S. Senthilnathan B.

Tech Chemical
Mob: No. 9176617291
Email: senthilnathana2009@gmail.com
DOB: 20th MAR, 1983
Permanent Address: No: 7, Athipet Main Road, Ambattur Chennai.
Marital Status: Married
RESUME

CAREER OBJECTIVE

Exceptionally focused and skilled Chemical Engineer- Agri input fertilizers & Ammonia Plant/ Ammonia Cryogenic Terminal
Operation with an outstanding Govt regulatory licence. Targeted production without any down time. and safety record. Wide
breadth of knowledge in industrial chemical processes with emphasis on polymer properties. Able to multitask effectively in
handling crisis work situations.

EDUCATIONAL QUALIFICATION

 B. TECH (Chemical) with first division 63% from Madras University (Passed out- 2004).
 HSC-Sir Ramaswamy mudhaliar Hr. Sec school, (Govt), Ambattur Chennai in 2000 with 64.4 %
 SSLC-Sir Ramaswamy mudhaliar Hr. Sec school (Govt), Ambattur Chennai in 1998 with 66.58 %

PROFESSIONAL SNAPSHOT

 As a Chemical Engineer having 17 years’ experience in Agri input fertilizer, Biostimulants products & Ammonia
– Urea Plant/ Ammonia Cryogenic Terminal Operation, Current role – Chief Engineer – operation & Govt
regulatory and Statutory licence – G2, Factory lay out approval, MoEF PUPLIC Environmental clearance Delhi, state
TNPCB- CTE & CTO, DISH Approval, PESO Approval, IEC – DGFT CHEMEXIL, shefexil & ALL Agriculture Depart.
Manufacturing and sale approval. State water supply & electricity permission for factory & Production,
Continuous Processing Operations and all associated facilities, including Utilities Plant Operations cooling tower,
Boiler. Pre-commissioning and commissioning. Start up/ shutdown. SOP preparation for pre-
commissioning/commissioning & Normal operation.
 Prepare a plan for day to day activities, supervising, coordinate with operation team.
 Experiences production, commissioning Pre-work & Post work. Plant startup/ shut down Planning,
Maintenance and Safety.
 Experience in Cryogenic storage tank commissioning, complete terminal commissioning JNPT PORT- DFPCL
Mumbai, SPIC Ammonia plant production/ Terminal operation Tuticorin port.
 Plant startup/shutdown, JSRA, JSA, PTW, Manpower Planning, PM, RM, SAP, Daily production report, mock drill
conducting.
 Work Permits system (PTW), Job Safety Risk Assessment, Job Safety analysis, Pre Startup Safety Review, safety
system
 Experience in managing/ streamlining processes. Possess knowledge in identifying and rectifying problems,
troubleshooting, conceptualizing and implementing measure for increasing operational efficiency

PROFESSIONAL EXPERIENCE

Sl.no Name of Employer Position Department Duration

5 Aura Biotechnologies private limited – Chief Engineer OPERATION & All JAN2020 TO TILL
Agri Division. Manamadurai, Sivagangai - operation. Depart Govt regulatory DATE
tamilnadu & Statutory licence
4 SPIC (SOUTHERN PETROCHEMICALS Dy. Manager Production Depart. OCT 2011– May2016
INDUSTIRALS CROP.LTD)-TUTICORIN May 2016 -DEC 2019

3 DEEPAK FERTILISERS & Asst. Manager Shift in charge Sep2008-sep2011

PETROCHEMICALS CORP.LTD -MUMBAI production
TALOJA
2 MFL- MANALI GEAT- UREA Production(H2, NH3) Mar2007- sep 2008

1 ASHAPURA MINE CHEM. LTD Engineer Production Jan2005- Feb 2007

Strategic

 All Factory start up government regulatory authorise Management licensing approvals.

 Plan optimum use of available production facilities/circuits to ensure on time delivery of products
 Ensure effective utilization of manpower, utility, raw materials,(terminal side- planning pre-cooling
transfer, truck loading, ship unloading, vapour pushing maintain the terminal safe zone pressure,
temperature. etc.
 Ensure fulfillment of market/customer requirement by producing right quality of material as per
business plan.
 Report to Head Production (site) on the status of Legal Compliance and apprise him of its implication
on business
Operational parameters
 Review the history of operational parameters around the clock and take appropriate action to meet the operational
standards.
 Control the operation of the plant and equipment to comply with all EHS Standards.
 Expected to operate the plant to meet budgeted rates and quality requirements.
 Equipment start-up and Shut down activates. Purging, Pre cleaning, Review of check list- valve isolation, Blind check
list, P&ID Correction.

Operating procedures
 Review current work procedures and develop new work procedures and instructions in order to serve as a guideline
for field operators
Reporting on operational performance
 Monitor and report to GM the operationa; performance of the process to ensure continuous, smooth and
uninterrupted operations.
Continuous Improvement
 Make suggestions for the improvement of the plant operation and procedures.
 Successful implementation of improvement suggestions.
SHUT-DOWN & START-UP
 Ensure all actions are taeken for the safe shutdown and startup in specific areas of the plant in line with standard
operating procedures.
Work Permits
 Take necessary actions to facilitate the authorization of work permits to work in the field specifying conditions to
work safety and ensure compliance.
 Ensure Isolation checklist, Blind checklist, purging procedures, P&ID line & blind marking.
Inspection of field
 Undertake Physical inspections in the field to ensure operational equipment is in good working condition.
Maintenance work orders
 Follow up maintenance work orders and co-ordinate with other departments to ensure maintenance jobs are
completed on time.
Training
 Provide on the job training for field operator and Trainee to ensure they are performing to minimum performance
standards.
Housekeeping
 Personally responsible and accountable for maintaining and cleaning the workplace at all times to avoid accidents
and personal injuries.

Health, Safety and Environment

 Take appropriate action to meet health, safety guidelines and regulations and environmental conditions within
acceptable norms and standards.
 Follow and enforces all safety precautions and procedures to ensure the safety of equipment and personnal.
 Follow all safety instructions and notices and wear protective equipment at all times.
 Educate to promote a culture of safety first as reflected by low accident and incident rates.
 Education all operational HSE management system to ensure all operation in his specific areas observe standard
HSE process and process and operating procedures.
Skills
 Effective leadership skills.
 Planning and scheduling skills.
 Proven track record of effectively managing resources(manpower).
 Self-starter with minimal supervision for routine activities.
 Strong work ethic and be able to adhere to company, polices, and standards business etiquette.

Pre-Commissioning & Commissioning Experience :

Air blowings.
Steam blowing of HP & LP Steam lines.
Flushing & degreasing of lines.
Mechanical completion checking of various lines with isometric views.
Hot lube oil circulations.
Commissioning of screw Compressor.
 Pre-cooling operation – vapor pushing operation.
Chemical cleaning & Amine circulation of CO2 Removal unit.
Catalyst filling in Reformer, Hydro generator, Desulphurisers, etc.
Chemical circulation of STEAM DRUM for passivaion.
Boil out & Dry out of STEAM REFORMER & STEAM DRUM.
Centrifugal Compressors commissioning & start up.
Flare commissioning & start up.

Terminal Operation

 Planning, organizing and running the operations day-to-day operations of the Plant to meet the
Discharge/Transfer targets & cryogenic / LPG / Ammonia Terminal operation.
 Coordinate with Agent & Surveyor & ship captain/ control room.
 Preparation of ship-shore reconciliation sheet for every vessel during discharge and system walk through report
every month, updating of MCR daily records and job status and completion of various other tasks given from time
to time and reporting to GM.
 Acted as Ship and Terminal Safety in charge for 200+ships in LPG & Ammonia and carried out Safety inspection,
Dock safety and negotiations with Ship personals before Cargo dispatch and maintain safe dispatch throughout
cargo completion.
 Review the history of operational parameters around the clock and take appropriate action to meet the operational
standards.
 Control the operation of the plant and equipment to comply with all EHS Standards.
 Expected to operate the plant to meet budgeted rates and quality requirements.
 Equipment start-up and Shut down activates. Purging, Pre cleaning, Review of check list- valve isolation, Blind check
list, P&ID Correction.

Jetty Operations

 To coordinate with planning department, Port Authorities & Vessels agent in allocation of berth and berthing
schedule.
 To carry out safety checks on vessels and jetty in line with company and international standards.
 Conduct a key meeting with ships officers regarding cargo operation plan, executing initial and final cargo/shipping
documentation.
 Ships loading and unloading operations done by using hose tower and loadings arms
 Unloading of fully refrigerated cargo of AMMONIA /L.P.G. through pre-chilled pipelines, also loading & unloading of
liquid petroleum & Non-petroleum (Acids) product.
 To supervise cargo conditions and complete Ship/Shore safety check list in accordance with ISGOTT guidelines.
Connection of loading arms, monitoring & recording parameters during unloading. communication with cargo
officer & Terminal control room, safety watch like gas detection, proximity limits of unloading arm, emergency
shut down
 Supervise the activities of jetty Loading Assistants Participate in emergency preparedness exercises.
 Maintenance Coordination / Emergency Response Draw up of loading and offloading plans.
 Responsible of quality and quantity for Terminal operations
Handles all paperwork and coordinates with all parties
Special Training & safety courses attended :
Basic training on usage of personal safety devices, Mock drill on emergency attendance , Human Relations & Psychology
Team building etc.

SPIC – Creative Improvements:

 Ammonia transfer pump discharge valve u/s Auto recirculation valve fixed.
 PUF insulated ammonia chiller implemented- ammonia back pumping operation for energy saving, control tank
pressure & avoid NH3 venting to flare.
 Ammonium carbomate pump barrel passivaion (chromic oxide layer to protect cracking).
 New product (Bentonite sulphur (Ratio9S:1B) fertilizer project proposal PPT). Raw material molten sulphur from
existing H2SO4 plant molten pit.
 Steam Reformer catalyst loading / unloading period tube top temporary wooden plug designed.

DFPCL- Creative Improvements:

 Project- Ammonia loading period Fin cooler condensing water sump with centrifugal pump insulated – used the
water cooling tower make up.
 NH3 pump suction barrel hot NH3 vapour line for pressure rising 1/2inch line hook up from ammonia compressor
discharge.
 Cyclone separator installed to recovery Bentonite & dust recovery system.
 Shell & tube cooler installed for pre heat the NH3 Vs cooling water-reduce the energy saving from Fin cooler.
  Mass flow meter installed in feed line to batch reactor.

. EXTRA CURRICULARA ACTIVITIES: Best Physique

September–2007 Participated &obtained Mr.TamilNadu– 2nd place (70kg) conducted by TNABBA
Sep-2006 & Oct-2009 Participated & obtained 2nd place Mr.Thiruvallur Dist. (65kg) conducted by TDABBA.
FEB–2018 Participated &obtained Mr. TamilNadu– 2nd place (85kg) conducted by TNABBA
MAY–2018 Participated &obtained Mr. SOUTH INDIA– 3nd place (85kg) conducted by SIBBA

Reference:
S.R RAMAKRISHANAN SPIC WTD – 9842188801.
Dr. L. Jayanthi Ph.D. - 7845159545.

DECLARATION

I, hereby, certify that the above information is true and correct to the best of my knowledge and belief.

Yours Faithfully,

S SENTHILNATHAN