T176350001P00
T176350001P00
T176350001P00
N
AWAY AWAY
Remark: Shop Weld CONSTRUCTION-NOTES AND DETAILS FOR ISOMETRIC PIPING
INSULATION DETAILS FOR HOT PIPING
AD-036627
AA-036911
2. PIPING DETAILS SHALL BE CUT AT ALL POINTS MARKED F.W. (FIELD WELD).
1 PIPE , ALLOY 825 B423-N08825 C.D. ANN. , 2 PPPNNKSMBE40S2R 1.5 M 3. EACH FABRICATED SECTION SHALL BE CLEARLY MARKED WITH ITS CODE NUMBER.
MR0175/ISO 15156 5. FABRICATION SHALL BE IN ACCORDANCE WITH SAUDI ARAMCO SPECIFICATION 01-SAMSS-10.
6. GASKET ALLOWANCE
7. PIPING MATERIAL IS
FITTINGS
2 RED. TEE , ALLOY 825 B366-WPNICMC-S 2X1 PRTNNASMBE40S22 1 PIPE SIZE SCHEDULE SPECIFICATION
ANNEALED , SMLS , BE , SCH 40S , REF MTO REF MTO REF MTO
XS , B16.5 , NACE MR0175/ISO 15156 10. ALL PIPING MATERIAL IS IN ACCORDANCE WITH SAUDI ARAMCO ENGINEERING SPECIFICATION
5 WN FLG , ALLOY 825 B564-N08825 ANNEALED 2 PFWNNU60RF40S2A 4 SAES-L-105 CLASS 6NS0P02 . ALL EXCEPTIONS ARE NOTED ON THE ISOMETRIC.
N/A
176350-001-SPL-02 , CL600 , RF , SCH 40S , B16.5 , NACE
MR0175/ISO 15156
11. INSULATION SHOWN ON DRAWING
13. FOR SMALL BORE LINES (UPTO 1-1/2" ) DIMENSIONS, ROUTING & SUPPORTING SHALL BE FIELD ADJUSTED.
15. PAINTING / COATING SHALL BE AS PER TB-223080 FOR HARADH AND TB-843596 FOR HAWAIYAH.
GASKETS 16. WELDS SHALL BE RADIOGRAPHED AS PER SAES-W-011.
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL, OR IN PART, SHALL BE OBTAINED FROM THIS DRAWING WITHOUT THE WRITTEN CONSENT OF SAUDI ARAMCO.
FOR CONT. SEE
SHT 002 293
F04 ALLOY 825 CORE, NOMEX SLEEVES w/G3
FLG5 GAS9 BLT10 WASHERS , FLAT RING , 1/4" (6.4 MM) HOLDS:
1. CERTIFIED VENDOR DATA FOR VALVE / IN LINE INSTRUMENTS / EQUIPMENT.
143 2 FR03-B-721-300-105-B-1
2X1"N.B. FIELD MATERIALS
292
4
11 36 PT N.B.
5
STEM UP NO DESCRIPTION (INS) STOCK CODE QTY
7 1 19
1
F03
FITTINGS
FW FLG5 GAS9 BLT10
FW 7 NIPPLE , ALLOY 825 B423-N08825 C.D. ANN. 1 PNPNNKSMPE80S2R 1
50
F02
, SMLS , PE , SCH 80S , B36.19M ,
8 FLG5 GAS9 BLT10
100 NACE MR0175/ISO 15156
8 HEX HEAD PLUG , ALLOY 825 B564-N08825 1 PP3NNUMT00B2024 1 SPOOLS TO BE FABRICATED BY SAUDI ARAMCO
3 ANNEALED , MNPT , B16.11 , NACE
99 NO.
MARK NO. SIZE
NO.
MARK NO. SIZE
1 PIECES PIECES
MR0175/ISO 15156
12 11
7
STEM EAST
3
STEM UP GASKETS
20X2"N.B.
CLASS: 9 GASKET , ALLOY 825-FG , SPIRAL WOUND , 2 PGG1F3SF560BL01 3
6CS2P06_02 80 1/8" (3.2 MM) THK , ALLOY 825 INNER
9 F01
2 2"N.B. 1 10 STUD BOLT (CONT) , CR-MO A193-B7M , W/ 2
SF HVY HEX NUTS , A194-2HM , B1.1 -
5/8 PB1BLDSADS10000 32 REFERENCE DRAWINGS
FLG5 GAS6 BLT10 DRAWING CONTROL SHEET FOR J.O.
114.3 mm Length 10-02029-0003 TD-896993
PIPING PLAN TA-527464
3
EL +100911 VALVES / IN-LINE ITEMS P&ID TA-527401.002
FOR CONT. SEE LINE DESIGNATION TABLE TD-527394.103
11 GATE VALVE , ALLOY 825 A494-CU5MCUC , 2 PVGNPJ60RF8AXNA 2
2
P-2340
CL600 , RF , B16.5 , B16.10 DIMS , HYDROSTATIC TEST DIAGRAM TA-638440
E 303146568
N 2683737703 API 600, OS&Y , BB , SLD WDG , ALLOY PROJECT PIPING MATERIAL SPECIFICATION TE-727826
EL +101153 825 TRIM W/ STELLITE HF ST , FG PIPE SUPPORT STANDARD TE-728359
T638599001 PACKING , NACE MR0175/ISO 15156 , HW
12 GATE VALVE , ALLOY 825 B564-N08825 1 PVGNNU80TSE1XNA 1
176350-001-SPL-01 ANNEALED , CL800 , T/SW , B16.11 ,
MFR DIMS , API 602, OS&Y , BB , STD
PORT , SLD WDG , ALLOY 825 TRIM W/
STELLITE HF ST , FG PACKING , NACE REVISION VALIDATION
MR0175/ISO 15156 , HW THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
NO 230 1200 123 195 NOTE-12 WATER NOTE-16 NOTE-16 N/A N/A NO NOTE-15 - P-2360
521 L TB-176350 001 00
Saudi Aramco 2825 ENG. (05/05)