Aqua SMARTPro® Transmitters

For reliable and continuous measurement of pH, Conductivity and DO

7.00 pH

Energy Conservation | Environment | Process Efficiency www.forbesmarshall.com

 Aqua SMARTPro ® Series is feature packed with -

- User Friendly, Password Protected Menu-driven program with a simple

set-up and easy to use.
- Built-in non-volatile memory to ensure that calibration and other
information is not erased if power supply fails.
- Calibration and sensor offset adjustment from the keypad, additional
For reliable and continuous magnetic key for programming.
measurement of water - Large dual line Display.
quality insist on Aqua - Automatic temperature compensation (ATC).
®
SMARTPro Transmitters - Manual temperature compensation setting without ATC probe, with
independent setting for calibration and process temperature.
- One galvanically isolated Current output 4…20mA with HART
communication Protocol.
- Protection against electromagnetic interference
- Three galvanic isolated open collector output for Over-Range, Under-
Range and Error Detection in non-Ex version.

Applications
Forbes Marshall, your trusted partner in - DM water
providing Water Quality analyzers in
- RO water
India, introduces the microcontroller
based 2-WIRE HART Transmitter, Field - Water treatment
Mount Aqua SMARTPro® series which - Chemical / Petrochemical
assures reliable and continuous
- Bio Pharma
measurement of parameters like pH,
Redox, Dissolved Oxygen, Conductivity, - Sugar/ Textile / Paper/ Food
Resistivity and Total Dissolved Solids - Power Plants
(TDS) which are of vital importance
- And many more
across the entire spectrum of
applications.
Dimension Drawing
General Specifications

Display

Local Display Two line dot matrix with 10 characters per line LCD display

Display Function Programmable for continuous or sequential display of measured value,

temperature, units and error messages.

Keypad

Keypad Three button keypad and magnetic pin programming with user friendly
menu interface.

Output

Communication Protocol HART 7.0 Compatible

Current Output 4-20 mA DC, galvanically isolated output with accuracy better than
0.3% of full scale

Open Collector Outputs Three open collector outputs with max load of 100mA @ 24VDC,
(For Safe Area version only) galvanically isolated from the sensor and the output current for:
1. Error Detection
2. Over Range Detection
3. Under Range Detection

Note: External relay option available for potential free contact requirment.

Power Requirements

Input 12 – 36 VDC with maximum load 600Ù at 24 VDC

Power consumption Less than 53mW at 24V DC

Mechanical Specifications

Housing Material Die-cast Aluminium (LM6) with epoxy paint (Non-corrosive).

Connections Glands 1 x ½ “ NPT – Sensor

2 x M20 Supply and Open Collector Outputs

Weight 4000 Gms.

Mounting Type Wall / 2” Pipe type (Vertical and Horizontal)

Intrinsically Safe Ex[ia] Group IIA, IIB, IIC T6

Protection Class IP 67

Electromagnetic Compliance as per EMC Directive (2004/108/EEC)

Emitted Interference Generic Emission & Immunity Standards

IEC 61000 – 6 – 2 & IEC 61000 – 6 – 3

Immunity to Interference Radiated Immunity as per IEC 61000 – 4 – 3

Electrical fast Transient or Burst Immunity As per level 2 - IEC 61000 – 4 – 4

Surge Immunity As per Level 2 – IEC 61000 – 4 – 5

RF Conducted Susceptibility As per Level 3 – IEC 61000 – 4 – 6

Immunity to Electrostatic Discharge As per Level 3 - IEC 61000 - 4 - 2

Environmental Conditions

Ambient Temperature Operating Range -20 to +70º C

Maximum Relative Humidity 90% Non-condensating

Technical Specifications

FOR pH — Aquamon SMARTPro ® 8966

pH
Range 0 – 14 pH
Resolution 0.01 pH
Accuracy +/- 0.01 pH
Span Minimum 2pH to Maximum 14pH (Programable)
mV (ORP)
Range +/- 2000 mV
Resolution +/- 1 mV
Accuracy +/- 1 mV
Span Minimum 200mV to maximum 4000 mV (Programmable)
Temperature
Range -20º C to +200º C
Resolution 0.01º C
Accuracy ± 0.5 % of FS
Sensor PT 100 (Default) / PT 1000
Compensation Automatic or Manual
Calibration
pH Sensor Slope 70% to 110%
pH sensor zero ± 2pH
Method Single / Double Point
Diagnostics
Measurement Mode Temperature Sensor Open
Temperature Sensor Short
Calibration Mode Slope Error
Zero Error
Calibration Error
Output
Current Output – pH/ORP Proportional to measured pH/ORP. Galvanically isolated from the sensor
with accuracy better than 0.3% of full scale
HART Superimposed on 4-20mA output

FOR CONDUCTIVITY — Aquacon SMARTPro ® 8967

Conductivity
Range (with auto range facility) Measuring Range Cell Constant K Resolution
0 to 10 µS/cm 0.01 0.01
0 to 100 µS/cm 0.01 0.1
0 to 1000 µS/cm 0.1 0.1
0 to 10 mS/cm 1 0.01
0 to 100 mS/cm 10 0.01
Accuracy ± 0.5% of FS of Range
Span Minimum 5% to Maximum 100% of measurement range (Programmable)
Calibration
Conductivity Single point
Resistivity
Range (with auto range facility) Measuring Range Cell Constant K Resolution
100 MΩ.cm to 10 KΩ.cm 0.01 0.01
10 MΩ.cm to 1 KΩ.cm 0.1 0.1
1 MΩ.cm to 0.1 KΩ.cm 1 0.01
0.1 MΩ.cm to 0.01KΩ.cm 10 0.01
Accuracy ± 0.5% of FS of Range
Temperature
Range -20º C to +200º C
Resolution 0.01º C
Accuracy ± 0.5 % of FS
Sensor PT 100 (Default) / PT 1000
Compensation Automatic or Manual or Uncompensated (Programmable)
Diagnostics
Measurement Mode Sensor Open
Sensor Short
Temperature Sensor Open
Temperature Sensor Short
Calibration Mode Cell Constant error
Output
Current Output – Conductivity/ resistivity 4-20 mA galvanically isolated output proportional to the measured
conductivity value with accuracy better than 0.3% of full scale.
HART Superimposed on 4-20mA output

FOR DO – AquaDO SMARTPro ® 8968

DO
Range (with auto range facility) Measuring Range Unit Resolution
0 to 500 % 0.1
50 to 9999 µg/l or PPB 1
0.05 to 20 mg/l or PPM 0.01
0.05 to 50 mg/l or PPM 0.1
Accuracy ± 0.5% of FS
Temperature
Range -10.0 to +150.0 Deg C
Resolution 0.01º C
Accuracy ± 0.5 % of FS
Sensor NTC 22 K Ohm
Compensation Automatic or Manual
Process parameter
Pressure 0 to 5 bar (Programmable)
Salinity 0 to 50 PPT (Programmable)
Humidity 0 to 100% (Programmable)
Calibration
DO Single/Dual point calibration
Diagnostics
Measurement Mode Sensor Short
Temperature Sensor Open
Temperature Sensor Short Calibration Mode
Unstable Current Output Error
Range Error
Output
Current Output 4-20 mA proportional to measured DO value. Galvanically isolated from
the sensor with accuracy better than 0.3% of full scale
HART Superimposed on 4-20mA output
FOR TDS – AquaTDS SMARTPro ® 8969

TDS
Range (with auto range facility) Measuring Range* Cell Constant K Resolution
0 to 7 ppm 0.01 0.01 ppm
0 to 70 ppm 0.01 0.01 ppm
0 to 700 ppm 0.1 0.1 ppm
0 to 7 ppt 1 0.01 ppm
0 to 70 ppt 10 0.1 ppm
*TDS ranges calculated considering TDS factor 0.7

TDS Factor 0.1 to 1.00 (programable)

Accuracy ± 0.5 % of FS
Temperature
Range -20º C to +200º C
Resolution 0.01º C
Accuracy ± 0.5 % of FS
Sensor PT 100 (Default) / PT 1000
Temperature Coefficient 0.0 to 5.0 % (Programmable)
Compensation Automatic or Manual or Uncompensated (Programmable)
Diagnostics
Measurement Mode Sensor Open
Sensor Short
Temperature Sensor Open
Temperature Sensor Short
Calibration Mode Cell Constant error
Output
Current Output 4-20 mA proportional to measured TDS value. Galvanically isolated
from the sensor with accuracy better than 0.3% of full scale.
HART Superimposed on 4-20mA output

Ordering Information

MODEL DESCRIPTION ITEM CODE

Aquamon SMARTPRO ® 8966 pH Transmitter SMARTPRO PH 8966
Aquacon SMARTPRO ® 8967 Conductivity Transmitter SMARTPRO COND 8967
AquaDO SMARTPRO ® 8968 DO Transmitter SMARTPRO DO 8968
AquaTDS SMARTPRO ® 8969 TDS Transmitter SMARTPRO TDS 8969
Note: Add a suffix as Ex to the model or item code for Intrinsically safe requirement. (e.g. SMARTPRO PH 8966-Ex)

Opp 106th Milestone B-85, Phase II, Chakan Indl Area A-34/35, MIDC H Block
Bombay Poona Road Sawardari, Chakan, Tal. Khed Pimpri, Pune - 411 018. INDIA.
Kasarwadi, Pune - 411 034. INDIA Dist. Pune - 410 501. INDIA Tel : 91(0)20-27442020, 39851199
Tel : 91(0)20-27145595, 39858555 Tel : 91(0)2135-393400 Fax : 91(0)20-27442040
Forbes Marshall Fax : 91(0)20-27147413
Krohne Marshall CIN No.: U28996PN1985PTC037806
Forbes Marshall Arca Email : pasales@forbesmarshall.com, ccmidc@forbesmarshall.com www.forbesmarshall.com
Codel International
All contents herein are the property of Forbes Marshall Private Limited (“FMPL”) or Forbes Marshall Steam Systems Private
Forbes Solar Limited (“FMSSPL”), as the case may be, and having protection under the intellectual property rights. Any reproduction,
Forbes Vyncke distribution or disclosure without prior written permission is prohibited. Information in this document is subject to change
Forbes Marshall Steam Systems without notice.

DOC#FMPA/0316/1504/V3.R0