Robot Vacuum Cleaner

USER MANUAL
S8+

Download the app

& activate product

Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.
THANK YOU LETTER
SAFETY INSTRUCTIONS
Thank you for choosing Midea! Before using your new Midea product, please read Warning for the machine
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance offers in a safe way. 1. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
CONTENTS Cleaning and user maintenance shall not be made by children without supervision.
2. Plug must be removed from the socket-outlet before cleaning or maintaining the
appliance. Switch off before cleaning or maintaining the appliance.
THANK YOU LETTER 01 3. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
SAFETY INSTRUCTIONS 02 4. WARNING: For the purposes of recharging the battery, only use the detachable
docking station provided with this appliance.
SPECIFICATIONS 06
Use only with BS2101 docking station.
PRODUCT OVERVIEW 07 5. This appliance contains batteries that are only replaceable by skilled persons.
6. Do not bring the smart robot close to heatsource, radiation or burning cigarette
QUICK START GUIDE 09 butts. It is strictly forbidden to vacuum the following objects:
1) All liquids such as water and solvents;
PRODUCT INSTALLATION 13 2) Lime, cement dust and other construction dust and garbage;
OPERATION INSTRUCTIONS 14 3) Heat generating objects, such as unextinguished carbon butts, cigarette butts;
4) Sharp fragments, such as glass, etc.;
APP SETUP AND OPERATION 21 5)Flammable and explosive items, such as gasoline and alcohol products.
7. Before using, please remove all fragile items from the ground (such as glasses,
CLEANING AND MAINTENANCE 23 lamps, etc.), and items that may be tangled with the side brush, Roller brush and
drive wheels(such as wires, curtains and other easily-entangled materials).
TROUBLESHOOTING 28
8. Please pay attention to your hair and avoid entanglement on wheels or roller
TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT 31 brushes when using, cleaning and maintaining the robot.
9. Do not use this product at an altitude of more than 2000m.
DISPOSAL AND RECYCLING 31 10.Correct Disposal of this product.
This marking indicates that this product should not be disposed with other house-
DATA PROTECTION NOTICE 32
hold wastes throughout the EU. To prevent possible harm to the
DOC AND CERIFICATIONS 33 environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources.
DECLARATION OF CONFORMITY 33 To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take
CE 34
this product for environmental safe recycling.
11. Warranty Information
The manufacturer provides warranty in accordance with the legislation of the
customer's own country of residence, with a minimum of 1 year (Germany: 2 years),
starting from the date on which the appliance is sold to the end user.
The warranty only covers defects in material or workmanship.

02
 The repairs under warranty may only be carried out by an authorized service centre.
Warning for battery
When making a claim under the warranty, the original bill of purchase (with
purchase date) must be submitted.
1. The product must be powered off before removing the battery.
The warranty will not apply in cases of:
2. Please note that do not disassemble the battery by yourself.
- Normal wear and tear
3. If you need to replace it, please contact the after-sales service center.
- Incorrect use, e.g. overloading of the appliance, use of non-approved accessories
4. Please dispose of used battery according to local laws and regulations
- Use of force, damage caused by external influences
5. Do not dismantle, open or shred the battery.
- Damage caused by non-observance of the user manual, e.g. connection to an
6. Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
unsuitable mains supply or non-compliance with the installation instructions
7. Do not short-circuit a battery.
- Partially or completely dismantled appliances
8. Do not store batteries haphazardly in a box or drawer where they may short-circuit
12. Wireless network: 2400-2483.5MHz, MAX POWER: 20dBm,
each other or be short-circuited by other metal objects.
BLUETOOTH MAX POWER: 10dBm
9. Do not subject batteries to mechanical shock.
To satisfy RF exposure requirements, a separation distance of 20 cm or more
10. In the event of a leaking, do not allow the liquid to come in contact with the skin or
should be maintained between the antenna of this device and persons during
eyes. If contact has been made, wash the affected area with copious amounts of
device operation. To ensure compliance, operations at closer than this distance
water and seek medical advice.
is not recommended.
11. Do not use any charger other than that specifically provided for use with the
13. CLASS 1 LASER PRODUCT
equipment.
INVISIBLE LASER RADIATION
12. Do not use any battery which is not designed for use with the equipment.
(Note:Laser classified to Class 1 according to IEC 60825-1:2014)
13. Do not mix different manufacture, capacity, size or type within a device.
14. Keep batteries out of the reach of children.
15. Seek medical advice immediately if the battery has been swallowed.
16. Keep batteries clean and dry.
Warning for docking station 17. Do not leave a battery on prolonged charge when not in use.
18. After extended periods of storage, it may be necessary to charge and discharge the
1. “IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS" and batteries several times to obtain maximum performance.
"DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY 19. The batteries give their best performance when they are operated at normal room
FOLLOW THESE INSTRUCTIONS". temperature (20 °C ± 5 °C).
2. This appliance can be used by children aged from 8 years and above and persons 20. Retain the original product literature for future reference.
with reduced physical, sensory or mental capabilities or lack of experience and 21. The battery may be irreversibly damaged if the battery is in low power for a long
knowledge if they have been given supervision or instruction concerning use of the time. It is recommended that the battery retain sufficient power before storage.
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. [symbol IEC 60417-5957
Cleaning and user maintenance shall not be made by children without supervision. ( 2004-12 )] for indoor use only
3. Plug must be removed from the socket-outlet before cleaning or maintaining the
appliance. Switch off before cleaning or maintaining the appliance. [symbol ISO 7000-0790
read operator's manual
4. If the supply cord is damaged, it must be replaced by the manufacturer, its ( 2004-01 )]
service agent or similarly qualified persons in order to avoid a hazard.
5. Docking base is only applicable to the product S8+. (Battery pack type : Li-ion, DC [symbol IEC 60417-5031
direct current
( 2002-10 )]
14.4 V, 5200 mAh)
The Docking base will automatically start charging after Robot Vacuum Cleaner
time-lag miniature fuse-link where X is the symbol for the time/current
returned to the base. characteristic as given in IEC 60127
6. Warning: The battery charger(Docking station) is not intended to charge non-re-
chargeable batteries. [symbol IEC 60417-5032
7. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal ( 2002-10 )] alternating current
cut-out, this appliance must not be supplied through an external switching device,
such as a timer, or connected to a circuit that is regularly switched on and off by [symbol IEC 60417-5172
class II equipment
the utility. ( 2003-02 )]

03 04
Intended Use
SPECIFICATIONS
The following safety guidelines are intended to prevent unforeseen risks or damage from
unsafe or incorrect operation of the appliance. Please check the packaging and appliance
Product Model S8+
on arrival to make sure everything is intact to ensure safe operation. If you find any
damage, please contact the retailer or dealer. Please note modifications or alterations to Host Charging Voltage 16.9V
the appliance are not allowed for your safety concern. Unintended use may cause
hazards and loss of warranty claims. Host Rated Voltage 14.4V

Host Rated Power 55W

Explanation of Symbols Docking Station Model BS2101

Danger Docking Station Input 220-240V~, 50-60Hz, 765W

This symbol indicates that there are dangers to the life and health of
persons due to extremely flammable gas. Docking Station Output 16.9V , 2A

Warning of electrical voltage Battery Model BP14452F

This symbol indicates that there is a danger to life and health of
persons due to voltage. Battery Rated Voltage 14.4V

Warning Battery Capacity 5200mAh 74.88Wh

The signal word indicates a hazard with a medium level of risk which, if
not avoided, may result in death or serious injury. Charging Limit Voltage 16.8V

Caution
The signal word indicates a hazard with a low degree of risk which, if
not avoided, may result in minor or moderate injury.

Attention
The signal word indicates important information (e.g. damage to
property), but not danger.

Observe instructions
This symbol indicates that a service technician should only operate and
maintain this appliance in accordance with the operating instructions. Midea Robozone Technology Co.,Ltd.
Add.: No.39 Caohu Avenue, Xiangcheng Economic
Read these operating instructions carefully and attentively before using/commissioning the Development Zone, Suzhou, Jiangsu, China
unit and keep them in the immediate vicinity of the installation site or unit for later use!

Company: KD EUROPE
Add.: Stara Debszczyzna 4, 16-424, Filipow, Poland
Mail: Kdeurope.office@gmail.com

05 06
PRODUCT OVERVIEW Accessories

Product
Self-emptying Base x1 Mop Cloth Holder x1

Canister Lid
Recharging Bumper Indicator
Button LiDAR Sensor Top cover release
button of self-emptying base
Power Button

Cover

Water Tank
Mop Cloth x1
Return-to-charge
signal emission area
Charging
Contacts
Air Outlet
Air Inlet

Network Pairing
Button
Reset Button
Dustbin Release Button Cleaning Brush x1 Manual x1 Vibration Mopping Assembly x1
Dustbin
Cleaning Brush

Water Tank
Release Button

Cliff Sensors

Omni-directional Wheel
Side Brush x2 Filter x1 Dust Bag x2
Charging Contacts
Side Brush

Special rag for Main Wheel

vibration mopping
Cover Plate of
Water outlet
Main Brush
(under the rag)

07 08
QUICK START GUIDE
First Use Step 3 Step 5
Install side brushes. Network pairing.
Step 1 1) Download the App. On the App
Remove excess clutter and cables on the floor before cleaning. home page, tap “+” to add the device.
2) Press the network pairing button on
robot for 3 seconds to start pairing.
3) Follow instructions on App to
complete the setup and open up
new ways to clean.
Get Ready

Unbox the robot and the self-emptying base

Step 4 Step 6
Power on the Robot. Start cleaning
Place the robot on the base. Press Fill the tank with water to the MAX line
and hold “ ” button to turn on
the robot. We recommend you
charge the robot for at least 6
hours before first use.
Water Inlet/Outlet

Ensure everything is well assembled on

Remove the protection bar Remove the retainer Peel off the protection film
the robot.
Briefly press “ ” button to start/pause/
resume cleaning.

Step 2
Place the self-emptying
base.

0.5m

0.5m
Put extra power cords
in their storage slot
1.5m

09 10
APP & Voice Control

Applicable to Google Assistant & Amazon Alexa:

Skill Name for Google Assistant Skill Name for Amazon Alexa
“SmartHome” “SmartHome”
Wireless
network

NOTE
For using Google Assistant and Amazon Alexa, please make sure SmartHome APP has
been downloaded and matched with your robot successfully.

SmartHome*
Step1. Download SmartHome APP and link your robot successfully.
Step2. Get your Amazon Alexa or Google Assistant device ready.
Step3. By searching skill name above to link voice device and your robot.
(SmartHome account need to be registered in the process)
Step4. Voice-control your robot by using voice commands in the description.

start stop charge

start <robot name> stop <robot name> dock <robot name>

Google turn on <robot name> turn off <robot name> <robot name> go home
switch on <robot switch off <robot <robot name> go
name> name> charge

Alexa turn on <robot name> turn off <robot name> set charge mode on
iOS 13.0 or later Android 8.0 or later

11 12
PRODUCT INSTALLATION OPERATION INSTRUCTIONS
Installation of Self-emptying Base Function of Buttons

1. Place the self-emptying base flat against a wall. Please leave at least 0.5m of clearance
on either side, 1.5m in front of the base.
2. Ensure the power cable of the self-emptying base is plugged into a working electrical
outlet.
3. Store the excess cords into the slot at the back of the base to avoid affecting the Recharge Button
proper function of the robot vacuum.

Network Pairing Start / Pause / Shut Down

Button
(under the cover)

Reset Button
(under the cover)

0.5m

0.5m

1.5m

Installing the Side Brushes

Start / Pause / Shut Down
Press and hold to turn on the robot.
1. Turn the unit over.
Start: Short press button or use App to start cleaning.
2. Attach the correct color side brush to the matching post and press down until they
Pause: Short press to pause the cleaning. To resume cleaning, briefly press again.
fit into place.
Shut Down: Press and hold the power button to turn off the robot. A shut down sound
3. Ensure side brushes can rotate freely.
will be heard. Note that robot will not be turned off if it is on the charging base.

Networking
Press and hold the network pairing button for network configuration. Robot is in pairing
status if the light is flashing.

Recharge
Short press button to recharge.

Reset
Press “Reset” button to reset the robot if it is not responding or does not
function properly.

13 14
Charging Robot Vacuum Cleaning

1. Press and hold the power button to turn on the robot. Please clean up the wires and sundries scattered on the ground and remove precious,
fragile and dangerous items that are easy to fall before cleaning.

Start / Pause

2. Place the robot on the self-emptying base to start charging. We recommend that you
charge the robot for at least 6 hours before using it for the first time.

During its first cleaning job, it is recommended to follow the robot to find some possible
problems. The robot can clean much more smoothly after that. If certain area do not
need to be cleaned, you can add No-Go Zones or Virtual Walls on the map via the app
to prevent the robot from entering the specified area.

NOTE NOTE
1. Please do not place the self-emptying base on carpets or soft floors and keep the area dry. Do not use your robot on wet surfaces. Before using the product on a carpet with tasseled edges,
2. Remove the mopping cloth holder when the robot is under the charging state. please fold the rug edges. Do not use the mopping function on carpets.
3. To make sure the robot is always ready for use, we suggest that you keep the robot charged on
the self-emptying base. For long-term storage, remove the robot from the base and store it in a
cool & dry place.
4. If the robot is not used for more than 3 months, allow it to get charged for at least 12 hours
before using.
5. To preserve the battery lifespan, we suggest you fully charge the battery at least once every
six months.

15 16
Mopping Vibration Mopping Use Guide

1. Check and ensure the mop cloth is 2. Press the release button on the 1. Remove the normal water tank. 2. Stick dedicated wipe on vibration
attached to the mop cloth holder. water tank and pull to remove. tank.

Water Tank

3. Fill the water tank. Open the lid, fill the 4. Attach the mopping cloth holder
tank with water, and securely close the lid. to the water tank. 3. Fill the tank with clean water (Electric 4. Wipe the electronic control
parts inside, Please do not immerse the interface with a dry, soft cloth
tank in the water). to ensure it is dry.

Water Inlet/Outlet

Mop Cloth Holder

5. Re-insert the water tank assembly into 6. Press “ ” or use App to start
the robot. You will hear a click sound mopping. If you don’t want the
when the water tank is installed properly. robot to go on your carpet when
mopping, set a No-go zone/virtual 5. Reinstall the water tank into the robot 6. Start the robot for vibration mopping
wall via App or roll up the carpet. by hearing a clicking sound. (please do not use vibration moping
on carpet).

or
NOTE
a) Please do not exceed the “Max” water level.
b) It is recommended to use clean water in the water tank. Do not add any detergent in the water to
prevent clogs. Do not use hot water.
c) After using the mopping function, it is recommended to remove the mopping module during
charging to prevent the damp mop from wetting the floors.
d) Remove the mopping cloth holder when the robot is under the charging state.
e) You can adjust water flow via APP according to your requirement.

17 18
Dust Collection Status Indicators of the Robot

1. Setting of dust collection time and frequency: Indications Status

Dust collection settings can be changed on the SmartHome APP.
Power indicator is Robot is standby, cleaning, and
The dust collection frequency can be set 1 time, 3 times or 5 times after cleaning. No.1
continuously on return-to-charge after completion of cleaning.
No.2 Power indicator is off Sleep/shutdown.
Power indicator Robot is faulty. (See Troubleshooting section
No.3
flashes quickly for fault solutions)

Power indicator
No.4 Robot is charging.
flashes slowly

Recharge indicator Robot is return-to-charge after completion

No.5
is continuously on of cleaning.

No.6
Recharge indicator Robot is return-to-charge due to low
flashes battery level.

No.7 Recharge indicator Robot is standby/cleaning/charging.

is off

No.8 Network indicator is off Robot is not network paired or disconnected

from the network.
2. Auto Dust Collection:
The self-emptying base will start to work automatically when the robot returns No.9 Network indicator Robot is waiting for network pairing.
flashes slowly
to the self-emptying base as it reaches the scheduled cleaning times.
No.10 Network indicator Robot is networking.
flashes quickly

3. Manual Dust Collection through APP: No.11 Network indicator is Robot shows normal connection with the
continuously on network.
When the robot returns to the self-emptying base, press “Manual dust collection”
to start dust collection.

Status Indicators of the Self-emptying Base

Indications Status
Self-emptying base is not powered.
No.1 Off
Self-emptying base is standby.

Self-emptying base is fully charged.

Manual
dust
collection
No.2 White indicator is
continuously on Self-emptying is in progress.

Red indicator is Dust bag is full. Please replace it with a new

No.3 continuously on dust bag.

Dust bag is not installed in place or self-emptying

No.4 Red indicator flashes base is not tightly covered with its top cover.
Install the dust bag and close the top cover tightly.

19 20
APP SETUP AND OPERATION SmartHome App Quick Guide

NOTE NOTE
If your home wireless network name or password is changed, you will need to re-established If the wireless network in your home is unstable, it may cause a certain delay in the related
connection with your robot vacuum. operations of the App. (The content of the SmartHome App is subject to change with the
product technology update. Please refer to the SmartHome interface for details).
1. App supports iOS 13.0 and above, Android 8.0 and above phone system versions, but Pad device
is not accepted; generally the phone system version may be checked by clicking “Setting- About
Mobile Phone.
2. This model does not support WEP encrypted router
3. The network accessing configuration of the cleaner requires wireless network of 2.4GHz frequency
range, 5GHz frequency range is currently incompatible.
4. Wireless network is mandatory for network accessing configuration of the cleaner; once the Back to previous Robot settings
network accessing is configured successfully, App may be operated in wireless network/2G/3G/ page
4G/5G network environment and the cleaner may be controlled remotely.
5. If your home wireless network password is changed, the cleaner will be displayed as off-line on Battery
App; Without any changes of App account number, one just needs to configure network accessing
for the cleaner once again.
6. If others want to use App to operate same cleaner, they need to be invited on App by the device
owner by sharing the device to the new user’s account (on the condition that the invitee has Cleaning area Map album
downloaded App and has registered an account).
7. The device will be removed from the former device owner’s device list if a new account owner
connect the device successfully.
8. Once the cleaner is configured successfully network accessing, the following operations will result
in clearance of wireless network settings and secondary network accessing configuration is
required; Long press the network accessing configuration key on the device for over 3 seconds,
and after a tick sound is heard, all wireless network information will be cleared.

1. Ensure the mobile phone is connected to your home wireless network. Also please
turn on the Bluetooth on your phone. If not, go to Settings and turn it on. Sterilization Manual Manual dust
dust
switch collection collection
2. Download the SmartHome app and register your robot: Cleaning setting
a. Scan the QR code or search for the SmartHome app in
the Apple or Google Play Store. Download the app. More customi-
b. Open the app and create your personal account. Follow zation options
Room Zone
instructions on the screen.

3. Add your robot vacuum to your app. Charge Start cleaning

Press the “ + ” button on the main screen of the app and
select S8+ from the available list of products.

4. Connect your robot to your wireless network.

After assembling and powering on the robot, press and
hold the network button until a beep sound is heard.
The indicator light should start flashing. Follow
instructions on app for next steps.

21 22
CLEANING AND MAINTENANCE Cleaning the Side Brush

1. Pull to remove the side brushes. Remove any tangled hair, debris, and then
reinstall them.
Cleaning the Main Brush 2. It is recommended to clean the side brushes every week and replace them
every 6-12 months.
1. Turn over the main unit. Remove the cover and take out the main brush.
Use the cleaning brush or scissors to clean the tangled hair or debris.

Remove hair
from the brush

NOTE
If side brushes are curled, you can remove them and place in warm water (Suggested 30 - 50°C )for
30 seconds and then let it thoroughly dry.

Cleaning the Dustbin and Filter Elements

NOTE
2. Dry the main brush and cover thoroughly, and then reinsert them back in the robot. It Empty the dustbin after each use.
is recommended to clean the main brush every week and replace it every 6-12 months.
1. Press dustbin release button to remove 2. Empty the dustbin.
dustbin from robot.

Dustbin
Release Button

23 24
3. The filter is on the side of the dustbin. 4. Reinsert the dustbin back in Cleaning the Sensor and Wheel
Remove debris by tapping the filter the robot.
against your garbage bin. You can clean It is recommended to clean the Wipe the sensors and wheels gently with a dry, soft cloth, as shown in the figure.
the filter and the sponge with water, but filter elements every week and
remember to dry them THOROUGHLY replace them every 1-3 months.
before reinserting them back into the
dustbin.

Cleaning the Water Tank

1. Once finished mopping, press the water tank release button and pull to remove the
normal water tank or vibration tank. Detach the mop cloth. Cleaning the Charging Contacts

Wipe the charging contacts on both the robot and the self-emptying base with a dry,
soft cloth, as shown in the figure.

2. Wash the mopping cloth and dry it thoroughly.

3. Open the cover and pour out the remaining water in the water tank.
Clean the water tank as needed.

25 26
Replacement of Dust Bag for the Self-emptying Base
(Monthly Replacement Recommended)
TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following tables
contain possible causes and notes for resolving an error message or malfunction. It is
Take out the used disposable dust bag. recommended to read the tables carefully below in order to save your time and money
that may cost for calling to the service center.
If you have after-sales problems, it is recommended to go to SmartHome-Help-Contact
us/Feedback for help.

Problem Possible reason Solution

The power switch is not Power on the appliance.

turned on while charging.
The appliance will
Close the lid of the not be charged. The appliance and charging Make sure the appliance is
Wipe the filter mesh Install the new dust bag self-emptying base terminals are not in full fully in contact with the
contact. charging terminal.

The appliance is covered by The appliance will automati-

wires on the ground, cally start the escape mode. If
dropping curtain fabric or it is not out of trouble, it
blankets are twined. needs manual help.

The appliance gets

stuck. Side brush and main brush, Clean the windings on the
etc. get stuck, and the side brush and restart it. If
appliance cannot run not, contact the post-sales
normally. department.

Not cleaned
Maintenance of Base for the Self-emptying Base (Cleaning as The appliance does not have Charge the appliance.
completely, and
enough battery power.
Needed) recharge it.

Screw off the screws for the air duct cover Clean air ducts No cleaning The power switch is not on. Turn on the power switch of
according to the appliance.
to remove the cover
present time.

Scheduled appointment is Reset and make appointment.

cancelled.

The mop holder magnet falls Contact the aftersales service

off. center.
After the mop
holder is installed,
the appliance is There’s no water in water Add water.
impermeable. tank.

The appliance base outlet Clear water outlet and tank

hole is blocked. filter.

27 28
Problem Possible reason Solution Problem/Cause Troubleshooting Solution

The ground is slippery. If the floor is waxed, dry it Check if the mobile phone is The mobile phone shall be
before use. accessed to network. accessed to network once
The appliance has again.
missed sweeps, Wires, shoes and other Minimize ground items as
there is no plan for objects placed on the ground, much as possible. Check if the router works Re-start the router.
cleaning, and the
Problem: normally.
affecting the normal opera- App displays
map in the app tion of the appliance. disconnection.
shows irregularly. The cleaner is required to be Power on the cleaner once
powered. again.
Cleaning is interrupted Do not move or block the Cause:
halfway. appliance during work. Disconnection
between the mobile The wireless network Add new appliances into App.
phone and the configurations of the
The power switch is not Turn on the power switch. appliance. equipment are cleared.
turned on.
The wireless network After system start-up, long
password or network is press network pairing button
Appliance does not Low battery. Charge the appliance. changed. and release it after a tick sound
work.
is heard; clear all wireless
network configurations of the
Wheels are dropped and the Place the appliance close to cleaner and add household
three groups of drop sensors the ground. electrical appliances once
are in a falling state. If necessary, contact again for operation.
post-sales service center.

Network busy. Re-start the router and

reduce the number of access
There is an obstacle ahead. Clear the front obstacles. Problem: users.
Appliance retreats. Slow App operation.

Poor wireless network signal Check the settings of the

Bumper rail is clamped. Tap the bumper rail to check Cause: reception of the mobile mobile phone itself.
for if there is foreign matter Network connection
phone.
stuck. is not so smooth.

The network bandwidth is not Broaden network bandwidth.

so adequate.

Unable to scan Try another mobile phone for Try another mobile phone to
the QR code confirmation. scan;
Add appliance by product
category.

29 30
TRADEMARKS, COPYRIGHTS Compliance with RoHS Directive

AND LEGAL STATEMENT The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does
not contain harmful and prohibited materials specified in the Directive.

logo, word marks, trade name, trade dress and all versions thereof are Package information
valuable assets of Midea Group and/or its affiliates (“Midea”), to which Midea owns
trademarks, copyrights and other intellectual property rights, and all goodwill derived Packaging materials of the product are manufactured from
from using any part of an Midea trademark. Use of Midea trademark for commercial recyclable materials in accordance with our National Environ-
purposes without the prior written consent of Midea may constitute trademark ment Regulations. Do not dispose of the packaging materials
infringement or unfair competition in violation of relevant laws. together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local
authorities.
This manual is created by Midea and Midea reserves all copyrights thereof. No entity or
individual may use, duplicate, modify, distribute in whole or in part this manual, or
bundle or sell with other products without the prior written consent of Midea.

All the described functions and instructions were up to date at the time of printing this
manual. However, the actual product may vary due to improved functions and designs.
DATA PROTECTION NOTICE

DISPOSAL AND RECYCLING For the provision of the services agreed with the customer,
we agree to comply without restriction with all stipulations of applicable data protection
law, in line with agreed countries within which services to the customer will be delivered,
Important instructions for environment as well as, where applicable, the EU General Data Protection Regulation (GDPR).

Compliance with the WEEE Directive and Disposing of the Waster Product: Generally, our data processing is to fulfil our obligation under contract with you and for
This product complies with EU WEEE Directive (2012/19/EU). This product bears a product safety reasons, to safeguard your rights in connection with warranty and
classification symbol for waster electrical and electronic equipment (WEEE). product registration questions. In some cases, but only if appropriate data protection is
ensured, personal data might be transferred to recipients located outside of the
This symbol indicates that this product shall not be disposed
European Economic Area.
with other household wastes at the end of its service life. Used
device must be returned to official collection point for
Further information are provided on request. You can contact our Data Protection
recycling of electrical electronic devices. To find these
Officer via MideaDPO@midea.com. To exercise your rights such as right to object your
collection systems please contact to your local authorities or
personal date being processed for direct marketing purposes, please contact us via
retailer where the product was purchased. Each household
MideaDPO@midea.com. To find further information, please follow the QR Code.
performs important role in recovering and recycling of old
appliance. Appropriate disposal of used appliance helps
prevent potential negative consequences for the environment
and human health.

31 32
DOC AND CERTIFICATIONS CE

Midea hereby declares that the appliance with MSmartHome

Declaration of Conformity functionality meets the essential requirements and other
relevant provisions of the Directive 2014/53/EU. A detailed
Unique identification of this DoC M7 -001 RED Declaration of Conformity can be found online at
We Midea Robozone Technology Co.,Ltd. www.midea.com among the additional documents on the 2.4 GHz band:100mW max.
No.39 Caohu Avenue, Xiangcheng Economic Development Zone, Suzhou, Jiangsu, China product page for your appliance.

responsibility that the product:

product name Robot Vacuum Cleaner
trade name Midea/eureka/Comfee
type or modelM7 , M7-A, M7 Pro, M7 Pro Antibacterial Mopping, Extrema, M7 Pro+,
Atlas Orbit Pro, NER700, NER700 Pro, S8, NER800, S8+
to which this declaration relates is in conformity with the essential requirements
and other relevant requirements of the Directive:
2014/53/EU 2011/65/EU (EC)No 1907/2006
The product is in conformity with the following standards and/or other normative documents:

2014/53/EU : EN 60335-2-2:2010 +A11:2012 + A1:2013

EN 60335-1:2012+A11:2014+AC:2014+A13:2017+A1:2019+A14:2019+A2:2019
EN 62311: 2008 EN 62233: 2008
EN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4 EN 55014-1:2014+A11:2020
EN 55014-2: 2015
EN IEC 61000-3-2: 2019 EN 61000-3-3:2013+A1: 2019 EN 300 328 V2.2.2
2011/65/EU : EN 62321-1:2013 EN 62321-2:2014 EN 62321-3-1:2014
EN 62321-4:2014 EN 62321-5:2014 EN 62321-6:2015 EN 62321-7-1:2015
EN 62321-7-2:2017 EN 62321-8:2017

Supplementary information:
Technical file held by: Midea Robozone Technology Co.,Ltd.
Place and date of issue (of this DoC): CHINA 2021-7-30
Signed by or for the manufacturer
(Signature of authorized person)
Name (in print):Shawn Yan
Title:

33 34