STANDARD DETAIL REFERENCE DRAWINGS

N UP
SHOP MATERIALS
DETAIL OF HEAVY WELDING BOSSES FOR THREADED CONNECTIONS AE-036175
CONSTRUCTION-NOTES AND DETAILS FOR ISOMETRIC PIPING AD-036627
AWAY AWAY
PT NPS
INSULATION DETAILS FOR HOT PIPING AA-036911
NO DESCRIPTION CMDTY CODE (INS) QTY
INSULATION DETAILS FOR COLD PIPING AA-036913
PIPE
INSTALLATION OF JACK SCREWS FOR FLANGED JOINTS AC-036630
1 Pipe A312-TP316/316L Smls BE - Seamless B36.10/ASME B36.19 - I2086556 6 5393 MM
- NACE - - S-10S
TOWARD TOWARD 2 Pipe A312-TP316/316L Smls BE - Seamless B36.10/ASME B36.19 - I2086557 3 6102 MM
- NACE - - S-10S
DOWN
FITTINGS
3 Reducing Tee A403-WP316/316L-S BW - Seamless B16.9 - - - I2093173 6X3 1 NOTES
NACE - S-10S S-10S 1. MATERIAL SHOWN WITH A BROKEN LINE AND SPOOLS LISTED IN THE SAUDI ARAMCO
4 Eccentric Reducer A403-WP316/316L-S BW - Seamless B16.9 - - I2093115 6X3 1 FABRICATION LIST ARE NOT TO BE FURNISHED BY THE VENDOR.
- NACE - S-10S S-10S
2. PIPING DETAILS SHALL BE CUT AT ALL POINTS MARKED F.W. (FIELD WELD).
5 90 Elbow LR A403-WP316/316L-S BW - Seamless B16.9 - - - NACE I2092978 6 3
- S-10S 3. EACH FABRICATED SECTION SHALL BE CLEARLY MARKED WITH ITS CODE NUMBER.

6 90 Elbow LR A403-WP316/316L-S BW - Seamless B16.9 - - - NACE I2092976 3 5 4. UNLESS OTHERWISE NOTED. (A) ALL DIMENSIONS ARE TO C OR FACE OF FLANGES.
- S-10S (B) BOLT HOLES ON FLANGES STRADDLE C . (C) WELDING ELBOWS ARE LONG RADIUS.

5. FABRICATION SHALL BE IN ACCORDANCE WITH SAUDI ARAMCO SPECIFICATION 01-SAMSS-10.

FLANGES
6. GASKET ALLOWANCE
3.2 mm
7 Welding Neck Flange A182-F316/316L RF 150 - B16.5 - - - NACE I2093257 6 3 7. PIPING MATERIAL IS
- S-10S
8 Welding Neck Flange A182-F316/316L RF 150 - B16.5 - - - NACE I2093258 3 4
PIPE SIZE SCHEDULE SPECIFICATION
- S-10S
6" S-10S 1SD0P01
SUPPORTS 3" S-10S 1SD0P01
9 POS-001-LO-15030 - 6 1

10 POS-002-LO-15030 - 3 1
CONN TO
T72-K-0109A/S-435
FIELD MATERIALS
3 in RFFE 150
E 10452570 PT NPS
N 10910152 NO DESCRIPTION CMDTY CODE (INS) QTY
EL +104120 GASKETS 8. WELDING STRESS RELIEF - YES NO
X 10230-00-237-ES-0002
100% X-RAY SPOT X-RAY 01-SAMSS-10 SAES-W-011
11 Spiral Wound Gasket 316L/Graph. 316-CR/316-IR Betw.Flg RF I3979913 6 2
6 150 4.5 mm B16.20 - -
89.8° F8 G12 B15 12 Spiral Wound Gasket 316L/Graph. 316-CR/316-IR Betw.Flg RF I3979911 3 3
9. TESTING SHOP HYDROSTATIC TEST - YES
THE SHOP HYDROSTATIC TEST SHALL BE CARRIED OUT ON PIECES HAVING ALL ENDS
NO
X
EL +104098 150 4.5 mm B16.20 - - FLANGED. HYDROSTATIC TEST PRESSURE

6 42
1 8 BOLTS 10. ALL PIPING MATERIAL IS IN ACCORDANCE WITH SAUDI ARAMCO ENGINEERING SPECIFICATION
87° 57 69
SAES-L-105 CLASS 1SD0P01 .
ALL EXCEPTIONS ARE NOTED ON THE ISOMETRIC.

EL +104068 13 Std Bolt 2Hy Hx Nut A193 B7M/2HM - - Stud Bolts B18.2.1/ 3/4 8
6 FALL 1:19 B18.2.2 Fluoropolymer Coated - - 1422.4 mm Length 11. INSULATION REQUIRED - YES
X NO
THICKNESS 50mm
89.8° PP

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL, OR IN PART, SHALL BE OBTAINED FROM THIS DRAWING WITHOUT THE WRITTEN CONSENT OF SAUDI ARAMCO.
14 Std Bolt 2Hy Hx Nut A193 B7M/2HM - - Stud Bolts B18.2.1/ I3798610 3/4 8 INSULATION SHOWN ON DRAWING

EL +104098 FALL 1:19 B18.2.2 Fluoropolymer Coated - - 114.3 mm Length

<9> 2 15 Std Bolt 2Hy Hx Nut A193 B7M/2HM - - Stud Bolts B18.2.1/ I3798567 5/8 12

501
B18.2.2 Fluoropolymer Coated - - 101.6 mm Length

<8> 2
42 <10> 2
8 69 3"NPS
6 SPOOLS TO BE FABRICATED BY VENDOR
0 2
94 87° CUT PIPE LENGTH
5>
WEIGHT
FALL 1:19 FALL 1:19 NO
PIECES
MARK NO. SIZE WEIGHT
LBS.
NO
PIECES MARK NO. SIZE LBS.
< EL +103567
<6> 2 PIECE LENGTH N.S. REMARKS PIECE LENGTH N.S. REMARKS
6 3"NPS 2 NO (MM) (IN) NO (MM) (IN)
EL +104049 < 7>
F8 G12 B15 S10 <1> 981 6 <2> 2792 6
CONN TO POS-002-LO-15030 <3> 1620 6 <4> 502 3
T72-U-0112A/TP6 3 <5> 712 3 <6> 314 3
6 in RFFE 150 <4> 6X3"NPS
REST + GUIDE <7> 3628 3 <8> 284 3
<9> 348 3 <10> 314 3
E 10446602 E 10447846
2
N 10915122 5 EL +103310 CONN TO
EL +101600 87° T72-K-0109A/S-436
19 06
739

F8 38 3 in RFFE 150
EL +103027 1:
740

LL 47 E 10448746
FA 32 N 10910152 SPOOLS TO BE FABRICATED BY ARAMCO
FA EL +104120
LL 27 F7 G11 B14 232 NO
PIECES
MARK NO. SIZE WEIGHT
LBS.
NO
PIECES MARK NO. SIZE WEIGHT
LBS.
1: 74 F8 G12 B15
19 F7
5 4
1427

<1> 1 89.8° 6X3"NPS

32 EL +103196 39
318 37
1 210 40MM OFFSET
3 7 > FLAT U 3 W
FALL 1:19 19 <3 143

6"NPS 5 <2
>
F7 G11 B13 1
S9
POS-001-LO-15030 12. STRESS SYSTEM No. NR
REST
PATH: TGP\T72\21\ISO\ISO_FAB\21\LO\TR_IsoWbs

REVISION VALIDATION

THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

10-09003-0004-036
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)
ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
AAA WAB WAB RAR
09/01/23 09/01/23 09/01/23 09/01/23
REV.NO. DATE REVISION DESCRIPTION

00 09/01/23 ISSUED FOR CONSTRUCTION

JOB ORDER/EWO NO.

THIS REVISION IS NOT TO BE USED FOR

ISO REVISION AFFECTS PREFABRICATION YES NO

X 10-09003-0004 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

DRAWING TYPE

ISO 6"-LO-15030-1SD0P01 ISO

NGL Recovery Trains - Train 1

NGL RECOVERY UNITS
TANAJIB SAUDI ARABIA
PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.
00 09/01/23 ISSUED FOR CONSTRUCTION JCC IBP RLH MAP
- THIS ISOMETRIC ROUTING AND MATERIAL, APPLY FOR PREFABRICATION OF TRAINS 01/02/03.
REV DATE DESCRIPTION DRAWN CHECKED STRESS APPROVED T72 L CB-270328 001 00
- IN ALL THE SMALL BORE BRANCH CONNECTIONS WITH A BIG BORE PIPELINE A PS80 WILL BE INSTALLED
Saudi Aramco 2825 ENG. (05/05)
CWP Nº T72-022-AG T72-LO-15030-001
Extraction Date: 8/24/2023 1:33:13 AM
SMART CADD-03