MPK-204e I09032401

200 A DIGITAL
MICRO-OHMMETER
]
MICROPROCESSOR The MPK-204e high current micro-ohmmeter is a portable,
microprocessor-controlled instrument, used to accurately measure very
CONTROLLED
low contact resistances of breakers and switches, busbars, transformers
]
ALPHANUMERICAL winding and engines, etc, with test currents from 1 mA to 200 A. It employs
DISPLAY the 4 terminals-method to avoid measurement errors caused by test leads
and their contact resistances. Resistances readings are shown in the
]
RESOLUTION DOWN TO: alphanumeric display with up to 4½ digits-resolution. It allows to measure
0,1 µΩ resistances up to 200 Ω, with a resolution of up to 0.1 µΩ.
Using its internal rechargeable battery, measurements with up to 10 A
]
RESISTANCE READING
test current may be carried out without connecting the equipment to mains
UP TO: 200 Ω
power. Powered by to mains power, it allows to measure with any test
]
UP TO 200 A current up to 200 A.
TEST CURRENT Measurement accuracy is guaranteed by an state-of-the-arts signals
amplification system, offset-free and of high long-term stability. Test
]
KELVIN-TYPE (4 - WIRES) current may be adjusted by the operator in every one of the scales and their
MEASUREMENT values are measured using an analogue indicator (bargraph), making it
easy to measure resistances with a significant inductive component, as in
]
POWERED BY INTERNAL the case of big transformers windings.
BATTERY (UP TO 10 A) It has a serial data output (RS232) that may be connected to a printer,
OR MAINS SUPPLY computer, or any data collector to register measured values. The Hold
function keeps in the display the measured value at a certain time-point,
]
DIRECT READING (UP TO
when the corresponding key is pressed.
4½ DIGITS)
The high-current generation system is based on modern technology
]
OVERHEATING that allows to significantly decrease both its weight (16kg) and size. The
PROTECTION cabinet is made of plastic material highly resistant to impacts and to
environmental challenges. Internal thermal sensors in all sensitive
]
SERIAL DATA OUTPUT components avoid any damaged caused to the instrument due to
(RS232) overheating.
This is a strong but lightweight equipment, and may be easily carried
by one person. It is water-resistant and can be used under severe weather
conditions offering an excellent performance working both in the laboratory
and out in the field.
www.megabras.com
MPK 204e - TECHNICAL SPECIFICATIONS
TEST CURRENTS SERIAL DATA OUTPUT

1 mA, 10 mA, 100 mA, 1 A, 10 A, 200 A RS232 @ 4800 bps. Suitable for data collection in an
Each current may be continuously adjustable from 0 to external serial printer, computer or data-logger.
100%
ENVIRONMENTAL PROTECTION
RESISTANCE RANGES IP54 with closed lid.
0-2000 µΩ @ 200 A
0-20 mΩ @ 10 A SAFETY CLASS
0-200 mΩ @ 1 A Meets the requirements of IEC 61010-1:1990,
0-2000 mΩ @ 100 mA
IEC 61010-1:1992 amendment 2
0-20 Ω @ 10 mA
0-200 Ω @ 1 mA
POWER SUPPLY
RESOLUTION Mains or internal battery powered.
Internal battery: rechargeable, sealed lead-acid, 12 V -
0,1 µΩ @ 200 A
1 µΩ @ 10 A 7 Ah (for up to 10 A test current).
10 µΩ @ 1A Mains supply: 220-240 V~ (for up to 200 A test current).
100 µΩ @ 100 mA
1 mΩ @ 10 mA BUILT-IN BATTERY CHARGER
10 mΩ @ 1 mA For 220-240 V~ mains supply.
MEASUREMENT PRINCIPLE OPERATING TEMPERATURE RANGE

Four-terminal, Kelvin-type. -5°C to 50°C.
CONTINUOUS OPERATION TIME STORAGE TEMPERATURE RANGE

At 200 A this equipment may be used continuously for -25°C to 65°C.
aprox. 3 minutes before the thermal protection activates.
At 10 A or less, there is not a limited time for continuous HUMIDITY RANGE
operation. 95% RH (non condensing).
THERMAL PROTECTION EQUIPMENT WEIGHT

Protects all sensitive components, avoiding any damage Approx. 16 kg.
due to overheating.
DIMENSIONS
BASIC ACCURACY 502 x 394 x 190 mm.
R < 0.5 mΩ: ± (0.50% of reading + 2 ULSD*)
INCLUDED ACCESSORIES
R ≥ 0.5 mΩ: ± (0.20% of reading + 2 ULSD*)
2 combined current and potential leads for 10 A (1.8 m).
* Units of the Least Significant Digit. 2 combined current and potential leads for 200 A (6 m).
1 communication cable (RS232).
ADVANCED FEATURES 1 power cord.
Digital direct reading of very low resistances in the 1 user guide.
1 case for the accessories.
alphanumerical display, with up to 4½ digits.
Very fast and accurate measurements.
TEST CURRENT MEASUREMENT

The current is digitally measured and a bargraph shows
the result. The bargraph indication is specially useful
when measuring inductive loads, so that the operator can
verify easily when the test current has been stabilized.
Subject to technical change without notice. This catalogue is not a contractual document.
I09032401

MPK-204e I09032401

Uploaded by

Copyright:

Available Formats

MPK-204e I09032401

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MPK-204e I09032401

Uploaded by

Copyright:

Available Formats

200 A DIGITAL

TEST CURRENTS SERIAL DATA OUTPUT

MEASUREMENT PRINCIPLE OPERATING TEMPERATURE RANGE

CONTINUOUS OPERATION TIME STORAGE TEMPERATURE RANGE

THERMAL PROTECTION EQUIPMENT WEIGHT

TEST CURRENT MEASUREMENT

You might also like