392 A-E MIL-S-8784 EUROPE SAS - PR1428B2 Z16110 I+D-P-146 2 - A-E
BEZONS - 176949
SEALANTS
TN150393 A-E EUROPE SAS - PR1773A2 Z16160 I+D-P-146 2 - -
BEZONS - 176949
CHEMETALL
TN150394 A-E MC-216 A Z16160 I+D-P-146 2 - -
268576
SEALANTS
TN150395 A-E EUROPE SAS - PR1773B2 Z16161 I+D-P-146 2 - -
BEZONS - 176949
CHEMETALL
TN150396 A-E MC-216 B Z16161 I+D-P-146 2 - -
268576
SEALANTS
Interfay for low High
TN150397 A-D DAN1270 EUROPE SAS - PR1403GB DAN1270 80-T-34-9600 2 Withdrawn because product contains chromates A-D
BEZONS - 176949
SEALANTS
TN150398 A-D DAN1269 EUROPE SAS - PR1403GA DAN1269 80-T-34-9600 2 Withdrawn because product contains chromates A-D
BEZONS - 176949
CHEMETALL
Interfay for low GMBH - Medium AIMS04-05-006
TN150399 A-D DAN1270 MC-216 B 80-T-34-9600 2 - -
adhesion joints LANGELSHEIM - issue DAN1270
268576
CHEMETALL
Interfay for low AIMS04-05- GMBH - Medium AIMS04-05-006
TN150400 A-D MC-216 B 80-T-34-9600 2 IPS: IPS04-04-006-04 -
adhesion joints 006 LANGELSHEIM - issue DAN1270
268576
Interfay for low CHEMETALL Medium DAN1270
TN150401 A-D DAN1269 MC-216 A 80-T-34-9600 2 - -
adhesion joints GMBH - issue AIMS04-05-006
Issue AJ Page 57
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 57 van 114
AIRBUS
AIRBUS
A00710010
No
used
LANGELSHEIM -
268576
CHEMETALL
Interfay for low AIMS04-05- IPS04-05- GMBH - Medium DAN1270
TN150402 A-D MC-216 A 80-T-34-9600 2 - -
adhesion joints 006 006-03 LANGELSHEIM - issue AIMS04-05-006
268576
SEALANTS
TN150403 A-D EUROPE SAS - PR1773A AIMS04-05-006 80-T-34-9600 2 - -
BEZONS - 176949
SEALANTS
TN150404 A-D EUROPE SAS - PR1773B AIMS04-05-006 80-T-34-9600 2 - -
BEZONS - 176949
SEALANTS
Interfay for low High PQ10010-002-00 lead containing; Standard: MIL-S-8784 C1, B; IPS:
TN150405 F EUROPE SAS - PR1321B 2 -
adhesion joints issue MIL-S8784CL-B TH5.947/1; Process Spec: TH6.6548
BEZONS - 176949
SEALANTS
Interfay for low High lead containing; Standard: MIL-S-8784 C1, B; Process
TN150406 SON EUROPE SAS - PR1321B MIL-S8784CL-B 2 -
adhesion joints issue Spec: PS6.5206
BEZONS - 176949
CHEMETALL
Interfay for low AIMS04-05- IPS04-05- GMBH - Not PQ10010-002-00
TN150407 A-F MC-216 B 2 Process Spec: IPDA77.01 -
adhesion joints 006 006-04 LANGELSHEIM - assessed PQ10010-002-04
268576
SEALANTS
Fillets and filling High PQ10010-003-00 No longer available; Standard: MIL-S-8802 C1, B;
of cavities issue PQ10010-003-01 Process Spec: IPDA77.01
BEZONS - 176949
GC408
Fillets and filling B or C1 Not PQ10010-003-00
TN150409 A-F 3 No longer available; Standard: MIL-S-8802 C1, B A-F
of cavities assessed PQ10010-003-02
Fillets and filling High
TN150410 A-F ASNB71152 ASNA4163 EUROPE SAS - PR1422BNA PQ10010-003-03 3 Process Spec: IPDA77.01 A-F
of cavities issue
Fillets and filling AIMS04-05- IPS04-05- High
of cavities 001 001-02 issue
Fillets and filling AIMS04-05- IPS04-05- Medium
TN150412 A-F EUROPE SAS - PR1776B PQ10010-003-04 3 Change of catalyst; Process Spec: IPDA77.01 A-F
Fillets and filling Medium
TN150413 A-F ASNB71070 ASNA4157 EUROPE SAS - PR1776B PQ10010-003-04 3 Change of catalyst; Process Spec: IPDA77.01 A-F
of cavities issue
CHEMETALL MC780B PQ10010-003-00
Fillets and filling AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Refer to Process specification for Primer use; Process
TN150414 A-F PQ10010-003-05 3 -
of cavities 001 001-25 LANGELSHEIM - issue Spec: IPDA77.01
ABS5419AM6B
268576
Fillets and filling AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Refer to Process specification for Primer use; Process
TN150415 A-F PQ10010-003-05 3 -
of cavities 014 014-02 LANGELSHEIM - issue Spec: IPDA77.01
ABS5419AM6B
268576
BEZONS - 176949 ABS5419AL6B
Issue AJ Page 58
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 58 van 114
AIRBUS
AIRBUS
A00710010
No
used
PR1436G
SEALANTS No longer availableInformation transferred from
Fillets and filling C1 or B Not PQ10010-021-00
TN150418 A-F ASNA4156 EUROPE SAS - 3 REF.021; Standard: MIL-S-81733 Type II; Process Spec: A-F
of cavities assessed PQ10010-021-01
3M FRANCE - EC1675G No longer availableNo longer available Information
Fillets and filling TILLOY LEZ B or C1 Not PQ10010-021-00
TN150419 A-F ASNA4158 3 transferred from REF.021; Standard: MIL-S-81733 Type A-F
of cavities CAMBRAI - assessed PQ10010-021-02
II; Process Spec: IPDA77.01
133379
SEALANTS
Fillets and filling High PQ10010-021-00 Information transferred from REF.021; Process Spec:
TN150420 A-F ASNB71132 ASNA4165 EUROPE SAS - PR1436GBNA 3 A-F
of cavities issue PQ10010-021-03 IPDA77.01
BEZONS - 176949
PQ10010-021-00
SEALANTS
Fillets and filling AIMS04-05- IPS04-05- Medium PQ10010-021-04 Information transferred from REF.021 - Change of
of cavities 001 001-17 issue ABS5419AL7B catalyst; Process Spec: IPDA77.01
BEZONS - 176949
ABS5419BL7B
PQ10010-021-00
SEALANTS
Fillets and filling AIMS04-05- IPS04-05- Medium PQ10010-021-04 Information transferred from REF.021 - Change of
of cavities 004 004-02 issue ABS5419AL7B catalyst; Process Spec: IPDA77.01
BEZONS - 176949
ABS5419BL7B
Fillets and filling AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Information transferred from REF.021 - Refer to Process
TN150423 A-F PQ10010-021-05 3 -
of cavities 001 001-25 LANGELSHEIM - issue specification for Primer use; Process Spec: IPDA77.01
ABS5419AL6B
268576
Fillets and filling AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Information transferred from REF.021 - Refer to Process
TN150424 A-F PQ10010-021-05 3 -
of cavities 014 014-02 LANGELSHEIM - issue specification for Primer use; Process Spec: IPDA77.01
ABS5419AL6B
268576
Fillets and filling AIMS04-05- IPS04-05- Medium Information transferred from REF.021; Process Spec:
TN150425 A-F EUROPE SAS - PR1782B PQ10010-021-06 3 -
of cavities 001 001-27 issue IPDA77.01
PPG
AEROSPACE
Fillets and filling High
TN150427 A-UK PRC DESOTO - PR1422BNA - ABP4-5142 3 Chromate containing - No longer to be used A-UK
of cavities issue
SHILDON -
219539
PPG
AEROSPACE
Fillets and filling Not
TN150428 A-UK PRC DESOTO - PR1422GB - 3 No longer available; Standard: MIL-S-81733 Type II A-UK
of cavities assessed
SHILDON -
219539
CHEMETALL
Fillets and filling AIMS04-05- IPS04-05- GMBH - Low
TN150429 A-UK MC-238 B - ABP4-5142 3 - -
of cavities 001 001-04 LANGELSHEIM - issue
268576
CHEMETALL
Fillets and filling AIMS04-05- IPS04-05- GMBH - Low
TN150430 A-UK MC-238 B - ABP4-5142 3 - -
268576
PPG
AEROSPACE
TN150431 A-UK PRC DESOTO - PS860B - ABP4-5142 3 Disqualified A-UK
of cavities issue
SHILDON -
219539
Issue AJ Page 59
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 59 van 114
AIRBUS
AIRBUS
A00710010
No
used
PPG
AEROSPACE
TN150432 A-UK PRC DESOTO - PR1828 B - ABP4-5142 3 Disqualified A-UK
SHILDON -
219539
PPG
AEROSPACE
Fillets and filling AIMS04-05- Medium
TN150433 A-UK PRC DESOTO - PR1779B - ABP4-5142 3 Disqualified A-UK
of cavities 001 issue
SHILDON -
219539
PPG
AEROSPACE -
Fillets and filling AIMS04-05- IPS04-05- PRC-DESOTO Medium
TN150434 A-UK PR-2001B - ABP4-5142 3 - -
of cavities 001 001-24 INTERNATIONAL Issue
- MOJAVE -
189173
PPG
AEROSPACE
Fillets and filling AIMS04-05- IPS04-05- Medium AIMS04-05-001
TN150435 A-UK PRC DESOTO - PR1782B ABP4-5142 3 - -
of cavities 001 001-27 issue AIMS04-05-014
SHILDON -
219539
PPG
AEROSPACE
TN150436 A-UK PRC DESOTO - PR1782B ABP4-5142 3 - -
SHILDON -
219539
CHEMETALL MC780B
Fillets and filling AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium
268576
CHEMETALL MC780B
268576
SEALANTS
TN150439 A-E EUROPE SAS - PR1422B NA Z16107 3 - A-E
BEZONS - 176949
SEALANTS
TN150440 A-E EUROPE SAS - PR1422B NA Z16107 3 - A-E
BEZONS - 176949
SEALANTS
TN150441 A-E EUROPE SAS - PR1776B Z16157 I+D-P-146 3 Change of catalyst A-E
BEZONS - 176949
SEALANTS
TN150442 A-E EUROPE SAS - PS870B2 Z16113 I+D-P-146 3 Standard: MIL-S-81733 Type II A-E
of cavities issue
BEZONS - 176949
SEALANTS
Fillets and filling High Chromate containing - No longer to be used; Standard:
TN150443 A-E EUROPE SAS - PR1436GB Z16113 I+D-P-146 3 A-E
of cavities issue MIL-S-81733 Type II
BEZONS - 176949
SEALANTS
Fillets and filling AIMS04-05- IPS04-05- Medium Z16177 AIMS04-
TN150444 A-E EUROPE SAS - PR1782B I+D-P-146 3 - -
of cavities 001 001-27 issue 05-014B
BEZONS - 176949
SEALANTS
Fillets and filling AIMS04-05- IPS04-05- Medium Z16177 AIMS04-
of cavities 014 014-05 issue 05-014B
BEZONS - 176949
Issue AJ Page 60
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 60 van 114
AIRBUS
AIRBUS
A00710010
No
used
CHEMETALL MC780B
Fillets and filling AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Z16177 AIMS04-
of cavities 001 001-25 LANGELSHEIM - issue 05-014B
268576
CHEMETALL MC780B
Fillets and filling AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Z16177 AIMS04-
of cavities 014 014-02 LANGELSHEIM - issue 05-014B
268576
SEALANTS
Fillets and filling High Withdrawn because product contains chromates;
TN150448 A-D EUROPE SAS - PR1436GB - 80-T-34-9600 3 A-D
of cavities issue Standard: WL5-5962
BEZONS - 176949
SEALANTS
TN150449 A-D EUROPE SAS - PR1445GB1 - 80-T-34-9600 3 Withdrawn because product contains chromates A-D
BEZONS - 176949
SEALANTS
Fillets and filling IPS04-05- High
TN150450 A-D DAN1186 EUROPE SAS - PR1436B DAN1186 80-T-34-9600 3 Withdrawn because the product contains chromates A-D
of cavities 001-07 issue
BEZONS - 176949
SEALANTS
Fillets and filling IPS04-05- High
TN150451 A-D DAN1186 EUROPE SAS - PR1445B DAN1186 80-T-34-9600 3 Withdrawn, because no longer produced A-D
BEZONS - 176949
CHEMETALL
Standard: AIMS04-05-001LREACh
Fillets and filling IPS04-05- GMBH - Low
TN150452 A-D - MC-770B1 AIMS04-05-001L 80-T-34-9600 3 targeted to be withrawn - use MC780-B or PR1782-B to -
of cavities 001-15 LANGELSHEIM - issue
AIMS04-05-001
268576
CHEMETALL
Fillets and filling IPS04-05- GMBH - Medium
TN150453 A-D - MC-770B2 AIMS04-05-001L 80-T-34-9600 3 targeted to be withrawn - use MC780-B or PR1782-B to -
AIMS04-05-001
268576
CHEMETALL
Fillets and filling IPS04-05- GMBH - Medium
TN150454 A-D - MC-770B2 grey AIMS04-05-001L 80-T-34-9600 3 targeted to be withrawn - use MC780-B or PR1782-B to -
AIMS04-05-001
268576
CHEMETALL
Fillets and filling IPS04-05- GMBH - Medium REACh targeted to be withrawn - use MC780 B or
TN150455 A-D DAN1186 MC650B DAN1186 80-T-34-9600 3 -
of cavities 001-09 LANGELSHEIM - issue PR1782 B to AIMS04-05-001
268576
SEALANTS
BEZONS - 176949
SEALANTS
BEZONS - 176949
CHEMETALL MC780B
TN150458 A-D AIMS04-05-001 80-T-34-9600 3 Refer to Process specification for Primer use -
268576
CHEMETALL MC780B
TN150459 A-D AIMS04-05-001 80-T-34-9600 3 Refer to Process specification for Primer use -
268576
SEALANTS
Fillets and filling AIMS04-05- IPS04-05- Medium No longer used - Hollospheres containing - Change of
TN150460 A-D EUROPE SAS - PR1776B AIMS04-05-001 80-T-34-9600 3 A-D
of cavities 001 001-06 issue catalyst
BEZONS - 176949
Issue AJ Page 61
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 61 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
Fillets and filling High DAN1184 WL5-
TN150461 A-D EUROPE SAS - JFM1675GB 80-T-34-9600 3 Withdrawn; Standard: WL5-5962 A-D
of cavities issue 5962
BEZONS - 176949
SEALANTS
Fillets and filling High Standard: MIL-S-8802 C1, B; IPS: TH5.940/1; Process
TN150462 F EUROPE SAS - PR1422B PQ10010-003-00 3 -
of cavities issue Spec: TH6.6548
BEZONS - 176949
SEALANTS
Fillets and filling High chromated; Standard: MIL-S-81733 Type II; IPS:
TN150463 F EUROPE SAS - PR1436GB PQ10010-003-00 3 -
of cavities issue TH5.951/2; Process Spec: TH6.6548
BEZONS - 176949
SEALANTS PR1422B
Fillets and filling IPS04-05- PR1422B NA High
TN150464 SON EUROPE SAS - - 3 Standard: MIL-S-8802 C1, B; Process Spec: PS6.5208 -
BEZONS - 176949
SEALANTS PR1422B
Fillets and filling IPS04-05- PR1422B NA High
TN150465 SON EUROPE SAS - - 3 Standard: MIL-S-8802 C1, B; Process Spec: PS6.5208 -
BEZONS - 176949
SEALANTS PR1436GB
Fillets and filling PR1436GB NA High chromated; Standard: MIL-S-81733 Type II; Process
TN150466 SON EUROPE SAS - - 3 -
of cavities issue Spec: PS6.5205
BEZONS - 176949
SEALANTS
of cavities issue
BEZONS - 176949
SEALANTS ABS5419AL6B
BEZONS - 176949 PQ10010-003-00
BEZONS - 176949 PQ10010-003-00
BEZONS - 176949 PQ10010-021-00
BEZONS - 176949 PQ10010-021-00
SEALANTS
TN150472 A-UK EUROPE SAS - PR1782B ABP4-5142 3 - -
BEZONS - 176949
SEALANTS
TN150473 A-UK EUROPE SAS - PR1782B ABP4-5142 3 - -
BEZONS - 176949
SEALANTS
Fillets and filling AIMS04-05- IPS04-05- Medium AIMS04-05-014B
of cavities 001 001-27 issue Z16177
BEZONS - 176949
SEALANTS
Fillets and filling AIMS04-05- IPS04-05- Medium AIMS04-05-014B
of cavities 014 014-05 issue Z16177
BEZONS - 176949
SEALANTS
TN150476 A-D EUROPE SAS - PR1782B 80-T-34-9600 3 - -
of cavities 001 001-27 issue AIMS04-05-014B
BEZONS - 176949
SEALANTS
TN150477 A-D EUROPE SAS - PR1782B 80-T-34-9600 3 - -
of cavities 014 014-05 issue AIMS04-05-014B
BEZONS - 176949
Fillets and filling AIMS04-05- IPS04-05- PPG Not AIMS04-05-001
TN150478 A-UK PR1782B ABP4-5142 3 - -
of cavities 001 001-27 AEROSPACE - assessed AIMS04-05-014
Issue AJ Page 62
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 62 van 114
AIRBUS
AIRISUS
A00710010
No
used
PRC-DESOTO
INTERNATIONAL
- MOJAVE -
189173
PPG
AEROSPACE -
Fillets and filling AIMS04-05- IPS04-05- PRC-DESOTO Not AIMS04-05-001
TN150479 A-UK PR1782B ABP4-5142 3 - -
of cavities 014 014-05 INTERNATIONAL assessed AIMS04-05-014
- MOJAVE -
189173
PPG
AEROSPACE -
Fillets and filling AIMS04-05- IPS04-05- PRC-DESOTO Medium PQ10010-003-00
of cavities 001 001-24 INTERNATIONAL Issue PQ10010-003-07
- MOJAVE -
189173
PPG
AEROSPACE -
Fillets and filling AIMS04-05- IPS04-05- PRC-DESOTO Medium PQ10010-021-00
of cavities 001 001-24 INTERNATIONAL Issue PQ10010-021-07
- MOJAVE -
189173
PPG PR1422B
Polysulphide
AEROSPACE BJ 00930 B
filled with High
TN150482 A-UK PRC DESOTO - K RESINS - ABP4-5142 4 Deleted from process specification A-UK
microballoons for issue
SHILDON -
filling cavities
219539
PPG PR1422A NA
Polysulphide
AEROSPACE BJ 00930 B
filled with High
TN150483 A-UK PRC DESOTO - K RESINS - ABP4-5142 4 Deleted from process specification A-UK
microballoons for issue
SHILDON -
filling cavities
219539
Overcoating of SEALANTS
High PQ10010-005-00 No longer available; Standard: MIL-S-8802 C1, A;
TN150484 A-F fillets and ASNA4159 EUROPE SAS - PR1422A 5 A-UK
issue PQ10010-005-01 Process Spec: IPDA77.01
fastener lines BEZONS - 176949
Overcoating of
Not PQ10010-005-00
TN150485 A-F fillets and GC 408 C1,A 5 No longer available A-F
assessed PQ10010-005-02
fastener lines
Overcoating of SEALANTS PQ10010-005-00
AIMS04-05- IPS04-05- High
TN150486 A-F fillets and EUROPE SAS - PR1422ANA PQ10010-005-03 5 - A-F
001 001-01 issue
fastener lines BEZONS - 176949 ABS5419AH0A
High
TN150487 A-F fillets and ASNB71152 ASNA4163 EUROPE SAS - PR1422ANA PQ10010-005-03 5 - A-F
issue
fastener lines BEZONS - 176949 ABS5419AH0A
AIMS04-05- IPS04-05- High Hollospheres containing - Change of catalyst; Process
TN150488 A-F fillets and EUROPE SAS - PR1776 A AS PQ10010-005-04 5 A-F
001 001-05 issue Spec: IPDA77.01
fastener lines BEZONS - 176949 ABS5419AM7A
High Hollospheres containing - Change of catalyst; Process
TN150489 A-F fillets and ASNB71070 ASNA4157 EUROPE SAS - PR1776 A AS PQ10010-005-04 5 A-F
issue Spec: IPDA77.01
CHEMETALL MC780A
Overcoating of PQ10010-005-00
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Refer to Process specification for Primer use; Process
TN150490 A-F fillets and PQ10010-005-05 5 -
001 001-20 LANGELSHEIM - issue Spec: IPDA77.01
fastener lines ABS5419AM6A
268576
Issue AJ Page 63
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 63 van 114
AIRBUS
AIRBUS
A00710010
No
used
CHEMETALL MC780A
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Refer to Process specification for Primer use; Process
014 014-01 LANGELSHEIM - issue Spec: IPDA77.01
fastener lines ABS5419AM6A
268576
PR1782A
Overcoating of SEALANTS primer:PR148AF or ABS5419AL6A
AIMS04-05- IPS04-05- Medium
TN150492 A-F fillets and EUROPE SAS - primer:PR 184 PQ10010-005-00 5 Process Spec: IPDA77.01 -
001 001-29 issue
fastener lines BEZONS - 176949 PQ10010-005-06
PR1782A
014 014-04 issue
PR1436G
Overcoating of SEALANTS No longer available Information transferred from
A or C1 High PQ10010-022-00
TN150494 A-F fillets and ASNA4156 EUROPE SAS - 5 REF.022; Standard: MIL-S-81733 Type I, III; Process A-F
issue PQ10010-022-01
fastener lines BEZONS - 176949 Spec: IPDA77.01
High PQ10010-022-00 Information transferred from REF.022; Standard: MIL-S-
TN150495 A-F fillets and ASNA4156 EUROPE SAS - PR1436G SPRAY 5 A-F
issue PQ10010-022-02 81733 Type I, III; Process Spec: IPDA77.01
3M FRANCE - EC1675 B/A G
Overcoating of No longer available Information transferred from
TILLOY LEZ C1 or A Not PQ10010-022-00
TN150496 A-F fillets and ASNA4158 5 REF.022; Standard: MIL-S-81733 Type I, III; Process A-F
CAMBRAI - assessed PQ10010-022-03
fastener lines Spec: IPDA77.01
133379
High PQ10010-022-00 Information transferred from REF.022; Process Spec:
TN150497 A-F fillets and ASNB71131 ASNA4165 EUROPE SAS - PR1436GA NA 5 A-F
issue PQ10010-022-04 IPDA77.01
AIMS04-05- IPS04-05- High Hollospheres containing - Change of catalyst; Process
TN150498 A-F fillets and EUROPE SAS - PR1776AAS PQ10010-022-05 5 A-F
001 001-05 issue Spec: IPDA77.01
High Hollospheres containing - Change of catalyst; Process
TN150499 A-F fillets and ASNB71070 ASNA4157 EUROPE SAS - PR1776AAS PQ10010-022-05 5 A-F
issue Spec: IPDA77.01
CHEMETALL MC780A
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Information transferred from REF.022 - Refer to Process
001 001-20 LANGELSHEIM - issue specification for Primer use; Process Spec: IPDA77.01
fastener lines ABS5419AL6A
268576
CHEMETALL MC780A
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Information transferred from REF.022 - Refer to Process
014 014-01 LANGELSHEIM - issue specification for Primer use; Process Spec: IPDA77.01
fastener lines ABS5419AL6A
268576
PR1782A
Overcoating of SEALANTS primer:PR148AF or PQ10010-022-00
AIMS04-05- IPS04-05- Medium Information transferred from REF.022; Process Spec:
TN150502 A-F fillets and EUROPE SAS - primer:PR 184 PQ10010-022-07 5 -
001 001-29 issue IPDA77.01
fastener lines BEZONS - 176949 ABS5419AL6A
PR1782A
Overcoating of SEALANTS primer:PR148AF or PQ10010-022-00
AIMS04-05- IPS04-05- Medium Information transferred from REF.022; Process Spec:
TN150503 A-F fillets and EUROPE SAS - primer:PR 184 PQ10010-022-07 5 -
014 014-04 issue IPDA77.01
fastener lines BEZONS - 176949 ABS5419AL6A
Overcoating of PPG
High
TN150504 A-UK fillets and AEROSPACE PR1422A - ABP4-5142 5 Chromate containing - No longer to be used A-UK
issue
fastener lines PRC DESOTO -
Issue AJ Page 64
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 64 van 114
AIRBUS
AIRBUS
A00710010
No
used
SHILDON -
219539
PPG
Overcoating of AEROSPACE
High
TN150505 A-UK fillets and PRC DESOTO - PR7422 - ABP4-5142 5 Chromate containing - No longer to be used A-UK
issue
fastener lines SHILDON -
219539
PPG
High
TN150506 A-UK fillets and PRC DESOTO - PR1422ANA - ABP4-5142 5 Chromate containing - No longer to be used A-UK
issue
219539
PPG
High
TN150507 A-UK fillets and PRC DESOTO - PR7422NA - ABP4-5142 5 Chromate containing - No longer to be used A-UK
issue
219539
PPG
Not
TN150508 A-UK fillets and PRC DESOTO - PR1422GA - ABP4-5142 5 Chromate containing - No longer to be used A-UK
assessed
219539
PPG
High
TN150509 A-UK fillets and PRC DESOTO - PR1436GA - ABP4-5142 5 Chromate containing - No longer to be used A-UK
issue
219539
The product shall not be used with adhesion promoter
CHEMETALL MC-238 A
Overcoating of MC110 on epoxy FRP substrate with peel ply structure
AIMS04-05- IPS04-05- GMBH - Primer:MC110 Not
TN150510 A-UK fillets and AIMS04-05-001 ABP4-5142 5 unless the compatibility of the specific combination of -
001 001-28 LANGELSHEIM - Assessed
fastener lines FRP substrate, peel ply and the sealant with adhesion
268576
promoter has been proven
CHEMETALL
Overcoating of
AIMS04-05- IPS04-05- GMBH - Low
TN150511 A-UK fillets and MC-238 B - ABP4-5142 5 - A-UK
001 001-04 LANGELSHEIM - issue
fastener lines
268576
PPG
AIMS04-05- IPS04-05- Medium REACh targeted to be withrawn - use MC780-A
TN150512 A-UK fillets and PRC DESOTO - PR1783 - ABP4-5142 5 -
001 001-26 issue or PR1782-A, MC780-B or PR1782-B to AIMS04-05-001
219539
TN150513 A-UK fillets and EUROPE SAS - PR1782B - ABP4-5142 5 - -
001 001-27 issue
TN150514 A-UK fillets and EUROPE SAS - PR1782B - ABP4-5142 5 - -
014 014-05 issue
CHEMETALL MC780B
Overcoating of
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium
TN150515 A-UK fillets and - ABP4-5142 5 Refer to Process specification for Primer use -
fastener lines
268576
CHEMETALL MC780B
Overcoating of
TN150516 A-UK fillets and - ABP4-5142 5 Refer to Process specification for Primer use -
fastener lines
268576
Issue AJ Page 65
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 65 van 114
AIRBUS
AIRBUS
A00710010
No
used
AIMS04-05- High
TN150517 A-E fillets and EUROPE SAS - PR1422A Z16104 I+D-P-146 5 - A-E
001 issue
TN150518 A-E fillets and EUROPE SAS - PR1776AAS Z16156 I+D-P-146 5 Hollospheres containing - Change of catalyst A-E
001 001-05 issue
PR1782A
Overcoating of SEALANTS primer:PR 184 or
AIMS04-05- IPS04-05- Medium Z16176 AIMS04-
TN150519 A-E fillets and EUROPE SAS - primer:PR148AF I+D-P-146 5 - -
001 001-29 issue 05-014A
PR1782A
014 014-04 issue 05-014A
CHEMETALL MC780A
Overcoating of
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Z16176 AIMS04-
TN150521 A-E fillets and I+D-P-146 5 Refer to Process specification for Primer use -
001 001-20 LANGELSHEIM - issue 05-014A
fastener lines
268576
CHEMETALL MC780A
Overcoating of
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Z16176 AIMS04-
TN150522 A-E fillets and I+D-P-146 5 Refer to Process specification for Primer use -
fastener lines
268576
AIMS04-05- High
TN150523 - fillets and EUROPE SAS - PS 870 A Z16127 I+D-P-146 5 - A-E
006 issue
High DAN1159 WL5- Withdrawn because product contains chromates;
TN150524 A-D fillets and EUROPE SAS - PR1436GA 80-T-34-9600 5 A-D
issue 5961 Standard: WL5-5961
High Withdrawn because product contains chromates;
TN150525 - fillets and EUROPE SAS - PR1436G SPRAY MIL-S81733Typ3 80-T-34-9600 5 -
issue Standard: MIL-S-81733 Type III
TN150526 A-D fillets and EUROPE SAS - PR1436G SPRAY MIL-S81733Typ3 80-T-34-9600 5 A-D
issue Standard: MIL-S-81733 Type III
CHEMETALL
Overcoating of
AIMS04-05- IPS04-05- GMBH - Medium DAN1159AIMS04- REACh targeted to be withrawn - use MC780 A or
TN150527 A-D fillets and MC630A 80-T-34-9600 5 -
001 001-10 LANGELSHEIM - issue 05-001 PR1782 A to AIMS04-05-001
fastener lines
268576
CHEMETALL
Overcoating of
GMBH - Medium DAN1159AIMS04- REACh targeted to be withrawn - use MC780 A or
TN150528 A-D fillets and DAN1159 - MC630A 80-T-34-9600 5 -
LANGELSHEIM - issue 05-001 PR1782 A to AIMS04-05-001
fastener lines
268576
CHEMETALL MC780A
Overcoating of
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Contains hollospheres - Refer to Process specification
TN150529 A-D fillets and AIMS04-05-001 80-T-34-9600 5 -
001 001-20 LANGELSHEIM - issue for Primer use
fastener lines
268576
PR1782A
Overcoating of SEALANTS primer:PR148AF or
AIMS04-05- IPS04-05- Medium AIMS04-05-001
TN150530 A-D fillets and EUROPE SAS - primer:PR 184 80-T-34-9600 5 Contains hollospheres -
001 001-29 issue AIMS04-05-014
AIMS04-05- IPS04-05- PR1782A Medium AIMS04-05-001
TN150531 A-D fillets and EUROPE SAS - 80-T-34-9600 5 Contains hollospheres -
014 014-04 primer:PR148AF or issue AIMS04-05-014
Issue AJ Page 66
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 66 van 114
AIRBUS
AIRBUS
A00710010
No
used
primer:PR 184
High Standard: MIL-S-8802 C1, A; IPS: TH5.940; Process
TN150532 F fillets and EUROPE SAS - PR1422A PQ10010-005-00 5 -
issue Spec: TH6.6548
High chromated; Standard: MIL-S-81733 Type I, III; IPS:
TN150533 F fillets and EUROPE SAS - PR1436GA PQ10010-005-00 5 -
issue TH5.951/1; Process Spec: TH6.6548
High chromated; Standard: MIL-S-81733 Type I, III; IPS:
TN150534 F fillets and EUROPE SAS - PR1436G SPRAY PQ10010-005-00 5 -
issue TH5.951/3; Process Spec: TH6.6548
Overcoating of SEALANTS PR1422A
PR1422A NA High
TN150535 SON fillets and EUROPE SAS - - 5 Standard: MIL-S-8802 C1, A; Process Spec: PS6.5208 SON
issue

AIMS04-05- IPS04-05- PR1422A NA High
TN150536 SON fillets and EUROPE SAS - - 5 Process Spec: PS6.5208 SON
001 001-01 issue

AIMS04-05- IPS04-05- PR1422A NA High
TN150537 SON fillets and EUROPE SAS - - 5 Process Spec: PS6.5208 SON
002 002-03 issue
Overcoating of SEALANTS PR1436GA

PR1436GA NA High chromated; Standard: MIL-S-81733 Type I; Process
TN150538 SON fillets and EUROPE SAS - - 5 -
issue Spec: PS6.5205
High chromated; Standard: MIL-S-81733 Type III; Process
TN150539 SON fillets and EUROPE SAS - PR1436G SPRAY - 5 -
issue Spec: PS6.5205
PR1782A
AIMS04-05- IPS04-05- Not
001 001-29 assessed
PR1782A
014 014-04 assessed
PR1782A
Overcoating of SEALANTS primer:PR 184 or ABS5419AL6A
TN150542 A-F fillets and EUROPE SAS - primer:PR148AF PQ10010-022-00 5 Process Spec: IPDA77.01 -
001 001-29 assessed
PR1782A
Overcoating of SEALANTS primer:PR 184 or ABS5419AL6A
TN150543 A-F fillets and EUROPE SAS - primer:PR148AF PQ10010-022-00 5 Process Spec: IPDA77.01 -
014 014-04 assessed
PR1782A
AIMS04-05- IPS04-05- Not AIMS04-05-014A
001 001-29 assessed Z16176
Issue AJ Page 67
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 67 van 114
AIRBUS
AIRBUS
A00710010
No
used
PR1782A
014 014-04 assessed Z16176
PPG
AEROSPACE - PR1782A
Overcoating of primer:PR148AF or
AIMS04-05- IPS04-05- PRC-DESOTO Not AIMS04-05-001
TN150546 A-D fillets and primer:PR 184 80-T-34-9600 5 - -
001 001-29 INTERNATIONAL assessed AIMS04-05-014
fastener lines
- MOJAVE -
189173
PPG
AEROSPACE - PR1782A
Overcoating of primer:PR148AF or
AIMS04-05- IPS04-05- PRC-DESOTO Not AIMS04-05-001
TN150547 A-D fillets and primer:PR 184 80-T-34-9600 5 - -
014 014-04 INTERNATIONAL assessed AIMS04-05-014
fastener lines
- MOJAVE -
189173
PPG PR1782A
Overcoating of AEROSPACE primer:PR 184 or
AIMS04-05- IPS04-05- Not AIMS04-05-001
TN150548 A-D fillets and PRC DESOTO - primer:PR148AF 80-T-34-9600 5 - -
001 001-29 assessed AIMS04-05-014
219539
PPG PR1782A
Overcoating of AEROSPACE primer:PR 184 or
AIMS04-05- IPS04-05- Not AIMS04-05-001
TN150549 A-D fillets and PRC DESOTO - primer:PR148AF 80-T-34-9600 5 - -
014 014-04 assessed AIMS04-05-014
219539
PPG
AEROSPACE -
Overcoating of
AIMS04-05- IPS04-05- PRC-DESOTO Medium
TN150550 A-UK fillets and PR-2001B - ABP4-5142 5 - -
001 001-24 INTERNATIONAL Issue
fastener lines
- MOJAVE -
189173
PPG
AEROSPACE -
Overcoating of
AIMS04-05- IPS04-05- PRC-DESOTO Medium PQ10010-022-00
TN150551 A-F fillets and PR-2001B 5 Process Spec: IPDA77.01 -
001 001-24 INTERNATIONAL Issue PQ10010-022-08
fastener lines
- MOJAVE -
189173
PPG
AEROSPACE -
Overcoating of
TN150552 A-F fillets and PR-2001B 5 Process Spec: IPDA77.01 -
fastener lines
- MOJAVE -
189173
SEALANTS PR1436G
Aerodynamic B or C1 High PQ10010-008-00 No longer available; Standard: MIL-S-81733 Type II;
TN150553 A-F ASNA4156 EUROPE SAS - 8 A-F
smoothing issue PQ10010-008-01 Process Spec: IPDA77.01
BEZONS - 176949
3M FRANCE - EC 1675 B/A G
Aerodynamic TILLOY LEZ C1 or B Not PQ10010-008-00 No longer available; Standard: MIL-S-81733 Type II;
TN150554 A-F ASNA4158 8 A-F
smoothing CAMBRAI - assessed PQ10010-008-02 Process Spec: IPDA77.01
133379
SEALANTS
Aerodynamic High PQ10010-008-00
TN150555 A-F ASNB71132 ASNA4165 EUROPE SAS - PR1436GBNA 8 Process Spec: IPDA77.01 A-F
smoothing issue PQ10010-008-03
BEZONS - 176949
Issue AJ Page 68
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 68 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
Aerodynamic High PQ10010-008-00 Standard: MIL-S-81733 Type II; Process Spec:
smoothing issue PQ10010-008-04 IPDA77.01
BEZONS - 176949
PQ10010-008-00
SEALANTS
Aerodynamic AIMS04-05- IPS04-05- Medium PQ10010-008-05
TN150557 A-F EUROPE SAS - PR1771B 8 Change of catalyst; Process Spec: IPDA77.01 A-F
smoothing 001 001-17 issue ABS5419AL7B
BEZONS - 176949
ABS5419BL7B
PQ10010-008-00
SEALANTS
Aerodynamic AIMS04-05- IPS04-05- Medium PQ10010-008-05
TN150558 A-F EUROPE SAS - PR1771B 8 Change of catalyst; Process Spec: IPDA77.01 A-F
smoothing 004 004-02 issue ABS5419AL7B
BEZONS - 176949
ABS5419BL7B
Aerodynamic AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Refer to Process specification for Primer use; Process
TN150559 A-F PQ10010-008-06 8 -
smoothing 001 001-25 LANGELSHEIM - issue Spec: IPDA77.01
ABS5419AL6B
268576
Aerodynamic AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Refer to Process specification for Primer use; Process
TN150560 A-F PQ10010-008-06 8 -
smoothing 014 014-02 LANGELSHEIM - issue Spec: IPDA77.01
ABS5419AL6B
268576
Aerodynamic AIMS04-05- IPS04-05- Medium
smoothing 001 001-27 issue
PPG
AEROSPACE
Aerodynamic High Chromate containing - No longer to be used; Standard:
TN150563 A-UK PRC DESOTO - PR1436GB - 8 A-UK
smoothing issue MIL-S-81733 Type II
SHILDON -
219539
PPG
AEROSPACE
Aerodynamic High
TN150564 A-UK PRC DESOTO - PR340 - 8 Lead containing - No longer to be used A-UK
smoothing issue
SHILDON -
219539
PPG
AEROSPACE -
Aerodynamic AIMS04-05- IPS04-05- PRC-DESOTO Medium
TN150565 A-UK PR-2001B - ABP4-3329 8 - -
smoothing 001 001-24 INTERNATIONAL Issue
- MOJAVE -
189173
SEALANTS
BEZONS - 176949
SEALANTS
BEZONS - 176949
CHEMETALL MC780B
Aerodynamic AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium
smoothing 001 001-25 LANGELSHEIM - issue
268576
CHEMETALL MC780B
Aerodynamic AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium
smoothing 014 014-02 LANGELSHEIM - issue
268576
Issue AJ Page 69
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 69 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
Aerodynamic Medium
TN150570 A-E EUROPE SAS - PS870B Z16113 I+D-P-146 8 Standard: MIL-S-81733 Type II A-E
smoothing issue
BEZONS - 176949
SEALANTS
Aerodynamic High Chromate containing - No longer to be used; Standard:
TN150571 A-E EUROPE SAS - PR1436GB Z16113 I+D-P-146 8 A-E
smoothing issue MIL-S-81733 Type II
BEZONS - 176949
SEALANTS
Aerodynamic AIMS04-05- IPS04-05- Medium Z16177 AIMS04-
smoothing 001 001-27 issue 05-014B
BEZONS - 176949
SEALANTS
Aerodynamic AIMS04-05- IPS04-05- Medium Z16177 AIMS04-
smoothing 014 014-05 issue 05-014B
BEZONS - 176949
CHEMETALL MC780B
Aerodynamic AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Z16177 AIMS04-
smoothing 001 001-25 LANGELSHEIM - issue 05-014B
268576
CHEMETALL MC780B
Aerodynamic AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Z16177 AIMS04-
smoothing 014 014-02 LANGELSHEIM - issue 05-014B
268576
SEALANTS
Aerodynamic High DAN1186 WL5- Withdrawn because product contains chromates;
TN150576 A-D EUROPE SAS - PR1436GB 80-T-34-9600 8 A-D
smoothing issue 5962 Standard: WL5-5962
BEZONS - 176949
SEALANTS
Aerodynamic Not
TN150577 A-D EUROPE SAS - PR1445GB DAN1186 8 Withdrawn because product contains chromates A-D
smoothing assessed
BEZONS - 176949
SEALANTS
Aerodynamic IPS04-05- High
TN150578 A-D DAN1186 EUROPE SAS - PR1436B DAN1186 8 Withdrawn because the product contains chromates A-D
smoothing 001-07 issue
BEZONS - 176949
SEALANTS
Aerodynamic IPS04-05- High
TN150579 A-D DAN1186 EUROPE SAS - PR1445B DAN1186 80-T-34-9600 8 Withdrawn because product contains chromate A-D
smoothing 001-08 issue
BEZONS - 176949
CHEMETALL MC650B On titanium the product shall only be used with
Aerodynamic AIMS04-05- IPS04-05- GMBH - Primer:MC110 Medium DAN1186AIMS04- adhesion promoter MC110REACh targeted to
TN150580 A-D 80-T-34-9600 8 -
smoothing 001 001-09 LANGELSHEIM - issue 05-001 be withrawn - use MC780 B or PR1782 B to AIMS04-05-
268576 001
CHEMETALL MC650B On titanium the product shall only be used with
Aerodynamic GMBH - Primer:MC110 Medium DAN1186AIMS04- adhesion promoter MC110REACh targeted to
TN150581 A-D DAN1186 - 80-T-34-9600 8 -
smoothing LANGELSHEIM - issue 05-001 be withrawn - use MC780 B or PR1782 B to AIMS04-05-
268576 001
SEALANTS
Aerodynamic AIMS04-05- IPS04-05- Medium AIMS04-05-001
TN150582 A-D EUROPE SAS - PR1782B 80-T-34-9600 8 Contains hollospheres -
smoothing 001 001-27 issue AIMS04-05-014B
BEZONS - 176949
SEALANTS
TN150583 A-D EUROPE SAS - PR1782B 80-T-34-9600 8 Contains hollospheres -
BEZONS - 176949
CHEMETALL MC780B
Aerodynamic AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium AIMS04-05-001 Contains hollospheres - Refer to Process specification
TN150584 A-D 80-T-34-9600 8 -
smoothing 001 001-25 LANGELSHEIM - issue AIMS04-05-014B for Primer use
268576
CHEMETALL MC780B
Aerodynamic AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium AIMS04-05-001 Contains hollospheres - Refer to Process specification
TN150585 A-D 80-T-34-9600 8 -
smoothing 014 014-02 LANGELSHEIM - issue AIMS04-05-014B for Primer use
268576
Issue AJ Page 70
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 70 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
Aerodynamic AIMS04-05- IPS04-05- Medium No longer used - Hollospheres containing - Change of
TN150586 A-D EUROPE SAS - PR1776B AIMS04-05-001 80-T-34-9600 8 A-D
smoothing 001 001-06 issue catalyst
BEZONS - 176949
SEALANTS
Aerodynamic High DAN1186 WL5-
TN150587 A-D EUROPE SAS - JFM 1675 B/A 80-T-34-9600 8 Withdrawn; Standard: WL5-5962 A-D
smoothing issue 5962
BEZONS - 176949
SEALANTS
Aerodynamic High chromated; Standard: MIL-S-81733 Type II; IPS:
TN150588 F EUROPE SAS - PR1436GB PQ10010-008-00 8 -
smoothing issue TH5.951/2; Process Spec: TH6.6548
BEZONS - 176949
SEALANTS PR1436GB
Aerodynamic PR1436GB NA High chromated; Standard: MIL-S-81733 Type II; Process
TN150589 SON EUROPE SAS - - 8 SON
smoothing issue Spec: PS6.5205
BEZONS - 176949
SEALANTS
Aerodynamic Medium
smoothing issue
BEZONS - 176949
SEALANTS
Aerodynamic AIMS04-05- IPS04-05- Medium AIMS04-05-014B
smoothing 001 001-27 issue Z16177
BEZONS - 176949
SEALANTS
Aerodynamic AIMS04-05- IPS04-05- Medium AIMS04-05-014B
smoothing 014 014-05 issue Z16177
BEZONS - 176949
SEALANTS
TN150593 A-D EUROPE SAS - PR1782B 80-T-34-9600 8 Contains hollowspheres -
BEZONS - 176949
SEALANTS
TN150594 A-D EUROPE SAS - PR1782B 80-T-34-9600 8 Contains hollowspheres -
BEZONS - 176949
PPG
AEROSPACE -
Aerodynamic AIMS04-05- IPS04-05- PRC-DESOTO Medium PQ10010-008-00
smoothing 001 001-24 INTERNATIONAL Issue PQ10010-008-08
- MOJAVE -
189173
PPG
Covers for AEROSPACE
High Lead containing - No longer to be used; Standard:
TN150596 A-UK electrical PRC DESOTO - PR1201Q - ABP7-1250 9 A-UK
issue DTD900/4625
elements SHILDON -
219539
PPG
Covers for AEROSPACE
Not
TN150597 A-UK electrical PRC DESOTO - PR720 - 9 No longer available A-UK
assessed
elements SHILDON -
219539
Covers for SEALANTS
High
TN150598 A-E electrical EUROPE SAS - PR1201Q (Medium) Z16109 I+D-P-146 9 Standard: MIL-S-8516 A-E
issue
elements BEZONS - 176949
Covers for SEALANTS
Medium
TN150599 A-E electrical EUROPE SAS - PR1750A Z16117 I+D-P-146 9 Standard: SAE-AMS-3276 -
issue
Covers for SEALANTS
TN150600 A-D electrical EUROPE SAS - PR1436GA - 80-T-40-3210 9 A-D
issue Standard: WL5-5961
Covers for DAN1159WL5-
AIMS04-05- IPS04-05- CHEMETALL Medium REACh targeted to be withrawn - use MC780 A or
TN150601 A-D electrical MC630A 5961AIMS04-05- 80-T-34-9600 9 -
001 001-10 GMBH - issue PR1782 A to AIMS04-05-001
elements 001
Issue AJ Page 71
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 71 van 114
AIRBUS
AIRBUS
A00710010
No
used
LANGELSHEIM -
268576
CHEMETALL
GMBH - Medium REACh targeted to be withrawn - use MC780 A or
TN150602 A-D electrical DAN1159 - MC630A 5961AIMS04-05- 80-T-34-9600 9 -
LANGELSHEIM - issue PR1782 A to AIMS04-05-001
elements 001
268576
High temperature
resistant GC1500
C1 or B Not PQ10010-010-00
TN150603 A-F polysulphide, 10 - A-F
continuous
operation
Not
TN150604 A-D Firewall sealing - - _to_be_defined PS700 - DA2-657-2 161 Not for new design; Standard: MIL-S-38249 Type II -
Assessed
SEALANTS
High
TN150605 A-D Firewall sealing - - EUROPE SAS - PR812 - 161 Not for new design; Standard: TH5-948-2 -
issue
BEZONS - 176949
Aerodynamic
smoothing for AIMS04-05- High chromated; IPS: IPS04-05-004-01; Process Spec:
TN150606 A-F EUROPE SAS - PR1436GBNA PQ10010-012-01 12 A-F
engine cowls and 004 issue IPDA77.01
BEZONS - 176949 ABS5419BH6B
window frame
Aerodynamic CHEMETALL MC780B PQ10010-012-00
smoothing for AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Refer to Process specification for Primer use; Process
TN150607 A-F PQ10010-012-02 12 -
engine cowls and 001 001-25 LANGELSHEIM - issue Spec: IPDA77.01
ABS5419AL6B
window frame 268576
Aerodynamic
smoothing for AIMS04-05- IPS04-05- Medium Not recommended due to colour; Process Spec:
TN150608 A-F EUROPE SAS - PR1782B or PR1782B PQ10010-012-03 12 A-F
engine cowls and 001 001-27 issue IPDA77.01
BEZONS - 176949 PQ10010-012-00
window frame
PPG
Aerodynamic AEROSPACE -
smoothing for AIMS04-05- IPS04-05- PRC-DESOTO Medium PQ10010-012-00
engine cowls and 001 001-24 INTERNATIONAL Issue PQ10010-012-04
window frame - MOJAVE -
189173
TN153356 A-UK fillets and EUROPE SAS - - ABP4-5142 5 - -
001 001-29 Assessed
CHEMETALL MC780A
Overcoating of
AIMS04-05- IPS04-05- GMBH - Primer: MC115 Medium
TN153357 A-UK fillets and - ABP4-5142 5 - -
fastener lines
268576
CHEMETALL MC780A
AIMS04-05- IPS04-05- GMBH - Primer: MC115 Medium Contains hollospheres - Refer to Process
TN153358 A-D electrical 5961AIMS04-05- 80-T-34-9600 9 -
001 001-20 LANGELSHEIM - issue specification for Primer use
elements 001
268576
PR1782A
Covers for SEALANTS primer: PR148AF DAN1159WL5-
TN153359 A-D electrical EUROPE SAS - or (opt.): PR 184 5961AIMS04-05- 80-T-34-9600 9 - -
001 001-29 Assessed
elements BEZONS - 176949 001
Base:
SEALANTS PR1827R1/6-FBS
Interim bonding AIMS04-05- IPS04-05- Hardener: Low
TN153367 A-UK EUROPE SAS - AIMS04-05-017 - 1 - -
support materials 017 017-01 PR1827R1/6-FACC Issue
BEZONS - 176949
Issue AJ Page 72
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 72 van 114
AIRBUS
Al~SUS
A00710010
No
used
PPG
DEUTSCHLAND
Interfay for AIMS04-05- IPS04-05- SALES & PR-2001B Medium AIMS04-
TN153369 A-UK ABP4-5142 1 New PPG repacking site added -
permanent joints 001 001-24 SERVICES GMBH Issue 05-001
- HAMBURG -
189164
PPG
DEUTSCHLAND
PR-2001B
Interfay for AIMS04-05- IPS04-05- SALES & Medium AIMS04-05-
TN153370 A-UK ABP4-5142 1 New PPG repacking side added -
permanent joints 001 001-24 SERVICES GMBH Issue 001
- HAMBURG -
189164
PPG
DEUTSCHLAND
Fillets and filling AIMS04-05- IPS04-05- SALES & PR-2001B Medium
TN153371 A-UK AIMS04-05-001 ABP4-5142 3 New PPG repacking side added -
of cavities 001 001-24 SERVICES GMBH Issue
- HAMBURG -
189164
PPG
DEUTSCHLAND
Fillets and filling AIMS04-05- IPS04-05- SALES & PR-2001B Medium
TN153372 A-UK AIMS04-05-001. ABP4-5142 3 New PPG repacking side added -
of cavities 001 001-24 SERVICES GMBH Issue
- HAMBURG -
189164
PPG
DEUTSCHLAND
Overcoating of PR-2001B
AIMS04-05- IPS04-05- SALES & Medium
TN153373 A-UK fillets and AIMS04-05-001 ABP4-5142 5 New PPG repacking side added -
001 001-24 SERVICES GMBH Issue
fastener lines
- HAMBURG -
189164
PPG
DEUTSCHLAND
Overcoating of PR-2001B
TN153374 A-UK fillets and AIMS04-05-001 ABP4-5142 5 New PPG repacking side added -
fastener lines
- HAMBURG -
189164
PPG
DEUTSCHLAND
Aerodynamic AIMS04-05- IPS04-05- SALES & PR-2001B Medium
smoothing 001 001-24 SERVICES GMBH Issue
- HAMBURG -
189164
PPG
DEUTSCHLAND
Aerodynamic AIMS04-05- IPS04-05- SALES & PR-2001B Medium
smoothing 001 001-24 SERVICES GMBH Issue
- HAMBURG -
189164
PPG
DEUTSCHLAND
PR-2001B PQ10010-001-
Interfay for AIMS04-05- IPS04-05- SALES & Medium Process Spec: IPDA77.01 New PPG repacking
TN153383 A-F 00PQ10010-001- IPDA77-01 1 -
permanent joints 001 001-24 SERVICES GMBH Issue side added
10
- HAMBURG -
189164
Issue AJ Page 73
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 73 von 114
AIRBUS
AIRBUS
A00710010
No
used
PPG
DEUTSCHLAND
PR-2001B PQ10010-020-
TN153384 A-F 00PQ10010-020- IPDA77-01 1 -
09
- HAMBURG -
189164
PPG
DEUTSCHLAND
PR-2001B PQ10010-003-
Fillets and filling AIMS04-05- IPS04-05- SALES & Medium Process Spec: IPDA77.01 New PPG repacking
TN153385 A-F 00PQ10010-003- IPDA77-01 3 -
of cavities 001 001-24 SERVICES GMBH Issue side added
07
- HAMBURG -
189164
PPG
DEUTSCHLAND
PR-2001B PQ10010-021-
Fillets and filling AIMS04-05- IPS04-05- SALES & Medium Process Spec: IPDA77.01 New PPG repacking
TN153386 A-F 00PQ10010-021- IPDA77-01 3 -
of cavities 001 001-24 SERVICES GMBH Issue side added
07
- HAMBURG -
189164
PPG
DEUTSCHLAND
Overcoating of PR-2001B PQ10010-022-
AIMS04-05- IPS04-05- SALES & Medium Process Spec: IPDA77.01 New PPG repacking
TN153387 A-F fillets and 00PQ10010-022- IPDA77-01 5 -
001 001-24 SERVICES GMBH Issue side added
fastener lines 08
- HAMBURG -
189164
PPG
DEUTSCHLAND
Overcoating of PR-2001B PQ10010-005-
TN153388 A-F fillets and 00PQ10010-005- IPDA77-01 5 -
fastener lines 07
- HAMBURG -
189164
PPG
DEUTSCHLAND
PR-2001B PQ10010-008-
Aerodynamic AIMS04-05- IPS04-05- SALES & Medium Process Spec: IPDA77.01 New PPG repacking
TN153389 A-F 00PQ10010-008- IPDA77-01 8 -
smoothing 001 001-24 SERVICES GMBH Issue side added
08
- HAMBURG -
189164
PPG
Aerodynamic DEUTSCHLAND
PR-2001B PQ10010-012-
smoothing for AIMS04-05- IPS04-05- SALES & Medium Process Spec: IPDA77.01 New PPG repacking
TN153390 A-F 00PQ10010-012- IPDA77-01 12 -
engine cowls and 001 001-24 SERVICES GMBH Issue side added
04
window frame - HAMBURG -
189164
Base:
SEALANTS PR1827R1/6-FBS The material shall only be used for the temporary fixation
Interfay for AIMS04-05- IPS04-05- Hardener: Low
TN153402 A-UK EUROPE SAS - AIMS04-05-017 - 1 of small parts during manufacturing and not used as a -
permanent joints 017 017-01 PR1827R1/6-FACC Issue
BEZONS - 176949 permanent joint
BASE: MC-216M
CHEMETALL B-2 HARDENER:
Interfay for low AIMS04-05- IPS04-05- GMBH - NAFTOSEAL MC-216M Not
TN153443 A-UK AIMS04-05-006 2
adhesion joints 006 006-08 LANGELSHEIM - B-2 HARDENER Assessed
268576
Interfay for low AIMS04-05- IPS04-05- CHEMETALL BASE: MC-216M Not

TN153446 A-UK AIMS04-05-006 2
adhesion joints 006 006-07 GMBH - A-2 HARDENER: Assessed
Issue AJ Page 74
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 74 von 114
AIRBUS
AIRBUS
A00710010
No
used
LANGELSHEIM - MC-216M A-2
268576 HARDENER
2 - POLYSULPHIDES FOR CORROSION SENSITIVE AREAS

Not
TN150610 - Interfay - - _to_be_defined Not available PQ10010-020-00 1 - -
Assessed
TN150611 - - - _to_be_defined Not available PQ10010-021-00 3 - -
of cavities Assessed
Overcoating of
Not
TN150612 - fillets and - - _to_be_defined Not available PQ10010-022-00 5 - -
Assessed
fastener lines
Interfay for low Not
adhesion joints Assessed
Wet assembly of Not
rivets Assessed
3 - POLYSULPHIDES FOR SEALING INSIDE FUEL TANKS
SEALANTS
Interfay for High PQ10010-050-00 No longer available; Standard: MIL-S-8802 C1,B or C;
permanent joints issue PQ10010-050-01 Process Spec: IPDA77.01
BEZONS - 176949
SEALANTS
Interfay for High PQ10010-050-00 Standard: MIL-S-8802 C1,B or C; Process Spec:
TN150616 A-F ASNA4171 EUROPE SAS - PR1431Type I 50 A-F
BEZONS - 176949
Interfay for High
SEALANTS
Interfay for High PQ10010-050-00 Standard: MIL-S-8802 C1,B or C; Process Spec:
BEZONS - 176949
ABS5459AM7B
SEALANTS
Interfay for AIMS04-05- IPS04-05- Medium PQ10010-050-00 Hollospheres containing - Change of catalyst; Process
permanent joints 002 002-06 issue PQ10010-050-05 Spec: IPDA77.01
BEZONS - 176949
ABS5459DM7B
ABS5459AM7B
SEALANTS
Interfay for Medium PQ10010-050-00 Hollospheres containing - Change of catalyst; Process
TN150622 A-F ASNB71070 ASNA4157 EUROPE SAS - PR1776B 50 A-F
permanent joints issue PQ10010-050-05 Spec: IPDA77.01
BEZONS - 176949
ABS5459DM7B
ABS5459AM7B
SEALANTS
Interfay for AIMS04-05- IPS04-05- Medium PQ10010-050-00 Hollospheres containing - Change of catalyst; Process
permanent joints 012 012-02 issue PQ10010-050-05 Spec: IPDA77.01
BEZONS - 176949
ABS5459DM7B
TN150624 A-F EUROPE SAS - PS892C PQ10010-050-06 50 Change of catalyst; Process Spec: IPDA77.01 A-F
CHEMETALL
PQ10010-050-00
Interfay for AIMS04-05- IPS04-05- GMBH - Medium
TN150625 A-F MC780C PQ10010-050-07 50 Process Spec: IPDA77.01 -
ABS5459DM0C
268576
Issue AJ Page 75
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 75 van 114
AIRBUS
AIRBUS
A00710010
No
used
CHEMETALL
PQ10010-050-00
TN150626 A-F MC780C PQ10010-050-07 50 Process Spec: IPDA77.01 -
ABS5459DM0C
268576
BEZONS - 176949 ABS5459DM0C
BEZONS - 176949 ABS5459DM0C
PPG
AEROSPACE
Interfay for High
TN150629 A-UK PRC DESOTO - PR1422A - ABP4-5141 50 Chromate containing - No longer to be used A-UK
SHILDON -
219539
PPG
PR1431
AEROSPACE
Interfay for Type T6 or Type T High
SHILDON -
219539
PPG
PR1431
AEROSPACE
Interfay for Type I or Type II High
SHILDON -
219539
PPG
AEROSPACE
Interfay for High
SHILDON -
219539
PPG
AEROSPACE
Interfay for AIMS04-05- IPS04-05- Medium REACh targeted to be withrawn - use MC780 C or
TN150633 A-UK PRC DESOTO - PR1783 - ABP4-5141 50 -
permanent joints 012 012-07 issue PR1782 C to AIMS04-05-012
SHILDON -
219539
TN150634 A-UK _to_be_defined PR1782C - ABP4-5141 50 - -
TN150635 A-UK _to_be_defined PR1782C - ABP4-5141 50 - -
CHEMETALL
TN150636 A-UK MC780C - ABP4-5141 50 - -
268576
CHEMETALL
TN150637 A-UK MC780C - ABP4-5141 50 - -
268576
CHEMETALL
Interfay for AIMS04-05- IPS04-05- GMBH - Not
TN150638 A-UK MC-238 B PQ10010-050-00 ABP4-5141 50 - -
permanent joints 002 002-02 LANGELSHEIM - Assessed
268576
PPG
AEROSPACE
TN150639 A-UK PRC DESOTO - PR1770C - ABP4-5141 50 Change of catalyst A-UK
SHILDON -
219539
Issue AJ Page 76
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 76 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
Interfay for AIMS04-05- IPS04-05- PR1422ANA or High
TN150640 A-E EUROPE SAS - Z16104 I+D-P-062 50 - A-E
permanent joints 001 001-01 PR1422ANA issue
BEZONS - 176949
SEALANTS
TN150641 A-E EUROPE SAS - PR1776AAS Z16156 I+D-P-062 50 Hollospheres containing - Change of catalyst A-E
BEZONS - 176949
PR1431G
SEALANTS Type I
Interfay for High
TN150642 A-E MIL-S-81733 EUROPE SAS - C24 or C12 Z16101 I+D-P-062 50 - A-E
BEZONS - 176949
SEALANTS PS892
Interfay for AIMS04-05- IPS04-05- C12 or C24 or C48 Medium
TN150643 A-E EUROPE SAS - Z16101 I+D-P-062 50 Change of catalyst A-E
BEZONS - 176949
SEALANTS
BEZONS - 176949
SEALANTS
BEZONS - 176949
CHEMETALL
Interfay for AIMS04-05- IPS04-05- GMBH - Medium Z16171 AIMS04-
TN150646 A-E MC780C I+D-P-062 50 - -
268576
CHEMETALL
Interfay for AIMS04-05- IPS04-05- GMBH - Medium Z16171 AIMS04-
TN150647 A-E MC780C I+D-P-062 50 - -
268576
SEALANTS
Interfay for Medium
TN150648 A-E EUROPE SAS - PR1750A Z16117 I+D-P-062 50 Standard: SAE-AMS-3276 -
BEZONS - 176949
SEALANTS
Interfay for High
TN150649 A-D EUROPE SAS - PR1431 - 80-T-34-9600 50 Standard: WL5-5903 -
BEZONS - 176949
SEALANTS
permanent joints 012 012-10 issue AIMS04-05-015C
BEZONS - 176949
SEALANTS
BEZONS - 176949
CHEMETALL
Interfay for AIMS04-05- IPS04-05- GMBH - Medium AIMS04-05-012
TN150652 A-D MC780C 80-T-34-9600 50 - -
268576
CHEMETALL
Interfay for AIMS04-05- IPS04-05- GMBH - Medium AIMS04-05-012
TN150653 A-D MC780C 80-T-34-9600 50 - -
268576
TN150654 A-D _to_be_defined PR1782C 80-T-34-9600 50 - -
TN150655 A-D _to_be_defined PR1782C 80-T-34-9600 50 - -
SEALANTS
Interfay for IPS04-05- High DAN1186 WL5- Chromate containing - No longer to be used; Standard:
TN150656 A-D EUROPE SAS - PR1422BNA 80-T-34-9600 50 A-D
permanent joints 001-02 issue 5902 WL5-5902
BEZONS - 176949
Issue AJ Page 77
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 77 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
Interfay for IPS04-05- High DAN1186 WL5- Chromate containing - No longer to be used; Standard:
TN150657 A-D EUROPE SAS - PR1422BNA 80-T-34-9600 50 A-D
permanent joints 002-04 issue 5902 WL5-5902
BEZONS - 176949
ABS5459DM0C
TN150658 A-F _to_be_defined PR1782C PQ10010-050-00 50 Process Spec: IPDA77.01 -
PQ10010-050-08
ABS5459DM0C
TN150659 A-F _to_be_defined PR1782C PQ10010-050-00 50 Process Spec: IPDA77.01 -
PQ10010-050-08
SEALANTS
TN150660 A-UK EUROPE SAS - PR1782C - ABP4-5141 50 - -
BEZONS - 176949
SEALANTS
TN150661 A-UK EUROPE SAS - PR1782C - ABP4-5141 50 - -
BEZONS - 176949
PPG
AEROSPACE -
- MOJAVE -
189173
SEALANTS
TN150665 A-F EUROPE SAS - PR1321B 51 No longer available, use PQ10010-002-00. A-F
BEZONS - 176949
PPG
AEROSPACE
TN150666 A-UK PRC DESOTO - PR1301 - 51 Disqualified A-UK
SHILDON -
219539
PPG
AEROSPACE
TN150667 A-UK PRC DESOTO - PR1403GANA - ABP4-5141 51 Chromate containing - No longer to be used A-UK
SHILDON -
219539
PPG
AEROSPACE
TN150668 A-UK PRC DESOTO - PR1403GBNA - ABP4-5141 51 Chromate containing - No longer to be used A-UK
SHILDON -
219539
SEALANTS
BEZONS - 176949
PPG
AEROSPACE
TN150670 A-UK PRC DESOTO - PR1428B - ABP4-5141 51 Change of catalyst A-UK
SHILDON -
219539
CHEMETALL
TN150671 A-UK MC-216 B - ABP4-5141 51 - -
268576
Issue AJ Page 78
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 78 van 114
AIRBUS
AIRISUS
A00710010
No
used
SEALANTS
Interfay for low Not No longer available, use Z-16.161.; Standard: MIL-S-
TN150672 A-E EUROPE SAS - PR1428B Z16110 I+D-P-062 51 A-E
adhesion joints assessed 8784 C1, B
BEZONS - 176949
SEALANTS
TN150673 A-E EUROPE SAS - PR1773A2 Z16160 I+D-P-146 51 - -
BEZONS - 176949
CHEMETALL
TN150674 A-E MC-216 A Z16160 I+D-P-146 51 - -
268576
SEALANTS
TN150675 A-E EUROPE SAS - PR1773B2 Z16161 I+D-P-146 51 - -
BEZONS - 176949
CHEMETALL
TN150676 A-E MC-216 B Z16161 I+D-P-146 51 - -
268576
CHEMETALL
TN150677 A-D MC-216 B AIMS04-05-006 80-T-34-9600 51 - -
268576
CHEMETALL
TN150678 A-D MC-216 A AIMS04-05-006 80-T-34-9600 51 - -
268576
SEALANTS
TN150679 A-D EUROPE SAS - PR1773A AIMS04-05-006 80-T-34-9600 51 - -
BEZONS - 176949
SEALANTS
BEZONS - 176949
SEALANTS
TN150681 A-D EUROPE SAS - PR1321B - 80-T-34-9600 51 Withdrawn; Standard: MIL-S-8784 C1, B A-D
BEZONS - 176949
Fillets and filling
SEALANTS
of cavities, High PQ10010-052-00 No longer available; Standard: MIL-S-8802 C1,B;
Coating of large issue PQ10010-052-01 Process Spec: IPDA77.01
BEZONS - 176949
fasteners
Fillets and filling
of cavities, High
Coating of large issue
fasteners
Fillets and filling
of cavities, AIMS04-05- IPS04-05- High
Coating of large 002 002-04 issue
fasteners
Fillets and filling PQ10010-052-00
SEALANTS
of cavities, Medium PQ10010-052-03 Hollospheres containing - Change of catalyst; Process
TN150685 A-F ASNB71070 ASNA4157 EUROPE SAS - PR1776B 52 A-F
Coating of large issue ABS5459AM7B Spec: IPDA77.01
BEZONS - 176949
fasteners ABS5459DM7B
SEALANTS
of cavities, AIMS04-05- IPS04-05- Medium PQ10010-052-03 Hollospheres containing - Change of catalyst; Process
Coating of large 002 002-06 issue ABS5459AM7B Spec: IPDA77.01
BEZONS - 176949
Issue AJ Page 79
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 79 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS
of cavities, AIMS04-05- IPS04-05- Medium PQ10010-052-03 Hollospheres containing - Change of catalyst; Process
Coating of large 012 012-02 issue ABS5459AM7B Spec: IPDA77.01
BEZONS - 176949
Fillets and filling
SEALANTS ABS5459AH0B
of cavities, AIMS04-05- IPS04-05- Medium
TN150688 A-F EUROPE SAS - PR1828 B LO PQ10010-052-04 52 Process Spec: IPDA77.01 A-F
BEZONS - 176949 PQ10010-052-00
fasteners
Fillets and filling CHEMETALL
PQ10010-052-00
of cavities, AIMS04-05- IPS04-05- GMBH - Medium PQ10010-052-04 replaced by -06 (not used); Process
TN150689 A-F MC780B PQ10010-052-06 52 -
Coating of large 012 012-04 LANGELSHEIM - issue Spec: IPDA77.01
ABS5459DL6B
fasteners 268576
PQ10010-052-00
of cavities, AIMS04-05- IPS04-05- GMBH - Medium PQ10010-052-04 replaced by -06 (not used); Process
TN150690 A-F MC780B PQ10010-052-06 52 -
Coating of large 015 015-01 LANGELSHEIM - issue Spec: IPDA77.01
ABS5459DL6B
fasteners 268576
Fillets and filling
SEALANTS ABS5459DL6B
BEZONS - 176949 PQ10010-052-00
fasteners
Fillets and filling
SEALANTS ABS5459DL6B
BEZONS - 176949 PQ10010-052-00
fasteners
PPG
Fillets and filling
AEROSPACE
of cavities, High
TN150693 A-UK PRC DESOTO - PR1422B - ABP4-5141 52 Chromate containing - No longer to be used A-UK
SHILDON -
fasteners
219539
PPG
Fillets and filling
AEROSPACE
of cavities, High
SHILDON -
fasteners
219539
of cavities, AIMS04-05- GMBH - Medium
TN150695 A-UK MC-238 A - 52 Inappropriate-viscosity too low A-UK
Coating of large 002 LANGELSHEIM - issue
fasteners 268576
of cavities, AIMS04-05- IPS04-05- GMBH - Low
TN150696 A-UK MC-238 B ABS5459AH0MP ABP4-5141 52 - -
Coating of large 001 001-04 LANGELSHEIM - issue
fasteners 268576
TN150697 A-UK MC-238 B ABS5459AH0MP ABP4-5141 52 - -
fasteners 268576
PPG
Fillets and filling
AEROSPACE
of cavities, AIMS04-05- Medium
TN150698 A-UK PRC DESOTO - PR1779B - ABP4-5141 52 Disqualified -
Coating of large 012 issue
SHILDON -
fasteners
219539
Fillets and filling PPG
of cavities, AIMS04-05- IPS04-05- AEROSPACE - Medium
TN150699 A-UK PR-2001B ABS5459DH6MP ABP4-5141 52 - -
Coating of large 012 012-03 PRC-DESOTO Issue
fasteners INTERNATIONAL
Issue AJ Page 80
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 80 van 114
AIRBUS
AIRBUS
A00710010
No
used
- MOJAVE -
189173
Fillets and filling
SEALANTS
BEZONS - 176949
fasteners
Fillets and filling
SEALANTS
BEZONS - 176949
fasteners
of cavities, AIMS04-05- IPS04-05- GMBH - Medium
TN150702 A-UK MC780B - ABP4-5141 52 - -
fasteners 268576
of cavities, AIMS04-05- IPS04-05- GMBH - Medium
TN150703 A-UK MC780B - ABP4-5141 52 - -
fasteners 268576
Fillets and filling
SEALANTS
TN150704 A-E EUROPE SAS - PR1422BNA Z16107 I+D-P-062 52 Chromate containing - No longer to be used A-E
BEZONS - 176949
fasteners
Fillets and filling
SEALANTS
TN150705 A-E EUROPE SAS - PR1422BNA Z16107 I+D-P-062 52 Chromate containing - No longer to be used A-E
BEZONS - 176949
fasteners
Fillets and filling
SEALANTS
TN150706 A-E EUROPE SAS - PR1776B Z16157 I+D-P-062 52 Change of catalyst A-E
BEZONS - 176949
fasteners
Fillets and filling
SEALANTS
of cavities, AIMS04-05- IPS04-05- Medium Z16177 AIMS04-
Coating of large 012 012-08 issue 05-015B
BEZONS - 176949
fasteners
Fillets and filling
SEALANTS
of cavities, AIMS04-05- IPS04-05- Medium Z16177 AIMS04-
Coating of large 015 015-05 issue 05-015B
BEZONS - 176949
fasteners
of cavities, AIMS04-05- IPS04-05- GMBH - Medium Z16177 AIMS04-
TN150709 A-E MC780B I+D-P-062 52 - -
Coating of large 012 012-04 LANGELSHEIM - issue 05-015B
fasteners 268576
of cavities, AIMS04-05- IPS04-05- GMBH - Medium Z16177 AIMS04-
TN150710 A-E MC780B I+D-P-062 52 - -
Coating of large 015 015-01 LANGELSHEIM - issue 05-015B
fasteners 268576
Fillets and filling
SEALANTS
of cavities, Medium
TN150711 A-E EUROPE SAS - PR1750B Z16118 I+D-P-062 52 Variant B2 shall not be used;Standard: SAE-AMS-3276 -
BEZONS - 176949
fasteners
Fillets and filling
SEALANTS
of cavities, High DAN1184 WL5-
TN150712 A-D EUROPE SAS - PR1422B 80-T-34-9600 52 Standard: WL5-5962 A-D
Coating of large issue 5962
BEZONS - 176949
fasteners
Issue AJ Page 81
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite81 van 114
AIRBUS
AIRBUS
A00710010
No
used
Fillets and filling 3M FRANCE -
of cavities, TILLOY LEZ Not
TN150713 A-D EC1675B - 52 No longer used A-D
Coating of large CAMBRAI - assessed
fasteners 133379
TN150714 A-D MC-238 B AIMS04-05-002 80-T-34-9600 52 - -
fasteners 268576
Fillets and filling
SEALANTS
TN150715 A-D EUROPE SAS - PR1782B AIMS04-05-001 80-T-34-9600 52 Contains hollospheres -
BEZONS - 176949
fasteners
Fillets and filling CHEMETALL MC780B
of cavities, AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Contains hollospheres - Refer to Process specification
TN150716 A-D AIMS04-05-001 80-T-34-9600 52 -
Coating of large 001 001-25 LANGELSHEIM - issue for Primer use
fasteners 268576
SEALANTS
TN150717 A-D EUROPE SAS - PR1776B AIMS04-05-001 80-T-34-9600 52 No longer used - Change of catalyst A-D
BEZONS - 176949
Fillets and filling
BEZONS - 176949 ABS5459DL6B
fasteners
Fillets and filling
BEZONS - 176949 ABS5459DL6B
fasteners
Fillets and filling
SEALANTS
of cavities, AIMS04-05- IPS04-05- Medium AIMS04-05-015B
Coating of large 012 012-08 issue Z16177
BEZONS - 176949
fasteners
Fillets and filling
SEALANTS
of cavities, AIMS04-05- IPS04-05- Medium AIMS04-05-015B
Coating of large 015 015-05 issue Z16177
BEZONS - 176949
fasteners
of cavities, AIMS04-05- IPS04-05- GMBH - Not PQ10010-052-00 Authorized for A380 fuel tank,TQ: WQ-10478; Process
TN150722 A-F MC-238 B 52 -
Coating of large 002 002-02 LANGELSHEIM - assessed PQ10010-052-07 Spec: IPDA77.01
fasteners 268576
PPG
Fillets and filling
AEROSPACE
of cavities, AIMS04-05- IPS04-05- Not Supplier approved for Customer Service repair
TN150723 A-D PRC DESOTO - PR1782B - 80-T-34-9600 52 -
Coating of large 012 012-08 assessed operations
SHILDON -
fasteners
219539
PPG
Fillets and filling
AEROSPACE
of cavities, AIMS04-05- IPS04-05- Not Supplier approved for Customer Service repair
TN150724 A-D PRC DESOTO - PR1782B - 80-T-34-9600 52 -
Coating of large 015 015-05 assessed operations
SHILDON -
fasteners
219539
PPG
Fillets and filling AEROSPACE -
of cavities, AIMS04-05- IPS04-05- PRC-DESOTO Medium PQ10010-052-00
Coating of large 001 001-24 INTERNATIONAL Issue PQ10010-052-08
fasteners - MOJAVE -
189173
Issue AJ Page 82
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 82 van 114
AIRBUS
AIRBUS
A00710010
No
used
Overcoating of
SEALANTS
fillets and High PQ10010-053-00 No longer available; Standard: MIL-S-8802 C1,A;
TN150726 A-F ASNA4159 EUROPE SAS - PR1422A 53 A-F
fastener lines issue PQ10010-053-01 Process Spec: IPDA77.01
BEZONS - 176949
permanent joints
Overcoating of
fillets and AIMS04-05- IPS04-05- High
TN150727 A-F EUROPE SAS - PR1422ANA PQ10010-053-02 53 Process Spec: IPDA77.01 A-F
fastener lines 002 002-03 issue
BEZONS - 176949 ABS5459AH0A
permanent joints
Overcoating of
fillets and High
TN150728 A-F ASNB71152 ASNA4163 EUROPE SAS - PR1422ANA PQ10010-053-02 53 Process Spec: IPDA77.01 A-F
fastener lines issue
BEZONS - 176949 ABS5459AH0A
permanent joints
Overcoating of
fillets and AIMS04-05- IPS04-05- High Hollospheres containing - Change of catalyst; Process
TN150729 A-F EUROPE SAS - PR1776AAS PQ10010-053-03 53 A-F
fastener lines 002 002-05 issue Spec: IPDA77.01
BEZONS - 176949 ABS5459AM7A
permanent joints
Overcoating of
fillets and High Hollospheres containing - Change of catalyst; Process
TN150730 A-F ASNB71070 ASNA4157 EUROPE SAS - PR1776AAS PQ10010-053-03 53 A-F
fastener lines issue Spec: IPDA77.01
BEZONS - 176949 ABS5459AM7A
permanent joints
Overcoating of CHEMETALL
PQ10010-053-00
fillets and AIMS04-05- IPS04-05- GMBH - Medium
TN150731 A-F MC780A PQ10010-053-04 53 Process Spec: IPDA77.01 -
fastener lines 012 012-05 LANGELSHEIM - issue
ABS5459DM6A
permanent joints 268576
PQ10010-053-00
TN150732 A-F MC780A PQ10010-053-04 53 Process Spec: IPDA77.01 -
ABS5459DM6A
Overcoating of
fillets and AIMS04-05- IPS04-05- Medium
TN150733 A-F EUROPE SAS - PR1782A PQ10010-053-05 53 Process Spec: IPDA77.01 -
BEZONS - 176949 ABS5459DL6A
permanent joints
Overcoating of
BEZONS - 176949 ABS5459DL6A
permanent joints
PPG
Overcoating of
AEROSPACE
fillets and High
TN150735 A-UK PRC DESOTO - PR1422A - ABP4-5141 53 Chromate containing - No longer to be used A-UK
SHILDON -
permanent joints
219539
PPG
Overcoating of
AEROSPACE
fillets and Not
TN150736 A-UK PRC DESOTO - PR5401K - 53 Chromate containing - No longer to be used A-UK
fastener lines assessed
SHILDON -
permanent joints
219539
PPG
Overcoating of
AEROSPACE
fillets and High
TN150737 A-UK PRC DESOTO - PR1422ANA - ABP4-5141 53 Chromate containing - No longer to be used A-UK
SHILDON -
permanent joints
219539
PPG
Overcoating of
AEROSPACE
fillets and High
TN150738 A-UK PRC DESOTO - PR7422 - ABP4-5141 53 Chromate containing - No longer to be used A-UK
SHILDON -
permanent joints
219539
Issue AJ Page 83
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 83 van 114
AIRBUS
AIRBUS
A00710010
No
used
PPG
Overcoating of
AEROSPACE
fillets and High
TN150739 A-UK PRC DESOTO - PR7422NA - ABP4-5141 53 Chromate containing - No longer to be used A-UK
SHILDON -
permanent joints
219539
TN150740 A-UK MC-238 A ABS5459AH0AP ABP4-5141 53 - -
fillets and AIMS04-05- IPS04-05- GMBH - Low
TN150741 A-UK MC-238 B ABS5459AH0AP ABP4-5141 53 - A-UK
fillets and AIMS04-05- IPS04-05- GMBH - Low
TN150742 A-UK MC-238 B ABS5459AH0AP ABP4-5141 53 - A-UK
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Medium REACh targeted to be withrawn - use MC780-A,
TN150743 A-UK EUROPE SAS - PR1783 - ABP4-5141 53 -
fastener lines 012 012-07 issue PR1782-A, MC780-B or PR1782-B to AIMS04-05-012
BEZONS - 176949
permanent joints
PPG
Overcoating of AEROSPACE -
fillets and AIMS04-05- IPS04-05- PRC-DESOTO Medium
TN150744 A-UK PR-2001B - ABP4-5141 53 - -
fastener lines 012 012-03 INTERNATIONAL Issue
permanent joints - MOJAVE -
189173
Overcoating of
SEALANTS
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
BEZONS - 176949
permanent joints
TN150747 A-UK MC780 B - ABP4-5141 53 - -
TN150748 A-UK MC780 B - ABP4-5141 53 - -
Overcoating of
SEALANTS
TN150749 A-E EUROPE SAS - PR1422ANA Z16104 I+D-P-062 53 - A-E
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
TN150750 A-E EUROPE SAS - PR1422ANA Z16104 I+D-P-062 53 - A-E
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
BEZONS - 176949
permanent joints
Issue AJ Page 84
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 84 van 114
AIRBUS
AIRBUS
A00710010
No
used
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Medium Z16176 AIMS04-
TN150752 A-E EUROPE SAS - PR1782A I+D-P-062 53 - -
fastener lines 012 012-09 issue 05-015A
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
fastener lines 015 015-04 issue 05-015A
BEZONS - 176949
permanent joints
fillets and AIMS04-05- IPS04-05- GMBH - Medium Z16176 AIMS04-
TN150754 A-E MC780A I+D-P-062 53 - -
fastener lines 012 012-05 LANGELSHEIM - issue 05-015A
TN150755 A-E MC780A I+D-P-062 53 - -
fastener lines 015 015-03 LANGELSHEIM - issue 05-015A
Overcoating of
SEALANTS
fastener lines 012 012-08 issue 05-015B
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
fastener lines 015 015-05 issue 05-015B
BEZONS - 176949
permanent joints
TN150758 A-E MC780B I+D-P-062 53 - -
fastener lines 012 012-04 LANGELSHEIM - issue 05-015B
TN150759 A-E MC780B I+D-P-062 53 - -
fastener lines 015 015-01 LANGELSHEIM - issue 05-015B
Overcoating of
SEALANTS
fillets and Medium
TN150760 A-E EUROPE SAS - PR1750A Z16177 I+D-P-062 53 Standard: SAE-AMS-3276 -
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Medium AIMS04-05-012
TN150761 A-D EUROPE SAS - PR1782A 80-T-34-9600 53 Contains hollospheres -
fastener lines 012 012-09 issue AIMS04-05-015A
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Medium AIMS04-05-012
TN150762 A-D EUROPE SAS - PR1782A 80-T-34-9600 53 Contains hollospheres -
fastener lines 015 015-04 issue AIMS04-05-015A
BEZONS - 176949
permanent joints
fillets and AIMS04-05- IPS04-05- GMBH - Medium AIMS04-05-012
TN150763 A-D MC780A 80-T-34-9600 53 Contains hollospheres -
fastener lines 012 012-05 LANGELSHEIM - issue AIMS04-05-015A
fillets and AIMS04-05- IPS04-05- GMBH - Medium AIMS04-05-012
TN150764 A-D MC780A 80-T-34-9600 53 Contains hollospheres -
fastener lines 015 015-03 LANGELSHEIM - issue AIMS04-05-015A
Overcoating of
SEALANTS
fillets and High Chromate containing - No longer to be used; Standard:
TN150765 A-D EUROPE SAS - PR1422A - 80-T-34-9600 53 A-D
fastener lines issue WL5-5901
BEZONS - 176949
permanent joints
Issue AJ Page 85
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 85 van 114
AIRBUS
AIRBUS
A00710010
No
used
Overcoating of
SEALANTS ABS5459DL6A
fillets and AIMS04-05- IPS04-05- Not
fastener lines 012 012-09 assessed
BEZONS - 176949 PQ10010-053-05
permanent joints
Overcoating of
SEALANTS ABS5459DL6A
fastener lines 015 015-04 assessed
BEZONS - 176949 PQ10010-053-05
permanent joints
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Not AIMS04-05-015A
fastener lines 012 012-09 assessed Z16176
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Not AIMS04-05-015A
fastener lines 015 015-04 assessed Z16176
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Medium AIMS04-05-015B
fastener lines 012 012-08 issue Z16177
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Medium AIMS04-05-015B
fastener lines 015 015-05 issue Z16177
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Not AIMS04-05-012
TN150772 A-D EUROPE SAS - PR1782A 80-T-34-9600 53 Contains hollowspheres -
fastener lines 012 012-09 assessed AIMS04-05-015A
BEZONS - 176949
permanent joints
Overcoating of
SEALANTS
fillets and AIMS04-05- IPS04-05- Not AIMS04-05-012
TN150773 A-D EUROPE SAS - PR1782A 80-T-34-9600 53 Contains hollowspheres -
fastener lines 015 015-04 assessed AIMS04-05-015A
BEZONS - 176949
permanent joints
fillets and AIMS04-05- IPS04-05- GMBH - Not PQ10010-053-00
TN150774 A-F MC-238 A 53 Authorized for A380 fuel tank; Process Spec: IPDA77.01 -
fastener lines 002 002-11 LANGELSHEIM - assessed PQ10010-053-07
PPG
Overcoating of AEROSPACE -
fillets and AIMS04-05- IPS04-05- PRC-DESOTO Medium PQ10010-053-00
fastener lines 001 001-24 INTERNATIONAL Issue PQ10010-053-06
permanent joints - MOJAVE -
189173
PPG
Coating of AEROSPACE
High
TN150776 A-UK fastener lines PRC DESOTO - PR7422 - ABP4-5141 54 Chromate containing - No longer to be used A-UK
issue
medium viscosity SHILDON -
219539
PPG
High
TN150777 A-UK fastener lines PRC DESOTO - PR7422NA - ABP4-5141 54 Chromate containing - No longer to be used A-UK
issue
medium viscosity SHILDON -
219539
Coating of SEALANTS
AIMS04-05- IPS04-05- Medium REACh targeted to be withrawn - use MC780-A,
TN150778 A-UK fastener lines EUROPE SAS - PR1783 ABS5459DH6AP ABP4-5141 54 -
012 012-07 issue PR1782-A, MC780-B or PR1782-B to AIMS04-05-012
medium viscosity BEZONS - 176949
Issue AJ Page 86
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 86 van 114
AIRBUS
AIRBUS
A00710010
No
used
Coating of SEALANTS
Not
TN150779 A-E fastener lines EUROPE SAS - PR7422NA Z16122 I+D-P-062 54 - A-E
assessed
Coating of SEALANTS
TN150780 A-E fastener lines EUROPE SAS - PR1776AAS Z16156 I+D-P-062 54 Hollospheres containing - Change of catalyst A-E
002 002-05 issue
CHEMETALL
Coating of
AIMS04-05- IPS04-05- GMBH - Medium Z16176 AIMS04-
TN150781 A-E fastener lines MC780A I+D-P-062 54 - -
medium viscosity
268576
CHEMETALL
Coating of
AIMS04-05- IPS04-05- GMBH - Medium Z16176 AIMS04-
TN150782 A-E fastener lines MC780A I+D-P-062 54 - -
medium viscosity
268576
Coating of SEALANTS
TN150783 A-E fastener lines EUROPE SAS - PR1782A I+D-P-062 54 - -
012 012-09 issue 05-015A
Coating of SEALANTS
015 015-03 issue 05-015A
Coating of SEALANTS
012 012-09 assessed Z16176
Coating of SEALANTS
015 015-04 assessed Z16176
Overcoating of
SEALANTS PR1782A
TN153360 A-UK EUROPE SAS - - ABP4-5141 53 - -
fastener lines 012 012-09 Assessed
BEZONS - 176949
permanent joints
fillets and AIMS04-05- IPS04-05- GMBH - MC780A Medium
TN153361 A-UK - ABP4-5141 53 - -
Coating of SEALANTS PR1782A
TN153362 A-UK fastener lines EUROPE SAS - - ABP4-5141 54 - -
012 012-09 Assessed
Coating of SEALANTS PR1782B
TN153363 A-UK fastener lines EUROPE SAS - - ABP4-5141 54 - -
012 012-08 Assessed
CHEMETALL
Coating of MC780A
AIMS04-05- IPS04-05- GMBH - Medium
TN153364 A-UK fastener lines - ABP4-5141 54 - -
medium viscosity
268576
CHEMETALL
Coating of MC780B
AIMS04-05- IPS04-05- GMBH - Medium
TN153365 A-UK fastener lines - ABP4-5141 54 - -
medium viscosity
268576
PPG
Overcoating of DEUTSCHLAND
fillets and AIMS04-05- IPS04-05- SALES & PR-2001B Medium
fastener lines 012 012-03 SERVICES GMBH Issue
permanent joints - HAMBURG -
189164
Issue AJ Page 87
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 87 van 114
AIRBUS
AIRBUS
A00710010
No
used
PPG
DEUTSCHLAND
PR-2001B PQ10010-050-
TN153391 A-F 00PQ10010-050- IPDA77-01 50 -
09
- HAMBURG -
189164
PPG
Fillets and filling DEUTSCHLAND
PR-2001B PQ10010-052-
of cavities, AIMS04-05- IPS04-05- SALES & Medium Process Spec: IPDA77.01 New PPG repacking
TN153392 A-F 00PQ10010-052- IPDA77-01 52 -
Coating of large 001 001-24 SERVICES GMBH Issue side added
08
fasteners - HAMBURG -
189164
PPG
Overcoating of DEUTSCHLAND
PR-2001B PQ10010-053-
fillets and AIMS04-05- IPS04-05- SALES & Medium Process Spec: IPDA77.01 New PPG repacking
TN153393 A-F 00PQ10010-053- IPDA77-01 53 -
fastener lines 001 001-24 SERVICES GMBH Issue side added
06
permanent joints - HAMBURG -
189164
BASE: MC-216M
Interfay for low AIMS04-05- IPS04-05- GMBH - NAFTOSEAL MC-216M Not
TN153444 A-UK AIMS04-05-006 51
adhesion joints 006 006-08 LANGELSHEIM - B-2 HARDENER Assessed
268576
BASE: MC-216M
CHEMETALL A-2 HARDENER:
Interfay for low AIMS04-05- IPS04-05- GMBH - MC-216M A-2 Not
TN153447 A-UK AIMS04-05-006 51
adhesion joints 006 006-07 LANGELSHEIM - HARDENER Assessed
268576
4 - PRIMER (Adhesion promoter)

Adhesive 4 -
SEALANTS
PRIMER Not PQ10010-055-00
TN150787 A-F ASNA4182 EUROPE SAS - Primer:PR147 55 No longer available; Process Spec: IPDA77.01 A-F
(Adhesion assessed PQ10010-055-01
BEZONS - 176949
promoter)
Adhesive 4 -
SEALANTS
PRIMER ASNB71110- Low PQ10010-055-00
TN150788 A-F ASNB71110 EUROPE SAS - Primer:PR148AF 55 Process Spec: IPDA77.01 -
(Adhesion 01 issue PQ10010-055-02
BEZONS - 176949
promoter)
Adhesive 4 -
SEALANTS
PRIMER High PQ10010-055-00
TN150789 A-F EUROPE SAS - Primer:PR 184 55 Process Spec: IPDA77.01 -
(Adhesion issue PQ10010-055-03
BEZONS - 176949
promoter)
Adhesive 4 - CHEMETALL
PRIMER GMBH - Not PQ10010-055-00
TN150790 A-F Primer:MC110 55 Process Spec: IPDA77.01 -
(Adhesion LANGELSHEIM - assessed PQ10010-055-04
promoter) 268576
PRIMER GMBH - Not PQ10010-055-00
TN150791 A-F Primer:MC115 55 Process Spec: IPDA77.01 -
(Adhesion LANGELSHEIM - assessed PQ10010-055-05
promoter) 268576
PPG
Adhesive 4 -
AEROSPACE
PRIMER Not
TN150792 A-UK PRC DESOTO - Primer:PR146 - 55 No longer available A-UK
(Adhesion assessed
SHILDON -
promoter)
219539
Issue AJ Page 88
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 88 van 114
AIRBUS
AIRBUS
A00710010
No
used
PPG
Adhesive 4 -
AEROSPACE
PRIMER High
TN150793 A-UK PRC DESOTO - Primer:PR147 - 55 No longer available A-UK
(Adhesion issue
SHILDON -
promoter)
219539
PPG
Adhesive 4 -
AEROSPACE
PRIMER Medium
TN150794 A-UK PRC DESOTO - Primer:PR148AF - 55 In CML only A-UK
(Adhesion issue
SHILDON -
promoter)
219539
PRIMER GMBH - High
TN150795 A-UK Primer:MC115 - ABP4-5142 55 - A-UK
(Adhesion LANGELSHEIM - issue
promoter) 268576
PRIMER GMBH - Not
TN150796 A-UK Primer:MC145 - 55 No longer available A-UK
(Adhesion LANGELSHEIM - assessed
promoter) 268576
PRIMER GMBH - High MC 110 not qualified alone but in conjunction with some
TN150797 A-UK Primer:MC110 - ABP4-5142 55 -
(Adhesion LANGELSHEIM - issue sealants, See ref 1, 5, 8, 140
promoter) 268576
PRIMER GMBH - Not
TN150798 A-UK Primer:MC120 - 55 Disqualified A-UK
promoter) 268576
Adhesive 4 -
PRIMER Not
TN150799 A-UK _to_be_defined Primer:BONDAID16 - ABP4-5142 55 Disqualified A-UK
(Adhesion assessed
promoter)
PPG
Adhesive 4 -
AEROSPACE
PRIMER High
TN150800 A-UK PRC DESOTO - Primer:PR 184 - ABP4-5142 55 - -
(Adhesion issue
SHILDON -
promoter)
219539
PPG
Adhesive 4 -
AEROSPACE
PRIMER High
TN150801 A-UK PRC DESOTO - Primer:PR187 - ABP4-5141 55 For use with PR 1228 B only -
(Adhesion issue
SHILDON -
promoter)
219539
PRIMER GMBH - High
TN150802 A-UK Primer:MC115 - ABP4-5142 55 - -
promoter) 268576
Adhesive 4 -
SEALANTS
PRIMER ASNB71110- Low
TN150803 A-E EUROPE SAS - Primer:PR148AF Z16902 I+D-P-062 55 - -
(Adhesion 01 issue
BEZONS - 176949
promoter)
Adhesive 4 -
SEALANTS
PRIMER High
TN150804 A-E EUROPE SAS - Primer:PR 184 Z16912 I+D-P-062 55 Standard: ASNB71110-02 -
(Adhesion issue
BEZONS - 176949
promoter)
PRIMER GMBH - High
TN150805 A-E Primer:MC115 Z16914 I+D-P-146 55 Process Spec: I+D-P-062 -
promoter) 268576
Issue AJ Page 89
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 89 van 114
AIRBUS
AIRBUS
A00710010
No
used
Adhesive 4 -
SEALANTS
PRIMER Low
TN150806 A-D EUROPE SAS - Primer:PR148AF - 80-T-34-9600 55 - -
(Adhesion issue
BEZONS - 176949
promoter)
Adhesive 4 -
SEALANTS
PRIMER Not
TN150807 A-D EUROPE SAS - Primer:PR148AF - 80-T-34-9600 55 Withdrawn A-D
(Adhesion assessed
BEZONS - 176949
promoter)
Adhesive 4 -
SEALANTS
PRIMER Medium
TN150808 A-D EUROPE SAS - Primer:PR149 - 80-T-34-9600 55 - -
(Adhesion issue
BEZONS - 176949
promoter)
PRIMER GMBH - Not
TN150809 A-D Primer:MC145 - 80-T-34-9600 55 Withdrawn A-D
promoter) 268576
PRIMER GMBH - High
TN150810 A-D Primer:MC115 - 80-T-34-9600 55 - -
promoter) 268576
PRIMER GMBH - High MC 110 not qualified alone but in conjunction with some
TN150811 A-D Primer:MC110 - 80-T-34-9600 55 -
(Adhesion LANGELSHEIM - issue sealants, See ref 1, 5, 8, 140
promoter) 268576
Adhesive 4 -
SEALANTS
PRIMER Not high solvent non updated; IPS: TH5.939/7; Process
TN150812 F EUROPE SAS - Primer:PR147 PQ10010-055-00 55 -
(Adhesion assessed Spec: TH6.6548
BEZONS - 176949
promoter)
Adhesive 4 -
SEALANTS
PRIMER High
TN150813 SON EUROPE SAS - Primer:PR186 - 55 Process Spec: PS6.5218 -
(Adhesion issue
BEZONS - 176949
promoter)
5 - SILICONE SEALANTS FOR HIGH TEMPERATURE APPLICATIONS
BLUESTAR
SILICONES CAF4
One part silicone Primer:MB High PQ10010-100-00 Primer MB no longer available; Process Spec:
TN150814 A-F ASNA4183 FRANCE SAS - 100 A-F
fillets issue PQ10010-100-01 IPDA77.01
LYON CEDEX 03
- 191991
BLUESTAR
SILICONES CAF4Thixo
One part silicone Primer:MB Not PQ10010-100-00
TN150815 A-F ASNA4183 FRANCE SAS - 100 Primer MB no longer available; Process Spec: IFTO508 A-F
fillets assessed PQ10010-100-02
LYON CEDEX 03
- 191991
BLUESTAR
SILICONES CAF33
One part silicone Primer:MB Medium PQ10010-100-00 Primer MB no longer available; Process Spec:
TN150816 A-F ASNA4152 FRANCE SAS - 100 A-F
fillets issue PQ10010-100-03 IPDA77.01
LYON CEDEX 03
- 191991
DOW CORNING DOW CORNING RTV
GMBH DIV. 3145
One part silicone Medium PQ10010-100-00
TN150817 A-F MOLYKOTE - Primer:1204 100 - -
fillets issue PQ10010-100-04
WIESBADEN -
153694
PQ10010-100-00
One part silicone AIMS04-05- IPS04-05- D AIRCRAFT Medium Maximum continous temperature use: 150°; Process
TN150818 A-F DAPCO2100 PQ10010-100-05 100 A-F
fillets 003 003-01 PRODUCTS INC - issue Spec: IPDA77.01
ABS5460AH6M
Issue AJ Page 90
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 90 van 114
AIRBUS
AIRBUS
A00710010
No
used
ANAHEIM -
135941
BLUESTAR CAF 4
SeperateByANDPrimer: ABS5460B*
SILICONES Maximum continous temperature use: 200°; Process
One part silicone AIMS04-05- IPS04-05- RHODORSIL PRIMER HIGH AIMS04-05-003
TN150819 A-F FRANCE SAS - 100 Spec: IPDA77.01; RHODORSIL PRIMER PM 820 -
fillets 003 003-03 PM 820 ISSUE PQ10010-100-00
SAINT-FONS qualified in Lubeck site, ARP ID 308807 (TN153236)
PQ10010-100-06
CEDEX - 245158
BLUESTAR CAF 33
SeperateByANDPrimer: ABS5460C*
One part silicone AIMS04-05- IPS04-05- RHODORSIL PRIMER Not AIMS04-05-003
TN150820 A-F FRANCE SAS - 100 Spec: IPDA77.01; RHODORSIL PRIMER PM 820 -
fillets 003 003-04 PM 820 Assessed PQ10010-100-00
PQ10010-100-07
CEDEX - 245158
DOW CORNING
GMBH DIV. RTV732
One part silicone Primer:1200 Medium
TN150821 A-UK MOLYKOTE - - ABP4-5143 100 - -
fillets issue
WIESBADEN -
153694
DOW CORNING
GMBH DIV. RTV738
One part silicone Primer:1204 Low
TN150822 A-UK MOLYKOTE - - ABP4-5143 100 - -
fillets issue
WIESBADEN -
153694
GMBH DIV. 3145
One part silicone Medium
TN150823 A-UK MOLYKOTE - Primer:1204 - ABP4-5143 100 - -
fillets issue
WIESBADEN -
153694
AMBERSIL LTD - SILCOSET
One part silicone DANESHILL Primer:152RTV Medium
TN150824 A-UK - ABP4-5143 100 - -
fillets BASINGSTONE - issue
137154
BLUESTAR
SILICONES CAF4
One part silicone Primer:MB High Primer MB no longer available; Standard: MIL-A-46106
TN150825 A-E FRANCE SAS - Z16312 Z15903 100 A-E
fillets issue Group 1; Process Spec: I+P-D-146
LYON CEDEX 03
- 191991
BLUESTAR CAF 4
SeperateByANDPrimer:
SILICONES ABS5460B*
One part silicone AIMS04-05- IPS04-05- RHODORSIL PRIMER HIGH Process Spec: I+P-D-146; RHODORSIL PRIMER PM
TN150826 A-E FRANCE SAS - AIMS04-05-003 100 -
fillets 003 003-03 PM 820 ISSUE 820 qualified in Lubeck site, ARP ID 308807 (TN153237)
SAINT-FONS Z16312
CEDEX - 245158
DOW CORNING
GMBH DIV. RTV732
One part silicone Primer:1200 Medium Standard: MIL-A-46106 Group 1; Process Spec: I+P-D-
TN150827 A-E MOLYKOTE - Z16302 Z15904 100 A-E
fillets issue 146
WIESBADEN -
153694
MOMENTIVE
PERFORMANCE RTV102 Old manufacturer General Electric is now MOMENTIVE
One part silicone Primer:SS4004 Medium
TN150828 A-E MATERIALS INC - Z16302 Z15904 100 PERF. MAT.; Standard: MIL-A-46106 Group 1; Process -
fillets issue
WATERFORD - Spec: I+P-D-146
285960
Issue AJ Page 91
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 91 van 114
AIRBUS
AIRBUS
A00710010
No
used
MOMENTIVE
One part silicone Primer:SS4004 Medium
fillets issue
285960
GMBH DIV. 3145
One part silicone Medium Standard: MIL-A-46146 Group 2; Process Spec: I+P-D-
TN150830 A-E MOLYKOTE - Primer:1200 Z16310 Z15904 100 -
fillets issue 146
WIESBADEN -
153694
MOMENTIVE
One part silicone Primer:SS4004 Not
fillets assessed
285960
BLUESTAR
SILICONES CAF4
One part silicone Primer:MB High
TN150832 A-D FRANCE SAS - DA4-653-3S1 80-T-34-9604 100 Primer MB no longer available; Standard: DA4-653-3S1 A-D
fillets issue
LYON CEDEX 03
- 191991
DOW CORNING
GMBH DIV.
One part silicone Not
TN150833 A-D MOLYKOTE - Primer:1200 or RTV731 - 100 withdrawn A-D
fillets assessed
WIESBADEN -
153694
DOW CORNING
GMBH DIV. RTV732
TN150834 A-D MOLYKOTE - DA4-653-3S2 80-T-34-9604 100 Standard: DA4-653-3S2 -
fillets issue
WIESBADEN -
153694
RTV157
One part silicone Primer:S4004 Medium
TN150835 SON _to_be_defined - 100 Process Spec: PS6.7539 -
fillets issue
BLUESTAR
SILICONES CAF4
One part silicone Primer:MB High
TN150836 SON FRANCE SAS - - 100 Primer MB no longer available; Process Spec: PS6.7539 -
fillets issue
LYON CEDEX 03
- 191991
DOW CORNING
GMBH DIV. RTV732
TN150837 SON MOLYKOTE - - 100 Process Spec: PS6.7539 SON
fillets issue
WIESBADEN -
153694
SEALANTS PR1910
Two part silicone Primer:1903M Medium PQ10010-101-00 Primer 1903M no longer available; Process Spec:
interfay issue PQ10010-101-01 IPDA77.01
BEZONS - 176949
SEALANTS PR1910
Two part silicone Primer:1903M Medium PQ10010-101-00 Primer 1903M no longer available; Process Spec:
interfay issue PQ10010-101-01 IPDA77.01
BEZONS - 176949
D AIRCRAFT
PQ10010-101-00
Two part silicone AIMS04-05- IPS04-05- PRODUCTS INC - Medium
TN150840 A-F DAPCO2100 PQ10010-101-02 101 One part premixed; Process Spec: IPDA77.01 A-F
interfay 003 003-01 ANAHEIM - issue
ABS5460AH6M
135941
Issue AJ Page 92
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 92 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS PR1910
Two part silicone Primer:JFP7010 Medium PQ10010-101-00
TN150841 A-F ASNA4180 EUROPE SAS - 101 Process Spec: IPDA77.01 -
interfay issue PQ10010-101-03
BEZONS - 176949
SEALANTS PR1910
Two part silicone Primer:JFP7010 Medium PQ10010-101-00
TN150842 A-F ASNA4186 EUROPE SAS - 101 Process Spec: IPDA77.01 -
interfay issue PQ10010-101-03
BEZONS - 176949
AMBERSIL LTD -
Two part silicone DANESHILL Medium
TN150843 A-UK SILCOSET101 - ABP4-5143 101 No longer available -
interfay BASINGSTONE - issue
137154
SEALANTS PR1910
Two part silicone Primer:1902 Medium
TN150844 A-E EUROPE SAS - Z16301 Z16309 101 Process Spec: I+P-D-146 A-E
interfay issue
BEZONS - 176949
SEALANTS PR1910
Two part silicone Primer:1903M Medium Primer 1903M no longer available; Process Spec:
TN150845 F TH5.945 EUROPE SAS - PQ10010-101-00 101 F
interfay issue TH6.6429
BEZONS - 176949
SEALANTS PR1910
Two part silicone Primer:1903M Medium Primer 1903M no longer available; IPS: TH5.939/9;
TN150846 F EUROPE SAS - PQ10010-101-00 101 F
interfay issue Process Spec: TH6.6429
BEZONS - 176949
SEALANTS PR1910
Two part silicone Primer:1903M Medium Primer 1903M no longer available; Standard: SMS0901;
TN150847 SON EUROPE SAS - - 101 SON
interfay issue Process Spec: QCI 3.26.06
BEZONS - 176949
BLUESTAR
SILICONES
High PQ10010-103-00
TN150848 A-F Filling of cavities ASNA4183 FRANCE SAS - CAF4 103 Process Spec: IPDA77.01 A-F
issue PQ10010-103-01
LYON CEDEX 03
- 191991
Not PQ10010-103-00
TN150849 A-F Filling of cavities ASNA4183 _to_be_defined RTV188 103 No longer available A-F
BLUESTAR
SILICONES CAF4Thixo
Primer:MB Not PQ10010-103-00
TN150850 A-F Filling of cavities FRANCE SAS - 103 Primer MB no longer available A-F
LYON CEDEX 03
- 191991
BLUESTAR
SILICONES CAF33
Primer:MB Medium PQ10010-103-00
TN150851 A-F Filling of cavities ASNA4152 FRANCE SAS - 103 Primer MB no longer available A-F
issue PQ10010-103-04
LYON CEDEX 03
- 191991
D AIRCRAFT
PQ10010-103-00
AIMS04-05- IPS04-05- PRODUCTS INC - Medium Maximum continous temperature use: 150°; Process
TN150852 A-F Filling of cavities DAPCO2100 PQ10010-103-05 103 A-F
003 003-01 ANAHEIM - issue Spec: IPDA77.01
ABS5460AH6M
135941
CAF 4
BLUESTAR
AIMS04-05- IPS04-05- RHODORSIL PRIMER HIGH AIMS04-05-003
TN150853 A-F Filling of cavities FRANCE SAS - 103 Spec: IPDA77.01; RHODORSIL PRIMER PM 820 -
003 003-03 PM 820 ISSUE PQ10010-103-00
PQ10010-103-06
CEDEX - 245158
Issue AJ Page 93
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 93 van 114
AIRBUS
AIRBUS
A00710010
No
used
CAF 33
BLUESTAR
AIMS04-05- IPS04-05- RHODORSIL PRIMER Not AIMS04-05-003
TN150854 A-F Filling of cavities FRANCE SAS - 103 Spec: IPDA77.01; RHODORSIL PRIMER PM 820 -
003 003-04 PM 820 Assessed PQ10010-103-00
PQ10010-103-07
CEDEX - 245158
DOW CORNING
GMBH DIV.
Medium
TN150855 A-UK Filling of cavities MOLYKOTE - RTV732 - ABP4-5143 103 Standard: AFS1127 -
issue
WIESBADEN -
153694
AMBERSIL LTD -
DANESHILL Medium
TN150856 A-UK Filling of cavities SILCOSET152 - 103 Standard: AFS1234 -
BASINGSTONE - issue
137154
BLUESTAR
SILICONES CAF4
Primer:MB High Primer MB no longer available; Standard: MIL-A-46106
TN150857 A-E Filling of cavities FRANCE SAS - Z15903 103 A-E
issue Group 1; Process Spec: I+P-D-146
LYON CEDEX 03
- 191991
BLUESTAR CAF 4
SILICONES SeperateByANDPrimer: ABS5460B*
AIMS04-05- IPS04-05- RHODORSIL PRIMER HIGH Process Spec: I+P-D-146; RHODORSIL PRIMER PM
TN150858 A-E Filling of cavities FRANCE SAS - AIMS04-05-003 103 -
003 003-03 PM 820 ISSUE 820 qualified in Lubeck site, ARP ID 308807 (TN153239)
SAINT-FONS Z16312
CEDEX - 245158
DOW CORNING
GMBH DIV. RTV732
Primer:1200 Medium Standard: MIL-A-46106 Group 1; Process Spec: I+P-D-
TN150859 A-E Filling of cavities MOLYKOTE - Z16302 Z15904 103 -
issue 146
WIESBADEN -
153694
BLUESTAR
SILICONES CAF4
Primer:MB High DA4-653-3S1
TN150860 A-D Filling of cavities FRANCE SAS - 80-T-34-9604 103 withdrawn; Standard: DA4-653-3S1 A-D
issue AIMS04-05-003
LYON CEDEX 03
- 191991
DOW CORNING
GMBH DIV. RTV731
Primer:1200 Not
TN150861 A-D Filling of cavities MOLYKOTE - DA4-653-3S2 80-T-34-9604 103 withdrawn; Standard: DA4-653-3S2 A-D
assessed
WIESBADEN -
153694
DOW CORNING
GMBH DIV. RTV732
Primer:1200 Medium
TN150862 A-D Filling of cavities MOLYKOTE - DA4-653-3S2 80-T-34-9604 103 Standard: DA4-653-3S2 -
issue
WIESBADEN -
153694
DOW CORNING
SILASTIC
GMBH DIV.
504RTV Not
TN150863 A-UK Overcoating MOLYKOTE - DA4-653-3S2 ABP4-5143 104 - -
assessed
WIESBADEN -
153694
BLUESTAR
RHODORSIL
SILICONES
Two part silicone RTV1512 Not PQ10010-105-00
TN150864 A-F FRANCE SAS - 105 No longer available; Process Spec: IFTO715 A-F
interfay assessed PQ10010-105-01
LYON CEDEX 03
- 191991
Issue AJ Page 94
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 94 van 114
AIRBUS
AIRISUS
A00710010
No
used
BLUESTAR
RHODORSIL
SILICONES
Two part silicone RTV1502 Not PQ10010-105-00
TN150865 A-F FRANCE SAS - 105 Process Spec: IFTO715 -
interfay assessed PQ10010-105-02
LYON CEDEX 03
- 191991
BLUESTAR
RHODORSIL
SILICONES
Two part silicone RTV3428 Not PQ10010-105-00 Reference change of product RTV 1556 by RTV 3428;
TN150866 A-F FRANCE SAS - 105 -
interfay assessed PQ10010-105-03 Process Spec: IFTO715
LYON CEDEX 03
- 191991
CAF 4
BLUESTAR
SILICONES
One part silicone AIMS04-05- IPS04-05- RHODORSIL PRIMER Not AIMS04-05-003 Maximum continous temperature use: 200°; CAF 4
TN153236 A-D GERMANY GMBH IPDA77-01 100
filets 003 003-03 PM 820 Assessed PQ10010-100-00 qualified on Saint Fons site, ARP ID 245158 (TN150819)
- LUEBECK -
PQ10010-100-06
308807
BLUESTAR CAF 4
SeperateByANDPrimer:
SILICONES ABS5460B*
One part silicone AIMS04-05- IPS04-05- RHODORSIL PRIMER Not CAF 4 qualified on Saint Fons site, ARP ID 245158
TN153237 A-D GERMANY GMBH AIMS04-05-003 I+D-P-146 100
filets 003 003-03 PM 820 Assessed (TN150826)
- LUEBECK - Z16312
308807
BLUESTAR CAF 4
SILICONES
AIMS04-05- IPS04-05- RHODORSIL PRIMER Not AIMS04-05-003 Maximum continous temperature use: 200°C; CAF 4
TN153238 A-D Filling of cavities GERMANY GMBH IPDA77-01 103
003 003-03 PM 820 Assessed PQ10010-103-00 qualified on Saint Fons site, ARP ID 245158 (TN150853)
- LUEBECK -
PQ10010-103-06
308807
CAF 4
BLUESTAR
SILICONES SeperateByANDPrimer: ABS5460B*
AIMS04-05- IPS04-05- RHODORSIL PRIMER Not CAF 4 qualified on Saint Fons site, ARP ID 245158
TN153239 A-D Filling of cavities GERMANY GMBH AIMS04-05-003 I+D-P-146 103
003 003-03 PM 820 Assessed (TN150858)
- LUEBECK - Z16312
308807
BLUESTAR CAF 33
SILICONES
One part silicone AIMS04-05- IPS04-05- RHODORSIL PRIMER Not AIMS04-05-003 Maximum continous temperature use: 250°C; CAF 33
TN153240 A-D GERMANY GMBH IPDA77-01 100
filets 003 003-04 PM 820 Assessed PQ10010-100-00 qualified on Saint Fons site, ARP ID 245158 (TN150820)
- LUEBECK -
PQ10010-100-07
308807
BLUESTAR CAF 33
SILICONES
AIMS04-05- IPS04-05- RHODORSIL PRIMER Not AIMS04-05-003 Maximum continous temperature use: 250°C; CAF 33
TN153241 A-D Filling of cavities GERMANY GMBH IPDA77-01 103
003 003-04 PM 820 Assessed PQ10010-103-00 qualified on Saint Fons site, ARP ID 245158 (TN150854)
- LUEBECK -
PQ10010-103-07
308807
6 - SEALANT FOR WET ASSEMBLY OF FASTENERS
ABS5419AH0A
Permanent SEALANTS
AIMS04-05- IPS04-05- High PQ10010-140-02
TN150868 A-F fasteners.General EUROPE SAS - PR1422A NA 140 T < 80°; Process Spec: IPDA77.01 A-F
001 001-01 issue PQ10010-140-00
case BEZONS - 176949
ABS5459AH0A
ABS5419AH0A
Permanent SEALANTS
High PQ10010-140-02
TN150869 A-F fasteners.General ASNB71151 ASNA4163 EUROPE SAS - PR1422A NA 140 T < 80°; Process Spec: IPDA77.01 A-F
issue PQ10010-140-00
ABS5459AH0A
Issue AJ Page 95
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 95 van 114
AIRBUS
AIRBUS
A00710010
No
used
ABS5419AH0A
Permanent SEALANTS
AIMS04-05- IPS04-05- High PQ10010-140-02
TN150870 A-F fasteners.General EUROPE SAS - PR1422A NA 140 T < 80°; Process Spec: IPDA77.01 A-F
002 002-03 issue PQ10010-140-00
ABS5459AH0A
Permanent SEALANTS
High PQ10010-140-00 T < 80°; Standard: MIL-S-8802 CA; Process Spec:
TN150871 A-F fasteners.General ASNA4172 EUROPE SAS - PR1431G Type I 140 A-F
issue PQ10010-140-03 IPDA77.01
PQ10010-140-00
Permanent SEALANTS
AIMS04-05- IPS04-05- High PQ10010-140-04 T < 80° - Hollospheres containing - Change of catalyst;
TN150872 A-F fasteners.General EUROPE SAS - PR1776A AS 140 A-F
001 001-05 issue ABS5419AM7A Process Spec: IPDA77.01
ABS5459AM7A
PQ10010-140-00
Permanent SEALANTS
High PQ10010-140-04 T < 80° - Hollospheres containing - Change of catalyst;
TN150873 A-F fasteners.General ASNB71070 ASNA4157 EUROPE SAS - PR1776A AS 140 A-F
issue ABS5419AM7A Process Spec: IPDA77.01
ABS5459AM7A
PQ10010-140-00
Permanent SEALANTS
AIMS04-05- IPS04-05- High PQ10010-140-04 T < 80° - Hollospheres containing - Change of catalyst;
TN150874 A-F fasteners.General EUROPE SAS - PR1776A AS 140 A-F
002 002-05 issue ABS5419AM7A Process Spec: IPDA77.01
ABS5459AM7A
Permanent SEALANTS PQ10010-140-00
AIMS04-05- IPS04-05- Medium T < 80° - Change of catalyst; Process Spec:
TN150875 A-F fasteners.General EUROPE SAS - PS892C PQ10010-140-05 140 A-F
002 002-09 issue IPDA77.01
case BEZONS - 176949 ABS5459AH7C
Permanent SEALANTS PQ10010-140-00
AIMS04-05- IPS04-05- Medium T < 80° - Change of catalyst; Process Spec:
TN150876 A-F fasteners.General EUROPE SAS - PS892C PQ10010-140-05 140 A-F
001 001-16 issue IPDA77.01
case BEZONS - 176949 ABS5459AH7C
CHEMETALL MC780C
Permanent PQ10010-140-00
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium T < 80° - Refer to Process specification for Primer use;
TN150877 A-F fasteners.General PQ10010-140-06 140 -
001 001-21 LANGELSHEIM - issue Process Spec: IPDA77.01
case ABS5419AM0C
268576
CHEMETALL MC780C
case ABS5419AM0C
268576
CHEMETALL MC780C
case ABS5419AM0C
268576
CHEMETALL MC780C
case ABS5419AM0C
268576
Permanent SEALANTS ABS5419AM0C
TN150881 A-F fasteners.General EUROPE SAS - PR1782C PQ10010-140-07 140 T < 80°; Process Spec: IPDA77.01 -
001 001-30 Assessed
case BEZONS - 176949 PQ10010-140-00
012 012-10 Assessed
case BEZONS - 176949 PQ10010-140-00
014 014-06 Assessed
case BEZONS - 176949 PQ10010-140-00
015 015-06 Assessed
case BEZONS - 176949 PQ10010-140-00
Issue AJ Page 96
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 96 van 114
AIRBUS
AIRBUS
A00710010
No
used
CHEMETALL MC780C AIMS04-05-001
Permanent
AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium AIMS04-05-012
TN150885 A-D fasteners.General 80-T-34-9600 140 T < 80° - Refer to Process specification for Primer use -
001 001-21 LANGELSHEIM - issue AIMS04-05-014C
case
268576 AIMS04-05-015C
Permanent
case
268576 AIMS04-05-015C
Permanent
case
268576 AIMS04-05-015C
Permanent
case
268576 AIMS04-05-015C
AIMS04-05-001
Permanent SEALANTS
AIMS04-05- IPS04-05- Not AIMS04-05-012
TN150889 A-D fasteners.General EUROPE SAS - PR1782C 80-T-34-9600 140 T < 80° -
001 001-30 Assessed AIMS04-05-014C
AIMS04-05-015C
AIMS04-05-001
Permanent SEALANTS
AIMS04-05- IPS04-05- Not AIMS04-05-012
012 012-10 Assessed AIMS04-05-014C
AIMS04-05-015C
AIMS04-05-001
Permanent SEALANTS
AIMS04-05- IPS04-05- Not AIMS04-05-012
014 014-06 Assessed AIMS04-05-014C
AIMS04-05-015C
AIMS04-05-001
Permanent SEALANTS
AIMS04-05- IPS04-05- Not AIMS04-05-012
015 015-06 Assessed AIMS04-05-014C
AIMS04-05-015C
PS892
Permanent SEALANTS C12 or C3 or C48 or C2
AIMS04-05- IPS04-05- Medium T < 80ºC - No longer to be used - change of
TN150893 A-D fasteners.General EUROPE SAS - or C70 - 80-T-34-9600 140 A-D
001 001-16 issue catalyst; Process Spec: 80-T-4-5803
PS892
Permanent SEALANTS C12 or C3 or C48 or C2
IPS01-04- Medium T < 80ºC - No longer to be used - change of
TN150894 A-D fasteners.General DAN1184 EUROPE SAS - or C70 - 80-T-34-9600 140 A-D
007-01 issue catalyst; Process Spec: 80–T–34–5803
T < 80° - The product shall not be used on

CHEMETALL MC630C
Permanent titanium and steel without adhesion promoter MC110;
GMBH - Primer:MC110 Medium AIMS04-05-
TN150895 A-D fasteners.General DAN1184 - 80-T-34-9600 140 Process Spec: 80??4?803REACh targeted to be -
LANGELSHEIM - issue 001DAN1184
case withrawn - use MC780 C or PR1782 C to AIMS04-05-
268576
001
T < 80° - The product shall not be used on
CHEMETALL MC630C
Permanent titanium and steel without adhesion promoter MC110;
AIMS04-05- IPS04-05- GMBH - Primer:MC110 Medium AIMS04-05-
TN150896 A-D fasteners.General 80-T-34-9600 140 Process Spec: 80–T–34–5803REACh targeted to -
001 001-12 LANGELSHEIM - issue 001DAN1184
case be withrawn - use MC780 C or PR1782 C to AIMS04-05-
268576
001
Permanent PPG
High
TN150897 A-UK fasteners.General AEROSPACE PR1422ANA - ABP4-5141 140 T < 80° - Chromate containing - No longer to be used A-UK
issue
case PRC DESOTO -
Issue AJ Page 97
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 97 van 114
AIRBUS
AIRBUS
A00710010
No
used
SHILDON -
219539
PPG
PR1422
Permanent AEROSPACE
A or B High
TN150898 A-UK fasteners.General PRC DESOTO - - ABP4-5141 140 T < 80° - Chromate containing - No longer to be used A-UK
issue
case SHILDON -
219539
PPG
PR1431
Permanent AEROSPACE
Type II or Type I High
TN150899 A-UK fasteners.General PRC DESOTO - - ABP4-5141 140 T < 80° - Chromate containing - No longer to be used A-UK
issue
case SHILDON -
219539
CHEMETALL
Permanent AIMS04-05-001
AIMS04-05- IPS04-05- GMBH - Not
TN150900 A-UK fasteners.General MC-238 A AIMS04-05-002 ABP4-5141 140 T < 80° -
case ABS5459AH0M
268576
CHEMETALL
case ABS5459AH0M
268576
CHEMETALL
case ABS5459AH0M
268576
CHEMETALL
Permanent
TN150903 A-UK fasteners.General MC-238 B ABS5459AH0M ABP4-5141 140 T < 80° -
case
268576
CHEMETALL
Permanent
TN150904 A-UK fasteners.General MC-238 B ABS5459AH0M ABP4-5141 140 T < 80° -
case
268576
Permanent SEALANTS
AIMS04-05- IPS04-05- Medium T < 80°REACh targeted to be withrawn - use MC780-C
TN150905 A-UK fasteners.General EUROPE SAS - PR1783 ABS5459DH6M ABP4-5141 140 -
001 001-26 issue or PR1782-C to AIMS04-05-001
Permanent SEALANTS
AIMS04-05- IPS04-05- Medium T < 80°REACh targeted to be withrawn - use MC780-C
TN150906 A-UK fasteners.General EUROPE SAS - PR1783 ABS5459DH6M ABP4-5141 140 -
012 012-07 issue or PR1782-C to AIMS04-05-012
CHEMETALL MC780C
Permanent
TN150907 A-UK fasteners.General - ABP4-5142 140 T < 80° - Refer to Process specification for Primer use -
case
268576
CHEMETALL MC780C
Permanent
TN150908 A-UK fasteners.General - ABP4-5142 140 T < 80° - Refer to Process specification for Primer use -
case
268576
Permanent SEALANTS
TN150909 A-UK fasteners.General EUROPE SAS - PR1782C - 140 T < 80°; Process Spec: ABP4-51142 -
012 012-10 Assessed
Permanent SEALANTS
TN150910 A-UK fasteners.General EUROPE SAS - PR1782C - 140 T < 80°; Process Spec: ABP4-51142 -
001 001-30 Assessed
Permanent PPG
TN150911 A-UK fasteners.General AEROSPACE - PR-2001B - ABP4-5141 140 T < 80° -
001 001-24 Issue
case PRC-DESOTO
Issue AJ Page 98
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 98 van 114
AIRBUS
AIRBUS
A00710010
No
used
INTERNATIONAL
- MOJAVE -
189173
PPG
AEROSPACE -
Permanent
AIMS04-05- IPS04-05- PRC-DESOTO Medium
TN150912 A-UK fasteners.General PR-2001B - ABP4-5141 140 T < 80° -
012 012-03 INTERNATIONAL Issue
case
- MOJAVE -
189173
PPG
Permanent AEROSPACE
TN150913 A-UK fasteners.General PRC DESOTO - PR1770C - ABP4-5141 140 T < 80° - Change of catalyst A-UK
001 001-22 issue
case SHILDON -
219539
PPG
Permanent AEROSPACE
TN150914 A-UK fasteners.General PRC DESOTO - PR1770C - ABP4-5141 140 T < 80° - Change of catalyst A-UK
012 012-01 issue
case SHILDON -
219539
Permanent SEALANTS
TN150915 A-E fasteners.General EUROPE SAS - PR1422ANA Z16104 140 T < 80°; Process Spec: I+P-D-146 A-E
001 001-01 issue
Permanent SEALANTS
TN150916 A-E fasteners.General EUROPE SAS - PR1422ANA Z16104 140 T < 80°; Process Spec: I+P-D-146 A-E
002 002-03 issue
Permanent SEALANTS
TN150917 A-E fasteners.General EUROPE SAS - PR1776AAS Z16156 I+D-P-062 140 T < 80° - Hollospheres containing - Change of catalyst A-E
001 001-05 issue
Permanent SEALANTS
TN150918 A-E fasteners.General EUROPE SAS - PR1776AAS Z16156 I+D-P-062 140 T < 80° - Hollospheres containing - Change of catalyst A-E
002 002-05 issue
CHEMETALL MC780C
Permanent AIMS04-05-014C
TN150919 A-E fasteners.General AIMS04-05-015C I+D-P-062 140 T < 80° - Refer to Process specification for Primer use -
case Z16171
268576
CHEMETALL MC780C
case Z16171
268576
CHEMETALL MC780C
case Z16171
268576
CHEMETALL MC780C
case Z16171
268576
Permanent SEALANTS AIMS04-05-014C
TN150923 A-E fasteners.General EUROPE SAS - PR1782C AIMS04-05-015C I+D-P-062 140 T < 80° -
001 001-30 Assessed
case BEZONS - 176949 Z16171
012 012-10 Assessed
Issue AJ Page 99
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 99 van 114
AIRBUS
AIRBUS
A00710010
No
used
014 014-06 Assessed
015 015-06 Assessed
Permanent SEALANTS
Medium T < 80?; Process Spec: PS6.5218;Standard: SAE-
TN150927 SON fasteners.General EUROPE SAS - PR1828 B - 140 -
issue AMS-3277
Permanent SEALANTS
Medium
TN150928 SON fasteners.General DAN1184 EUROPE SAS - PS892C DAN1184 140 T < 80°; Process Spec: PS6.5219 -
issue
Permanent ABS5419AM0C
TN150929 A-F fasteners.General _to_be_defined PR1782C PQ10010-140-00 140 T < 80°; Process Spec: IPDA77.01 -
001 001-30 Assessed
case PQ10010-140-07
012 012-10 Assessed
case PQ10010-140-07
014 014-06 Assessed
case PQ10010-140-07
015 015-06 Assessed
case PQ10010-140-07
AIMS04-05-001
Permanent
AIMS04-05- IPS04-05- Not AIMS04-05-012
TN150933 A-D fasteners.General _to_be_defined PR1782C 80-T-34-9600 140 T < 80° -
001 001-30 Assessed AIMS04-05-014C
case
AIMS04-05-015C
AIMS04-05-001
Permanent
AIMS04-05- IPS04-05- Not AIMS04-05-012
012 012-10 Assessed AIMS04-05-014C
case
AIMS04-05-015C
AIMS04-05-001
Permanent
AIMS04-05- IPS04-05- Not AIMS04-05-012
014 014-06 Assessed AIMS04-05-014C
case
AIMS04-05-015C
AIMS04-05-001
Permanent
AIMS04-05- IPS04-05- Not AIMS04-05-012
015 015-06 Assessed AIMS04-05-014C
case
AIMS04-05-015C
PPG
Permanent AEROSPACE
TN150937 A-UK fasteners.General PRC DESOTO - PR1782C AIMS04-05-001 140 T < 80°; Process Spec: ABP4-51142 -
001 001-30 Assessed
case SHILDON -
219539
PPG
Permanent AEROSPACE
012 012-10 Assessed
case SHILDON -
219539
PPG
Permanent AEROSPACE
014 014-06 Assessed
case SHILDON -
219539
Issue AJ Page 100

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 100 van 114
AIRBUS
AIRBUS
A00710010
No
used
PPG
Permanent AEROSPACE
015 015-06 Assessed
case SHILDON -
219539
TN150941 A-E fasteners.General _to_be_defined PR1782C AIMS04-05-015C I+D-P-062 140 T < 80° -
001 001-30 Assessed
case Z16171
012 012-10 Assessed
case Z16171
014 014-06 Assessed
case Z16171
015 015-06 Assessed
case Z16171
PPG
AEROSPACE -
Permanent
TN150945 A-F fasteners.General PR-2001B 140 Process Spec: IPDA77.01 -
case
- MOJAVE -
189173
PPG COATINGS
Removable Not PQ10010-141-00 T < 120° - Chromate containing - No longer to be used;
TN150946 A-F ASNA4188 SA - HARFLEUR - MASTINOX6856K 141 A-F
fasteners Assessed PQ10010-141-01 Process Spec: IPDA77.01
240992
PPG COATINGS
Removable LAB1692 or MASTINOX Not PQ10010-141-00 T < 120° - Chromate containing - No longer to be used;
TN150947 A-F ASNA4191 SA - HARFLEUR - 141 A-F
fasteners 1915/3600 Assessed PQ10010-141-02 Process Spec: IPDA77.01
240992
PPG COATINGS
Removable High PQ10010-141-00 T < 120° - Chromate containing - No longer to be used;
TN150948 A-F ASNA4191 SA - HARFLEUR - MASTINOX6856H 141 A-F
fasteners issue PQ10010-141-03 Process Spec: IPDA77.01
240992
PPG
AEROSPACE
Removable Medium T < 120° - Chromate containing - Non Cr product to be
TN150949 A-UK PRC DESOTO - JC-5A - ABP4-5144 141 -
fasteners issue used
SHILDON -
219539
PPG
AEROSPACE
Removable Not
TN150950 A-UK PRC DESOTO - CELLOSEEL - 141 T < 120° - Disqualified; Process Spec: ABP4-5145 -
fasteners Assessed
SHILDON -
219539
PPG
AEROSPACE
Removable Not
TN150951 A-UK PRC DESOTO - CELLOSEELQH - 141 T < 120° - Disqualified; Process Spec: ABP4-5145 -
fasteners Assessed
SHILDON -
219539
PPG COATINGS
Removable Not T < 120° - Non chromated product to be used; Process
TN150952 A-UK SA - HARFLEUR - MASTINOX6856K - 141 -
fasteners Assessed Spec: ABP4-5145
240992
PPG COATINGS
Removable Not T < 120° - Chromate containing - Non Cr product to be
TN150953 A-E MIL-P-8116 SA - HARFLEUR - MASTINOX6856K Z11903 I+D-P-146 141 A-E
fasteners Assessed used
240992
Removable Not
TN150954 A-D _to_be_defined N53622 - 80-T-35-5903 141 T < 120° - no longer used; Standard: WLB5-7070 A-D
fasteners Assessed
Issue AJ Page 101

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 101 van 114
AIRBUS
AIRBUS
A00710010
No
used
PPG COATINGS
TN150955 A-D SA - HARFLEUR - MASTINOX6856K WL5-7070 80-T-35-5903 141 -
fasteners Assessed used; Standard: WL5-7070
240992
SEALANTS
Removable Not T < 120° - lead containing; Standard: MIL-S-8784
TN150956 SON EUROPE SAS - PR1321A - 141 -
fasteners Assessed C1,A; Process Spec: PS6.5206
BEZONS - 176949
PPG COATINGS
TN150957 SON MIL-P-8116 SA - HARFLEUR - MASTINOX6856K - 141 -
fasteners Assessed used
240992
PPG
AEROSPACE -
AIMS04-05-005T1
Removable AIMS04-05- IPS04-05- PRC-DESOTO Not Maximal use temperature in continuous = 95°;
TN150958 A-F CA1000 PQ10010-141-00 IPDA77-01 141 -
fasteners 005 005-01 INTERNATIONAL Assessed Standard: AIMS04-05-005 Type I
PQ10010-141-04
- MOJAVE -
189173
PPG
AEROSPACE -
Removable AIMS04-05- IPS04-05- PRC-DESOTO Not AIMS04-05-005T1 Maximal use temperature in continuous = 95°; Standard:
TN150959 A-E CA1000 I+D-P-146 141 -
fasteners 005 005-01 INTERNATIONAL Assessed Z11906 AIMS04-05-005 Type I
- MOJAVE -
189173
PPG
AEROSPACE -
Removable AIMS04-05- IPS04-05- PRC-DESOTO Not Maximum used temperature in continous T=95°;
TN150960 A-D CA1000 AIMS04-05-005T1 80-T-35-5904 141 -
fasteners 005 005-01 INTERNATIONAL Assessed Standard: AIMS04-05-005 Type I
- MOJAVE -
189173
SEALANTS PR1910
Non removable Primer:1903M Medium PQ10010-142-00 Maximal use temperature in continous = 150°; Process
fasteners issue PQ10010-142-01 Spec: IPDA77.01
BEZONS - 176949
SEALANTS PR1910
Non removable Primer:1903M Medium PQ10010-142-00 Maximal use temperature in continous = 150°; Process
fasteners issue PQ10010-142-01 Spec: IPDA77.01
BEZONS - 176949
D AIRCRAFT
PQ10010-142-00
Non removable AIMS04-05- IPS04-05- PRODUCTS INC - Medium Maximal use temperature in continous = 150°; Process
TN150963 A-F DAPCO2100 PQ10010-142-02 142 -
fasteners 003 003-01 ANAHEIM - issue Spec: IPDA77.01
ABS5460AH6B
135941
SEALANTS PR1910
Non removable Primer:JFP7010 Medium PQ10010-142-00 Temperatures between 120 and 330°; Process Spec:
TN150964 A-F ASNA4180 EUROPE SAS - 142 -
fasteners issue PQ10010-142-03 IPDA77.01
BEZONS - 176949
SEALANTS PR1910
Non removable Primer:JFP7010 Medium PQ10010-142-00 Temperatures between 120 and 330°; Process Spec:
TN150965 A-F ASNA4186 EUROPE SAS - 142 -
fasteners issue PQ10010-142-03 IPDA77.01
BEZONS - 176949
SEALANTS PR1910
Non removable Primer:1903M Medium Temperatures between 120 and 330°; Process Spec:
TN150966 F TH5.945 EUROPE SAS - PQ10010-142-00 142 -
fasteners issue TH6.6429
BEZONS - 176949
SEALANTS PR1910
Non removable Primer:1903M Medium Temperatures between 120 and 330°; IPS: TH5.939/9;
TN150967 F EUROPE SAS - PQ10010-142-00 142 -
fasteners issue Process Spec: TH6.6429
BEZONS - 176949
Issue AJ Page 102

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 102 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS PR1910
Non removable Primer:1903M Medium Temperatures between 120 and 330°; Standard:
TN150968 SON EUROPE SAS - - 142 -
fasteners issue SMS0901; Process Spec: PS6.5203
BEZONS - 176949
Removable
fasteners, PPG COATINGS
Low PQ10010-143-00
TN150969 A-F Temperatures ASNA4189 SA - HARFLEUR - MASTINOXD40 143 Process Spec: IPDA77.01 A-F
issue PQ10010-143-01
between 120 and 240992
330°
Removable
fasteners, IPS04-05- DOW CORNING - PQ10010-143-00
Not Standard: AIMS04-05-005 Type II; Process Spec:
TN150970 A-F Temperatures 005-02 issue GREENSBORO - Molykote111 PQ10010-143-02 143 A-F
Assessed IPDA77.01
between 120 and 4 153699 AIMS04-05-005T2
330°
Removable
fasteners, IPS04-05- DOW CORNING -
Not AIMS04-05-005T2
TN150971 A-E Temperatures 005-02 issue GREENSBORO - Molykote111 I+D-P-146 143 Standard: AIMS04-05-005 Type II A-E
Assessed Z11909
between 120 and 4 153699
330°
Removable IPS04-05- DOW CORNING - PQ10010-143-00
Not Standard: AIMS04-05-005 Type II; Process Spec:
TN150972 A-F sealant for T > 005-02 issue GREENSBORO - Molykote111 PQ10010-143-02 143 -
Assessed IPDA77.01
95° 4 153699 AIMS04-05-005T2
Removable IPS04-05- DOW CORNING -
Not AIMS04-05-005T2
TN150973 A-E sealant for T > 005-02 issue GREENSBORO - Molykote111 I+D-P-146 143 Standard: AIMS04-05-005 Type II -
Assessed Z11909
95° 4 153699
Removable IPS04-05- DOW CORNING -
Not
TN150974 A-D sealant for T > 005-02 issue GREENSBORO - Molykote111 AIMS04-05-005T2 80-T-35-5904 143 Standard: AIMS04-05-005 Type II -
Assessed
95° 4 153699
Non removable
SEALANTS
fasteners in areas High PQ10010-144-00
TN150975 A-F ASNA4156 EUROPE SAS - PR1436GA 144 No longer available; Standard: MIL-S-81733 Type I, IV A-F
exposed to issue PQ10010-144-01
BEZONS - 176949
corrosion
Non removable 3M FRANCE -
fasteners in areas TILLOY LEZ EC1675G C1 or Not PQ10010-144-00
TN150976 A-F ASNA4158 144 No longer available; Standard: MIL-S-81733 Type I, IV A-F
exposed to CAMBRAI - EC1675G A assessed PQ10010-144-02
corrosion 133379
Non removable
SEALANTS
fasteners in areas High PQ10010-144-00 Standard: MIL-S-81733 Type I, IV; Process Spec:
exposed to issue PQ10010-144-03 IPDA77.01
BEZONS - 176949
corrosion
Non removable
SEALANTS
fasteners in areas High PQ10010-144-00
TN150978 A-F ASNB71131 ASNA4165 EUROPE SAS - PR1436GANA 144 Process Spec: IPDA77.01 A-F
exposed to issue PQ10010-144-04
BEZONS - 176949
corrosion
Non removable ABS5419AM7A
SEALANTS
fasteners in areas AIMS04-05- IPS04-05- High PQ10010-144-00 Hollospheres containing - Change of catalyst; Process
TN150979 A-F EUROPE SAS - PR1776AAS 144 A-F
exposed to 001 001-05 issue PQ10010-144-05 Spec: IPDA77.01
BEZONS - 176949
corrosion ABS5459AM7A
SEALANTS
fasteners in areas High PQ10010-144-00 Hollospheres containing - Change of catalyst; Process
TN150980 A-F ASNB71070 ASNA4157 EUROPE SAS - PR1776AAS 144 A-F
exposed to issue PQ10010-144-05 Spec: IPDA77.01
BEZONS - 176949
SEALANTS
fasteners in areas AIMS04-05- IPS04-05- High PQ10010-144-00 Hollospheres containing - Change of catalyst; Process
TN150981 A-F EUROPE SAS - PR1776AAS 144 A-F
exposed to 002 002-05 issue PQ10010-144-05 Spec: IPDA77.01
BEZONS - 176949
Issue AJ Page 103

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 103 van 114
AIRBUS
AIRBUS
A00710010
No
used
Non removable PQ10010-144-00
SEALANTS
fasteners in areas AIMS04-05- IPS04-05- Medium PQ10010-144-06
TN150982 A-F EUROPE SAS - PS892C 144 Change of catalyst; Process Spec: IPDA77.01 A-F
exposed to 001 001-16 issue ABS5459AH7C
BEZONS - 176949
corrosion ABS5419AH7C
Non removable PQ10010-144-00
SEALANTS
fasteners in areas AIMS04-05- IPS04-05- Medium PQ10010-144-06
TN150983 A-F EUROPE SAS - PS892C 144 Change of catalyst; Process Spec: IPDA77.01 A-F
exposed to 002 002-09 issue ABS5459AH7C
BEZONS - 176949
corrosion ABS5419AH7C
Non removable CHEMETALL MC780C PQ10010-144-00 Maximal use temperature in continuous = 80° - Refer to
fasteners in areas AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium
TN150984 A-F PQ10010-144-07 144 Process specification for Primer use; Process Spec: -
exposed to 001 001-21 LANGELSHEIM - issue
ABS5419AM0C IPDA77.01
corrosion 268576
corrosion 268576
corrosion 268576
corrosion 268576
Non removable
SEALANTS ABS5419AM0C
fasteners in areas AIMS04-05- IPS04-05- Not Maximal use temperature in continuous = 80°; Process
exposed to 001 001-30 Assessed Spec: IPDA77.01
BEZONS - 176949 PQ10010-144-00
corrosion
Non removable
BEZONS - 176949 PQ10010-144-00
corrosion
Non removable
BEZONS - 176949 PQ10010-144-00
corrosion
Non removable
BEZONS - 176949 PQ10010-144-00
corrosion
Non removable
SEALANTS
fasteners in areas High PQ10010-024-00 Information transferred from REF.024; Standard: MIL-S-
TN150992 A-F ASNA4156 EUROPE SAS - PR1436GSPRAY 144 A-F
exposed to issue PQ10010-024-01 81733 Type III; Process Spec: IPDA77.01
BEZONS - 176949
corrosion
Non removable
SEALANTS
fasteners in areas High
TN150993 A-E EUROPE SAS - PS870A2 Z16127 I+D-P-146 144 Standard: MIL-S-81733 Type I A-E
exposed to issue
BEZONS - 176949
corrosion
Non removable
SEALANTS
fasteners in areas AIMS04-05- IPS04-05- High
exposed to 001 001-05 issue
BEZONS - 176949
corrosion
Non removable
SEALANTS
fasteners in areas AIMS04-05- IPS04-05- High
exposed to 002 002-05 issue
BEZONS - 176949
corrosion
Issue AJ Page 104
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 104 van 114
AIRBUS
AIRBUS
A00710010
No
used
Non removable CHEMETALL MC780C Z16171 AIMS04-
fasteners in areas AIMS04-05- IPS04-05- GMBH - Primer:MC115 (opt.) Medium Maximal use temperature in continuous = 80° - Refer to
TN150996 A-E 05-014C AIMS04- I+D-P-062 144 -
exposed to 001 001-21 LANGELSHEIM - issue Process specification for Primer use
05-015C
corrosion 268576
TN150997 A-E 05-014C AIMS04- I+D-P-062 144 -
05-015C
corrosion 268576
TN150998 A-E 05-014C AIMS04- I+D-P-062 144 -
05-015C
corrosion 268576
TN150999 A-E 05-014C AIMS04- I+D-P-062 144 -
05-015C
corrosion 268576
Non removable
SEALANTS Z16171 AIMS04-
fasteners in areas AIMS04-05- IPS04-05- Not
TN151000 A-E EUROPE SAS - PR1782C 05-014C AIMS04- I+D-P-062 144 Maximal use temperature in continuous = 80° -
exposed to 001 001-30 Assessed
BEZONS - 176949 05-015C
corrosion
Non removable
BEZONS - 176949 05-015C
corrosion
Non removable
BEZONS - 176949 05-015C
corrosion
Non removable
BEZONS - 176949 05-015C
corrosion
Non removable
SEALANTS
fasteners in areas High Withdrawn because product contains chromates;
TN151004 A-D 80-T-34-9600 EUROPE SAS - PR1436GA - 144 A-D
exposed to issue Standard: WL5-5961
BEZONS - 176949
corrosion
Non removable
SEALANTS
TN151005 A-D EUROPE SAS - PR1436GSPRAY MIL-S81733TYP3 144 A-D
exposed to issue Standard: MIL-S-81733 Type III
BEZONS - 176949
corrosion
Non removable
SEALANTS
TN151006 A-D EUROPE SAS - PR1431G DAN1184 144 A-D
exposed to issue Standard: WL5-5963
BEZONS - 176949
corrosion
Non removable
SEALANTS Chromate containing - No longer to be used; Standard:
fasteners in areas High
TN151007 F EUROPE SAS - PR1436GA PQ10010-144-00 144 MIL-S-81733 Type I; IPS: TH5.951/1; Process Spec: -
exposed to issue
BEZONS - 176949 TH6.6548
corrosion
Non removable PR1436GA
SEALANTS
fasteners in areas PR1436GA NA High
TN151008 SON EUROPE SAS - - 144 Standard: MIL-S-81733 Type I; Process Spec: PS6.5205 SON
exposed to issue
BEZONS - 176949
corrosion
Non removable
ABS5419AM0C
TN151009 A-F _to_be_defined PR1782C PQ10010-144-00 144 -
PQ10010-144-08
corrosion
Issue AJ Page 105
November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 105 van 114
AIRBUS
AIRBUS
A00710010
No
used
Non removable
ABS5419AM0C
PQ10010-144-08
corrosion
Non removable
ABS5419AM0C
PQ10010-144-08
corrosion
Non removable
ABS5419AM0C
PQ10010-144-08
corrosion
Non removable
AIMS04-05-014C
TN151013 A-E _to_be_defined PR1782C AIMS04-05-015C I+D-P-062 144 Maximal use temperature in continuous = 80° -
Z16171
corrosion
Non removable
AIMS04-05-014C
Z16171
corrosion
Non removable
AIMS04-05-014C
Z16171
corrosion
Non removable
AIMS04-05-014C
Z16171
corrosion
PPG
Non removable AEROSPACE -
fasteners in areas AIMS04-05- IPS04-05- PRC-DESOTO Medium PQ10010-144-00
exposed to 001 001-24 INTERNATIONAL Issue PQ10010-144-09
corrosion - MOJAVE -
189173
Removable SEALANTS
High PQ10010-146-00
TN151023 A-F fasteners in fuel ASNA4169 EUROPE SAS - PR1403GA 146 No longer available; Standard: MIL-S-81784 C1,A A-F
issue PQ10010-146-01
zones BEZONS - 176949
Removable SEALANTS PQ10010-146-00
TN151024 A-F fasteners in fuel EUROPE SAS - PR1773A PQ10010-146-02 146 Process Spec: IPDA77.01 -
006 006-01 issue
zones BEZONS - 176949 ABS5461AH1A
Removable SEALANTS PQ10010-146-00
Medium
TN151025 A-F fasteners in fuel ASNA4168 EUROPE SAS - PR1773A PQ10010-146-02 146 Process Spec: IPDA77.01 -
issue
zones BEZONS - 176949 ABS5461AH1A
Permanent SEALANTS PR1828 B LO
AIMS04-05- IPS04-05- primer:PR186 (opt.) Not AIPS05-05-
TN151066 A-D Fastener EUROPE SAS - - 194 T < 120°; Standard: AIMS04-05-007 Type I -
007 007-01 Assessed 001
installation BEZONS - 176949
Permanent SEALANTS
High PQ10010-140-00 T < 80? - No longer available; Standard: MIL-S-8802
TN153194 A-F fasteners.General ASNA4159 EUROPE SAS - PR1422A 140 A-F
issue PQ10010-140-01 CA
PPG
AEROSPACE CA1000V
Removable AIMS04-05- IPS04-05- Not Maximal use temperature in continuous = 95°C
TN153195 A-UK PRC DESOTO - AIMS04-05-005 IPDA77-01
fasteners 005 005-03 Assessed (AIMS04-05-005 Type I)
SHILDON -
219539
Issue AJ Page 106

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 106 van 114
AIRBUS
AIRBUS
A00710010
No
used
PPG
AEROSPACE - PR 2001B
Permanent
AIMS04-05- IPS04-05- PRC-DESOTO (opt.): PR 184 Not AIPS05-05-
TN153333 A-D Fastner - 194 T < 120°; Standard: AIMS04-05-007 Type I -
007 007-02 INTERNATIONAL Assessed 001
Installation
- MOJAVE -
189173
PPG
Permanent AEROSPACE PR 2001B
AIMS04-05- IPS04-05- (opt.): PR 184 Not AIPS05-05-
TN153348 A-D Fastener PRC DESOTO - - 194 T < 120°; Standard: AIMS04-05-007 Type I 
007 007-02 Assessed 001
Installation SHILDON -
219539
PPG
DEUTSCHLAND
Permanent PR-2001B
TN153378 A-UK fasteners.General AIMS04-05-001 ABP4-5141 140 T < 80° New PPG repacking side added -
case
- HAMBURG -
189164
PPG
DEUTSCHLAND
Permanent PR-2001B
TN153379 A-UK fasteners.General AIMS04-05-001 ABP4-5141 140 T < 80° New PPG repacking side added -
case
- HAMBURG -
189164
PPG
DEUTSCHLAND PR-2001B (opt.):
Permanent
AIMS04-05- IPS04-05- SALES & PR 184 Medium AIPS05-05- T < 120°; Standard: AIMS04-05-007 Type I
TN153380 A-F Fastner AIMS04-05-007 194 -
007 007-02 SERVICES GMBH Issue 001 New PPG repacking side added
Installation
- HAMBURG -
189164
PPG
DEUTSCHLAND
Permanent PR-2001B PQ10010-140-
TN153394 A-F fasteners.General 00PQ10010-140- IPDA77-01 140 -
case 08
- HAMBURG -
189164
PPG
Non removable DEUTSCHLAND
PR-2001B PQ10010-144-
fasteners in areas AIMS04-05- IPS04-05- SALES & Medium Process Spec: IPDA77.01 New PPG repacking
TN153395 A-F 00PQ10010-144- IPDA77-01 144 -
exposed to 001 001-24 SERVICES GMBH Issue side added
09
corrosion - HAMBURG -
189164
BASE: MC-216M
Removable
AIMS04-05- IPS04-05- GMBH - MC-216M A-2 Not
TN153445 A-UK fasteners in fuel AIMS04-05-006 146
006 006-07 LANGELSHEIM - HARDENER Assessed
zones
268576
CHEMETALL
Removable MC-216 A
TN153450 A-D fasteners in fuel AIMS04-05-006 146
zones
268576
7 - MISCELLANEOUS
SEALANTS PR1910
Two parts Primer:1903M Medium PQ10010-145-00
TN151018 A-F ASNA4180 EUROPE SAS - 145 Process Spec: IPDA77.01 A-F
silicone issue PQ10010-145-01
BEZONS - 176949
Issue AJ Page 107

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 107 van 114
AIRBUS
AIRBUS
A00710010
No
used
SEALANTS PR1910
Two parts Primer:1903M Medium PQ10010-145-00
TN151019 A-F ASNA4181 EUROPE SAS - 145 Process Spec: IPDA77.01 A-F
BEZONS - 176949
D AIRCRAFT
PQ10010-145-00
Two parts AIMS04-05- IPS04-05- PRODUCTS INC - Medium
TN151020 A-F DAPCO2100 PQ10010-145-02 145 One part premixed; Process Spec: IPDA77.01 A-F
silicone 003 003-01 ANAHEIM - issue
ABS5460AH6M
135941
SEALANTS PR1910
Two parts Primer:JFP7010 Medium PQ10010-145-00
TN151021 A-F ASNA4180 EUROPE SAS - 145 Transfer to PQ10010-101-00; Process Spec: IPDA77.01 -
BEZONS - 176949
SEALANTS PR1910
Two parts Primer:JFP7010 Medium PQ10010-145-00
TN151022 A-F ASNA4186 EUROPE SAS - 145 Transfer to PQ10010-101-00; Process Spec: IPDA77.01 -
BEZONS - 176949
Internal coating
SEALANTS
for electrical Medium PQ10010-150-00
TN151026 A-F EUROPE SAS - PR1720SM 150 high solvent; Standard: CM022 A-F
housing castings issue PQ10010-150-01
BEZONS - 176949
and channels
Coating of SEALANTS
Low PQ10010-151-00
TN151027 A-F internal electrical EUROPE SAS - PR1710 151 Standard: CM024; Process Spec: IPDA83.03 -
issue PQ10010-151-01
tube BEZONS - 176949
PPG
Not
TN151028 A-UK internal electrical PRC DESOTO - PR1710 - ABP7-1244 151 - -
assessed
tube SHILDON -
219539
Coating of SEALANTS
Low
TN151029 A-E internal electrical EUROPE SAS - PR1710 Z16415 151 - A-E
issue
tube BEZONS - 176949
Primer required
for non-painted SEALANTS
Low PQ10010-152-00
TN151030 A-F parts before EUROPE SAS - PR1732 152 Process Spec: IPDA83.03 -
issue PQ10010-152-01
fluorocarbon BEZONS - 176949
sealant coating
Primer required PPG
for non-painted AEROSPACE PR1732
PR1733 Not
TN151031 A-UK parts before PRC DESOTO - - ABP7-1244 152 - -
assessed
fluorocarbon SHILDON -
sealant coating 219539
Primer required
for non-painted SEALANTS PR1732
PR1733 Low
TN151032 A-E parts before EUROPE SAS - Z16416 152 - A-E
issue
fluorocarbon BEZONS - 176949
sealant coating
3M FRANCE -
Filling for non TILLOY LEZ High PQ10010-160-00
TN151033 A-F ASNB81251 ASNA4071 EC3524 160 Process Spec: IPDA74.10 -
drainable areas CAMBRAI - issue PQ10010-160-01
133379
3M FRANCE -
Filling for non AIMS10-03- TILLOY LEZ High
TN151034 A-E I+D-N-18 EC3524 Z18144 160 - -
drainable areas 001 CAMBRAI - issue
133379
Filling for non 3M FRANCE - High
TN151035 A-D 80-T-39-0121 EC3524 DA4-653-8 160 Standard: DAN653-8 -
drainable areas TILLOY LEZ issue
Issue AJ Page 108

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 108 van 114
AIRBUS
AIRBUS
A00710010
No
used
CAMBRAI -
133379
SEALANTS PR812
PR148AF High PQ10010-161-00
TN151036 A-F Fire wall sealant ASNA4170 EUROPE SAS - 161 Process Spec: IPDA77.01 A-F
issue PQ10010-161-01
BEZONS - 176949
SEALANTS PR812
PR148AF High PQ10010-161-00
TN151037 A-F Fire wall sealant ASNA4187 EUROPE SAS - 161 Process Spec: IPDA77.01 A-F
issue PQ10010-161-01
BEZONS - 176949
D AIRCRAFT
PQ10010-161-00
AIMS04-05- IPS04-05- PRODUCTS INC - Medium
TN151038 A-F Fire wall sealant DAPCO2100 PQ10010-161-02 161 Process Spec: IPDA77.01 -
008 008-01 ANAHEIM - issue
ABS5460DH6M
135941
Overcoating of SEALANTS Temperatures between -54° and 121° with short-term
IPSAMS3276- Medium PQ10010-162-00
TN151039 A-F fillets and EUROPE SAS - PR1750A 162 exposure (approximately six hours) to 182?;Standard: -
01 issue PQ10010-162-01
fastener lines BEZONS - 176949 SAE-AMS-3276
Overcoating of SEALANTS PR1828 B LO PQ10010-162-
TN151040 A-F fillets and EUROPE SAS - 00PQ10010-162- 162 T < 120°; Standard: AIMS04-05-007 Type I -
007 007-01 Assessed 001
fastener lines BEZONS - 176949 02
PPG
Overcoating of PQ10010-162-
AIMS04-05- IPS04-05- PRC-DESOTO (opt.): PR 184 Not AIPS05-05- T < 120°C
TN151041 A-F fillets and 00PQ10010-162- 162 -
007 007-02 INTERNATIONAL Assessed 001 Standard: AIMS04-05-007 Type I
fastener lines 03
- MOJAVE -
189173
SEALANTS
AIMS04-05- IPS04-05- Medium PQ10010-163-00
TN151042 A-UK Glazings EUROPE SAS - PR1784B 163 - -
009 009-02 issue PQ10010-163-02
BEZONS - 176949
PPG
AEROSPACE
Medium
TN151043 A-UK Glazings PRC DESOTO - PR1829B - ABP4-5142 163 - -
issue
SHILDON -
219539
SEALANTS
High PQ10010-163-00
TN151044 A-F Glazings EUROPE SAS - PR1425B ABP4-5142 163 - A-F
issue PQ10010-163-01
BEZONS - 176949
SEALANTS
AIMS04-05- IPS04-05- Medium PQ10010-163-00
TN151045 A-F Glazings EUROPE SAS - PR1784B 163 - -
009 009-02 issue PQ10010-163-02
BEZONS - 176949
COOPER Floorsil 87
Sealant for non- PQ10010-164-00
STANDARD Primer:Floorsil 1217 Not Not used for new design - Replaced by Floorsil 2 or
TN151046 A-F textile floor (NTF) PQ10010-164-01 164 SON
GMBH - LINDAU - assessed Floorsil FCS; Process Spec: 80-T-39-1024 BBL 03
covering ASNA5138XXXX
219434
COOPER
STANDARD
Sealant for non- TECHNICAL Floorsil FCS ABS5907B-X-XX
AIMS10-04- IPS10-04- Primer:Floorsil 1217 Not AIPS05-05-
TN151047 A-D textile floor (NTF) RUBBER GMBH - ABS5907BPX-XX 164 "X" in ABS5907 are generic codes for colors -
007 007-01 assessed 010
covering EDINGEN- ABS5907-P
NECKARHAUSEN
- 229376
COOPER Floorsil 2
Sealant for non- ABS5907A-X-
AIMS10-04- IPS10-04- STANDARD Primer:Floorsil 1217 Not AIPS05-05-
TN151048 A-D textile floor (NTF) XXABS5907APX- 164 "X" in ABS5907 are generic codes for colors -
021 021-01 TECHNICAL Assessed 010
covering XXABS5907-P
RUBBER GMBH -
Issue AJ Page 109

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 109 van 114
AIRBUS
AIRBUS
A00710010
No
used
EDINGEN-
NECKARHAUSEN
- 229376
COOPER
STANDARD
Sealant for non- TECHNICAL Floorsil 2 Not for new design after March 2012 - Superseded by
Primer:Floorsil 1217 Not DA4-653-3H8
TN151049 A-D textile floor (NTF) DA4-653-3 - RUBBER GMBH - 164 ABS5907APX-XX, ABS5907A-X-XX, ABS5907-P; A-D
Assessed DA4-653-3SF
covering EDINGEN- Process Spec: 80-T-39-1024 BBL 04
NECKARHAUSEN
- 229376
COOPER
STANDARD
Sealant for non- TECHNICAL Floorsil 2 Not for new design after March 2012 - Superseded by
Primer:Floorsil 1217 Not DA4-653-3H8
TN151050 A-D textile floor (NTF) DA4-653-3 - RUBBER GMBH - 164 ABS5907APX-XX, ABS5907A-X-XX, ABS5907-P; A-D
Assessed DA4-653-3SF
covering EDINGEN- Process Spec: 80-T-39-1024 BBL 04
NECKARHAUSEN
- 229376
SEALANTS PR1828 B LO PQ10010-165-00
Fillets and filling AIMS04-05- IPS04-05- primer:PR186 (opt.) Not Continuous use up to a maximum temperature of 120° in
TN151051 A-F EUROPE SAS - PQ10010-165-01 165 -
of cavities 007 007-01 Assessed air exposure; Standard: AIMS04-05-007 Type I
BEZONS - 176949 AIMS04-05-007
SEALANTS PR1828 B LO PQ10010-165-00

Fillets and filling AIMS04-05- IPS04-05- primer:PR186 (opt.) Not Continuous use up to a maximum temperature of 120° in
TN151052 A-F EUROPE SAS - PQ10010-165-01 165 -
of cavities 007 007-01 Assessed air exposure; Standard: AIMS04-05-007 Type I
BEZONS - 176949 AIMS04-05-007
SEALANTS PR1828 B LO
Fillets and filling AIMS04-05- IPS04-05- primer:PR186 (opt.) Not AIPS05-05- Continuous use up to a maximum temperature of 120° in
TN151053 A-D EUROPE SAS - - 165 -
of cavities 007 007-01 Assessed 001 air exposure; Standard: AIMS04-05-007 Type I
BEZONS - 176949
PPG
AEROSPACE - PR 2001B PQ10010-165- Continuous use up to maximum temperature 120° C in
Fillets and filling AIMS04-05- IPS04-05- PRC-DESOTO (opt.): PR 184 Not AIPS05-05-
TN151054 A-F 00PQ10010-165- 165 air exposure; -
of cavities 007 007-02 INTERNATIONAL Assessed 001
03 Standard: AIMS04-05-007 Type I
- MOJAVE -
189173
Epoxy for internal
Not PQ10010-170-00
TN151055 A-F sealing of _to_be_defined A10,001 170 No longer available; Process Spec: INFT033 A-F
sandwich panels
Sealing High
TN151056 A-D _to_be_defined PL32M - 180 - -
compound issue
CHEMETALL
AIMS04-31- IPS04-31- GMBH - Not Inactive for procurement after 11/10, to be replaced by
TN151057 A-D Gap filler MC450 A1/3 grey AIMS04-31-001 80-T-34-9600 190 -
001 001-01 LANGELSHEIM - assessed AIMS04-31-002
268576
CHEMETALL
AIMS04-31- IPS04-31- GMBH - MC450 B1/3 black or Not Inactive for procurement after 11/10, to be replaced by
TN151058 A-D Gap filler AIMS04-31-001 80-T-34-9600 190 -
001 001-02 LANGELSHEIM - MC450 A1/3 black assessed AIMS04-31-002
268576
CHEMETALL
AIMS04-31- IPS04-31- GMBH - MC450 B1/3 black or Not Inactive for procurement after 11/10, to be replaced by
TN151059 A-D Gap filler AIMS04-31-001 80-T-34-9600 190 -
001 001-03 LANGELSHEIM - MC450 A1/3 black assessed AIMS04-31-002
268576
CHEMETALL Naftoseal MC-460 A-1/4
AIMS04-31- IPS04-31- GMBH - or B-1/4 Not AIPS05-04- Alternatively the substitute 195 can be
TN151060 Airbus Gap filler AIMS04-31-002 190 -
002 002-01 LANGELSHEIM - Gap filler for floor panel Assessed 005 used after valid Mod.
268576 application:Naftoseal
Issue AJ Page 110

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 110 van 114
AIRBUS
AIRSUS
A00710010
No
used
MC-460 A-1/4 or Gap
filler for floor panel
application:Naftoseal
MC-460 B-1/4
Naftoseal MC-460 A-1/4

or B-1/4
Gap filler for floor panel
CHEMETALL application:Naftoseal
AIMS04-31- IPS04-31- GMBH - MC-460 A-1/4 or Gap Not AIPS05-04- Alternatively the substitute 195 can be
TN151061 Airbus Gap filler AIMS04-31-002 190 -
002 002-02 LANGELSHEIM - filler for floor panel Assessed 005 used after valid Mod.
268576 application:Naftoseal
MC-460 B-1/4
Naftoseal MC-460 A-1/4

CHEMETALL Gap filler for floor panel
AIMS04-31- IPS04-31- GMBH - application:Naftoseal Not AIPS05-04- Alternatively the substitute 195 can be
TN151062 Airbus Gap filler AIMS04-31-002A 190 -
002 002-01 LANGELSHEIM - MC-460 A-1/4 Assessed 005 used after valid Mod.
268576
Naftoseal MC-460 B-1/4

CHEMETALL Gap filler for floor panel
AIMS04-31- IPS04-31- GMBH - application:Naftoseal Not AIPS05-04- Alternatively the substitute 195 can be
TN151063 Airbus Gap filler AIMS04-31-002B 190 -
002 002-02 LANGELSHEIM - MC-460 B-1/4 Assessed 005 used after valid Mod.
268576
SEALANTS
Electrical AIMS04-05- IPS04-05- Not
TN151064 A-D EUROPE SAS - PR1764MB AIMS04-05-010 80-T-34-9600 191 Replace Standard DAN1273 (product PR1765) -
conductive 010 010-01 assessed
BEZONS - 176949
Interfay sealing SEALANTS PR1828 B LO
TN151065 A-D for permanent EUROPE SAS - - 193 T < 120°; Standard: AIMS04-05-007 Type I -
007 007-01 Assessed 001
joints BEZONS - 176949
Self-levelling
AVIATION Green®FR (HT3326-
DEVICES & 5FR)
ELECTRONIC Gap filler for seat track
Gap filler, self AIMS04-31- IPS04-31- Low AIPS05-04- Only to be used if mentioned on the drawing or after
TN153289 Airbus COMPONENTS crowns and floor panels: AIMS04-31-003 195 -
levelling material 003 003-01 Issue 005 valid mod.
LLC AV-DEC - Self-levelling Green®FR
FORT WORTH - (HT3326-5FR)
274804
PPG
Interfay sealing
TN153334 A-D for permanent - 193 T < 120°; Standard AIMS04-05-007 Type I
joints
- MOJAVE -
189173
PPG
TN153335 A-F fillets and 00PQ10010-162- 162 T < 120°C; AIMS04-05-007 Type I -
fastener lines 02
- MOJAVE -
189173
Issue AJ Page 111

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 111 von 114
AIRBUS
AIRSUS
A00710010
No
used
PPG
Fillets and filling AIMS04-05- IPS04-05- PRC-DESOTO (opt.): PR 184 Not AIPS05-05- Continuous use up to maximum temperature of 120°C in
TN153336 A-D - 165 -
of cavities 007 007-02 INTERNATIONAL Assessed 001 air exposure; AIMS04-05-007 Type I
- MOJAVE -
189173
PPG
Overcoating of AEROSPACE PR 2001B PQ10010-162-
TN153349 A-F fillets and PRC DESOTO - 00PQ10010-162- 162 T < 120°; Standard: AIMS04-05-007 Type I 
007 007-02 Assessed 001
fastener lines SHILDON - 02
219539
PPG
AEROSPACE PR 2001B PQ10010-165-
Fillets and filling AIMS04-05- IPS04-05- (opt.): PR 184 Not Continuous use up to a maximum temperature of 120° in
TN153350 A-F PRC DESOTO - 00PQ10010-165- - 165
of cavities 007 007-02 Assessed air exposure; Standard: AIMS04-05-007 Type I 
SHILDON - 01AIMS04-05-007
219539
PPG
AEROSPACE - PR 2001B PQ10010-165-
Fillets and filling AIMS04-05- IPS04-05- PRC-DESOTO (opt.): PR 184 Not Continuous use up to a maximum temperature of 120° in
TN153351 A-F 00PQ10010-165- - 165
of cavities 007 007-02 INTERNATIONAL Assessed air exposure; Standard: AIMS04-05-007 Type I 
01AIMS04-05-007
- MOJAVE -
189173
PPG
PR 2001B
AEROSPACE
Fillets and filling AIMS04-05- IPS04-05- (opt.): PR 184 Not AIPS05-05- Continuous use up to a maximum temperature of 120° in
TN153352 A-D PRC DESOTO - - 165
of cavities 007 007-02 Assessed 001 air exposure; Standard: AIMS04-05-007 Type I 
SHILDON -
219539
PPG
PR 2001B
Interfay sealing AEROSPACE
TN153353 A-D for permanent PRC DESOTO - - 193 T < 120°; Standard: AIMS04-05-007 Type I 
007 007-02 Assessed 001
joints SHILDON -
219539
PPG
DEUTSCHLAND PR-2001B (opt.):
Interfay sealing
AIMS04-05- IPS04-05- SALES & PR 184 Medium AIPS05-05- T < 120°; Standard AIMS04-05-007 Type I New
TN153381 A-F for permanent AIMS04-05-007 193 -
007 007-02 SERVICES GMBH Issue 001 PPG repacking side added
joints
- HAMBURG -
189164
PPG
DEUTSCHLAND PR-2001B (opt.): Continuous use up to maximum temperature of 120°C in
Fillets and filling AIMS04-05- IPS04-05- SALES & PR 184 Medium AIPS05-05-
TN153382 A-F AIMS04-05-007 165 air exposure; AIMS04-05-007 Type I New PPG -
of cavities 007 007-02 SERVICES GMBH Issue 001
repacking side added
- HAMBURG -
189164
PPG
DEUTSCHLAND PR 2001B (opt.): T <
AIMS04-05- IPS04-05- SALES & PR 184 Not AIPS05-05- 120°C Standard:
007 007-02 SERVICES GMBH Assessed 001 AIMS04-05-007 Type I New PPG repacking side
fastener lines 03
- HAMBURG - added
189164
PPG
DEUTSCHLAND PR 2001B (opt.): Continuous use up to maximum temperature 120° C in
PQ10010-165-
Fillets and filling AIMS04-05- IPS04-05- SALES & PR 184 Not AIPS05-05- air exposure;
TN153397 A-F 00PQ10010-165- 165 -
of cavities 007 007-02 SERVICES GMBH Assessed 001 Standard: AIMS04-05-007 Type I New
03
- HAMBURG - PPG repacking side added
189164
Issue AJ Page 112

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 112 von 114
AIRBUS
Al~SUS
A00710010
No
used
PPG
DEUTSCHLAND PR 2001B (opt.):
AIMS04-05- IPS04-05- SALES & PR 184 Not AIPS05-05- T < 120°C; AIMS04-05-007 Type I New PPG
007 007-02 SERVICES GMBH Assessed 001 repacking side added
fastener lines 02
- HAMBURG -
189164
PPG
DEUTSCHLAND PR 2001B (opt.): PQ10010-165- Continuous use up to a maximum temperature of 120° in
Fillets and filling AIMS04-05- IPS04-05- SALES & PR 184 Not
TN153399 A-F 00PQ10010-165- IPDA77-01 165 air exposure; Standard: AIMS04-05-007 Type -
of cavities 007 007-02 SERVICES GMBH Assessed
01AIMS04-05-007 I New PPG repacking side added 
- HAMBURG -
189164
8 - SEALANT FOR NUT CAP APPLICATION
CHEMETALL MC-238 B
Sealant for nut AIMS04-05- IPS04-05- GMBH - Primer:MC110 Not AIPS01-03-
TN153059 A-UK - 192 - -
cap application 002 002-02 LANGELSHEIM - assessed 011
268576
8 - SEALANTS
BASE:
CHEMETALL NAFTOSEAL MC-216M
AIMS04-05- IPS04-05- GMBH - A-2 HARDENER: Not
TN153419 A-E AIMS04-05-006 NAFTOSEAL MC-216M AIMS04-05-006
268576 A-2 H
BASE:
CHEMETALL NAFTOSEAL MC-216M
B-2 HARDENER:
TN153420 A-E AIMS04-05-006 NAFTOSEAL MC-216M AIMS04-05-006
268576 B-2 H
BASE: MC-216M
AIMS04-05-006 AIMS04-05- IPS04-05- GMBH - NAFTOSEAL MC-216M Not
TN153434 A-UK AIMS04-05-006
class B 006 006-08 LANGELSHEIM - B-2 HARDENER Assessed
268576
BASE: MC-216M
AIMS04-05-006 AIMS04-05- IPS04-05- GMBH - MC-216M A-2 Not
TN153435 A-UK AIMS04-05-006
class A 006 006-07 LANGELSHEIM - HARDENER Assessed
268576
Issue AJ Page 113

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 113 von 114
AIRBUS
AIRBUS
A00710010
Issue AJ Page 114

November 2021
Aug 01/22
A 007 10010 I PMS 02-04-00 Seite 114 von 114

Sealant Info (PMS 02-04-00)

Uploaded by

Copyright:

Available Formats

Sealant Info (PMS 02-04-00)

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sealant Info (PMS 02-04-00)

Uploaded by

Copyright:

Available Formats

AIRBUS

Jf-mCI-SS ANO MA I f--RIAI Sl-'f--CII-ICA I ION

Technical Notes (TN)

:c::.;opynqht Airbus ::iA::i LUZ) :JMS []:)-[la-[ l[ l / ~IHl71 IIIJ1i::

TECHNICAL NOTES (TN)

Published and distributed by :

1.3.1 By the engineering

1.3.2 By other departments (procurement, production,customer services)

2. TABLES OF QUALIFIED-EQUIVALENT AND SUBSTITUTE MATERIALS

2.1 Definition of the columns

3. SUMMARY OF SEALANT APPLICATIONS

3.1.1 Sealing of pressure cabins

3.1.2 Sealing of fuel tanks

3.1.3 Sealing against penetration of condensed water or other liquids in:

3.2 Protection against corrosion

3.3 Various applications

4.1.1 Interfay Sealant

4.1.3 Overcoating of Fastener Ends and Joints Fillet Area

4.1.4 Filling of Cavities (Interior and Exterior)

4.1.5 Wet Installation of Fasteners (See TN A.007.10003)

4.2 General Characteristics of Commonly used Sealants

1. General definition of sealing areas

2. General sealing principles

2.1 Interfay Sealing

3. Sealing of bonded sandwich structures

4.1 Sealing in non-pressurised areas

5. Details of sealing instructions and partner responsibility

6. Equivalence between the new and old sealing codification

For A320 see TDD 51.S.001D

1.3 Non metallic materials affected by this Technical Note

1.4 Application of the Technical note

1.4.2 By Other Departments (Procurement, Manufacturing, Customer Services,..)

2. Tables of qualified-equivalent and substitute materials

2.1 Definition of the columns

2.1.4 Standard or Specification

2.1.5 Individual Product Specification column

2.1.7 Product Designation

2.1.8 EHS Status

2.1.9 Drawing designation

2.1.10 Process specification

2.1.11 Equivalent or substitute

2.1.13 No longer to be used

3 Summary of sealant applications

3.1.1 Sealing of Pressure Cabins

3.1.2 Sealing of Fuel Tanks

3.1.3 Sealing against penetration of condensed water or other liquids in:

3.2 Protection against Corrosion

3.3 Various Applications

 As a cavity filler and as an aerodynamic filler.

4 Procedure for selecting sealants

4.1 Application of Sealant

4.1.1 Interfay Sealant

4.1.3 Overcoating of Fastener Ends and Joints Fillet Area

4.1.4 Filling of Cavities (Interior and Exterior)

4.1.5 Wet Installation of Fasteners (See TN A.007.10003)

4.2 General Characteristics of Commonly used Sealants

Table 1: General characteristics of commonly used sealants

Property Polysulphides Silicones

Maximum temperature for short term

Adhesion to CAA or Alodine coated

As a cavity filler and as an aerodynamic filler.