tools f50

STORK
Fokker70/100
ILLUSTRATED TOOL AND
EQUIPMENT MANUAL
Fokker Services B.V.

Nieuw-Vennep
The Netherlands
All rights reserved by Fokker Services B.V.,(The Netherlands). This document has been supplied by Fokker Services B.V. to its customer
on a confidential basis subject to the provisions of an agreement. Reproduction or disclosure to third parties of this document or any part
thereof, or the use of any information contained therein for purposes other than explicitly allowed by the aforesaid agreement, is not
permitted except with the prior written permission of Fokker Services B.V..
AUG 01/99
FOKKER 70/100
ILLUSTRATED TOOL AND EQUIPMENT MANUAL
RECORD OF REVISIONS
After a Revision has been put into this manual, record in the table.
Revision number, Date of Issue, Initials of the person who put in the revision and the date of doing the
revision.
Rev. Date of Put In By Date Rev. Date of Put In By Date

Number Issue Number Issue
001 DEC 01/86 FOKKER JUL 01/86 024 SEP 01/04 FOKKER SEP 01/04
002 MAR 01/87 FOKKER MAR 01/87 025 SEP 01/06 FOKKER SEP 01/06
003 JUN 01/87 FOKKER JUN 01/87 026 NOV 01/09 FOKKER NOV 01/09
004 SEP 01/87 FOKKER SEP 01/87 027 MAY 01/11 FOKKER MAY 01/11
005 DEC 01/87 FOKKER DEC 01/87
006 JUN 01/88 FOKKER JUN 01/88
012 SEP 01/91 FOKKER SEP 01/91
013 MAR 01/92 FOKKER MAR 01/92
019 MAR 01/95 FOKKER MAR 01/95
020 AUG 01/98 FOKKER AUG 01/98
Page 1
RECORD OF REVISIONS
FOKKER70/100
RECORD OF TEMPORARY REVISIONS
After insertion of a Temporary Revision in this manual, fill in the table.

Below by noting down: Revision number, Date of Issue, Initials of the person
who inserted the revision and the date of this action.
After a removal of a Temporary Revision from this manual, complete the table
below by noting down the initials of the person who removed the Revision and
the date of this action.
TEMP. DATE OF INSERTED BY DATE REMOVED BY DATE

REVISION ISSUE
NUMBER
31-001 SEP 15/02 FOKKER SEP 15/02 FOKKER AUG 01/03
RECORD OF TEMPORARY REVISIONS PAGE 1

FOKKER 70/100
TRANSMITTAL LETTER
REVISION NUMBER : 027

REVISION DATE : MAY 01/11
PREVIOUS REVISION DATE : NOV 01/09
To all holders of this Manual.

Enclosed is the revision that replaces all previous revisions.
This revision is issued with revised and new data.
For any questions and or remarks with respect to the issue of the product please contact:
Fokker Services BV
Technical Services
Maintenance & Documentation
PO Box 231
2150 AE Nieuw-Vennep
The Netherlands
Telephone : +31 (0) 252 627350

Fax : +31 (0) 252 627211
E-mail : technicalservices@fokker.com
Page 1
TRANSMITTAL LETTER MAY 01/11
FOKKER 70/100
HIGHLIGHTS

DATE : MAY 01/11
The following list details the pages affected by this revision and the reason for change.
CHAPTER (AND FIG) PAGE REASON FOR CHANGE
LIST OF CHAPTERS 1/2 Updated.

LEP INTRODUCTION 1/2 Updated.
INTRODUCTION 5/6 Reference to Myfokkerfleet.com added for PCR form.
E-mail address of Fokker Services added.
LEP NUMERICAL INDEX 1/2 Updated.
NUMERICAL INDEX 1 thru 13 Updated.
LEP CHAPTER 24 1/2 Updated.

24 CONTENTS 1/2 Tool part number 28-0-6090 added.
24-11-01 405/406 Tool part number 28-0-6090 added.
LEP CHAPTER 28 1/2 Updated.

28 CONTENTS 1/2 Updated.
28-00-00 201 Part description updated.
28-00-00 205/206 Part description updated.
28-20-00 501/502 Tool part number F28-FTM-R020-023 added.
28-20-00 509/510 Tool part number W98841-001 added.
Page 1
HIGHLIGHTS MAY 01/11
FOKKER 70/100
LIST OF CHAPTERS
OPERATOR : ALL
ATA CHAPTER DATE R ATA CHAPTER DATE R
NR E NR E
V V
TITLE PAGE AUG 01/99 55 STABILIZERS SEP 01/94
RECORD OF REVISIONS 57 WING SEP 01/94
RECORD OF TEMPORARY 71 POWERPLANT SEP 01/04
REVISIONS 72 ENGINE SEP 01/06
LIST OF CHAPTERS MAY 01/11 R 73 ENGINE FUEL CONTROL SEP 01/94
INTRODUCTION MAY 01/11 R 75 AIR SEP 01/94
NUMERICAL INDEX MAY 01/11 R 76 ENGINE CONTROLS SEP 01/06
LIST OF VENDORS NOV 01/09 77 ENGINE INDICATING SEP 01/94
TOOL AND EQUIPMENT MAR 01/95 78 EXHAUST SEP 01/94
SERVICE BULLETINS INDEX
05 TIME LIMITS/ AUG 01/98
MAINTENANCE CHECKS
07 LIFTING AND SHORING SEP 01/94
08 LEVELING AND WEIGHING SEP 01/94
09 TOWING AND TAXIING SEP 01/94
10 PARKING, MOORING, AUG 01/03
STORAGE AND RETURN TO
SERVICE
12 SERVICING MAR 01/95
20 STANDARD PRACTICES NOV 01/09
- AIRFRAME
21 AIR CONDITIONING NOV 01/09
22 AUTOFLIGHT SEP 01/06
23 COMMUNICATIONS AUG 01/03
24 ELECTRICAL POWER MAY 01/11 R
25 EQUIPMENT/FURNISHING NOV 01/09
26 FIRE PROTECTION SEP 01/04
27 FLIGHT CONTROLS NOV 01/09
28 FUEL MAY 01/11 R
29 HYDRAULIC POWER NOV 01/09
30 ICE AND RAIN PROTECTION AUG 01/03
31 INDICATING/RECORDING AUG 01/03
SYSTEMS
32 LANDING GEAR NOV 01/09
33 LIGHTS SEP 01/06
34 NAVIGATION AUG 01/99
35 OXYGEN SEP 01/94
36 PNEUMATICS SEP 01/94
38 WATER WASTE SEP 01/94
49 AIRBORNE AUXILIARY NOV 01/09
POWER
51 STANDARD PRACTICES AND SEP 01/94
STRUCTURES
52 DOORS SEP 01/06
54 NACELLES/PYLONS SEP 01/94
Page 1/2
LIST OF CHAPTERS MAY 01/11
FOKKER 70/100
LIST OF EFFECTIVE PAGES
THIS CHAPTER CONSISTS OF THE FOLLOWING PAGES
CHAPTER PAGE C DATE R CHAPTER PAGE C DATE R

SECTION O E SECTION O E
SUBJECT D V SUBJECT D V
E E
LEP 1/2 MAY 01/11 R

INTRODUCTION 1 AUG 01/99
INTRODUCTION 5/6 MAY 01/11 R
Page 1/2
LEP INTRODUCTION MAY 01/11
FOKKER 70/100
VEND Vendor
13.Changes to this Manual
Specific requests for alteration to the TEM can be sent on the Publication
Change Request form (Refer to Myfokkerfleet.com, Documentation Center for
more data).
If you have any general comments or requests for changing or improving this
manual, please send these to:
Fokker Services BV
Technical Services
Maintenance & Documentation
PO Box 231
2150 AE Nieuw-Vennep
The Netherlands
Telephone : +31 (0) 252 627350
Fax : +31 (0) 252 627211
E-mail : technicalservices@fokker.com
Page 5/6
INTRODUCTION MAY 01/11
FOKKER 70/100

E E
LEP 1/2 MAY 01/11 R

NUMERICAL 1 MAY 01/11 R
INDEX
INDEX
INDEX
INDEX
INDEX
INDEX
INDEX
INDEX
INDEX
INDEX
INDEX
INDEX
INDEX
Page 1/2
LEP NUMERICAL INDEX MAY 01/11
FOKKER 100/70
NUMERICAL INDEX
PART NUMBER KEYWORD / PART DESCRIPTION CH-SE-SU PAG VEND MAN
01-1236-0000 TOWBAR - SPECIAL PURPOSE 09-10-00 203 59603 AMM

0206KAQ-01 KIT - ACCESSORY LB VERSION 28-41-00 502 K5294 AMM
0207KAQ-01 KIT - ACCESSORY KG VERSION 28-41-00 502 K5294 AMM
0215KAQ-01 KIT - ACCESSORY ICT 28-41-00 502 K5294 AMM
0501750-4 PROP BLOCK - CABLE TENSION 27-11-00 201 45402 AMM
REGULATOR AILERON
0501750-7 PROP BLOCK - CABLE TENSION 27-31-00 201 45402 AMM
REGULATOR ELEVATOR
0560-0490 TEST SET - SMOKE DETECTOR EJECTOR 26-13-00 502 #T263 AMM
0602KQC03 TEST BOX - FUEL QUANTITY SYSTEM 28-41-00 502 K5294 AMM
101-003 TEST SET - RVDT ADJUSTMENT 110 VAC 22-11-04 501 #E114 AMM
101-004 TEST SET - RVDT ADJUSTMENT 220 VAC 22-11-04 502 #E114 AMM
1013714 SOCKET - WRENCH 71-00-00 512 K0680 AMM
1098I PLIERS - INSTALLATION, FLAP FLEXIBLE 27-53-04 401 S3909 AMM
DRIVE SHAFT
1099I PLIERS - INSTALLATION, FLAP FLEXIBLE 27-53-04 401 S3909 AMM
DRIVE SHAFT
17TE165 TEST SET - FLIGHT DATA RECORDER 22-11-03 402 06141 AMM
17TES0010 TEST SET - FLIGHT DATA RECORDER, 22-11-03 403 06141 AMM
SOLID STATE
17TES0043 TEST SET - FLIGHT DATA RECORDER, 22-11-03 404 06141 AMM
SOLID STATE
1991 GUN - OIL REPLENISHING, ENGINE, I.D.G. & 12-13-02 301 K6057 AMM
APU OIL
200548001A SHACKLE - MOORING 10-10-00 201 K0654 AMM
209352 SPANNER - INLET VALVE 28-13-02 401 F0553 AMM
2219T01 TOOL - SWAGING, CAPTIVE SCREW 51-90-00 402 D0680 AMM
2219S01-2BP
27-1-3568 ADAPTER - TORQUE, FIRE WIRE 26-12-02 401 AMM
CONNECTIONS
27-1-3658 ADAPTER - TORQUE LOCKNUT 52-12-04 401 CMM
27-1-3663 ADAPTER - TORQUE LOCKNUT 52-12-04 402 CMM
27-1-3695 MAGNET - TEST, FIRE BOTTLE PRESSURE 26-21-00 501 AMM
SWITCH
27-1-3754 TEST SET - SMOKE DETECTOR 26-13-00 501 AMM
27-1-3983 TEST BOX - CURRENT SENSOR 30-31-02 101 AMM
27-1-4051 BOARD - CONTROL WHEEL RIGGING 27-11-01 402 H7009 AMM
27-1-4253 TEST SET - DIFFERENTIAL PRESSURE 21-23-03 501 AMM
AVIONICS AND CABIN RECIRC. FILTER
27-1-4287 TOOL BOX - ELECTRICIAN 20-00-00 002 AMM
27-1-4441 CONTRLLR - AIR PRESSURE 28-91-01 501 AMM
27-1-4496 TEST BOX - TEMPERATURE CONTROL UNIT, 30-41-00 501 AMM
WINDSHIELD
2760A LOADER - DATA, CASSETTE TYPE 34-61-00 201 6S097 AMM
28-0-0300H TEST SET - BLEED AIR DUCTING 36-11-00 502 AMM
28-0-0500F TEST SET - ANTI ICING DUCT LEAKAGE 30-12-06 401 AMM
28-0-1066D JACKPAD - WING 07-11-00 205 AMM
28-0-1067H ADAPTER - FUSELAGE JACK, FRONT 07-11-00 208 AMM
28-0-1073J SLING - RUDDER HOISTING 27-20-00 404 AMM
Page 1
NUMERICAL INDEX MAY 01/11
FOKKER 100/70
NUMERICAL INDEX
28-0-1120 TRESTLE - FUSELAGE 51-90-00 401 AMM

28-0-1219G BAR - SPEEDBRAKE GROUND LOCK 27-20-00 401 AMM
28-0-1233 PIN - GROUND LOCK, MAIN AND NOSE GEAR 10-11-00 201 AMM
28-0-1268N CONTRLLR - AIR SUPPLY 29-00-00 201 AMM
28-0-1270D FIXTURE - MAIN WHEEL ALIGNMENT 51-90-01 601 AMM
28-0-1274K TEST SET - PNEUMATIC VALVE 21-21-01 504 AMM
28-0-1327C ADAPTER - TORQUE, ANTI-ICING DUCT 30-12-06 501 AMM
CONNECTION
28-0-1331K BOARD - RUDDER RIGGING 27-20-00 402 AMM
28-0-1352 PIN - HINGE MOUNTING, HORIZONTAL 27-40-00 402 AMM
STABILIZER
28-0-1363C FIXTURE - HOISTING, HORIZONTAL STAB. 27-42-01 402 AMM
CONTROL UNIT
28-0-1374 PULLER - ATTACHMENT PIN, MAIN GEAR 32-11-02 401 AMM
SIDE STAY
28-0-1380F ADAPTER - NOSE WHEEL AXLE NUT TRQ 32-21-01 402 AMM
28-0-1381E ADAPTER - MAIN WHEEL AXLE NUT TRQ 32-11-01 404 AMM
28-0-1390H TOOL - ALIGNMENT, ANGLE OF ATTACK 27-35-00 502 AMM
TRANSDUCER
28-0-1390J TOOL - ALIGNMENT, ANGLE OF ATTACK 27-35-00 504 AMM
TRANSDUCER
28-0-1404D ADAPTER - TORQUE, HYDRAULIC PUMP 29-11-01 401 AMM
ATTACHMENT BOLTS
28-0-1421H LEVER - PLUNGER UNLOCKING, NOSE 32-21-01 401 AMM
GEAR DOWNLOCK
28-0-1425A TOOL - INSTALLATION 29-11-01 402 D5513 AMM
28-0-1442E SET - SPANNER, CARGO DOORS HOOK 52-91-01 201 00198 AMM
FITTINGS
28-0-1455F TOOL - ADJUSTMENT, MAIN GEAR ALT EXT 32-31-04 402 AMM
CTRL SYS
28-0-1463E DOLLY - LANDING GEAR superseded
by
28-0-5260
28-0-1476D COVER - FLAP TRAILING EDGE 10-11-00 218 AMM
28-0-1482B PLUG - CROSSFEED VALVE DE-ACTIVATION 28-00-00 201 AMM
28-0-1482C PLUG - CROSSFEED VALVE DE-ACTIVATION 28-00-00 202 AMM
28-0-1482D PLUG - CROSSFEED VALVE DE-ACTIVATION 28-00-00 203 AMM
28-0-1482E PLUG - CROSSFEED VALVE DE-ACTIVATION 28-00-00 204 AMM
28-0-1504D PULLER - HINGE BOLT, HORIZONTAL 27-40-00 401 AMM
STABILIZER
28-0-1569C CAN - FLAP MAIN GEARBOX OIL 12-21-01 304 AMM
28-0-1604 FIXTURE - PLUMBLINE 08-30-00 201 AMM
28-0-1614C CART - NITROGEN CHARGING 12-14-01 301 AMM
28-0-1618E CART - HYDRAULIC TEST 32-22-00 501 AMM
28-0-1643D TEST SET - THERMO SWITCHES 36-11-00 501 AMM
28-0-1707 PLUG - COVERING, ALT- AND PRESS. CABIN 10-11-00 202 AMM
STATIC PORT
28-0-1738C WINCH - PORTABLE 07-12-00 202 K1425 AMM
Page 2
FOKKER 100/70
NUMERICAL INDEX
28-0-1761C SET - SPANNER, PASSENGER DOOR LATCH 52-11-00 501 AMM

FITTINGS
28-0-1763D ADAPTER - FLAP ATTACHMENT NUT TRQ 27-50-01 401 AMM
28-0-1765C CLAMP - INSTALLATION, PERI SEAL 36-12-03 401 AMM
CONNECTORS
28-0-1785C HOSE - FUEL SYSTEM DRAIN 28-16-11 401 AMM
28-0-1787B FIXTURE - ALIGNMENT 51-90-00 601 AMM
28-0-1788D FIXTURE - WING ALIGNMENT, STA 2733-3198 51-90-00 602 AMM
28-0-1789D FIXTURE - WING ALIGNMENT, STA 10470- 51-90-00 603 AMM
11110
28-0-1806G ADAPTER - ACTUATOR LOCK NUT TORQUE, 32-31-04 401 AMM
MG DOOR UPLOCK
28-0-1827C TOOL - FIXATION, HORIZONTAL STABILIZER 27-41-04 401 AMM
28-0-1837G TEST SET - BRAKE BLEEDING AND TEST 32-44-00 501 AMM
28-0-1851D GAUGE - SETTING 27-66-00 201 AMM
28-0-1859B LOCK - SAFETY, MAIN GEAR INBOARD 32-32-09 501 AMM
DOORS
28-0-1881B SPANNER - MICRO SWITCHES 32-11-01 410 AMM
28-0-1882B SET - SPANNER 32-12-01 401 AMM
28-0-1886C SPANNER - INSTALLATION, HYDRAULIC 29-34-01 401 AMM
PRESSURE SWITCHES
28-0-1933C CLAMP - INSTALL, PERI SEAL HOUSING 21-51-00 401 AMM
28-0-1950C KIT - ACCUMULATOR CHARGING 12-14-01 302 AMM
28-0-1978A JAR - FUEL DRAIN 12-11-03 301 AMM
28-0-1980 BOARD - ELEVATOR RIGGING 27-30-00 501 AMM
28-0-1999 SET – PUSH PULL GAUGE 22-41-00 102 AMM
28-0-2038D KIT - SERVICING, LANDING GEAR STRUTS 32-11-00 601 AMM
28-0-2055 SET - FLIGHT CONTROLS FEELER 27-50-01 502 AMM
28-0-2066 TOOL - FLARING 36-90-01 201 AMM
28-0-2067B TOOL - SWITCH ADJUSTMENT, NOSE GEAR 32-61-01 501 AMM
DOWNLOCK
28-0-2069 SET - SPANNER, CENTERWING TANK 28-41-02 401 AMM
28-0-2074 SPANNER - ADJUSTMENT 27-93-02 401 AMM
28-0-2077B SLING - HOISTING, HORIZONTAL 27-42-01 401 AMM
STABILIZER CONTROL UNIT
28-0-2085B TOOL - FLARING, INNER BLEED AIR DUCTS 36-90-01 202 AMM
28-0-2104 FIXATION TOOL - ELEVATORS 27-31-03 401 AMM
28-0-2119D TEST SET - HYDRAULIC RESERVOIR 29-00-03 302 AMM
28-0-2138 PULLER - ACTUATOR MOUNTING PIN, 27-61-02 401 AMM
SPEEDBRAKE
Page 3
FOKKER 100/70
NUMERICAL INDEX
28-0-2151B TOOL - SELECTOR VALVE ADJUSTMENT, 32-31-03 401 AMM

LANDING GEAR
28-0-2158B TOOL - DUMP VALVE ADJUSTMENT 32-32-02 401 AMM
28-0-2164 SPANNER - CENTERWING TANK MANIFOLD 28-90-01 401 AMM
28-0-2197 CABLE - TEST, VALVE MOTOR 28-90-01 501 AMM
CENTERWING TANK
28-0-2199 TOOL - ACCUMULATOR DRAIN 29-00-03 301 AMM
28-0-2210A ADAPTER - TORQUE, HYDRAULIC 29-90-01 401 AMM
ACCUMULATOR END CAP
28-0-2215B PULLER - SUPPORT ASSEMBLY BUSHING, 27-90-01 201 AMM
SPEEDBRAKE
28-0-2256 PULLER - BEARINGS, PASSENGER DOOR 52-11-05 401 AMM
LOCKING BAR
28-0-2320 TOOL - CONCENTRICITY CHECKING, FLAP 27-53-01 601 AMM
SPINDLES
28-0-2323B ADAPTER - UPSTOP DAMPER TORQUE, 32-11-05 401 AMM
MAIN GEAR
28-0-2327D PULLER - MAIN GEAR HINGE PIN 32-11-01 401 AMM
28-0-2333C TEST SET - CABIN PRESSURE 21-31-00 502 AMM
28-0-2336 TOOL - BRACKET ADJUSTMENT, MAIN GEAR 32-11-01 402 AMM
UPPER SWIVEL
28-0-2367 SPANNER - ECCENTRIC SPINDLE 27-93-01 501 AMM
ASSEMBLY
28-0-2403D SET - REAMER, VARIOUS DOOR HINGES 52-90-01 801 AMM
28-0-2442B SET - SPANNER, REAR CARGO DOOR 52-91-01 202 AMM
LATCH FITTINGS
28-0-2490A TOOL - ACTUATOR ADJUSTMENT 32-22-00 401 AMM
28-0-2493 COVER - PITOT 10-11-00 203 AMM
28-0-2567 TOOL - BEARING CHECKING, HORIZONTAL 55-90-00 501 AMM
STABILIZER
28-0-2594A TOOL - SERVO VALVE STICKING SIM, 27-32-01 401 AMM
ELEVATOR
28-0-2609 TORQUE ADAPTER - HORIZONTAL STAB 27-40-00 403 AMM
28-0-2624 TOOL - ADJUSTMENT, OVERCENTER LINK 52-31-02 501 AMM
CARGO DOORS
28-0-2656 REAMER - MLG OUTBOARD DOOR HINGE 52-90-01 802 AMM
28-0-2680G TEST SET - CIRCUIT BREAKER 24-90-00 002 AMM
28-0-2758 CAN - FLAP GEARBOX OIL 12-21-01 305 AMM
28-0-2771H SET - MINI NIPPLE GREASING 12-21-01 302 AMM
28-0-2807C TEST SET - SNIFFLE VALVE 36-92-01 501 AMM
28-0-2867 SPANNER - LIFTDUMPER BEEL CRANK 27-66-01 401 AMM
RETAINER NUT
28-0-3266C KIT - CW TANK BLANKING 28-90-02 401 AMM
28-0-3415 HOSE - DIFFERENTIAL PRESSURE 21-90-00 002 AMM
28-0-3484 STAND - ENGINE BUILD-UP 71-00-00 404 AMM
28-0-3508 FRAME - COMPLETE ENGINE HOISTING 71-00-00 410 AMM
28-0-3510 SLING - HOISTING, APU 49-10-00 402 AMM
28-0-3513 SLING - HOISTING, ENGINE ATTACHMENT 54-90-01 401 AMM
BEAMS
Page 4
FOKKER 100/70
NUMERICAL INDEX
28-0-3515 ADAPTER - REAR, ENGINE HOISTING 71-00-00 402 AMM

28-0-3516 ADAPTER - FRONT, ENGINE HOISTING 71-00-00 403 AMM
28-0-3517 SLING - AIR INTAKE HOISTING, 620-15 71-11-04 401 AMM
ENGINE
28-0-3518 SLING - THRUST REVERSER HOISTING 78-92-00 401 AMM
28-0-3697 SLING - COMPLETE ENGINE HOISTING 71-00-00 401 AMM
28-0-3730 SLING - OUTER WING HOISTING 57-90-00 402 AMM
28-0-3795 PULLER - WHEELSPEED SENSOR 32-11-01 409 AMM
28-0-3833 FIXTURE - ENGINE ALIGNMENT 51-50-01 601 AMM
28-0-3885 FIXTURE - HORIZONTAL STABILIZER 51-91-00 601 AMM
ALIGNMENT, STA 4462,5-4660
28-0-3886 FIXTURE - WING ALIGNMENT, STA12510- 51-50-00 601 AMM
12888
28-0-3938-01 RIG PIN - TO SIMULATE A STICKING SERVO 76-11-00 502 AMM
VALVE
28-0-3938B SET - RIGGING PIN, POWER CONTROLS 76-11-00 502 AMM
28-0-3948 BOARD - AILERON TAB RIGGING 27-10-00 404 AMM
28-0-3958 SET - RIGGING PIN, FLIGHT CONTROLS 27-71-00 501 AMM
LOCK SYSTEM
28-0-3960 SET - RIGGING PIN, NORMAL BRAKE 32-43-00 502 AMM
CONTROL SYSTEM
28-0-3961B SET - RIGGING PIN, AILERON AND TRIM 27-11-06 502 AMM
CONTROL SYSTEM
28-0-3963B SET - RIGGING PIN, RUDDER AND TRIM 27-24-02 402 AMM
CONTROL SYSTEM
28-0-3968 ADAPTER – ATTACHMENT TOOL 22-41-00 101 AMM
28-0-3973C SET - RIGGING PINS 27-51-00 502 AMM
28-0-3980 TOOL SET - FLAP CARRIAGE ADJUSTMENT 27-53-00 502 AMM
28-0-3982B SET - TORQUE ADAPTER, MAIN TRUNNION 71-00-00 412 AMM
BOLT
28-0-3984 TEST BOX - HYDRAULIC INDICATOR 29-30-02 101 AMM
28-0-3995 TEST BOX - POWER INDICATOR 24-90-01 101 AMM
28-0-3997 TEST BOX - TEMP AND PRESS COND BOX 21-63-02 101 AMM
28-0-4027 TEST BOX - FLAP CONTROL DATA UNIT 27-55-02 101 AMM
28-0-4028 TEST BOX - RUDDER LIMITER MONITOR 27-23-01 102 AMM
28-0-4035 HOSE - DRAIN, PRESSURIZED WATER 38-12-00 301 AMM
SYSTEM
28-0-4037B SET - HYDRAULIC SYSTEM ADAPTER 29-37-00 501 AMM
28-0-4038 TESTBOX - INDICATOR, TEMP & PRESS AND 21-00-02 101 AMM
MAINTENANCE & TEST PANEL
28-0-4057 TEST BOX - STALL PROTECTION 27-35-01 101 AMM
COMPUTER
28-0-4058 SET - TORQUE ADAPTER, HORIZONTAL 27-95-02 401 AMM
STABILIZER BEARING
28-0-4060 TEST SET - CREW OXYGEN SYSTEM 35-90-00 501 AMM
28-0-4061 SLING - HOISTING, UPPER COWLING DOOR 54-90-03 401 AMM
28-0-4062 PULLER - CHATTERPROOF BOLT 71-00-00 414 AMM
Page 5
FOKKER 100/70
NUMERICAL INDEX
28-0-4066 CART - RETAINING, UPPER AND LOWER 54-90-04 402 AMM

COWLING DOOR
28-0-4068 SLING - INBOARD FLAP HOISTING 27-50-01 402 AMM
28-0-4069 TEST BOX - FAILURE DETECTION UNIT, 77-31-01 101 AMM
ENGINE
28-0-4070B SET - ADAPTER CABLE, RVDT TESTER 22-11-04 503 AMM
28-0-4074 HOSE - HYDRAULIC SYSTEM DRAIN 29-00-04 401 AMM
28-0-4075 BRIDLE - TOWING 09-10-00 202 AMM
28-0-4076 SET - MAIN WHEEL CHOCK 10-11-00 217 AMM
28-0-4077 BOARD - AILERON RIGGING 27-10-00 402 AMM
28-0-4080 TOOL - BACKLASH CHECKING, FLAP 27-53-05 602 AMM
ACTUATOR BALL NUT
28-0-4085B PLATE - FLAP AND VANE RIGGING 27-50-03 502 AMM
28-0-4088 COVER - AIRCO COOLING AIR INLET 10-11-00 204 AMM
28-0-4089 COVER - APU VENTILATION AIR INLET 10-11-00 205 AMM
28-0-4090 COVER - APU OIL COOLER OUTLET 10-11-00 208 AMM
28-0-4091 COVER - APU EXHAUST 10-11-00 206 AMM
28-0-4092 COVER - AIRCO COOLING AIR OUTLET 10-11-00 209 AMM
28-0-4102 SET - RIGGING PIN, ELEVATOR CONTROL 27-91-05 402 AMM
SYSTEM
28-0-4103 ADAPTER - TORQUE, THRUST REVERSER 78-90-00 401 AMM
TO ENGINE ATTACHMENT BOLTS
28-0-4105 COVER - ENGINE AIR INTAKE 10-11-00 212 AMM
28-0-4106 UNIT - FLUTTER DAMPER FILLING,RUDDER 27-11-10 301 AMM
AND AILERON
28-0-4106A UNIT - FLUTTER DAMPER FILLING,RUDDER 27-11-10 302 AMM
AND AILERON
28-0-4107B TEST SET - SAFETY VALVE 36-12-03 501 AMM
28-0-4113 KIT - RIGGING, NOSE WHEEL STEERING 32-52-00 502 AMM
SYSTEM
28-0-4125 SLING - OUTBOARD FLAP HOISTING 27-50-02 401 AMM
28-0-4130C SET - RIGGING PIN, HORIZONTAL 27-41-01 402 AMM
STABILIZER CONTROL SYSTEM
28-0-4137 SET - COVERING PLATE, STATIC PORTS 10-11-00 210 AMM
28-0-4142 FIXTURE - BRAKE DISC ALIGNMENT 32-11-01 602 AMM
28-0-4157 SET - RIGGING PIN, FLAP SHROUD DOORS 27-50-03 504 AMM
AND VANES
28-0-4160 SLING - HOISTING ENLARGED CARGO 52-33-00 401 AMM
DOOR
28-0-4167 PLUG - STALL WARNING SYSTEM TEST 27-97-01 601 AMM
28-0-4173 SET - SWITCHING BOX ADJUSTMENT, 76-11-04 402 AMM
POWER CONTROLS
28-0-4176 SET - MICROSWITCH ADJUSTMENT, 52-45-02 401 AMM
SERVICE EMERGENCY DOORS
28-0-4195 FIXTURE - MEASURING 08-30-00 202 AMM
28-0-4198 TROLLEY - THRUST REVERSER 78-92-02 402 AMM
28-0-4205 TEST BOX - INTERFACE, FLIGHT WARNING 31-51-00 501 AMM
COMPUTER
Page 6
FOKKER 100/70
NUMERICAL INDEX
28-0-4211 ADAPTER – HOISTING, APU 49-00-00 503 AMM

28-0-4214 TEST BOX – NOISE GENERATOR 23-31-00 502 AMM
28-0-4215A TEST SET - WHEELSPEED SIMULATOR, 27-90-02 501 AMM
LIFTDUMPER SYSTEM
28-0-4219 COVER - ENGINE EXHAUST 10-11-00 213 AMM
28-0-4220 SLING - UPPER DOOR HOISTING, THRUST 78-31-01 401 AMM
REVERSER
28-0-4224 RETAINER - SEAL SPRING, REAR SYUBWING 54-90-01 402 AMM
28-0-4225C SET - GROUNDLOCK, THRUST REVERSER 78-30-00 501 AMM
28-0-4225D SET - GROUNDLOCK, THRUST REVERSER 78-30-00 502 AMM
28-0-4226 TOOL - REMOVAL INSTALLATION, REAR 54-90-02 401 AMM
STUBWING SEAL SPRING
28-0-4230 TEST SET - SELECTION AND SYNCHRO ADJ, 27-50-01 403 AMM
FLAP
28-0-4237 TROLLEY - AIR INTAKE 71-11-04 402 AMM
28-0-4239 TEST BOX - DIMMING CONTROL UNIT 33-13-01 102 AMM
28-0-4240 TOOL BOX - AIRFRAME 20-00-00 005 AMM
28-0-4246 TEST SET - LIFTDUMPER SWITCHES, 27-65-00 501 AMM
LH AND RH
28-0-4247 RETAINER - APRON 54-90-05 402 AMM
28-0-4249 TEST BOX - CONTROL UNIT, AUTOMATIC 32-48-00 501 AMM
BRAKE
28-0-4255 COVER - NOSE WHEEL 10-11-00 214 AMM
28-0-4256 COVER - MAIN WHEEL 10-11-00 215 AMM
28-0-4316 CABLE - RADIO ALTIMETER, COLLINS 34-42-01 501 AMM
28-0-4320-01 RACK - SAFETY, FORWARD SERVICE 52-90-04 201 AMM
EMERGENCY DOOR
28-0-4320-02 RACK - SAFETY, REAR SERVICE 52-90-04 202 AMM
EMERGENCY DOOR
28-0-4378 SET - RIGGING PIN, LANDING GEAR 32-33-00 501 AMM
ALT.EXTENSION CONTROL SYSTEM
28-0-4383 PULLER - CARGO DOOR HINGE PINS 52-90-01 401 AMM
28-0-4416 SLING - HOISTING, SERVICE EMERGENCY 52-41-00 401 AMM
DOOR
28-0-4419 TEST BOX - INTERFACE, FLIGHT WARNING 31-51-00 502 AMM
COMPUTER
28-0-4465 SLING - HOISTING, PASSENGER DOOR 52-90-03 401 AMM
28-0-4479 SLING - AIR INTAKE HOISTING, 650-15 71-11-04 403 AMM
ENGINE
28-0-4494 TEST BOX - ENHANCEMENT UNIT, STALL 27-90-03 501 AMM
PROTECTION
28-0-4499 ADAPTER - FUEL LINE COUPLING TORQUE 28-92-01 401 AMM
STUBWING LH AND RH
28-0-4524 SLING - HOISTING, HORIZONTAL 27-91-04 402 AMM
STABILIZER
28-0-4531 FIXTURE - ELEVATOR HOISTING 27-91-06 402 AMM
Page 7
FOKKER 100/70
NUMERICAL INDEX
28-0-4533 PIN - SPEEDBRAKE HANDLE SAFETY 27-60-01 401 AMM

28-0-4549B SET - DUMMY SENSORS, PROXIMITY 31-90-04 501 AMM
SENSING SYSTEM
28-0-4556 FRAME - HOISTING, HORIZONTAL 27-40-00 404 AMM
STABILIZER
28-0-4571 SET - RIGGING PIN, PAX AND SE DOOR 52-90-06 401 AMM
LOCK MECHANISM
28-0-4591 LOCK - THRUST REVERSER (LOOSE EQM.) 78-00-00 201 AMM
28-0-4637 PIN - SAFETY, MOVING BELT LOADING 25-57-00 301 AMM
SYSTEM
28-0-4643 FIXTURE - SPRING BUNGEE CHECKING, 27-97-02 201 AMM
HOR STAB AND AIL SERVO VALVE
28-0-4652 STAND - APU BUILD UP 49-00-00 001 ABM
28-0-4683 EXTRACTR - HINGE PINS, MAIN LANDING 32-90-03 402 AMM
GEAR TORQUE LINKS
28-0-4712 TOOL BOX - AIRFRAME SNAP-ON 20-00-00 010 AMM
28-0-4713 TOOL BOX - ELECTRICIAN, SNAP-ON 20-00-00 014 AMM

28-0-4733 SET - TARGET AND ANTI-TARGET, 31-41-00 501 AMM
PROXIMITY SENSING SYSTEM
28-0-4750 FIXTURE - SPEEDBRAKE CHECK 27-91-07 402 AMM
28-0-4760 TOOL - ADJUSTMENT, GROUND FLIGHT 32-63-01 501 AMM
SWITCH
28-0-4771 SET - MOUNTING, WASH WATER TUBING 38-00-00 401 AMM
28-0-4806 SET - RIGGING PIN, ENLARGED CARGO 52-33-02 501 AMM
DOOR
28-0-4824 ADAPTER - TORQUE, LOCK NUT ELEVATOR 55-20-00 401 AMM
SUPPORT
28-0-4832B TEST SET - PNEUMATIC VALVE 21-21-01 502 AMM
28-0-4834 HOSE - FILL AND BLEED, SHIMMY DAMPER 32-90-05 202 AMM
TORQUE LINK
28-0-4835 SET - ADAPTER, RUDDER SUPPORT 55-20-00 501 AMM
BEARING
28-0-4848 GAUGE - SETTING, LIFTDUMPER 27-60-02 501 AMM
MECHANICAL DRIVE SYSTEM
28-0-4891 ADAPTER - TORQUE, IDG OIL LINE 24-11-01 402 AMM
28-0-4893 ADAPTER - TORQUE-SERVO MOUNT SLIP 22-11-05 501 AMM
CLUTCH
28-0-4902 JIG - SEAL INSTALLATION, AVIONICS BAY 52-43-01 401 AMM
HATCH
28-0-4907 CONTRLLR - SHUT OFF- AND SERVO VALVE, 32-48-00 301 AMM
AUTOMATIC BRAKE SYSTEM
28-0-4922 ADAPTER - MAIN LANDING GEAR JACK 07-11-00 206 AMM
28-0-5008 STRAP - INSTALLATION, PERI SEAL 36-12-03 402 AMM
HOUSING
28-0-5011 SET - ADAPTER, LIFT DUMPER MECHANICAL 27-66-02 501 AMM
SYSTEM
28-0-5018 SPANNER - ECCENTRIC BUSH, FLAP 27-50-01 503 AMM
DEFLECTION TROLLEY
Page 8
FOKKER 100/70
NUMERICAL INDEX
28-0-5195 TEST SET - ACCUMULATOR 29-13-00 501 AMM

28-0-5217 SLEEVE - PROTECTION, MLG WHEEL AXLE 32-11-01 412 AMM
28-0-5255 ADAPTER - LOCKNUT TORQUE, 32-45-02 403 AMM
WHEELSPEED SENSOR
28-0-5260 DOLLY - LANDING GEAR 32-11-01 413 AMM
28-0-5289 PIN - REAR CARGO DOOR 52-33-00 402 AMM
28-0-5295 SLING - HOISTING, HORIZONTAL 27-42-01 404 AMM
STABILIZER
28-0-5296 FRAME - INSTALL/REMOVAL, REAR CARGO 52-33-00 403 AMM
DOOR
28-0-5303 TEST BOX - ATMOSPHERE ALTITUDE 36-11-00 503 AMM
SWITCHES
28-0-5328 DUMMY - SENSOR, MENASCO M.L.G. DOWN 32-61-01 502 AMM
LOCK
28-0-6004 PLATE - CALIBRATION 05-00-00 1/2 NDT
28-0-6090 LIFTING EQUIPMENT – INTEGRATED DRIVE 24-11-01 405 AMM
GENERATOR
305-159 SET - SPANNER, FUEL SYSTEM OVERFLOW 28-21-04 401 U1918 AMM
VALVE
38-808-01 BOX – BREAKOUT, PROXIMITY SENSING 31-41-00 502 08748 AMM
SYSTEM
460001682-75 TUBE SPANNER - RETAINING PLUG, NOSE 32-21-01 502 AMM
GEAR LEG
460002249 SPANNER - GLAND NUT, NOSE GEAR 32-21-06 401 AMM
460002262 SPANNER - MAIN GEAR GLAND NUT 32-11-08 402 AMM
460002264 TOOL - DRIFT 32-11-04 403 K0654 AMM
460002270 PULLER - PIN, MAIN GEAR STOP RINGS AND 32-11-08 403 AMM
GLAND NUT
460002288 SPANNER - STOP SLEEVE, NOSE GEAR 32-21-06 404 AMM
460002293 SLEEVE - SLIDING MEMBER ASSEMBLY, 32-11-08 404 AMM
MAIN GEAR
NOSE GEAR
460002348 PAD - PRESSURE, NOSE GEAR SLIDING 32-21-01 403 AMM
MEMBER BUSHES
460002445 PULLER - BEARING, NOSE GEAR 32-21-06 402 AMM
460002469 PIN - ADJUSTMENT, MAIN GEAR TOGGLE 32-11-01 403 AMM
LINK
460002518 TOOL - DOWEL ASSEMBLY, NOSE GEAR 32-21-06 403 AMM
460002669 SLEEVE - ASSEMBLY, NOSE GEAR GLAND 32-21-06 406 AMM
NUT AND SEALS
460002674 FILL UNIT- SEALANT,MAIN LANDING GEAR 32-11-04 401 AMM
460002675 EXTRACTOR - PIN, TORQUE LINK HINGE PIN 32-11-04 402 AMM
460002678 TOOL - ASSEMBLY, MAIN GEAR SLIDING 32-11-08 405 AMM
MEMBER SEALS
460004330-86 TOOL - PRESS 32-11-04 404 K0654 AMM
NOSE GEAR
Page 9
FOKKER 100/70
NUMERICAL INDEX
460004964 TOOL - BACKING, RING ASSEMBLY 32-11-08 406 AMM

460006181 TOOL - GAPPING, ANTI EXTRUSION RING 32-11-08 407 AMM
460006183 TOOL - GUIDE STOP RING ASSEMBLY 32-11-08 408 AMM
460006196 SLEEVE - ASSEMBLY, MAIN GEAR SLIDING 32-11-08 409 AMM
MEMBER SEALS
460006201 ADAPTER - TURNING TUBE CAP NUT 32-21-08 403 K0654 AMM
460006203 ADAPTER - TURNING TUBE CAP NUT 32-21-08 404 K0654 AMM
581-901 PULLER - LAMP CAPSULE, PUSH BUTTON 20-92-01 201 H6389 AMM
SWITCH
5E88-511 GAUGE - CHECKING, BRAKE DISC DRIVE 32-42-01 601 0B9R9 AMM
CHANNELS
60-16 KIT - AIRCRAFT COMPONENTS WINCH 07-12-00 202 K1425 AMM
704-2221-001 CABLE - ADAPTER 34-61-00 203 97896 AMM
810-325 SPANNER - INSTALLATION, LOCATOR 31-90-01 202 94970 AMM
BEACON BATTERY END COVER
810-546 CLAMP - VICE, LOCATOR BEACON BATTERY 31-90-01 201 94970 AMM
822-0030-001 ADAPTER - SLIP CLUTCH TEST, AFCAS 22-11-03 501 4V792 AMM
SERVO MOUNT
833780-1 TEST SET - GTCP 36-150R 49-00-00 501 99193 AMM
8483 DOCK - TAIL 12-93-00 302 H3188 AMM
88-01T SPANNER - CEILING PANEL RECEPTACLE 25-24-00 401 H0910 AMM
88149-02C DOCK - TAIL 12-93-00 302 AMM
9599-607-15902 SIMULATOR - FLIGHT LINE 34-00-01 505 D2029 AMM
964-0400-006 LOADER - DATA, DISCDRIVE TYPE 34-61-00 202 97896 AMM
964-0446-001 TEST SET – FLIGHT DATA RECORDER 31-31-00 501 97896 AMM
981-6301-002 TEST SET - FLIGHT DATA RECORDER 22-11-03 401 97896 AMM
995022 PLIERS - SAFETY PIN INSERTION 35-21-00 401 16827 AMM
A102/17 HANDLE – VALVE DE-ACTIVATION 28-00-00 501 U1918 AMM
A88309JR CART - STRUT SERVICING, LANDING GEAR 32-11-08 401 H4464 AMM
ADAF100-612 KIT - TEST ADAPTER, PITOT STATIC 34-00-01 503 38002 AMM
SYSTEM
ADTS300 TEST SET - PITOT STATIC SYSTEM 34-00-01 502 U0427 AMM
AL25-3X6 LADDER - INSPECTION 12-00-00 301 H7807 AMM
AN60-5-00006-1 SET - AIRCRAFT WEIGHING 08-30-00 204 06433 AMM
AN8501 ANITA CONSOLE - COMPOSITE REPAIR 51-90-01 801 F7856 AMM
AS57 TOWBAR - STANDARD 09-10-00 201 D2029 AMM
AS57-001 TOWBAR - (ALTERNATIVE) 09-10-00 201 D2029 AMM
AS58038 COUPLING - LP GROUND CONNECTION 21-31-00 501 F7161 AMM
AT24437 ADAPTER - GLAND NUT SEAL 32-11-08 410 02121 AMM
AT24742 SHAFT – SPLINED ASSEMBLY TOOL 27-42-01 501 02121 AMM
AT24882 TOOL - INSTALLATION,SCRAPER AND SEAL 32-11-08 411 02121 AMM
AT31687 TORQUE TOOL - ELECTRIC MOTOR 27-44-01 501 02121 AMM
ATC600A TESTSET - DME AND ATC SYSTEM 34-54-00 501 22525 AMM
Page 10
FOKKER 100/70
NUMERICAL INDEX
ATC601 TESTSET – TRANSPONDER RAMP 34-54-00 502 22525 AMM

AW10 SET - WHEEL CHOCK 10-11-00 216 72384 AMM
B221075T-1 TESTER - LATCH 52-51-04 501 56135 AMM
B221513T-501 TOOL – BOLT ROTATION 52-51-04 502 56135 AMM
C7304 PROBE – DIFFERENTIAL EDDY CURRENT 72-31-12 601 K0680 AMM
(2MHz)
CP27913 COVER - MVP - ENGINE 71-92-01 401 K0680 AMM
CP30558-1 SLING - ENGINE DELETED
CP30596-4 STAND - ENGINE TRANSIT 71-93-03 401 K0680 AMM
CP30597 GUARD - FRONT, ENGINE TRANS- 71-93-04 401 K0680 AMM
PORTATION TROLLEY
CP30598-3 GUARD - REAR, ENGINE TRANS- 71-93-05 401 K0680 AMM
PORTATION TROLLEY
CP30599-1 SUPPORT - REAR, ENGINE TRANS- 71-93-06 401 K0680 AMM
PORTATION TROLLEY
CP30604 SLING - TOP FRAME HOISTING, ENGINE 71-93-07 401 K0680 AMM
TRANSPORTATION TROLLEY
CP30608 TOWBAR - ENGINE TRANSPORTATION 71-93-08 401 K0680 AMM
TROLLEY
CP30609 SLING - TROLLEY WITH ENGINE DELETED
CP30616-2 STAND - ENGINE DRESSING 71-94-01 401 K0680 AMM
CP30626 SET - ADAPTER, QECU TRANSPORTATION 71-95-01 401 K0680 AMM
TROLLEY
CP30627 GUARD - FRONT, QECU TRANSPORTATION 71-95-02 401 K0680 AMM
TROLLEY
CP30628 GUARD - REAR, QECU TRANSPORTATION 71-95-03 401 K0680 AMM
TROLLEY
CP30647-1 ADAPTER - SLING, ENGINE DELETED
D00940B TOOL – MEASURING, AIR CYCLE MACHINE 21-51-03 601 H0643 AMM
DB-45-B3 COMPARATOR – GREEN COLORED 33-52-02 601 60640 AMM
DB-45-B4 COMPARATOR – YELLOW COLORED 33-52-02 602 60640 AMM
DIN1810A45-50 SPANNER - ECCENTRIC BUSH 27-50-01 501 H2703 AMM
DMC 839 SET - SERVICE TOOLS, ELECTRICAL 20-90-00 2 11851 AMM
CONNECTORS
DT06-23 JACK - MECHANICAL FRONT FUSELAGE 07-11-00 201 D2029 AMM
DT25-26 JACK - MECHANICAL WING 07-11-00 202 D2029 AMM
DT25-26E JACK - ELECTRICAL WING 07-11-00 202 D2029 AMM
DT25-26K JACK - PNEUMATIC WING 07-11-00 202 D2029 AMM
ES365 TEST BOX - NOISE GENERATOR 23-31-00 501 3AC69 AMM
FON8-0513C FLAG - CAUTION 20-00-00 001 AMM
F28-FTM-R020-023 TOOL – BLANKING, VENT/OVERFLOW LINES 28-20-00 501
F28-FTM-R020-025 TOOL – BLANKING, FILL/TRANSFER LINES 28-20-00 503
F28-FTM-R020-027 TOOL – BLANKING, FILL/TRANSFER LINE 28-20-00 505
OUTSIDE FUSELAGE
F28-FTM-R020-029 TOOL – BLANKING, VENT/OVERFLOW LINE 28-20-00 507
OUTSIDE FUSELAGE
GU21447-2 TOOL - RESET, LP SHAFT GOVERNOR 71-00-00 508 K0680 AMM
GU28144 TOOL - LEVER, HP AIR BLEED VALVE 75-32-30 501 K0680 AMM
GU28438 TOOL - SPECIAL, AIRFLOW CONTROL 71-00-00 601 K0680 AMM
REGULATOR
GU28767 TOOL - BLADE EXTENTION, LP FAN BLADE 72-90-01 401 K0680 AMM
Page 11
FOKKER 100/70
NUMERICAL INDEX
GU28875-1 SPANNER - KEY, ENGINE GROUND AND 71-00-00 501 K0680 AMM
APPROACH IDLE
GU28876-1 SPANNER - KEY, ENGINE GROUND AND 71-00-00 502 K0680 AMM
APPROACH IDLE
GU28883-1 TOOL - INSTALLATION, SPLIT TAPERED 71-00-00 415 K0680 AMM
BUSH
GU28993 PANEL - INSPECTION 71-00-00 416 K0680 AMM
GU29492 GAUGE - SETTING, BLEED VALVE SENSING 71-90-05 401 K0680 AMM
SWITCH
GU29493 GAUGE - SETTING, BLEED VALVE 71-90-05 402 K0680 AMM
SENSING SWITCH
GU29773 EXTRACTOR - IMPACT, INTROSCOPE PLUG 71-00-00 417 K0680 AMM
GU30073 PIPE EXTRACTOR - FUEL BURNER FEED 71-00-00 418 K0680 AMM
PIPES
GU30411 EXTRACTOR - IDG DRIVESHAFT 72-90-01 402 K0680 AMM
GU30622 SPANNER - DCU ADJUSTMENT 71-00-00 509 K0680 AMM
GU32879 GAUGE - SETTING, BLEED VALVE SENSING- 71-90-05 404 K0680 AMM
SWITCH
GU32880 GAUGE - SEETING, BLEED VALVE SENSING- 71-90-05 403 K0680 AMM
SWITCH
GZ39246 SET - BLANKING, FUEL SYSTEM EJECTOR 72-90-01 403 K0680 AMM
PUMP
H0040A GAUGE - DIGITAL PRESSURE 21-90-00 001 AMM
H0041 CAP - WING TANK TEST 28-15-00 501 AMM
HCU4668 HANDLE - GAUGE, BLEED VALVE SENSING 75-32-30 503 K0680 AMM
HSK6263-11 TESTER - LATCH 52-51-04 503 4U783 AMM
HSK6263-13/-15 TOOL – BOLT ROTATION 52-51-04 504 4U783 AMM
HTPC-P90E1SZ CART - MOBILE HYD SYSTEM TEST 29-36-00 502 H6394 AMM
HTT165-760E2 CART - MOBILE HYD SYSTEM TEST 29-36-00 501 H2936 AMM
HU2648 PULLER - OIL PUMP ASSY 72-01-02 401 K0680 AMM
HU2942 EXTRACTOR - RELIEF VALVE HOUSING 72-01-01 401 K0680 AMM
HU30334 RETAINER - LP FAN BLADE 71-00-00 419 K0680 AMM
HU31282/1 SET – RIGGING PIN 71-00-00 510 K0680 AMM
HU3233-1 PULLER - FUEL FLOW TRANSMITTER 73-11-03 401 K0680 AMM
HU3855 SOCKET - HP AIR BLEED VALVE 75-32-30 502 K0680 AMM
HU8506-1 PULLER - ELBOW DOWEL 73-11-05 401 K0680 AMM
I500C SET - C SPANNER 28-13-01 401 F0553 AMM
JCAIR429 TESTER - ARINC 429 DATA-BUS 20-90-00 001 41364 AMM
KU37366 SOCKET - WRENCH Replaced by
1013714
M7950-93S3 COUPLING - HP GROUND CONNECTION 36-91-01 301 0SWM AMM
9
MP429F PRINTER - MAINT CONTROL COMPUTER 22-90-00 301 3T661 AMM
MS01 SUPPORT - REAR FUSELAGE 07-11-00 203 D2029 AMM
N30A5A LOCATOR/RECEIVER - LOCATION BEACON 31-90-02 501 94970 AMM
NAV402AP TEST SET - NAVIGATION SYSTEM 34-00-01 501 22525 AMM
P1908 SOCKET - MAIN WHEEL AXLE NUT TORQUE 32-11-01 411 1CV05 AMM
PL1 TEST BOX - LOCATOR BEACON 31-31-05 401 94970 AMM
Page 12
FOKKER 100/70
NUMERICAL INDEX
PSD30-2G TEST BOX - FUEL QUANTITY PROBES 28-41-00 501 41364 AMM
PV100 SUPPLY UNIT - PRESSURE/VACUUM 34-00-01 504 U0427 AMM
QC6847 TEST PIECE – WITH 0,75 MM CALIBRATION 72-31-12 602 K0680 AMM
SLOT
RC25-08 JACK - MAIN AND NOSE GEAR 07-11-00 209 D2029 AMM
RL30-14 JACK - CANTILEVER, MAIN AND NOSE 07-11-00 204 D2029 AMM
LANDING GEAR
RY31020A ADAPTER - INLET, POWER PLANT 71-96-03 401 K0680 AMM
RX44487 CAP – BLANKING, GROUND RUNNING 72-30-00 701 K0680 AMM
S0128A SET - MAGNETIC PARTICLE INSPECTION 05-00-00 1 NDT
S0158 PROBE - EC CALIBRATION 05-00-00 1 NDT
S0168 PLATE - EC CALIBRATION 05-00-00 1 NDT
S0170 PLATE - EC CALIBRATION 05-00-00 1 NDT
S0171 PROBE - EC CALIBRATION 05-00-00 1 NDT
S0172 PROBE - EC CALIBRATION, RSM35/5.1 05-00-00 1 NDT
S0173 PROBE - EC CALIBRATION, RSM35/5.6 05-00-00 1 NDT
S0174 CABLE - INTERCONNECTING, WITH MINI 05-00-00 1 NDT
ROTOR
S0175 BLOCK - CALIBRATION 05-00-00 1 NDT
SSLM6-12-15 JACK - NOSE GEAR 07-11-00 209 U2041 AMM
SSTF100L TOWBAR - (ALTERNATIVE) 09-10-00 201 #F152 AMM
SSTF100S TOWBAR - (ALTERNATIVE) 09-10-00 201 #F152 AMM
ST2075-44 C-SPANNER - NOSE GEAR LEG 32-21-06 405 K0654 AMM
ST2170 PULLER - PRESSURE, NOSE GEAR SLIDING 32-21-01 404 K0654 AMM
MEMBER BUSHES
T470 TESTER - PHASE ROTATION 24-90-00 001 63774 AMM
T49 TEST SET - TCAS AND ATC TRANSPONDER 34-46-00 501 92606 AMM
TCAS201 TEST SET - TCAS 34-46-00 502 22525 AMM
TMHCP18-00-00 JACK - MAIN AND NOSE GEAR 07-11-00 209 F8303 AMM
UT739 SPANNER - ADJUSTING, AIRFLOW 71-00-00 506 K0680 AMM

CONTROL REGULATOR AND ACTUATOR
UZ7S5 GUN - HYD SYSTEM REPLENISHING 12-12-02 301 K6057 AMM
UZ893-5 GUN - HYD SYSTEM REPLENISHING 12-12-02 302 K6057 AMM
W01 ADAPTER - GREASING 12-21-01 306 #W077 AMM
W05005 SET – MANIFOLD TEST ASSY, DIFFERENTIAL 29-37-00 801 H0643 AMM
PRESSURE SWITCHES
W28754-11-2596 TOOL – PRE-TENSION, MOVING BELT 25-57-00 801 H0643 AMM
LOADING SYSTEM
W69691-401 DE-ACTIVATION TOOL – CROSS FEED 28-00-00 205 AMM
VALVE
W98714A KIT – TUBE REPAIR 20-11-00 802 AMM
W98714B KIT – TUBE REPAIR 20-11-00 804 AMM
W98841-001 TOOL – AUX TANKS INSTALLATION RAILS 28-20-00 509 AMM
Page 13
FOKKER 70/100
CHAPTER PAGE c DATE R CHAPTER PAGE C DATE R

SECTION 0 E SECTION 0 E
E E
LEP 1/2 NOV 01/09 R
LIST OF VENDORS 1 SEP 01/04

LIST OF VENDORS 2 AUG 01/03
LIST OF VENDORS 8 NOV 01/09 R
LIST OF VENDORS 9 NOV 01/09 R
Page 1/2
LEP LIST OF VENDORS NOV 01/09
FOKKER70/100
PART A: LIST OF VENDOR CODES
#8254 Baumann Und Co R.

Hauptstrasse 4
77830 BUEHLERTAL
GERMANY
#E114 Electronic Aviation Systems Inc.

P.O.Box 9213
WICHITA KS 67277
U.S.A.
#F152 Manfred Fladung G.M.B.H.

Heimbach 26
63776 MOEMBRIS
GERMANY
#1085 I.T.T. Canon Electric

See Vendor Code 71468
#T263 Testo G.M.B.H. & Co
See Vendor Code D2238
#W077 Woerner Nederland B.V.
See Vendor Code H7984
02121 Goodrich Aerospace Canada LTD
1400 South Service Road West
OAKVILLE ON L6L 5Y7
CANADA
03705 Apex Machine And Tools Co.

762 Stewart Street
P.O.Box 952
DAYTON OH 45401
U.S.A.
06090 Raychem Co.

300 Constitution Drive
MENLO PARK CA 94025
U.S.A.
06141 L3 Communications
P.O.Box 3041
SARASOTA FL 34230
U.S.A.
Page 1
LIST OF VENDORS SEP 01/04
FOKKER70/100
06383 Panduit Co.

17301 Ridgeland Avenue
TINLEY PARK IL 60477
U.S.A.
06433 General Aerodynamics Corp.

P.O.Box 15008
Arlington TX 76017
U.S.A.
08748 Eldec Co.
P.O.Box 100
LYNWOOD WA 98036
U.S.A.
OB9R9 Aircraft Braking Systems

1204 Massillon Road
AKRON OH 44306
U.S.A.
OSWM9 Kaiser Marquardt
16555 Saticoy Street
VAN NUYS CA 91046
U.S.A.
11851 Daniels MFG Corp.
526 Thorpe Road
ORLANDO FL 32824
U.S.A.
16717 Aeroquip Corporation
300 South East Avenue
JACKSON MI 49203
U.S.A.
1CV05 Stanley-proto Industrial Tools
14117 Industrial Park Boulevard Ne
COVINGTON GA 30209
U.S.A.
22525 Instruments and Flight Research Inc,
2716 George Washington Blvd.
WICHITA KS 67210
U.S.A.
Page 2
LIST OF VENDORS AUG 01/03
FOKKER70/100
26433 Parker Hannifin Corp.

Airborne Division
P.O.Box 4032
ELYRIA OH 44036
U.S.A.
2F567 Winchester John H. Inc.

See Vendor Code 56835
30120 Ideal Aerosmith Inc.

P.O.Box 637
EAST GRANDFORKS MN 56721
U.S.A.
38002 Nav-aid Ltd.

2955 Diab Street
St.LAURENT PQ H4S 1M1
CANADA
3AC69 Aerosystems International Inc.

3538 Ashby
SAINT LAURENT, QUEBEC H4R 2C1
CANADA
3T661 Intermetrics Inc.

1750 112th Avenue Northeast Suite D151
BELLEVUE WA 98004
U.S.A.
41364 JcAIR International

400 Industrial Parkway
INDUSTRIAL AIRPORT KS 66031
U.S.A.
45402 Pacific Scientific Company

1800 Higland Avenue
DUARTE CA 91010
U.S.A.
4U783 Hartwell Corp HASCO Div

1020 S Richfield Road
PLACENTIA CA 92870
U.S.A.
Page 3
FOKKER70/100
4V792 Rockwell Collins

400 Collins Road Northeast
CEDAR RAPIDS IA 52498
U.S.A.
55719 Snap-on Tools Corp.

2801 80th Street
KENOSHA WI 53140
U.S.A.
56135 C & D Interiors

Division of C & D Aerospace
5701 Bolsa Avenue
HUNTINGTON BEACH CA 92649
U.S.A.
56835 Winchester John H. Inc.

25981 Highland Road
CLEVELAND OH 44143
U.S.A.
59603 Tronair Aircraft Ground Support Equipment

South 1740 Eber Road
HOLLAND OH 43528
U.S.A.
60640 Self-Powered Lighting Corp
31 Waterloo Avenue
BERWYN PA 19312
U.S.A.
63774 Tegam Maddison

7230 North Ridge Road
MADISON OH 44057
U.S.A.
6S097 North Atlantic Intl. Corp,

Quantex Division
60 Plant Avenue
HAUPPAUGE NY 11788
U.S.A.
70347 American Aviation Intl Corp,

180 Varick Street
NEW YORK NY 10014
U.S.A.
Page 4
FOKKER 70/100
71468 I.T.T. Canon Electric

666 East Dyer Road
SANTA ANA CA 92702
U.S.A.
72384 Diamond Rubber Products Co. Inc,
4000 50TH Street Southwest
BIRMINGHAM AL 35228
U.S.A.
86768 Teledyne Republic M F G

Hdqs. Of Teledyne Inc.
15655 Brookpark Road
CLEVELAND OH 44142
U.S.A.
89305 Simmonds Precision Products Inc-Hintco

Hercules International Trade Corp.
100 Panton road
VERGENNES VT 05491
U.S.A.
92606 Tel-instrument Electronics Corp.

728 Garden Street
CARLSTADT NJ 07072
U.S.A.
94970 Dukane Corporation

2900 Dukane Drive
SAINT CHARLES IL 60174
U.S.A.
97896 Honeywell International Inc.

Commercial Avionics Systems
15001 North East 36th Street
REDMOND WA 98073
U.S.A.
99193 A l l i e d Signal Aerospace Co.

Garrett Airline Services Division
P.O.Box 52181
PHOENIX AZ 85072
U.S.A.
Page 5
FOKKER 70/100
D0680 Camlok G.M.B.H.

P.O.Box 1180
65761 KELKHEIM
GERMANY
D1371 Cannon Electric G.M.B.H.

P.O.Box 1120
71365 WEINSTADT
GERMANY
D2029 Hydro Geraete Bau G.M.B.H. und Co. Kg,

P.O.Box 1247
77779 BIBERACH BADEN
GERMANY
D2238 Testo G.M.B.H. & Co
Kolumbin-Kayser-Strasse 17
79853 LENZKIRCH
GERMANY
D3059 Belzer Dowidat G.M.B.H.

Werkzeug-Union
Belzer-Werkzeuge
P.O.Box 120123
5600 WUPPERTAL
GERMANY
D3524 Peddinghaus Carl Dan K.G.
Mittelstrasse 46-48
5822 ENNEPETAL
GERMANY
D8404 Stahlwille
P.O.Box 120103
42331 WUPPERTAL
GERMANY
D8791 Dreusicke Wilhelm Und Co K.G.

Rohdestrasse 17
12099 BERLIN
GERMANY
D9764 Abus
Altenhofer Weg 25
58300 WETTER
GERMANY
Page 6
FOKKER 70/100
F0553 Intertechnique S.A.

P.O.Box 303
91958 COURTABOEUF CEDEX
FRANCE
F2774 Norelem Pmp Nouvelle (S.T.E.)
P.O.Box 72
91942 LES ULIS CEDEX
FRANCE
F6170 Thomson TRT Defence S.A.
P.O.Box 82
92704 COLOMBES CEDEX
FRANCE
F7161 A.E.T. Airport Equipment Technology
Div. Tracma
P.O.Box 2
37270 MONTLOUIS-SUR-LOIRE CEDEX
FRANCE
F7856 G.M.I. Generale De Micro-Informatique
9 Rue Buffault
75009 PARIS
FRANCE
F8308 Techman Head
P.O.Box 208
83089 TOULON CEDEX
FRANCE
H0643 Fokker Aircraft B.V.
See Vendor Code HOW98
H0910 Viba N.V.
P.O.Box 441
2700 AK ZOETERMEER
THE NETHERLANDS
HOG73 Woerner Nederland B.V.
P.O.Box 222
3770 AE BARNEVELD
THE NETHERLANDS
Page 7
FOKKER 70/100
HOW98 Fokker Services B.V.

P.O.Box 231
2150 AE NIEUW-VENNEP
THE NETHERLANDS
H1261 Emerge B.V.

Industrie- en Handelsonderneming
P.O.Box 4
1120 AA LANDSMEER
THE NETHERLANDS
H1506 Buhl Fijnmetaalbewerking B.V.

Oosterenweg 38
1221 JV HILVERSUM
THE NETHERLANDS
H2703 Fijnwerk B.V.

P.O.Box 97
3100 AB SCHIEDAM
THE NETHERLANDS
H2936 Hydraudyne Systems en Engineering B.V,

See Vendor Code H7984
H3188 Saco B.V.

P.O.Box 4304
5944 ZG ARCEN
THE NETHERLANDS
H3527 Argus B.V.
P.O.Box 110
7400 AC DEVENTER
THE NETHERLANDS
H3858 Gizom B.V.

Ommerlanderwijk 139
9644 TC VEENDAM
THE NETHERLANDS
H4464 Tools B.V.
Machine en Gereedschappenhandel
P.O.Box 8040
1005 AA AMSTERDAM
THE NETHERLANDS
Page 8
LIST OF VENDORS NOV 01/09
FOKKER 70/100
H4603 Harrems B.V.

P.O.Box 9600
3506 GP UTRECHT
THE NETHERLANDS
H5648 Romex B.V.
P.O.Box 129
3910 AC RHENEN
THE NETHERLANDS
H6284 Spreeuwenberg Verkoop C.V.

Werfplein 5
3238 BH ZWARTEWAAL
THE NETHERLANDS
H6389 Masters Specialties Company

European Office
P.O.Box 1185
1500 AD ZAANDAM
THE NETHERLANDS
H6394 Hycom B.V.

P.O.Box 1079
7301 BH APELDOORN
THE NETHERLANDS
H7009 Ovako Steel Benelux B.V.

P.O.Box 81
3900 AB VEENENDAAL
THE NETHERLANDS
H7807 Wienese Ladders B.V.

Reactorweg 1-7
3542 AD UTRECHT
THE NETHERLANDS
H7984 Hydraudyne Systems en Engineering B . V ,

P.O.Box 32
5280 AA Boxtel
The Netherlands
K0301 Britool Ltd.

Churchbridge Works
Walsall Road
CANNOCK WS11 3JR
UNITED KINGDOM
Page 9
LIST OF VENDORS NOV 01/09
FOKKER 70/100
K0574 Dowty Electric Ltd.

Fassetts Road Loudwater
HIGH WYCOMBE BUCKS HP10 9UT
UNITED KINGDOM
K0654 Dowty Aerospace Landing Gear
Cheltenham Road
GLOUCESTER GL2 9QH
UNITED KINGDOM
K0680 Rolls Royce
P.O.Box 31
DERBY DE24 8BJ
UNITED KINGDOM
K1425 Didsbury Engineering Co Ltd.
Clifton Works
Manor Road
MANCHESTER M19 3EJ
UNITED KINGDOM
K5294 Smiths Industries
Evesham Road, Bishops Cleeve
CHELTENHAM, GLOS GL52 4SF
UNITED KINGDOM
K6057 Risbridger W. & J. Ltd.
Stychens Lane, Bletchinley
REDHILL, SURREY RH1 4LN
UNITED KINGDOM
K8482 Marples Ltd.
Parkway Works
kettle Bridge Road
SHEFFIELD S9 3BL
UNITED KINGDOM
S3909 Oetiker A.G. Hans
Oberdorfstrasse 21
8810 HORGEN
SWITZERLAND
U0427 Druck Ltd.
Fir Tree Lane
GROBY LEICS LE6 OFH
UNITED KINGDOM
Page 10
FOKKER 70/100
U1595 Avdel Ltd.

Mundel Is
WELWYN GARDEN CITY HERTS AL7 1EZ
UNITED KINGDOM
U1918 Flight Refuelling Ltd.

Abbey Park
TITCHFIELD FAREHAM HAMP P014 4QA
UNITED KINGDOM
U2041 Zwicky Engineering Ltd.

Molly Millars Lane
WOKINGHAM BERKS RG11 2RY
UNITED KINGDOM
LIST OF VENDORS
FOKKER 70/100
PART B: LIST OF LICENCED TOOLMAKERS
F8303 Techman Head

P.O.Box 208
83089 TOULON CEDEX
FRANCE
LIST OF VENDORS
FOKKER 70/100
PART B: LIST OF LICENCED TOOLMAKERS
F8303 Techman Head

P.O.Box 208
83089 TOULON CEDEX
FRANCE
Page 12
FOKKER 70/100
Deutsche Aerospace
LIST OF EFFECTIVE PAGES - TOOL SERVICE BULLETINS


E E
LEP SERVICE 1/2 MAR 01/95 R
BULLETINS INDEX 1/2 MAR 01/95 R
TESBF100-31-01 1 NOV 15/92
2 NOV 15/92
3 NOV 15/92
4 NOV 15/92
5 NOV 15/92
6 NOV 15/92
TESBF 100-33-01 1 JAN 14/93
2 JAN 14/93
3 JAN 14/93
4 JAN 14/93
5 JAN 14/93
6 JAN 14/93
7 JAN 14/93
8 JAN 14/93
9 JAN 14/93
10 JAN 14/93
TESBF100-78-01 1 NOV 06/93
2 NOV 06/93
3 NOV 06/93
4 NOV 06/93
TESBF100-30-01 1 SEP 01/94 N
2 SEP 01/94 N
3 SEP 01/94 N
4 SEP 01/94 N
5 SEP 01/94 N
6 SEP 01/94 N
7 SEP 01/94 N
8 SEP 01/94 N
9 SEP 01/94 N
LEP TOOL SERVICE BULLETINS

PAGE 1/2
MAR 01/95
FOKKER 70/100
Amemberof
Deutsche Aerospace
TOOL AND EQUIPMENT SERVICE BULLETIN

SERVICE BULLETIN INDEX
T.E.S.B. TITLE REVISION REMARKS

STATUS
TESBF100-30-01 TESTBOX - TEMPERATURE CONTROL UNIT,

WINDSHIELD.
TESBF100-31-01 INDICATING/RECORDING SYSTEMS -
SET - DUMMY SENSOR, PROXIMITY
SENSING SYSTEM
TESBF100-33-01 LIGHTS -
DIMMING UNIT TESTBOX
TESBF100-78-01 EXHAUST F100 - THRUST REVERSER
Pa9e 1/2
SERVICE BULLETIN INDEX MAR 01/95
Fokker 100
x_x TOOL AND EQUIPMENT SERVICE BULLETIN
ICE AND RAIN PROTECTION
Testbox - Temperature Control Unit, Windshield
1. Planning Information
A. Effectivity
(1) Windshield Temperature Control unit testbox p/n 27.1-4496.
B. Reason
(1) Some of the WTC units, which have been rejected from the aircraft with
a failure, passes the shop test and are returned to service with a "no
failure found11 indication.
With the present Windshield Temperature Control unit testbox
p/n 27.1-4496 it is not possible to fully simulate an aircraft
situation when testing the WTC units.
To prevent that a faulty WTC unit will be returned to service with a
"no failure found" indication, the testbox has to be modified to
simulate an aircraft situation.
C. Description
(1) This Tool and Equipment Service Bulletin tells you how to:
- Make a modification to the textplate
- Make a modifictaion to the wiring
- Make a modification to the adaptor cable
- Install a new innercover.
(2) The incorporation of this Tool and Equipment Service Bulletin changes
the modification status of the testbox to mod. B.
D. Manpower
(1) Estimated 4 hour
Elapsed time 4 hour (1 man)
E. Material - Costs and Availability

(1) You can order the necessary parts as a mod kit.
The price of mod kit TESBF100-30-01 is NLG 1200,-.
The mod kit will be available within 6 months after we receive your
order.
This offer is valid until Mrt 01/95.
Page 1 2 3 4 5 6 7 8 9
Revision - - - - - - - - -
Sep 01/94 TESBF100-30-01

Page 1
Fokker 100
^-^
F. Tooling - Price and Availability

(1) Not applicable
G. References
(1) Fokker 100 Ground Equipment Manual/ GEM 0060.
H. Other Publications Affected

(1) Fokker 100 Illustrated Tool and Equipment Manual, chapter 30-41-00 page
501/502.
Fokker 100 Ground Equipment Manual, GEM 0060.
2. Accomplishment Instructions
General
For material numbers refer to GEM 0060.
For section and paragraph numbers refer to GEM 0060.
CAUTION 1 : THE UNIT IS STATIC SENSITIVE. BE CAREFUL WHEN YOU WORK ON
ELECTROSTATIC DISCHARGE SENSITIVE (ESDS) DEVICES:
- USE AN APPROVED WRIST STRAP WHICH IS CONNECTED TO A GROUND POINT
- DO NOT TOUCH THE ELECTRIC PINS
- USE CONDUCTIVE BLANKING CAPS
- USE AN ANTI-STATIC TRANSPORT TRAY TO MOVE THE ESDS DEVICES
- DO NOT OPEN THE ESDS DEVICE, EXCEPT AT AN APPROVED STATIC-FREE
WORK STATION. ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO ESDS
DEVICES.
CAUTION 2 : USE A CONSTANT - TEMPERATURE SOLDERING IRON WHICH HAS AN INSULATION

TRANSFORMER IN ITS POWER SUPPLY. THE SOLDER STATION MUST BE
POTENTIAL FREE. CONNECT THE GROUND OF THE SOLDER STATION TO THE
GROUND OF THE UNIT. DAMAGE TO THE ELECTROSTATIC DISCHARGE
SENSITIVE DEVICES (ESDS) CAN OCCUR, IF YOU DO NOT OBEY THESE
INSTRUCTIONS.
A. Disassembly (Refer to Removal/Installation section of chapter 2 and fig.

4-1 of GEM 0060).
(1) Remove the text plate assembly (-10) (Refer to section 4.A).
(2) Remove and keep the four screws (150) and two handles with the washers
(140) from text plate (-10).
(3) Remove the inner cover (510) as follows:
(a) Remove and discard the four rivet-pops (pn FON2-6105-424BH) , which
secure the inner cover to the hinges.
(b) Remove and discard the inner cover (510).
TESBF100-30-01 Sep 01/94

Page 2
Fokker 100
B. Modification
(1) Make the modification to the texplate assembly (-10) as follows:
(a) Drill 2 holes in the textplate according detail A (Refer to
figure 1)
Note: Be carefull not to damage any components.
(b) Bond sticker pn E3-9-060X011 with double-sided adhesive tape on
the textplate (Refer to figure 1).
(c) Install switches S9 and S10 pn 2TW1-3
(2) Change the wiring as follows (Refer to figure 2):
(a) Remove wire from J4 and connect this wire to S9-3.
(b) Remove wire from T2-6 and connect this wire to S9-5.
(c) Remove wire from J6 and connect this wire to S10-3.
(d) Remove wire from T3-6 and connect this wire to S10-5.
(e) Make the following connections with wire AWG22:
S9-1 to S9-4
S9-2 to J4
S9-6 to T2-6
S10-1 to S10-4
S10-2 to J6
S10-6 to T3-6
(f) Tie up the wires on the ,cable loom. Use:
- cable tie pn MS3367-4-9 (FON9-1509-AN9).
(3) Make modification to adaptor cable assembly, pn 27 .1-4496CA0588-010 or
pn 27.1-4496CA0591-001, as follows (Refer to section Cable Assemblies
of chapter 3 and figure 4-3 of GEM 0060):
(a) Make following connections (Refer to figure 3) on the new
connector P5 pn KJ6T16A8SNL using socket pn M39029/57-358 and
splice pn M81824-1-3 according to TH53.254 and TH53.400.
P5-A to SPL6 AWG16
P5-B to SPL6 AWG16
P5-G to SPL6 AWG16
P5-C to SPL7 AWG16
P5-D to SPL7 AWG16
from SPL7 AWG22 (with a lenght of 50 cm)
P5-E AWG16 (with a lenght of 25 cm)
(b) Slide braided hose pn FON1.3624-2 over wiring of connector P5.
(c) Install and secure strain relief pn FON9-4927-16T onto connector
P5
(d) Remove the strain relief of connectors PI and P3 and slide back
the braided hose (Refer to section 4.A.I).
Sep 01/94 TESBF100-30-01

Page 3
Fokker 100
(e) Remove splice 3.

(f) Install a new splice 3 pn M81824-1-3 according to TH53.400.
In this splice connect these wires from:
Pl-S (AWG22)
P3-E (AWG16)
P5-E (AWG16)
(g) Remove splice 1.
(h) Install a new splice SPL1, pn M81824-1-3, according to TH53.400,
Pl-R (AWG22)
P3-C (AWG16)
P3-D (AWG16)
SPL7 (AWG22)
NOTE ; The following steps (i and h) are only applicable for adaptor cable
pn 27.1-4496CA0588-010.
(i) Remove the following contacts from connector PI (Refer to section
4.A. (3)).
P4-N
P4-a
(h) Add a new splice SPL8, pn M81824-1-2.
Pl-N (AWG22)
PI-a (AWG22)
P2-R (AWG22)
P4-K (AWG22)
(k) Slide braided hose back over wiring and secure it to the cable
loom and strain reliefs. Use:
- cable tie pn MS3367-4-9 (FON9-1509-AN9).
(1) Mark cable near connector P5 with P5 with indelible ink.
(m) Remark modified cable to pn 27.1-4496CA0692-017 with indelible
ink.
TESBF100-30-01 Sep 01/94

Page 4
Fokker 100
C. Assembly (Refer to section Removal/Istallation and fig.4-1 of GEM 0060)

(1) Install a new inner cover.
(a) Mount the new inner cover pn E3-9-386X031, mounted with fastener
and grommet, on the hinges (520), Use:
- 4 rivet pops pn FON2-6105-42BH.
(2) Mark the B on the Mod block on the text plate.
(3) Mount the bracket assies (160, 170) with its attaching parts to the
text plate assy (-10) use the four screws (150) and two handles and
its washers (140) that you kept in step 2.A.2.
(4) Install the modified textplate assembly (Refer to section 5.M)
D. Overall test (Refer to section Servicing of GEM 0060)

(1) Do a periodic test (refer to section 5), change test no. 2 and 10 as
follows:
Test
no. Procedures Expected result
(2) Connect DMM, set to measure AC -current
between J4 and J5 and set switch S9 to
normal .
(10) Transfer DMM to J6 and J7 and set
switch S10 to normal.
(2) Add test no. 50 thru 55.
Test
no. Procedures Expected result
50 Set switch S9 to load
51 Connect a jumper between Jl-S and Jl-R
52 Connect the ohmmeter to J4 and J5 Ohmmeter reading less than
2 Ohm
53 Switch S10 to load
54 Connect a jumper between Jl-6 and Jl-C
55 Connect the Ohmmeter to J6 and J7 Ohinmeter reading less than
2 Ohm
Sep 01/94 TESBF100-30-01

Page 5
Fokker 100
E Testing of the adapter cable.

(1) Do a test on the adapter cable (Refer to chapter 3, paragraph 10,
Testing).
(2) Add test steps IB, 1C and ID and change test step no. 5 as follows:
Test Procedures Expected result

no.
IB Connect DMM between the contacts of Continuity
connector F5 as follows
P5/A and P5/B and P5/G
1C Connect DMM between the contacts of Continuity
connector PI and P5 as follows
Pl/R and P5/C and P5/D
ID Connect DMM between contact S of PI Continuity
and E of P5
5 In turn, connect the DMM, as megohm- Greater than 100 MOhms
meter, between each contact of
connector PI and each other contact
and metal case of PI and metal case of
P2, P3, P4 and P5
3. Material Information
These parts are necessary to do this Tool and Equipment Service Bulletin on
each tool
Instructions/
New Part Number QTY Keyword Old Part Number Disposition
E3-9-060X011 1 Sticker
E3-9-386X031 1 Inner Cover E3-9-386X024 Discard
2TW1-3 2 Switch
FON2-6105-424BH 4 Rivet-Pops Discard
FON9-1509AN9 15 Cable-ties
FON9-4927-16T 1 Strainrelief
KJ6T16A8SNL 1 Connector
M39029/57-358 6 Socket
M81824-1-3 4 Splice Discard SPL1
M81824-1-2 1 Splice
FON9-1927Z-169 100cm wire
FON9-1927Z-229 50cm wire
FON1-3624-2 25cm braided hose
TESBF100-30-01 Sep 01/94

Page 6
Fokker 100
15.4 30.0 DETAIL A
DRILL ON
BACKSIDE
J2 J6
1.3 DEEP
J3 *
J5 *
J7
WINDSHIELD SLIDING WINDOW

I— 115VAC — 1— CURRENT ——— CURRENT ——
,L__J.
A View of the Textplate with the 2 drill holes
/"" J \
s
NORMAL NORMAL (
S9 + S10 + J
LOAD LOAD
+
J2
i J4 J6 I _ __ ' ^^
+ \
J3 J5 J7 + S3 ,
~(
T1
WINDSHIELD SUDING WINDOW i
— 115VAC — *— CURRENT ——— CURRENT ————————————————————— VAF/
II R1
* "^^fc. ,—-x ,,l^-— - <-—-—-.
R2
.———s r
J
A Viev of the Textplate with Sticker

Figure 1
Sep 01/94 TESBF100-30-01

Page 7
Fokker 100
BEFORE MODIFICATION.
WINDSHIELD
CURRENT
SLIDING VJNI
WINDDU
CURRENT
AFTER MODIFICATION.
Partial Circuit Diagram

Figure 2
TESBF100-30-01 Sep 01/94

Page 8
Fokker 100
PI P2
B B
C
0
E E
6 G
I
SPL8
P S
P3
ANSI 6
SPL2 ANG16
B
AW22 AW616
R C III NiHDOM HEAT INS
JSPli ANC16
AW622 SP13 AK16
S E
AN616
NC g
Pd
U B
D
E
Z
SPL8
AW22 .SPLU ANG!6
I
AKG22 .SPLS AW6I6
[^
P5
^ AK16
* , SPL6 AN616
^f>L7 A1K16
I AM6J6
FULL WINDOW HEAT INS
ANE16
«1« «
P2
• P3
• PJ.
• P5
250«m * 2Snn
lOOOi
Cable Assembly after modification

Figure 3
Sep 01/94 TESBF100-30-01

Page 9
FOKKER 100
INDICAT ING/RECORD ING SYSTEMS
Set - Dummy Sensor, Proximity Sensing System.
A. Effectivity
(1) Dummy sensor A tool number 28-0-4549-20.
Dummy sensor B tool number 28-0-4549-21.
Both dummy sensors are part of set - dummy sensors,
proximity sensing system tool number 28-0-4549.
(2) The modification will be made, before delivery, on all
set - dummy sensors, proximity sensing system tool number
28-0-4549B.
B. Reason
(1) The dummy sensors have too much play in relation to the
bracket.
This excess much play may lead to incorrect adjustment of
the proximity sensors and/or targets, which could cause
false indications and/or warnings.
This play is caused by the smaller diameter (notch) as a
result of the break-away of the thread on the dummy sensor.
The new dummy sensors A and B have the notch removed from
the thread at the side of the mounting flange.
Also, the break-away of the thread has been changed to
create a thickening with a more accurate fitting.
C. Description
- Make a modification to set - dummy sensors,
proximity sensing system tool number 28-0-4549 to
the new production standard tool number 28-0-4549B.
Page 1 2 3 4 5 6
Revision - - - - - -
Nov 15/92 TESBF100-31-01

Page 1
FOKKER 100
D'. Manpower
(1) Estimated 0,2 hour for one set - dummy sensors.
Elapsed time 0,2 hour (1 man)
E. Material - Cost and Availability

(1) The dummy sensors toolnumbers 28-0-4549-30 and
28-0-4549-31 and list of contents plate number
28-0-4549-07 can be ordered at our Spares Support
Department as a mod kit TESBF100-31-01.
The price of the mod kit is NLG,4495,=.
The mod kit will be available within 6 months after we
receive your order.
This offer is valid until May 15/93.
Customers who have purchased their original set from our
Spares Support Department can send Fokker a "no charge
purchase order" for the above-mentioned mod kit. We must
receive a "no charge purchase order" for this mod kit not
later than 6 months after the issue date given on page 1. We
will charge the above-mentioned price if we receive an order
after this 6-month period.
F. Tooling - Price and Availability

(1) Not applicable.
G. References
(1) Fokker 100 Illustrated Tool and Equipment Manual.
Fokker 100 Aircraft Maintenance Manual.
H. Other Publications Affected

(1) Not applicable.
Nov 15/92 TESBF100-31-01

Page 2
FOKKER 100
2. Accomplishment instructions
General
For all item numbers, refer to figures 1, 2 and 3.
A. Make a modification to the set - dummy sensors, proximity
sensing system tool number 28-0-4549 as follows:
(1) Remove and keep the nut and washer from the dummy sensors
marked 28-0-4549-20 and 28-0-4549-21.
(2) Discard dummy sensors marked 28-0-4549-20 and
28-0-4549-21.
(3) Put the nut and washer, that you kept in step 1, onto the
new dummy sensors 28-0-4549-30 and 28-0-4549-31.
(4) Put the dummy sensors 28-0-4549-30 and 28-0-4549-31 in the
place of the discarded dummy sensors.
(5) Remove the list of contents plate from the case and add
newly delivered list of contents plate 28-0-4549-07 to the
case.
(6) Change the part number identification from 28-0-4549 to
28-0-4549B (Refer to figure 3).
These parts are neccessary to make a modification to each tool:
Instructions,
New Part Number Qty Keyword Old Part Number Disposition
28-0-4549-30 1 Dummy Sensor A 28-0-4549-20 Replace
28-0-4549-31 1 Dummy Sensor B 28-0-4549-21 Replace
28-0-4549-07 1 List of 28-0-4549-07 Replace
contents plate
Nov 15/92 TESBF100-31-01

Page 3
FOKKER 100
OLD TOOL NUMBER 28-0-4549-20.
B-
NEW TOOL NUMBER 28-0-4549-30,
Dummy sensor A.
Figure 1
Nov 15/92 TESBF100-31-01

Page 4
FOKKER 100
OLD TOOL NUMBER 28-0-4549-21.
NEW TOOL NUMBER 28-0-4549-31,
Dummy sensor B.
Figure 2
Nov 15/92 TESBF100-31-01
Page 5
FOKKER 100
l~~ 28.0-4549 ~~|

SET-DUMMY SENSORS.
CONTENTS:
28.O-4549-04 I OFF
28.O-4549-I6 I OFF
28.O-4549-20 I OFF
28.0-454.9-21 I OFF
L J
OLD TOOL NUMBER 2 8 - 0 - 4 5 4 9 - 0 7 .
28.0-4549 B
SET-DUMMY SENSORS.
CONTENTSt
28.0-4549-04 I OFF.
28.0-4549-I6 I OFF
28.0-4549-30 I OFF
28.0-4549-3! I OFF
L J
NEW TOOL NUMBER 2 8 - 0 - 4 5 4 9 - 0 7 .
List of contents plate,

Figure 3
Nov 15/92 TESBF100-31-01

Page 6
Fokker 100
LIGHTS
Dimming Unit Testbox.
A. Effectivity
(1) Dimming unit testbox pn 28.0-4239 mod B.
(2) This change will be made, before delivery, on all testboxes -
dimming unit with tool number 28.0-4239 mod C.
B. Reason
(1) With the introduction of LED lighting panels instead of the electro
luminance lighting panels, the dimming unit is modified for supply
to^the LED lighting panel.
After modification you can use the testbox for both dimming units.
C. Description
(1) This Tool and Equipment Service Bulletin tells you how to :
- Make a modification to the textplate
- Make a modification to the heatsink
- Make a modification to the printed wiring board (PWB)
assembly
- Make a modification to the mounting plate.
(2) The incorporation of this Tool and Equipment Service Bulletin
changes the modification status to mod C.
D. Compliance
(1) Optional.
E. Manpower
(1) Estimated 8,0 hours.
Elapsed time 8 hours (1 man).
Page 1 2 3 4 5 6 7 8 9 10
Revision - - - - - - - - ~ -
Jan 14/93 TESBF100-33-01

Page 1
Fokker 100
F. Material - Cost and Availability

(1) You can order the necessary parts as a mod kit.
The price of mod kit TESBF100-33-01 is NLG 1 750,-.
The mod kit will be available within 6 months after we receive
your order.
This offer is valid until Apr 14/93.
(2) Customers who have purchased their original set from our Spares
Support Department can send Fokker a "no charge purchase order"
for the above-mentioned mod kit.
We must receive a "no charge purchase order" for this mod kit not
later than 6 months after the issue date given on page 1.
We will charge the current price if we receive an order after this
6-month period.
G. Tooling - Price and Availability
(1) Not applicable.
H. References
(1) Fokker 100 Ground Equipment Manual (GEM), GEM0162.
Fokker 100 Aircraft Maintenance Manual (AMM).
I. Other Publications Affected

(1) Fokker 100 Ground Equipment Manual (GEM), GEM0162.
2. Accomplishment- Instructions
General
- For the material numbers refer to the GEM.
- For the paragraph numbers refer to the GEM.
CAUTION 1: THE UNIT IS STATIC SENSITIVE. BE CAREFUL WHEN YOU WORK ON
ELECTROSTATIC DISCHARGE SENSITIVE (ESDS) DEVICES:
- USE AN APPROVED WRIST STRAP WHICH IS CONNECTED TO A GROUND
POINT
- DO NOT TOUCH THE ELECTRIC PINS
- USE CONDUCTIVE BLANKING CAPS
- DO NOT OPEN THE ESDS DEVICE, EXCEPT AT AN APPROVED STATIC-
FREE WORK STATION. ELECTROSTATIC DISCHARGE CAN CAUSES DA-
MAGE TO ESDS DEVICES.
TESBF100-33-01 Jan 14/93

Page 2
Fokker 100
CAUTION 2: USE A CONSTANT-TEMPERATURE SOLDERING IRON WHICH HAS AN INSU-

LATION TRANSFORMER IN ITS POWER SUPPLY. THE SOLDER STATION
MUST BE POTENTIAL FREE. CONNECT THE GROUND OF THE SOLDER
STATION TO THE GROUND OF THE UNIT. DAMAGE TO THE ELECTROSTA-
TIC DISCHARGE SENSITIVE DEVICES (ESDS) CAN OCCUR, IF YOU DO
NOT OBEY THESE INSTRUCTIONS.
A. Disassembly (Refer to section Removal and figure 4-1 and 4-2 of the
GEM)
(1) Remove the textplate assembly (-10) (Refer to section 4A).
(2) Remove the heatsink assembly (60) as follows:
(a) Remove and keep 2 screws (130), lock-washers (140) and washers
(150) from resistor R4 (120) (Refer to figure 4-2).
(b) Remove and keep 2 screws (170), lock-washers (180) and washers
(190) from resistor R5 (160).
(c) Remove and keep 2 screws (210), lock-washers (220) and washers
(230) from resistor R6 and R7 (200).
(d) Remove and keep 2 screws (250), 2 screws (270) and 4 spacers
(280).
(e) Lift away the heatsink (310).
(3) Remove the PCB assembly (10) as follows:
(a) Unscrew the lockscrews (330) and lift away PI from J58 (Refer
to figure 4-1).
(b) Remove and keep 4 screws (20), 8 washers (30), 4 washers (40)
and 4 nuts (50).
(c) Remove and keep the PCB assembly and collect the parts.
(4) Remove the mounting plate (80) as follows:
(a) Remove and keep 4 screws (90) and 4 washers (100).
(b) Remove and keep the mounting plate (80).
(5) Remove the inner cover (450) as follows:
(a) Remove and discard 4 rivet-pops pn FON2-6105-424BH which con-
nect the inner cover to the hinges.
(b) Remove and discard the inner cover (450).
Jan 14/93 TESBF100-33-01
Page 3
Fokker 100
B*. The modification.

(1) Make a modification to the textplate assembly (10) as follows:
(a) Drill 2 holes in the textplate (Refer to figure 1).
(b) Bond sticker pn E3-9-027X001 with double-sided adhesive tape
on the textplate (Refer to figure 1).
(c) Install switch S5 pn FON9-6520-1.
(d) Solder on each contact of S5 a wire AWG 20 pn FON9-1927Z209
with a length of 100 cm and make a mark on the wires.
(e) Tie up the wires on the cable loom at the rear side of the
textplate.
(2) Make a modification to the heatsink assembly (10) as follows:
(a) Drill 2 holes of 2,3 mm dia into the heatsink (Refer to fi-
gure 2).
(b) Tap 4-40 UNC thread in the drilled holes.
(c) Install resistor R12. Use:
- 1 resistor : pn RER75F4990M
- 2 screws pn NAS600-6P
- 2 lock washers pn MS35338-40
- 2 washers pn NAS620-4
- Thermal compound material number Fk08-002.
(3) Make a modification to the PCB assembly (10) (Refer to figure 4-3
of the GEM) as follows:
(a) Remove the coating in this area.
(b) Remove 4 capacitors, C101 thru C104.
(c) Change the part number of the PCB assembly to EGDUT8707A2-453.
(d) Coat the areas with coating SR900 (material number Fk09-005A).
(4) Make a modification to the mounting plate (80) as follows:
(a) Drill 8 holes of 3,5 mm dia CSK 60° to 4.1 (Refer to figure 3).
(b) Install 8 stand-offs pn FON9-1251-3.
(c) Install 4 capacitors pn EWPO-luF400V10PCT on the stand-offs
(Refer figure 3).
TESBF100-33-01 Jan 14/93

Page 4
Fokker 100
C. Assembly (Refer to section Installation and figures 4-1 and 4-2 of the
GEM).
(1) Install a new inner cover as follows:
(a) If you have a testbox with only mod B, use inner cover
pn E3-9-390X046 mounted with fastener and grommet.
(b) If you have a testbox with mod A and B, use inner cover
pn E3-9-386X025 mounted with fastener and grommet.
(c) Mount the new inner cover on the hinges. Use:
- 4 rivet-pops pn FON2-6105-424BH.
(2) Install the changed mounting plate and the changed PCB assembly
as follows:
(a) Install the changed mounting plate. Use the screws and washers
you kept in step A. (4).
(b) Install the changed PCB assembly. Use the screws and washers
you kept in step A.(3)(b).
(3) Install the changed heatsink as follows:
(a) Install the changed heatsink between the mounting brackets.
Use the screws and spacers you kept in step A.(2)(d).
(b) Install resistor R4. Use thermal compound (material number
Fk08-002) and the screws, lock washers and washers you kept in
step A.(2)(a).
(c) Install resistor R5. Use thermal compound (material number
Fk08-002) and the screws, lock washers and washers you kept in
step A.(2)(b).
(d) Install resistors R6 and R7. Use thermal compound (material num-
ber Fk08-002) and the screws, lock washers and washers you kept
in step A.(2)(c).
(4) Change the wiring as follows:
(a) Remove the connection between Pl-9 and R4-1, only on the side
of R4-1.
(b) Remove splice 4.
Jan 14/93 TESBF100-33-01

Page 5
Fokker 100
(c) Install a new splice pn M81824-1-2.

In this splice connect these wires from Pl-9
S5-2
J5-JJ
J6.
(d) Make these connections with wires AWG 20:
R4-1 to Cl-1
R4-1 to S5-3
R4-2 to Cl-2
R12-1 to S5-1
R12-2 to R4-2
Cl-1 to C2-1
Cl-2 to C2-2
C2-1 to C3-1
C2-2 to C3-2
C3-1 to C4-1
C3-2 to C4-2.
(e) Tie up the wires on the cable loom. Use:
- 15 cable ties pn FON9-1509-AN9.
(f) Identify the unit with mod C on the textplate.
(5) Install the textplate assembly (Refer to section 5M).
D. The test.
(1) Do a periodic test (Refer to the GEM chapter "Servicing").
(2) Test step 87 is changed as follows:
(a) Connect a multimeter to J6 and J7 with S5 in mode LED.
The multimeter reading is 500 Ohm plus or minus 10 Ohm.
(b) Connect multimeter to J6 and J7 with S5 in mode EL.
The multimeter reading is 2 500 Ohm plus or minus 100 Ohm.
TESBF100-33-01 Jan 14/93

Page 6
Fokker 100
These parts are necessary to do this Tool and Equipment Service Bulletin on
each tool:
Instructions/
New Part Number Qty Keyword Old Part Number Disposition
E3-9-390X046 1 Inner cover E3-9-390X038 Discard
19-9-386X025 1 Inner cover E3-9-386X019 Discard
E3-9-027X001 1 Sticker
FON9-6520-1 1 Switch
FON9-1509AN9 15 Cable ties
RER75F4990M 1 Resistor
NAS600-6P 2 Screw
MS35338-40 2 Lock washer
NAS620-4 2 Washer
FON9-1251-3 8 Stand off
FMPO-luF400V10PCT 4 Capacitor iWPO-luF400V10PCT Discard
FON2-6105-424BH 4 Rivet pop FON2-6105-424BH Discard
FON9-1927Z209 Wire AWG 20 Local source
M81824-1-2 1 Splice M81824-1-2 Discard
* Thermal
compound ** Local source
(material num-
ber Fk08-002)
SR900 * Coating ** Local source
(material num-
ber Fk09-005A)
NOTE: * Use as much as necessary.
** Refer to the CML for material numbers.
Jan 14/93 TESBF100-33-01

Page 7
Fokker 100
INTERNAL
20 OK
J54
28VDC
DRILL DETAIL S5
DRILL ON
BACKSIDE
22.3
1.3 DEEP
A View of the Modified Textplate.

Figure 1
TESBF100-33-01 Jan 14/93

Page 8
Fokker 100
A View of the Drill Holes on the Heatsink.

Figure 2
Jan 14/93 TESBF100-33-01

Page 9
Fokker 100
O
03.5 CSK 60' TO 04.1 (8X)
DC NOT WIRE UNDER COMPONENTS
- : C1//C2//C3//C4
A View of the Modified Mounting Plate.

Figure 3
TESBF100-33-01 Jan 14/93

Page 10
Fokker 100
EXHAUST F100
Thrust-Reverser - The Change of Tool Set- Groundlocks Thrust-Reverser,

28-0-4225C due to the Introduction of an Increased Gap between the
Powerplant Nacelles Thrust-Reverser Doors.
A. Effectivity
(1) Groundlock safety-plate tool number 28-0-4225-01.
Groundlock lock-pin secondary lock-latch tool number 28-0-4225-02.
Both groundlocks are part of the set- groundlocks, thrust-reverser
tool number 28-0-4225C.
Tool number 28-0-4225C is effective on configurations pre- SBF100-78-010.
Groundlock safety-plate tool number 28-0-4225-03.
Groundlock lock-pin secondary lock-latch tool number 28-0-4225-02.
Both groundlocks are part of set- groundlocks, thrust-reverser
tool number 28-0-4225D.
Tool number 28-0-4225D is effective on configurations post- SBF100-78-010.
B. Reason
(1) The modification of the powerplant nacelles thrust-reverser according
to SBF100-78-010.
The modification of the thrust-reverser is introduced to reduce fatigue loads on the
tail by increasing the spillage gap between the doors from 5 to 10 inch at full
deployment.
This increase is accomplished by introducing extended stops on the doors to create a
10 inch gap at full deployment. These extended brackets change the position of the
groundlock holes to fit the safety plate.
Page 1 2 3 4
Revision - - - -
Nov 06/93 TESBF100-78-01

Page 1
Fokker 100
C. Description
make a modification to the set- groundlocks thrust-reverser
tool number 28-0-4225C
update the set to the post-SBF100-78-010 situation tool
number 28-0-4225D.
D. Manpower
(1) Approximately 0.2 man-hours are necessary to do this Tool and Equipment Service
Bulletin on 1 set- groundlocks, thrust-reverser.
(2) Elapsed time 0.3 hour (1 man).
E. Material - Cost and Availability
(1) The safety plate tool number 28-0-4225-04,
the list of contents plate number 28-0-4225-19
and screw number 28-0-4225-08 (DIN 84 M5 x 8) can be ordered at our spares
support department as mod kit TESBF100-78-01.
The price of the mod kit is NLG 450,=.
The mod kit will be available within 4 months after we receive your order.
This offer is valid until May 15/95.
(2) Customers who have purchased their original set from our spares support department
can send Fokker a "no charge purchase order" for the above-mentioned mod kit We
must receive a "no charge purchase order" for this mod kit not later than 6 months
after the issue date given on page 1. We will charge the above-mentioned price if we
receive your order after this 6-month period.
F. References
(1) Fokker 100 Aircraft Maintenance Manual (AMM).
Fokker 100 Illustrated Tool and Equipment Manual (ITEM).
Fokker Service Bulletin SBF100-78-010.
G. Other Publications Affected

(1) Not applicable.
TESBF100-78-01 Nov 06/93

Page 2
Fokker 100
2. Accomplishment Instructions
General
- These instructions are applicable to one Set- groundlocks, Thrust-Reverser.
NOTE: The lock-pin secondary lock hatch item 28-0-4225-02 does not change.
A. Assembly Item 01.

(1) Remove and keep screw item 08, 2 x lanyard item 12, 2 x key ring item 10 and 2 x
quick release pin item 07.
(2) Discard old safety plate item 05.
B. Assembly Item 03.
(1) Assemble item 08,12,10 and 07 (items from step 1) with new safety plate 04 and
second screw 08 (Refer to figure 1).
Secure both screws items 08 with loctite (local supply).
C. Case item 20.
(1) Remove the old list of contents plate from the inside of the case and exchange it with
the new list of contents plate item 19.
(2) Adapt cutout in foam to fit new dimensions of assembly item 03.
(3) On the outside of the case change the part number identification
from 28-0-4225C to 28-0-4225D.
These parts are necessary to do this Tool Service and Equipment Bulletin on 1 set:
Instructions/
New Part Number Qtv Keyword Old Part Number Disposition
28-0-4225-04 1 28-0-4225-05 Replace

28-0-4225-08 1 Srew 28-0-4225-08 Add
28-0-4225-19 1 List of contents 28-0-4225-17 Replace
Nov 06/93 TESBF100-78-01

Pages
Fokker 100
Set- Groundlocks Thrust-Reverser.

Figure 1
TESBF100-78-01 Nov 06/93

Page 4
FOKKER 70/100
SPECIAL TOOLS NON-DESTRUCTIVE INSPECTION
PART NUMBER KEYWORD AND PART DESCRIPTION

S0128A SET - MAGNETIC PARTICLE INSPECTION
S0158 PROBE - EC CALIBRATION
S0168 PLATE - EC CALIBRATION
50170 PLATE - EC CALIBRATION
50171 PROBE - EC CALIBRATION
50172 PROBE - EC CALIBRATION, RSM35/5.1
50173 PROBE - EC CALIBRATION, RSM35/5.6
50174 CABLE - INTERCONNECTING, WITH MINI ROTOR
SOUS BLOCK - CALIBRATION
28-0-6004 PLATE - CALIBRATION
PAGE 1/2
nn nn
-UU-UU AUG 01/98
FOKKER 70/100
A member of
Deutsche Aerospace
TABLE OF CONTENTS
PART NUMBER KEYWORD AND PART DESCRIPTION CH-SE-SU PAGE

NON-DESTRUCTIVE INSPECTION EQUIPMENT 05-00-00 1
05 CONTENTS
FOKKER 70/100


E E
LEP 1/2 AUG 01/98 R
CONTENTS 1/2 SEP 01/94
05-00-00 1/2 AUG 01/98 R
PAGE 1/2
LEP CHAPTER 05 AUG 01/98
FOKKER70/100
RECORD OF TEMPORARY REVISIONS
After insertion of a Temporary Revision in this manual, fill in the table.

Below by noting down: Revision number, Date of Issue, Initials of the person
who inserted the revision and the date of this action.
After a removal of a Temporary Revision from this manual, complete the table
below by noting down the initials of the person who removed the Revision and
the date of this action.
TEMP. DATE OF INSERTED BY DATE REMOVED BY DATE

REVISION ISSUE
NUMBER
31-001 SEP 15/02 FOKKER SEP 15/02 FOKKER AUG 01/03
RECORD OF TEMPORARY REVISIONS PAGE 1

FOKKER 70/100
Deutscne Aerospace


E E
LEP 1/2 SEP 01/94
07-11-00 201 SEP 01/94
07-11-00 202 SEP 01/94
07-11-00 203 SEP 01/94
07-11-00 204 SEP 01/94
07-11-00 205 SEP 01/94
07-11-00 206 SEP 01/94
07-11-00 207 SEP 01/94
07-11-00 208 SEP 01/94
07-11-00 209 SEP 01/94
07-11-00 210 SEP 01/94
07-12-00 201 SEP 01/94
07-12-00 202 SEP 01/94
07-12-00 203 SEP 01/94
07-12-00 204 SEP 01/94
PAGE 1/2
LEP CHAPTER 07 SEP 01/94
FOKKER 70/100
Amernber of
Deutscne Aerospace
TABLE OF CONTENTS
'PART NUMBER KEYWORD AND PART DESCRIPTION CH-SE-SU PAGE

DT06-23 JACK - MECHANICAL FRONT FUSELAGE 07-11-00 201
DT25-26 JACK - MECHANICAL WING 07-11-00 202
DT25-26E JACK - ELECTRICAL WING 07-11-00 202
DT25-26K JACK - PNEUMATIC WING 07-11-00 202
MS01 SUPPORT - REAR FUSELAGE 07-11-00 203
RL30-14 JACK - CANTILEVER, MAIN AND NOSE GEAR 07-11-00 204
28-0-1066D JACKPAD - WING 07-11-00 205
28-0-4922 ADAPTER - MAIN LANDING GEAR JACK 07-11-00 206
28-0-1067H ADAPTER - FRONT FUSELAGE JACK 07-11-00 208
RC25-08 JACK - MAIN AND NOSE GEAR 07-11-00 209
SSLM6-12-15 JACK - NOSE GEAR 07-11-00 209
TMHCP18-00-00 JACK - MAIN AND NOSE GEAR 07-11-00 209
TMHNA10-00-00 ADAPTER - JACKING, NOSE LANDING GEAR 07-11-00 210
28-0-1738C WINCH - PORTABLE 07-12-00 202
60-16 KIT - AIRCRAFT COMPONENTS WINCH 07-12-00 202
07 CONTENTS
FOKKER 70/100
A member of
DeutscfteAerosDace
Part number : DT06-23

JACK - MECHANICAL FRONT FUSELAGE
2400mm
(94,5 in.)
1734mm
(68,27m.
F100-TEM-0081a
Usage : To jack the aircraft at front fuselage jacking points. To be used

with p/n 28-0-1067H.
Parts list : FOR PARTS AND MAINTENANCE INFORMATION, REFER TO VENDOR
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
Weight and
packaging : 360 kg (792,95 Ib).
Vendor code : D2029.
PAGE 201
-00 SEP 01/94
FOKKER 70/100
A member of
oeutscne Aerosoace
Part number : DT25-26

JACK - MECHANICAL WING
2600mm
(102in)
VIEW A 810mm
Usage : To jack the aircraft at wing jacking points. To be used with

p/n 28-0-1066D.
DOCUMENTATION.
Effectivity : All.
Weight and
packaging : 320 kg (705.47 Ib).
Quantity : 2 off.
NOTE: This tool is also available as an electrical-hydraulic
powered jack (p/n DT25-26E), or as a pneumatic-hydraulic
powered jack (p/n DT25-26K).
KMbt L
-i -< nn
- I I-UU
PAGE ^
202
SEP 01/94
FOKKER 70/100
Deutsche Aerospace
Part number : MS01

SUPPORT - REAR FUSELAGE
FIOO-TEM-0079
Usage : To support the rear fuselage.

DOCUMENTATION.
Effectivity : All.
Weight and
Quantity : 1 off.
PAGE 203
07-11 -00 SEP 01/94
FOKKER 70/100
A member of
Deutscfte Aerospace
Part number : RL30-14

JACK - CANTILEVER, MAIN AND NOSE GEAR
DIMENSIONS T.B.D.
F100-TEM-0199
Usage : To jack the aircraft for changing wheels and brake units.
Tool
consists of : A. Jack
B. NLG adapter
C. Pin
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
Weight and
PA6E 204
rw -M nn
U/-1 1-UU SEP 01/94
FOKKER 70/100
A member of
Deutscfie Aerospace
Part number : 28-0-1066D

JACKPAD - WING
173mm
(6,81 in)
F100-TEM-0001
Usage To jack the aircraft at wing jacking points. To be used with

p/n DT25-26.
Tool
consists of A. Adapter 28-0-1066-01 1 off
B. Shackle, harp 28-0-1066-05 1 off
Parts list Part A
1. Adapter 28-0-1066-02 1 off
2. Pin, spring MS16562-52 1 off
3. Ring 28-0-1066-04 1 off
Effectivity All.
Quanti ty 2 off.
PAGE 205
-00 SEP 01/94
FOKKER 70/100
_
Deutscne Aerospace
Part number : 28-0-4922

ADAPTER - MAIN LANDING GEAR JACK
100mm
(3,9in)
60mm
(2,4in)
600mm
(23,6in)
F100-TEM-0391
PAGt
PAGE Z05
H7 11 nn
U / ~ I I-UU
206
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : 28-0-4922 Cont'd

ADAPTER - MAIN LANDING GEAR JACK
Usage To lift the MLG for tire and wheel change.

Tool
consists of A. Adapter 28-0-4922-01 1 off
B. Fixture 28-0-4922-02 1 off
C. Fixture, holding 28-0-4922-03 1 off
Effectivity All.
Finish The adapter is colored yellow.
Weight and
packaging 33 kg (72,7 Ib).
Quanti ty 1 off.
bt 207
u/
c\"7 H H nn
U / - 1 I-UU
™
PAGE *
SEP 01/94
FOKKER 70/100
A member of
DCUtSCflC AGTOS03C6
Part number : 28-0-1067H

ADAPTER - FRONT FUSELAGE JACK
160mm
(6,29 in)
138mm
,(5.43in)
144mm
(5,66in)
ftOO-TEM-0080
Usage To jack the aircraft at front fuselage jacking point. To be used

with p/n DT06-23.
Parts list 1. Adapter 28-0-1067-01 1 off
2. Pin MS16562-29 6 off
3. Bolt 28-0-1067-06 6 off
4. Eyebolt 28-0-1067-07 1 off
5. Pin MS24665-304 2 off
6. Nut 28-0-1067-18 1 off
7. Shackle 28-0-1067-19 1 off
8. Pad 28-0-1067-25 1 off
Effectivity : A l l .
Finish : Painted red.
Quantity : 1 off.
PAGE 208
07-11-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : TMHCP18-00-00

JACK - MAIN AND NOSE GEAR
200mm
(7.9 in)
260mm
(10.2m)
VIEW A
F100-TEM-0376
Usage To jack the MLG and NLG for wheel/brake replacement. When used on
NLG, use in conjunction with p/n TMHNA10-00-00.
Effectivity All.
Finish The jack is colored yellow (other on request).
Weight and
packaging 35 kg (77 Ib).
Quanti ty 1 off.
Vendor code F8303.
NOTE; Optional tools
P/N RC25-08 cap 25t; vendor code : D2029
P/N SSLM6-12-15 NOSE GEAR ONLY cap 6t; vendor code : U2041
PAGE 209
07-11-00 SEP 01/94
FOKKER 70/100
Amwnber of
Dcutschc Afifoswce
Part number : TMHNA10-00-00

ADAPTER - JACKING, NOSE LANDING GEAR
300mm
(11,Sin)
195mm
(7,7 in)
135mm
(5,3 in)
VIEW A
F100-TEH-0377
Usage To lift the NLG for wheel change in the situation of two flat
tires. Use in conjunction with p/n TMHCP18-00-00.
Effectivity All.
Finish The jack is colored yellow (other on request).
Weight and
Quantity 1 off.
Vendor code : F8303.
PAGE 210
07-11-00 SEP 01/94
FOKKER 70/100
Deutscfic AerosMce
THIS PAGE LEFT BLANK INTENTIONALLY
PAGE 201
07-12-00 SEP 01/94
FOKKER 70/100
oeutscne Aerosoace
Part number : 28-0-1738C

WINCH - PORTABLE
F100-TEM-0024
Usage To hoist components throughout the aircraft.

Tool
consists of A. Winch 2, 5cwt 60/1 1 off
B. Handle winding 41/164 1 off
C. Tube extension 41/99 1 off
D. Hook top sheath 41/63 1 off
E. Hook, detachable 41/76 1 off
F. Tube, extension 28-0-1738-09 1 off
Parts list Part A,B,C,D and E:
FOR PARTS AND MAINTENANCE INFORMATION, REFER TO VENDOR
DOCUMENTATION.
Part F:
1. End, thread 28-0-1738-10 2 off
2. Nut 28-0-1738-11 2 off
3. Tube 28-0-1738-12 1 off
Effectivity : All.
Weight and
packaging 18.2 kg (40 Ib).
Quanti ty 1 off.
PAGE 202
07-12-00 SEP 01/94
FOKKER 70/100
A member of
Deutsctie Aerospace
Part number : 28-0-1738C Cont'd

WINCH - PORTABLE
Vendor code : K1425 (Parts A,B,C,D and E)

NOTE; A complete set can be ordered at the vendor under p/n 60-16
rMbt
re? ^ o nn
Of- I£-UU
PAGE *»«/**»
203/204
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace


E E
LEP 1/2 SEP 01/94
08-30-00 201 SEP 01/94
08-30-00 202 SEP 01/94
08-30-00 203 SEP 01/94
08-30-00 204 SEP 01/94
LEP CHAPTER 08
FOKKER 70/100
DcutscneAerosoace
TABLE OF CONTENTS

28-0-1604 FIXTURE - PLUMBLINE 08-30-00 201
28-0-4195 FIXTURE - MEASURING 08-30-00 202
AN60-5-00006-1 SET - AIRCRAFT WEIGHING 08-30-00 204
08 CONTENTS
FOKKER 70/100
A member of
Deutsche Aerospace

FIXTURE - PLUMBLINE
95mm
118mm (3,74 in)
(4,64 in)
38mm
(U9in)
F100-TEM-0002
Usage : To obtain balancing measurements during weighing and balancing.

Parts list 1. Bolt 28-0-1604-01 2 off
2. Angle 28-0-1604-05 1 off
3. Pin 28-0-1604-06 1 off
4. Cord 28-0-1604-07 1 off
5. Plumb 28-0-1604-08 1 off
Effecti vi ty : Al1.
Quantity : 1 off.
PAGE 201
08-30-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

FIXTURE - MEASURING
10
F100-TEM-0160a
PAGE 202
08-30-00
FOKKER 70/100
A member of
Deutscne Aerospace

FIXTURE - MEASURING
Usage To establish a reference line between the center of the main

wheels and a reference point at the center of the nose wheel for
weight and balance purposes.
Tool
consists of A. Cover assembly 28-0-4195-01 2 off
B. Pin assembly 28-0-4195-02 1 off
C. Case 28-0-4195-35 1 off
Parts list Part A (1 assembly)
1. Bolt 28-0-4195-10 6 off
2. Washer AN960C4 6 off
3. Latch FON7-5136 3 off
4. Cover 28-0-4195-03 1 off
5. Sheet 28-0-4195-04 3 off
6. Screw 28-0-4195-11 6 off
Connection between two parts A
7. Elastic 28-0-4195-18 1 off
8. Bar 28-0-4195-17 2 off
Part B
9. Pin 28-0-4195-05 1 off
10. Fastening cable 28-0-4195-43 1 off
Effectivity All.
Finish A caution flag must be attached to Part B of this tool (refer to
chapter 20).
Weight and
packaging 1 case.
Quanti ty 1 off.
PAGE 203
08-30-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : AN60-5-00006-1

SET - AIRCRAFT WEIGHING
WHEEL WEIGHER
ASSY
SECONDARY
RAMP
ENTRY RAMP
F50-TEM-0352
Usage To weight the aircraft.

Parts list FOR PARTS AND MAINTENANCE INFORMATION, REFER TO VENDOR
DOCUMENTATION.
Effectivity : All.
Weight and
packaging Weigher platform assy 52 kg (115 Ib)
Assembled entry and secondary ramps 51 kg (113 Ib).
Quantity 1 off
Vendor code 06433.
PAGE 204
08-30-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace


E E
LEP 1/2 SEP 01/94
09-10-00 201 SEP 01/94
09-10-00 202 SEP 01/94
09-10-00 203 SEP 01/94
09-10-00 204 SEP 01/94
LEP CHAPTER 09
FOKKER 70/100
A member of
Deutscne Aerospace
TABLE OF CONTENTS
"PART NUMBER KEYWORD AND PART DESCRIPTION CH-SE-SU PAGE

AS57 TOWBAR 09-10-00 201
AS57-001 TOWBAR (ALTERNATIVE) 09-10-00 201
SSTF100L TOWBAR (ALTERNATIVE) 09-10-00 201
SSTF100S TOWBAR (ALTERNATIVE) 09-10-00 201
28-0-4075 BRIDLE - TOWING 09-10-00 202
01-1236-0000 TOWBAR - SPECIAL PURPOSE 09-10-00 203
09 CONTENTS
FOKKER 70/100
Amemberof
Deutsche Aeroswce
Part number : AS57

TOWBAR
F100-TEM-0082a
Usage To tow the aircraft at the nose gear towing point.

DOCUMENTATION.
Effectivity : All.
Weight and
Quantity 1 off.
Vendor code D2029
NOTE: P/N SSTF100L (Luxury version); vendor code: # F152
or
P/N SSTF100S (Standard version); vendor code: # F152
or
P/N AS57-001 (Without springcushion); vendor code: D2029
PAGE 201
09-10-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

BRIDLE - TOWING
400mm 1
(15.7 in) I
F100-TEM-0161a
Usage : To tow the aircraft on the main landing gear.

Tool
consists of : A. D shackle
B. D shackle
C. Towing strap
D. Case
Parts list : FOR PARTS AND MAINTENANCE INFORMATION, REFER TO THE GROUND
EQUIPMENT MANUAL, GEM 0156
Effectivity : All.
Weight and
packaging : 134 kg (295 Ib), 2 cases.
Quantity : 1 off.
PAGE 202
09-1 0-00 SEPOl/94
FOKKER 70/100
Deutscne Aerospace
Part number : 01-1236-0000

TOWBAR - SPECIAL PURPOSE
4-13 mm
(16.25 in)
4585
VIEW
F100-TEM-09001
Usage To tow the aircraft at the nose gear towing point (the towbar tube
is in two pieces and the head is a separate part).
NOTE: This towbar is used to move the aircraft on Ferry or VIP
flights only. For normal aircraft movement, you must use the
towbar AS57 or equivalent.
DOCUMENTATION.
Effectivity : All.
Weight and
packaging 70 kg (155 Ib)
Finish painted blue enamel.
Quantity 1 off.
Vendor code 59603.
PAGE 203/204
09-10-00 SEP 01/94
FOKKER70/100

E E
LEP 1/2 AUG 01/03 R

CONTENTS 1/2 AUG 01/03 R
10-10-00 201 AUG 01/03 R
10-10-00 202 SEP 01/94
10-11-00 201 SEP 01/94
10-11-00 202 MAR 01/95
10-11-00 203 SEP 01/94
10-11-00 204 SEP 01/94
10-11-00 205 SEP 01/94
10-11-00 206 SEP 01/94
10-11-00 207 SEP 01/94
10-11-00 208 SEP 01/94
10-11-00 209 SEP 01/94
10-11-00 210 SEP 01/94
10-11-00 211 SEP 01/94
10-11-00 212 MAR 01/95
10-11-00 213 SEP 01/94
10-11-00 214 SEP 01/94
10-11-00 215 AUG 01/99
10-11-00 216 SEP 01/94
10-11-00 217 SEP 01/94
10-11-00 218 SEP 01/94
Page 1/2
FOKKER70/100
TABLE OF CONTENTS
200548001A SHACKLE - MOORING 10-10-00 201

28-0-1233 PIN - GROUNDLOCK 10-11-00 201
28-0-1707 PLUG - COVERING, ALTERNATE- AND PRESS CABIN 10-11-00 202
STATIC PORTS
28-0-2493 COVER PITOT 10-11-00 203
28-0-4088 COVER AIRCO COOLING AIR INLET 10-11-00 204
28-0-4089 COVER APU VENTILATION AIR INLET 10-11-00 205
28-0-4091 COVER APU EXHAUST 10-11-00 206
28-0-4090 COVER APU OIL-COOLER OUTLET 10-11-00 208
28-0-4092 COVER AIRCO COOLING AIR OUTLET 10-11-00 209
28-0-4137 SET - COVERING PLATES, STATIC PORTS 10-11-00 210
28-0-4105 COVER - ENGINE AIR INTKE 10-11-00 212
28-0-4219 COVER - ENGINE EXHAUST 10-11-00 213
28-0-4255 COVER - NOSE WHEEL 10-11-00 214
28-0-4256 COVER - MAIN WHEEL 10-11-00 215
AW10 SET - WHEEL CHOCK 10-11-00 216
28-0-4076 SET - MAIN WHEEL CHOCK 10-11-00 217
28-0-1476D COVER - FLAP TRAILING EDGES 10-11-00 218
Page 1/2
10 CONTENTS AUG 01/03
FOKKER70/100
Part number : 200548001A

SHACKLE - MOORING
Usage : To be used for attachment of mooring cables to the nose landing

gear strut.
Tool consist of:
A. Bolt 2000328-733 1 off
B. Nut 2000328-732 1 off
C. Pin-lock BS-SP90C5 1 off
D. Shackle 2000328-216 1 off
NOTE: Shackle Mooring is obtainable from Fokker under
p/n 28-0-1981.
Effectivity All .
Quantity 1 off.
Vendor code K0654.
PAGE 201/202
10-10-00 AUG 01/03
FOKKER 70/100
A member of
Deutsche Aerospace

PIN - GROUNDLOCK
F100-T EM-0083
Usage To lock nose and main landing gear in down position. One set
(3 off) ground locks is contractually delivered with the aircraft,
Effectivity All.
Finish A caution flag must be attached to this tool (refer to
chapter 20).
Quantity 3 off.
KAtit: U1
-ilU-1
n H -fI-UU
nn PAGE *201
SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace

PLUG - COVERING, ALTERNATE - AND PRESS. CABIN STATIC PORTS
19mm
F100-TEM-0086a
Usage : To prevent ingress of dirt and moisture, when the aircraft is

parked or cleaned.
Parts list : 1. Stop 28-0-1707-03 1 off
2. Pin MS24665-304 1 off
3. Ring FON2-9110-16 1 off
4. Label 28-0-1707-10 1 off
Effectivity : All.
Finish : A caution flag must be attached to this tool (refer to
chapter 20).
| Quantity : 2 off.
PAGE 202
10-11 -00 MAR 01/95
FOKKER 70/100
Amemberof
Deutsche Aerospace

COVER - PITOT
C A U T I O N FLAG
F100-TEM-0005a
Usage : To prevent ingress of moisture and dirt when the aircraft is

parked or cleaned.
Effectivity : All.
chapter 20).
Quantity : 3 off.
PAGE 203
-iID-
n -\1 nn
I l-UU SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

COVER - AIRCO COOLING AIR INLET
75mm
(2,95 in)
F100-TEM-0171a
Usage : To prevent ingress of dirt and moisture when the aircraft is

parked or cleaned.
Effectivity : All.
Finish : The cover is colored red.
Quantity : 2 off.
PAGE 204
AlnU --\ M4- nn
UU SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

COVER - APU VENTILATION AIR INLET
75mm
(2,95 in)
125mirT
(4,92 in)
F100-TEM-0168a
Usage To prevent ingress of dirt and moisture when the aircraft is

parked or cleaned.
Effactivity All.
Finish The cover is colored red.
Quanti ty 1 off.
PAGE 205
10-11-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

COVER - APU EXHAUST
5 19
13
12
10
F100-TEM-0169a
Usage To prevent ingress of dirt and moisture in the APU exhaust, when
the aircraft is parked or cleaned.
Tool
consists of A. Cover assembly 28-0-4091-02 1 off
Parts list Part B
1. Nut-self locking 28-0-4091-24 1 off
2. Washer DIN125-8-4STAA- 1 off
3. Bar-threaded 28-0-4091-05 1 off
4. Spring 28-0-4092-27 1 off
5. Screw-adjustment 28-0-4091-23 1 off
6. Spindle 28-0-4091-13 1 off
7. Bush 28-0-4091-12 2 off
8. Snubber 28-0-4091-06 1 off
9. Screw-countersink DIN963M4xl2ZAA- 4 off
10. Support 28-0-4091-09 1 off
11. Screw-countersink DIN963M5x25ZAA- 2 off
12. Nut-self locking 28-0-4091-20 2 off
13. Washer DIN125-5-3STAA- 2 off
14. Handle 28-0-4091-18 1 off
15. Frame 28-0-4091-07 1 off
16. Seal 28-0-4091-26 1 off
17. Screw 28-0-4091-28 4 off
18. Support 28-0-4091-04 2 off
19. Plate 28-0-4091-08 1 off
PAGE 206
10-11-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace
I Part number : 28-0-4091 Cont'd

/ COVER - APU EXHAUST
Effectivity : All.
Finish : The cover is colored red. A caution flag must be attached to this
tool (refer to chapter 20).
Weight and
packaging : 1.6 kg (3,5 Ib).
Quantity : 1 off.
nn PAGE 207
-UU SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

COVER - APU OIL-COOLER OUTLET
75mm
(2,95 in)
440mm
(17,32 in)
F100-TEM-0170a
Usage : To prevent ingress of dirt and moisture when the aircraft is

parked or cleaned.
Effectivity : All.
Finish : The cover is colored red.
Quantity : 1 off.
PAGE 208
H1U-
n Î -\I-UU
nn SEP 01/94
FOKKER 70/100
jerof
Deutsche Aerospace

COVER - AIRCO COOLING AIR OUTLET
75mm
(2,95 in)
120mm
(4,72 in)
F100-TEM-OT72a

parked or cleaned.
Effactivity All.
Finish The cover is colored red.
Quantity 2 off.
PAGE 209
10-11-00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aeroswce

SET - COVERING PLATES, STATIC PORTS
150mm
!5f90in)
150mm
(5,90in)
182mm
(7,16in)
327mm
(T2,87in)
VIEW B
VIEW A
F100-TEM-0163a
PAGE 21
•i\\j-i
n ^ 1-UU
i nn °
SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SET - COVERING PLATES, STATIC PORTS

parked or cleaned.
Tool
consists of A. Plate assembly 28-0-4137-01 2 off
B. Plate assembly 28-0-4137-02 1 off
C. Bolt assembly 28-0-4137-03 6 off
Parts list : Part A
1. Plate 28-0-4137-04 1 off
2. Sheet-rubber 28-0-4137-05 1 off
3. Cable-fastening 28-0-4137-11 3 off
4. Ring-key FON2-91 10-16 1 off
5. Plate-name 28-0-4137-15 1 off
6. Plate 28-0-4137-24 2 off
7. Photosensitive sheet 28-0-4137-25 1 off
Part B
1. Plate 28-0-4137-06 1 off
3. Cable-fastening 28-0-4137-11 3 off
5. Plate-name 28-0-4137-15 1 off
6. Plate 28-0-4137-24 2 off
7. Photosensitive sheet 28-0-4137-26 1 off
Part C
1. Nut-hand FON8-1204-M6 1 off
2. Washer 28-0-4137-09 1 off
3. Bolt 28-0-4137-10 1 off
Effectivity : All.
chapter 20).
Quanti ty : 1 off.
PAGE 211
10-11-00 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace

COVER - ENGINE AIR INTAKE
FK)0-TEM-0166a
Usage To cover the engine air intake from entrance of dirt and moisture
when the aircraft is parked or cleaned.
Effectivity : All.
Weight and
Quantity : 2 off.
PAGE 212
10-11-00 MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace

COVER - ENGINE EXHAUST
250mm
(9,84 in)
1000mm
(39,37m)
F100-TEM-0167a
Usage To cover the engine exhaust from entrance of dirt and moisture,
when the aircraft is cleaned or parked.
Effectivity : All.
Weight and
Quanti ty 2 off.
PAGE 213
10-11-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

COVER - NOSE WHEEL
508mm
(19,99 in)
505mm
(19,88 in)
245 mm
(9,64 in)
F100-TEM-0165
Usage To protect the tyre/wheel assembly during long term parking or

cleaning.
Effectivity All.
Quantity 2 off.
PAGE 214
10-11-00 SEP 01/94
FOKKER70/100

COVER - MAIN WHEEL
852mm
(33,54m)
925mm
(36,41in)
310mm
(12,20 in)
F100-TEM-0164
Usage To protect the tyre/wheel assembly during long term parking or

cleaning.
Effectivity All.
Quantity 4 off.
PAGE 215
10-11-00 AUG 01/99
FOKKER70/100
Part number : AW10

SET -WHEEL CHOCK
254mm
HOin)
Usage To chock the main and nose wheels during parking.

Effectivity All.
Weight and
packaging 8.5 kg (18,7 ID).
Quantity 3 off.
Vendor code 72384.
PAGE 216
10-11-00 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

SET - MAIN WHEEL CHOCKS
1001mm
(39.4 in)
VIEW D
F100-TEM-0162a
Usage To chock the main wheels during engine run.

Tool
consists of A. Chock assembly 28-0-4076-02 4 off
B. Chain 28-0-4076-30 4 off
C. Spring 28-0-4076-35 4 off
Parts list Part A
1. Screw DIN912M8x20ZAA- 1 off
2. Washer 28-0-4076-19 1 off
3. Nameplate FON7-1317A 1 off
4. Sheet 28-0-4076-26 2 off
Effectivity : All.
Weight and
packaging : 22.5 kg (49,6 Ib)
Quanti ty : 1 off.
PAGE 217
10-11 -00 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace

COVER - FLAP TRAILING EDGES
F100-TEM-0301
Usage : To protect personnel against injury from the flap trailing edges,
Effectivity : All.
chapter 20).
Quantity : 14 off.
PAGE 218
10-11 -00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace


E E
LEP 1/2 MAR 01/95 R
12-00-00 301 SEP 01/94
12-00-00 302 SEP 01/94
12-11-03 301 SEP 01/94
12-11-03 302 SEP 01/94
12-12-02 301 SEP 01/94
12-12-02 302 SEP 01/94
12-13-02 301 SEP 01/94
12-13-02 302 SEP 01/94
12-14-01 301 SEP 01/94
12-14-01 302 SEP 01/94
12-14-01 303 SEP 01/94
12-14-01 304 SEP 01/94
12-21-01 301 SEP 01/94
12-21-01 302 SEP 01/94
12-21-01 303 SEP 01/94
12-21-01 304 MAR 01/95 R
12-21-01 305 MAR 01/95 R
12-21-01 306 SEP 01/94
12-21-01 307 SEP 01/94
12-21-01 308 SEP 01/94
12-93-00 301 SEP 01/94
12-93-00 302 SEP 01/94
12-93-00 303 SEP 01/94
12-93-00 304 SEP 01/94
PAGE 1/2
LEP CHAPTER 12 MAR 01/95
FOKKER 70/100
Deutsche Aerospace
TABLE OF CONTENTS

AL25-3X6 LADDER - INSPECTION 12-00-00 301
28-0-1978A JAR - FUEL DRAIN 12-11-03 301
UZ7S5 GUN - HYD SYSTEM REPLENISHING 12-12-02 301
UZ893-5 GUN - HYD SYSTEM REPLENISHING 12-12-02 302
1991 GUN - OIL REPLENISHING 12-13-02 301
28-0-1614C CART - NITROGEN CHARGING 12-14-01 301
28-0-1950C KIT - ACCUMULATORS CHARGING 12-14-01 302
28-0-2771H SET - MINI NIPPLES GREASING 12-21-01 302
28-0-1569C CAN - FLAP MAIN DRIVE GEARBOX OIL 12-21-01 304
28-0-2758 CAN - FLAP GEARBOX OIL 12-21-01 305
W01 ADAPTER - GREASING 12-21-01 306
8483 DOCK - TAIL 12-93-00 302
88149-02C DOCK - TAIL 12-93-00 302
12 CONTENTS
FOKKER 70/100
oeutscfte Aerosoace
Par number : AL25-3x6

LADDER - INSPECTION
F100-TEM-0413
Usage : To inspect and service the engines and CSD. The ladder consists of
three detachable parts.
Folded dimensions : 1.75 - 3.73 m (5,74 ft - 12,23 ft).
Weight : 13 kg (29 Ib).
Effectivity : All.
Quanti ty : 1 off.
Vendor code : H7807.
PAGE 301/302
12-00-00 SEP 01/94
FOKKER 70/100
Amennbcr of
Deutscne Aeroswce
Part number : 28-0-1978A

JAR - FUEL DRAIN
165mm
"
VIEW A F100-TEM-0006
Usage To check fuel for water contamination.

Parts list 1. Drain valve 28-0-1978-01 1 off
2. Funnel FT 16 1 off
3. Clamp BSSP91C 1 off
4. Tube 28-0-1978-09 1 off
5. Bottle 10122 1 off
6. Body 28-0-1978-02 1 off
7. Nut NAS509-5 1 off
8. Washer AN960PD516 1 off
9. Stem 28-0-1978-03 1 off
10. Screwcap 10020 1 off
Effectivity All.
Quantity 1 off.
Vendor Part 2
Code: H3858
Part 5 and 10
Code: H1261
PAGE 301/302
12-11-03 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : UZ7S5

GUN - HYD SYSTEM REPLENISHING
F100-TEM-0028
Usage Replenishing gun for Skydrol BOOB to fit one U.S. quart flat top
can.
Tool
consists of A. Gun-basic
B. Hose
C. Adapter
D. Coupling
E. Filter element
F. Seal kit
G. Dust cap
DOCUMENTATION.
Effectivity All.
Quanti ty 1 off.
Vendor code K6057.
PAGE 301
12-12-02 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : UZ893-5

GUN - HYD SYSTEM REPLENISHING (SKYDROL)
(COMPLETE WITH STAND)
F100-TEM-0027a
Usage Replenishing gun for Skydrol 500B to fit one U.S. gallon screw top
can.
Tool
consists of A. Gun-basic
B. Hose
C. Adapter
D. Adapter
E. Coupling
F. Filter element
G. Seal set with hex key
H. Dust cap
J. Stand
DOCUMENTATION.
Effectivity All.
Quanti ty 1 off.
Vendor code Part A,B,C,D,E,F and G
code: K6057
Part E is also available from
code: 16717
PAGE 302
-I\dr\dr\JC.
O -I O HO SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : 1991

GUN - OIL REPLENISHING
475mm
(18,7in)
F100-TEM-0092
Usage Replenishing gun for Engine/IDG and APU oil.

Tool
consists of : A. Body assy
B. Hose assy
C. Sight glass/bleed valve assy
D. Coupling
E. Seal kit
F. Filter assy
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
Vendor code : K6057.
PAGE 301/302
12-13-02 SEP 01/94
FOKKER 70/100
Deutscric Aerospace

CART - NITROGEN CHARGING
770mm
(30,3 in)
F100-TEM-0087
Usage To fill or recharge the main or nose gear oleo struts, hydraulic
accumulators and the tyres.
Tool
consists of : A. Trolley
B. Nitrogen bottle
C. Wrench
D. Hose assy
E. Hose assy
F. Hose assy
6. Wrench
Parts list : FOR PARTS AND MAINTENANCE INFORMATION, REFER TO GROUND EQUIPMENT
MANUAL, GEM 0051.
Effectivity : All.
Finish : Skydrol resistant paint.
Quantity : 1 off.
PAGE 301
-il4-U
>i rnI SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

KIT - ACCUMULATORS CHARGING
203,2mm
( Sin )
r
203,2mm
( 8 In }
355,6mm
" "
F100-TEM-0089
PAGE 302
12-14-01 SEP 01/94
FOKKER 70/100
Amwnbcr of
oeutscne Aerosoace

KIT - ACCUMULATORS CHARGING
Usage To charge the accumulators.

Tool
consists of A. Gauge head assy
B. Inflation assy
C. Adapter assy
D. Handnut bleeder assy
E. Hose assy
F. Wrench
G. Metal box assy
Parts list FOR PARTS AND MAINTENANCE INFORMATION, REFER TO GROUND EQUIPMENT
MANUAL, GEM 0063.
Weight and
packaging 1 metal box.
Effectivity All.
Quantity 1 off.
PAGE 303/304
12-14-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
PAGE 301
12-21-01 SEP 01/94
FOKKER 70/100
A member of
DCUtSChe AGTOSD9C6

SET - MINI NIPPLES GREASING
F100-TEM-0088 a
PAGE 302
H O OH AH
\tL-<L I-U I SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : 28-0-2771H Cont'd

SET - MINI NIPPLES GREASING
Usage To grease the flight control bearings, equipped with mini nipples.
Tool
consists of A. Nipple-straight 28-0-2771-01 2 off
B. Nipple-30 degrees 28-0-2771-02 2 off
C. Nipple-90 degrees 28-0-2771-03 2 off
D. Tube-extension 28-0-2771-10 1 off
- 150 degrees
E. Tube-extension 28-0-2771-11 1 off
F. Tube-extension 28-0-2771-07 1 off
G. Connection 28-0-2771-14 1 off
H. Grip-pistol 28-0-2771-16 1 off
J. Case 28-0-2771-18 1 off
Effectivity : All.
Weight and
packaging 6.5 kg (14,3 Ib), 1 case.
Quantity 1 off.
PAGE 303
12-21-01 SEP 01/94
FOKKER 70/100
Amemberof
Deutscne Aerospace

CAN - FLAP MAIN DRIVE GEARBOX OIL
F L E X . HOSE L E N G T H 2 5 0 m m
( 9,84 in )
| Usage : To fill the flap main drive gearbox with hydraulic fluid,
Effectivity : All.
Quantity : 1 off.
Supplementary data:
Oil cans delivered after Oct. 1994 may differ slightly from previous models.
KMiat u
PAGE *304
o-i rn
~C. l-Ul MAR 01/95
*
FOKKER 70/100
Amemberof
Deutsche Aerospace

CAN - FLAP GEARBOX OIL
FLEX. HOSE LENGTH 250mm

{ 9 , 8 4 in)
| Usage : To fill the flap gearbox with engine oil
Effectivity : All.
Quantity : 1 off.
Supplementary data:
Oil cans delivered after Oct. 1994 may differ slightly from previous models.
PAGE 305
12-21-01 MAR 01/95
FOKKER 70/100
A member of
Deulscne Aerospace
Part number : W01

ADAPTER - GREASING
STA1700
STA 5280
STA 8200
ADAPTER-
GREASING
VIEW A
LUBRICATION
NIPPLES
ADAPTER-
GREASING
F100-TEM-0094a
PAGE 306
rnI
-U SEP 01/94
FOKKER 70/100
Arriefnber of
DeutSChe ABTOS03C6
Part number : W01 Cont'd

ADAPTER - GREASING
Usage : To grease the nipples of the main landing gear pintle pins.
To grease the flap actuator nuts and the floating trunnions.
Effectivity : All.
Quantity : 1 off.
Vendor code : #W077.
nH PAGE 307/308
~U I SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
PAGE 301
12-93-00 SEP 01/94
FOKKER 70/100
Arnembcrof
OCUtSCfIB ABTOS0806
Part number 8483

DOCK - TAIL
i F100-TEM-0093
PAGE 302
1 2-93-00 SE? 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number 8483 Cont'd

DOCK - TAIL
Usage To facilitate maintenance on the tail and the stub wing,
Effectivity All.
Quantity 1 off.
Vendor code H3188.
NOTE: Optional tool

P/N 88149-02C ; vendor code : H6284.
PAGE 303/304
12-93-00 SEP 01/94
FOKKER70/100

E E
LEP 1/2 NOV 01/09 R

20-00-00 1 SEP 01/94
20-00-00 2 SEP 01/94
20-00-00 3 SEP 01/94
20-00-00 4 SEP 01/94
20-00-00 5 SEP 01/94
20-00-00 6 SEP 01/94
20-00-00 7 SEP 01/94
20-00-00 8 SEP 01/94
20-00-00 9 SEP 01/94
20-00-00 10 SEP 01/94
20-00-00 11 SEP 01/94
20-00-00 12 SEP 01/94
20-00-00 13 SEP 01/94
20-00-00 14 SEP 01/94
20-00-00 15 SEP 01/94
20-00-00 16 SEP 01/94
20-11-00 801 AUG 01/03
20-11-00 802 SEP 01/06
20-11-00 803 SEP 01/06
20-11-00 804 NOV 01/09 R
20-11-00 805 NOV 01/09 R
20-11-00 806 SEP 01/06
20-90-00 1 MAR 01/95
20-90-00 2 MAR 01/95
20-92-01 201 SEP 01/94
20-92-01 202 SEP 01/94
Page 1/2
LEP CHAPTER 20 NOV 01/09
FOKKER 70/100
TABLE OF CONTENTS
F0N8-0513C FLAG - CAUTION 20-00-00 1

27-1-4287 TOOL BOX - ELECTRICIAN 20-00-00 2
28-0-4240 TOOL BOX - AIRFRAME 20-00-00 5
28-0-4712 TOOL BOX - AIRFRAME SNAP-ONIAN 20-00-00 10
28-0-4713 TOOL BOX - ELECTRICIAN SNAP-ON 20-00-00 14
W98714A KIT - TUBE REPAIR 20-11-00 802
W98714B KIT - TUBE REPAIR 20-11-00 804
JCAIR429E TESTER - ARINC 429 DATA BUS 20-90-00 1
DMC 839 SET - SERVICE TOOLS, ELECTRICAL CONNCTORS 20-90-00 2
581-901 PULLER - LAMP CAPSULE 20-92-01 201
20 CONTENTS Page 1/2

SEP 01/06
FOKKER 70/100
Deutsche Aerospace
Part number : FON8-0513C

FLAG - CAUTION
500mm
75mm (19,68in)
(2,95 in)
F100-TEM-0060
Usage To clearly indicate those tools which affect the flight-safety of

the aircraft when kept installed after use.
Parts list 1. Flag 1 off
2. Hook 1 off
Effectivity All.
Finish The flag is colored red.

Quanti ty 1 off per tool as necessary.
PAGE 1
20-00-00 SEP 01/94
FOKKER 70/100
A member of
Deuocne Aerospace

TOOL BOX - ELECTRICIAN
Usage : For maintenance of the aircraft electrical system.
NOTE: The tool box can be ordered under:
p/n 27-1-4287-110 (with heatgun 115V)
or p/n 27-1-4287-111 (with heatgun 220V)
Tool
consists of A. Tool box, dimensions D8404 446/08 1 off
530x200x200mm
(20,9 x 7,9 x 7,9 in)
B. Contents
Parts list : (Part B)
1. Padlock D9764 35/35 1 off
2. Pliers Connector D3059 2650 1 off
3. Pliers Combination D8404 10573/180CI 1 off
4. Pliers Side Cutting D3059 2663B 1 off
5. Pliers Side Cutting D3059 2676B 1 off
6. Pliers Side Cutting Miniature D3059 2646M 1 off
7. Pliers Flat Long Jaw D3059 2458KB 1 off
8. Pliers Flat Short Jaw D3059 2694B 1 off
9. Pliers Flat Round Nose D3059 2456A 1 off
10. Pliers Wire Twister ( L=250mm ) D3059 2855F 1 off
11. Screwdriver Flat 200x5 5x0.8 Insulated #B254 145/3-200 1 off
12. Screwdriver Flat 200x6 5x1.0 Insulated #B254 145/4-200 1 off
13. Screwdriver Flat 90x3 5x0.5 Insulated #6254 145/1-90 1 off
14. Screwdriver Flat 30x5.5 Extra Short #B254 135-3 1 off
15. Screwdriver Phillips No.l Insulated #B254 190A/1-130 1 off
16. Screwdriver Phillips No.2 Insulated #B254 190A/2-150/6 1 off
17. Screwdriver Phillips No.2 Extra Short #B254 195-2 1 off
18. Screwdriver Torque Set Crosshead 03705 268P-8 1 off
19. Screwdriver Torque Set Crosshead 03705 268-10 1 off
20. Spanner Pre-set Torque 5/32" K0574 WB808/1146 1 off
22. Screwdriver Flat Offset D8404 10546/1 1 off
23. Screwdriver Phillips Offset No.l And No.2 D8404 10551/1 and 2 1 off
24. Screwdriver Instrument Set D3059 2003F/7 1 off
25. Screwdriver Hexagon Long 7/64" D3059 1997 ZBL 7/64 1 off
28. Nutdriver 5/32" #6254 203/5/32 1 off
29. Nutdriver 3/16" #B254 203/3/16 1 off
30. Nutdriver 7/32" #B254 203/7/32 1 off
31. Nutdriver 1/4" #8254 203/1/4 1 off
32. Spanner Open End/ring 1/4" D8404 14A1/4 1 off
33. Spanner Open End/ring 5/16" 08404 14A/5/16 1 off
34. Spanner Ring - 3/16" X 13/64" 55719 XID1213 1 off
PAGE 2
20-00-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace
Part number : 27-1-4287 Cont'd,

36. Spanner Ratchet Ring l/4"x5/16" Double 55719 R810A 1 off

Hexagon
37. Wrench Set - Hexagon L-shape D8404 10760ACV/11PC 1 off
consists of :
a. Wrench Hexagon Insert 3/64" D8404 10760ACV-3/64 1 off
b. Wrench Hexagon Insert 1/16" D8404 10760ACV-1/16 1 off
c. Wrench Hexagon Insert 5/64" D8404 10760ACV-5/64 1 off
d. Wrench Hexagon Insert 3/32" D8404 10760ACV-3/32 1 off
e. Wrench Hexagon Insert 1/8" D8404 10760ACV-1/8 1 off
f. Wrench Hexagon Insert 5/32" D8404 10760ACV-5/32 1 off
g. Wrench Hexagon Insert 3/16" D8404 10760ACV-3/16 1 off
h. Wrench Hexagon Insert 7/32" D8404 10760ACV-7/32 1 off
j. Wrench Hexagon Insert 1/4" D8404 10760ACV-1/4 1 off
k. Wrench Hexagon Insert 5/16" D8404 10760ACV-5/16 1 off
1. Wrench Hexagon Insert 3/8" D8404 10760ACV-3/8 1 off
38. Wrench Micro Hexagon Insert 0.028" 55719 AW028 1 off
41. Headdriver Hexagon 5/32" D8404 44A/5/32 1 off
42. Spanner Set - Socket 08404 40AD/10/5 1 off
consists of :
a. Spanner Socket - Double Hex - 3/16" D8404 40AD-3/16 1 off
b. Spanner Socket - Double Hex - 7/32" D8404 40AD-7/32 1 off
c. Spanner Socket - Double Hex - 1/4" D8404 40AD-1/4 1 off
d. Spanner Socket - Double Hex - 9/32" D8404 40AD-9/32 1 off
e. Spanner Socket - Double Hex - 5/16" D8404 40AD-5/16 1 off
f. Spanner Socket - Double Hex - 11/32" D8404 40AD-11/32 1 off
g. Spanner Socket - Double Hex - 3/8" D8404 40AD-3/8 1 off
h. Spanner Socket - Double Hex - 7/16" D8404 40AD-7/16 1 off
j. Spanner Socket - Double Hex - 1/2" D8404 40AD-1/2 1 off
k. Spanner Socket - Double Hex - 9/16" D8404 40AD-9/16 1 off
1. Nutdriver D8404 400 1 off
m. Sliding Handle T D8404 404 1 off
n. Extension bar long D8404 405 1 off
p. Joint Universal D8404 407 1 off
q. Handle Ratchet D8404 415 1 off
43. Bar Extension short - 2 - 1/4" Drive D8404 405K 1 off
44. Handle Universal - 1/4" Drive D8404 403 1 off
45. Extension Flexible - 6" - 1/4" Drive D8404 406 1 off
46. Speed brace - 1/4" Drive D3059 6952 1 off
47. Holder Bit - 1/4" Drive For 1/4" Hex Inserts 03705 M-825 1 off
48. Screwdriver Bit Flat 5.5x0.8 03705 445-2 1 off
49. Screwdriver Bit Phillips No.l 03705 440-1 1 off
50. Screwdriver Bit Phillips No.2 03705 440-2 1 off
51. Screwdriver Bit Torque Set Crosshead 03705 212-8 1 off
53. Knife D8404 12320 1 off
54. Snip Tin D3059 2702A 1 off
55. Snip Universal D3059 4918 1 off
56. Tweezer General Purpose D3059 5471F-145 1 off
PAGE 3
20-00-00 SEP 01/94
FOKKER 70/100
A member of
oeutscne Aerospace
Part number : 27-1-4287 Cont'd.

57. Tweezer Offset D3059 5475K 1 off

58. Mirror Telescopic - Inspection D8404 12920 1 off
59. Magnet Flexible Bar With Handgrip 500 Gr D8404 12600-500 1 off
60. Torch Inspection D8791 664 1 off
61. Bulb Inspection Torch D8791 664BI-BULB 1 off
62. Battery Inspection Torch LOCAL PENLITE AA 2 off
63. File Key Set Of D8404 12800 1 off
64. Brush Terminal D3059 2555 1 off
65. Stripper Wire -raychem Wire- 30120 45-1610 1 off
66. Gauge Wire Cutter 10-12-14 -raychem Wire- 30120 45-1611-1 1 off
67. Stipper Wire -kapton Wire- 30120 45-1960 1 off
68. Gauge Wire Cutter 10-12-14 -kapton Wire- 30120 45-1609-1 1 off
69. Saabstripper 06090 AD1535 1 off
70. Heatgun (115V) H5648 6966C 1 off
Heatgun (220V) H5648 6966E 1 off
71. Reflector Shrink Tubing H5648 6956 1 off
75. Tool Tie Rap 06383 GS4H 1 off
76. Nutdriver Extra Thin Walled D3059 6400M5.5 1 off
77. Socket 1/4" Drive 10 D8404 40L-10 1 off
78. Socket 1/4" Drive 13 D8404 40L-13 1 off
Effectivity All.
Weight and
packaging 25 kg (55 Ib), 1 case.
Quantity 1 off.
PAGE 4
20-00-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

TOOL BOX - AIRFRAME
Usage For maintenance of the airframe,
Tool
consists of A. Toolbox, dimensions D8404 446/08 1 off
530x200x200 mm
(20,9x7,9x7,9 in)
B. Contents
1. Spanner Open End -.445x.525 = 3/16"xl/4" Bsf K0301 2J4452 2 off
2. Spanner Open End -.600x.710 = 5/16"x3/8" Bsf K0301 2J6071 2 off
3. Spanner Open End -.820x.920 = 7/16"xl/2" Bsf K0301 2J8292 2 off
4. Spanner Open End - 5/32" D8404 12A 1 off
5. Spanner Open End - 3/16" D8404 12A 1 off
6. Spanner Open End - ll/16"xl9/32" D8404 10A 1 off
7. Spanner Open End - 25/32"xl3/16" D8404 10A 1 off
7. Spanner Open End - l-5/16"xl-l/2" D8404 10A 1 off
9. Spanner Crow-foot Ring - 9/16" D8404 440A 1 off
10. Spanner Crow- foot Ring - 5/8" D8404 440A 1 off
11. Spanner Crow-foot Ring - 3/4" ii D8404 440A 1 off
12. Spanner Crow-foot Ring - 11/16 D8404 440A 1 off
13. Spanner Ring - 3/16"xlS/64" 55719 XID1213 1 off
14. Spanner Ring - 7/32" X15/64" 55719 XID1415 1 off
15. Spanner Ring - 5/16" xll/32" 55719 XID2022 1 off
16. Spanner Open/ring - 1/4" D8404 14A 2 off
26. Spanner Open/ring - 1" D8404 14A 1 off
27. Spanner Open/ring - 1-1/8" D8404 14A 1 off
30. Spanner Set - Socket - 1/4" Drive D8404 40A/10/5SG 1 off
consists of :
a. Spanner Socket - Hexagon - 3/16" D8404 40A 1 off
b. Spanner Socket - Hexagon - 7/32" D8404 40A 1 off
c. Spanner Socket - Hexagon - 1/4" D8404 40A 1 off
d. Spanner Socket - Hexagon - 9/32" D8404 40A 1 off
e. Spanner Socket - Hexagon - 5/16" D8404 40A 1 off
f . Spanner Socket -Hexagon - 11/32" D8404 40A 1 off
g. Spanner Socket - Hexagon - 3/8" D8404 40A 1 off
h. Spanner Socket - Hexagon - 7/16" D8404 40A 1 off
j. Spanner Socket - Hexagon - 1/2" D8404 40A 1 off
PAGE 5
20-00-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoacs

TOOL BOX - AIRFRAME
k. Spanner Socket - Hexagon - 9/16" D8404 40A 1 off

1. Ratchet D8404 415SG 1 off
m. Bar drive D8404 404 1 off
n. Handle drive D8404 400 1 off
p. Bar Extension - 6" - 1/4" Drive D8404 405 1 off
q. Joint Universal - 1/4" Drive D8404 407 1 off
31. Spanner Socket - Hexagon - Long- 1/4" -1/4" D8404 40AL 1 off
Drive
32. Spanner Socket - Hexagon - Long- 5/16" -1/4" D8404 40AL 1 off
Drive
33. Bar Drive - 1/4" - With Joint D8404 403 1 off
34. Bar Extension - 2" - 1/4" Drive D8404 405K 1 off
35. Handle Ratchet - 3/8" Drive D8404 435 1 off
36. Adaptor Ratchet - 3/8" Drive D8404 445 1 off
37. Bar Extension - 6" - 3/8" Drive D8404 426K 1 off
38. Bar Extension - 3" - 3/8" Drive D8404 427 1 off
39. Adaptor Drive - 1/4" Inner To 3/8" Outer D8404 409 1 off
40. Adaptor Drive - 3/8" Inner To 1/4" Outer D8404 431 1 off
42. Bar Drive - 3/8" Drive D8404 425 1 off
43. Bar Drive - 3/8" - With Joint D8404 424 1 off
44. Handle Crank - 3/8" Drive D8404 421 1 off
45. Joint Universal - 3/8" Drive D8404 428 1 off
46. Extension Flexible Long - 8" - 3/8" Drive D8404 434 1 off
47. Spanner Socket - Double Hex - 1/4" - 3/8" D8404 45A 1 off
Dri ve
Drive
Drive
Drive
51. Spanner Socket - Double Hex -7/16" - 3/8" D8404 45A 1 off
Drive
Drive
53. Spanner Socket - Double Hex - 9/16"- 3/8" D8404 45A 1 off
Drive
Drive
Drive
56. Spanner Socket - Double Hex - 7/16"- Long D8404 46A 1 off
3/8" Drive
57. Spanner Socket - Double Hex - 3/8"- Long D8404 46A 1 off
3/8" Drive
58. Ratchet - 1/2" Drive D8404 532 1 off
59. Bar Extension Long - 10 " - 1/2" Drive D8404 508 1 off
60. Bar Extension Long - 5" - 1/2" Drive D8404 509 1 off
61. Bar Extension Long - 2" - 1/2" Drive D8404 509K 1 off
PAGE 6
20-00-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

TOOL BOX - AIRFRAME
Drive
63. Spanner Socket - Double Hex- 1"- 1/2" Drive D8404 50A 1 off
Drive
65. Spanner Socket Long -Double Hex - 13/16" D8404 51A 1 off
1/2" Drive
66. Joint Universal - 1/2" Drive D8404 510 1 off
67. Screwdriver Phillips No.l #B254 190/1-80 1 off
68. Screwdri ver Phillips No.2 #B254 190/2-100/6 1 off
69. Screwdriver Phillips No.3 #B254 190/3-150 1 off
70. Screwdri ver Phillips No.l Pozidriv #B254 190/1-80 1 off
71. Screwdri ver Phillips No.2 Pozidriv #B254 190/2-100 1 off
72. Screwdriver Flat 60x3mm #B254 140/0-50 1 off
73. Screwdri ver Flat 75x5mm #B254 110/3 1 off
74. Screwdriver Flat 200x4mm #B254 140/2-200 1 off
75. Screwdriver Phillips Offset No.l And No.2 D8404 10551/1 AND 2 1 off
76. Screwdriver Flat 150x5.5mm D8404 10546/3 1 off
77. Screwdriver Flat 150x8mm D8404 10546/4 1 off
77. Screwdriver Flat Extra Short 25x4mm #B254 135-3 1 off
78. Holder Drive Bit 1/4" D8404 4000 1 off
79. Holder Drive Bit 5/16" D8404 4005 1 off
80. Pliers Side Cutting D8404 10580/165CP 1 off
91. Pliers Combination D8404 10570/185CP 1 off
92. Pliers Fait Nose D8404 10646/175CP 1 off
93. Pliers Flat Nose Long D8404 10640/200CP 1 off
94. Spanner Adjustable 8" K8482 8071C 1 off
95. Pliers Wire Twister ( L=250mm ) D3059 2855F 1 off
96. Fingers Mechanical D8404 12922 1 off
97. Mirror Telescopic - Inspection D8404 12920 1 off
98. Frame Saw - 12" - With Blade D8404 12050 1 off
99. Rule Steel Tape D8404 12400 1 off
100. Gauge Set - Feeler D8404 11097/22 1 off
101. Frame Saw - 6" - With Blade H4603 855 1 off
102. Tool Installation Cable Tie 06383 GS 4H 1 off
103. Set Chisel And Pin-driver D3059 3656/10 1 off
consists of :
a. Chisel Flat 125 mm, 150 mm, 175 mm D3059 3656 3 off
b. Chisel Cape 150 x 6 mm D3059 3649 1 off
c. Punch Pin 125 mm, 150 mm, 165 mm D3059 3646 3 off
d. Drift 120 mm, 150 mm D3059 3644 2 off
e. Punch Center 120 X 4 mm D3059 3643 1 off
104. Puller Split-pin D3059 2632 1 off
105. Punch Light Alloy 150 X 10 mm H0643 1 off
106. Screwdriver Bit for Titanium bolts with 03705 HTS3 1 off
High Speedrecess
107. Screwdriver Bit for Titanium bolts with 03705 HTS4 1 off
High Speedrecess
PAGE 7
10-00-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

TOOL BOX - AIRFRAME

111. Screwdriver Bit Phillips No.2 Pozidriv 03705 480-2PZD 2 off
115. Screwdriver Bit Torque Set Crosshead 03705 170-5/16B 2 off
116. Screwdriver Bit Flat 0.6x4.5mm D8404 1152 2 off
117. Screwdriver Bit Flat Ix6mm D8404 1154 2 off
118. Screwdriver Bit Flat 1.2x8mm D8404 1156 2 off
119. Wrench Set - Hexagon L-shape D8404 10760ACV/11PC 1 off
consists of :
Wrench Hexagon Insert 3/64" D8404 10760ACV-3/64 1 off
120. Hammer 300 Gr , With Fiberglass Shaft D3524 08-5039-300 1 off
121. Hammer Plastic 40 mm D8404 10955/40 1 off
122. File handle 10000106 1 off
123. File handle 10000108 1 off
124. File Flat 8" Fine 12100803 1 off
126. File Flat 10" Coarse 12101001 1 off
127. File Round 4" Coarse 12500401 1 off
128. File Round 4" Fine 12500403 1 off
130. File Half-round 8" Coarse 12300801 1 off
131. File Half-round 8" Fine 12300803 1 off
132. Brush File D8404 12378 1 off
134. Torch Inspection D8791 664 1 off
139. Screwdriver Torque Set Crosshead 03705 268P-1/4 1 off
140. Padlock D9764 35/35 1 off
141. Spanner Socket Double Hexagon - 3/16" D8404 40AD 1 off
l/4"Drive
142. Spanner Socket Double Hexagon - 7/32" D8404 40AD 1 off
l/4"Drive
143. Spanner Socket - Double Hexagon - 9/32" D8404 40AD 1 off
l/4"Drive
PAGE 8
20-00-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

TOOL BOX - AIRFRAME
Effactivity : All.
Weight and
packaging : 25 kg (55 Ib), 1 case.
Quantity : 1 off.
20-00-00
FOKKER 70/100
A member of
Deutsche Aerosoacc

TOOL BOX - AIRFRAME SNAP-ON
Usage For mechanical maintenance tasks.
Tool
consists of A. Roll cab, dimensions 55719 KRA545 1 off
670x460x780 mm
(26,4x18x30,7 in)
B. Contents
1. Spanner Open End 3/16"xl/4" Bsf K0301 2J4452 2 off
2. Spanner Open End 5/i6"x3/8" Bsf K0301 2J6071 2 off
3. Spanner Open End 7/16"xl/2" Bsf K0301 2J8291 2 off
4. Spanner Open End 5/32" 55719 DS1010 1 off
5. Spanner Open End 3/16" 55719 DS1212 1 off
6. Spanner Open End ll/16"x5/8" 55719 V02022 1 off
7. Spanner Open End 3/4"xl3/16" 55719 V02426 1 off
8. Spanner Open End 55719 V04042 1 off
9. Spanner Open End 55719 V04852 1 off
10. Spanner Crow-foot Ring - 9/16" 55719 AN8508-9A 1 off
12. Spanner Crow-foot Ring - 11/16 55719 AN8508-11A 1 off
14. Spanner Ring - 3/16"xl3/64" 55719 XID1213 1 off
15. Spanner Ring - 7/32"xl5/64" 55719 XID1415 1 off
16. Spanner Ring - 5/16"xll/32" 55719 XID2022 1 off
17. Spanner Open End/ring - 1/4" 55719 OEX80 2 off
18. Spanner Open End/ring 5/16" 55719 OEX10 2 off
26. Spanner Open End/ring 1" 55719 OEX32 1 off
27. Spanner Open End/ring 1-1/8" 55719 OEX36 1 off
30. Spanner Set - Socket - 1/4" Drive 55719 110TMY 1 off
consists of :
a. Spanner Socket - Hexagon - 3/16" 55719 1 off
b. Spanner Socket - Hexagon - 7/32" 55719 1 off
c. Spanner Socket - Hexagon - 1/4" 55719 1 off
d. Spanner Socket - Hexagon - 9/32" 55719 1 off
e. Spanner Socket - Hexagon - 5/16" 55719 1 off
f. Spanner Socket - Hexagon - 11/32" 55719 1 off
g. Spanner Socket - Hexagon - 3/8" 55719 1 off
h. Spanner Socket - Hexagon - 7/16" 55719 1 off
20-00-00
FOKKER 70/100
A member of
Deutsche Aerospace

j. Spanner Socket - Hexagon - 1/2" 55719 1 off

k. Spanner Socket - Hexagon - 9/16" 55719 1 off
31. Handle Set - 1/4" Drive 55719 107TMPB 1 off
a. Ratchet 55719 TM70B 1 off
b. Extension Bar 2" 55719 TMX2 1 off
c. Extension Bar 4" 55719 TMX4 1 off
d. Extension Bar 6" 55719 TMX6 1 off
e. Handle Drive 55719 TM4CS 1 off
f. Universal Joint 55719 TMU8 1 off
g. Handle-T Sliding - 1/4" Drive 55719 TMIO 1 off
32. Bar Breaker 55719 TM5 1 off
33. Spanner Socket - Hexagon - Long- 1/4" -1/4" 55719 STM8 1 off
Drive
34. Spanner Socket - Hexagon - Long- 5/16" -1/4" 55719 STM10 1 off
Drive
35. Rachet - 3/8" Drive 55719 F270 1 off
36. Adaptor Ratchet - 3/8" Drive 55719 F67B 1 off
37. Bar Extension Long - 3" - 3/8" Drive 55719 FX3 1 off
38. Bar Extension Long - 6" - 3/8" Drive 55719 FX6 1 off
39. Adaptor Drive - 1/4" Inner To 3/8" Outer 55719 TA3 1 off
40. Adaptor Drive - 3/8" Inner To 1/4" Outer 55719 TM1 1 off
42. Bar Drive - 3/8" Drive 55719 F5L 1 off
43. Bar Drive - 3/8" - With Joint 55719 F10LB 1 off
44. Handle Crank - 3/8" Drive 55719 F4LA 1 off
45. Joint Universal - 3/8" Drive 55719 FU8A 1 off
46. Extension Flexible Long - 8" - 3/8" Drive 55719 FX61A 1 off
47. Spanner Socket Set - 3/8" Drive 55719 F212FY 1 off
consists of :
a. Spanner Socket - Double Hex - 1/4" 55719 F081 1 off
b. Spanner Socket - Double Hex - 5/16" 55719 F101 1 off
c. Spanner Socket - Double Hex - 11/32" 55719 Fill 1 off
d. Spanner Socket Double Hex - 3/8" 55719 F121 1 off
e. Spanner Socket Double Hex -7/16" 55719 F141 1 off
f. Spanner Socket Double Hex - 1/2" 55719 F161 1 off
g. Spanner Socket Double Hex - 9/16"
h. Spanner Socket - Double Hex - 5/8"
55719 F181
F201
1
1
off
off
55719
j. Spanner Socket - Double Hex - 11/16" 55719 F221 1 off
k. Spanner Socket - Double Hex - 3/4" 55719 F241 1 off
1. Spanner Socket - Double Hex - 13/16" 55719 F261 1 off
m. Spanner Socket - Double Hex - 7/8" 55719 F281 1 off
48. Spanner Socket - Double Hex - 3/8"- Long 55719 SF121 1 off
3/8" Drive
49. Spanner Socket - Double Hex - 7/16"- Long 55719 SF141 1 off
3/8" Drive
50. Ratchet - 1/2" Drive 55719 SL715 1 off
51. Bar Extension Long - 2" - 1/2" Drive 55719 SX2 1 off
54. Spanner Socket - Double Hex - 7/8" - 1/2" 55719 SW281 1 off
Drive
PAGE 11
20-00-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

55. Spanner Socket - Double Hex- 1"- 1/2" Drive 55719 SW321 1 off
56. Spanner Socket - Double Hex - 15/16" - 1/2" 55719 SW301 1 off
Drive
57. Spanner Socket Long -Double Hex - 13/16" 55719 S261 1 off
1/2" Drive
58. Joint Universal - 1/2" Drive 55719 S8 1 off
59. Screwdriver Phillips No.l 55719 SSDP61 1 off
60. Screwdriver Phillips No. 2 55719 SSDP82 1 off
61. Screwdriver Phillips No. 3 55719 SSDP63 1 off
62. Screwdriver Phillips No.l Pozidriv 55719 SSDZ31 1 off
63. Screwdriver Phillips No. 2 Pozidriv 55719 SSDZ62 1 off
64. Screwdriver Flat 3"xl/8" 55719 SSD234A 1 off
65. Screwdriver Flat 3"xll/64" 55719 SSD143 1 off
66. Screwdriver Flat 10"xll/64" 55719 SSD1410 1 off
67. Screwdriver Phillips Offset No.l And No. 2 55719 ST012B 1 off
68. Screwdriver Flat Offset 4"xl/4" 55719 20 1 off
69. Screwdriver Flat Offset 4-ll/16"x5/16" 55719 30 1 off
70. Screwdriver Flat Extra Short l-l/2"xl/4" 55719 SSD1 1 off
71. Holder Drive Bit 1/4" 55719 SSDM41A 1 off
72. Pliers Side Cutting 55719 86ACP 1 off
73. Pliers Combination 55719 137ACP 1 off
74. Pliers Fait Nose 55719 61CP 1 off
75. Pliers Flat Nose Long 55719 597ACP 1 off
76. Spanner Adjustable 8" 55719 ADS 1 off
77. Pliers Wire Twister 55719 PR311 1 off
78. Fingers Mechanical 55719 YA837 1 off
79. Mirror Telescopic - Inspection 55719 GA294 1 off
80. Frame Saw - 12" - With Blade 55719 HS18 1 off
81. Frame Saw - 6" - With Blade 55719 GA427 1 off
82. Ruler Steel band 55719 FB325 1 off
83. Gauge Set - Feeler 55719 HS5 1 off
84. Tool Installation Cable Tie 55719 YA317 1 off
85. Set Chisel And Pin-driver 55719 PPC710A 1 off
consists of :
a. Chisel Gauge 55719 1 off
b. Punch Center Length 6" 55719 1 off
c. Punch Pin, Length 4-1/4", 5", 5-1/4" 55719 3 off
d. Punch Starter, Length 5-1/4", 6", 6-1/4" 55719 3 off
e. Chisel Flat, Length 5-1/2", 6", 6-1/2" 55719 3 off
86. Puller Cotter-pin 55719 CP3A 1 off
87. Punch 150 X 10 mm H0643 1 off
88. Screwdriver Bit Phillips No. 2 55719 SDM222Z 2 off
89. Screwdriver Bit Phillips No. 3 55719 SDM223A 2 off
90. Screwdriver Bit Phillips No. 4 55719 FP41B2 2 off
91. Screwdriver Bit Phillips No. 2 Pozidriv 55719 SDM252A 2 off
92. Screwdriver Bit Torque Set Crosshead #6" 55719 BTT6 2 off
95. Screwdriver Bit Torque Set Crosshead #5/16" 03705 170-5/16B 2 off
96. Screwdriver Bit Flat 0,034"xO,185" 55719 SDM314 2 off
PAGE 12
20-00-00 SEP 01/94
FOKKER 70/100
DeutscfteAerosoace

97. Screwdriver Bit Flat 0,038"xO,248" 55719 SDM316 2 off

98. Screwdriver Bit Flat 0,042"xl/4" 55719 SDM317 2 off
99. Wrench Set - Hexagon L-shape 55719 AW1015BHK 1 off
consists of :
a. Wrench Hexagon Insert 3/64" 55719 1 off
b. Wrench Hexagon Insert 1/16" 55719 1 off
c. Wrench Hexagon Insert 5/64" 55719 1 off
d. Wrench Hexagon Insert 3/32" 55719 1 off
e. Wrench Hexagon Insert 1/8" 55719 1 off
f. Wrench Hexagon Insert 5/32" 55719 1 off
g. Wrench Hexagon Insert 3/16" 55719 1 off
h. Wrench Hexagon Insert 7/32" 55719 1 off
j. Wrench Hexagon Insert 1/4" 55719 1 off
k. Wrench Hexagon Insert 5/16" 55719 1 off
1. Wrench Hexagon Insert 3/8" 55719 1 off
100. Hammer 12 OZ, With Fiberglass Shaft 55719 BPN12B 1 off
101. Hammer Plastic 55719 BE 124 1 off
102. File Handle 10000106 1 off
103. File Handle 10000108 1 off
106. File Flat 10" Coarse 12101001 1 off
107. File Round 6" Fine 12500603 1 off
110. File Half-round 8" Fine 12300803 1 off
111. File Half-round 8" Coarse 12300801 1 off
112. Brush File 55719 ACS 1 off
113. Torch Inspection 55719 ECF22 1 off
116. Screwdriver Torque Set Crosshead #6" 03705 268P-6 1 off
119. Screwdriver Torque Set Crosshead #1/4" 03705 268P-1/4 1 off
l/4"Drive
l/4"Drive
l/4"Drive
Effectivity : All.
Weight and
Quanti ty 1 off.
PAGE 13
20-00-00 SEP 01/94
FOKKER 70/100
A member of
OeutscfteAerosoace

TOOL BOX - ELECTRICIAN SNAP-ON
Usage For electrical maintenance tasks
NOTE: The tool box can be ordered under:
p/n 28-0-4713-110 (with heatgun 115V)
or p/n 28-0-4713-111 (with heatgun 220V)
Tool
consists of A. Tool box dimensions 55719 KRW48 1 off
460x260x325mm
(18 x 10 1/8 x 12 3/4 in)
B. Contents
Parts lists : (Part B)
1. Padlock 55719 ML7 1 off
2. Pliers Connector 55719 PWC50 1 off
3. Pliers Combination 55719 137CP 1 off
4. Pliers Side Cutting 55719 E720A 1 off
5. Pliers Miniature Side Cutting 55719 E707 1 off
6. Pliers Flat - Long Jaw 55719 61CP 1 off
7. Pliers Flat - Round Nose 55719 96ACP 1 off
8. Pliers Wire Twisting 55719 PR311 1 off
9. Screwdriver Flat - 6 X 032" 11/64" 55719 SSD146 1 off
10. Screwdriver Flat - 8 X 032" 1/4" 55719 SSD480 1 off
11. Screwdriver Flat - 4 X 018" 1/8" 55719 SSDE44B 1 off
12. Screwdriver Flat - 15 X 1/4" Extra Short 55719 SSD1 1 off
13. Screwdriver Phillips No 1 55719 SSDP61 1 off
14. Screwdriver Phillips No 2 55719 SSDP62 1 off
15. Screwdriver Phillips No 2 Extra Short 55719 SSDP22 1 off
16. Screwdriver Torque-set Cross-head 03705 268P8 1 off
17. Screwdriver Torque-set Cross-head 03705 268-10 1 off
20. Screwdriver Off-set Flat 55719 020 1 off
21. Screwdriver Phillips Off-set 1+2 55719 ST012B 1 off
22. Screwdrivers Set Of - Instrument 55719 CM6551 1 off
23. Driver Hexagon 7/64" 55719 TMA35 1 off
26. Driver Nut 5/32" 55719 ND105 1 off
27. Driver Nut 3/16" 55719 ND106 1 off
28. Driver Nut 7/32" 55719 ND107 1 off
29. Driver Nut 1/4" 55719 ND108 1 off
30. Spanner Open / Ring 1/4" 55719 OEX80 1 off
31. Spanner Open / Ring 5/16" 55719 OEX100 1 off
34. Spanner Ratchet Ring 1/4" X 5/16" Double 55719 R810A 1 off
Hexagon
PAGE 14
20-00-00 SEP 01/94
FOKKER 70/100
A member of
DeutseneAerosoace

35. Wrench Hexagon - Set insert L-shaped 55719 AW1015BHK 1 off

consists of :
a. Wrench Hexagon 0.028" 1 off
b. Wrench Hexagon 0.035" 1 off
c. Wrench Hexagon 0.050" 1 off
d. Wrench Hexagon 3/64" 1 off
e. Wrench Hexagon 1/16" 1 off
f. Wrench Hexagon 5/64" 1 off
g. Wrench Hexagon 3/32" 1 off
h. Wrench Hexagon 1/8" 1 off
j. Wrench Hexagon 5/32" 1 off
k. Wrench Hexagon 3/16" 1 off
1. Wrench Hexagon 7/32" 1 off
m. Wrench Hexagon 1/4" 1 off
n. Wrench Hexagon 5/16" 1 off
p. Wrench Hexagon 3/8" 1 off
36. Spanner Socket - Double Hexagon - Set 55719 110TMDY 1 off
consists of :
a. Spanner Socket - Double Hexagon 3/16" 1 off
b. Spanner Socket - Double Hexagon 7/32" 1 off
c. Spanner Socket - Double Hexagon 1/4" 1 off
d. Spanner Socket - Double Hexagon 9/32" 1 off
e. Spanner Socket - Double Hexagon 5/16" 1 off
f. Spanner Socket - Double Hexagon 11/32" 1 off
g. Spanner Socket - Double Hexagon 3/8" 1 off
h. Spanner Socket - Double Hexagon 7/16" 1 off
j. Spanner Socket - Double Hexagon 1/2" 1 off
k. Spanner Socket - Double Hexagon 9/16" 1 off
37. Handle Drive - Set 55719 107TMPB 1 off
consists of :
a. Driver Nut 55719 TM4CS 1 off
b. Bar Extension 2" 55719 TMX2 1 off
c. Bar Extension 4" 55719 TMX4 1 off
d. Bar Extension 6" 55719 TMX6 1 off
e. Joint Universal 55719 TMU8 1 off
f. Drive Swivel Handle 55719 IMF 1 OF 1 off
g. Handle Ratchet 55719 TM70B 1 off
38. Handle T - Sliding 55719 TM5 1 off
39. Extension Flexible - 1/4" Drive 55719 TM61A 1 off
40. Brace Speed - 1/4" Drive 55719 TMS4D 1 off
41. Holder Bit - For 1/4" Hex Inserts 55719 TMBS8 1 off
42. Bit Screwdriver Flat 0.031" X 3/16" 55719 SDM211 1 off
43. Bit Screwdriver - P h i l l i p s No 1 55719 SDM221 1 off
44. Bit Screwdriver - P h i l l i p s No 2 55719 SDM22AZ 1 off
45. Bit Screwdriver - Torque-set Cross-head 55719 BTT8 1 off
46. Bit Screwdriver - Torque-set Cross-head 55719 BIT 10 1 off
47. Knife 55719 YA864 1 off
48. Snips Universal 55719 CDT1 1 off
49. Tweezers Set 55719 YA455 1 off
50. Mirror Inspection 55719 GA294 1 off
PAGE 15
20-00-00 SEP 01/94
FOKKER 70/100
Deutscfte Aerospace

51. Magnet Flexible 55719 PT40 1 off

52. Torch Inspection 55719 ECF22 1 off
53. Battery Inspection Torch LOCAL 1 off
54. Key Files Set 55719 HBN120 1 off
55. Brush End 55719 AC204 1 off
56. Stripper Wire 30120 45-1610 1 off
57. Gauge Cutter 30120 45-1611-1 1 off
58. Stripper Capton Wire 30120 45-1960 1 off
59. Gauge Cutter - Capton Wire 30120 45-1609-1 1 off
60. Heatgun (115V) H5648 6966C 1 off
Heatgun (220V) H5648 6966E 1 off
65. Tool Tie-wrap 55719 YA317 1 off
66. Driver Nut 5,5mm 55719 NDM55A 1 off
67. Socket Drive 1/4" 10 55719 PN STMM 10 1 off
68. Socket Drive 1/4" 13 55719 PN STMM 13 1 off
Effectivity All.
Weight and
Quanti ty 1 off.
PAGE 16
20-00-00 SEP 01/94
FOKKER70/100
20-11 -00 PAGE 801

AUG 01/03
FOKKER 70/100
Part number : W98714A

KIT - TUBE REPAIR
20-11-00 PAGE 802

SEP 01/06
FOKKER 70/100
Part number : W98714A Cont’d

KIT - TUBE REPAIR
Usage : To make a temporary repair of hydraulic lines.
Parts list : 1. Union MS21902J4 6 off

2. Nut MS21921-4J 6 off
3. Sleeve MS21922-4(C) 6 off
4. Hose AE246-4 1 off
5. Re-usable Fitting AE18926E 6 off
11. Union MS21902J6 6 off
12. Nut MS21921-6J 6 off
15. Re-usable Fitting AE18926G 6 off
22. Nut MS21921-8J 6 off
25. Re-usable Fitting AE18926H 6 off
32. Nut MS21921-10J 6 off
34. Hose AE246-10 1 off
35. Re-usable Fitting AE18926J 6 off
42. Nut MS21921-3J 6 off
46. Reducer MS21916J4-3 2 off
52. Nut MS21921-5J 6 off
Effectivity : For flareless A/C with s/n 11420 & 11432 and up.
Packaging : 1 case.
Quantity : 1 off.
20-11-00 PAGE 803

SEP 01/06
FOKKER70/100
Part number : W98714B

KIT - TUBE REPAIR
23
13
— 36
20-11-00 PAGE 804

NOV 01/09
FOKKER70/100
Part number : W98714B Cont'd

KIT - TUBE REPAIR
Usage : To make a temporary r«
Parts list : 1. Union MS21902J4 6 off

2. Nut MS21921-4J 6 off
3. Sleeve MS21922-4CC) 6 off
12. Nut MS21921-6J 6 off
22. Nut MS21921-8J 6 off
32. Nut MS21921-10J 6 off
34. Hose AE246-10 1 off
42. Nut MS21921-3J 6 off
52. Nut MS21921-5J 6 off
76. Reducer MS24399J3 2 off
86. Reducer MS24399J8 2 off
Effectivity : For flared A/C with s/n 11244 thru 11431 excluded 11420.
Packaging : 1 case.
Quantity : 1 off.
PAGE 805
20-11-00 NOV 01/09
FOKKER 70/100
20-11-00 PAGE 806

SEP 01/06
FOKKER 70/100
Amerrtoerof
Deutsche Aerospace
Part number : JCAIR429E

TESTER - ARINC 429 DATA BUS
63,5 mm
(2,5in)
108 mm
(4,25 in)
165mm
(6,25 m)
F100-TEM-0048
Usage To test and trouble shoot the ARINC 429 data bus.
Effactivity All.
Quantity 1 off.
Vendor code 41364.
PAGE 1
20-90-00 HAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : DMC 839

SET - SERVICE TOOLS, ELECTRICAL CONNECTORS
205mm
(B.lin)
Usage : To crimp, install and remove the contacts in electrical

connectors.
Effectivity : All.
Quantity : 1 off.
Vendor code : 11851.
PAGE 2
20-90-00 HAROU95
FOKKER 70/100
Deutsche Aerospace
Part number : 581-901

PULLER - LAMP CAPSULE
10mm
(0,4in)
102mm
(4,00in)
36mm
F100-TEM-017S
Usage To remove lamp capsule to facilitate bulb removal.

Effactivity All.
Quanti ty 1 off.
Vendor code H6389.
PAGE 201/202
20-92-01 SEP 01/94
FOKKER70/100

E E
LEP 1/2 NOV 01/09 R

CONTENTS 1/2 NOV 01/09 R
21-00-02 101 SEP 01/94
21-00-02 102 SEP 01/94
21-21-01 501 SEP 01/94
21-21-01 502 SEP 01/94
21-21-01 503 SEP 01/94
21-21-01 504 SEP 01/94
21-21-01 505 SEP 01/94
21-21-01 506 SEP 01/94
21-23-03 501 SEP 01/94
21-23-03 502 MAR 01/95
21-31-00 501 SEP 01/94
21-31-00 502 SEP 01/94
21-51-00 401 SEP 01/94
21-51-00 402 SEP 01/94
21-51-03 601 NOV 01/09 N
21-51-03 602 NOV 01/09 N
21-63-02 101 SEP 01/94
21-63-02 102 SEP 01/94
21-90-00 1 SEP 01/94
21-90-00 2 SEP 01/94
Page I/2
FOKKER70/100
TABLE OF CONTENTS
28-0-4038 TEST BOX - INDICATOR, TEMP AND PRESS 21-00-02 101

28-0-4832B TEST SET - PNEUMATIC VALVES 21-21-01 502
28-0-1274K TEST SET - PNEUMATIC VALVES 21-21-01 504
27-1-4253 TEST SET - DIFFERENTIAL PRESSURE 21-23-03 501
AS58038 COUPLING - LP GROUND CONNECTION 21-31-00 501
28-0-2333C TEST SET - CABIN PRESSURE 21-31-00 502
28-0-1933C CLAMP - INSTALLATION 21-51-00 401
D00940B TOOL - MEASURING, AIR CYCLE MACHINE 21-51-03 601
28-0-3997 TEST BOX - TEMP AND PRESS CONDITIONING BOX 21-63-02 101
H0040A UNIT - PRESSURE GAUGE 21-90-00 1
28-0-3415 HOSE - DIFFERENTIAL PRESSURE 21-90-00 2
21 CONTENTS
FOKKER 70/100
A member of
Deutsche Aerospace

TEST BOX - INDICATOR, TEMP AND PRESS
130mm
(5.1 in)
200mm
(7.9 in)
F100-TEM-0326
Usage For repair and overhaul of the temp, and press, indicator, type
EATPI8521 and the test panel indicator, type EAMTI8522.
Tool
consists of : A. Test box
B. Cable assembly
MANUAL, GEM 0140.
Effectivity : All.
Quantity : 1 off.
PAGE 101/102
21-00-02 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
PAGE 501
21-21-01 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace
Part number : 28-0-4832B

TEST SET - PNEUMATIC VALVES
581mm
(22.Bin)
8
F100-TEM-0406
PAGE 502
O-! O-l A-I
^1 I-£ I-U I SEP 01/94
FOKKER 70/100
OeutscfteAerosoace
Part number : 28-0-4832B Cont'd

TEST SET - PNEUMATIC VALVES
Usage To test the pneumatic pressure switches, APU inlet valves and the
components of the bleed air, air conditioning, anti-icing, center
wing tank and the automatic shutoff control system.
To test the center wing tank electrical motors with tool number
28-0-2197.
Tool
consists of A. Test box
B. Coupling assy
r
Coupling assy
Coupling assy
Cable assy
Cable assy
Cable assy
Cable assy
Cable assy
Cable assy
Parts list FOR PARTS AND MAINTENANCE INFORMATION, REFER TO THE GROUND
EQUIPMENT MANUAL, GEM 0167.
Effectivity All.
Quanti ty 1 off.
PAGE 503
21-21-01 SEP 01/94
FOKKER 70/100
Deutscne Aerospace
Part number : 28-0-1274K

TEST SET - PNEUMATIC VALVE
800mm
(31,49in)
F100-TEM-0098
PAGE 504
rM rn
-£.!-() 1 SEP 01/94
FOKKER 70/100
A member of
Deuiiche A
Part number : 28-0-1274K Cont'd

TEST SET - PNEUMATIC VALVE
Usage To test the pneumatic pressure switches, APU inlet valves and the
components of the bleed air, air conditioning, anti-icing, center
wing tank and the automatic shutoff control system.
To test the center wing tank electrical motors with tool number
28-0-2197.
Tool
B. Coupling
~ Coupling
f\Coupling
i•
D.
t— r% I
E. Reducer
F. Valve assy
G. Pipe assy
H. Cable assy
I. Cable assy
J. Cable assy
K. Cable assy
L. Cable assy
M. Cable assy
0. Hose assy
Effectivity All.
Quanti ty 1 off.
PAGE 505/506
21-21-01 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

TEST SET - DIFFERENTIAL PRESSURE
95mm
(3,74 in)
350mm
(13,77m)
F100-TEM-0311
Usage : To check the condition of the avionics cooling filter and the
recirculation filters.
MANUAL, GEM 0093.
Effectivity : All.
Weight and
packaging : 1 plastic case.
Quantity : 1 off.
PAGE 501/502
21 -23-03 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace
| Part number : AS58038

COUPLING - LP GROUND CONNECTION
204mm
{8,5 in
229 mm
(9,9 in)
F100-TEM-0049
Usage To connect ground air conditioning unit to the aircraft. To be

used with ground air conditioning units equipped with Sin hose
according to MS33562.
DOCUMENTATION.
Effactivity All.
Quantity 1 off.
Vendor code F7161.
Supplementary data:
Replaces coupling part number ACE277-004
PAGE 501
21-31-00 MAR 01/95
FOKKER 70/100
Deutscne Aerospace

TEST SET - CABIN PRESSURE
90mm
(3,54in) 160mm
(6,29in)
240mm
(9.4tn)
F100-TEM-0099
Usage : To test the cabin pressure regulating system.

Tool
consists of : A. Test box assy
B. Hose assy
Effectivity : All.
Quantity : 1 off.
PAGE 502
QII-UU
-O nn SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

CLAMP - INSTALLATION
F100-TEM-0008
Usage To remove or install peri-seal housing.

Parts list 1. Band 28-0-1933-02 1 off
2. Felt 28-0-1933-05 1 off
Effectivi ty All.
Quantity 1 off.
PAGE 401/402
21-51-00 SEP 01/94
FOKKER 70/100
Part number : D00940B

TOOL - MEASURING, AIR CYCLE MACHINE
23
Usage To measure the axle deviation of air cycle machine.

Parts list 1. Shaft 1 off
2. Nut, notched 2 off
3. Bolt, Internal Wrenching 2 off
4. Holder 1 off
Effectivity All.
Quantity 1 off.
PAGE 601/602
21-51-03 NOV 01/09
FOKKER 70/100
Deutsche Aerospace

TEST BOX - TEMP AND PRESS CONDITIONING BOX
F100-TEM-0325
Usage : For repair and overhaul of the temp and press conditioning box,
type EATPC8520.
Tool
B. Extender assembly
C. Cable assembly
MANUAL, GEM 0141.
Effectivity : All.
Quantity : 1 off.
PAGE 101/102
21-63-02 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : H0040A

UNIT - PRESSURE GAUGE
Usage : To measure cabin pressure during cabin presssurization test.

Tool
consists of : A. Pressure gauge unit
B. Piezo pressure sensor
C. Screwdriver
D. Plug calibration
E. Case
MANUAL, GEM 0056.
Effectivity : All.
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 1
21 -90-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

HOSE - DIFFERENTIAL PRESSURE
1000mm
(39.37in)
2,3
F100-TEM-0178
Usage For use with digital pressure gauge unit, H0040 during cabin
pressurazation test.
Parts list 1. Hose 2TESQ5-19-1000 1 off
2. Identification plate 28-0-3415-02 1 off
3. Clamp FON2-7120 1 off
Effectivity All.
Quantity 1 off.
Vendor code H3527.
PAGE 2
21-90-00 SEP 01/94
FOKKER 70/100

E E
LEP 1/2 SEP 01/06 R

CONTENTS 1/2 SEP 01/06 R
22-11-03 401 SEP 01/94
22-11-03 402 SEP 01/94
22-11-03 403 SEP 01/06 R
22-11-03 404 SEP 01/06 R
22-11-03 501 SEP 01/94
22-11-03 502 SEP 01/94
22-11-04 501 SEP 01/94
22-11-04 502 SEP 01/94
22-11-04 503 SEP 01/94
22-11-04 504 SEP 01/94
22-11-05 501 SEP 01/94
22-11-05 502 SEP 01/94
22-41-00 101 SEP 01/06 R
22-41-00 102 SEP 01/06 R
22-90-00 301 SEP 01/94
22-90-00 302 SEP 01/94
Page 1/2
FOKKER 70/100
TABLE OF CONTENTS
981-6301-002 TEST SET – FLIGHT DATA RECORDER 22-11-03 401

17TE165 TEST SET – FLIGHT DATA RECORDER 22-11-03 402
17TES0010 TEST SET – FLIGHT DATA RECORDER, SOLID 22-11-03 403
STATE
17TES0043 TEST SET – FLIGHT DATA RECORDER, SOLID 22-11-03 404
STATE
822-0030-001 ADAPTER – SLIP CLUTCH TEST, AFCAS SERVO 22-11-03 501
MOUNT
103-003 TEST SET – RVDT ADJUSTMENT 110 VAC 22-11-04 501
103-004 TEST SET – RVDT ADJUSTMENT 220 VAC 22-11-04 502
28-0-4070B SET – ADAPTER CABLE 22-11-04 503
28-0-4893 ADAPTER – TORQUE, SERVO MOUNT SLIP CLUTCH 22-11-05 501
28-0-3968 ADAPTER – ATTACHMENT TOOL 22-41-00 101
28-0-1999 SET – PUSH PULL GAUGE 22-41-00 102
MP429F PRINTER – MAINT CONTROL COMPUTER 22-90-00 301
22 CONTENTS
Page 1/2
SEP 01/06
FOKKER 70/100
Deutsche Aerosoace
Part number : 981-6301-002

TEST SET - FLIGHT DATA RECORDER
233,1mm
( 9,18m)
B
A 233,1mm
(9,18 in)
410,9mm
{16,18in)
F100-TEM-01U
Usage : To test the Sunstrand digital flight-data recorder.

Tool
consists of : A. Test set
B. Cable assembly
C. Cable assembly
DOCUMENTATION.
Effectivity : All.
Weight and
packaging : 9.07 kg (20,0 Ib), 1 case.
Quantity : 1 off.
PAGE 401
no
-UO SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
Part number : 17TE165

B
165mm
(6.49in)
460mm
n8.11in)
F100-TEM-0115
Usage : To check correct functioning of the Fairchild flight-data recorder

system.
Tool
B. Cable assy
C. Cable assy
DOCUMENTATION.
Effectivity All.
Quantity 1 off.
Weight and
packaging 8.3 kg (10,3 Ib), 1 case.
Vendor code : 06141
PAGE 402
22-11-03 SEP 01/94
FOKKER 70/100
Part number : 17TES0010

TEST SET – FLIGHT DATA RECORDER, SOLID STATE
Usage : To check correct functioning of the Loral Solid State Flight

Data Recorder system.
Tool
Consists of : A. Laptop Computer
B. AC Adapter
C. Interface Cable
D. Battery Pack
E. Carrying Case
Parts list : FOR PARTS AND MAINTENANCE INFORMATION, REFER TO THE VENDOR
DOCUMENTATION.
Effectivity : All aircraft equipped with a Loral Solid-State Flight Data

Recorder.
Quantity : 1 off.
Weight and
packaging : T.B.D.
Vendor code : 06141
22-11-03
PAGE 403
SEP 01/06
FOKKER 70/100
Part number : 17TES0043

TEST SET – FLIGHT DATA RECORDER, SOLID STATE
Usage : To check correct functioning of the Solid State Flight Data

Recorder system.
Tool
Consists of : A. Portable Interface
B. Audio Readout Cable
C. Auxiliary Readout Cable
D. Auxiliary Power Cable
E. PC Card Disk
DOCUMENTATION.
Effectivity : All aircraft equipped with a Solid-State Flight Data Recorder

of the FA2100 Product Family.
Quantity : 1 off.
Weight : 0,91 kg (2 lb).
Vendor code : 06141
22-11-03
PAGE 404
SEP 01/06
FOKKER 70/100
Amemberof
DeutscneAerosoace
Part number : 822-0030-001

ADAPTER - SLIP CLUTCH TEST, AFCAS SERVO MOUNT
Usage To test the slip clutch setting of the servo mounts.

NOTE; For testing of the rudder and elevator servo mounts, use
this tool in conjunction with adapter-torque p/n 28-0-4893.
Effectivity All.
Finish A caution flag must be attached to this tool (Refer to
chapter 20).
Quanti ty 1 off.
Vendor code 4V792.
PAGE 501/502
22-11 -03 SEP 01/94
FOKKER 70/100
DeutscneAerosoace

TEST SET - RVDT ADJUSTMENT 110 VAC
30.5mm
C12,0in)
F100-TEM-0095
Usage : To adjust and test the RVDTs. (For use with adapter cable set
p/n 28-0-4070).
Tool
consists of : A. Instrument assy
B. Cable-extension
DOCUMENTATION.
Effectivity : All.
Weight and
packaging : 4.1 kg (9 Ib), 1 case.
Quantity : 1 off.
Vendor code : #E114.
PAGE 501
-M f\A
- I 1-U4 SEP 01/94
FOKKER 70/100
Deutsctie Aerosoace

TEST SET - RVDT ADJUSTMENT 220 VAC
30.5mm
(12.0in)
F100-TEM-0096
Usage To adjust and test the RVDTs. (For use with adapter cable set
p/n 28-0-4070).
Tool
consists of : A. Instrument assy
B. Cable-extension
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
Weight and
packaging 4.1 kg (9 Ib), 1 case.
Vendor code : #E114.
PAGE 502
^ ^ n/i
~ I I-U4 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

SET - ADAPTER CABLE
80mm
(3,1 in)
300mm 350mm
(11,8m) (13,8m)
F100-TEM-0174a
Usage To connect the RVDT test set to several RVDTs. (For use with test
set 101-003 and test set 101-004).
Tool
consists of A. Cable assy 28-0-4070-10 1 off
B. Cable assy 28-0-4070-20 1 off
C. Cable assy 28-0-4070-30 1 off
D. Case 28-0-4070-01 1 off
Effectivity : All.
Weight and
packaging : 1 case.
Quanti ty : 1 off.
PAGE 503/504
22-11-04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

ADAPTER - TORQUE, SERVO MOUNT SLIP CLUTCH
25mm
(0,98m)
Usage To connect adapter-slip clutch test, AFCAS servo mount p/n

822-0030-001, to the torque wrench. Only used for testing of the
rudder and elevator servo mounts.
Effectivity All.
Quantity 1 off.
PAGE 501/502
22-11-05 SEP 01/94
FOKKER 70/100

ADAPTER – ATTACHMENT TOOL
Usage : To do a functional test of the overpowering rods.
Effectivity : All.
Quantity : 1 off.
22-41-00
PAGE 101
SEP 01/06
FOKKER 70/100

SET – PUSH PULL GAUGE
Usage : To do a functional test of the overpowering (dynamic) rods.
Tool
Consists of : A. Push Pull Gauge DPP-50 Model LG-050
B. Push Pull Gauge DPPH-100 Model DG-200
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
Weight : 2,80 kg (6,2 lb).
Vendor code : for Tool A and for Tool B, 06141.
22-41-00
PAGE 102
SEP 01/06
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : MP429F

PRINTER - MAINT CONTROL COMPUTER
165 mm
(6.5 in)
100-TEM-22Q01
Usage : To provide a hardcopy record of avionics test results and faults

of the AFCAS system.
Tool
consists of : A. Power cable
B. Remote data cable
C. Paper roll
D. Case
DOCUMENTATION
Effectivity : All.
Weight and
packaging 11 kg (23,81b), 1 case.
Quantity 1 off.
Vendor code : 3T661.
PAGE 301/302
22-90-00 SEP 01/94
FOKKER70/100

E E
LEP 1/2 AUG 01/03 R

23-31-00 501 AUG 01/03 R
23-31-00 502 AUG 01/03 N
Page 1/2
FOKKER70/100
TABLE OF CONTENTS
ES365 TEST BOX - NOISE GENERATOR 23-31-00 501

28-0-4214 TOOL BOX - NOISE GENERATOR 23-31-00 502
23 CONTENTS
FOKKER70/100
Part number : ES365

TEST BOX - NOIS GENERATOR
Usage To adjust the audiolevel of the PA-amplifier with the external

gain and sense potentiometer.
Tool consist of:
A. Test box
B. Adaptor cable
C. Case
Weight and
packaging : 1 case
Eff activity : All.
Quantity : 1 off.
Vendor code : 3AC69
PAGE 501
23-31 -00 AUG 01/03
FOKKER70/100

TEST BOX - NOISE GENERATOR
121mm
(4,8in)
B
Usage : To adjust the audiolevel of the PA-amplifier with the external
gain and sense potentiometer.
Tool consist of:
A. Test box 28-0-4214-20 1 off
B. Adaptor cable 28-0-4214-25 1 off
C. Adaptor cable 28-0-4214-35 1 off
D. Case 28-0-4214-45 1 off
NOTE: B is only applicable for Aircraft Serial no. 11244 up to
and including 11267.
Effactivity : All .
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 502
23-31 -00 AUG 01/03
FOKKER 70/100

E E
LEP 1/2 MAY 01/11 R

CONTENTS 1/2 MAY 01/11 R
24-11-01 401 SEP 01/94
24-11-01 402 SEP 01/94
24-11-01 403 SEP 01/94
24-11-01 404 SEP 01/94
24-11-01 405 MAY 01/11 N
24-11-01 406 MAY 01/11 N
24-90-00 1 SEP 01/94
24-90-00 2 SEP 01/94
24-90-01 101 SEP 01/94
24-90-01 102 SEP 01/94
Page 1/2
LEP CHAPTER 24 MAY 01/11
FOKKER 70/100
TABLE OF CONTENTS
28-0-4891 ADAPTER – TORQUE, IDG OIL LINE 24-11-01 402

28-0-6090 LIFTING EQUIPMENT – INTEGRATED DRIVE 24-11-01 405
GENERATOR
T470 TESTER – PHASE ROTATION 24-90-00 1
28-0-2680G TEST SET – CIRCUIT BREAKERS 24-90-00 2
28-0-3995 TEST BOX – ELECTRICAL POWER INDICATOR 24-90-01 101
Page 1/2
24 CONTENTS MAY 01/11
FOKKER 70/100
A member of
Oeutscne Aerosoace
PAGE 401
24-11-01 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

ADAPTER - TORQUE, IDG OIL LINE
ZONE
UNDERSIDE
VIEW ON ENGINE
7,9 mm
(031 in)
F100-TEM-0381
PAGE 402
n rn
- I I-Ul SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

ADAPTER - TORQUE, IDG OIL LINE
Usage : To apply a torque load to the IDG oil - line fittings on the
Rolls-Royce Tay 620-15/650-15 engine.
Effectivity : All.
Quantity : 1 off.
PAGE 403/404
SEP 01/94
FOKKER 70/100
Part number: 28-0-6090

LIFTING EQUIPMENT – INTEGRATED DRIVE GENERATOR
Usage : To support the Integrated Drive Generator (IDG) during the Removal/Installation.
Effectivity : All.
Quantity : 1 off.
PAGE 405/406
24-11-01 MAY 01/11
FOKKER 70/100
A member of
DeutscneAerosoace
Part number : T470

TESTER - PHASE ROTATION
508mm 381mm
(2,0in) (1,5 in)
F100-TEM-0051 b
Usage : To verify that phases A,B and C of the three phase circuits are in
the correct sequence.
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
24-90-00
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : 28-0-2680G

TEST SET - CIRCUIT BREAKERS
570mm ___
* (22,44m)
f
335mm
i
(13,18m)
t
300mm
(11,81m) -tt •e-
F100-TEM-0050
Usage : To test circuit breakers.

Tool
B. Cable assembly
C. Cable assembly
D. Cable assembly
Effectivity : All.
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 2
24-90-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

TEST BOX - ELECTRICAL POWER INDICATOR
175,3mm
(6.9 in)
279,4mm 177,8mm
(11 in) (7 in)
F100-TEM-0327
Usage : For repair and overhaul of the electrical power indicator, type
EAEP18502.
Tool
B. Cable assembly
MANUAL, GEM 0142.
Effectivity : All.
Quantity : 1 off.
PAGE 101/102
24-90-01 SEP 01/94
FOKKER70/100

E E
LEP 1/2 NOV 01/09 R

25-24-00 401 SEP 01/94
25-24-00 402 SEP 01/94
25-57-00 301 SEP 01/94
25-57-00 302 SEP 01/94
25-57-00 801 NOV 01/09 N
25-57-00 802 NOV 01/09 N
Page 1/2
FOKKER70/100
TABLE OF CONTENTS
88-01T SPANNER - CEILING PANEL RECEPTACLE 25-24-00 401

28-0-4637 PIN - SAFETY, MOVING BELT LOADING SYSTEM 25-57-00 301
W28754-11-2596 TOOL - PRE-TENSION, MOVING BELT LOADING 25-57-00 801
SYSTEM
25 CONTENTS
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : 88-01T

SPANNER - CEILING PANEL RECEPTACLE
75mm
(Bin)
115mm
(4,53in)
TJ
Usage : To install or remove the ceiling panel receptacle.
DOCUMENTATION.
Effectivity : All.
Quantity 1 off.
PAGE 401/402
25-24-00 SEP 01/94
FOKKER 70/100
A member of

PIN - SAFETY, MOVING BELT LOADING SYSTEM
83mm
Bin)
F100-TEM-0408
Usage : To lock the operating switch of the moving belt loading system.
Effectivity : Aircraft with moving belt loading system only.
Finish : A caution flag must be installed to this tool (ref
chapter 20).
Quanti ty : 1 off.
PAGE 301/302
25-57-00 SEP 01/94
FOKKER70/100
Part number : W28754-11-2596

TOOL - PRE-TENSION, MOVING BELT LOADING SYSTEM.
Usage To adjust/measure the pre-tension of the bulkhead cables of the

Moving Belt Loading System
Parts list 1. Adapter W28754-11-2596 1 off
Effectivity Aircraft with Moving Belt Loading System only.
Quantity : 1 off.
PAGE 801/802
25-57-00 NOV 01/09
FOKKER 70/100

E E
LEP 1/2 SEP 01/04 R

26-12-02 401 SEP 01/94
26-12-02 402 SEP 01/94
26-13-00 501 SEP 01/94
26-13-00 502 SEP 01/04 R
26-21-00 501 SEP 01/94
26-21-00 502 SEP 01/94
LEP CHAPTER 26
Page 1/2
SEP 01/04
FOKKER 70/100
Deutsche Aerosoace
TABLE OF CONTENTS

27-1-3568 ADAPTER - TORQUE 26-12-02 401
27-1-3754 TEST SET - SMOKE DETECTOR 26-13-00 501
0560-0490 TEST SET - SMOKE DETECTOR EJECTOR 26-13-00 502
27-1-3695 MAGNET - TEST 26-21-00 501
Page 1/2
26 CONTENTS SEP 01/94
FOKKER 70/100
Deutscne Aerospace

ADAPTER - TORQUE
.30mm
(1,18m)
' (2.36 inr
4mm F100-TEH-0329
(0.15W
Usage : To torque the fire wire connections.

Effectivity : All.
Quantity : 1 off.
PAGE 401/402
26-12-02 SEP 01/94
FOKKER 70/100

TEST SET – SMOKE DETECTOR
Usage : To test the sensitivity of the smoke detector.
Tool
B. Cable assembly
Parts list : FOR PARTS AND MAINTENANCE INFORMATION, REFER TO GROUND

Effectivity : All.
Quantity : 1 off.
26-13-00
PAGE 501
SEP 01/94
FOKKER 70/100

TEST SET – SMOKE DETECTOR EJECTOR
Usage : To measure the flow in the smoke detector ejector system.
Tool
B. Probe
C. Case

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
26-13-00
PAGE 502
SEP 01/04
FOKKER 70/100
Amcffiber of
Deutsche Aerospace

MAGNET - TEST
170mm
(6,69 in)
100mm
{3,93in}
MOO-TEM-0330
Usage To check the operation of the reed switch in the TCPS in the fire
extinguisher bottles.
Tool
consists of : A. Magnet assy 27-1-3695-01 1 off
B. Magnet assy 27-1-3695-05 1 off
C. Holder assy 27-1-3695-15 1 off
D. Box 27-1-3695-07 1 off
Effectivity : All.
Weight and
packaging 1 box.
Quanti ty 1 off.
PAGE 501/502
26-21-00 SEP 01/94
FOKKER70/100

E E
LEP 1 NOV 01/09 R 27-32-01 402 AUG 01/99

LEP 2 NOV 01/09 R 27-35-00 501 SEP 01/94
CONTENTS 1 AUG 01/03 27-35-00 502 SEP 01/94
CONTENTS 2 AUG 01/01 27-35-00 503 SEP 01/94
27-10-00 401 SEP 01/94 27-35-00 504 SEP 01/94
27-10-00 402 SEP 01/94 27-35-00 505 SEP 01/94
27-10-00 403 SEP 01/94 27-35-00 506 SEP 01/94
27-10-00 404 SEP 01/94 27-35-01 101 MAR 01/95
27-10-00 405 SEP 01/94 27-35-01 102 MAR 01/95
27-10-00 406 SEP 01/94 27-40-00 401 SEP 01/94
27-11-00 201 SEP 01/94 27-40-00 402 SEP 01/94
27-11-00 202 SEP 01/94 27-40-00 403 SEP 01/94
27-11-01 401 SEP 01/94 27-40-00 404 SEP 01/94
27-11-01 402 SEP 01/94 27-41-01 401 SEP 01/94
27-11-01 403 SEP 01/94 27-41-01 402 SEP 01/94
27-11-01 404 SEP 01/94 27-41-01 403 SEP 01/94
27-11-06 501 SEP 01/94 27-41-01 404 SEP 01/94
27-11-06 502 SEP 01/94 27-41-04 401 NOV 01/09 R
27-11-06 503 SEP 01/94 27-41-04 402 NOV 01/09 R
27-11-06 504 SEP 01/94 27-42-01 401 SEP 01/94
27-11-10 301 AUG 01/03 27-42-01 402 SEP 01/94
27-11-10 302 AUG 01/03 27-42-01 403 SEP 01/94
27-20-00 401 SEP 01/94 27-42-01 404 SEP 01/94
27-20-00 402 SEP 01/94 27-42-01 405 SEP 01/94
27-20-00 403 SEP 01/94 27-42-01 406 SEP 01/94
27-20-00 404 SEP 01/94 27-42-01 501 AUG 01/99
27-20-00 405 SEP 01/94 27-42-01 502 AUG 01/99
27-20-00 406 SEP 01/94 27-44-01 501 AUG 01/01
27-23-01 101 SEP 01/94 27-44-01 502 AUG 01/01
27-23-01 102 SEP 01/94 27-50-01 401 SEP 01/94
27-23-01 103 SEP 01/94 27-50-01 402 SEP 01/94
27-23-01 104 SEP 01/94 27-50-01 403 SEP 01/94
27-24-02 401 SEP 01/94 27-50-01 404 SEP 01/94
27-24-02 402 SEP 01/94 27-50-01 501 SEP 01/94
27-24-02 403 SEP 01/94 27-50-01 502 SEP 01/94
27-24-02 404 SEP 01/94 27-50-01 503 SEP 01/94
27-30-00 501 SEP 01/94 27-50-01 504 SEP 01/94
27-30-00 502 SEP 01/94 27-50-02 401 SEP 01/94
27-31-00 201 SEP 01/94 27-50-02 402 SEP 01/94
27-31-00 202 SEP 01/94 27-50-03 501 SEP 01/94
27-31-03 401 SEP 01/94 27-50-03 502 SEP 01/94
27-31-03 402 SEP 01/94 27-50-03 503 SEP 01/94
27-32-01 401 AUG 01/99 27-50-03 504 SEP 01/94
Pagel
FOKKER70/100

E E
27-50-03 505 SEP 01/94 27-91-04 402 SEP 01/94

27-50-03 506 SEP 01/94 27-91-04 403 SEP 01/94
27-51-00 501 SEP 01/94 27-91-04 404 SEP 01/94
27-51-00 502 SEP 01/94 27-91-05 401 SEP 01/94
27-51-00 503 SEP 01/94 27-91-05 402 MAR 01/95
27-51-00 504 SEP 01/94 27-91-05 403 SEP 01/94
27-53-00 501 SEP 01/94 27-91-05 404 SEP 01/94
27-53-00 502 SEP 01/94 27-91-06 401 SEP 01/94
27-53-00 503 SEP 01/94 27-91-06 402 SEP 01/94
27-53-00 504 SEP 01/94 27-91-06 403 SEP 01/94
27-53-00 601 SEP 01/94 27-91-06 404 SEP 01/94
27-53-00 602 SEP 01/94 27-91-07 401 SEP 01/94
27-53-04 401 SEP 01/94 27-91-07 402 SEP 01/94
27-53-04 402 SEP 01/94 27-91-07 403 SEP 01/94
27-53-05 601 SEP 01/94 27-91-07 404 SEP 01/94
27-53-05 602 SEP 01/94 27-93-01 501 SEP 01/94
27-53-05 603 SEP 01/94 27-93-01 502 SEP 01/94
27-53-05 604 SEP 01/94 27-93-02 401 SEP 01/94
27-55-02 101 SEP 01/94 27-93-02 402 SEP 01/94
27-55-02 102 SEP 01/94 27-95-02 401 SEP 01/94
27-60-01 401 SEP 01/94 27-95-02 402 SEP 01/94
27-60-01 402 SEP 01/94 27-97-01 601 SEP 01/94
27-60-02 501 SEP 01/94 27-97-01 602 SEP 01/94
27-60-02 502 SEP 01/94 27-97-02 201 SEP 01/94
27-61-02 401 SEP 01/94 27-97-02 202 SEP 01/94
27-61-02 402 SEP 01/94
27-65-00 501 SEP 01/94
27-65-00 502 SEP 01/94
27-66-00 201 SEP 01/94
27-66-00 202 SEP 01/94
27-66-01 401 SEP 01/94
27-66-01 402 SEP 01/94
27-66-02 501 SEP 01/94
27-66-02 502 SEP 01/94
27-71-00 501 SEP 01/94
27-71-00 502 SEP 01/94
27-90-01 201 SEP 01/94
27-90-01 202 SEP 01/94
27-90-02 501 MAR 01/95
27-90-02 502 MAR 01/95
27-90-03 501 MAR 01/95
27-90-03 502 MAR 01/95
27-91-04 401 SEP 01/94
Page 2
FOKKER70/100
TABLE OF CONTENTS
28-0-4077 BOARD - AILERON RIGGING 27-10-00 402

28-0-3948 BOARD - AILERON TAB RIGGING 27-10-00 404
0501750-4 PROP BLOCK - CABLE TENSION REGULATOR 27-11-00 201
AILERON
27-1-4051 BOARD - CONTROL WHEEL RIGGING 27-11-01 402
28-0-3961B SET - RIGGING PIN, AILERON AND TRIM CONTROL 27-11-06 502
SYSTEM
28-0-4106 UNIT - FLUTTER DAMPER FILLING 27-11-10 301
|28-0-4106A UNIT - FLUTTER DAMPER FILLING 27-11-10 302
28-0-1219G BAR - SPEEDBRAKE GROUND LOCK 27-20-00 401
28-0-1331K BOARD - RUDDER RIGGING 27-20-00 402
28-0-1073J SLING - RUDDER HOISTING 27-20-00 404
28-0-4028 TEST BOX - RUDDER LIMITER MONITOR 27-23-01 102
28-0-3963B SET - RIGGING PIN, RUDDER AND TRIM CONTROL 27-24-02 402
SYSTEM
28-0-1980 BOARD - ELEVATOR RIGGING 27-30-00 501
0501750-7 PROP BLOCK - CABLE TENSION REGULATOR 27-31-00 201
ELEVATOR
28-0-2104 FIXATION TOOL - ELEVATORS 27-31-03 401
28-0-2594A TOOL - SERVO VALVE STICKING SIM, ELEVATOR 27-32-01 401
28-0-1390H TOOL - ALIGNMENT, ANGLE OF ATTACK 27-35-00 502
TRANSDUCER
28-0-1390J TOOL - ALIGNMENT, ANGLE OF ATTACK 27-35-00 504
TRANSDUCER
28-0-4057 TEST BOX - STALL PROTECTION COMPUTER 27-35-01 101
28-0-1504D PULLER - HINGE BOLT, HORIZONTAL STABILIZER 27-40-00 401
28-0-1352 PIN - HINGE MOUNTING, HORIZONTAL STABILIZER 27-40-00 402
28-0-2609 TORQUE ADAPTER - HORIZONTAL STAB 27-40-00 403
28-0-4556 FRAME - HOISTING, HORIZONTAL STABILIZER 27-40-00 404
28-0-4130C SET - RIGGING PIN, HORIZONTAL STABILIZER 27-41-01 402
CONTROL SYSTEM
28-0-1827C TOOL - FIXATION. HORIZONTAL STABILIZER 27-41-04 402
28-0-2077B SLING - HOISTING, HORIZONTAL STABILIZER 27-42-01 401
CONTROL UNIT
28-0-1363C FIXTURE - HOISTING, HORIZONTAL STAB. 27-42-01 402
CONTROL UNIT
28-0-5295 SLING - HOISTING, HORIZONTAL STABILIZER 27-42-01 404
AT24742 TOOL - SPLINED SHAFT 27-42-01 501
AT31687 TORQUE TOOL - ELECTRIC MOTOR 27-44-01 501
28-0-1763D ADAPTER - FLAP ATTACHMENT NUT TRQ 27-50-01 401
28-0-4068 SLING - INBOARD FLAP HOISTING 27-50-01 402
28-0-4230 TEST SET - SELECTION AND SYNCHRO ADJ, FLAP 27-50-01 403
DIN1810A45-50 SPANNER - ECCENTRIC BUSH 27-50-01 501
28-0-2055 SET - FLIGHT CONTROLS FEELER 27-50-01 502
28-0-5018 SPANNER - ECCENTRIC BUSH, FLAP DEFLECTION 27-50-01 503
TROLLEY
28-0-4125 SLING - OUTBOARD FLAP HOISTING 27-50-02 401
28-0-4085B PLATE - FLAP AND VANE RIGGING 27-50-03 502
Page 1
27 CONTENTS "9
O AUG 01/03
FOKKER70/100
TABLE OF CONTENTS

28-0-4157 SET - RIGGING PIN, FLAP SHROUD DOORS AND 27-50-03 504
VANES
28-0-3973C SET - RIGGING PINS 27-51-00 502
28-0-3980 TOOL SET - FLAP CARRIAGE ADJUSTMENT 27-53-00 502
28-0-2320 TOOL - CONCENTRICITY CHECKING, FLAP 27-53-01 601
SPINDLES
10981 PLIERS - INSTALLATION, FLAP FLEXIBLE DRIVE 27-53-04 401
SHAFT
10991 PLIERS - INSTALLATION, FLAP FLEXIBLE DRIVE 27-53-04 401
SHAFT
28-0-4080 TOOL - BACKLASH CHECKING, FLAP ACTUATOR 27-53-05 602
BALL NUT
28-0-4027 TEST BOX - FLAP CONTROL DATA UNIT 27-55-02 101
28-0-4533 PIN - SPEEDBRAKE HANDLE SAFETY 27-60-01 401
28-0-4848 GAUGE - SETTING, LIFTDUMPER MECHANICAL 27-60-02 501
DRIVE SYSTEM
28-0-2138 PULLER - ACTUATOR MOUNTING PIN, SPEEDBRAKE 27-61-02 401
28-0-4246 TEST SET - LIFTDUMPER SWITCHES, LH AND RH 27-65-00 501
28-0-1851D GAUGE - SETTING 27-66-00 201
28-0-2867 SPANNER - LIFTDUMPER BEEL CRANK RETAINER 27-66-01 401
NUT
28-0-5011 SET - ADAPTER, LIFT DUMPER MECHANICAL 27-66-02 501
SYSTEM
28-0-3958 SET - RIGGING PIN, FLIGHT CONTROLS LOCK 27-71-00 501
SYSTEM
28-0-2215B PULLER - SUPPORT ASSEMBLY BUSHING, 27-90-01 201
SPEEDBRAKE
28-0-4215A TEST SET - WHEELSPEED SIMULATOR, LIFTDUMPER 27-90-02 501
SYSTEM
28-0-4494 TEST BOX - ENHANCEMENT UNIT, STALL 27-90-03 501
PROTECTION
28-0-4524 SLING - HOISTING, HORIZONTAL STABILIZER 27-91-04 402
28-0-4102 SET - RIGGING PIN. ELEVATOR CONTROL SYSTEM 27-91-05 402
28-0-4531 FIXTURE - ELEVATOR HOISTING 27-91-06 402
28-0-4750 FIXTURE - SPEEDBRAKE CHECK 27-91-07 402
28-0-2367 SPANNER - ECCENTRIC SPINDLE ASSEMBLY 27-93-01 501
28-0-2074 SPANNER - ADJUSTMENT 27-93-02 401
28-0-4058 SET - TORQUE ADAPTER, HORIZONTAL STABILIZER 27-95-02 401
BEARING
28-0-4167 PLUG - STALL WARNING SYSTEM TEST 27-97-01 601
28-0-4643 FIXTURE - SPRING BUNGEE CHECKING, HOR STAB 27-97-02 201
AND AIL SERVO VALVE
Page 2
27 CONTENTS AUG 01/01
FOKKER 70/100
Deutsche Aerosoace
PAGE 401
27-10-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Acrospxe

BOARD - AILERON RIGGING
150 mm
(5,9 in)
550mm
(21,65m)
F100-TEM-0312
PAGE 402
27-10-00
FOKKER 70/100
A member of
Deutsche Aerosoace

BOARD - AILERON RIGGING
Usage To check the aileron deflection at W. STA 10472.

Tool
consists of A. Rigging board 28-0-4077-01 1 off
front assembly
B. Rigging board 28-0-4077-02 1 off
rear assembly
Parts list : Part A
1. Pin 28-0-4077-08 1 off
2. Bar 28-0-4077-03 1 off
3. Quick-release pin MS17990-412 2 off
4. Bolt NAS1303-22 1 off
5. Washer AN960KD10L 6 off
6. Bolt DIN912 M4xlO 4 off
7. Nut MS2104213 1 off
8. Bracket 28-0-4077-05 1 off
9. Plate 28-0-4077-06 1 off
10. Rubber sheet 28-0-4077-10 1 off
11. Cable 28-0-4077-49 2 off
12. Rivet 28-0-4077-31 1 off
Part B
1. Indicator plate 28-0-4077-26 1 off
2. Bar 28-0-4077-04 1 off
3. Indicator plate 28-0-4077-25 1 off
4. Bar 28-0-4077-40 1 off
5. Screw NAS1331C312 2 off
6. Bar 28-0-4077-38 1 off
7. Rubber sheet 28-0-4077-06 1 off
8. Block 28-0-4077-07 1 off
9. Bracket 28-0-4077-05 1 off
10. Bar 28-0-4077-09 1 off
11. Nut MS21042L3 1 off
12. Washer AN960KD10L 6 off
13. Bolt DIN912 M4xlO 4 off
Effectivity : All.
Finish : The frame of the rigging board is colored yellow.
Weight and
packaging : 15 kg (33 Ib), 1 wooden box.
Quanti ty : 1 off.
PAGE 403
27-10-00 SEP 01/94
FOKKER 70/100
Deutscne Aerospace

BOARD - AILERON TAB RIGGING
8.9 F100-TEM-0302a
10
Usage To check the deflection of the aileron tabs, at STA 9907.

Parts list 1. Frame 28-0-3948-01 1 off
2. Sheet-photosens 28-0-3948-05 1 off
3. Sheet-photosens 28-0-3948-06 1 off
4. Sheet 28-0-3948-04 4 off
5. Rivet MS20470A3-5 4 off
6. Bracket 28-0-3948-03 2 off
8. Screw 28-0-3948-20 8 off
9. Nut 28-0-3948-21 8 off
10. Stiffener 28-0-3948-32 1 off
11. Screw 28-0-3948-27 1 off
12. Nut 28-0-3948-25 1 off
13. Strip 28-0-3948-26 1 off
14. Stiffener 28-0-3948-33 1 off
15. Case 28-0-3948-40 1 off
16. Screw 28-0-3948-24 1 off
17. Knob 28-0-3948-30 1 off
19. Bracket 28-0-3948-02 2 off
20. Plate-name 28-0-3948-10 1 off
21. Rivet Steel 2 off
PAGE 404
27-10-00 SEP 01/94
FOKKER 70/100
A member of
oeutscfte Aerospace

BOARD - AILERON TAB RIGGING
Effectivity : All.
Weight and : 7.2 kg (15,86 Ib), 1 case,
packaging
Quantity : 1 off.
rMbt u
4 f\ f\f\ 3/'tUD
PAGE '*405/406
- lU-UU SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

PROP BLOCK - CABLE TENSION REGULATOR, AILERON
F100-TEM-OU1
Usage : To secure tension regulators (p/n 0501147-1) during installation,

shipping and storage.
NOTE; Prop block may be locally made of alluminum, strip
Ixl0x90mm.
Effectivity : All.
Finish : The prop block is colored red.
Quantity : 1 off.
PAGE 201/202
27-11 -00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
PAGE 401
27-11-01 SEP 01/94
FOKKER 70/100
DeutscneAeroswcc

BOARD - CONTROL WHEEL RIGGING
F100-TEM-0182
PAGE 402
rn
-U I SEP 01/94
FOKKER 70/100
A member of
Oeutscne Aerosoace

BOARD - CONTROL WHEEL RIGGING
Usage To measure friction of the control wheel in combination with a

spring balance, and to check the control for mid-position.
Parts list 1. Plate 27-0-4051-65 1 off
2. Sheet-transparent 27-0-4051-64 1 off
plastic
3. Plate 27-0-4051-63 1 off
4. Screw-cs flat headed 27-1-4051-81 3 off
5. Tube 27-0-4051-61 1 off
6. Wire rose 27-0-4051-78 2 off
7. Bolt 27-0-4051-58 1 off
8. Nut 27-0-4051-60 1 off
9. Washer-bevelled 27-1-4051-59 1 off
10. Screw-cs flat headed 27-1-4051-82 3 off
11. Plate-mounting 27-0-4051-57 1 off
12. Bearing-ball 27-1-4051-83 1 off
13. Nut-knurled FON8-1204-M10 2 off
14. Pin-locking 27-1-4051-68 2 off
15. Nut DIN934M52INCED5 3 off
16. Plate 27-1-4051-89 1 off
17. Screw-hex socket 27-1-4051-86 4 off
head
18. Plate 27-1-4051-55 1 off
19. Plate 27-1-4051-56 1 off
20. Plate 27-1-4051-90 2 off
21. Plate 27-1-4051-91 2 off
22. Pin-dowel 27-1-4051-87 • 4 off
23. Plate 27-0-4051-67 1 off
24. Plate 27-1-4051-52 1 off
Effectivity : All.
Weight and
packaging 9.4 kg (20,68 Ib), 1 case (p/n 28-0-4051-94) with name plate
(p/n FON7-1317A).
Quanti ty 1 off.
Vendor code H7009.
PAGE 403/404
27-11-01 SEP 01/94
FOKKER 70/100
DeutscfteAcrosoace
PAGE 501
27-11 -06 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

SET - RIGGING PIN
VIEW U
VIEWX VIEWW VIEW V

480mm
(18.89 in)
F100-TEM-0179a
PAGE 502
SEP 01/94
FOKKER 70/100

SET - RIGGING PIN
Usage To rig the aileron and trim control system.

Tool
consists of A. Pin-rigging 28-0-3961-01 2 off
B. Pin-rigging 28-0-3961-02 2 off
C. Pin-rigging 28-0-3961-03 2 off
D. Pin-rigging 28-0-3961-04 1 off
E. Pin-rigging 28-0-3961-05 2 off
PRE SB 23000-27-4
F. Pin-rigging 28-0-3961-06 1 off
G. Pin-rigging 28-0-3961-07 1 off
H. Pin-rigging 28-0-3961-08 1 off
J. Pin-rigging 28-0-3961-35 1 off
K. Pin-rigging 28-0-3961-42 1 off
POS SB 23000-27-4
L. Pin-rigging 28-0-1322 2 off
M. Case 28-0-3961-24 1 off
Effectivity All.
Finish A caution flag is attached to each rigging pin (refer to
Chapter 20)
Weight and
packaging 1 case.
Quanti ty 1 off.
PAGE 503/504
27-11-06 SEP 01/94
FOKKER70/100

UNIT - FLUTTER DAMPING FILLING
VIEW A
Usage : To fill and bleed the flutter dampers of the aileron and
rudder.
EQUIPMENT MANUAL. GEM 0108..
| Effectivity : Aircraft Serial Number 11244 up to include 11541.
Weight and
packaging 5.5 kg (12.13 Ib).
Quantity 1 off.
PAGE 301
27-11-10 AUG 01/03
FOKKER70/100

UNIT - FLUTTER DAMPING FILLING
VIEW A
Usage : To fill and bleed the flutter dampers of the aileron and
rudder.
EQUIPMENT MANUAL. GEM 0108.
Effectivity : All.
Weight and
packaging 5.5 kg (12.13 Ib).
Quantity 1 off.
PAGE 302
27-11-10 AUG 01/03
FOKKER 70/100
Amwnber of
Deutsche Aerosoace

BAR - SPEEDBRAKE GROUND LOCK
CROSS SECTION A-A

F100-TEM-0038
Usage To prevent closing of the speedbrake doors.

Parts list 1. Tube 28-0-1219-01 1 off
2. Fork end 28-0-1219-05 2 off
3. Bush 28-0-1219-10 2 off
4. Nut 28-0-1219-11 2 off
5. Pin-dowel 28-0-1219-14 2 off
6. Nut 28-0-1219-17 2 off
7. Bolt 28-0-1219-26 2 off
8. Washer 28-0-1219-27 4 off
9. Bolt 28-0-1219-21 1 off
10. Nut 28-0-1219-22 1 off
11. Plate 28-0-1219-23 1 off
Effectivity : All.
Finish : A caution flag must be attached to this tool (Refer to
chapter 20).
Quanti ty : 1 off.
PAGE 401
27-20-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : 28-0-133IK

BOARD - RUDDER RIGGING
5 20 9 8 16 21 19
Usage To check the rudder deflection.

Parts list 1. Angle 28-0-1331-01 1 off
2. Strip 28-0-1331-02 1 off
3. Strip 28-0-1331-03 1 off
4. Plate 28-0-1331-04 1 off
5. Plate 28-0-1331-05 1 off
6. Plate, rudder 28-0-1331-06 4 off
7. Hand nut 28-0-1331-07 2 off
8. Angle 28-0-1331-08 2 off
9. Angle 28-0-1331-09 1 off
10. Angle 28-0-1331-11 1 off
11. Bolt AN4-11A 2 off
12. Bolt 28-0-1331-13 2 off
13. Ring 28-0-1331-18 4 off
14. Screw 28-0-1331-20 16 off
15. Pin 28-0-1331-23 8 off
16. Bolt 28-0-1331-24 4 off
17. Screw 28-0-1331-25 10 off
18. Bolt 28-0-1331-26 4 off
19. Nut 28-0-1331-27 4 off
20. Bush 28-0-1331-28 4 off
21. Bush 28-0-1331-29 4 off
22. Box 28-0-1331-33 1 off
Effectivity : All.
PAGE 402
27-20-00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
Part number : 28-0-1331K Cont'd

BOARD - RUDDER RIGGING

Weight and
packaging : 1 wooden box.
Quantity : 1 off.
PAGE 403
07 on nn
27-20-00 SEP 01/94
FOKKER 70/100
A i IMJliter of
DeutscneAerouxe
Part number : 28-0-1073J

SLING - RUDDER HOISTING
31
F100-TEM-0346
Usage : To hoist the complete rudder during removal and installation. The
sling consists of a RH and A LH assy.
Tool
consists of : A. Sling-LH 28-0-1073-101 1 off
B. Sling-RH 28-0-1073-102 1 off
Parts list : For each sling
1. Bolt DIN601M10x80ZAA 8 off
2. Sheet, rudder 28-0-1073-120 4 off
3. Sheet 28-0-1073-141 4 off
4. Washer DIN125-4-3STAA 8 off
5. Nut DIN934M10ZINCED5 8 off
6. Rivet, steel 28-0-1073-127 8 off
7. Plate name 28-0-1073-125 2 off
8. Washer AN960C616L 2 off
10. Nut 28-0-1073-116 2 off
11. Lanyard 28-0-1073-126 4 off
12. Block, wood 28-0-1073-141 4 off
13. Rail 28-0-1073-150 2 off
14. Rail carrier 28-0-1073-148 4 off
15. Roller-hang 28-0-1073-149 2 off
16. Screw DIN912M8x20ZAA 20 off
17. Nut DIN934M8ZINCED5 20 off
18. Stud 28-0-1073-114 4 off
PAGE 404
27-20-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : 28-0-1073J Cont'd

SLING - RUDDER HOISTING
19. Pulley MS20220-2 2 off

20. Ring-retaining MS16624-1031 2 off
22. Axle 28-0-1073-117 2 off
23. Bracket 28-0-1073-106 2 off
25. Nut DIN934174ZINCED5 4 off
26. Rail carrier 28-0-1073-148 4 off
27. Bar-U 28-0-1073-105 2 off
28. Nut 28-0-1073-115 2 off
29. Screw NASH 00-3-3 2 off
30. Ring-retaining MS16624-1075 2 off
31. Bar 28-0-1073-113 2 off
32. Screw 28-0-1073-121 2 off
33. Ring 28-0-1073-118 2 off
34. Shackle 28-0-1073-145 2 off
35. Bar 28-0-1073-110 2 off
36. Sheet-rubber 28-0-1073-119 2 off
Effectivity All.
Quanti ty 1 off.
PAGE 405/406
27-20-00 SEP 01/94
FOKKER 70/100
Ajrynber of
Oeutscne Aerososce
PAGE 101
27-23-01 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

TEST BOX - MONITOR
440mm
(15,8in)
F100-TEM-0331
PAGE 102
27-23-01 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

TEST BOX - MONITOR
Usage : For testing and repair of the rudder limiter monitor, type
EARLM8504.
Tool
B. Cable assembly
C. Test tray
D. Extender assembly
MANUAL, GEM 0143.
Effectivity : All.
Quantity : 1 off.
PAGE 103/104
27-23-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
PAGE 401
27-24-02 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

SET - RIGGING PIN
VIEWY VIEWX
320mm
C12.59in)
ABC
215mm
(8.46m)
F100-TEM-0101b
PAGE 402
27-24-02
FOKKER 70/100
Deutscne Aerosoace

SET - RIGGING PIN
Usage To rig the rudder and rudder trim controls.

Tool
J. Pin-rigging 28-0-3963-30 1 off
K. Case 28-0-3963-24 1 off
Effectivity All.
Finish A caution flag must be attached to each of the pins (Refer to
chapter 20).
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 403/404
27-24-02 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

BOARD - ELEVATOR RIGGING
F100-TEM-00143
Usage To check elevator deflection.

Parts list 1. Mounting assy 28-0-1980-01 1 off
2. Felt 28-0-1980-07 1 off
3. Screw MS27039-1-11 2 off
4. Washer 28-0-1980-10 2 off
5. Knurled nut 28-0-1980-09 2 off
6. Plate 28-0-1980-06 1 off
7. Case 28-0-1980-15 1 off
Effectivity : All.
Weight and
packaging : 1 case.
Quanti ty : 1 off.
PAGE 501/502
27-30-00 SEP 01/94
FOKKER 70/100

PROP BLOCK - CABLE TENSION REGULATOR, ELEVATOR
FJOO-TEM-0412
Usage To secure tension regulators (p/n 0501148-1) during installation,

shipping and storage.
NOTE; Prop block may be locally made of aluminum strip Ixl8x90mm.
Effectivity : All.
Finish : The prop blocks are colored red.
Quantity : 2 off.
PAGE 201/202
27-31 -00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

FIXATION TOOL - ELEVATORS
51 mm
(2.00in)
178mm
(7,00m)
F100-TEM-0015a
Usage : To support the elevators during the removal of the elevator

tension regulator.
Effectivity : All.
Finish : Colored red.
Quantity : 2 off.
PAGE 401/402
27-31-03 SEP 01/94
FOKKER70/100

TOOL - SERVO VALVE STICKING SIMULATION
40mm
(15,7 in)
F100-TEM-0013
Usage To simulate sticking of the elevator actuator servo valve.

Parts list 1. Block 28-0-2594-01 1 off
2. Pin. threaded 28-0-2594-02 1 off
3. Pin 28-0-2594-03 1 off
4. End piece 28-0-2594-05 1 off
5. Spring 28-0-2594-06 1 off
Effectivity All.
Finish : A caution flag must be attached to this tool (Refer to chapter
20).
Quantity : 1 off.
PAGE 401/402
27-32-01 AUG 01/99
FOKKER 70/100
A member of
Deutsche Aerospace
PAGE 501
27-35-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TOOL - ALIGNMENT
430mm
(16,92in;
27
26
24
•22
23
.12
14,15,16,17,18
27
21
F100-TEM-0102
PAGE 502
27-35-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace
Part number : 28-0-1390H Cont'd

TOOL - ALIGNMENT
Usage To check the alignment of the angle of attack vanes and their
transducers as installed in the aircraft.
Parts list 1. Pin 28-0-1390-08 2 off
2. Screw NAS600-3 2 off
3. Scale 28-0-1390-19 1 off
4. Pin MS16562-29 2 off
6. Strip 28-0-1390-04 1 off
7. Screw FON8-1124M4x30 2 off
8. Washer AN960B8 2 off
9. Scale 28-0-1390-10 1 off
10. Strip 28-0-1390-07 1 off
11. Screw 28-0-1390-34 1 off
13. Slide 28-0-1390-06 1 off
14. Shim 28-0-1390-25 2 off
15. Shim 28-0-1390-26 2 off
16. Shim 28-0-1390-27 2 off
17. Shim 28-0-1390-28 2 off
18. Shim 28-0-1390-29 2 off
19. Screw FON8-1124M4X 16 off
21. Plate 28-0-1390-23 1 off
22. Plate 28-0-1390-01 1 off
23. Plate 28-0-1390-02 1 off
24. Plate 28-0-1390-03 1 off
25. Case 28-0-1390-39 1 off
26. Screw NAS514-P632 4 off
27. Bush 28-0-1390-20 2 off
Effectivity : All marks with 6ULTON vane.
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 503
27-35-00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
Part number : 28-0-1390J

TOOL - ALIGNMENT
300mm
430mm
(16,92m)
90mm
23
(3,54in)
25
24
22
11,12,13,14,15,16
17
9.10
F100-TEM-0102
PAGE 504
27-35-00
FOKKER 70/100
Deutsche Aerosoace
Part number : 28-0-1390J Cont'd

TOOL - ALIGNMENT
Usage To check the alignment of the angle of attack vanes and their
transducers as installed in the aircraft.
2. Pin MS16562-29 2 off
3. Screw NAS602-10P 2 off
4. Strip 28-0-1390-04 1 off
5. Screw FON8-1124M4X30 2 off
6. Washer AN960-B8 2 off
7. Scale 28-0-1390-10 1 off
8. Screw 28-0-1390-34 1 off
10. Washer AN960-B8 1 off
11. Slide 28-0-1390-50 1 off
12. Shim 28-0-1390-25 2 off
13. Shim 28-0-1390-26 2 off
14. Shim 28-0-1390-27 2 off
15. Shim 28-0-1390-28 2 off
16. Shim 28-0-1390-29 2 off
17. Screw DIN84M4x8ZINAA 16 off
19. Plate 28-0-1390-23 1 off
20. Plate 28-0-1390-01 1 off
21. Plate 28-0-1390-02 1 off
22. Plate 28-0-1390-03 1 off
23. Case 28-0-1390-39 1 off
24. Screw NAS514-P632-12P 4 off
25. Bush 28-0-1390-20 2 off
Effectivity : All.
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 505/506
27-35-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TEST BOX - STALL PROTECTION COMPUTER
F100-TEM-0332
Usage : For repair and overhaul of the stall protection computer, type
EASPC8503.
Tool
B. Cable assembly
Part list : FOR PARTS AND MAINTENANCE INFORMATION, REFER TO GROUND EQUIPMENT
MANUAL, GEM 0110.
| Effectivity : Up to including serial number 11540.
Quantity : 1 off.
PAGE 101/102
27-35-01 MAR 01/95
FOKKER 70/100
Deutsche Aerospace

PULLER - HINGE BOLT
310mm
(12,20in)
100mm
(3.93in)
F100-TEM-0016
Usage To remove the hinge bolts of the horizontal stabilizer.

Parts list 1. Body 28-0-1504-01 1 off
2. Disc 28-0-1504-02 1 off
3. Bearing 51103 1 off
4. Rod 28-0-1504-05 1 off
5. Nut 28-0-1504-07 2 off
6. Nut 28-0-1504-11 1 off
Effectivity All.
Quanti ty 1 off.
Vendor code Part 3
code: H7009
PAGE 401
27-40-00 SEP 01/94
FOKKER 70/100
Amefnbcr of
DfiUtSChG ABTOSD3CB

PIN - HINGE MOUNTING
VIEW X
FIOO-TEM-0017a
Usage To align the horizontal stabilizer prior to installation of the

hinge bolts.
2. Pin 28-0-1352-03 1 off
Effect! vity All.
Quantity 1 off.
PAGE 402
27-40-00
FOKKER 70/100
A member of
Deutscfce Aerosoace

TORQUE ADAPTER - HORIZONTAL STABILIZER
40mm
(1.57in)
77mm dia
I3,03in) -
(10
VIEW X F100-TEM-0018a
Usage : To torque horizontal stabilizer attachment bolts.

Effectivity : All.
Quantity : 1 off.
PAGE 403
07 An nn
I1/-4U-UU SEP 01/94
FOKKER 70/100
Deutscfte Aerosoace

FRAME - HOISTING, HORIZONTAL STABILIZER
2614mm
(102,9in)
160mm
(6.3in)
350mm
(53.2in)
F100-TEM-0409
Usage : To remove or install the horizontal stabilizer with or without the

elevators installed when the hoisting height is restricted.
Tool
consists of : A. Beam assembly
B. Link assembly
C. Auxiliary beam assembly
MANUAL, GEM 0169.
Effectivity : All.
Weight and
packaging : 65 kg (143 Ib).
Quantity : 1 off.
PMtit u
PAGE 404
07 AC\ nn
£/-4U-UU SEP 01/94
**
FOKKER 70/100
Dcutscftc Aerospace

SET - RIGGING PIN
F100-TEM-0180b
PAGE 402
rn
-(J I SEP. 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

SET - RIGGING PIN
Usage To rig the horizontal stabilizer control system.

Tool
C. Pin-sticking 28-0-4130-03 1 off *
(PRE SB23100-27-5)
D. Pin-sticking 28-0-4130-04 1 off *
(POST SB23100-27-5)
E. Spring tensioner 28-0-4130-14 1 off *
F. Torque adapter 28-0-4130-15 1 off *
G. Strap 28-0-4130-40 1 off
H. Case 28-0-4130-33 1 off
Parts list Part E

1. Nut DIN934M10-62AA 1 off
2. Bush 28-0-4130-22 1 off
3. Ring-retaining 28-0-4130-27 1 off
4. Washer DIN125B10-55AA 1 off
5. Plug MS24391D8 1 off
6. Bar 28-0-4130-23 1 off
Part F
1. Pin 28-0-4130-20 1 off
2. Collar 28-0-4130-19 1 off
3. Plug MS24391D8 1 off
4. Bar 28-0-4130-24 1 off
Part G
1. Collar 28-0-4130-43 1 off
2. Webbing 28-0-4130-44 1 off
3. Pin 28-0-4130-42 1 off
4. Ring-key 28-0-4130-45 1 off
5. Tag-identification 28-0-4130-46 1 off
Effectivity : All.
* NOTE: Not applicable for aircraft fitted with Menasco control unit
P/N 45000-1.
Finish : A caution flag must be attached to each of these tools (Refer to
chapter 20).
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 403/404
27-41-01 SEP 01/94
FOKKER 70/100

TOOL - FIXATION
VIEW A
Usage: To hold the horizontal stabilizer during removal and

installation of the stabilizer control unit.
Effectivity: All
Quantity: 1 off
PAGE 401/402
27-41-04 NOV 01/09
FOKKER 70/100
Deutsche Aerospace

TOOL - FIXATION
Usage To hold the horizontal stabilizer during removal and installation

of the stabilizer control unit.
Parts list 1. Wheel, hand NLM665-150 1 off
2. Pin, dowel DIN6325M6-5x60 1 off
3. Nut DIN934M16 4 off
4. Rod,threaded 28-0-1827-16 1 off
7. Contour assembly 28-0-1827-05 1 off
8. Block, threaded 28-0-1827-23 1 off
9. Shaft assembly 28-0-1827-01 1 off
10. Nut 28-0-1827-15 1 off
11. Pad, rudder 28-0-1827-27 1 off
12. Screw, thumb 28-0-1827-14 1 off
13. Plate, instruction 28-0-1827-41 1 off
14. Ring, key FON2-9110-20 2 off
15. Chain 28-0-1827-38 1 off
16. Bush threaded 28-0-1827-09 1 off
18. Housing 28-0-1827-10 1 off
20. Bush 28-0-1827-11 1 off
21. Pin, cotter MS24665-24 2 off
22. Pin 28-0-1827-13 2 off
23. Bracket 28-0-1827-25 1 off
24. Pin, dowel 28-0-1827-21 1 off
25. Screw 28-0-1827-22 2 off
26. Bush 28-0-1827-12 1 off
27. Bracket 28-0-1827-24 1 off
Effectivity All.
Quanti ty 1 off.
Vendor code Part 1
code: F2774
PAGE 403/404
27-41-04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

SLING - HOISTING
140mm
(5,5 in)
65mm
V {2,6in)
VIEW X
F100-TEM-0032b
Usage : To hoist the horizontal stabilizer control unit with a crane.

MANUAL, GEM 0150.
Effectivity : For mark 0100 only up to and including serial number 11540.
Finish : Colored yellow.
Quanti ty : 1 off.
PAGE 401
27-42-01 SEP 01/94
FOKKER 70/100
Dcutsctte Aerosoace

FIXTURE - HOISTING
F100-TEM-0103
PAGE 402
SEP 01/94
FOKKER 70/100
Deutsche Aerospace

FIXTURE - HOISTING
Usage To remove or install the horizontal stabilizer control unit. To be

used in conjunction with p/n 28-0-1738C.
Tool
consists of : A. Beam assy
B. Strut assy LH forward
C. Strut assy RH forward
D. Strut assy rear
E. Support
F. Trolley
G. Cable assy
H. Shackle
I. Plate
Effectivity All.
Quantity 1 off.
PAGE 403
27-42-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SLING - HOISTING
PAGE 404
SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

SLING - HOISTING
Usage : To hoist the Menasco horizontal stabilizer control unit p/n

45000-1.
Tool
consists of : A. Sling
B. Bar
MANUAL, GEM TBD.
Effectivity : For mark 0100 serial number 11541 and up.
For mark 0070 serial number 11521 and up.
Finish : Colored yellow.
Quantity : 1 off.
PAGE 405/406
27-42-01 SEP 01/94
FOKKER70/100
Part number : AT24742

TOOL - SPLINED SHAFT
Usage Functional check of the stabilizer control unit No-Back

mechanism.
Effectivity Fokker70.
Finish Not applicable.
Quantity 1 off.
Vendor 02121.
PAGE 501/502
27-42-01 AUG 01/99
FOKKER70/100

TORQUE TOOL - ELECTRIC MOTOR
16,0mm
(G,63in)
25,4mm
(1,QQm)
Usage Functional check of the Electro Magnetic Brake of the

stabilizer control unit Electric Motor.
Effectivity Fokker70.
Quantity 1 off.
Vendor 02121.
PAGE 501/502
27-44-01 AUG 01/01
FOKKER 70/100
De utscne Aerospace

TORQUE ADAPTER - FLAP ATTACHMENT NUT
98mm
(3,85in)
Usage : To torque the flap attachment nuts.

Effectivity : All.
Quantity : 1 off.
PAGE 401
SEP 01/94
FOKKER 70/100
Deutscne Aerospace

SLING - INBOARD FLAP HOISTING
603mm
23.8m)
1112mm
(43.8m)
F100-TEM-313
Usage : To hoist the inboard flap.

Effectivity : All.
Finish : The sling is colored yellow.
Weight and
Quantity : 1 off.
PAGE 402
rn
-U I SEP 01/94
FOKKER 70/100
Deutsche Aerospace

TEST SET - SELECTION AND SYNCHRO ADJUSTMENT
F100-TEM-0185
Usage : Electrical flap selection and synchro adjustment.

Tool
B. Cable assy'
Parts list : FOR PART AND MAINTENANCE INFORMATION, REFER TO THE GROUND
Effectivity : All.
Weight and
packaging : 2 boxes.
Quantity : 1 off.
PAGE 403/404
27-50-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : DIN1810A45-50

SPANNER - ECCENTRIC BUSH
6mm
(0,23in)
F100-TEM-0033
Usage : To adjust flap trailing edge.
Effectivity : All.
Quantity : 1 off.
PAGE 501
27-50-01 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

SET - FLIGHT CONTROLS FEELER
(0,79 in)
F100-TEM-0023
Usage To measure clearances between shroud and flaps.

Tool
consists of : A. Feeler 1.0 mm (0 9 040 in) 28-0-2055-01 1 off
B. Feeler 1.5 mm 9 059 in) 28-0-2055-02 1 off
C. Feeler 2.0 mm (0 9 079 in) 28-0-2055-03 1 off
D. Feeler 2.5 mm (0 9 098 in) 28-0-2055-04 1 off
E. Feeler 3.0 mm (0 9 120 in) 28-0-2055-05 1 off
F. Feeler 4.0 mm (0 9 157 28-0-2055-06 1 off
G. Feeler 4.5 mm (0 9 177 in) 28-0-2055-07 1 off
H. Feeler 5.0 mm (0 9 197 in) 28-0-2055-08 1 off
J. Feeler 5.5 mm (0 9 217 in) 28-0-2055-09 1 off
K. Feeler 6.5 mm (0 9 256 in) 28-0-2055-10 1 off
L. Feeler 7.5 mm 9 295 in) 28-0-2055-11 1 off
M. Feeler 8.0 mm (o 9316 in) 28-0-2055-12 1 off
Effactivity : All.
Weight and
packaging In plastic bag.
Quanti ty 1 off.
PAGE 502
27-50-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

SPANNER - ECCENTRIC BUSH, FLAP DEFLECTION TROLLEY
VIEW A
F100-TEM-0390
Usage : To adjust the flap trailing edge.

Effactivity : All.
Quantity : 1 off.
PAGE 503/504
27-50-01 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

SLING - OUTBOARD FLAP HOISTING
650mm
(25,6m)
1030mm
(40.5m)
F100-TEM-314
Usage : To hoist the outboard flap.

Effectivity : All.
Finish : The sling is colored yellow.
Quantity : 1 off.
PAGE 401/402
27-50-02 SEP 01/94
FOKKER 70/100
Deutsche Aerospace
PAGE 501
27-50-03 SEP 01/94
FOKKER 70/100
A member of
Deutscfte Aerospace

PLATE - FLAP AND VANE RIGGING
160mm
(6,29 in)
800mm
200mm (31,49 in)
(7,87 in)
F100-TEM-0183a
PAGE 502
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

PLATE - FLAP AND VANE RIGGING
Usage : To rig the flaps and vanes.

Tool
consists of A. Plate-rigging 28-0-4085-02 1 off
B. Plate-rigging 28-0-4085-03 1 off
C. Plate-rigging 28-0-4085-04 1 off
D. Plate-rigging 28-0-4085-05 1 off
E. Box 28-0-4085-01 1 off
Parts list Part A
1. Plate-information 28-0-4085-13 1 off
Part B
Part C
Part D
Effectivity : All.
Weight and
packaging 15.4 kg (33,88 Ib), 1 wooden box.
Quanti ty 1 off.
PAGE 503
27-50-03 SEP 01/94
FOKKER 70/100
wrof
DeutscneAerosoace

SET - RIGGING PIN
F100-TEM -
PAGE 504
27-50-03 SEP 01/94
FOKKER 70/100
A member of
oeutscne Aerospace

SET - RIGGING PIN
Usage To adjust the flap shroud doors and vanes.

Tool
F. Case 28-0-4157-27 1 off
Effectivity All.
Finish A caution flag must be attached to each of these tools (Refer to
chapter 20).
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 505/506
27-50-03 SEP 01/94
FOKKER 70/100
A member of
DeutseneAcrosoace
PAGE 501
27-51 -00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

SET - RIGGING PIN
80mm
(3.15in)
F100-TEM-01070
PAGE 502
HO
-UU SEP 01/94
FOKKER 70/100
Amcnibcr of
Deutscne Aerosoace

SET - RIGGING PIN
Usage : To rig the flap control system.

Tool
consists of : A. Pin-rigging 28-0-3973-01 1 off
Effectivity : All.
Finish : A caution flag must be attached to each of the pins (Refer to

chapter 20).
Weight and
packaging : 1 case.
Quanti ty 1 off.
PAGE 503/504
27-51 -00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
PAGE 501
ov CQ nn
*L/-OO-UU SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

TOOL SET - FLAP CARRIAGE ADJUSTMENT
125mm
(4.92in)
W.STA 8200
ADJUSTMENT
TOOL F100-TEM-315
PAGE 502
SEP 01/94
FOKKER 70/100
A member of
DeutseneAerosoace

TOOL SET - FLAP CARRIAGE ADJUSTMENT
Usage To adjust the flap carriages in the correct position.

Tool
consists of A. Adjustment tool 28-0-3980-05 1 off
B. Adjustment tool 28-0-3980-01 1 off
C. Adjustment tool 28-0-3980-03 1 off
D. Adjustment tool 28-0-3980-04 1 off
E. Adjustment tool 28-0-3980-02 1 off
F. Adjustment tool 28-0-3980-15 1 off
Effectivity : All
Weight and
packaging In wooden box.
Quantity 1 off.
PAGE 503/504
27-53-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TOOL - CONCENTRICITY CHECKING
175mm
350mm (6.88 in)
(13.8in)
300mm
(11,8 in)
80mm
(3.2 in)
175mm
(6.88 in)
F100-TEM-0104Q
Usage To check in the concentricity of the flap screw spindles. To be

used with a locally supplied dial gauge with flat end or
equivalent.
Parts list 1. Screw 28-0-2320-03 6 off
2. Nut 28-0-2320-06 1 off
3. Bolt 28-0-2320-04 1 off
4. Block 28-0-2320-01 1 off
5. Clamp 28-0-2320-02 2 off
6. Bar 28-0-2320-05 2 off
7. Case 28-0-2320-15 1 off
Effectivity : All.
Weight and
packaging : 1 case.
Quanti ty 1 off.
PAGE 601/602
27-53-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : 10981

PLIERS - INSTALLATION
F100-TEM-0075
Usage : To remove and install flexible drive shaft clamping strips,

Effectivity : Pre SBF100-27-048.
Quantity : 1 off.
Vendor code : S3909.
NOTE; Pos SBF100-27-048; P/N 10991
PAGE 401/402
27-53-04 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace
THIS PAGE IS LEFT BLANK INTENTIONALLY
PAGE 601
27-53-05 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

TOOL - BACKLASH CHECKING
DIAL GAUGE
(LOCAL SUPPLY)
95mm
(3.74 in)
350mm
(13,77 in)
F100-TEM-0316a
PAGE 602
SEP 01/94
FOKKER 70/100
A member of
DeutscfteAerosoace

TOOL - BACKLASH CHECKING
Usage To check the ball-nut backlash on the flap actuator. To be used

with a locally supplied dial gauge.
Tool
consists of A. Screw jack assy 28-0-4080-01 1 off
B. Clamp 28-0-4080-03 1 off
C. Gauge foot 28-0-4080-02 1 off
D. Case 28-0-4080-29 1 off
Parts list Part A
1. Spindle 28-0-4080-09 1 off
2. Block (Macthed set) 28-0-4080-08 1 off
3. Knob 28-0-4080-11 2 off
4. Swivel foot 28-0-4080-27 1 off
Part B
1. Pin 28-0-4080-16 1 off
2. Block 28-0-4080-21 1 off
3. Pin 28-0-4080-17 1 off
4. Pin 28-0-4080-12 1 off
5. Knob 28-0-4080-13 1 off
6. Block 28-0-4080-20 1 off
7. Pin 28-0-4080-10 1 off
Part C
1. Screw 28-0-4080-14 1 off
2. Pin 28-0-4080-15 1 off
3. Block 28-0-4080-22 1 off
Effectivity : All.
Weight and
packaging 1 plastic case.
Quanti ty 1 off.
PAGE 603/604
27-53-05 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

TEST BOX - FLAP CONTROL DATA UNIT
130mm
{5,1 in)
Usage For test and repair of the flap control data unit, type EAFCD8518.
Tool
C. Cable assembly
MANUAL, GEM 0144.
Effectivity : All.
Weight and
packaging 6 kg (13,2 Ib), 1 case.
Quanti ty 1 off.
PAGE 101/102
27-55-02 SEP 01/94
FOKKER 70/100
DeutseheAerosoace

PIN - SPEEDBRAKE HANDLE SAFETY
13mm
F100-TEM-03T7
Usage To lock the speedbrake control lever during maintenance.

Effectivity All.
Finish A caution flag must be attached to this tool (Refer to
chapter 20).
Quantity 1 off.
PAGE 401/402
27-60-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

GAUGE - SETTING, LIFTDUMPER MECHANICAL DRIVE SYSTEM
ZONE
ZONE 654
ZONE 652
ZONE 552
ZONE SSL
F100-TEM-0389
Usage To check the overcenter position of the liftdumper bell cranks.

Parts list 1. Gauge 28-0-4848-01 1 off
2. Gauge 28-0-4848-02 1 off
3. Plate 28-0-4848-05 2 off
4. Screw DIN963M4xl2 4 off
5. Case 28-0-4848-15 1 off
NOTE: Use item 1 for liftdumpers No. 1,2 and 5.
Use item 2 for liftdumpers No. 3 and 4.
Effectivity : All aircraft with proximity switches.
Weight and
packaging In plastic case.
Quanti ty 1 off.
PAGE 501/502
27-60-02 SEP 01/94
FOKKER 70/100
Deutsche Acrosoaee

PULLER - ACTUATOR MOUNTING PIN
65mm
(2.55in)
150mm
(5,90in)
F100-TEM-0039
Usage To remove speedbrake actuator mounting pins.

Parts list 1. Body 28-0-2138-01 1 off
2. Rod, threaded 28-0-2138-05 1 off
3. Nut 28-0-2138-06 1 off
4. Washer 28-0-2138-07 1 off
Effectivity All.
Quantity 1 off.
PAGE 401/402
27-61-02 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerosoace

TEST SET - LIFTDUMPER SWITCHES
124mm (4,9in)
203mm(8,0in} 140 mm (5,5 in)
F100-TEM-0318
Usage : To make a fault isolation of the liftdumper switches in case of a

fault warning.
Tool
B. Cable assembly
MANUAL, GEM 0159.
Effectivity : Aircraft ser. no. 11268 thru 11275, 11277 and 11279.
Weight and
packaging : 1 metal case.
Quanti ty : 1 off.
PAGE 501/502
27-65-00 SEP 01/94
FOKKER 70/100
A member of
DeutscfteAcrosoace

GAUGE - SETTING
140mm
90mm (5,5in)
(3,5in) F100-TEM-0042a
Usage Rigging of the liftdumper mechanical drive system.

NOTE: Use item A for liftdumpers No. 1,2 and 5.
Use item B for liftdumpers No. 3 and 4.
Tool
consists of : A. Gauge-setting 28-0-1851-02 1 off
B. Gauge-setting 28-0-1851-03 1 off
C. Wooden box 28-0-1851-15 1 off
Effectivity : Aircraft ser. no. 11242 thru 11265.
Weight and
Quantity : 1 off.
PAGE 201/202
27-66-00 SEP 01/94
FOKKER 70/100
A member of
oeutscne Aerosoace

SPANNER - LIFTDUMPER BELL CRANK RETAINER NUT
18mm
(0,70 in)
60mm
2,36 in)
F100-TEM-0041
Usage : To remove/install the retainer nut.

Effectivity : All.
Quantity : 1 off.
PAGE 401/402
27-66-01 SEP 01/94
FOKKER 70/100
Deutsche Aerosoxe

SET - ADAPTER, LIFTDUMPER MECHANICAL SYSTEM
80mm
(32in)
F100-TEM-0388
Usage : To remove the overcenter torque value of the liftdumper mechanical

system.
Tool
consists of : A. Adapter 28-0-5011-01 1 off
B. Adapter 28-0-5011-02 1 off
C. Case 28-0-5011-05 1 off
Effectivity : All.
Weight and
packaging : 1 case.
Quanti ty : 1 off.
PAGE 501/502
27-66-02 SEP 01/94
FOKKER 70/100
A member of
oeutscneAerosoace

SET - RIGGING PIN, FLIGHT CONTROL LOCK
ZONE 187
350mm
(13.77in)
F100-T£M-0303a
Usage To rig the flight control lock system.

Set
consists of : A. Pin-rigging 28-0-3958-01 1 off
C. Case 28-0-3958-08 1 off
Effectivity : 1 case.
Quantity : 1 off.
PAGE 501/502
27-71 -00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

PULLER - SUPPORT ASSEMBLY BUSHING
F100-TEM-0040
Usage To remove/install speedbrake actuator attachment bushes,

Parts list 1. Bush 28-0-2215-01 1 off
2. Bush 28-0-2215-02 1 off
3. Rod, threaded 28-0-2215-07 1 off
4. Nut 28-0-2215-08 2 off
5. Washer 28-0-2215-09 2 off
Effectivity : All.
Quantity : 1 off.
PAGE 201/202
27-90-01 SEP 01/94
FOKKER 70/100
Deuiscne Aerospace

TEST SET - WHEEL SPEED SIMULATION, LIFTDUMPER
F100-TEM-0348
Usage Wheel speed simulation for fault isolation of the liftdumper

system.
Tool
consists of A. Test box 28-0-4215A 1 off
B. Cable assembly 28-0-4215-51 1 off
C. Cable assembly 28-0-4215-65 1 off
MANUAL, GEM 0157.
Effectivity All.
Quantity 1 off.
| Supplementary data:
This tool supersedes the 28-0-4215 which still can be used for aircraft with
serial no: up/incl. 11540.
The 28-0-4215 testbox is in conjunction with cable 28-0-4215-65 also applicable
for aircraft serial no: 11542 and up.
Cable 28-0-4215-65 can be ordered separately.
PAGE 501/502
27-90-02 MAR 01/95
FOKKER 70/100
Deutsche Aerospace

TEST BOX - ENHANCEMENT UNIT SPC
F100-TEM-0349
Usage : For repair and overhaul of the stall protection enhancement box,
type EASPE8801.
Tool
C. Cable assembly
D. Mounting bracket
MANUAL, GEM 0101.
| Effectivity : Up to including serial number 11540
Quantity 1 off.
PAGE 501/502
27-90-03 MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace
PAGE 401
27-91-04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

SLING - HOISTING
F100-TEM-0105a
PAGE 402
SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

SLING - HOISTING
Usage To hoist the horizontal stabilizer with or without elevators.

Tool
consists of A. Cable assy 28-0-4524-07 2 off
C. Shackle 28-0-4524-15 1 off
D. Shackle 28-0-4524-16 2 off
E. Shackle 28-0-4524-17 4 off
F. Plate assy 28-0-4524-01 1 off
G. Rod-threaded 28-0-4524-09 4 off
H. Washer 28-0-4524-10 4 off
J. Nut M12 4 off
K. Cap 28-0-4524-21 4 off
MANUAL, GEM 0114.
Effectivity : All.
Weight and
Quantity 1 off.
27-91-04 PAGESEP403/404
01/94
FOKKER 70/100
A member of
Deuische Aerospace
PAGE 401
27-91-05 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace

SET - RIGGING PIN
PAGE 402
MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace

SET - RIGGING PIN
Usage To rig the elevator control system.

Tool
consists of A. Tool-checking 28-0-2076 1 off
B. Pin-rigging 28-0-3928 1 off
C. Pin-rigging 28-0-3929 2 off
G. Tool-checking 28-0-2657-01 1 off
J. Case 28-0-4102-01 1 off
Parts list Part B
1. Bar-steel 28-0-3928-02 1 off
2. Bar-steel 28-0-3928-03 2 off
3. Washer 28-0-3928-05 2 off
4. Nut 28-0-3928-06 2 off
Effectivity : All.
Finish : A caution flag must be attached to each of the pins (refer to
chapter 20).
Weight and
packaging : 1 case.
Quanti ty : 1 off.
PAGE 403/404
27-91-05 SEP 01/94
FOKKER 70/100
_ jerof
Deutscne Aeroso3ce
PAGE 01
SEP I
01/94
FOKKER 70/100
A member of
DeutscneAerosoace

FIXTURE - ELEVATOR HOISTING
2373 mm
193.4 in)
F100-TEM-0350
PAGE 402
-91- SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

FIXTURE - ELEVATOR HOISTING
Usage To hoist a LH or RH elevator.

NOTE; The tool can be equipped with a hand pulley assembly, or
with a mini lift winch. Both versions have the same
partnumber.
Parts list FOR PARTS AND MAINTENANCE INFORMATION. REFER TO THE GROUND
Effectivity : All.
Weight and
Quantity 1 off.
PAGE 403/404
SEP 01/94
FOKKER 70/100
Deutsche Aerospace

FIXTURE - SPEEDBRAKE CHECK
100mm
(3,94 in)
870mm
(34,25 in)
400mm
(15,75 in)
F100-TEM-0351
PAGE 402
CH H7
y I-U/ SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

FIXTURE - SPEEDBRAKE CHECK
Usage To check the maximum speedbrake travel.

Parts list 1. Case 28-0-4750-18 1 off
2. Sheet-form 28-0-4750-19 1 off
3. Plate-serial 28-0-4750-20 1 off
4. Ring-retaining DIN471-D=4 S=0.4 2 off
5. Washer DIN125M4 2 off
6. Nut DIN6303NLM601 2 off
type B, M6
7. Washer 28-0-4750-08 1 off
8. Plate 28-0-4750-04 1 off
9. Bolt 28-0-4750-10 1 off
10. Plate 28-0-4750-07 1 off
11. Plate 28-0-4750-03 1 off
12. Screw DIN912,M4x20 4 off
13. Pin DIN6325,4x20 4 off
15. Pin DIN6325,6x24 4 off
Effectivity All.
Quantity 1 off.
PAGE 403/404
27-91 -07 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
PAGE 401
SEP 01/94
FOKKER 70/100
A member of
Deuocne Aerospace

SPANNER - ECCENTRIC SPINDLE ASSEMBLY
3mm
34mm
(1.33in)
F100-TEM-0036
Usage : To set flap fairing spindles during adjustment.

Effectivity : All.
Quantity : 1 off.
PAGE 501/502
27-93-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

SPANNER - ADJUSTMENT
72mm
(2,83 in)
20mm
(0,78 in) F100-TEM-0035
Usage To remove/install vane cables on the Tee-lever assembly in the

flap and to adjust main landing gear door sequence valve
microswitch.
Effectivity All.
Quanti ty 1 off.
PAGE 401/402
27-93-02 SEP 01/94
FOKKER 70/100
Amefnbcr of
Deutsche Aerosoace

SET - TORQUE ADAPTER
F100-TEM-0106
Usage : To tighten and torque the horizontal stabilizer bearing nuts,

Tool
B. Adapter 28-0-4058-03 1 off
C. Case 28-0-4058-14 1 off
Effectivity : All.
Weight and
packagi ng : 1 case.
Quanti ty : 1 off.
PAGE 401/402
27-95-02 SEP 01/94
FOKKER 70/100
A member of
Deutscfte AerosMce

PLUG - STALL WARNING SYSTEM TEST
F100-TEM-0108
Usage : To enable functional testing of the stall warning system.

Parts list 1. Plug PVW6R16-26PNL 1 off
2. Contact M39029-4-110 3 off
3. Clamp FON9-4945-04 1 off
4. Cable 28-0-4167-04 AR
5. Cap MS25274-3 1 off
Effectivity : All.
Finish : A caution flag must be attached to this tool (refer to chapter 20)
Quantity : 1 off.
PAGE 601/602
27-97-01 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace
FIXTURE - SPRING BUNGEE CHECKING, HORIZONTAL STAB AND AILERON SERVO VALVE
38
15
F100-TEM-0347a
Usage To check the condition of the internal spring in the bungee assy.
2. Screw 28-0-4643-15 1 off
3. Block-clamp 28-0-4643-05 1 off
4. Piller 28-0-4643-03 1 off
5. Measuring clock (not included)
6. Stop 28-0-4643-04 1 off
7. Pin DIN7-A2-6x60 2 off
8. Screw-socket DIN912 M6x20 ZINCED 8 off
9. Gauge 28-0-4643-035 1 off
10. Bar 28-0-4643-08 2 off
11. Bar-cross 28-0-4643-09 1 off
12. Support 28-0-4643-07 1 off
13. Pin DIN7-A2-6x24 6 off
14. Screw-bar 28-0-4643-11 1 off
15. Handle 28-0-4643-36 1 off
16. See item 8
17. See item 13
18. See item 8
19. Washer DIN125 M6-4ST ZINCED 2 off
20. See item 7
21. Guide 28-0-4643-10 2 off
22. See item 8
23. Screw-socket C-1960-12.9 2 off
5/8"-llUNCxl
PAGE 201
27-97-02 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

FIXTURE - SPRING BUN6EE CHECKING, HORIZONTAL STAB AND AILERON SERVO VALVE
24. See item 7

25. Piece-distance 28-0-4643-16 1 off
26. Fork 28-0-4643-06 1 off
27. See item 8
28. Pin 28-0-4643-12 1 off
29. Pin 28-0-4643-13 1 off
30. Lanyard 28-0-4643-26 3 off
31. Rivet MS21318-29 3 off
32. See item 7
33. See item 8
34. See item 30
35. See item 31
36. Plate-name 28-0-4643-28 1 off
37. Rivet 28-0-4643-29 2 off
38. Pin 28-0-4643-14 1 off
39. Bracket 28-0-4643-02 1 off
40. Base 28-0-4643-01 1 off
Effectivity : All.
Weight and
packaging 7.3 kg (16,09 Ib).
Quanti ty 1 off.
PAGE 202
27-97-02 SEP 01/94
FOKKER 70/100

E E
LEP 1/2 MAY 01/11 R

CONTENTS 1/2 MAY 01/11 R
28-00-00 201 MAY 01/11 R
28-00-00 202 MAY 01/11 R
28-00-00 203 MAY 01/11 R
28-00-00 204 MAY 01/11 R
28-00-00 205 MAY 01/11 R
28-00-00 206 MAY 01/11 R
28-00-00 501 NOV 01/09
28-00-00 502 NOV 01/09
28-13-01 401 SEP 01/94
28-13-01 402 SEP 01/94
28-13-02 401 SEP 01/94
28-13-02 402 SEP 01/94
28-15-00 501 SEP 01/94
28-15-00 502 SEP 01/94
28-16-11 401 SEP 01/94
28-16-11 402 SEP 01/94
28-20-00 501 MAY 01/11 N
28-20-00 502 MAY 01/11 N
28-20-00 503 MAY 01/11 N
28-20-00 504 MAY 01/11 N
28-20-00 505 MAY 01/11 N
28-20-00 506 MAY 01/11 N
28-20-00 507 MAY 01/11 N
28-20-00 508 MAY 01/11 N
28-20-00 509 MAY 01/11 N
28-20-00 510 MAY 01/11 N
28-21-04 401 SEP 01/94
28-21-04 402 SEP 01/94
28-41-00 501 MAR 01/95
28-41-00 502 SEP 01/94
28-41-02 401 SEP 01/94
28-41-02 402 SEP 01/94
28-90-01 401 SEP 01/94
28-90-01 402 SEP 01/94
28-90-01 501 SEP 01/94
28-90-01 502 SEP 01/94
28-90-02 401 SEP 01/94
28-90-02 402 SEP 01/94
28-91-01 501 SEP 01/94
28-91-01 502 SEP 01/94
28-92-01 401 SEP 01/94
28-92-01 402 SEP 01/94
Page 1/2
LEP CHAPTER 28 MAY 01/11
FOKKER 70/100
TABLE OF CONTENTS
28-0-1482B PLUG - CROSSFEED VALVE DE-ACTIVATION 28-00-00 201

28-0-1482C PLUG - CROSSFEED VALVE DE-ACTIVATION 28-00-00 202
28-0-1482D PLUG - CROSSFEED VALVE DE-ACTIVATION 28-00-00 203
28-0-1482E PLUG - CROSSFEED VALVE DE-ACTIVATION 28-00-00 204
W69691-401 DE-ACTIVATION TOOL – CROSS FEED VALVE 28-00-00 205
A102/17 HANDLE – VALVE DE-ACTIVATION 28-00-00 501
I500C SET - C SPANNER 28-13-01 401
209352 SPANNER - INLET VALVE 28-13-02 401
H0041 CAP - WING TANK TEST 28-15-00 501
28-0-1785C HOSE - FUEL SYSTEM DRAIN 28-16-11 401
F28-FTM-R020-023 BLANKING-TOOL, VENT/OVERFLOW LINES 28-20-00 501
F28-FTM-R020-025 BLANKING-TOOL, FILL/TRANSFER LINES 28-20-00 503
F28-FTM-R020-027 BLANKING-TOOL, FILL/TRANSFER LINE OUTSIDE 28-20-00 505
FUSELAGE
F28-FTM-R020-029 BLANKING-TOOL, VENT/OVERFLOW LINE OUTSIDE 28-20-00 507
FUSELAGE
W98841-001 TOOL, AUX TANKS INSTALLATION RAILS 28-20-00 509
305-159 SET - SPANNER, FUEL SYSTEM OVERFLOW VALVE 28-21-04 401
PSD30-2G TEST BOX - FUEL QUANTITY PROBES 28-41-00 501
0206KAQ-01 KIT - ACCESSORY LB VERSION 28-41-00 502
0207KAQ-01 KIT - ACCESSORY KG VERSION 28-41-00 502
0215KAQ-01 KIT - ACCESSORY ICT 28-41-00 502
0602KQC03 TEST BOX - FUEL QUANTITY SYSTEM 28-41-00 502
28-0-2069 SET - SPANNER, TRANSMITTER CENTERWING TANK 28-41-02 401
28-0-2164 SPANNER - CENTERWING TANK MANIFOLDS 28-90-01 401
28-0-2197 CABLE - TEST, VALVE MOTOR CENTERWING TANK 28-90-01 501
28-0-3266C KIT - CW TANK BLANKING 28-90-02 401
27-1-4441 CONTRLLR - AIR PRESSURE 28-91-01 501
28-0-4499 ADAPTER - FUEL LINE COUPLING TORQUE 28-92-01 401
Page 1/2
28 CONTENTS MAY 01/11
FOKKER 70/100
Part number: 28-0-1482B

PLUG – CROSSFEED VALVE DE-ACTIVATION
Usage : To link the electrical wires for de-activation of the crossfeed valve.
Parts list : 1. Receptacle FON9-4992B6PNL 1 off

2. Pin M39029/4-110 4 off
3. Strain-relief FON9-4946-10 1 off
4. Plate-serial FON7-1317A 1 off
5. Ring FON2-9110-16 1 off
6. Wire 28-0-1482-06
Effectivity : All, Pre Mod SBF100-28-046/047/061
Quantity : 1 off.
PAGE 201
28-00-00 MAY 01/11
FOKKER 70/100
Part number: 28-0-1482C

Usage : To link the electrical wires for de-activation of the crossfeed valve.
Parts list : 1. Receptacle FON9-4992B6PWL 1 off

2. Pin M39029/4-110 4 off
5. Ring FON2-9110-16 1 off
6. Wire 28-0-1482-06
Effectivity : All, Post Mod SBF100-28-046/061.
Quantity : 1 off.
PAGE 202
28-00-00 MAY 01/11
FOKKER 70/100

Usage : To link the electrical wires for testing of the crossfeed valve.
Parts list : 1. Receptacle FON9-4992B6PWL 1 off

2. Pin M39029/4-110 2 off
5. Ring FON2-9110-16 1 off
6. Wire 28-0-1482-06
Effectivity : All, Post Mod SBF100-28-047
Quantity : 1 off.
PAGE 203
28-00-00 MAY 01/11
FOKKER 70/100
Part number: 28-0-1482E

Usage : To link the electrical wires for testing of the crossfeed valve.
Parts list : 1. Receptacle FON9-4992B6PNL 1 off

2. Pin M39029/4-110 2 off
5. Ring FON2-9110-16 1 off
6. Wire 28-0-1482-06
Effectivity : All, Post Mod SBF100-28-047
Quantity : 1 off.
PAGE 204
28-00-00 MAY 01/11
FOKKER 70/100
Part number : W69691-401

DEACTIVATION TOOL – CROSS FEED VALVE
Usage : To hold the valve in the open position.
Parts list : 1. Plate W69691-001 1 off

2. Bolt NAS1096-3-8 2 off
Effectivity : All, Post Mod SBF100-28-046/061
Quantity : 1 off.
PAGE 205/206
28-00-00 MAY 01/11
FOKKER70/100
Part number : A102/17

HANDLE - VALVE DE-ACTIVATION
sm
?5 in!
Usage To hold the valve in the open positon.

Effectivity 11244 thru 11441 (Pre Mod SBF100-28-061)
Quantity 1 off.
Vendor U1918.
PAGE 501/502
28-00-00 NOV 01/09
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : I500C

SET - C SPANNER
170mm (6,69in)
F100-TEM-0319
Usage : To remove and install Wig-0-Flex couplings. C spanners can also be

used with locally supplied torque and socket wrenches with a 3/8"
drive.
Tool
consists of : A. Set C spanners, one each of the following sizes:
6D,8D,10D,12D,16D,20D,24D,28D,32D,40D,48D,56D and 64D.
B. Handle J140 1 off
Effectivity : All.
Weight and
packaging : 1 metal box.
Quantity : 1 off.
PAGE 401/402
28-13-01 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace
Part number : 209352

SPANNER - INLET VALVE
90mm
(3,54in)
62mm
(2,4610)
40mm
(1,57in)
I
I VIEW B
Usage To remove or install the inlet valve during canister maintenance.
DOCUMENTATION.
Effectivity : All.
Quantity 1 off.
28-13-02
PAGE 401/402
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : H0041

CAP - WING TANK TEST
100mm
(3.93 in J
60mm
(2.36m)
F100-TEM-0053
Usage : Testing of main tank. To be used with p/n H0040.

Effectivity : All.
Quantity : 1 off.
PAGE 501/502
28-15-00 SEP 01/94
FOKKER 70/100
A member of
oeutscne Aerospace

HOSE - FUEL SYSTEM DRAIN
F100-TCM-00<f6
Usage For draining and testing the crossfeed system.

Parts list 1. Coupling 3755-16 1 off
2. Nut AN818-16C 1 off
3. Union 28-0-1785-07 1 off
4. Clamp FON2-7103-06 3 off
5. Cock stop 28-0-1785-04 1 off
6. Hose 28-0-1785-02 1 off
7. Hose 28-0-1785-03 1 off
Effectivity All.
Quanti ty 1 off.
Vendor code Part 1
code: 16717
PAGE 401/402
28-16-11 SEP 01/94
FOKKER 70/100
Part number: F28-FTM-R020-023

BLANKING-TOOL, VENT/OVERFLOW LINES
Usage : To blank the Vent/Overflow lines.
Parts list : 1. Blanking tool F28-FTM-R020-23 2 off

2. Bolt NAS1304-30 16 off *
3. Nut MS21042L4 16 off *
4. Washer AN960-416L 32 off *
5. Seal MS29513-222 2 off *
6. Seal MS29513-332 2 off *
7. Blanking Plug MS24404-D4 2 off *
8. O ring MS29513-012 2 off *
* Local Supply
Effectivity : Aircraft with the Auxiliary Fuel Tank System installed.
Quantity : 1 off.
Vendor code : HOW98.
PAGE 501/502
28-20-00 MAY 01/11
FOKKER 70/100

BLANKING-TOOL, FILL/TRANSFER LINES
Usage : To blank the Fill/Transfer lines.

2. Bolt NAS1304-24 16 off *
3. Nut MS21042L4 16 off *
4. Washer AN960-416L 32 off *
5. Seal MS29513-218 2 off *
6. Seal MS29513-226 2 off *
7. Blanking Plug MS24404-D4 2 off *
8. O ring MS29513-012 2 off *
* Local Supply
Quantity : 1 off.
PAGE 503/504
28-20-00 MAY 01/11
FOKKER 70/100

BLANKING-TOOL, FILL/TRANSFER LINE OUTSIDE FUSELAGE
Usage : To blank the Fill/Transfer lines outside the fuselage.

2. Union MS24392-D4 1 off *
3. Seal MS29513-218 2 off *
4. O ring MS29513-012 1 off *
* Local Supply
Quantity : 1 off.
PAGE 505/506
28-20-00 MAY 01/11
FOKKER 70/100

BLANKING-TOOL, VENT/OVERFLOW LINE OUTSIDE FUSELAGE
Usage : To blank the Vent/Overflow lines outside the fuselage.

2. Union MS24392-D4 1 off *
3. Seal MS9021-222 2 off *
4. O ring MS29513-012 1 off *
* Local Supply
Quantity : 1 off.
PAGE 507/508
28-20-00 MAY 01/11
FOKKER 70/100
Part number: W98841-001

TOOL, AUX TANKS INSTALLATION RAILS
Usage : To Remove/Install the Auxiliary Fuel Tanks from/in the Fwd Cargo Compartment.
Parts list : 1. Rails W98841-001 2 off

2. Stud assy 40351-120 4 off *
3. Washer NAS1252-616L 4 off *
* Local Supply
Quantity : 1 off.
PAGE 509/510
28-20-00 MAY 01/11
FOKKER 70/100
A member of
Deutscne Aerospace

SET - SPANNER, FUEL SYSTEM OVERFLOW VALVE
F28-28-GEl013b
Usage : To replace the overflow valve cable and adjust the spring
compression.
Tool
consists of : A. Outer wrench 305-159-01
B. Inner wrench 305-159-02
C. Inner wrench 305-159-03
Effectivity : All (305-159-02 inner wrench is effective for post SB 28-5 only).
Weight and
packaging : 1.5 kg (3,31 Ib), 1 set.
Quantity : 1 off.
Vendor code : U1918.
PAGE 401/402
28-21-04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
| Part number : PSD30-2G

TEST BOX - FUEL QUANTITY PROBES
152mm
(6.00in)
Usage : To find a defective fuel-quantity probe after a BITE fail

indication.
Tool
consists of A. Testbox PSD30-2G 1 off
B. Ground cable 55-7002-00 1 off
C. Cable assembly 55-0701-00 1 off
D. Cable assembly 55-0701-01 1 off
Parts list : FOR PARTS AND MAINTENANCE INFORMATION REFER TO VENDOR
DOCUMENTATION.
| Effectivity : All.
Weight and
packaging 9 kg (19,8 Ib)
Quantity 1 off.
| Vendor code 41364.
Supplementary data:
This tool supersedes the PSD30-2F which may still be used for aircraft
serial no: up/inc 11441. The PSD30-2F testbox can also be used in conjunction
with cable 55-0701-01 for aircraft serial no: 11442 and up.
Cable 55-0701-01 can be ordered separately.
PAGE 501
28-41-00 MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : 0602KQC-03

TEST BOX - FUEL QUANTITY PROBES
337. mm
(1250in)
F100-TEM-0335
Usage To do a test of the fuel quantity indication system in conjuntion

with accessory kit :
- 0206KAQ-01 LB version
or - 0207KAQ-01 KG version
or - 0215KAQ-01 For intergral Center Tank (s/n 11442 and up).
Parts list FOR PARTS AND MAINTENANCE INFORMATION REFER TO VENDOR
DOCUMENTATION.
Effectivity : All.
Weight and
packaging 13.6 kg (30 Ib).
Quanti ty 1 off.
Vendor code K5294.
PAGE 502
28-41-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SET - SPANNER
100mm
(3,937in)
209mm
(8.23in)
56mm
VIEWX (2,20in)
84mm
(3,30in)
F100-TEM-0109
Usage To install or remove the fuel quantity transmitter in center wing

tank.
Tool
consists of : A. Spanner 28-0-2069-01 1 off
B. Spanner 28-0-2069-06 1 off
Effectivity : All.
Weight and
packaging : 1 bag.
Quanti ty : 1 off.
PAGE 401/402
28-41-02 SEP 01/94
FOKKER 70/100

SPANNER - CENTERWING TANK MANIFOLDS
F100-TEM-OOM
Usage : To remove/install the manifold.

Effectivity : All.
Quantity : 1 off.
PAGE 401/402
28-90-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

CABLE - TEST
F100-TEM-OOt5a
Usage To test the center wing tank valve motors. To be used with
P/N 28-0-1274K or 28-0-4832B.
Parts list : 1. Plug FON9-4991B6SNL 1 off
2. Plug FON9-4991D12PNL 1 off
3. Strain relief FON9-4946-10C 1 off
4. Strain relief FON9-4946-14C 1 off
5. Hose FON1-3624-2 1 off
6. Cable FON9-1800 1 off
7. Pin M39029-4-110 4 off
8. Socket M39029-5-115 5 off
Effactivity All.
Quantity 1 off.
Vendor code Items 1, 2 7 and 8
Code: 71468
PAGE 501/502
28-90-01 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace

KIT - CW TANK BLANKING
liOmm
(5.5in)
F100-TEM-03520
Usage To check the center wing bag-tanks for leakage during
installation.
Tool
consists of A. Connector with relief 28-0-3266-01 1 off
valve
B. Cap 28-0-3266-03 2 off
C. Cap 28-0-4234-01 1 off
D. Cap 28-0-3266-02 1 off
E. Cap 28-0-3266-06 7 off
F. Cap 28-0-3266-05 2 off
G. Cap 28-0-3266-01 6 off
H. Cap 28-0-3266-16 2 off
0. Common connector 28-0-4234-00 1 off
K. Common connector 28-0-4234-02 1 off
Effectivity : Up to/inc aircraft serial number 11441
Weight and
Packaging : 11,5 kg (25,3 Ib), Wooden box.
Quanti ty : 1 off.
PAGE 401/402
28-90-02 SEP 01/94
FOKKER 70/100
^-^ ILLUSTRATED TOOL AND EQUIPMENT MANUAL
Deutsche Aerospace

CONTROLLER - AIR PRESSURE
2'Bmro
i (fl.Sini
P50-TEM-036"
Usage : To provide an accurate adjustable air pressure source for testing

different components in the fuel system with air.
Effectivity : All.
Quantity : 1 off.
PAGE 501/502
28-91-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

ADAPTER - FUEL LINE COUPLING TORQUE
46mm
(Urn)
F100-TEM-0353
Usage : To torque the coupling on the fuel line in the stub-wing.

Effectivity : All.
Quantity : 1 off.
PAGE 401/402
28-92-01 SEP 01/94
FOKKER70/100

E E
LEP 1/2 NOV 01/09 R

29-00-00 201 SEP 01/94
29-00-00 202 SEP 01/94
29-00-03 301 SEP 01/94
29-00-03 302 SEP 01/94
29-00-04 401 SEP 01/94
29-00-04 402 SEP 01/94
29-11-01 401 SEP 01/94
29-11-01 402 SEP 01/94
29-13-00 501 SEP 01/94
29-13-00 502 SEP 01/94
29-30-02 101 SEP 01/94
29-30-02 102 SEP 01/94
29-34-01 401 SEP 01/94
29-34-01 402 SEP 01/94
29-36-00 501 SEP 01/94
29-36-00 502 SEP 01/94
29-37-00 501 SEP 01/94
29-37-00 502 SEP 01/94
29-37-00 801 NOV 01/09 N
29-37-00 802 NOV 01/09 N
29-90-01 401 SEP 01/94
29-90-01 402 SEP 01/94
Page 1/2
FOKKER70/100
TABLE OF CONTENTS
28-0-1268N CONTRLLR - AIR SUPPLY 29-00-00 201

28-0-2199 TOOL - ACCUMULATOR DRAIN 29-00-03 301
28-0-2199D TEST SET - HYDRAULIC RESERVOIR 29-00-03 302
28-0-4074 HOSE - HYDRAULIC SYSTEM DRAIN 29-10-04 401
28-0-1404D ADAPTER - TORQUE, HYDRAULIC PUMP ATTACHMENT 29-11-01 401
BOLTS
28-0-1425A TOOL - INSTALLATION 29-11-01 402
28-0-5195 TEST SET - ACCUMULATOR 29-13-00 501
28-0-3984 TEST BOX - HYDRAULIC INDICATOR 29-30-02 101
28-0-1886C SPANNER - INSTALLATION, HYDRAULIC PRESSURE 29-34-01 401
SWITCHES
HTT165-760E2 CART - HYDRAULIC SYSTEM TEST 29-36-00 501
HTPC-P90E1SZ CART - HYDRAULIC SYSTEM TEST 29-36-00 502
28-0-4037B SET - HYDRAULIC SYSTEM ADAPTER 29-37-00 501
W05005 SET - MANIFOLD TEST ASSY, DIFFERENTIAL 29-37-00 801
PRESSURE SWITCHES
28-0-2210A ADAPTER - TORQUE, HYDRAULIC ACCUMULATOR END 29-90-01 401
CAP
29 CONTENTS ^01)09
FOKKER 70/100
Ameffiber of
Deutsche Aerospace
Part number : 28-0-1268N

CONTROLLER - AIR SUPPLY
220mm
(8,7in)
F100-TEM-0074
Usage To provide a clean dry air supply when using pressurized air from
an external source.
Effectivity All.
Quanti ty 1 off.
PAGE 201/202
29-00-00 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

TOOL - ACCUMULATOR DRAIN
Usage To drain the hydraulic accumulators. To be used with p/n

28-0-1950-60.
Tool
consists of A. Adapter assembly 28-0-2199-01 1 off
B. Hose assembly 28-0-2199-13 1 off
C. Valve assembly 28-0-2199-16 1 off
Parts list Part A
1. Adapter 28-0-2199-03 1 off
2. Ring sealing 28-0-2199-04 1 off
Part C
3. Valve-needle 138-4SSP 1 off
4. Nut AN818-4C 1 off
5. Sleeve MS20819-4C 1 off
6. Tube 28-0-2199-06 1 off
Effectivity All.
Quantity 1 off.
Vendor code Part B : H3527
Part C-3: 86768.
PAGE 301
29-00-03 SEP 01/94
FOKKER 70/100
A member of
DeutscfteAerosoace

TEST SET - HYDRAULIC RESERVOIR
430mm
(15,74in)
F100-TEM-0111
Usage : To test the pressure of the hydraulic system reservoirs.

Effectivity : All.
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 302
29-00-03 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

HOSE - HYDRAULIC SYSTEM DRAIN
F100-TEM-0186
Usage To drain hydraulic system reservoirs 1 and 2 via the suction on

the ground service panel.
Tool
consists of 1. Plug-dust 014503-S9-20D 1 off
2. Coupling 014503-S5-20D 1 off
3. Reducer-tube end 20-12 TRTXSS 1 off
4. Hose assy 1SH-16-Q5-2000 1 off
Effectivity All.
Quanti ty 1 off.
Vendor code Item 1 and 2 : 16717
Item 3 : 26433
Item 4 : H3527
PAGE 401/402
29-00-04 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

ADAPTER - TORQUE
F100-TEM-0070
Usage : To torque hydraulic pump attachment bolts on engine.

Tool
consists of : A. Adapter-torque 28-0-1404D01 1 off
B. Adapter-drive R6965A 1 off
Effectivity : For aircraft with ABEX hydraulic pumps only.
Quantity 1 off.
Vendor code : Part B
code: D3059
PAGE 401
29-11-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TOOL - INSTALLATION
FIOO-TEM-0071
Usage To protect the 0-ring against damage from the serrated portion of
the hydraulic pump drive shaft during installation.
Effectivity All.
Quantity 1 off.
PAGE 402
29-11-01 SEP 01/94
FOKKER 70/100
Deutscfie Aeroswce

TEST SET - ACCUMULATOR
CD
Usage To perform a functional check of the hydraulic system 1 or 2 for

internal leakage.
Tool
consists of A. Case
B. Hose assy
Effectivity : All.
Weight and
packaging 1 case
Quantity 1 off.
PAGE 501/502
29-13-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

TEST BOX - HYDR INDICATOR
250mm
(9.84in)
F100-TEM-0336
Usage For repair and overhaul of the hydraulic indicator, type

EAHQP8519.
Tool
B. Cable assembly
Effactivity All.
Quantity 1 off.
PAGE 101/102
29-30-02 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

SPANNER - INSTALLATION
60mm
(2,36 in)
44mm
(1,73 in)
FIOO-TEM-0061
Usage : To remove and install hydraulic pressure switch.

Effectivity : All.
Quantity : 1 off.
PAGE 401/402
29-34-01 SEP 01/94
FOKKER 70/100
Amwnberof
Deutscne Aerospace
Part number : HTT165-760E2

CART - HYDRAULIC SYSTEM TEST
F100-TEM-0201
Usage : To pressurize the aircraft hydraulic system No. 1 and No. 2.

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE 501
29-36-00 SEP01W
FOKKER 70/100
Arnefnbcrof
Deutscne Aerospace
Part number : HTPC-P90E1SZ

CART - HYDRAULIC SYSTEM TEST
1400mm
(55,12in)
1175mm
(96,26'm)
Usage To pressurize the aircraft hydraulic system.

DOCUMENTATION.
Effactivity All.
Finish Painted yellow.
Quantity 1 off.
Vendor code H6394.
PAGE 502
29-36-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

SET - HYDRAULIC SYSTEM ADAPTER
1———I—————————
<T USE SKYOROl SOOBt ONLY
13
To check the hydraulic filter differential system.

Tool
6. Handpump 28-0-4037-03 1 off
C. Box 28-0-4037-50 1 off
Parts list : Part A
2. Ring, key FON2-9110-16 1 off
3. Cable FON8-0512 1 off
4. Cap AN929-6 1 off
5. Pin, drive MS21318-29 1 off
6. Plate, ident FON7-1309 1 off
8. Hose assy 28-0-4037-05 1 off
9. Cross, flared MS24403-6 1 off
10. Coupling AE99108G 1 off
11. Hose assy 28-0-4037-06 1 off
12. Dust cap 28-0-4037-21 1 off
13. Coupling AE99108J 1 off
14. Dust cap 28-0-4037-20 1 off
15. Connector 28-0-4037-10 1 off
16. Hose assy 28-0-4037-07 1 off
17. Nut 28-0-4037-27 1 off
18. Hose assy 28-0-4037-08 1 off
PAGE 501
29-37-00 SEP 01/94
FOKKER 70/100
DeutscheAerospace

SET - HYDRAULIC SYSTEM ADAPTER
19. Coupling AE91367E 1 off

20. Dust cap 3909-4 1 off
Effect!vity : All.
Weight and
packaging : 20 kg (44 Ibs), 1 Case.
Quantity : 1 off.
PAGE 502
29-37-00
FOKKER70/100
Part number : W05005

SET - MANIFOLD TEST ASSY, DIFFERENTIAL PRESSURE SWITCHES.
(TV06RUS-98SNL
'rdn-mwzo )ix
Usage To test the differential pressure switches,

Tool
consists of 1. Test manifold W05005-401 1 off
2. Test cable W05005-403 1 off
Parts list : Manifold
1. Plate W05005-001 1 off
2. 0-ring NAS1611-012 2 off
2. Flareless tube union MS21916D3-2 1 off
3. Nut AN818-2D 1 off
4. Cap AN929-L2 1 off
5. Nut AN315 1 off
6. Connector AE88493E 1 off
Test Cable
1. Plug TV06RW9-98SNL 1 off
2. Sleeve FoNl-3624 1 off
3. Wire FoN9-1780NK20 AR
4. Plug 930250-100 3 off
Effectivity : All .
Quantity : 1 off.
PAGE 801/802
29-37-00 NOV 01/09
FOKKER 70/100
oeutscne Aerospace

ADAPTER - TORQUE
20mm .,
(0-78in)r
142mm
(5-59in)
F100-TEM-0054
Usage To torque the hydraulic accumulator end cap.

Parts list 1. Clamp, top 28-0-2210-12 1 off
2. Clamp, bottom 28-0-2210-13 1 off
3. Bolt 28-0-2210-15 1 off
4. Nut 28-0-2210-14 1 off
5. Pin 28-0-2210-11 1 off
6. Packing 28-0-2210-05 2 off
Effectivity All.
Quantity 1 off.
PAGE 401/402
29-90-01 SEP 01/94
FOKKER70/100

E E
LEP 1/2 AUG 01/03 R

30-12-06 401 AUG 01/03 R
30-12-06 402 SEP 01/94
30-12-06 501 SEP 01/94
30-12-06 502 SEP 01/94
30-31-02 101 SEP 01/94
30-31-02 102 SEP 01/94
30-41-00 501 SEP 01/94
30-41-00 502 SEP 01/94
Page 1/2
FOKKER70/100
TABLE OF CONTENTS
28-0-0500F TEST SET - ANTI-ICING DUCT LEAKAGE 30-12-06 401

28-0-1327C ADAPTER - TORQUE 30-12-06 501
27-1-3983 TEST BOX - CURRENT SENSORS 30-31-02 101
27-1-4496 TEST BOX - TEMPERATURE CONTROL UNIT, 30-41-00 501
WINDSHIELD
30 CONTENTS
FOKKER70/100
Part number : 28-0-0500F

TEST SET - ANTI-ICING DUCT LEAKAGE
Usage To.perform a pressurizatlon and/or leakage test of the

anti-icing ducts.
Tool consists of:
A. Adaptor assy
B. Hose assy
C. Hose assy
D. Tube assy
E. Gauge
F. Valve
G. Cap
H. Plate
I. Connector
J. Ring
K. Tee
L. Wooden box
Part list : FOR PARTS AND MAINTENANCE INFORMATION, REFER TO THE GROUND
Effectivity : All .
Weight and
packaging 1 wooden box.
Quantity 1 off.
PAGE 401/402
30-12-06 AUG 01/03
FOKKER 70/100
A member of
OeutscheAerosoace

ADAPTER - TORQUE
17mm
(0,67in)
65mm
(2,56in)
81,7mm
(3,21in)
F100-TEM-0113
Usage To apply torque to the anti-icing duct swivel connectors in the

horizontal stabilizer.
Effectivity All.
Quanti ty 1 off.
PAGE 501/502
30-12-06 SEP 01/94
FOKKER 70/100
Amwnbcr of
Deutsche Aerosoace

TEST BOX - CURRENT SENSORS
170mm
(6.9in)
279mm'
(11.0 in) 175mm
{7,0 i n )
F100-TEM-0337
Usage For repair and overhaul of the current sensors, type EAAACS7610,
EAACS7910, EAACS8501 and EADCS8604.
Tool
B. Cable assembly
Effactivity All.
Quanti ty 1 off.
PAGE 101/102
30-31-02 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

TEST BOX - TEMPERATURE CONTROL UNIT, WINDSHIELD
F50-TEM-0354
Usage For test, repair and overhaul of the windshield temperature

control unit, type EAWTC8803.
Tool
B. Cable assembly
Effectivity : All.
Quantity : 1 off.
PAGE 501/502
30-41 -00 SEP 01/94
FOKKER70/100

E E
LEP 1/2 AUG 01/03 R

31-31-00 501 AUG 01/99
31-31-00 502 AUG 01/99
31-31-05 401 SEP 01/94
31-31-05 402 SEP 01/94
31-41-00 501 AUG 01/03 R
31-41-00 502 AUG 01/03 N
31-51-00 501 SEP 01/94
31-51-00 502 SEP 01/94
31-90-01 201 SEP 01/94
31-90-01 202 SEP 01/94
31-90-02 501 SEP 01/94
31-90-02 502 SEP 01/94
31-90-04 501 MAR 01/95
31-90-04 502 MAR 01/95
Page 1/2
FOKKER70/100
TABLE OF CONTENTS
964-0446-001 TEST SET - FLIGHT DATA RECORDER 31-31-00 501

PL1 TEST BOX - LOCATOR BEACON 31-31-05 401
28-0-4733 SET - TARGET AND ANTI-TARGET. PROXIMITY 31-41-00 501
SENSING SYSTEM
38-808-01 BOX - BREAKOUT, PROXIMITY SENSING SYSTEM 31-41-00 502
28-0-4205 TEST BOX - INTERFACES, FLIGHT WARNING 31-51-00 501
COMPUTER
28-0-4419 TEST BOX - INTERFACES, FLIGHT WARNING 31-51-00 502
COMPUTER
810-546 CLAMP - VICE, LOCATOR BEACON BATTERY 31-90-01 201
810-325 SPANNER - INSTALLATION, LOCATOR BEACON 31-90-01 202
BATTERY END COVER
N30A5A LOCATOR/RECEIVER - LOCATION BEACON 31-90-02 501
28-0-4549B SET - DUMMY SENSORS, PROXIMITY SENSING 31-90-04 501
SYSTEM
31 CONTENTS
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : PL1

TEST BOX - LOCATOR BEACON
152 Amm
(6,0 i n )
38,1mm
(1,5 in)
F50-TEM- 0230a
Usage To perform an operational test on a locator beacon without

removing the unit from the aircraft.
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
31-31-05 SEP 01/94
FOKKER70/100
Part number : 964-0446-001

58 mm
(2,3 in)
119mm
(4,7 in)
(9,9 in)
Usage : To do a functional test of the Mandatory Parameter Aquisition.

Parts list : Download unit
PCMCIA Cartridge
Cable
FOR PARTS AND MAINTENANCE INFORMATION, REFER TO THE VENDOR
DOCUMENTATION.
Effectivity : Aircraft equipped with Sundstrand's Sol id-State Flight Data
Recorder Product Family.
Weight and
packaging : 2,25 kg (5 Ibs), 1 case.
Quantity : 1 off.
PAGE 501/502
31-31-00 AUG 01/99
FOKKER70/100

SET - TARGET AND ANTI-TARGET, PROXIMITY SENSING SYSTEM
Usage To simulate a "target near" or a "target far" situation for the

sensors of the proximity sensing system.
Tool consist of:
A. Anti-target 28-0-4733-01 4 off
B. Anti-target 28-0-4733-06 2 off
C. Target 28-0-4733-14 2 off
D. Target 28-0-4733-08 4 off
E. Case 28-0-4733-37 1 off
Effectivity : All.
Weight and
packaging 1 case,
Quantity 1 off.
PAGE 501
31-41-00 AUG 01/03
FOKKER70/100
ILLUSTRATEDTOOLANDEQUIPMENTMANUAL
Part number: 38-808-01

BREAKOUT BOX, PROXIMITY SENSING SYSTEM
3|§Sfc P/N 38-808-01 F - I O O PROXIMITY SENSOR TYPICAL SENSOR
K|H| S/N BREAK OUT BDX X . 4.8i*H
RIGGING RANGE: 5 . 2 - 6 . 2 m H
, 2 METER: B4K MODEL 878 (1KHz]
£ —© A///,
LIGHT
S 12-20 O-fce
20
™ ^/r /s^ 1
^^\-^ 6
_ C_^ 19 ft — 7 MODE
r i "^ 18 ~i J7^- a
17 ^%* s ^ X N 9
A A
//7
16 / / Re*1 iMn
j—— @ 15 ,^
13 ' 2 1 '
r-l ! I—,
POSITION 1 POSITION 2i
sw
SENSOR MNEMONIC POS SENSOR MNEMONIC
01 FLDOLI 17 NPROL
02 FLUPLI 2 18 NBUOL
03 FLUPPI J 19 MLGUPL
04 FLUPP2 4 20 MLGUPR
1 Q5 GRNDL • = 2i MCLOL"
1 06 GRNDL 3 6 22 MCLOL2
I 07 GRNOR2 1 23 UCLORI
! OB GRNOR3 E 2* MCLOR2
i Qs LDINL» S 25 NUCtOi *
u
1! 0 LOINL2 I0 26 NLCL02
» LDINL3 2 ^ GRNDl •
i 2 LDINRI 2 28 GPNOL3
LOINR? 3 29 ORNCR2
4 LOINR3 4 30 QRNOR3
5 LOOUTL 5 3' rauPOl
6 LDOUTR 6 32 RLOOL
>^~"v i 33 RUPOR ^._
/^v 8 3* W^CO» /^^
[i^y 9 3b HOPLL \5^
20 36 ROP5.R
ri*\
S?
CRANE|! L ,
i? MMIDIM' V C*MM CO
—,
Usage : To test the proximity sensors.

DOCUMENTATION.
Effactivity : All .
Weight and
packaging 1 box.
Quantity 1 off.
Vendor code 08748.
PAGE 502
31-41-00 AUG 01/03
FOKKER 70/100
Deutscfie Aerospace

TEST BOX - INTERFACES, FLIGHT WARNING COMPUTER
65mm
(2,56in)
320mm
215mm {12,59in)
(8,46 in)
F100-TEM-0338
Usage : To test the contacts of the connection between the flight warning
computer and the aircraft connectors after installation of the
flight warning computer.
Tool
B. Case
Effectivity : A/C with s/n 244 thru 275, 279, 284 thru 285, 287 thru 288, 290,
292, 294, 296 and 298.
Quantity : 1 off.
PAGE 501
-00 SEP 01/94
FOKKER 70/100
Arnefrtber of
Deutscfte Aerososce

TEST BOX - INTERFACE, FLIGHT WARNING COMPUTER
S
f 60mm
1 l(2,36in)
200mm
360mm
(7.87in)
(K.17in)
F100-TEM-03390
Usage To test the contacts of the connection between the flight warning
computer and the aircraft connectors after installation of the
flight warning computer.
Tool
B. Case
Effectivity : A/C with s/n 276, 278, 280 thru 283, 286, 289, 291, 293, 295, 297,
299 and up.
Quanti ty : 1 off.
PAGE 502
-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

CLAMP - VICE
50mm
(1.96in)
F100-TEM-0055
Usage : To clamp the locator beacon. To be used with p/n 810-325.

Effectivity : All.
Quantity : 1 off.
PAGE 201
31-90-01 SEP aim
FOKKER 70/100
Deutsche Aerospace

SPANNER - INSTALLATION
5mm
(0,19in)
25mm
(0.98in)
F100-TEM-0056
Usage : To remove the battery end cover. To be used with p/n 810-546.
Effectivity : All.
Quantity : 1 off.
PAGE 202
31-90-01 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
Part number : N30A5A

LOCATOR/RECEIVER - LOCATION BEACON
F50-TEM-0089b
Usage : To detect and locate an underwater sound source emitting a signal

in the 30-45 khz range.
Parts list : FOR PARTS AND MAINTENANCE INFORMATION REFER TO VENDOR
DOCUMENTATION.
Effectivity : All.
Weight and
packaging : 8.16 kg (18 Ib), 1 off.
PAGE 501/502
31-90-02 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SET - DUMMY SENSORS, PROXIMITY SENSING SYSTEM
80mm
(3.1 in)
350mm
(13,8 in)
F100-TEM-0380
Usage : To adjust the brackets of the sensors and targets of the proximity
sensing system
Tool
consists of : A. Gauge 28-0-4549-04 1 off
B. Adapter 28-0-4549-16 1 off
C. Sensor - dummy 28-0-4549-30 1 off
D. Sensor - dummy 28-0-4549-31 1 off
E. Case 28-0-4549-12 1 off
| Effectivity : Aircraft equipped with the proximity sensing system only.
Weight and
packaging 1 Case.
Quantity 1 off.
Supplementary data:
Aircraft equipped with Menasco main landing gear, use tool no: 28-0-5328.
(down lock sensor only) Ref. 32-61-01 page 502.
PAGE 501/502
31-90-04 MAR 01/95
FOKKER70/100

E E
LEP 1 NOV 01/09 R 32-11-08 412 MAR 01/95

LEP 2 NOV 01/09 R 32-12-01 401 SEP 01/94
CONTENTS 1 NOV 01/09 R 32-12-01 402 SEP 01/94
CONTENTS 2 NOV 01/09 R 32-21-01 401 SEP 01/94
32-11-00 601 SEP 01/94 32-21-01 402 MAR 01/95
32-11-00 602 SEP 01/94 32-21-01 403 SEP 01/94
32-11-01 401 SEP 01/94 32-21-01 404 SEP 01/94
32-11-01 402 SEP 01/94 32-21-01 501 SEP 01/94
32-11-01 403 MAR 01/95 32-21-01 502 SEP 01/94
32-11-01 404 MAR 01/95 32-21-01 503 SEP 01/94
32-11-01 405 SEP 01/94 32-21-01 504 SEP 01/94
32-11-01 406 SEP 01/94 32-21-06 401 SEP 01/94
32-11-01 407 SEP 01/94 32-21-06 402 SEP 01/94
32-11-01 408 SEP 01/94 32-21-06 403 SEP 01/94
32-11-01 409 SEP 01/94 32-21-06 404 SEP 01/94
32-11-01 410 SEP 01/94 32-21-06 405 SEP 01/94
32-11-01 411 SEP 01/94 32-21-06 406 SEP 01/94
32-11-01 412 SEP 01/94 32-21-08 401 SEP 01/94
32-11-01 413 SEP 01/94 32-21-08 402 SEP 01/94
32-11-01 414 SEP 01/94 32-21-08 403 NOV 01/09 R
32-11-01 601 SEP 01/94 32-21-08 404 NOV 01/09 R
32-11-01 602 SEP 01/94 32-22-00 401 SEP 01/94
32-11-01 603 SEP 01/94 32-22-00 402 SEP 01/94
32-11-01 604 SEP 01/94 32-22-00 501 SEP 01/94
32-11-02 401 SEP 01/94 32-22-00 502 SEP 01/94
32-11-02 402 SEP 01/94 32-31-03 401 SEP 01/94
32-11-04 401 SEP 01/94 32-31-03 402 SEP 01/94
32-11-04 402 SEP 01/94 32-31-04 401 SEP 01/94
32-11-04 403 NOV 01/09 N 32-31-04 402 SEP 01/94
32-11-04 404 NOV 01/09 N 32-31-04 403 SEP 01/94
32-11-05 401 MAR 01/95 32-31-04 404 SEP 01/94
32-11-05 402 MAR 01/95 32-32-02 401 MAR 01/95
32-11-08 401 SEP 01/94 32-32-02 402 MAR 01/95
32-11-08 402 SEP 01/94 32-32-09 501 SEP 01/94
32-11-08 403 SEP 01/94 32-32-09 502 SEP 01/94
32-11-08 404 SEP 01/94 32-33-00 501 SEP 01/94
32-11-08 405 AUG 01/98 32-33-00 502 SEP 01/94
32-11-08 406 SEP 01/94 32-42-01 601 SEP 01/94
32-11-08 407 SEP 01/94 32-42-01 602 SEP 01/94
32-11-08 408 SEP 01/94 32-43-00 501 SEP 01/94
32-11-08 409 SEP 01/94 32-43-00 502 SEP 01/94
32-11-08 410 MAR 01/95 32.-43-00 503 SEP 01/94
32-11-08 411 MAR 01/95 32-43-00 504 SEP 01/94
Page 1
FOKKER70/100

E E
32-44-00 501 SEP 01/94

32-44-00 502 SEP 01/94
32-45-02 403 SEP 01/94
32-45-02 404 SEP 01/94
32-48-00 301 SEP 01/94
32-48-00 302 SEP 01/94
32-48-00 501 SEP 01/94
32-48-00 502 SEP 01/94
32-52-00 501 SEP 01/94
32-52-00 502 SEP 01/94
32-52-00 503 SEP 01/94
32-52-00 504 SEP 01/94
32-61-01 501 AUG 01/99
32-61-01 502 MAR 01/95
32-63-01 501 MAR 01/95
32-63-01 502 MAR 01/95
32-90-03 401 SEP 01/94
32-90-03 402 SEP 01/94
32-90-03 403 SEP 01/94
32-90-03 404 SEP 01/94
32-90-05 201 SEP 01/94
32-90-05 202 SEP 01/94
32-90-05 203 SEP 01/94
32-90-05 204 SEP 01/94
Page 2
FOKKER70/100
TABLE OF CONTENTS
28-0-2038B KIT - SERVICING, LANDING GEAR STRUTS 32-11-00 601

28-0-2327D PULLER - MAIN GEAR HINGE PIN 32-11-01 401
28-0-2336 TOOL - BRACKET ADJUSTMENT, MAIN GEAR UPPER 32-11-01 402
SWIVEL
460002469 PIN - ADJUSTMENT, MAIN GEAR TOGGLE LINK 32-11-01 403
28-0-1381E ADAPTER - MAIN WHEEL AXLE NUT TORQUE 32-11-01 404
28-0-1463E DOLLY - LANDING GEAR 32-11-01 405
28-0-3795 PULLER - WHEELSPEED SENSOR 32-11-01 409
28-0-1881B SPANNER - MICROSWITCH 32-11-01 410
P1908 SOCKET - MAIN WHEEL AXLE NUT TORQUE 32-11-01 411
28-0-5217 SLEEVE - PROTECTION, MLG WHEEL AXLE 32-11-01 412
28-0-5260 DOLLY - LANDING GEAR 32-11-01 413
28-0-4142 FIXTURE - BRAKE DISC ALIGNMENT 32-11-01 602
28-0-1374 PULLER - ATTACHMENT PIN, MAIN GEAR SIDE 32-11-02 401
STAY
460002674 FILL UNIT - SEALANT,MAIN LANDING GEAR 32-11-04 401
460002675 EXTRACTOR - PIN, TORQUE LINK HINGE PIN 32-11-04 402
460002264 TOOL - DRIFT 32-11-04 403
460004330-86 TOOL - PRESS 32-11-04 404
28-0-2323B ADAPTER - UPSTOP DAMPER TORQUE, MAIN GEAR 32-11-05 401
A88309JR CART - STRUT SERVICING, LANDING GEAR 32-11-08 401
460002262 SPANNER - MAIN GEAR GLAND NUT 32-11-08 402
460002270 PULLER - PIN, MAIN GEAR STOP RINGS AND 32-11-08 403
GLAND NUT
460002293 SLEEVE - SLIDING MEMBER ASSEMBLY 32-11-08 404
460002678 TOOL - ASSEMBLY, MAIN GEAR SLIDING MEMBER 32-11-08 405
SEALS
460004964 TOOL - BACKING, RING ASSEMBLY 32-11-08 406
460006181 TOOL - GAPPING, ANTI-EXTRUSION RING 32-11-08 407
460006183 TOOL - GUIDE STOP RING ASSEMBLY 32-11-08 408
460006196 SLEEVE - ASSEMBLY, MAIN GEAR SLIDING MEMBER 32-11-08 409
SEALS
AT24437 ADAPTER - GLAND NUT SEAL 32-11-08 410
AT24882 TOOL - INSTALLATION, SCRAPER AND SEAL 32-11-08 411
28-0-1882B SET - SPANNER 32-12-01 401
28-0-1421H LEVER - PLUNGER UNLOCKING, NOSE GEAR 32-21-01 401
DOWNLOCK
28-0-1380F ADAPTER - NOSE WHEEL AXLE NUT TORQUE 32-21-01 402
460002348 PAD - PRESSURE, NOSE GEAR SLIDING MEMBER 32-21-01 403
BUSHES
ST2170 PULLER - PRESSURE, NOSE GEAR SLIDING MEMBER 32-21-01 404
BUSHES
460001682-75 TUBE SPANNER - RETAINING NUT, NOSE GEAR LEG 32-21-01 502
460002249 SPANNER - GLAND NUT, NOSE GEAR LEG 32-21-06 401
460002445 EXTRACTOR - BEARING, NOSE GEAR LEG 32-21-06 402
460002518 ASSEMBLY TOOL - DOWEL, NOSE GEAR LEG 32-21-06 403
460002288 SPANNER - STOP SLEEVE, NOSE GEAR LEG 32-21-06 404
ST2075-44 C-SPANNER - NOSE GEAR LEG 32-21-06 405
s
32 CONTENTS "O Page 1
NOV 01/09
FOKKER70/100
TABLE OF CONTENTS

460002669 SLEEVE - ASSEMBLY, NOSE GEAR GLAND NUT AND 32-21-06 406
SEALS
460004963 SLEEVE - SLIDING MEMBER ASSEMBLY, NOSE GEAR 32-21-08 401
460002344 SLEEVE - SLIDING MEMBER ASSEMBLY, NOSE GEAR 32-21-08 402
460006201 ADAPTER - TURNING TUBE CAP NUT 32-21-08 403
460006203 ADAPTER - TURNING TUBE CAP NUT 32-21-08 404
28-0-2490A TOOL - ACTUATOR ADJUSTMENT 32-22-00 401
28-0-1618E CART - HYDRAULIC TEST 32-22-00 501
28-0-2151B TOOL - SELECTOR VALVE ADJUSTMENT, LANDING 32-31-03 401
GEAR
28-0-1806G ADAPTER - TORQUE, MG DOOR UPLOCK NUTS 32-31-04 401
28-0-1455F TOOL - ADJUSTMENT, MAIN GEAR ALT EXT CTRL 32-31-04 402
SYSTEM
28-0-2158B TOOL - DUMP VALVE ADJUSTMENT 32-32-02 401
28-0-1859B LOCK - SAFETY, MAIN GEAR INBOARD DOORS 32-32-09 501
28-0-4378 SET - RIGGING PIN, LANDING GEAR ALT 32-33-00 501
EXTENSION CONTROL SYSTEM
5E88-511 GAUGE - CHECKING, BRAKE DISC DRIVE CHANNELS 32-42-01 601
28-0-3960 SET - RIGGING PIN, NORMAL BRAKE CONTROL 32-43-00 502
SYSTEM
28-0-1837G TEST SET - BRAKE BLEEDING AND TEST 32-44-00 501
28-0-5255 ADAPTER - LOCKNUT TORQUE, WHEELSPEED SENSOR 32-45-02 403
28-0-4907 CONTRLLR - SHUT OFF- AND SERVO VALVE, 32-48-00 301
AUTOMATIC BRAKE SYSTEM
28-0-4249 TEST BOX - CONTROL UNIT, AUTOMATIC BRAKE 32-48-00 501
28-0-4113 KIT - RIGGING, NOSE WHEEL STEERING SYSTEM 32-52-00 502
28-0-2067B TOOL - SWITCH ADJUSTMENT, NOSE GEAR 32-61-01 501
DOWNLOCK
28-0-5328 DUMMY - SENSOR, MENASCO MLG DOWN LOCK 32-61-01 502
28-0-4760 TOOL - ADJUSTMENT, GROUND FLIGHT SWITCH 32-63-01 501
28-0-4683 EXTRACTOR - HINGE PINS MLG, TORQUE LINKS 32-90-03 402
28-0-4834 HOSE - FILL AND BLEED, SHIMMY DAMPER TORQUE 32-90-05 202
LINK
Page 2
32 CONTENTS NOV 01/09
FOKKER 70/100
A member of
Deutscne Aerospace

KIT - SERVICING
F100-TEM-0156
Usage : To service the main and nose landing gear struts with hydraulic
fluid and or nitrogen. To be used with p/n A88309JR and p/n
28-0-1614.
Tool
consists of : A. Set-charging
B. Set-inflation
C. Case
D. Metal box
Effectivity : All.
Weight and
packaging 7.4 kg (16,3 Ib), 1 metal box and 1 case.
Quantity 1 off.
PAGE 601/602
32-11 -00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

PULLER - MAIN GEAR HINGE PIN
F100-TEM-0116
Usage To remove the main gear hinge pins.

Tool
consists of A. Bush 28-0-2327-01 1 off
B. Bush 28-0-2327-02 1 off
C. Bearing 51109 1 off
D. Nut 28-0-2327-05 1 off
E. Bar 28-0-2327-06 1 off
F. Bolt-dummy 28-0-2327-08 1 off
G. Case 28-0-2327-09 1 off
Effectivity : All.
Weight and
packaging : 1 case.
Quantity : 1 off.
Vendor code : Part C
code: H7009.
PAGE 401
32-11-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

TOOL - BRACKET ADJUSTMENT
50mm
(1.96in)
F100-TEM-0117
Usage To align the axis of the upper swivel joint with that of the main
gear hinge pins.
Tool
consists of A. Bush 28-0-2336-07 1 off
B. Tool 28-0-2336-08 1 off
Parst lists Part A
1. Ring MS16624-1037 1 off
2. Body 28-0-2336-03 1 off
3. Piece-end 28-0-2336-02 1 off
Part B
1. Ring MS16624-1037 1 off
2. Body 28-0-2336-03 1 off
3. Nut 28-0-2336-06 1 off
4. Screw 28-0-2336-05 1 off
Effectivity Dowty landing gear only.
Quanti ty 1 off.
PAGE 402
32-11-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

PIN - ADJUSTMENT
F100-TEM-0123
Usage : To lock the main gear toggle links during adjustment of the
overcenter and overtravel stops of the toggle links.
Adjustment of the down-lock microswitches or sensors.
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE 403
32-11-01 MAR 01/95
FOKKER 70/100
Amcmberof
Deutsche Aerospace
| Part number : 28-0-1381E

ADAPTER - MAIN WHEEL AXLE NUT TORQUE
19mm
(0.74m)
99mm
(3.90 in)
Usage : To remove/install and torque the main wheel axle nuts,

| Effectivity : Aircraft with Dowty main landing gear only.
Quantity : 1 off.
Supplementary data :
Part nr: 28-0-1381C and 28-0-1381D are fully interchangeable.
Part nr: 28-0-1381E introduced due to new production methods,
PAGE 404
32-11-01 MAR 01/95
FOKKER 70/100
Deutsche Aerospace
Part number : 28-0-1463E (superseded by 28-0-5260)

DOLLY - LANDING GEAR
DIMENSIONS TBD
F100-TEM-0202
PAGE 405
32-11-01 SEP 01/94
FOKKER 70/100
A member of
OeutscneAerosoace
Part number : 28-0-1463E Cont'd (superseded by 28-0-5260)

Usage To lift and fix the main or nose gear in position during removal
or installation.
Tool
consists of A. Dolly 1 off
B. Clamping fixture 1 off
(MLG)
C. Clamping fixture 28-0-1463-11 1 off
(NLG)
Parts list Part A
1. Frame 28-0-1463-01 1 off
2. Support 28-0-1463-02 1 off
3. Bolt FON8-1114M12x40 18 off
4. Nut FON8-1201ml2 23 off
5. Ring MS35338-48 27 off
6. Bracket 28-0-1463-03 1 off
7. Ring FON8-1302-20 2 off
8. Pin MS24665-444 3 off
9. Pin 28-0-1463-90 2 off
10. Beam 28-0-1463-04 1 off
11. Washer 28-0-1463-129 2 off
12. Rod 28-0-1463-89 2 off
13. Wrench 28-0-1463-99 2 off
14. Spacer 28-0-1463-91 2 off
15. Bolt FON8-1114M8X30 6 off
16. Pivot 28-0-1463-08 2 off
17. Retainer 28-0-1463-93 4 off
18. Retainer 28-0-1463-92 2 off
20. Bolt FON8-1114M10x30 10 off
21. Jack 28-0-1463-100 2 off
22. Washer FON8-1300-11 2 off
23. Ring FON8-1300-26 off
24. Pin 28-0-1463-97 off
25. Bracket 28-0-1463-05 off
26. Pin assembly, 28-0-1463-141 4 off
threaded
27. Wheel, castor 28-0-1463-126 3 off
28. Bolt FON8-1114M12x40 12 off
29. Nut FON8-1202M12 12 off
30. Ring MS35338-48 12 off
Part B
1. Fixture, clamping 28-0-1463-06 1 off
2. Clamp 28-0-1463-07 1 off
3. Pin assembly 28-0-1463-09 2 off
PAGE 406
32-11-01 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

23
F100-TEM-0204
PAGE 407
SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

Part C
1. Pin assembly 28-0-1463-10 2 off
2. Fixture, clamping 28-0-1463-108 1 off
3. Clamp 28-0-1463-107 1 off
4. Bolt DIN601-M12xl20 1 off
5. Nut FON8-1201M12 1 off
6. Ring MS35338-48 1 off
Effectivity : All.
Finish : The dolly is colored yellow.
Quantity : 1 off.
Krtbt
PAGEHUO
-M n-t
- I I-Ul
408
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

PULLER - WHEELSPEED SENSOR
VIEW A FiOO-TEM-0187o
Usage To facilitate the installation and/or removal of the wheel speed

sensor.
Parts list 1. Ring-retaining, MS166224-1034 2 off
external
2. Bar-threaded 28-0-3795-03 2 off
3. Plate 28-0-3795-05 1 off
4. Wooden box 28-0-3795-10 1 off
Effectivity : All.
Weight and
Quanti ty : 1 off.
PAGE 409
SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerosoace

SPANNER - MICROSWICTH
34mm
(1,34in)
O
100mm
(3,94 in)
2,5mm
(0,10 in)
F100-TEM-0320a
Usage To adjust the microswitches.

Effactivity All.
Finish The spanner is colored black.
Quanti ty 1 off.
PAGE 410
32-11-01 SEP 01/94
FOKKER 70/100
Deutscne Aerospace
Part number : P1908

SOCKET - MAIN WHEEL AXLE NUT TORQUE
81 mm
(3.25 in)
Usage To remove or install the main wheel axle nuts,

Effectivity For aircraft with Menasco landing gear only.
Quantity 1 off.
Vendor code 1CV05.
1u m PAGE 411
- I I -U I SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

SLEEVE - PROTECTION, MLG WHEEL AXLE
72 mm
(2,9 in)
VIEW A F100-TEM-B2004
Usage : To protect the MLG axle thread against damage during wheel change,
Effectivity : For aircraft with Menasco landing gear only.
Quantity : 1 off.
PAGE 412
32-11-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

F100-TEM-32011
PAGE 413
1 1 fH
- I I-U I SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

Usage To lift and fix the main or nose gear in position during removal
or installation.
Tool
consists of A. Dolly 1 off
B. Clamping fixture 28-0-5260-02 1 off
(MLG) (Dowty-MLG)
28-0-5260-03 1 off
(Menasco-MLG)
C. Clamping fixture 28-0-5260-05 1 off
(NLG)
Parts list Part A
1. Frame 28-0-5260-10 1 off
2. Support 28-0-5260-11 1 off
3. Bolt DIN933 M12x40 11 off
4. Nut DIN982-8 M12 7 off
5. Ring DIN125 M12 18 off
6. Ring 28-0-5260-147 5 off
7. Pin-cotter DIN94 4x40 5 off
8. Pin 28-0-5260-142 2 off
9. Beam 28-0-5260-12 1 off
10. Washer 28-0-5260-146 2 off
11. Rod 28-0-5260-148 2 off
12. Wrench 28-0-5260-174 2 off
13. Spacer 28-0-5260-145 2 off
14. Bolt 28-0-5260-165 2 off
15. Pivot 28-0-5260-118 2 off
16. Pin 28-0-5260-143 1 off
17. Pin 28-0-5260-141 1 off
18. Screw 28-0-5260-134 4 off
19. Retainer 28-0-5260-140 4 off
20. Bolt DIN933 M8x25 8 off
21. Bracket 28-0-5260-13 1 off
Effectivity All.
Finish The dolly is colored yellow.
Quantity 1 off.
PAGE 414
32-11-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
PAGE 601
32-11-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

FIXTURE - BRAKE DISC ALIGNMENT
.14
315mm
(12,4in)
380 mm F100-TEM-01883
(14,9 in)
Usage To align the rotating discs of the brake unit prior to

installation of the wheel and tire assembly.
Parts list 1. Bolt hex sock hd 28-0-4142-12 3 off
2. Bolt hex sock hd 28-0-4142-11 3 off
3. Ring 28-0-4142-03 1 off
4. Piece 28-0-4142-04 1 off
5. Bolt M6V25 28-0-4142-10 6 off
6. Nut TBD 6 off
7. Washer TBD 6 off
8. Bracket 28-0-4142-02 3 off
9. Pin-dowel DIN6325M6-6xl6 6 off
10. Pin-dowel DIN6325M6-6x36 3 off
11. Screw 28-0-4142-15 4 off
12. Nut 28-0-4142-13 4 off
13. Washer 28-0-4142-14 4 off
14. Handle FON7-2302 2 off
15. Plate-name FON7-1317A 1 off
16. Plate 28-0-4142-01 1 off
17. Box (wood) 28-0-4142-20 1 off
Effectivity : All.
Finish Painted with Skydrol resistant paint.
PAGE 602
32-11-01 SEP 01/94
FOKKER 70/100
DeutscneAerosoace

FIXTURE - BRAKE DISC ALIGNMENT
Weight and
packaging : 21 kg (46,2 lb), 1 wooden box.
Quantity : 1 off.
4 H rH PAGE
KMbt 603/604
°u-5/DU
*
- I 1-U I SEP 01/94
FOKKER 70/100
A member of
Deurscne Aerospace

PULLER - ATTACHMENT PIN, MAIN GEAR SIDE STAY
190mm
(7,48 in)
85mm
(3,34in)
F100-TEM-0124
Usage To remove the main gear side stay attachment pin from the side
stay bracket.
Parts list 1. Nut 28-0-1374-04 1 off
2. Washer 28-0-1374-05 1 off
3. Bush assy 28-0-1374-07 1 off
4. Spindle 28-0-1374-01 1 off
Effectivity All.
Quanti ty 1 off.
PAGE 401/402
32-11-02 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

FILL UNIT - SEALANT, MAIN LANDING GEAR
22mm
88m)
VIEW A
Usage : To fill the cavity between the bushes and the upper torque link
pin with sealing compound (Main landing gear).
Effectivity : Aircraft fitted with Dowty Aerospace main landing gears,
Finish Black oxide.
Quanti ty 1 off.
PAGE 401
32-11-04 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

EXTRACTOR - PIN, TORQUE LINK HINGE PIN
152mm
(6-Oin)
F1002360K
Usage To remove the pin from the torque link hinge pin on the main
landing gear.
Effectivity : Aircraft fitted with Dowty Aerospace main landing gears.
Finish : Black oxide.
Quantity : 1 off.
PAGE 402
-04 SEP 01/94
FOKKER70/100

TOOL - DRIFT
SHIM
SHIM
UPPER TORQUE
UHK
VIEW A
LOWER TDR90E
LINK
SHIM SHIM
Usage To remove bushes on the Main Landing Gear Torque Links.

Effactivity All .
Finish Black oxide.
Quantity 1 off.
Vendor K0654
PAGE 403
32-11-04 NOV 01/09
FOKKER 70/100
Part number : 460004330-86

TOOL - PRESS
SHOT
BUSH
TORQUE
VIEW A
LOWER TORQUE
UNK
SHiM
8USH
Usage To install bushes on the Main Landing Gear Torque Links,

Effectivity All.
Finish Black oxide.
Quantity 1 off.
Vendor K0654
PAGE 404
32-11-04 NOV 01/09
FOKKER 70/100
Amemberof
Deutsche Aerospace

ADAPTER - UPSTOP DAMPER TORQUE
80mm
(3,15 in)
F100-TEM-0072
Usage : To remove or install the upstop damper or upstop assembly of the

main gear.
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
32-11 -05 MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : A88309JR

CART - STRUT SERVICING, LANDING GEAR
F100-TEM-0342
Usage : To fill the MLG/NLG struts.

DOCUMENTATION.
Effectivity : All.
Weight and
Quantity 1 off.
Vendor code H4464.
PAGE 401
-I H HQ
-| 1-UO SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

SPANNER - MAIN GEAR GLAND NUT
{48mm
I C1-9ifi)
USrnm 90mm
(17.6in) (36in)
MAIN FITTING (REF)
BEARING NUT
SUB-ASSEMBLY (REF)
460002262
SPANNER
SLIDING
MEMBER (REF)
FIOQ2381K
Usage : To remove/install the bearing nut sub-assembly.

Quantity : 1 off.
PAGE 402
32-11 -08 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

PULLER - PIN, MAIN GEAR STOP RINGS AND GLAND NUT
73mm
C29in)
26mm
(Min)
460002270
EXTRACTOR
MAIN FITTING
(REF)
PART SECTION AT A
F1002362K
Usage To remove the pins in the undercarriage main fitting.

Parts list 1. 460002270-1 Bolt 1 off
2. 460002270-2 Hexagonal nut 1 off
3. 460002270-3 Sleeve 1 off
Effactivity : Aircraft fitted with Dowty Aerospace main landing gears.
Quanti ty 1 off.
PAGE 403
no H -I HQ
G£-l I-UO SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

SLEEVE - SLIDING MEMBER ASSEMBLY
152mm
(6-0«n)
460002293 460004964
ASSEMBLY SLEEVE ASSEMBLY TOOL
SEAL AND
BACKING RING (REF)
MAIN FITTING (REF)
^^—-—SLIDING MEMBER (REF)
F1002364K
Usage : To install the composite sealing ring and the backing ring.
Finish : Anodise.
Quantity : 1 off.
PAGE 404
32-11-08 SEP 01/94
FOKKER 70/100

TOOL - ASSEMBLY, MAIN GEAR SLIDING MEMBER SEALS
105mm
460002678
SEAL ASSEMBLY
TOOL
460002678
156 mm
(6-2 h)
BEARNG NUT
SUB-ASSEMBLY (RET.)
ASSEMBLY SLEEVE
SLDNG MEMBER
FIOQ2365K
Usage : To install the spacer and the wiper ring.
Parts list 1. 460002678-1 Guide 1 off
2. 460002678-2 Guide 1 off
3. 460002678-3 Pusher 1 off
4. 460002678-4 Location spigot 1 off
5. 460002678-5 Capscrew 4 off
6. 460002678-6 Capscrew 4 off
Finish Black oxide items 2 and 4
Anodise items 1 and 3.
Quantity 1 off.
Vendor code K0654.
PAGE 405
32-11-08 AUG 01/98
FOKKER 70/100

TOOL - BACKING, RING ASSEMBLY
152 mm
(6-Oin)
460002293 460004964
ASSEMBLY SLEEVE ASSEMBLY TOOL
EAl AND
BACKING RING(REF)
MAW FITTING (REF)
SLIDING MEMBER (REF)
F10Q2364K
Usage To assemble the composite sealing ring sub-assembly and the

backing ring.
Effactivity Aircraft fitted with Dowty Aerospace main landing gears.
Finish Anodise.
Quantity 1 off.
Vendor code K0654.
PAGE 406
HQ
~UO SEP 01/94
FOKKER 70/100
Deutscne Aerospace

TOOL - GAPPING, ANTI-EXTRUSION RING
460006181
GAPPNC RMG
13mm
(0-5h)
F1002366K
Usage : To set the gap in the anti-extrusion ring.

Effectivity : Aircraft fitted with Dowty Aerospace main landing gears,
Quantity : 1 off.
PAGE 407
32-11-08 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

TOOL - GUIDE STOP RING ASSEMBLY
TOP RING (REF)
460006183
ASSEMBLY TOOL
US mm
(S.7in)
MAIN FITTING
<REF)
SLIDING MEMBER
(REF)
F10Q2367K
Usage : To guide the stop ring into the main fitting.

Parts list 1. 460006183-1 Split sleeve 1 off
2. 460006183-2 Push rod 2 off
Finish : Anodise item 1.
Black oxide item 2
Quantity : 1 off.
PAGE 408
32-11-08 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

SLEEVE - ASSEMBLY, MAIN GEAR SLIDING MEMBER SEALS
105mm
(4.0in)
460002678
SEAL ASSEMBLY
TOOL
BEARING NUT
SUB-ASSEMBLY (REFJ
SLIDING MEMBER
{REFJ
38
i
Usage To assemble the spacer and the wiper ring
Effactivity Aircraft fitted with Dowty Aerospace main landing gears,
Finish Black oxide.
Quantity 1 off.
Vendor code K0654.
PAGE 409
32-11 -08 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace

ADAPTER - GLAND NUT TORQUE
124 mm
(4,87 in)
288 mm
(11,33 in)
| Usage : To remove/install the gland nut from the outer cylinder assembly.
Effectivity : Aircraft fitted with Menasco main landing gears.
Quantity : 1 off.
PAGE 410
32-11-08 MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace

TOOL - INSTALLATION, SCRAPER AND SEAL
139mm
(5.7in)
6.4mm
(0.25in)
Usage To install the scraper and seal onto the piston assembly.
Effactivity Aircraft fitted with Menasco main landing gears.
Quantity 1 off.
Vendor code 02121.
PAGE 411/412
32-11-08 MAR 01/95
FOKKER 70/100
«rof
Deutscfie Aerospace

SET - SPANNER
150mm
(5.90in)
37mm
(1,45in)
F100-TEM-0118
Usage : To adjust the main gear inner door stops.

Tool
consists of : A. Spanner 28-0-1882-02 1 off
B. Spanner 28-0-1882-03 1 off
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
32-12-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

LEVER - PLUNGER UNLOCKING
FIOO-TEM-0064
Usage To unlock the nose gear downlock plunger manually.

Parts list 1. Lever assy 28-0-1421-01 1 off
2. Bar 28-0-1421-07 1 off
4. Nut MS21042L4 1 off
5. Pin-threaded 28-0-1421-08 1 off
Effectivity All.
Quanti ty 1 off.
PAGE 401
32-21-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace
| Part number : 28-0-1380F

ADAPTER - NOSE WHEEL AXLE NUT TORQUE
13 mm
(0.5 in)
74 mm
(2.9 in)
F100-TEM-0058b
Usage : To remove/install and torque the nose wheel axle nut.

Effectivity : All.
Quantity : 1 off.
Supplementary data:
Part nr: 28-0-1380D and 28-0-1380E are fully interchangeable.
Part nr: 28-0-1380F introduced due to new production methods.
PAGE 402
32-21-01 MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace

PAD - PRESSURE, NOSE GEAR SLIDING MEMBER BUSHES
VIEW A
38 mm
(1.5 in)
X
-«——————————————_
in r^rr.
I (2.75 in)
hU
F100-TEM-32010
Usage : To install the nose gear sliding member bushes,

Effectivity : All.
Quantity : 1 off.
PAGE 403
SEP 01/94
FOKKER 70/100
jerof
Deutsche Aerospace
Part number : ST2170

PULLER - PRESSURE, NOSE GEAR SLIDING MEMBER BUSHES
ST2170
Usage To remove the nose gear sliding member bushes.

Effectivity : All.
Quantity : 1 off.
PAGE 404
SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
PAGE 501
32-21-01 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
Part number : 460001682-75

TUBE SPANNER - RETAINING NUT
ST2075/44
C SPANNER
460001682/75 (REF)
201071666
VALVE HOUSNG TUBE SPANNER
44 mm 76 mm
(1-75 in) (3-0 in)
F1002374K
PAGE 502
32-21-01 SEP 01/94
FOKKER 70/100
Deutscne Aerospace
Part number : 460001682-75 Cont'd

TUBE SPANNER - RETAINING NUT
Usage : To remove/install the retaining plug.

Parts list : FOR PARTS AND MAINTENANCE INFORMATION, RFFER TO VENDOR
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
bt
OH nn ™
PAGE OUJ/OUH
503/504
-d 1-U I SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SPANNER - GLAND NUT
TURNNG TUBE (REF)

56mm 76mm
(2.2 h) (3.0 h )
•502mm
(19.8 h)
SPANNER'
460002249
F10Q2351K
Usage : To remove/install the gland nut.

Effectivity : All.
Quantity : 1 off.
PAGE 401
32-21-06 SEP 01/94
FOKKER 70/100
Deutscne Aerospace

EXTRACTOR - BEARING
TURNNG TUBE (REF)
5,8mm
1 1
0-6 h )
| :
t
191mm
BEARNG (REF)
EXTRACTOR
460002445
F10023S7K
Usage : To remove the bearing.

DOCUMENTATION.
Effectivity : All.
Finish : Anodise item 1 and 2, black oxide items 3 to 6.
Quantity : 1 off.
PAGE 402
SEP 01/94
FOKKER 70/100
«rof
Deutsche Aerospace

ASSEMBLY TOOL - DOWEL
\
45 mm .—
VALVE HOUSNG (REF) I i ; , 1 ——(
84mm
6 7 3 2 A* ——— (3-3VO - tfu
BEARMG (REF) ASSEMBLY TOOL

460002518
16mm
(0.6 h)
SLDNG MEMBER (REF)
F1002359K
Usage To install the dowels in the sliding member.

DOCUMENTATION.
Effectivity : All.
Finish : Black oxide parts 1,2,4,5 and 7.
Quantity 1 off.
PAGE 403
32-21-06 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

SPANNER - STOP SLEEVE
53 mm
2.1'n
OUTSTOP (REF)
——n——
—— 108 mm
(4-3in)
TURNNG TUBE (REF)
500 mm
(19.7h)
SPANNER
460002288
F10023SOK
Usage To remove/install the outstop.

Effectivity All.
Finish Black oxide.
Quantity 1 off.
Vendor code K0654.
PAGE 404
SEP 01/94
FOKKER 70/100
Deutsche Aerospace
Part number : ST2075-44

C-SPANNER - NOSE GEAR LEG
ST2075/44
C SPANNER
VALVE HOUSNG
201071666
76 mm
(3 Oh)
F1002365K
Usage : To remove/install the valve housing.

Effectivity : All.
Quantity : 1 off.
PAGE 405
32-21 -06 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

SLEEVE - ASSEMBLY, NOSE GEAR GLAND NUT AND SEALS
81.153 mm
(3.195 in)
25,4 mm
(1,0 in)
VIEW A
F100-TEM-32007
Usage To assemble the nose gear gland nut and seals,

Effectivity All.
Finish Black oxide.
Quanti ty 1 off.
Vendor code K0654.
PAGE 406
SEP 01/94
FOKKER 70/100
Amernber of
Deutsche Aerospace

SLEEVE - SLIDING MEMBER ASSEMBLY, NOSE GEAR
101,6 mm
(4,0 in)
VIEW A
F10Q-TEM-32Q09
Usage : To assemble seals ETC to turning tube. To be used with

p/n 460002344.
Effectivity : All.
Quantity : 1 off.
PAGE 401
-08 SEP 01/94
FOKKER 70/100
Deutscne Aerospace

SLEEVE - SLIDING MEMBER ASSEMBLY, NOSE GEAR
71,4 mm
(2,8 in)
VIEW A
F100-TEM-3200B
Usage To assemble seals ETC to turning tube,

Effectivity All.
Quantity 1 off.
Vendor code K0654.
PAGE 402
SEP 01/94
FOKKER 70/100
A member of
DeuiscneAeroswce

ADAPTER - TURNING TUBE CAP NUT
din)
:o 63mm
(2,5in)
o
r 1
VIEW A
7,9mm
C0,3in)
198mm
(7,8in)
t
1
o
VIEW B
uu
Usage : To tighten the cap nut onto the turning tube.

Effect! vity : NLGpn's 201071001 and 201071002
Quantity : 1 off.
Vendor code i K0654.
PAGE 403
32-21-08 NOV 01/09
FOKKER 70/100
A member of
Deutscne Aerosiace

ADAPTER - TURNING TUBE CAP NUT
20mm
63mm
(2,5in)
7,9mm
(0,3in)
198mm
fi
(7,8in)
i VIEW B
Usage To tighten the cap nut onto the turning tube.

Effactivity NLG pn's 201071001, 201071002,201071004,201456001 and 201461001.
Finish Black oxide.
Quanti ty 1 off.
Vendor code K0654.
PAGE 404
32-21-08 NOV 01/09
FOKKER 70/100
Deutsche Aerospace

TOOL - ACTUATOR ADJUSTMENT
VIEW A F100-TEM-0063a
Usage To adjust the nose gear door cross shaft.

Tool
consists of A. Plate 28-0-2490-01 1 off
B. Pin 28-0-2490-02 1 off
C. Stud 28-0-2490-03 3 off
D. Case 28-0-2490-04 1 off
Effectivity : All.
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 401/402
32-22-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : 28-0-1618E

CART - HYDRAULIC TEST
DIMENSIONS TBD
F100-TEM-0119
Usage To test hydraulic sub systems and components.

Effectivity All.
Quanti ty 1 off.
PAGE 501/502
32-22-00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

TOOL - SELECTOR VALVE ADJUSTMENT, LANDING GEAR
300mm
80mm
(3.2in)
F100-TEM-0077Q
Usage : To adjust the operating lever of the landing gear selector.

Parts list 1. Block 28-0-2151-01 1 off
2. Pin 28-0-2151-02 1 off
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
32-31-03 SEP 01/94
FOKKER 70/100
. jerof
Deutscne Aerospace

ADAPTER - TORQUE
F100-TEM-0068
Usage : To apply torque to uplock actuator attachment nuts.

Effect!vity : All.
Quantity : 1 off.
PAGE 401
32-31-04 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace
Part number : 28-0-1455F

TOOL - ADJUSTMENT
F100-GEM-0067
PAGE 402
OH rvi
-O I-U4 SEP 01/94
FOKKER 70/100
A member of
Deucsche Aerospace
Part number : 28-0-1455F Cont'd

TOOL - ADJUSTMENT
Usage To fix the control lever and end pulley at wing root during
adjustment of the main gear alternate extention control system.
Tool
consists of A. Shackle-LH 28-0-1455-04 1 off
B. Tool-adjustment-LH 28-0-1455-01 1 off
C. Shack!e-RH 28-0-1455-03 1 off
D. Tool-adjustment-RH 28-0-1455-02 1 off
Parts list Part B
1. Eyebolt 28-0-1455-09 1 off
2. Nut NAS509L5 1 off
3. Body-turnbuckle MS21251B6S 1 off
5. Eye end 28-0-1455-06 1 off
Part D
1. Eyebolt 28-0-1455-09 1 off
2. Nut NAS509L5 1 off
3. Body-turnbuckle MS21251B6S 1 off
5. Eye end 28-0-1455-05 1 off
Effectivity All.
Quantity 1 off.
PAGE 403/404
32-31-04 SEP 01/94
FOKKER 70/100
Aroerrtoerof
Deutsche Aerospace
| Part number : 28-0-2158B

TOOL - DUMP VALVE ADJUSTMENT
128
(5_04in)
F100-TEM-0065
Usage To adjust the actuating rod of the dump valve in the down
position. To be used with p/n 28-0-1760D which is part of rigging
pin set p/n 28-0-4378.
Parts list 1. Plate 28-0-2158-01 1 off

2. Pin assy 28-0-2158-02 1 off
3. Pin assy 28-0-2158-03 1 off
Effectivity : All.
Quantity : 1 off.
32-32-02
PAGE 401/402
MAR 01/95
FOKKER 70/100
A rr>ember of
Deutsche Aerospace

LOCK - SAFETY
18
F100-TEM-0069
Usage To prevent closing of the main gear inboard doors during work in
the main wheel bays.
Parts list 1. Arm-support 28-0-1859-01 2 off
2. Felt 28-0-1859-21 4 off
3. Eye end 28-0-1859-10 1 off
4. Pin-split MS24665-304 2 off
5. Washer 28-0-1859-18 2 off
6. Pin 28-0-1859-15 2 off
7. Tube 28-0-1859-09 1 off
8. Pin 28-0-1859-13 2 off
9. Pin TBD 1 off
10. Cable FON1-7113-1-6 AR
11. Terminal 28-0-1859-25 2 off
12. Plumbing 28-0-1859-26 1 off
13. Tube 28-0-1859-08 1 off
14. Pin 28-0-1859-14 2 off
15. Screw end 28-0-1859-07 1 off
16. Body-turnbuckle 28-0-1859-17 1 off
17. Screw-end 28-0-1859-16 1 off
18. Plate-serial 28-0-1859-22 1 off
Effectivity : All.
Finish : A caution flag must attached to this tool (Refer to chapter 20).
Quantity : 1 off.
PAGE 501/502
32-32-09 SEP 01/94
FOKKER 70/100
^-/
A member of
Deutsche Aerospace

SET - RIGGING PIN
Usage To rig the landing gear alternate extension control system.

Tool
consists of A. 28-0-1760D
B. 28-0-2012-07
Effectivity : All.
Weight and
packaging 1 set.
Quanti ty 1 off.
32-33-00
PAGE 501/502
SEP 01/94
FOKKER 70/100
Amember of
DCUtSChC ABTOSD3C6
Part number : 5E88-511

GAUGE - CHECKING, BRAKE DISC DRIVE CHANNELS
33 mm
"(1.3 in)"
34,3 mm
(Uin)
F100-TEM-32006
Usage : To check the wear at the brake disc drive channels.

Effectivity : All.
Quantity : 1 off.
Vendor code : OB9R9.
PAGE 601/602
32-42-01 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerosoace
PAGE 501
32-43-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

SET - RIGGING PIN
VIEW X
65mm
(2,5in) B
215mm 320mm
(8,46in) (12.59in)
ABCD VIEWY
VIEWZ
F100-TEM-0126
PAGE 502
32-43-00
FOKKER 70/100
A member of
Deutsche Aerosoace

SET - RIGGING PIN
Usage To rig the normal brake control system.

Tool
consists of A. Pin 28-0-3960-01 2 off
B. Pin 28-0-3960-02 2 off
C. Pin 28-0-3960-03 2 off
D. Pin 28-0-3960-04 1 off
E. Case 28-0-3960-14 1 off
Effectivity : All.
Finish : A caution flag must be attached to each of the pins (refer to
chapter 20).
Weight and
packaging 1 case.
Quanti ty 1 off.
PAGE 503/504
32-43-00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

TEST SET - BRAKE BLEEDING AND TEST
350mm 550mm
(13,77in) (21,65in)
F100-TEM-0120a
Usage : To bleed the brakes and perform a pressure test without removal of
the wheel assemblies.
Tool
consists of : A. Gauge assy
B. Bleed tube assy
C. Hose assy
D. Case
Effectivity : All.
Weight and
Quantity : 1 off.
PAGE 501/502
32-44-00 SEP 01/94
FOKKER 70/100
A member of
DeutscfteAerosoace
Part number : 460001682-81

ADAPTER - CARRIER TORQUE, WHEELSPEED SENSOR
254mm
dO.Oin)
42mm
(1.64in)
165mm
(6.5in>
Usage : To remove or install the carrier of the wheel speed sensor.

Effectivity : All.
Quantity : 1 off.
PAGE 401
32-45-02 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : 460001682-82

ADAPTER - LOCKNUT TORQUE, WHEELSPEED SENSOR
254-mm
dO.Oin)
_E
~E o 47mm
(1.87in)
127mm
(S.Oin)
Usage : To remove or install the locknut of the wheel speed sensor,

Quantity : 1 off.
PAGE 402
32-45-02 SEP 01/94
FOKKER 70/100
jerof
Deutsche Aerospace

ADAPTER - LOCKNUT TORQUE, WHEELSPEED SENSOR
50 mm
(2,0 in)
VIEW B
VIEW H ^X.^; F100-TEM-32005
Usage To remove or install the locknut of the wheel speed sensor.

Effectivity For aircraft with Menasco landing gear only.
Quanti ty 1 off.
PAGE 403/404
32-45-02 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

CONTRLLR - SHUT-OFF AND SERVO VALVE, AUTOMATIC BRAKE SYSTEM
F100-TEM-0386
Usage : To remove the shut-off and servo valve of the automatic brake
system to the open position. This makes bleeding and leak-testing
of the system possible.
Tool
consists of A. Test box ZO 7080 1 off
Effectivity All.
Quantity 1 off.
PAGE 301/302
32-48-00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

TEST BOX - CONTROL UNIT, AUTOMATIC BRAKE
EXTENDER
CABLE ASSEMBLY
Usage To repair and overhaul the automatic braking system control unit
type EAABC8615.
Tool
B. Extender 28-0-4249-EXA1288-431 1 off
C. Cable assy 28-0-4249-CA0288-005 1 off
Effectivity All.
Quantity 1 off.
PAGE 501/502
32-48-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace
PAGE 501
32-52-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

KIT - RIGGING, NOSE WHEEL STEERING SYSTEM
410mm
(16.2in)
DFG
PAGE 502
32-52-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

KIT - RIGGING, NOSE WHEEL STEERING SYSTEM
Usage : To adjust the nose wheel steering system.

Tool
consists of A. Rigging tool 28-0-4113-01 1 off
B. Rigging tool 28-0-4113-02 1 off
C. Bracket 28-0-4113-03 1 off
D. Rigging pin 28-0-4113-04 1 off
E. Rigging pin 28-0-4113-05 1 off
F. Rigging pin 28-0-4113-06 2 off
G. Rigging pin 28-0-4113-07 1 off
H. Rigging pin 28-0-4113-08 1 off
J. Rigging pin 28-0-4113-09 1 off
K. Case 28-0-4113-70 1 off
Effectivity : All.
Finish : A caution flag is attached to each rigging pin (refer to
chapter 20).
Weight and
Quanti ty : 1 off.
PAGE 503/504
32-52-00 SEP 01/94
FOKKER70/100

TOOL - SWITCH ADJUSTMENT
50mm
(1.97 in)
8mm
(0315m)
F100-TEM-0125
Usage To adjust the downlock switch of the nose gear position

indicating system. To be used with tools p/n 28-0-1881 and p/n
28-01421H.
Effectivity For aircraft equipped with microswitches.
Finish A caution flag must be attached to this tool (Refer to chapter
20).
Quantity 1 off.
PAGE 501
32-61-01 AUG 01/99
FOKKER70/100

DUMMY - SENSOR, MENASCO M.L.6. DOWN LOCK
Usage To adjust the brackets of the sensors and targets of the main
landing gear down lock only.
Effectivity For aircraft with Menasco M.L.G. only.
Quantity 1 off.
PAGE 502
32-61-01 MAR 01/95
FOKKER 70/100
Deutsche Aerospace

TOOL - ADJUSTMENT, GROUND FLIGHT SWITCH
VIEW A
26mm did
(1.02 in)
VIEW B
Usage : To adjust the ground/flight switch on the MLG.

| Effectivity : All aircraft with ground/flight microswitches.
Quantity : 1 off.
PAGE 501/502
32-63-01 MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace
PAGE 401
no
-U O SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerosoace

EXTRACTOR - HINGE PINS MLG, TORQUE LINKS
760mm
(29,9in)
F100-TEM-0355Q
PAGE 402
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

EXTRACTOR - HINGE PINS MLG, TORQUE LINKS
Usage For removal/installation of the hinge pins in the MLG torque

links.
Parts list 1. Pump-hand 28-0-4683-22 1 off
2. Nut 28-0-4683-06 1 off
3. Hose 28-0-4683-24 1 off
4. Rod 28-0-4683-05 1 off
5. Bushing 28-0-4683-04 1 off
6. Screw sock. Hd. 3/8"xl6 UNC, 3/4"!g 2 off
7. Washer AN960-616 2 off
8. Cylinder 28-0-4683-23 1 off
9. Nut-knurled 28-0-4683-07 1 off
10. Cap-dust 28-0-4683-25 1 off
11. Nut DIN934-M16 1 off
12. Tube 28-0-4683-10 1 off
13. Rod 28-0-4683-09 1 off
14. Nut 28-0-4683-08 1 off
15. Stop 28-0-4683-14 1 off
16. Plunger-spring 28-0-4683-30 1 off
17. Pin 28-0-4683-12 1 off
18. Bushing 28-0-4683-13 1 off
Effectivity : All.
Weight and
Quantity 1 off.
PAGE 403/404
32-90-03 SEP 01/94
FOKKER 70/100
^member of
DeutSCflB ASTOSD3C6
PAGE 201
32-90-05 SEP 01/94
FOKKER 70/100
A member of
DeutscheAerosoace

HOSE - FILL AND BLEED, SHIMMY DAMPER TORQUE LINK
520mm
(20,4 in)
F100-TEM-0357
PAGE 202
32-90-05
FOKKER 70/100
A member of
Deutsche Aerospace

HOSE - FILL AND BLEED, SHIMMY DAMPER TORQUE LINK
Usage Filling and bleeding the MLG toque link.

Parts list 1. Union-tee 28-0-4834-13 1 off
2. Hose assy 28-0-4834-12 2 off
3. Tube adapter 28-0-4834-18 1 off
4. Valve 28-0-4834-15 1 off
5. Hose 28-0-4834-17 1 off
6. Case 28-0-4834-23 1 off
7. Cap 28-0-4834-04 1 off
8. Ring-teflon MS9058-04 1 off
9. Seal NAS1612-4 1 off
10. Nut 28-0-4834-01 1 off
11. Lanyard 28-0-4834-09 1 off
12. Cap 28-0-4834-03 1 off
13. Nut 28-0-4834-02 1 off
14. Cap 28-0-4834-07 2 off
15. See item 14
16. Quick disconnect 28-0-4834-06 2 off
17. Nut AN6289D4 1 off
18. See item 16
19. Quick disconnect 28-0-4834-05 1 off
20. See item 2
Effectivity All.
Quanti ty 1 off.
PAGE 203/204
32-90-05 SEP 01/94
FOKKER 70/100

E E
LEP 1/2 SEP 01/06 R

33-13-01 101 SEP 01/94
33-13-01 102 SEP 01/94
33-13-01 103 SEP 01/94
33-13-01 104 SEP 01/94
33-52-02 601 SEP 01/06 N
33-52-02 602 SEP 01/06 N
LEP CHAPTER 33
Page 1/2
SEP 01/06
FOKKER 70/100
TABLE OF CONTENTS
28-0-4239 TEST BOX – DIMMING CONTROL UNIT 33-13-01 102

DB-45-B3 COMPARATOR – GREEN COLORED 33-52-02 601
DB-45-B4 COMPARATOR – YELLOW COLORED 33-52-02 602

SEP 01/06
FOKKER 70/100
Deutsche Aerospace
PAGE 101
33-13-01 SEP 01/94
FOKKER 70/100
A member of
DeuBcneMRxoxe

TEST BOX - DIMMING CONTROL UNIT
F100-TEM-0343
PAGE 102
fH
-U I SEP 01/94
FOKKER 70/100
Deutsche Aerospace

TEST BOX - DIMMING CONTROL UNIT
Usage For repair and overhaul of the dimming supply control units type
EAIFS8531, EAFPG8532, EAODS8416, EAHDS8530 and EAADL8529.
Tool
B. Cable assembly
C. Cable assembly
D. Cable assembly
E. Cable assembly
F. Cable assembly
G. Extender assembly
Effectivity : All.
Weight and
packaging 8 kg (17,6 Ib), 1 case.
Quantity 1 off.
PAGE 103/104
33-13-01 SEP 01/94
FOKKER 70/100
Part number : DB-45-B3

COMPARATOR – GREEN COLORED
Usage : To do a check of the self-illuminated exit signs for

brightness.

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
33-52-02
PAGE 601
SEP 01/06
FOKKER 70/100
Part number : DB-45-B4

COMPARATOR – YELLOW COLORED
Usage : To do a check of the self-illuminated exit signs for

brightness.

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
33-52-02
PAGE 602
SEP 01/06
FOKKER70/100

E E
LEP 1/2 AUG 01/99 R

34-00-01 501 SEP 01/94
34-00-01 502 SEP 01/94
34-00-01 503 MAR 01/95
34-00-01 504 SEP 01/94
34-00-01 505 SEP 01/94
34-00-01 506 SEP 01/94
34-42-01 501 SEP 01/94
34-42-01 502 SEP 01/94
34-46-00 501 AUG 01/99 R
34-46-00 502 AUG 01/99 R
34-54-00 501 AUG 01/99 R
34-54-00 502 AUG 01/99 R
34-61-00 201 SEP 01/94
34-61-00 202 SEP 01/94
34-61-00 203 SEP 01/94
34-61-00 204 SEP 01/94
Page 1/2
FOKKER70/100
TABLE OF CONTENTS
PART NUMBER KEYWORD AND PART DESCRIPTION CH-SE-SU
NAV402AP TEST SET - NAVIGATION SYSTEM 34-00-01 501

ADTS300 TEST SET - PITOT STATIC SYSTEM 34-00-01 502
ADAF100-612 KIT - TEST ADAPTERS 34-00-01 503
PV100 SUPPLY UNIT - PRESSURE/VACUUM 34-00-01 504
9599-607-15902 SIMULATOR - FLIGHT LINE 34-00-01 505
28-0-4316 CABLE - RADIO ALTIMETER, COLLINS 34-42-01 501
T49 TEST SET - TCAS AND ATC TRANSPONDER 34-46-00 501
TCAS201 TEST SET - TRAFFIC ALERT AND COLLISION 34-46-00 502
AVOIDANCE SYSTEM
ATC600A TEST SET - DME AND ATC SYSTEM 34-54-00 501
ATC601 TEST SET - TRANSPONDER RAMP 34-54-00 502
2760A LOADER - DATA 34-61-00 201
964-0400-006 LOADER - DATA 34-61-00 202
964-0400-011 LOADER - DATA 34-61-00 202
964-0400-015 LOADER - DATA 34-61-00 202
704-2221-001 CABLE - ADAPTER 34-61-00 203
34 CONTENTS
FOKKER 70/100
Deutsche Aerospace
Part number : NAV402AP

TEST SET - NAVIGATION SYSTEM
381mm
(15 in) F100-TEM-0358
Usage : Functional testing and calibration of MKR, NAV and Comm avionics.
Tool
B. Antenna
DOCUMENTATION.
Effectivity : All.
Weight and
packaging : 8.165 kg (18 Ib).
Quantity : 1 off.
n A nn n-i PAGE 501

34-00-01 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace
Part number : ADTS300

TEST SET - PITOT STATIC SYSTEM
PV100
F100-TEM-0304
Usage : To test the pi tot and static systems and related systems for leaks
and correct operation. To be used with p/n ADAF100-612 and PV100.
Tool
B. Handheld remote control unit
DOCUMENTATION.
Effectivity : All.
Weight and
Quantity : 1 off.
PAGE 502
34-00-01 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace
Part number : ADAF100-612

KIT - TEST ADAPTERS
Usage To test the complete pi tot and static air data systems. To be used
with ADTS300 and PV100.
Tool
consists of A. Pi tot test adapter 2 off
B. Suspension arm assembly 1 off
C. Static test adapter ââ- 1 off
D. Pre-test adapter 2 off
E. Static universal test adapter 4 off
F. Pi tot test hose assembly 1 off
G. Static system test hose assembly 1 off
H. Container lubricating fluid 1 off
J. Manual with parts list for each unit 1 off
DOCUMENTATION.
Effectivity : All.
Weight and
Quantity : 1 off.
PAGE 503
34-00-01 MAR 01/95
FOKKER 70/100
Amemberof
Deutsche Aerospace
Part number PV100

SUPPLY UNIT PRESSURE/VACUUM
454,6mm
(17,9 in)
F100-TEM-0305
Usage : To provide pneumatic supply to the ADTS300 test set.

Effectivity : All.
Weight and
Quantity : 1 off.
PAGE 504
34-00-01
FOKKER 70/100
A member of
Deutscne Aerosoace
Part number : 9599-607-15902

SIMULATOR - FLIGHT LINE
460mm
380mm
(14,96 in) I
B -f_
~ KOmnJ
D (5.5 in).'
a C—1J a
A
F100-TEM-0127
Usage To test the radio altimeter system on the aircraft.

Tool
consists of A. Desk
B. Cable coaxial W53
C. Cable W87
D. Cable W88
E. Cable W89
F. Manual
DOCUMENTATION.
Effect!vity : All.
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 505/506
34-00-01 SEP 01/94
FOKKER 70/100
Deutscfle Aerosoace

CABLE - RADIO ALTIMETER, COLLINS
VIEW A
F100-TEM-34001
Usage : For testing the radio altimeter transmitter type coll ins in
combination with TRT sim 530 simulator.
Effectivity : All.
Quantity : 1 off.
PAGE 501/502
34-42-01 SEP 01/94
FOKKER70/100
Part number : T49

TEST SET - TCAS AND ATC TRANSPONDER
165mm
(6,5in)
368mm
239rnm (U,5in)
(9,4in)
F10Q-TEM-0402
Usage For functional testing and trouble-shooting of TCAS and ATC

transponder.
Parts list FOR PARTS AND MAINTENANCE INFORMATION, REFER TO THE VENDOR
DOCUMENTATION.
Effectivity : All aircraft equipped with a TCAS and/or a mode S transponder.
Weight and
packaging 8,7 kg (3,9 Ib), 1 case.
Quantity 1 off.
Vendor code 92606.
PAGE 501
34-46-00 AUG 01/99
FOKKER 70/100
Part number : TCAS201

TEST SET - TRAFFIC ALERT AND COLLISION AVOIDANCE SYSTEM
361mm
(1V2in)
Usage : For verification of proper operation of an aircrafts

installation.
DOCUMENTATION.
Effectivity : All aircraft equipped with TCAS.

Weight and
packaging 30 kg (66 Ibs). 1 case.
Quantity 1 off.
Vendor code 22525.
PAGE 502
34-46-00 AUG 01/99
FOKKER70/100
Part number : ATC600A

TEST SET - DME AND ATC SYSTEM
F100-TEM-OT28
Usage Testing of transponder and DME signals.

Tool
consist of A. Test set
B. Antenna
C. Tripod
D. Cable
DOCUMENTATION.
Effectivity : All.
Weight and
packaging 8,165 kg (18 Ib), 1 metal case, except antenna, tripod and
cable.
Quantity 1 off.
Vendor code 22525.
PAGE 501
34-54-00 AUG 01/99
FOKKER 70/100
Part number : ATC601

TEST SET - TRANSPONDER RAMP
279mm
(11,0'm)
361mm
(14,2in)
Usage : For functional testing and trouble shooting of ATC system.

Parts list : FOR PARTS AND MAINTENANCE INFORMATION. REFER TO THE VENDOR
DOCUMENTATION.
Effectivity : All aircraft equipped with Mode S, A and C transponders.
Weight and
packaging 30 kg (66 Ibs), 1 case.
Quantity 1 off.
Vendor code 22525.,
PAGE 502
34-54-00 AUG 01/99
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : 2760A

LOADER - DATA
448mm 248mm
(17,65 in.) (9,75 in.]
280mm
(11,00 in.)
F100-TEM-0306
Usage To transfer data from a magnetic tape to the Flight Management

Computer (FMC).
Effectivity : All.
Weight and
packaging 13.6 kg (30 Ib), 1 case.
Quantity 1 off.
Vendor code 6S097.
O X ^-< A A PAGE *201

KMbr: U1
34-61-00 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace
Part number : 964-0400-015

LOADER - DATA
VIEW A
F100-TEM-0385
Usage : To transfer - every 28 days - data from a 3,5 in. diskette to the
data base of the Flight Management Computer (FMC). Use with cable
- adapter partnumber 704-2221-001.
Effectivity : All.
Weight and
Quantity 1 off.
Vendor code 97896.
NOTE: The data-loaders with p/n 964-0400-011 or 964-0400-006 can
also be used.
PAGE 202
34-61-00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
Part number : 704-2221-001

CABLE - ADAPTER
305mm i 25,4-mm
(12,0in * t.Oin)
VIEW A
F100-TEM-038t
Usage To connect the loader - data, p/n 964-0400-006 or 964-0400-011 or

964-0400-015 to the aircraft.
Effactivity All.
Quanti ty 1 off.
Vendor code 97896.
PAGE 203/204
34-61-00 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace


E E
LEP 1/2 SEP 01/94
35-21-00 401 SEP 01/94
35-21-00 402 SEP 01/94
35-90-00 501 SEP 01/94
35-90-00 502 SEP 01/94
LEP CHAPTER 35
FOKKER 70/100
Amenfiber of
DcutschB Aeroso3ce
TABLE OF CONTENTS

995022 PLIERS - SAFETY-PIN INSERTION 35-21-00 401
28-0-4060 TEST SET - CREW OXYGEN SYSTEM 35-90-00 501
35 CONTENTS
FOKKER 70/100
A member of
DeutSCfie A6TOSD9C6

PLIERS - SAFETY-PIN INSERTION
Usage To install the safety-pin before removal of the passenger oxygen

generators.
Effectivity All.
Quanti ty 1 off.
Vendor code 16827.
PAGE
o-i nn 401/402
-£ I-UU SEP 01/94
FOKKER 70/100
jerof
Deutsche Aerospace

TEST SET - CREW OXYGEN SYSTEM
F100-TEM-01293
Usage : To check the crew oxygen system with nitrogen.

Effectivity : All.
Weight and
packaging : 1 case.
Quanti ty : 1 off.
PAGE 501/502
35-90-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace


E E
LEP 1/2 SEP 01/94
36-11-00 501 SEP 01/94
36-11-00 502 SEP 01/94
36-11-00 503 SEP 01/94
36-11-00 504 SEP 01/94
36-12-03 401 SEP 01/94
36-12-03 402 SEP 01/94
36-12-03 501 SEP 01/94
36-12-03 502 SEP 01/94
36-90-01 201 SEP 01/94
36-90-01 202 SEP 01/94
36-91-01 301 SEP 01/94
36-91-01 302 SEP 01/94
36-92-01 501 SEP 01/94
36-92-01 502 SEP 01/94
PAGE 1/2
FOKKER 70/100
A member of
Deutscne Aerosoace
TABLE OF CONTENTS
28-0-1643D TEST SET - THERMO SWITCHES 36-11-00 501

28-0-0300H TEST SET - BLEED AIR DUCTING 36-11-00 502
28-0-5303 TEST BOX - ATMOSPHERE ALTITUDE SWITCHES 36-11-00 503
28-0-1765C CLAMP - INSTALLATION 36-12-03 401
28-0-5008 STRAP - INSTALLATION, PERI SEAL HOUSING 36-12-03 402
28-0-4107B TEST SET - SAFETY VALVE 36-12-03 501
28-0-2066 TOOL - FLARING 36-90-01 201
28-0-2085B TOOL - FLARING 36-90-01 202
M7950-93S3 COUPLING - HP GROUND CONNECTION 36-91-01 301
28-0-2807C TESTER - SNIFFLE VALVE 36-92-01 501
Page 1/2
FOKKER 70/100
Amemberof
Deutsche Aerosoace

TEST SET - THERMO SWITCHES
300mm {11,8i
F100-TEM-0321
Usage : To test the bleed air, air conditioning bay and the cooling pack
outlet overheat switches.
Tool
consists of : A. Heating iron
B. Thermophil meter
C. Thermophil probe
D. Heating iron adapter
E. Heating iron adapter
F. Heating iron adapter
G. Heating iron adapter
Effectivity : All.
Weight and
packaging : 1 plastic case.
Quanti ty : 1 off.
PAGE 501
0£* H H AA
36-11-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TEST SET - BLEED AIR DUCTING
483mm
(19f01in)
362mm
(U,2in)
F100-TEM-0130
Usage : To measure pressure and pressure drops in the bleed air ducts
during pressurization and leakage tests.
Tool
B. Hose assy
C. Hose assy
D. Pipe assy
Effectivity : All.
Quantity : 1 off.
PAGE 502
36-11 -00 sEPoim
FOKKER 70/100
Deutsche Aerospace

TEST BOX - ATMOSPHERE ALTITUDE SWITCHES
Usage : To do an operational check of the atmospheric altitude switches

1 and 2.
Tool
B. Adapter cable
Effectivity : All.
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 503/504
36-11-00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

CLAMP - INSTALLATION
F100-TEM-0073
Usage To remove/install the peri seal housing.

Parts list 1. Clamp assy 28-0-1765-01 1 off
2. Plate 28-0-1765-05 1 off
3. Nut FON2-2206-1 1 off
Effectivity All.
Quantity 1 off.
PAGE 401
36-12-03 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerosoace

STRAP - INSTALLATION, PERI SEAL HOUSING
16.3 mm
(0 6** in)
VIEW A
F100-TEM-0383
Usage To simplify the installation of a peri seal housing over a 5 in

(127 mm) bleed-air duct.
Effectivity All.
Quanti ty 1 off.
PAGE 402
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TEST SET - SAFETY VALVE
F100-TEM-0189a
Usage : To perform a functional check of the bleed air safety valve. When
ordering this tool use the new tool p/n 28-0-2807C.
Tool
consists of : A. Indicator assembly
B. Union
C. Case
Weight and
packaging : 1 case.
Quanti ty : 1 off.
PAGE 501/502
36-12-03 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TOOL - FLARING
14
10
13
F100-TEM-0131
Usage To reset 5 in. bleed air pipe flares.

Parts list 1. Roll 28-0-2066-17 1 off
2. Roll 28-0-2066-18 1 off
3. Roll 28-0-2066-19 1 off
6. Nut MS21042L06 4 off
7. Nut 28-0-2066-15 1 off
8. Eyebolt 28-0-2066-12 1 off
9. Plate 28-0-2066-16 2 off
11. Pin 28-0-2066-27 2 off
12. Block 28-0-2066-20 1 off
13. Arm 28-0-2066-01 1 off
14. Arm 28-0-2066-06 1 off
Effect!vity : A l l .
Quantity : 1 off.
PAGE 201
36-90-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

TOOL - FLARING
12
15
78mtn
(3.07in)
F100-T EM-0132
Usage To reset 3 in. bleed air pipe flares.

Parts list 1. Roll 28-0-2085-10 1 off
2. Roll 28-0-2085-11 1 off
3. Roll 28-0-2085-12 1 off
6. Nut MS21042L3 3 off
7. Nut 28-0-2085-13 1 off
8. Pin MS16562-35 2 off
9. Plate 28-0-2085-14 2 off
11. Block 28-0-2085-15 1 off
12. Pin 28-0-2085-24 1 off
13. Eyebolt 28-0-2085-05 1 off
14. Arm 28-0-2085-06 1 off
15. Arm 28-0-2085-01 1 off
Effectivity All.
Quanti ty 1 off.
PAGE 202
36-90-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : M7950-93S3

COUPLING - HP GROUND CONNECTION
F100-TEM-0133
Usage To connect a ground air unit to the aircraft pneumatic system.

DOCUMENTATION
Effectivi ty All.
Quantity 1 off.
Vendor code : OSWM9.
PAGE 301/302
36-91-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TESTER - SNIFFLE VALVE
'l'-^\
s **
P50-TEM-0051b
Usage : To test the bleed-air safety valve. To be used with p/n H0040.
This tool is identical to p/n 28-0-4107B, test set - safety valve,
which is no longer in production.
Effectivity : All.
Weight and
packaging 1 plastic case.
Quantity 1 off.
PAGE 501/502
36-92-01 SEP 01/94
FOKKER 70/100
Amwnbcr of
Deutscne Aerospace


E E
LEP 1/2 SEP 01/94
38-00-00 401 SEP 01/94
38-00-00 402 SEP 01/94
38-12-00 301 SEP 01/94
38-12-00 302 SEP 01/94
LEP CHAPTER 38
FOKKER 70/100
Amemberof
Deutsche Aerosoace
TABLE OF CONTENTS

28-0-4771 SET - MOUNTING, WASH WATER TUBING 38-00-00 401
28-0-4035 HOSE - DRAIN, CENTRAL WATER SYSTEM 38-12-00 301
38 CONTENTS
FOKKER 70/100
Amembcrof
Deutscne Aerospace

SET - MOUNTING, WASH WATER TUBING
(PIPE CUTTER)
F100-TEM-0404
Usage To install plastic and metal connections on polyethelene tubing of

the aircraft water and waste system.
Tool
consists of : A. Wrench
B. Wrench
C. Acorn pipe cutter
D. Case.
Effectivity : All.
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 401/402
38-00-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

HOSE - DRAIN, CENTRAL WATER SYSTEM
2000mm
(78,7in)
F100-TEM-0134
Usage To drain the central water system.

Parts list 1. Clamp FON2-7103-06 1 off
2. Plate 28-0-4035-05 1 off
3. Strap MS3367-5-9 1 off
4. Coupling 1041J12A 1 off
5. Hose 28-0-4035-03 1 off
Effectivity All.
Quanti ty 1 off.
Vendor code Part 4
code: 70347.
PAGE 301/302
38-12-00 SEP 01/94
FOKKER70/100

E E
LEP 1/2 NOV 01/09 R

49-00-00 001 SEP 01/94
49-00-00 002 SEP 01/94
49-00-00 501 SEP 01/94
49-00-00 502 SEP 01/94
49-00-00 503 NOV 01/09 N
49-00-00 504 NOV 01/09 N
49-10-00 401 SEP 01/94
49-10-00 402 SEP 01/94
49-10-00 403 SEP 01/94
49-10-00 404 SEP 01/94
Page 1/2
FOKKER70/100
TABLE OF CONTENTS
28-0-4652 STAND - APU BUILD-UP 49-00-00 001

833780-1 TEST SET - GTCP 36-150R ECU AND APU 49-00-00 501
28-0-4211 ADAPTOR - HOISTING, APU 49-00-00 503
28-0-3510 SLING - HOISTING, APU 49-10-00 402
49 CONTENTS
FOKKER 70/100
A member of
DeirtscneAerosMce

STAND - APU BUILD-UP
APU BUILD-UP
STAND
Usage To build-up a complete Fokker 100 APU (QECU)

Parts list 1. Sheet FON1-4311-20AA- I off
2. Bolt DIN912M6x20ZAA- II off
3. Bar FON1-1304-20AD- 2 off
4. Bar FON1-1304-40AD- 1 off
5. Sheet FON1-4311-25AA- 2 off
6. Bolt DIN963M4x8ZIAA- 4 off
7. Sheet FON1-4501-2AB- 2 off
8. Ball collar thrust
bearing 28-0-4652-12 4 off
9. Plate name FON7-1317A 1 off
10. Rivet FON2-6108-l-4x4 2 off
Effecti vi ty : Al1.
Quantity : 1 off.
PAGE 001/002
49-00-00 SEP 01/94
FOKKER 70/100
Afnembcr of
Deutsehe Aerospace

TEST SET - GTCP 36-150R ECU AND APU
300mm
(11,81 in)
F100-TEM-0308a
Usage : To functionally test and run the Garrett GTCP 36-150R APU, also
testing the ECU p/n 2118378-2 and 2118378-3.
DOCUMENTATION.
Effectivity : All.
Weight and
packaging : 1 metal case.
Quantity 1 off.
PAGE 501/502
49-00-00 SEP 01/94
FOKKER 70/100
jerof
Deutsche Aerospace
PAGE 401
49-10-00 SEP 01/94
FOKKER 70/100

ADAPTER - HOISTING, APU
SLING ADAPTOR
APU MOUNTING POINT
VIEW A
Usage To lift the APU from the transportation box.

Parts list 1. Sling adapter 28-0-4211-01 1 off
2. Pip pin 28-0-4211-09 1 off
3. Cable 28-0-4211-10 1 off
4. Pate-serial FoN7-1317A 2 off
Effectivity : All.
Weight and
Packing 1 case
Quantity 1 off.
PAGE 503/504
49-00-00 NOV 01/09
FOKKER 70/100
A member of
Deutsche Aerosoace

SLING - HOISTING, APU
MOO-TEM-0307
PAGE 402
49-10-00 SE? 01/94
FOKKER 70/100
Deutsche Aerospace

SLING - HOISTING, APU
Usage To l i f t the APU in or out of the enclosure of the aircraft. To be

used in conjunction with portable winch p/n 28-0-1738C or p/n
60-16.
Tool
consists of A. Hook assy 28-0-3510-06 1 off
6. Beam assy 28-0-3510-01 1 off
C. Transverse tube 28-0-3510-02 1 off
D. Webbing sling 28-0-3510-05 1 off
E. Top beam 28-0-3510-04 1 off
F. APU attachment frame 28-0-3510-03 1 off
Effectivity : All.
Weight and
packaging 50 kg (110 Ib), 1 aluminum case.
Quantity 1 off.
PAGE 403/404
49-10-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace


E E
LEP 1/2 SEP 01/94
51-50-00 601 SEP 01/94
51-50-00 602 SEP 01/94
51-50-01 601 SEP 01/94
51-50-01 602 SEP 01/94
51-90-00 401 SEP 01/94
51-90-00 402 SEP 01/94
51-90-00 601 SEP 01/94
51-90-00 602 SEP 01/94
51-90-00 603 SEP 01/94
51-90-00 604 SEP 01/94
51-90-00 605 SEP 01/94
51-90-00 606 SEP 01/94
51-90-01 601 SEP 01/94
51-90-01 602 SEP 01/94
51-90-01 801 SEP 01/94
51-90-01 802 SEP 01/94
51-91-00 601 SEP 01/94
51-91-00 602 SEP 01/94
PAGE 1/2
FOKKER 70/100
Amemberof
Deutsche Aerospace
TABLE OF CONTENTS

28-0-3886 FIXTURE - WING ALIGNMENT 51-50-00 601
28-0-3833 FIXTURE - ENGINE ALIGNMENT 51-50-01 601
28-0-1120 TRESTLE - FUSELAGE 51-90-00 401
2219T01 TOOL - SWAGING, CAPTIVE SCREW 51-90-00 402
28-0-1787B FIXTURE - ALIGNMENT 51-90-00 601
28-0-1788B FIXTURE - WING ALIGNMENT 51-90-00 602
28-0-1789D FIXTURE - WING ALIGNMENT 51-90-00 603
28-0-1270D FIXTURE - MAIN WHEEL ALIGNMENT 51-90-01 601
AN8501 ANITA CONSOLE - COMPOSITE REPAIR 51-90-01 801
28-0-3885 FIXTURE - HORIZONTAL STABILIZER ALIGNMENT 51-91-00 601
51 CONTENTS
FOKKER 70/100
A member of
oeutscne Aerospace

FIXTURE - WING ALIGNMENT
F100-TEM-0361
Usage : To measure the incidence and dihedral on the upper surface at wing
sta. 12510-12888.
Effectivity : ALL.
Weight and
packaging : 25.5 kg (56,1 Ib), 1 wooden box.
Quantity : 1 off.
PAGE 601/602
51-50-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

FIXTURE - ENGINE ALIGNMENT
F100-TEM-0360
Usage To check the horizontal alignment of the engine, used in

combination with a clinometer.
Tool
consists of A. Beam assy
B. Case
Effectivity All.
Quanti ty 1 off.
PAGE 601/602
51-50-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TRESTLE - FUSELAGE
VIEW A 2x
F100-TEM-0359
^zy ^*"
Usage : To support the aircraft when one or both wings are removed.
NOTE: 1. The trestle is delivered complete with two jacking pads
p/n 28-0-1119 (view A).
2. Tool is obtainable from Fokker on "Rental Base".
Effectivity : All.
Finish : Trestle is painted vista green with Skydrol resistance paint.
Quantity : 1 off.
PAGE 401
51 -90-00 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace
Part number : 2219T01

TOOL - SWAGING, CAPTIVE SCREW
10mm
(0,39in)
16mm
(0,6Sin)
8mm
(031m)
F100-TEM-0403
Usage To install the captive screw 2219S01-2BP,

Effactivity All.
Quantity 1 off.
Vendor code D0680.
PAGE 402
51-90-00
FOKKER 70/100
A member of
Deutsche Aerospace

FIXTURE - ALIGNMENT
F100-TEM-0135
Usage : To measure the incidence and dihedral on the upper surface at the
horizontal stabilizer sta. 728-1278.
Tool
B. Beam assy
C. Pin assy
D. Pin assy
E. Handnut
F. Bolt
G. Ring
H. Case
Effectivity : All.
Weight and
packaging : 1 case.
Quanti ty : 1 off.
PAGE 601
51-90-00 SEP 01/94
FOKKER 70/100
jerof
Deutsche Aerospace

F100-TEM-0136
sta. 2733-3198.
Tool
B. Beam assy
C. Pin assy
D. Pin assy
E. Handnut
F. Bolt
G. Ring
H. Case
Effectivity : All.
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 602
51-90-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

340mm
13,38in)
140mm
(5,51 in)
F100-TEM-0137
sta. 10470-11110.
Tool
B. Beam assy
C. Pin assy
D. Pin assy
E. Handnut
F. Bolt
G. Ring
H. Case
Effectivity : All.
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 603
51 -90-00 SE? 01/94
FOKKER 70/100
Deutscne Aerosoace

150mm
94in)
F100-TEM-0138
Usage To measure the incidence and dihedral on the upper surface at wing
sta. 4866-5441.
Tool
B. Beam assy
C. Pin assy
D. Pin assy
E. Handnut
F. Bolt
G. Ring
H. Case
Effectivity : All.
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 604
51-90-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

F100-TEM-0139
sta. 8452-8900.
Tool
B. Beam assy
C. Pin assy
D. Pin assy
E. Handnut
F. Bolt
G. Ring
H. Case
Effectivity : All.
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 605/606
51 -90-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

FIXTURE - MAIN WHEEL ALIGNMENT
160mm
(6,29 in)
F100-TEM-0158a
Usage : To check the alignment of the main wheel

Tool
consists of : A. Pin FON8-1403-6 4 off
B. Pin-dowel FON8-1402-6x24 4 off
C. Support assy 28-0-1270-01 2 off
D. Clamp assy 28-0-1270-35 1 off
E. Clamp assy 28-0-1270-27 2 off
F. Pin 3201-0411 1 off
G. Clamp assy 28-0-1270-34 1 off
H. Cord FON1-7951-1 2 off
J. Lanyard L10-T4-V 4 off
K. Plumball 28-0-1270-47 2 off
L. Leg assy 28-0-1270-06 4 off
M. Box 28-0-1270-49 1 off
N. Plumb line assy 28-0-1270-11 1 off
Effectivity : All.
Weight and
packaging 1 wooden box.
Quanti ty 1 off.
PAGE 601/602
51-90-01 SEP 01/94
FOKKER 70/100
oeutscne Aerospace
Part number : AN8501 ANITA

CONSOLE - COMPOSITE REPAIR
480mm
(18,9m)
F50-TEM-034?
Usage : To provide a controlled heat/vacuum source during the curing

process of carbon- and aramide fiber bonding repair.
DOCUMENTATION.
Effectivity : All.
Weight and
packaging : 24 kg (52,9 Ib), 1 case.
Quantity : 1 off.
PAGE 801/802
51-90-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

FIXTURE - HORIZONTAL STABILIZER ALIGNMENT
F100-TEM-0190
Usage To measuring incidence and dihedral on upper surface at horizontal

stabilizer STA. 4462.5-4660.
EQUIPMENT MANUAL, GEM-0124
Effectivity : All.
Weight and
packaging 13,5 kg (29,7 Ib) 1 Wooden box.
Quantity 1 off.
PAGE 601/602
51-91-00 SEP 01/94
FOKKER 70/100

E E
LEP 1/2 SEP 01/06 R

52-11-00 501 SEP 01/94
52-11-00 502 SEP 01/94
52-11-05 401 SEP 01/94
52-11-05 402 SEP 01/94
52-12-04 401 SEP 01/94
52-12-04 402 SEP 01/94
52-31-02 501 SEP 01/94
52-31-02 502 SEP 01/94
52-33-00 401 SEP 01/94
52-33-00 402 SEP 01/94
52-33-00 403 SEP 01/94
52-33-00 404 SEP 01/94
52-33-02 501 SEP 01/94
52-33-02 502 SEP 01/94
52-41-00 401 SEP 01/94
52-41-00 402 SEP 01/94
52-43-01 401 SEP 01/94
52-43-01 402 SEP 01/94
52-45-02 401 SEP 01/94
52-45-02 402 SEP 01/94
52-51-04 501 AUG 01/03
52-51-04 502 AUG 01/03
52-51-04 503 SEP 01/06 N
52-51-04 504 SEP 01/06 N
52-90-01 401 SEP 01/94
52-90-01 402 SEP 01/94
52-90-01 801 SEP 01/94
52-90-01 802 SEP 01/94
52-90-03 401 SEP 01/94
52-90-03 402 SEP 01/94
52-90-04 201 SEP 01/94
52-90-04 202 SEP 01/94
52-90-06 401 SEP 01/94
52-90-06 402 SEP 01/94
52-91-01 201 SEP 01/94
52-91-01 202 SEP 01/94
Page 1/2
FOKKER 70/100
TABLE OF CONTENTS
28-0-1761C SET - SPANNER 52-11-00 501

28-0-2256 PULLER - BEARINGS 52-11-05 401
27-1-3658 ADAPTER - TORQUE LOCKNUT 52-12-04 401
27-1-3663 ADAPTER - TORQUE LOCKNUT 52-12-04 402
28-0-2624 TOOL - ADJUSTMENT 52-31-02 501
28-0-4160 SLING - HOISTING ENLARGED CARGO DOOR 52-33-00 401
28-0-5289 PIN - REAR CARGO DOOR 52-33-00 402
28-0-5296 FRAME - INSTALLATION/REMOVAL REAR CARGO 52-33-00 403
DOOR
28-0-4806 SET - RIGGING PIN, ENLARGED CARGO DOOR 52-33-02 501
28-0-4416 SLING - HOISTING, SERVICE EMERGENCY DOOR 51-41-00 401
28-0-4902 JIG - SEAL INSTALLATION, AVIONICS BAY HATCH 52-43-01 401
28-0-4176 SET - MICROSWITCH ADJUSTMENT, SE DOORS 52-45-02 501
B221075T-1 TESTER – LATCH 52-51-04 501
B221513T-501 TOOL – BOLT ROTATION 52-51-04 502
HSK6263-11 TESTER – LATCH 52-51-04 503
HSK6263-13/-15 TOOL – BOLT ROTATION 52-51-04 504
28-0-4383 PULLER - CARGO DOOR HINGE-PINS 52-90-01 401
28-0-2403D SET - REAMER 52-90-01 801
28-0-2656 REAMER - MLG OUTBOARD DOOR HINGE 52-90-01 802
28-0-4465 SLING - HOISTING, PASSENGER DOOR 52-90-03 401
28-0-4320-01 RACK - SAFETY, FORWARD SE DOOR 52-90-04 201
28-0-4320-02 RACK - SAFETY, REAR SE DOOR 52-90-04 202
28-0-4571 SET - RIGGING PIN, PAX AND S/E DOOR LOCK 52-90-06 401
MECHANISM
28-0-1442E SET - SPANNER 52-91-01 201
28-0-2442B SET - SPANNER 52-91-01 202
52 CONTENTS
Page 1/2
SEP 01/06
FOKKER 70/100
Afnember of
oeutscne Aerospace

SET - SPANNER
62mm 62mm
(2.44inL
(2,44in)
175mm
(6,88in)
175mm
(6,88in)
B
F100-TEM-0143
Usage : To adjust the latch fittings of the passenger door.

Tool
consists of : A. Socket assy 28-0-1761-01 1 off
B. Socket assy 28-0-1761-02 1 off
Effectivity : For aircraft with a passenger door with integral stair only.
Quantity : 1 off.
PAGE 501/502
52-11 -00 SEP 01/94
FOKKER 70/100
Deuiscne Aerospace

PULLER - BEARINGS
102mm
(4,01 in)
152mm
(5,98in)
F100-TEM-OH4
Usage : To remove the bearings of the passenger door locking mechanism

with their support brackets.
2. Washer 28-0-2256-03 1 off
3. Bolt 28-0-2256-01 1 off
4. Body 28-0-2256-02 1 off
Effectivity : For aircraft with a passenger door with integral stair only.
Quantity : 1 off.
PAGE 401/402
52-11 -05 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

ADAPTER - TORQUE LOCKNUT
40 mm
(1,58 i
50 mm
(1,97 in)
VIEW A
VIEW B
F100-TEM-52003
Usage To remove/install and torque locknut FON6-9105S05.

Effactivity Only applicable for "plug-in" type passengers door.
Quantity 1 off.
PAGE 401
52-12-04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

ADAPTER - TORQUE LOCKNUT
44 mm
(1.73 in)
50 mm
(1.97 in)
VIEW B VIEW A
F100-TEM-52002
Usage To remove/install and torque locknut FON6-9105S06.

Effactivity Only applicable for "plug-in" type passengers door.
Quantity 1 off.
PAGE 402
52-12-04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

TOOL - ADJUSTMENT
F100-TEM-0147
Usage To measure the overcenter position of the overcenter link in the

cargo door. To be used with a vernier caliper.
Tool
consists of : A. Tool 28-0-2624-01 1 off
B. Tool 28-0-2624-02 1 off
Effectivity : For aircraft with small cargo doors only.
Quantity : 1 off.
PAGE 501/502
52-31-02 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

SLING - HOISTING ENLARGED CARGO DOOR
2155mm (85 in)
F100-TEH-0322
Usage : To hoist the enlarged cargo door.

Effectivity : For aircraft with enlarged cargo doors.
Quantity : 1 off.
PAGE 401
52-33-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

PIN - REAR CARGO DOOR
To lock the rear door in the itermediate position during aircraft

maintenance.
Effectivity For mark 0070 only.
Quantity 1 off.
PAGE 402
52-33-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

FRAME - INSTALLATION/REMOVAL, REAR CARGO DOOR
VIEW A
Usage : To assist installation/removal of the rear cargo door,

Effectivity : For mark 0070 only.
Quantity : 1 off.
PAGE 403/404
52-33-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

SET - RIGGING PIN, ENLARGED CARGO DOOR
80mm
(3.1 in)
F100-TEM-0367
Usage To rig the levers of the large cargo door during adjustment of the
locks and latches. (Fokker 70 only latches).
Tool
consists of A. Case 28-0-4806-28 1 off
B. Pin 28-0-4806-01 1 off
C. Pin 28-0-4806-02 1 off
D. Pin 28-0-4806-03 1 off
E. Pin 28-0-4806-04 1 off
F. Pin 28-0-4806-05 1 off
G. Pin 28-0-4806-06 1 off
H. Pin 28-0-4806-07 1 off
J. Pin 28-0-4806-08 1 off
K. Pin 28-0-4806-09 1 off
Effecti vi ty All.
Finish A caution flag must be attached to this tool
(Refer to chapter 20).
Weight and
packaging 1 case.
Quanti ty 1 off.
PAGE 501/502
52-33-02 SEP 01/94
FOKKER 70/100
A member of
DeutscneAeroswce

SLING - HOISTING, SERVICE EMERGENCY DOOR
150mm
(5.9 In)
75mm
(3.0 in}
F100-TEM-0366
Usage To hoist the service emergency doors during removal/installation.

Effectivity All.
Quanti ty 1 off.
PAGE 401/402
52-41-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

JIG - SEAL INSTALLATION, AVIONICS BAY HATCH
CLAMP
INSTALLATION
(TYP.)
VIEW A
F100-TEM-0400
Usage To assist in the installation of a new seal to the avionics bay

hatch.
Effectivity A/C with s/n 11242 thru 11367.
Quanti ty 1 off.
PAGE 401/402
52-43-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SET - MICROSWITCH ADJUSTMENT, SE DOORS
80mm
F100-TEM-0362
Usage To adjust the microswitch at the forward and rear service

emergency doors.
Tool
consists of A. Case assy 28-0-4176-40 1 off
B. Adjustment assy 28-0-4176-20 1 off
C. Wrench 28-0-4176-25 1 off
D. Wrench 28-0-4176-26 1 off
Effectivity : All.
Weight and
packaging Plastic case
Quanti ty 1 off.
PAGE 401/402
52-45-02 SEP 01/94
FOKKER70/100
ILLUSTRATEDTOOLANDEQUIPMENTMANUAL
Part number: B221075T-1

TESTER - DECOMPRESSION LATCH
Usage : To do a system checkout for the Pressure Relief Latch.

DOCUMENTATION.
NOTE: Use this tool in combination with Partnumber B221513T-501.
Effectivity : All.
Quantity : 1 off.
PAGE 501
52-51-04 AUG 01/03
FOKKER70/100
ILLUSTRATEDTOOLAND EQUIPMENT MANUAL
Part number: B221513T-501

TOOL - BOLT ROTATION
Usage : To rotate the bolt 90 degrees from the closed position to opened
position. And return the bolt to its closed position.
Parts list : FOR PARTS AND MAINTENANCE INFORMATION. REFER TO VENDOR

DOCUMENTATION.
NOTE: Use this tool in combination with Partnumber B221075T-1.
Effectivity : A l l .
Quantity : 1 off.
PAGE 502
52-51-04 AUG 01/03
FOKKER 70/100
Part number: HSK6263-11

TESTER – DECOMPRESSION LATCH
Usage : To do a system checkout for the Pressure Relief Latch.

DOCUMENTATION.
NOTE:
Use this tool in combination with Partnumber HSK6263-13/-15.
Effectivity : All.
Quantity : 1 off.
Packaging : Case
Vendor code : 4U783.
52-51-04
PAGE 503
SEP 01/06
FOKKER 70/100
Part number: HSK6263-13/-15

TOOL – BOLT ROTATION
Usage : To rotate the bolt 90 degrees from the closed position to opened
position. And return the bolt to its closed position.

DOCUMENTATION.
NOTE: Use this tool in combination with Partnumber HSK6263-11.
Effectivity : All.
Quantity : 1 off.
Vendor code : 4U783.
52-51-04
PAGE 504
SEP 01/06
FOKKER 70/100
Deutsche Aerospace

PULLER - CARGO DOOR HINGE-PINS
230mm
(9,06in) F100-TEM-0309a
Usage To remove the cargo-door hinge-pins.

Tool
consists of 1. Spindle, screw 28-0-4383-01 1 off
2. Block, hammering 28-0-4383-02 1 off
3. Plate, protection 28-0-4383-05 1 off
4. Box 28-0-4383-20 1 off
Effectivity : For aircraft with enlarged cargo doors only.
Weight and
packaging 3.8 kg (8,4 Ib), 1 wooden box.
Quanti ty 1 off.
PAGE 401/402
52-90-01 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

SET - REAMER
F100-TEM-0141
Usage For repair to the hinges of MLG inboard doors, passenger door,
forward and center cargo doors and rear cargo door. To be used
with a power drill, with a counterclockwise rotation.
Tool
consists of A. Pre-reamer 28-0-2403-01 1 off
B. Final reamer 28-0-2403-02 1 off
Effectivity For aircraft with pax door with integral stair and small cargo
doors only.
Quantity 1 off.
PAGE 801
52-90-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

REAMER - MLG OUTBOARD DOOR HINGE
F100-TEM-0142
Usage For repairs to the hinge of the main gear outboard doors. To be
used with a power drill, with a counterclockwise rotation.
Effectivity : All.
Quantity : 1 off.
PAGE 802
52-90-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SLING - HOISTING, PASSENGER DOOR
566mm
(22,3 in)
F100-TEM-0363
Usage : Hoisting the passenger door during removal or installation (only

applicable for "plug-in" type door).
Effectivity : All.
Weight and
packaging : 25 kg (56,1 Ib), 1 box.
Quantity : 1 off.
PAGE 401/402
52-90-03 SEP 01/94
FOKKER 70/100
A member of
DCUtSChe AGTOSD3C6
Part number : 28-0-4320-01

RACK - SAFETY, FORWARD SE DOOR
(TYR)
7M>min(2$1in)(TYP)
F100-TEM-0364
Usage To prevent injury to servicing personnel while the

service/emergency door (forward) is open or removed.
Parts list 1. Bracket 28-0-4320-26 1 off
2. Wing 28-0-4320-48 1 off
3. Bracket 28-0-4320-17 1 off
4. Bar 28-0-4320-13 1 off
5. Bracket 28-0-4320-18 1 off
6. Bracket 28-0-4320-25 1 off
7. Bar 28-0-4320-12 1 off
Effect!vity : All.
Quantity : 1 off.
PAGE 201
52-90-04 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace
Part number : 28-0-4320-02

RACK - SAFETY, REAR SE DOOR
(TYP)
740 mm (29,1) ITYP)
F100-TEM-0365
Usage To prevent injury to servicing personnel while the

service/emergency door (rear) is open or removed.
Parts list : 1. Bracket 28-0-4320-21 1 off
2. Wing 28-0-4320-48 1 off
3. Bracket 28-0-4320-20 1 off
4. Bar 28-0-4320-11 1 off
5. Bracket 28-0-4320-19 1 off
6. Bracket 28-0-4320-22 1 off
7. Bar 28-0-4320-10 1 off
Effectivity : All.
Quantity : 1 off.
PAGE 202
52-90-04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

SET - RIGGING PIN, PAX AND S/E DOOR LOCK MECHANISM
100mm
C3,9in)
520mm
380mm (20,4 in)
(15 in)
F100-TEM-0368
Usage To rig the pax and S/E doors latches during adjustment of the pax
and S/E doors lock mechanism.
Tool
B. Pin 28-0-4571-004 3 off
C. Pin 28-0-4571-003 1 off
D. Pin 28-0-4571-001 8 off
E. Pin 28-0-4571-005 2 off
Effectivity : All.
Finish A caution flag must be attached to this tool
(Refer to chapter 20.)
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 401/402
52-90-06 SEP 01/94
FOKKER 70/100
A member of
Deuocne Aerospace
Part number : 28-0-1442E

SET - SPANNER
FIOO-TEM-OU5
Usage To adjust the latch fittings of the forward and center cargo
doors.
Tool
consists of A. Spanner 28-0-1442-01 1 off
B. Spanner 28-0-1442-02 1 off
Effectivity For aircraft with small cargo doors only.
Quanti ty 1 off.
PAGE 201
52-91-01 SEP 01/94
FOKKER 70/100
Amamberof
oeutscne Aerosoace

SET - SPANNER
MOO-TEM-OU6
Usage To adjust the latch fittings of the rear cargo door.

Tool
consists of A. Spanner 28-0-2442-01 1 off
B. Spanner 28-0-2442-02 1 off
C. Spanner 28-0-2442-03 1 off
D. Spanner 28-0-2442-04 1 off
Effectivity : For aircraft with small cargo doors only.
Quanti ty : 1 off.
PAGE 202
52-91-01 SEP 01/94
FOKKER 70/100
Amemberof
DCUtSChe A6TOS03C6

E E
LEP 1/2 SEP 01/94
54-90-01 401 SEP 01/94
54-90-01 402 SEP 01/94
54-90-01 403 SEP 01/94
54-90-01 404 SEP 01/94
54-90-02 401 SEP 01/94
54-90-02 402 SEP 01/94
54-90-03 401 SEP 01/94
54-90-03 402 SEP 01/94
54-90-04 401 SEP 01/94
54-90-04 402 SEP 01/94
54-90-04 403 SEP 01/94
54-90-04 404 SEP 01/94
54-90-05 401 SEP 01/94
54-90-05 402 SEP 01/94
54-90-05 403 SEP 01/94
54-90-05 404 SEP 01/94
LEP CHAPTER 54 PAGE 1/2

SEP 01/94
FOKKER 70/100
Amemberof
DeutscneAerosoace
TABLE OF CONTENTS

28-0-3513 SLING - HOISTING 54-90-01 401
28-0-4224 RETAINER - SEAL SPRING 54-90-01 402
28-0-4226 TOOL - REMOVAL/INSTALL, REAR STUBWING SEAL 54-90-02 401
SPRING
28-0-4061 SLING - HOISTING, UPPER COWLING DOORS 54-90-03 401
28-0-4066 CART - RETAINING, UPPER AND LOWER COWLING 54-90-04 402
DOOR
28-0-4247 RETAINER - APRON 54-90-05 402
Page 1/2
FOKKER 70/100
A member of
Deutsche Aerosoace

SLING - HOISTING
200 mm
(7,87in)
1560 mm
(61,41 in) F100-TEM-0191
Usage To hoist the attachment beams with apron of the Rolls Royce
Tay 620-15 and Tay 650-15 engine.
Tool
B. Beam assy
C. Rod assy
D. Rod assy
E. Rod assy
F. Rod assy
Effectivity : All.
Weight and
packaging 1 case.
Quanti ty 1 off.
PAGE 401
54-90-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

RETAINER - SEAL SPRING
(3,74in)
F100-TEM-0192
Usage To retain the rear stubwing seal spring during engine or thrust
reverser removal or installation.
Tool
consists of A. Bush assy 28-0-4224-02 4 off
B. Shaft assy 28-0-4224-01 4 off
C. Hook-key 28-0-4224-07 1 off
D. Case 28-0-4224-16 1 off
Parts list Part A
1. Bush 28-0-4224-03 1 off
2. Ring 28-0-4224-05 1 off
Part B
1. Shaft 28-0-4224-04 1 off
2. Nut-round 28-0-4224-06 1 off
3. Ring-key 28-0-4224-08 1 off
4. Spring-cotter 28-0-4224-12 1 off
Effactivity All.
Finish A caution flag must be attached to this tool (refer to
chapter 20).
PAGE 402
54-90-01 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

RETAINER - SEAL SPRING
Weight and
packaging : 1 case.
Quantity : 1 off.
PAGE 403/404
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TOOL - REMOVAL/INSTALL, REAR STUBWING SEAL SPRING
225mm
(8,8 in)
F100-TEM-0369
Usage Used during removal and/or installation of the stubwing seal

springs.
Parts list 1. Case 28-0-4226-20 1 off
2. Clamp 28-0-4226-01 1 off
3. Threaded rod DIN975-A2-50M10 1 off
600 mm long
4. Clamp 28-0-4226-04 1 off
5. Bar 28-0-4226-05 1 off
6. Screw 28-0-4226-26 1 off
7. Washer DIN125A-10,5 BRASS 1 off
8. Ratchet handle 28-0-4226-10 1 off
Effectivity : All.
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 401/402
54-90-02 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aeroswce

SLING - HOISTING, UPPER COWLING DOORS
1770mm
(69.7m) 116 mm
(4.6in)
F100-TEM-0370
Usage : To remove/install the upper engine cowling.

Effectivity : All.
Weight and
Quantity 1 off.
PAGE 401/402
54-90-03 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
C A f\f\ f\ A PAGE
rHbt 401
1UJ.
54-90-04 SEP 01/94
FOKKER 70/100
Deutscne Aerospace

CART - RETAINING, UPPER AND LOWER COWLING DOOR
3572mm 1400mm
(140,6 in) (55,1in) F100-TEM-0371 VIEW C
PAGE 402
SEP 01/94
FOKKER 70/100
Deutscne Aerospace

CART - RETAINING, UPPER AND LOWER COWLING DOOR
Usage To retain and to transport the cowling doors,

Parts list 1. Dowel DIN7-6xl6 6 off
3. Washer DIN125-M6 30 off
4. Bracket 28-0-4066-134 1 off
5. Bolt DIN558-M6x30 6 off
6. Bar 28-0-4066-129 1 off
9. Pin 28-0-4066-49 4 off
10. Plate 28-0-4066-124 3 off
11. Webbing 28-0-4066-103 4 off
12. Towbar 28-0-4066-150 1 off
13. Rivet 28-0-4066-136 2 off
14. Plate-name 28-0-4066-135 1 off
15. Plate 28-0-4066-140 1 off
16. Tow-eye 28-0-4066-150 1 off
17. Bolt DIN558x40 4 off
18. Washer MS35338-50 4 off
20. Sheet-rubber 28-0-4066-122 A.R.
21. Frame 28-0-4066-102 1 off
22. Sheet-rubber 28-0-4066-131 A.R.
23. See item 19
25. See item 19
26. Sheet-rubber 28-0-4066-130 A.R.
27. Frame 28-0-4066-03 1 off
28. See item 5
29. See item 8
30. See item 9
31. Bar 28-0-4066-128 1 off
32. See item 8
33. See item 9
34. Pin-spring MS16562-49 5 off
35. Screw-shoulder 28-0-4066-51 2 off
36. Dowel DIN7-8x32 1 off
37. Bracket 28-0-4066-85 4 off
38. See item 2
39. See item 3
Effectivity : All.
Finish : Painted yellow with Skydrol resistant paint.
Quantity : 1 off.
PAGE 403/404
54-90-04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
PAGE 401
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

RETAINER - APRON
69mm
(2,71 in)
(8,62in)-
VIEW B
VIEW C
F100-TEM-0372
PAGE 402
54-90-05
FOKKER 70/100
A member of
Deutsctie Aerosoace

RETAINER - APRON
Usage : To retain the apron during engine removal/installation,

Parts list : 1. Fitting 28-0-4247-04 1 off
28-0-4247-03(opp) 1 off
2. Rigging-rear 28-0-4247-01 2 off
3. Rigging-front 28-0-4247-02 2 off
4. Case 28-0-4247-30 1 off
Effectivity : All.
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 403/404
54-90-05 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace


E E
LEP 1/2 SEP 01/94
55-20-00 401 SEP 01/94
55-20-00 402 SEP 01/94
55-20-00 501 SEP 01/94
55-20-00 502 SEP 01/94
55-90-00 501 SEP 01/94
55-90-00 502 SEP 01/94
LEP CHAPTER 55
PAGE 1/2
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
TABLE OF CONTENTS

28-0-4824 ADAPTER - TORQUE, LOCK NUT, ELEVATOR SUPPORT 55-20-00 401
28-0-4835 SET - ADAPTER, RUDDER SUPPORT BEARING 55-20-00 501
28-0-2567 TOOL - BEARING CHECKING 55-90-00 501
Page 1/2
FOKKER 70/100
A member of
Deutsche Aerosoace

ADAPTER - TORQUE, LOCK NUT, ELEVATOR SUPPORT
8mm F100-TEM-0382
(0.3in)
Usage : To torque the lock nut of the elevator support.

Effectivity : All.
Finish : The tool is colored black.
Quantity : 1 off.
PAGE 401/402
55-20-00 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SET - ADAPTER, RUDDER SUPPORT BEARING
F28-55-GE-1009
Usage To remove/install the lower rudder support bearing and the bearing
bush.
Tool
B. Adapter 28-0-4835-02 1 off
C. Case 28-0-4835-07 1 off
Effectivity : All.
Weight and
packaging : 1 case.
Quanti ty : 1 off.
PAGE 501/502
55-20-00 SEP 01/94
FOKKER 70/100
A member of
OeutscfieAerosoace

TOOL - BEARING CHECKING
135,5mm
(5,
130mm
(5,11 in)
F100-TEM-0157
Usage To measure play in the horizontal stabilizer bearings.

NOTE; To be used with locally supplied dial gauges
(0,01 m to 10 m).
Tool
consists of A. Tool 28-0-2567-01 1 off
B. Tool 28-0-2567-02 1 off
Parts list Parts A and B
1. Bolt 28-0-2567-08 1 off
2. Nut 28-0-2567-09 1 off
3. Bolt 28-0-2567-12 3 off
4. Bolt MS24694-55 2 off
5. Nut MS2104213 2 off
6. Bracket 28-0-2567-03 1 off
7. Plate 28-0-2567-07 1 off
Effactivity : All.
Quantity : 1 off.
PAGE 501/502
55-90-00 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoaee


E E
LEP 1/2 SEP 01/94
57-90-00 401 SEP 01/94
57-90-00 402 SEP 01/94
57-90-00 403 SEP 01/94
57-90-00 404 SEP 01/94
LEP CHAPTER 57
PAGE 1/2
SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace
TABLE OF CONTENTS

28-0-3730 SLING - OUTER WING HOISTING 57-90-00 402
57 CONTENTS
FOKKER 70/100
A member of
Deutsche Aerospace
PAGE 401
57-90-00 SEP 01/94
FOKKER 70/100
Deutscne Aerosoace

SLING - OUTER WING HOISTING
F100-TEM-OU8
PAGE 402
cv
O/- SEP 01/94
FOKKER 70/100
Amemberof
Deucscne Aerospace
Part number : 28-0-3730 Contfd

SLING - OUTER WING HOISTING
Usage To hoist the left or right hand outer wing.

Tool
consists of A. Bolt
B. Shackle
C. Atch assy-outboard
D. Atch assy-inboard
E. Atch assy-front 'A11
F. Atch assy-front 'B
G. Sling
H. Beam assy
I. Link
J. Sling
K. Wooden box
Effectivity : All.
Weight and
packaging 95 kg (209,2 Ib), 1 wooden box.
Quantity 1 off.
PAGE 403/404
57-90-00 SEP 01/94
FOKKER 70/100

E E
LEP 1/2 SEP 01/04 R 71-90-05 403 SEP 01/94

CONTENTS 1/2 SEP 01/04 R 71-90-05 404 SEP 01/94
CONTENTS 2/2 SEP 01/04 N 71-90-05 405 SEP 01/94
71-00-00 401 SEP 01/94 71-90-05 406 SEP 01/94
71-00-00 402 SEP 01/94 71-92-01 401 SEP 01/94
71-00-00 403 SEP 01/94 71-92-01 402 SEP 01/94
71-00-00 404 SEP 01/94 71-93-03 401 AUG 01/99
71-00-00 405 SEP 01/94 71-93-03 402 AUG 01/99
71-00-00 406 SEP 01/94 71-93-04 401 MAR 01/95
71-00-00 407 SEP 01/94 71-93-04 402 MAR 01/95
71-00-00 408 SEP 01/94 71-93-05 401 MAR 01/95
71-00-00 409 SEP 01/94 71-93-05 402 MAR 01/95
71-00-00 410 SEP 01/94 71-93-06 401 MAR 01/95
71-00-00 411 SEP 01/94 71-93-06 402 MAR 01/95
71-00-00 412 SEP 01/94 71-93-07 401 MAR 01/95
71-00-00 413 SEP 01/94 71-93-07 402 MAR 01/95
71-00-00 414 SEP 01/94 71-93-08 401 MAR 01/95
71-00-00 415 SEP 01/94 71-93-08 402 MAR 01/95
71-00-00 416 SEP 01/94 71-94-01 401 SEP 01/94
71-00-00 417 SEP 01/94 71-94-01 402 SEP 01/94
71-00-00 418 SEP 01/94 71-95-01 401 SEP 01/94
71-00-00 419 SEP 01/94 71-95-01 402 SEP 01/94
71-00-00 420 SEP 01/94 71-95-02 401 SEP 01/94
71-00-00 501 SEP 01/94 71-95-02 402 SEP 01/94
71-00-00 502 SEP 01/94 71-95-03 401 SEP 01/94
71-00-00 503 SEP 01/94 71-95-03 402 SEP 01/94
71-00-00 504 SEP 01/94 71-96-03 401 SEP 01/94
71-00-00 505 MAR 01/95 71-96-03 402 SEP 01/94
71-00-00 506 SEP 01/94
71-00-00 507 SEP 01/94
71-00-00 508 SEP 01/94
71-00-00 509 SEP 01/04 R
71-00-00 510 SEP 01/04 R
71-00-00 511 SEP 01/04 N
71-00-00 512 SEP 01/04 N
71-00-00 601 SEP 01/94
71-00-00 602 SEP 01/94
71-11-04 401 SEP 01/94
71-11-04 402 SEP 01/94
71-11-04 403 SEP 01/94
71-11-04 404 SEP 01/94
71-90-05 401 SEP 01/94
71-90-05 402 SEP 01/94
LEP CHAPTER 71
Page 1/2
SEP 01/04
FOKKER 70/100
TABLE OF CONTENTS
28-0-3697 SLING – COMPLETE ENGINE HOISTING 71-00-00 401

28-0-3515 ADAPTER – REAR, ENGINE HOISTING 71-00-00 402
28-0-3516 ADAPTER – FRONT, ENGINE HOISTING 71-00-00 403
28-0-3484 STAND – ENGINE BUILD UP 71-00-00 404
28-0-3508 FRAME – COMPLETE ENGINE HOISTING 71-00-00 410
28-0-3982B SET – TORQUE ADAPTER 71-00-00 412
28-0-4062 PULLER – CHATTERPROOF BOLT 71-00-00 414
GU28883-1 TOOL - INSTALLATION 71-00-00 415
GU28993 PANEL – INSPECTION 71-00-00 416
GU29773 EXTRACTOR – IMPACT, INTROSCOPE PLUG 71-00-00 417
GU30073 PIPE EXTRACTOR – FUEL BURNER FEED PIPES 71-00-00 418
HU30334 RETAINER – LP FAN BLADE 71-00-00 419
GU28875-1 SPANNER – KEY - ENGINE GROUND AND APPROACH 71-00-00 501
IDLE
GU28876-1 SPANNER – KEY - ENGINE GROUND AND APPROACH 71-00-00 502
IDLE
UT448-2 SPANNER – FUEL FLOW REGULATOR 71-00-00 503
UT707 SPANNER – FUEL FLOW REGULATOR 71-00-00 504
UT739 SPANNER – ADJUSTING, AIRFLOW CONTROL 71-00-00 506
REGULATOR AND ACTUATOR
GU21447-2 TOOL – RESET, LP SHAFT GOVERNOR 71-00-00 508
GU30622 SPANNER – DCU ADJUSTMENT 71-00-00 509
HU31282/1 SET – RIGGING PIN 71-00-00 510
UT594 PIN – RIGGING 71-00-00 511
1013714 SOCKET – WRENCH 71-00-00 512
GU28438 TOOL – SPECIAL, AIRFLOW CONTROL REGULATOR 71-00-00 601
28-0-3517 SLING – AIR INTAKE HOISTING 71-11-04 401
28-0-4237 TROLLEY – AIR INTAKE 71-11-04 402
28-0-4479 SLING – AIR INTAKE HOISTING 71-11-04 403
GU29492 GAUGE – SETTING, BLEED VALVE SENSING-SWITCH 71-90-05 401
TH TH
UT1508 CABLE - CONTINUITY CHECK, 7 /12 STAGE 71-90-05 405
BLEED VALVE
CP27913 COVER – MVP - ENGINE 71-92-01 401
CP30596-4 STAND – ENGINE TRANSIT 71-93-03 401
CP30597 GUARD – FRONT, ENGINE TRANSPORTATION 71-93-04 401
TROLLEY
CP30598-3 GUARD – REAR, ENGINE TRANSPORTATION TROLLEY 71-93-05 401
CP30599-1 GUARD – FRONT, ENGINE TRANSPORTATION 71-93-06 401
TROLLEY
CP30604 SUPPORT – REAR, ENGINE TRANSPORTATION 71-93-07 401
TROLLEY
CP30608 TOWBAR – ENGINE TRANSPORTATION TROLLEY 71-93-08 401
CP30616-2 STAND – ENGINE DRESSING 71-94-01 401
CP30626 SET – ADAPTER, QECU TRANSPORTATION TROLLEY 71-95-01 401
CP30627 GUARD – FRONT, QECU TRANSPORTATION TROLLEY 71-95-02 401
CP30628 GUARD – REAR, QECU TRANSPORTATION TROLLEY 71-95-03 401
71 CONTENTS Page 1
SEP 01/04
FOKKER 70/100
Deutscne Aerosoace

SLING - COMPLETE ENGINE HOISTING
F100-TEM-OU9a
Usage : To lift or lower the Rolls Royce TAY engine with or without air
intake and/or thrust reverser.
Tool
B. Link
C. Shackle
D. Cable assy (lifting without thrust reverser)
E. Cable assy (lifting with thrust reverser)
F. Shackle
G. Shackle
H. Cable assy
Effect!vity : All.
Weight and
Quanti ty : 1 off.
PAGE 401
71-00-00
FOKKER 70/100
A member of
Deutscne Aerospace

ADAPTER - REAR, ENGINE HOISTING
ENGINE HOISTING SLING
(REF)
181.4mm
(7.14 i n )
VIEW A
23mm
(0.91 i n )
F100-TEM-0150a
Usage : To permit hoisting of the Rolls Royce TAY engine.

EQUIPMENT MANUAL, GEM 0137. .
Effectivity : All.
Quanti ty : 1 off.
PAGE 402
71 -00-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

ADAPTER - FRONT, ENGINE HOISTING
ENGINE HOISTING SLING
(REF)
VIEW A
150mm
(5.91in)
F100-TEM-0151a
Usage To permit hoisting of the Rolls Royce TAY engine.

Effectivity All.
Quantity 1 off.
PAGE 403
71-00-00 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

STAND - ENGINE BUILD UP
2300mm
(90,55in)
F100-TEM-0152Q
PAGE 404
71 -00-00 SEP 01/94
FOKKER 70/100
Deutscne Aerospace

Usage : To build up and transport the Rolls Royce Tay engine.

Parts list : 1. Tape - warning 28-0-3484-114 AR
2. Tape - warning 28-0-3484-115 AR
3. Ring - retaining MS16624-1055 12 off
4. Pin 28-0-3483-81 6 off
5. Nut DIN6331M14 6 off
6. Eyebolt DIN444M1X130 6 off
7. Pin 28-0-3484-111 4 off
8. Plate 28-0-3484-86 5 off
9. Pin FON2-6108-14-4 10 off
10. Bolt 28-0-3484-36 1 off
11. Nut 28-0-3484-37 1 off
12. Pin FON8-1402-10x40 2 off
14. Bracket 28-0-3483-32 1 off
15. Beam assy 28-0-3484-25 1 off
16. Pin 28-0-3484-112 2 off
17. Trunnion assy CP30548/2 1 off
18. Trunnion assy CP30600/1 1 off
19. Bolt DIN603M10xlOAA 16 off
20. Nut DIN934M10-6ZAA 20 off
21. Bolt DIN912M10x30AC 4 off
22. Jack screw 28-0-3484-127 1 off
23. Wood 28-0-3484-122 2 off
24. Hub GK56K 4 off
25. Rim 28-0-3484-99 4 off
26. Tyre 28-0-3484-100 4 off
27. Pin 28-0-3484-49 1 off
28. Pin MS16562-63 1 off
29. Plate 28-0-3484-52 1 off
30. Towbar 28-0-3484-41 1 off
31. Bolt 28-0-3483-78 10 off
32. Nut FON8-1201M20 10 off
33. Washer 28-0-3484-79 10 off
34. Rod-end bearing 28-0-3484-95 5 off
35. Rod-end bearing 28-0-3484-96 5 off
36. Bar 28-0-3484-58 4 off
37. Bar assy 28-0-3484-55 1 off
38. Nut 28-0-3484-103 5 off
39. Nut 28-0-3484-104 5 off
•41. Pin 28-0-3484-77 6 off
42. Washer 28-0-3484-80 6 off
43. Axle 28-0-3484-70 2 off
44. Axle 28-0-3484-75 2 off
45. Bearing 28-0-3484-106 8 off
46. Bearing 28-0-3484-107 4 off
47. Bolt DIN912M8x40AB 2 off
48. Screw 28-0-3484-90 4 off
PAGE 405
71 -00-00 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

23
15
VIEW A
F100-TEM-0153
PAGE 406
71-00-00
FOKKER 70/100
A member of
Deutsche Aerosoace

VIEWD
52'
VIEWE
VIEWF
F100-TEM-0154
PAGE 407
71-00-00 SEP
FOKKER 70/100
Deutsoie Aerospace

F100-TEM-0155
PAGE 408
71 -00-00 SE? 01/94
FOKKER 70/100
DeutscfteAerosoace

49. Beam assy 28-0-3484-60 1 off

50. Plate 28-0-3484-83 2 off
51. Screw MS21318-29 20 off
52. Chassis 28-0-3484-01 1 off
Effectivity All.
Quantity 1 off.
PAGE 409
71 -00-00 SEP 01/94
FOKKER 70/100
oeutscneAerosoace

FRAME - COMPLETE ENGINE HOISTING
F100-TEM-0310Q
PAGE 410
71 -00-00 SEP §1/94
FOKKER 70/100
^ jerof
Deutschc AerosD3C6

FRAME - COMPLETE ENGINE HOISTING
Usage : To hoist the complete Rolls Royce Tay engine.

Weight and
packaging : 325 kg (716 Ib)
Wooden case 1600x660x500 mm (63,1x26,1x20,1 in) 2 off
Wooden case 2120x320x270 mm (83,5x13,1x11,0 in) 1 off
Quantity : 1 off.
PAGE 411
71 -00-00 SEP
FOKKER 70/100
A member of
Deutscne Aerospace

F100-TEM-OWb
PAGE 412
71 -00-00 SE? 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

Usage Used during the removal/installation of the main trunnion bolt.

Tool
consists of A. Socket assy 28-0-3982-01 1 off
B. Wrench assy 28-0-3982-06 1 off
C. Wrench 28-0-3982-19 1 off
D. Box 28-0-3982-15 1 off
Parts list Part A
1. Screw-countersink 28-0-3982-05 4 off
2. Cover 28-0-3982-04 1 off
3. Socket-peg 28-0-3982-03 1 off
4. Housing 28-0-3982-02 1 off
Part B
1. Ring MS16624-1150 2 off
2. Bar-square 28-0-3982-09 1 off
3. Bar-extension 28-0-3982-07 1 off
Effectivity : All.
Weight and
packaging 14.2 kg (31,24 Ib), 1 metal box.
Quantity 1 off.
PAGE 413
71-00-00 SEP 01/94
FOKKER 70/100
Oeutscne Aerospace

PULLER - CHATTERPROOF BOLT
VIEW A
F100-TEM-0193 b
Usage To remove the chatterproof bolt from the engine mounting on the
Rolls Royce Tay engine.
Tool
consists of A. Pin assy 28-0-4062-08 1 off
B. Puller assy 28-0-4062-02 1 off
C. Case 28-0-4062-14 1 off
Parts list Part B
1. Body 28-0-4062-05 1 off
2. Extractor 28-0-4062-06 1 off
3. Nut 28-0-4062-07 1 off
4. Washer AN96OC1016 1 off
5. Pin-spring FON2-5110A20 1 off
Effectivity : All.
Weight and
packaging 1 case.
Quanti ty 1 off
PAGE 414
71 -00-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace
Part number : GU28883-1

TOOL - INSTALLATION
75941A
Usage : To fit and remove the engine mount tapered pins.

Effectivity : All.
Quantity : 1 off.
PAGE 415
nn
-UU SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace
Part number : GU28993

PANEL - INSPECTION
70mm
(2,7 in)
40mm
(1,6 in)
F100-TEM-RR-75952
Usage To enable inspection of the engine core.

DOCUMENTATION.
Effectivity : All.
Quantity 1 or 2 off.
PAGE 416
71-00-00
FOKKER 70/100
A member of
Deutsche Aerosoace

EXTRACTOR - IMPACT, INTROSCOPE PLUG
1
^f.
32 mm
(1.3 in)
GD
A1143
Usage : To remove the LP 1 and LP 3 introscope plugs.

Effectivity : All.
Quantity : 1 off.
PAGE 417
71 -00-00 SEP 01/94
FOKKER 70/100
jerof
DCUtSCftC AGTOSD9C6
Part number : 61)30073

PIPE EXTRACTOR - FUEL BURNER FEED PIPES
46mm
(1.8in)x
A1721
Usage : To remove the fuel burner fuel pipes.

Tool
consists of : 1. Location block
2. Handle
Effectivity : Aircraft, fitted with Rolls Royce Tay 650-15 engines only.
Quantity : 1 off.
PAGE 418
71 -00-00 sSoi/94
FOKKER 70/100
Deutscfie Asrosodce
Part number : HU30334

RETAINER - LP FAN BLADE
VIEW B VIEW A F100-TEM-0405
Usage To retain the LP fan blades during blade changes.

Effectivity All.
Quantity 1 off.
Vendor code K0680.
PAGE 419/420
71 -00-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

SPANNER - KEY, ENGINE GROUND AND APPROACH IDLE
10mm
15 mm
(0,6 in)
70mm
(2,8 in)
4JJ
——— ^ -*S%^7ji I
F100-TEM-RR-75936
Usage : To adjust engine ground and approach idle. To be used with p/n
GU28876-1.
Effectivity : All.
Quantity : 1 off.
-7-1 PAGE 501

/ I- SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : 6U28876-1

SPANNER - KEY, ENGINE GROUND AND APPROACH IDLE
18mm
(0,8 m)
70mm
(2,8 m)
F100-TEM-RR-75937
Usage To adjust engine ground and approach idle. To be used with p/n
GU28875-1.
Effectivity : All.
Quanti ty 1 off.
PAGE 502
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : UT448-2

SPANNER - FUEL FLOW REGULATOR
MAXIMUM
HP RPM
F100-TEM-RR-75911B
Usage To adjust P3 limiter and maximum HP rpm.

Effectivity All.
Quanti ty 1 off.
Vendor code K0680.
PAGE 503
71 -00-00 SE? oim
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : UT707

10mm
(0,4in)
A.C.U
F100-TEM-RR-75917 B
PAGE 504
71 -00-00 SEP 01/94
FOKKER 70/100
Amemberof
Deutsche Aerospace
Part number : UT707 Cont'd

Usage : To adjust ACU and max RPM (Rolls-Royce Tay 620-15 and 650-15). To
adjust DCU only (Rolls-Royce Tay 620-15).
| Effectivity : For mark 0100 only.
Quantity : 1 off.
KMfat
PAGE DU3
nn nn
-UU-UU
505
MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace
Part number : UT739

SPANNER - ADJUSTING, AIRFLOW CONTROL REGULATOR AND ACTUATOR
64mm
16mm
(0,7 in)
F100-TEM-RR-75877A
PAGE 506
71 -00-00 SEP Di/5
FOKKER 70/100
Deutsche Aerospace
Part number : UT739 Cont'd

SPANNER - ADJUSTING, AIRFLOW CONTROL REGULATOR AND ACTUATOR
Usage : To adjust airflow control regulator.

Effect!vity : All.
Quantity : 1 off.
PAGE 507
-7-1 nn nn
/1-UU-UU SEP 01/94
FOKKER 70/100
A member of
DcutschB AWOS0X6

TOOL - RESET, LP SHAFT GOVERNOR
Usage : To reset LP shaft governor. To be used with p/n UT501

Effect!vity : All.
Quantity : 1 off.
PAGE 508
71-00-00
FOKKER 70/100

SPANNER – DCU ADJUSTMENT
Usage : To adjust DCU only.
Effectivity : For mark 0100 fitted with Rolls-Royce Tay 650-15.

For mark 0070 all.
Quantity : 1 off.
71-00-00
PAGE 509
SEP 01/04
FOKKER 70/100
Part number : HU31282/1

SET – RIGGING PIN
Usage : To adjust Control quadrant gear.
Effectivity : All.
Quantity : 1 off.
71-00-00
PAGE 510
SEP 01/04
FOKKER 70/100
Part number : UT594

PIN – RIGGING
Usage : To adjust Fuel flow regulator.
Effectivity : All.
Quantity : 1 off.
71-00-00
PAGE 511
SEP 01/04
FOKKER 70/100

SOCKET – WRENCH
Usage : To remove and instal the bolts from the nose cone fairing.
Effectivity : All.
Quantity : 1 off.
71-00-00
PAGE 512
SEP 01/04
FOKKER 70/100
Deutsche Aerospace

TOOL - SPECIAL, AIRFLOW CONTROL REGULATOR
94mm
(3,7 in)
435 mm
(17,1 in)
F100-TEM-RR-75918 B
Usage To set the microswitch and to open the compressor swirl vane for
compressor inspection.
Effectivi ty All.
Quanti ty 1 off.
Vendor code K0680.
PAGE 601/602
71 -00-00 SEP 01/94
FOKKER 70/100
Deutscne Aerospace

SLING - AIR INTAKE HOISTING
424,5 mm
(16,70 in)
788
(31,
F100-TEM-0321
Usage : To hoist the engine air intake.

Effectivity : Aircraft with Rolls-Royce TAY 620-15 engines only.
Weight and
Quantity : 1 off.
PAGE 401
71-11-04 SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

TROLLEY - AIR INTAKE
2500mm
(98,4 i n )
F100-TEM-0324
Usage : To transport the engine air intake.

Effectivity : Aircraft with Rolls-Royce 620-15 and 650-15 engines.
Finish : The trolley is colored yellow.
Weight and
Quantity : 1 off.
PAGE 402
71-11-04 SEP 01/94
FOKKER 70/100
Amemberof
OCUTSChC AfiTOSD3CS

SLING - AIR INTAKE HOISTING
424,5 mm
(16,70 in)
(31
F100-TEM-0321
Usage : To hoist the engine air intake.

Effectivity : Aircraft with Rolls-Royce 650-15 engines only.
Weight and
Quantity 1 off.
PAGE 403/404
71-11-04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

GAUGE - SETTING, BLEED VALVE SENSING-SWITCH
75939A
Usage : To set the bleed valve sensing-switch. To be used with p/n GU29493
and p/n HCU4668.(PRE - ROLLS ROYCE SB 36-1325).
Effectivity : All.
Quantity : 1 off.
PAGE 401
71 -90-05 SEP aim
FOKKER 70/100
Deutsche Aerospace

13mm
(0.5m)
40mm
(1.6 in)
75938A
Usage To set the bleed valve sensing-switch. To be used with p/n GU29492
and p/n HCU4668.(PRE - ROLLS ROYCE SB 36-1325).
Effectivity : All.
Quantity : 1 off.
"7 A f\f\ f\C PAGE

KMbt 402
HU£
71-90-05 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

*-W
Usage : To set the bleed valve sensing-switch. To be used with p/n

GU23879, HCU4668 and p/n UT1508.(POST - ROLLS ROYCE SB 36-1325).
Effectivity : All.
Quantity : 1 off.
PAGE 403
71 -90-05 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

Usage To set the bleed valve sensing-switch. To be used with p/n

GU23880, HCU4668 and p/n UT1508.(POST - ROLLS ROYCE SB 36-1325).
Effect!vity : All.
Quantity : 1 off.
PAGE 404
71-90-05 SEP 01/94
FOKKER 70/100
A member of
Deutscfic Aeroso3ce
Part number : UT1508

CABLE - CONTINUITY CHECK
150mm
(Sin)
Usage To do a continuity check of the 7th/12th stage bleed valve.To be

used with p/n GU32879 and GU32880 (POST ROLLS-ROYCE SB 36-1325).
Effactivity All.
Quanti ty 1 off.
Vendor code K0680.
PAGE 405/406
71-90-05 SEP 01/94
FOKKER 70/100
Deutsche Aerospace
Part number : CP27913

COVER - MVP - ENGINE
F100-TEM-RR-75947
Usage : For transportation of engine. To be used with p/n CP30596-2.

Effectivity : All.
Quantity : 1 off.
PAGE 401/402
71-92-01 SEP 01/94
FOKKER70/100
Part number : CP30596-4

STAND - E N G I N E TRANSIT
Usage : For transportation of the engine. To be used with p/n CP30597,

CP30598-3, CP30599-1, CP30604. and CP30863.
DOCUMENTATION.
Effectivity : All.
Weight and
packaging 870 kg, 3375x1672x1630 mm (132,9x65,8x64,2 i n ) .
Quantity 1 off.
Vendor code K0680.
PAGE 401/402
71-93-03 AUG 01/99
FOKKER 70/100
Amemberof
Deutsche Aerospace

GUARD - FRONT, ENGINE TRANSPORTATION-TROLLEY
1643mm
1 (64.7 in)
865mm
(34.1 in)
3.4.5 75848A
| Usage For transportation of the engine. To be used with p/n CP30596-4.

DOCUMENTATION.
Effectivity All.
Quanti ty 1 off.
Vendor code K0680.
PAGE 401/402
MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerospace

GUARD - REAR, ENGINE TRANSPORTATION TROLLEY
1643 mm
(64.7 in)
1095mm
143.1 in)
I Usage For transportation of the engine. To be used with p/n CP30596-4.

DOCUMENTATION.
Effectivity : All.
Quantity 1 off.
71-93-05
PAGE 401/402
MAR 01/95
FOKKER 70/100
Ametnberof
Deutsche Aerospace

SUPPORT - REAR, ENGINE TRANSPORTATION TROLLEY
1260mm
(49.6 in)
76 mm
(3.0 in)
5,6,7,8,
9,10
75868B
Usage : For transportation of the engine. To be used with p/n CP30596-4

and appropriate engine sling.
DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
71 -93-06 MAR 01/95
FOKKER 70/100
Amemberof
Deutsche Aerospace

SLING - TOP FRAME HOISTING, ENGINE TRANSPORTATION TROLLEY
175mm
(6.9 in
Refer to CP 30596/2
75850B
Usage To lift the top frame of the transit stand. To be used with p/n
CP30596-4.
DOCUMENTATION.
Effect!vi ty All.
Quantity 1 off.
Vendor code K0680.
PAGE 401/402
71 -93-07 MAR 01/95
FOKKER 70/100
Ametnberof
Deutsche Aerospace

TOWBAR - ENGINE TRANSPORTATION TROLLEY
693mm
3 in)
525mm
(20,7 in)
F100-TEM-RR-75852A
| Usage For transportation of the engine. To be used with p/n CP30596-2.

DOCUMENTATION.
Effactivity All.
Quantity 1 off.
Vendor code K0680.
PAGE 401/402
71 -93-08 MAR 01/95
FOKKER 70/100
A member of
Deutsche Aerosoace

STAND - ENGINE DRESSING
1591mm
(62,7 in)"
2327 mm
(91,6 in)
F100-TEM-RR- 75953
Usage : Engine with nose cowl and jet pipe.

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
71-94-01 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace

SET - ADAPTER, QECU TRANSPORTATION TROLLEY
F100-TEM-RR- 75950
Usage : Transit stand (quick engine change unit (QECU)).

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
71-95-01 SEP 01/94
FOKKER 70/100
Amwnber of
Deutsche Aerosoace

GUARD - FRONT, QECU TRANSPORTATION TROLLEY
1309mm
(51,6 in)
932mm
(36,7 in)
1642mm
(64,7 in)
F100-TEM-RR-75948
Usage : Quick Engine Change Unit (QECU).

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
71 -95-02 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

GUARD - REAR, QECU TRANSPORTATION TROLLEY
913mm
(36,0 in)
2458 mm 1692mm
(96,8 in) (66,7 in) F100-TEM-RR-75949
Usage : Quick Engine Change Unit (QECU).

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
71-95-03 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : RY31020A

ADAPTER - INLET, POWER PLANT
105mm
(4,2 in)
F100-TEM-RR-75863A
Usage Preservation, to be used with p/n U999067 and p/n 3409702.

Effectivity All.
Quantity 1 off.
Vendor code K0680.
PAGE 401/402
71 -96-03 SEP 01/94
FOKKER 70/100

E E
LEP 1/2 SEP 01/06 R

72-01-01 401 SEP 01/94
72-01-01 402 SEP 01/94
72-01-02 401 SEP 01/94
72-01-02 402 SEP 01/94
72-30-00 701 SEP 01/06 N
72-30-00 702 SEP 01/06 N
72-31-12 601 SEP 01/06 N
72-31-12 602 SEP 01/06 N
72-90-01 401 SEP 01/94
72-90-01 402 SEP 01/94
72-90-01 403 SEP 01/94
72-90-01 404 SEP 01/94
LEP CHAPTER 72
Page 1/2
SEP 01/06
FOKKER 70/100
TABLE OF CONTENTS
HU2942 EXTRACTOR – OIL PUMP ASSEMBLY 72-01-01 401

HU2648 PULLER – OIL PUMP ASSY 72-01-02 401
RX44487 CAP – BLANKING, GROUND RUNNING 72-30-00 701
C7304 PROBE – DIFFERENTIAL, EDDY CURRENT 72-31-12 601
QC6847 TEST PIECE – WITH 0,75 MM CALIBRATION SLOT 72-31-12 602
GU28767 TOOL – BLADE RETENTION, LP FAN BLADE 72-90-01 401
GU30411 EXTRACTOR – IDG DRIVESHAFT 72-90-01 402
GZ39246 SET – BLANKING, FUEL SYSTEM EJECTOR PUMP 72-90-01 403

SEP 01/06
FOKKER 70/100
A member of
Deutsche Aerosoace

EXTRACTOR - RELIEF VALVE HOUSING
52350
Usage To remove relief valve housing.

Effactivity All.
Quanti ty 1 off.
Vendor code K0680.
PAGE 401/402
72-01-01 SEP 01/94
FOKKER 70/100
A member of
Deutscne Aerospace

PULLER - OIL PUMP ASSY
77mm
(3.0m)
8 A mm
(3.3m )
31mm
(1.2m)
75853
Usage To remove the scavenge oil strainers.
DOCUMENTATION.
Effectivity : All.
Quanti ty : 1 off.
PAGE 401/402
72-01-02 SEP 01/94
FOKKER 70/100
Part number : RX44487

CAP – BLANKING, GROUND RUNNING
Usage : To blank the disconnected 12th and 7th stage bleed-air duct.
Effectivity : All.
Quantity : 2 off.
Vendor code : K0680
72-30-00
PAGE 701
SEP 01/06
FOKKER 70/100
72-30-00
PAGE 702
SEP 01/06
FOKKER 70/100
Part number : C7304

PROBE – DIFFERENTIAL EDDY CURRENT (2MHz)
Usage : To do a Eddy Current Inspection of the LP-Compressor Fan-Blade

Leading Edge.
Effectivity : All.
Quantity : 1 off.
Vendor code : K0680
72-31-12
PAGE 601
SEP 01/06
FOKKER 70/100
Part number : QC6847

TEST PIECE – WITH 0,75 MM CALIBRATION SLOT
Usage : To be used with the Eddy Current tool C7304.
Effectivity : All.
Quantity : 1 off.
Vendor code : K0680
72-31-12
PAGE 602
SEP 01/06
FOKKER 70/100
Amemberof
oeutscne Aerospace

TOOL - BLADE RETENTION, LP FAN BLADE
A1722
Usage : LP fan blade change.

Effect!vity : All.
Quantity : 1 off.
PAGE 401
72-90-01 SEP 01/94
FOKKER 70/100
Deutscne Aerospace

EXTRACTOR - IDG DRIVESHAFT
165mm
(6.5in)
A1698
Usage : To remove spline bush.
Effect!vity : All.
Quantity : 1 off.
PAGE 402
72-90-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace
Part number : GZ39246

SET - BLANKING, FUEL SYSTEM EJECTOR PUMP
1,77mm
(0.7in)
,03mm
(0.8m)
52344
Usage : Vibration investigation purposes.
Effectivity : All.
Quantity : 1 off.
PAGE 403 404

TO nn nn
72-90-01
/
SEP 01/94
FOKKER 70/100
A member of
oeutseneAerosoace


E E
LEP 1/2 SEP 01/94
73-00-00 501 SEP 01/94
73-00-00 502 SEP 01/94
73-11-03 401 SEP 01/94
73-11-03 402 SEP 01/94
73-11-05 401 SEP 01/94
73-11-05 402 SEP 01/94
PAGE 1/2
FOKKER 70/100
A member of
Deutsche Aerospace
TABLE OF CONTENTS
'PART NUMBER KEYWORD AND PART DESCRIPTION CH-SE-SU PAGE
UT501 SPANNER - LP SHAFT GOVERNOR 73-00-00 501
HU3233-1 PULLER - FUEL FLOW TRANSMITTER 73-11-03 401
HU8506-1 PULLER - ELBOW DOWEL 73-11-05 401
73 CONTENTS
FOKKER 70/100
A member of
oeutscneAerosoace
Part number : UT501

SPANNER - LP SHAFT GOVERNOR
115mm
(4,5 in)
9mm
(0,4 in)
F100-TEM-RR-75845A
Usage : To adjust the LP shaft governor. To be used with p/n GU21447-2.

DOCUMENTATION.
Effect!vity : All.
Quantity : 1 off.
PAGE 501/502
73-00-00 SEP 01/94
FOKKER 70/100
lerof
Deutsche Aerosoace
Part number : HU3233-1

PULLER - FUEL FLOW TRANSMITTER
45 mm
74 m m
(2,9 in)
F100-TEM-RR-75876A
Usage : To remove transfer tubes, LP fuel filter to flowmeter.

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE
-70 44 HO
/O-1 I-UO SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : HU8506-1

PULLER - ELBOW DOWEL
23mm
(0,9in) F100-TEM-RR- 75875
Usage : To remove el bow dowel.

DOCUMENTATION.
Effectivity : All.
Quantity : 1 off.
PAGE 401/402
73-11 -05 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aeroswee


E E
LEP 1/2 SEP 01/94
75-32-30 501 SEP 01/94
75-32-30 502 SEP 01/94
75-32-30 503 SEP 01/94
75-32-30 504 SEP 01/94
75-91-01 601 SEP 01/94
75-91-01 602 SEP 01/94
75-91-01 603 SEP 01/94
75-91-01 604 SEP 01/94
LEP CHAPTER 75
PAGE 1/2
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace
TABLE OF CONTENTS

GU28144 TOOL - LEVER, HP AIR BLEED VALVE 75-32-30 501
HU3855 SOCKET - HP AIR BLEED VALVE 75-32-30 502
HCU4668 HANDLE - GAUGE, BLEED VALVE SENSING 75-32-30 503
SWITCH
UT1451-4 SENSOR - IGV POSITION 75-91-01 601
UT1368-1 SENSOR - PLA POSITION 75-91-01 602
UT1428-1 BRACKET - SYNCHRO MOUNTING 75-91-01 603
75 CONTENTS
FOKKER 70/100
Deutsche Aerospace

TOOL - LEVER, HP AIR BLEED VALVE
132mm
(5,2 in)
F100-TEM-RR-75788A
Usage : To check the loading of the HP air bleed valve.

Effectivity : All.
Quantity : 1 off.
PAGE 501
75- SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

SOCKET - HP AIR BLEED VALVE
F100-TEM -RR-75919/1
Usage : To torque tighten the bleed valve operating lever assembly.

Effect!vity : All.
Quantity : 1 off.
PAGE 502
SEP 01/94
FOKKER 70/100
Deutscne Aerospace
Part number : HCU4668

HANDLE - GAUGE, BLEED VALVE SENSING SWITCH
F100-TEM-RR-75940
Usage : Bleed valve sensing switch. To be used with p/n 6U29492 and p/n
GU29493
Effectivity : All.
Quantity : 1 off.
PAGE 503/504
75-32-30 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SENSOR - IGV POSITION
TOOL
MUST BE
REMOVED
AFTER USE
VIEW A
Usage Measurement of the IGV angle position.

DOCUMENTATION.
Effectivity : All.
Weight and
packaging : 1 case (p/n UT1500) 310x280x100 mm (12,2x11x3,9 in).
Quantity : 1 off.
PAGE 601
QH OH
-y l-Ul SEP 01/94
FOKKER 70/100
Amernber of
DeutscneAerosoace

SENSOR - PLA POSITION
Usage : Measurement of the PLA position. To be used with p/n UT1339-2 and
p/n UT1366.
DOCUMENTATION.
Effectivity : All.
Weight and
packaging 1 case (p/n UT1500) 310x280x100 mm (12,2x11x3,9 in).
Quanti ty 1 off.
Vendor code K0680.
PAGE 602
-yCMI-U
fMI SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

BRACKET - SYNCHRO MOUNTING
108mm
(4.3in)
57mm
(2.2in)
A1699
Usage : To mount synchro.

Effectivity : All.
Quantity : 1 off.
PAGE 603/604
75-91-01 SEP 01/94
FOKKER 70/100

E E
LEP 1/2 SEP 01/06 R

76-11-00 501 SEP 01/94
76-11-00 502 SEP 01/94
76-11-00 503 SEP 01/06 R
76-11-00 504 SEP 01/06 R
76-11-04 401 SEP 01/94
76-11-04 402 SEP 01/94
76-11-04 403 SEP 01/94
76-11-04 404 SEP 01/94
76-90-01 401 SEP 01/94
76-90-01 402 SEP 01/94
LEP CHAPTER 76
Page 1/2
SEP 01/06
FOKKER 70/100
Aftiwnber of
Deutsche Aerosoace
TABLE OF CONTENTS

28-0-3938B SET - RIGGING PIN, POWER CONTROLS 76-11-00 502
28-0-4173 SET - SWITCHING BOX ADJUSTMENT, POWER 76-11-04 402
CONTROLS
UT548 PIN - RIGGING, CONTROLS 76-90-01 401
76 CONTENTS
FOKKER 70/100
DeutscfteAerosoace
PAGE 501
-11-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

SET - RIGGING PIN, POWER CONTROLS
90mm
(3.5 in)
F100-TEN-0300 b
nn PAGE 502
-UU SEP 01/94
FOKKER 70/100

SET – RIGGING PIN, POWER CONTROLS
Usage : To rig the engine controls.
Parts list : A. Pin-rigging 28-0-3938-01 2 off

J. Block-setting 28-0-3938-34 2 off
K. Pin-rigging 28-0-3938-35 2 off
L. Pin-rigging 28-0-3938-36 2 off
M. Case 28-0-3938-26 1 off
NOTE: 28-0-3938-01 is also used in AMM 27-42-01

(To simulate a sticking servo valve)
Effectivity : All.
Finish : A caution flag must be attached to each pin

(refer to chapter 20).
Weight and
packaging : 1 case.
Quantity : 1 off.
76-11-00
PAGE 503/504
SEP 01/06
FOKKER 70/100
A member of
Deutsche Aerosoace
PAGE 401
76-11-04 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SET - SWITCHING BOX ADJUSTMENT, POWER CONTROLS
380mm
F100-TEM-0373
PAGE 402
-70 -t -1 f\A
76-1 1-04 SEP 01/94
FOKKER 70/100
A member of
Deutscfte Aerospace

SET - SWITCHING BOX ADJUSTMENT, POWER CONTROLS
Usage : To adjust the microswitches in the switching boxes.

Tool
B. Adjustment tool 28-0-4173-01 1 off
C. Adjustment tool 28-0-4173-04 1 off
(Opposite of 28-0-4173-01)
Parts list : 1. Dial plate (B) 28-0-4173-13 1 off
Dial plate (C) 28-0-4173-18 1 off
2. Washer 28-0-4173-34 2 off
3. Screw 28-0-4173-33 2 off
4. Pointer (B) 28-0-4173-10 1 off
Pointer (C) 28-0-4173-17 1 off
5. Pin 28-0-1473-03 2 off
6. Screw 28-0-4173-27 2 off
7. Nut 28-0-4173-28 2 off
8. Bracket 28-0-4173-35 2 off
9. Pin - Rigging 28-0-3938-01 2 off
Effectivity : All.
Weight and
packaging : 1 Case.
Quanti ty 1 off.
PAGE 403/404
76-11 -04 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
Part number : UT548

PIN - RIGGING, CONTROLS
25.4mm
137mm
(5.4m)
A1720
Usage : To remove/install the emergency shut off valve front cable.

Effectivity : All.
Quantity : 1 off.
PAGE 401/402
76-90-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace


E E
LEP 1/2 SEP 01/94
77-31-01 101 SEP 01/94
77-31-01 102 SEP 01/94
77-45-00 501 SEP 01/94
77-45-00 502 SEP 01/94
77-45-00 503 SEP 01/94
77-45-00 504 SEP 01/94
77-45-00 505 SEP 01/94
77-45-00 506 SEP 01/94
LEP CHAPTER 77
PAGE 1/2
SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace
TABLE OF CONTENTS

28-0-4069 TEST BOX - ENGINE FAILURE DETECTION UNIT 77-31-01 101
UT1339-2 TEST BOX - ENGINE 77-45-00 501
UT1344-1 CABLE - MAIN SUPPLY 77-45-00 502
UT1426 CABLE - SIGNAL 77-45-00 503
UT1430 LEAD - REMOTE TERMINAL 77-45-00 504
UT1429 TERMINAL - REMOTE, TEST SET 77-45-00 505
Page 1/2
FOKKER 70/100
Deutsche Aerosoace

TEST BOX - ENGINE FAILURE DETECTION UNIT
175mm
(17,5in)
277mm
(27,7in) 175mm
(17.5in)
F100-TEM-0344
Usage : For repair and overhaul of the engine failure detection unit, type
EATFD8534.
Tool
B. Cable assembly
Effectivity : All.
Quantity : 1 off.
PAGE 101/102
77-31-01 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

TEST BOX - ENGINE
521mm 419mm --rf

(20.5 in) (16.5 in) I
203mm
(8.0 in)
86mm
(3.4in)
75957
Usage Measurement of speed, angle and temperature. To be used with p/n

UT1368, UT1367, UT1426 and UT1344-1.
DOCUMENTATION.
Effectivity : All.
Weight and
packaging : 1 box (p/n UT1381) 600x600x300 mm (23,6x23,6x11,8 in).
Quantity : 1 off.
PAGE 501
•7-7 AC
/ / -4O- SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

CABLE - MAIN SUPPLY
F1QQ-TEM-RR-75961
Usage : Measurement of speed and power. To be used with p/n UT1339-L

Effectivity : Aircraft with Rolls-Royce TAY 620-15 and 650-15 engines.
Quantity : 1 off.
77 >ic nn
/ /-45-UU
™bt ou502*
PAGE
SEP 01/94
FOKKER 70/100
Deutscne Aerospace

CABLE - SIGNAL
F100-TEM-RR-75962A
Usage : Measurement of angle and temperature. To be used with p/n

UT1339-2.
Effectivity : Aircraft with Rolls-Royce Tay 620-15 and 650-15 engines.
Quantity : 1 off.
PAGE 503
77 A c nn
/ / -4b-UU SEP 01/94
FOKKER 70/100
Deutscfte Aerospace

LEAD - REMOTE TERMINAL
A1724
Usage : Remote operation of test equipment. Use with UT1339-2 and UT1429.
Effectivity : All.
Quantity : 1 off.
PAGE 504
77-45-00
FOKKER 70/100
Amemberof
Deutsche Aerospace

TERMINAL - REMOTE, TEST SET
240mm
" (9.4in)
REMOTE TERMINAL - V T 1*29
120mm
(4.7in)
GDGDCDGDG
GDCDQCD
A1723
Usage Remote operation of test equipment. Use with UT1339-2 and UT1430.
DOCUMENTATION.
Effectivity All.
Quanti ty 1 off.
Vendor code K0680.
PAGE 505/506
77-45-00 SEP 01/94
FOKKER 70/100
Afncmber of
Deutscfie Aerospace


E E
LEP 1/2 SEP 01/94
78-00-00 201 SEP 01/94
78-00-00 202 SEP 01/94
78-30-00 501 SEP 01/94
78-30-00 502 SEP 01/94
78-31-01 401 SEP 01/94
78-31-01 402 SEP 01/94
78-90-01 401 SEP 01/94
78-90-01 402 SEP 01/94
78-92-00 401 SEP 01/94
78-92-00 402 SEP 01/94
78-92-02 401 SEP 01/94
78-92-02 402 SEP 01/94
78-92-02 403 SEP 01/94
78-92-02 404 SEP 01/94
LEP CHAPTER 78
FOKKER 70/100
Deutsche Aerosoace
TABLE OF CONTENTS

28-0-4103 ADAPTER - TORQUE 78-00-00 201
28-0-4225C SET - GROUNDLOCKS 78-30-00 501
28-0-4225D SET - GROUNDLOCKS 78-30-00 502
28-0-4220 SLING - UPPER DOOR HOISTING 78-31-01 401
28-0-4591 LOCK - THRUST REVERSER 78-90-00 401
28-0-3518 SLING - THRUST REVERSER HOISTING 78-92-00 401
28-0-4198 TROLLEY - THRUST REVERSER 78-92-02 402
78 CONTENTS
FOKKER 70/100
A member of
Deutscfic Aerososce

ADAPTER - TORQUE
17,0mm
(0,67in)
F100-TEM-0152a
Usage : To torque the attachment bolts of the thrust reverser to the

engine.
Effectivity : All.
Quantity : 1 off.
PAGE 201/202
78-00-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerospace

SET - 6ROUNDLOCKS
F100-TEM- 01963
Usage To safety the thrust reverser doors during maintenance.

Tool
consists of : A. Plate assy 28-0-4225-01 1 off
B. Bolt assy 28-0-4225-02 1 off
C. Case 28-0-4225-20 1 off
Parts list : Part A
1. Plate 28-0-4225-05 1 off
2. Pin-quick release 28-0-4225-07 2 off
4. Cable assy FON2-9135H190 2 off
Part B
1. Bolt NAS1305-64H 1 off
2. Ring-key FON2-9110-16 1 off
Effactivity : Pre mod SB F100-78-010
Finish : A caution flag must be attached to each of these tools (refer to
chapter 20).
Weight and
packaging : 1 case.
Quanti ty : 1 off.
PAGE 501
78-30-00 SEP 01/94
FOKKER 70/100
A member of
Deutsche Aerosoace

SET - GROUNDLOCKS
F100-TEM-0196a
Usage To safety the thrust reverser doors during maintenance.

Tool
consists of A. Plate assy 28-0-4225-03 1 off
B. Bolt assy 28-0-4225-02 1 off
C. Case 28-0-4225-20 1 off
Parts list Part A
1. Plate 28-0-4225-04 1 off
2. Pin-quick release 28-0-4225-07 2 off
4. Cable assy FON2-9135H190 2 off
Part B
1. Bolt NAS1305-64H 1 off
Effectivity Post mod SB F100-78-010
Finish A caution flag must be attached to each of these tools (refer to
chapter 20).
Weight and
packaging 1 case.
Quantity 1 off.
PAGE 502
78-30-00 SEP 01/94
FOKKER 70/100
Amennbcr of
Deutsche Aerospace

SLING - UPPER DOOR HOISTING
45mm
(1,77in)
F100-TEM-0195a
Usage To hoist the upper door of the thrust reverser during

removal/i nstal1ati on.
Effectivity : All.
Weight and
Quantity : 1 off.
PAGE 401/402
78-31-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

LOCK - THRUST REVERSER
16mm
(0,62 in}
39mm
(1.53 in)
F100-TEM-0374
Usage To safety the thrust reverser via the secondary lock latch for
flight operation.
Effectivity All.
Quanti ty 1 off.
PAGE 401/402
78-90-01 SEP 01/94
FOKKER 70/100
Deutsche Aerospace

SLING - THRUST REVERSER HOISTING
1600mm
(62,99in)
378mm
(14,88m)
378 mm
(14,88 in) F100-TEM-0198
Usage : To facilitate the removal/installation of the thrust reverser.

Effectivity : All.
Weight and
Quantity : 1 off.
PAGE 401/402
78-92-00 SEP 01/94
FOKKER 70/100
Deutsche Aerosoace
PAGE 401
TO no no
/ O-y^-U^ SEP 01/94
FOKKER 70/100
Arownbsr of
DeutscneAerosoace

TROLLEY - THRUST REVERSER
13
27
29
F100-TEM-0375
PAGE 402
SEP 01/94
FOKKER 70/100
A member of
DeutscneAerosoace

TROLLEY - THRUST REVERSER
Usage To transport or repair the thrust reverser in the shop.

Parts list : 1. Trolley 28-0-4198-01 1 off
2. Plate-name 28-0-4198-50 1 off
5. Nut DIN982-8-M16 15 off
7. Ring-assy 28-0-4198-43 1 off
8. Nut 28-0-4198-28 4 off
9. Ball-locating 28-0-4198-44 4 off
10. Plate-disc 28-0-4198-43 1 off
11. Bolt MS21250-06016 6 off
12. Washer AN960-C616L 6 off
14. See item 3
16. Stud 28-0-4198-40 3 off
17. Frame 28-0-4198-03 1 off
18. See item 10
19. Washer See item 6
20. Bolt DIN933-A4-70 M16x50 4 off
21. See item 3
22. Plate-disc 28-0-4198-42 1 off
23. See item 4
25. See item 3
26. Washer See item 4
27. Plate 28-0-4198-05 2 off
28. Plate-wood 28-0-4198-06 1 off
29. Plate-name 28-0-4198-49 1 off
30. See item 6
31. Frame 28-0-4198-02 1 off
32. Bolt DIN931-8.8 M16xl60 1 off
ZINCED
33. Pin-retaining 28-0-4198-45 1 off
34. Nut 28-0-4198-27 1 off
Effectivity : All.
Quantity : 1 off.
PAGE 403/404
78-92-02 SEP 01/94

tools f50

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

tools f50

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

tools f50

Uploaded by

Copyright:

Available Formats

STORK

Fokker Services B.V.

Rev. Date of Put In By Date Rev. Date of Put In By Date

005 DEC 01/87 FOKKER DEC 01/87

006 JUN 01/88 FOKKER JUN 01/88

007 DEC 01/88 FOKKER DEC 01/88

008 JUN 01/89 FOKKER JUN 01/89

009 JUN 01/90 FOKKER JUN 01/90

010 DEC 01/90 FOKKER DEC 01/90

011 JUN 01/91 FOKKER JUN 01/91

012 SEP 01/91 FOKKER SEP 01/91

013 MAR 01/92 FOKKER MAR 01/92

014 SEP 01/92 FOKKER SEP 01/92

015 JUN 01/93 FOKKER JUN 01/93

016 SEP 01/93 FOKKER SEP 01/93

017 DEC 01/93 FOKKER DEC 01/93

018 SEP 01/94 FOKKER SEP 01/94

019 MAR 01/95 FOKKER MAR 01/95

020 AUG 01/98 FOKKER AUG 01/98

021 AUG 01/99 FOKKER AUG 01/99

022 AUG 01/01 FOKKER AUG 01/01

023 AUG 01/03 FOKKER AUG 01/03

RECORD OF TEMPORARY REVISIONS

After insertion of a Temporary Revision in this manual, fill in the table.

TEMP. DATE OF INSERTED BY DATE REMOVED BY DATE

RECORD OF TEMPORARY REVISIONS PAGE 1

REVISION NUMBER : 027

To all holders of this Manual.

Telephone : +31 (0) 252 627350

REVISION NUMBER : 027

CHAPTER (AND FIG) PAGE REASON FOR CHANGE

LIST OF CHAPTERS 1/2 Updated.

LEP CHAPTER 24 1/2 Updated.

LEP CHAPTER 28 1/2 Updated.

LIST OF EFFECTIVE PAGES

THIS CHAPTER CONSISTS OF THE FOLLOWING PAGES

CHAPTER PAGE C DATE R CHAPTER PAGE C DATE R

LEP 1/2 MAY 01/11 R

LIST OF EFFECTIVE PAGES

THIS CHAPTER CONSISTS OF THE FOLLOWING PAGES

CHAPTER PAGE C DATE R CHAPTER PAGE C DATE R

LEP 1/2 MAY 01/11 R

PART NUMBER KEYWORD / PART DESCRIPTION CH-SE-SU PAG VEND MAN

01-1236-0000 TOWBAR - SPECIAL PURPOSE 09-10-00 203 59603 AMM

PART NUMBER KEYWORD / PART DESCRIPTION CH-SE-SU PAG VEND MAN

28-0-1120 TRESTLE - FUSELAGE 51-90-00 401 AMM

PART NUMBER KEYWORD / PART DESCRIPTION CH-SE-SU PAG VEND MAN

28-0-1761C SET - SPANNER, PASSENGER DOOR LATCH 52-11-00 501 AMM

PART NUMBER KEYWORD / PART DESCRIPTION CH-SE-SU PAG VEND MAN

28-0-2151B TOOL - SELECTOR VALVE ADJUSTMENT, 32-31-03 401 AMM

PART NUMBER KEYWORD / PART DESCRIPTION CH-SE-SU PAG VEND MAN

28-0-3515 ADAPTER - REAR, ENGINE HOISTING 71-00-00 402 AMM

PART NUMBER KEYWORD / PART DESCRIPTION CH-SE-SU PAG VEND MAN

28-0-4066 CART - RETAINING, UPPER AND LOWER 54-90-04 402 AMM

PART NUMBER KEYWORD / PART DESCRIPTION CH-SE-SU PAG VEND MAN

28-0-4211 ADAPTER – HOISTING, APU 49-00-00 503 AMM

PART NUMBER KEYWORD / PART DESCRIPTION CH-SE-SU PAG VEND MAN

28-0-4533 PIN - SPEEDBRAKE HANDLE SAFETY 27-60-01 401 AMM