Model 425

Wing Union Pressure Transmitter

DESCRIPTION
The Model 425 Wing Union Pressure Transmitters are rugged welding process which also ensures hermetic integrity for all
sensors designed for use with 1502 wing unions in demanding field conditions. These transmitters incorporate special assem-
land-based and off-shore applications. bly processes to vibration and shock proof the components to
ensure performance is maintained during the rigors of
The isolated pressure sensing diaphragm minimizes zero shift
fracturing and cementing applications. The 1502 wing union
during hammer-up and eliminates long-term signal drift in the
compatible fittings are machined of Inconel® X-750 providing
field. The sensor diaphragm and wing union fitting are machined
service with highly abrasive and corrosive media. This configura-
as one part. The Model 425 is constructed as an all-welded
tion complies with NACE Standard MR-01-75 (1980) for corro-
assembly using a deep penetration, proprietary, electron beam
sive service.

FEATURES
• Quick delivery service
• Long life X-750 material
• Rugged, robust design
• RFI/EMI protected
• 0.2 % accuracy
• Optional on-board temperature sensor
• Intrinsically safe
• CE approved
Model 425
PERFORMANCE SPECIFICATIONS MECHANICAL SPECIFICATIONS
Characteristic Measure Characteristic Measure
Pressure ranges 0 psi to 5000 psi; 0 psi to 6000 psi; 0 psi Media Corrosive and abrasive service, Inconel
to 10000 psi; X-750
0 psi to 15000 psi; 0 psi to 20000 psi3 Overload, safe 150 % rated full scale pressure or limit
Accuracy1 ±0.2 % best fit straight line of wing union 1502 fitting
Calibration 5-point calibration: 0 %, 50 %, and 100 Overload, burst 250 % rated pressure or limit of wing
% of full scale union 1502 fitting
Output 4 mA to 20 mA, two-wire Pressure port 1502 wing union, 51 mm [2 in] pipe,
Resolution Infinite male sub end
Wetted parts material Inconel X-750
Weight 2722 g [6 lb]

ENVIRONMENTAL SPECIFICATIONS Case material 316L stainless steel (labels are welded
stainless steel with embossed charac-
Characteristic Measure ters)
Temperature, operating -43 °C to 93 °C [-45 °F to 200 °F]
Temperature, -34 °C to 82 °C [-30 °F to 180 °F]
compensating
RANGE CODES
Temperature effect, zero 0.018 % full scale/°C [0.01 % full Range Code Available ranges
scale/°F] DR 0 psi to 5000 psi
Temperature effect, span 0.018 % reading/°C [0.01 % reading/°F] DS 0 psi to 6000 psi
Temperature effect, sealing Hermetically sealed IP68/NEMA 6P DV 0 psi to 10000 psi
EJ 0 psi to 15000 psi
EL 0 psi to 20000 psi3
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Supply voltage 9 Vdc to 28 Vdc WIRING CODES
Insulation resistance >100 MOhm @ 50 Vdc
Amp (NS), 3-cond, 4 pin, ground
Max. loop resistance 950 ohm @ 28 V decreasing linearly to
A No connection
0 ohm @ 9 V
B (+) Output
Circuit protection Reverse polarity protection of supply
leads C (+) Supply
RFI/EMI protection Noise immunity from 5000 Hz to 1 GHz D Case ground
Frequency response Customer specified and factory in-
stalled filter for frequency response of
min. 10 Hz to max. of 2500 Hz
Zero and span adjustment Field adjustable by removing connector
Electrical termination (std) Standard electrical termination: 4-pin
MS3102 connector designed in stain-
less steel specifically for the oil and gas
industry; offers full hermetic sealing and
direct “Glenair” connector compatibility

2 Honeywell • Sensing and Control

 Wing Union Pressure Transmitter
INTERNAL AMPLIFIERS OPTION CODES
Intrinsically safe amp: Range Code Many range/option combinations are available in
Amplifier specifications Option 2n(2N)*** our quick-ship and fast-track manufacture pro-
grams. Please see http://sensing.honeywell.com/
Output signal 4 mA to 20 mA TMsensor-ship for updated listings.

Input power (voltage) 9 Vdc to 28 Vdc Pressure 0 psi to 5000 psi; 0 psi to 6000 psi; 0 psi to
ranges3 10000 psi; 0 psi to 15000 psi; 0 psi to 20000 psi
Input power (current) 4 mA to 24 mA
Frequency response (amp) 2500 Hz Temperature
-34 °C to 82 °C [-30 °F to 180 °F]
compensation
Power supply rejection 60 db
Operating temperature -43 °C to 93 °C [-45 °F to 200 °F] Internal 2n(2N). 4 mA to 20 mA, two-wire output; intrinsi-
Reverse voltage protection Yes amplifiers cally safe

Short circuit protection Yes Standard electrical termination: 4-pin MS3102

connector designed in stainless steel specifically
Wiring code: connector (std) A No connection
for the oil and gas industry; offers full hermetic
B (+) Output
sealing and direct “Glenair” connector compat-
C (+) Supply
D Case ground
Electrical ibility
termination 6a. Bendix PTIH-10-6P (or equivalent) 6 pin
(max. 121 °C [250 °F])
*** See Honeywell’s Web site for the most up-to-date information regarding intrinsi-
6j. 1/2 in NPT conduit
cally safe approvals, ref. #008-0547-00.
Call Factory: Jupiter connection
Call Factory: Other connection(s) - By request
MOUNTING DIMENSIONS Shunt
3d. Remote buffered shunt calibration
calibration
9a. 10 point (5 up/5 down) 20 % increments @
Special 21 °C [70 °F]
calibration2 9b. 20 point (10 up/10 down) 10 % increments
@ 21 °C [70 °F]
Wetted
10e. Inconel X-750
diaphragm
Zero and span
14b. Top access to pots
adjustment
45c. RTD output direct to connector. Gives
temperature as a resistance reading.
Temperature
Intrinsically safe
sensing options
45d. RTD with temperature as a 4 mA to 20 mA
output. Not intrinsically safe.

For reference only

Honeywell • Sensing and Control 3

Model 425 Wing Union Pressure Transmitter
NOTES Warranty. Honeywell warrants goods of its manufacture as
1. Accuracies stated are expected for best fit straight line for all errors being free of defective materials and faulty workmanship.
including linearity, hysteresis and non-repeatability thru zero.
Honeywell’s standard product warranty applies unless agreed
2. Availability varies with range.
3. Working pressure and approval limited to 15000 psi. Amplifier will to otherwise by Honeywell in writing; please refer to your
allow overpressure readings to 20000 psi. order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.

While we provide application assistance personally, through our

literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.

Specifications may change without notice. The information we

supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.

WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.

Find out more WARNING

Honeywell serves its customers MISUSE OF DOCUMENTATION
through a worldwide network of • The information presented in this datasheet is for
sales offices, representatives reference only. DO NOT USE this document as product
and distributors. For application installation information.
assistance, current specifica- • Complete installation, operation and maintenance
information is provided in the instructions supplied with
tions, pricing or name of the
each product.
nearest Authorized Distributor,
Failure to comply with these instructions could result in
contact your local sales office.
death or serious injury.
To learn more about Honeywell’s
test and measurement products,
call +1-614-850-5000, visit
www.honeywell.com/sensotec,
or e-mail inquiries to
info.tm@honeywell.com

Sensing and Control

Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 008682-3-EN IL50 GLO
September 2009
www.honeywell.com Copyright © 2009 Honeywell International Inc. All rights reserved.
® Inconel is a registered trademark of Inco Alloys International, Inc.