actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 1

Free Questions for 220-1101

Shared by Mcintyre on 12-12-2023
For More Free Questions and Preparation Resources

Check the Links on Last Page

 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 2

Question 1
Question Type: MultipleChoice

Which of the following network types is used for pairing a Bluetooth device to a smartphone?

Options:
A- PAN
B- WAN
C- LAN
D- MAN

Answer:
A

Explanation:
A PAN, or Personal Area Network, is the network type that is used for pairing a Bluetooth device
to a smartphone. A PAN is a network that connects personal devices, such as phones, tablets,
laptops, headphones, speakers, or printers, over a short distance, usually less than 10 meters or
33 feet. A PAN can use wireless technologies, such as Bluetooth, Wi-Fi, or infrared, to enable
communication and data exchange between the devices. A Bluetooth PAN, also known as a
piconet, can consist of up to eight devices, one of which acts as the master and the others as
slaves. The master device initiates the pairing process with the other devices and controls the
data transmission. The devices use radio waves in the 2.4 GHz frequency band to communicate
with each other. Bluetooth is a low-power, low-cost, and secure technology that is widely used for
creating PANs.

What Is Bluetooth Wireless Networking?1

Bluetooth - GeeksforGeeks2

Bluetooth | Institute of Physics3

6 Different Types of Bluetooth Devices - TechJeny4

Question 2
Question Type: MultipleChoice
 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 3

A user's mobile device can back up classified files to an external hard drive at work but cannot
save pictures to an external drive at home. Which of the following is most likely the issue?

Options:
A- The pictures do not have a classification flag set.
B- The drive permissions are insufficient.
C- Peripherals are managed via MDM.
D- Drivers are incorrectly installed.

Answer:
C

Explanation:
The most likely issue that prevents the user's mobile device from saving pictures to an external
drive at home is that the peripherals are managed via MDM (mobile device management). MDM
is a software solution that allows an organization to remotely control, secure, and enforce policies
on mobile devices, such as smartphones, tablets, or laptops. MDM can also restrict the access
and functionality of the peripherals, such as external drives, cameras, microphones, or printers,
that are connected to the mobile devices.

One of the possible reasons why the user's mobile device can back up classified files to an
external hard drive at work but not save pictures to an external drive at home is that the MDM
policy allows only authorized peripherals to be used with the mobile device. For example, the
MDM policy may require the external drive to have a certain encryption level, a specific serial
number, or a valid certificate to be recognized by the mobile device. The external drive at work
may meet these criteria, while the external drive at home may not. Therefore, the mobile device
can back up the classified files to the external drive at work, but it cannot save the pictures to
the external drive at home.

To resolve this issue, the user may need to contact the IT administrator or the MDM provider and
request permission to use the external drive at home. Alternatively, the user may need to use a
different method to transfer the pictures from the mobile device to the external drive, such as
using a cloud service, a wireless network, or a USB cable.

What is Mobile Device Management (MDM)?1

How to Manage Mobile Devices With MDM2

How to Connect an External Hard Drive to Your Phone3

 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 4

Question 3
Question Type: MultipleChoice

Laura, a customer, has instructed you to configure her home office wireless access point.

She plans to use the wireless network for finances and has requested that the network be setup
with the highest encryption possible.

Additionally, Laura knows that her neighbors have wireless networks and wants to ensure that
her network is not being interfered with by the other networks.

She requests that the default settings be changed to the following.

Wireless Name: HomeWiFi

Shared Key: CompTIA

Router Password: Secure$1

Finally, Laura wants to ensure that only her laptop and Smartphone can connect to the network.

Laptop: IP Address 192.168.1.100

Hardware Address: 00:0A:BF:03:C4:54

Smartphone: IP Address 192.168.1.101

Hardware Address: 09:2C:D0:22:3F:11

INSTRUCTIONS

Configure Laura's wireless network using the network adapter window.

If at any time you would like to bring back the initial state of the situation, please click the Reset
All button.
actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 5
 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 6

Options:
A- See the explanation below

Answer:
A
 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 7

Explanation:
solution as
actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 8
 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 9

Question 4
Question Type: MultipleChoice

A technician recently reinstalled a previously virtualized application directly to a user's computer.

Now, the application is not launching. Which of the following did the technician most likely do to
cause this issue?

Options:
A- Installed the software on the base operating system.
B- Installed the wrong license type.
C- Installed the application with administrator rights.
D- Reset the user's application virtualization session.
 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 10

Answer:
A

Explanation:
If an application was previously running in a virtualized environment and is not launching after
being installed directly on the base operating system, it's possible that the technician did not
account for dependencies or configurations specific to the virtualized environment that are not
present or are incompatible with the base operating system. This mismatch can prevent the
application from launching properly.

CompTIA A+ Core 1 Exam Objectives Section 4.0: Virtualization and Cloud Computing

CompTIA A+ Core 1 Exam Objectives Section 5.0: Hardware and Network Troubleshooting

Question 5
Question Type: MultipleChoice

A user keeps a company-provided camera's battery charger plugged into a docking station at a
desk. Company policy requires that USB devices be identified and approved by

installed peripheral security software. A technician is unable to add a unique identifier to the
battery charger's security software. Which of the following should the technician do?

Options:
A- Provide a USB to AC adapter for the battery charger.
B- Add a powered USB hub to the docking station.
C- Disable the peripheral security software for this user only.
D- Replace the battery charger with a USB device that has a unique identifier.

Answer:
A

Explanation:
The problem in this scenario is that the battery charger is not a USB device, but a device that
plugs into a USB port to draw power. Therefore, it does not have a unique identifier that can be
recognized by the peripheral security software, which is designed to prevent unauthorized USB
 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 11

devices from accessing the company's network or dat

a. The security software cannot add the battery charger to its whitelist, and may block its power
supply or generate alerts.

The best solution for this problem is to provide a USB to AC adapter for the battery charger,
which is a device that converts the USB power output to an AC power input that can be plugged
into a wall outlet. This way, the battery charger does not need to connect to the docking station
or the computer, and does not trigger the peripheral security software. The user can still charge
the camera's battery without compromising the company's security policy.

The other options are not advisable because they either do not solve the problem or create new
risks. Option B, adding a powered USB hub to the docking station, may not work if the security
software also monitors the hub's ports and detects the battery charger as an unknown device.
Option C, disabling the peripheral security software for this user only, is a very bad idea because
it exposes the user's computer and the company's network to potential attacks from malicious
USB devices. Option D, replacing the battery charger with a USB device that has a unique
identifier, is unnecessary and costly, and may not be compatible with the camera's battery.

CompTIA A+ Core 1 (220-1101) Certification Study Guide, Chapter 9: Security, Section 9.3:
Device Security, Page 419

CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) Pearson uCertify Course and Labs and
Textbook Bundle, Chapter 9: Security, Section 9.3: Device Security, Page 420

CompTIA A+ Core 1 (220-1101) and Core 2 (220-1102) Exam Cram, Chapter 9: Security, Section
9.3: Device Security, Page 402

Question 6
Question Type: MultipleChoice

Which of the following network devices is needed to direct packets to networks outside of the
LAN?

Options:
A- Hub
B- Switch
C- Router
D- Bridge
 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 12

Answer:
C

Explanation:
Routers are designed to connect multiple networks and direct packets to their intended
destinations across network segments. This makes them essential for directing packets to
networks outside of the LAN, such as the internet or other remote networks.

CompTIA A+ Core 1 Exam Objectives Section 2.2: Compare and contrast common networking
hardware.
 actualtestdumps CompTIA 220-1101 EXAM DUMPS BY Mcintyre 12-12-2023 6QA - Page 13

To Get Premium Files for 220-1101 Visit

https://www.p2pexams.com/products/220-1101

For More Free Questions Visit

https://www.p2pexams.com/comptia/pdf/220-1101