UP STANDARD DETAIL REFERENCE DRAWINGS

DETAIL OF HEAVY WELDING BOSSES FOR THREADED CONNECTIONS AE-036175

N
AWAY AWAY
Remark: Shop Weld CONSTRUCTION-NOTES AND DETAILS FOR ISOMETRIC PIPING
INSULATION DETAILS FOR HOT PIPING
AD-036627
AA-036911

SHOP MATERIALS INSULATION DETAILS FOR COLD PIPING AA-036913

INSTALLATION OF JACK SCREWS FOR FLANGED JOINTS AC-036630

Filed Weld
TOWARD TOWARD PT N.B.
NOTES
NO DESCRIPTION (INS) STOCK CODE QTY
1. MATERIAL SHOWN WITH A BROKEN LINE AND SPOOLS LISTED IN THE SAUDI ARAMCO
DOWN
PIPE FABRICATION LIST ARE NOT TO BE FURNISHED BY THE VENDOR.

2. PIPING DETAILS SHALL BE CUT AT ALL POINTS MARKED F.W. (FIELD WELD).

1 PIPE , CS API 5L-X65Q-PSL2 , SMLS , BE , 4 PPPCS3SMBESTD2S 0F2 0.7 M 3. EACH FABRICATED SECTION SHALL BE CLEARLY MARKED WITH ITS CODE NUMBER.

4. UNLESS OTHERWISE NOTED. (A) ALL DIMENSIONS ARE TO C OR FACE OF FLANGES.

STD , B36.10M , NACE MR0175/ISO 15156 (B) BOLT HOLES ON FLANGES STRADDLE C . (C) WELDING ELBOWS ARE LONG RADIUS.

5. FABRICATION SHALL BE IN ACCORDANCE WITH SAUDI ARAMCO SPECIFICATION 01-SAMSS-10.

FITTINGS 6. GASKET ALLOWANCE

7. PIPING MATERIAL IS

2 SOCKOLET , CS A694-F65 , CL3000 , SW , 4X1 PLSCO8K3000S223 2

HDR/BRN , SP-97 , NACE MR0175/ISO PIPE SIZE SCHEDULE SPECIFICATION

15156 REF MTO REF MTO REF MTO

FLANGES
3 WN FLG , CS A859-A CL.2 , CL600 , RF , 4 PFWCOT60RFSTD2A 3
STD , B16.5 , NACE MR0175/ISO 15156 8. WELDING STRESS RELIEF - YES NO

4 WN FLG , CS A859-A CL.2 , CL600 , RF , 4 PFWCOT60RFSTDSO 1 RADIOGRAPHY % 100% X-RAY SPOT X-RAY 01-SAMSS-10
X SHOP FIELD

NO
STD , B16.5 , NACE MR0175/ISO 15156 , 9. TESTING SHOP HYDROSTATIC TEST - YES
THE SHOP HYDROSTATIC TEST SHALL BE CARRIED OUT ON PIECES HAVING ALL ENDS

C/W JACK SCREWS , PROJ STD DRG NO FLANGED.

AC-036630 10. ALL PIPING MATERIAL IS IN ACCORDANCE WITH SAUDI ARAMCO ENGINEERING SPECIFICATION
SAES-L-105 CLASS 6CS2P06_02
. ALL EXCEPTIONS ARE NOTED ON THE ISOMETRIC.

11. INSULATION SHOWN ON DRAWING

N/A
12. REFER TO HYDROSTATIC TEST DIAGRAM.
FIELD MATERIALS 13. FOR SMALL BORE LINES (UPTO 1-1/2" ) DIMENSIONS, ROUTING & SUPPORTING SHALL BE FIELD ADJUSTED.

14. TIE-IN POINTS CO-ORDINATES TO BE VERIFIED BY CONTRACTOR IN FIELD.

15. PAINTING / COATING SHALL BE AS PER TB-223080 FOR HARADH AND TB-843596 FOR HAWAIYAH.
PT N.B. 16. WELDS SHALL BE RADIOGRAPHED AS PER SAES-W-011.

NO DESCRIPTION (INS) STOCK CODE QTY 17.DELETED.

0F2

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL, OR IN PART, SHALL BE OBTAINED FROM THIS DRAWING WITHOUT THE WRITTEN CONSENT OF SAUDI ARAMCO.
FITTINGS
638398-004-SPL-02 0F2 5 FIG-8 BLANK , CS A516-70 , CL600 , RF , 4 PK8C7G60RF0009O 1
HOLDS:
1. CERTIFIED VENDOR DATA FOR VALVE / IN LINE INSTRUMENTS / EQUIPMENT.

12 PROJ STD DRG , NO AD-036636 SPOOLS TO BE FABRICATED BY VENDOR

432
6 NIPPLE , CS API 5L-X65Q-PSL2 , SMLS , PE 1 PNPCS3SMPEXSTWE 2
F03
NO.
10-02029-0003 PIECES
MARK NO. SIZE
WEIGHT
LBS
NO.
PIECES
MARK NO. SIZE
WEIGHT
LBS
FLG3 GAS8 BLT9 521-L-1164 , XS , B36.10M , 4" , NACE MR0175/ISO
15156
8
20 7 HEX HEAD PLUG , CS A694-F65 , MNPT , 1 PP3CO8MT00B2024 2
GAS8 BLT9 F04 B16.11 , NACE MR0175/ISO 15156
22
4 1
2 08 81
102 11
6 8
GASKETS
GASKET , 316 SS-FG , SPIRAL WOUND , 1/8" 4 PGG154S9260BL01 5
FW
638398-004-SPL-01 FLG3 GAS8 6 98 STEM UP
CSC
(3.2 MM) THK , 316 SS INNER RING , CS
OUTER RING , CL600 , B16.5 , B16.20
FW

7 BOLTS SPOOLS TO BE FABRICATED BY SAUDI ARAMCO

NO. NO.
MARK NO. SIZE MARK NO. SIZE
9 STUD BOLT (CONT) , CR-MO A193-B7M , W/ 2 7/8 PB1BLDSAD000001 24 PIECES PIECES

2 3
5
42 2 SF HVY HEX NUTS , A194-2HM , DIA
1 4X1"N.B. (IMP) X LEN (IMP) - 152.4 mm Length
5 10 STUD BOLT (CONT) , CR-MO A193-B7M , W/ 2 7/8 PB1BLDSAD000001 8
F02 TAIL U
10
13 SF HVY HEX NUTS , A194-2HM , DIA
3
FLG4 GAS8 BLT10 13 STEM SOUTH (IMP) X LEN (IMP) - 177.8 mm Length

1
11
VALVES / IN-LINE ITEMS
8 S14
20 81 FW
13 102 FR05-B-490-250-250-0-C-1 11 11 PLUG VALVE , CS A216-WCB , CL600 , RF ,
B16.5 , B16.10 REG , LUBR , API 599 ,
4 PVPC2S60RF7B82C 1
4"N.B.
F01
STEM SOUTH 98 BC , TAPERED PLUG , ALLOY 825
FW REFERENCE DRAWINGS

12
STELLITE HF , NACE MR0175/ISO 15156 ,
FLG3 GAS8 BLT9
2
2 DRAWING CONTROL SHEET FOR J.O. 10-02029-0003 TD-896993
INVERTED PRESS BALANCE , GO
7 4X1"N.B. 12 BLIND FLG , CS A105N , CL600 , RF , 4 PFBC1B60RF0002A 1 PIPING PLAN TA-527464

2
B16.5 , NACE MR0175/ISO 15156 P&ID TA-527401.002 0F2
6
7
13 GATE VALVE , CS A105N , CL800 , T/SW , 1 PVGC1B80TSE1XNA 2 LINE DESIGNATION TABLE TD-527394.103
B16.11 , MFR DIMS , API 602, OS&Y , HYDROSTATIC TEST DIAGRAM TA-638440
FOR CONT. SEE
BB , STD PORT , SLD WDG , ALLOY 825
SHT 002 PROJECT PIPING MATERIAL SPECIFICATION TE-727826
TRIM W/ STELLITE HF ST , FG PACKING ,
E 303142429
8
NACE MR0175/ISO 15156 , HW PIPE SUPPORT STANDARD TE-728359
N 2683736646 0F2
EL +100698
PIPE SUPPORTS

9
14 'T' POST 4 FR05-B-490-250-250-0-C-1 1

PIECE MARKS REVISION VALIDATION

2 3 THIS REVISION NO. 0F2 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

10-02029-0003-001

DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER

(DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)
ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

AAJ VKP
11/25/2019 11/25/2019
REV.NO. DATE REVISION DESCRIPTION

0F2 11/25/2019 RE-ISSUED FOR CONSTRUCTION

JOB ORDER/EWO NO.

THIS REVISION IS NOT TO BE USED FOR
10-02029-0003 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

DRAWING TYPE
ISO 4"-BD-1166-6CS2P06_02 ISO
HARADH GAS COMPRESSION PLANT-2
DESIGN OPERATING TEST PRESS. TEST RADIOGRAPHY % INSULATION TRACING PAINTING STRESS LINE ID
CHEMICAL
CLEANING TEMP. PRESS. TEMP. PRESS. (PSIG) MEDIUM SHOP FIELD THK. TYPE SYS NO. HARADH GCP-2
(DEG. F) (PSIG) (DEG. F) (INCH.) SAUDI ARABIA
(PSIG) HARADH
0F2 PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

NO 230 1200 0-110 5-55 NOTE-12 WATER NOTE 16 NOTE 16 N/A N/A NO NOTE 15 - BD-1166
521 L TB-638398 004 0F2
Saudi Aramco 2825 ENG. (05/05)

RESTRICTED SMART CADD-03