Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    eskkkd

    Uploaded by

    suryain456

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    eskkkd

    Uploaded by

    suryain456
    3 views3 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views3 pages

    eskkkd

    Uploaded by

    suryain456

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    MODEL: KD

    Plug-in Signal Conditioners K-UNIT C: 110 V AC


    D: 115 V AC
    F: 120 V AC
    CURRENT LOOP SUPPLY G: 200 V AC
    (non-isolated) H: 220 V AC
    Functions & Features J: 240 V AC
    • Powering a 4 – 20 mA DC current loop
    • Output voltage 24 V or 42 V
    • Electrically isolating output signal from power input [3] OPTIONS
    • Shortcircuit protection blank: none
    • Applicable to smart transmitters /Q: With options (specify the specification)
    • High-density mounting
    SPECIFICATIONS OF OPTION: Q (multiple selections)
    Typical Applications COATING (For the detail, refer to our web site.)
    • Various 2-wire transmitters /C01: Silicone coating
    • 42 V output provides increased loop drive /C02: Polyurethane coating
    50 /C03: Rubber coating
    (1.97)
    TERMINAL SCREW MATERIAL
    /S01: Stainless steel
    80
    K-UNIT
    (3.15)
    RELATED PRODUCTS
    • Resistor module (model: REM-250)
    123
    (4.84)
    mm (inch)
    GENERAL SPECIFICATIONS
    Construction: Plug-in
    Connection: M3.5 screw terminals
    MODEL: KD–[1]–[2][3]
    Screw terminal: Chromated steel (standard) or stainless
    steel
    ORDERING INFORMATION Housing material: Flame-resistant resin (black)
    • Code number: KD-[1]-[2][3] Isolation: Input or output to power
    Specify a code from below for each of [1] through [3].
    (e.g. KD-24-B/Q)
    SUPPLY OUTPUT
    • Specify the specification for option code /Q
    Output voltage (with no load):
    (e.g. /C01/S01)
    24 V use: 24 – 28 V DC
    42 V use: 39 – 43 V DC
    [1] SUPPLY OUTPUT Current rating: ≤ 22 mA DC
    24: 24 V DC • Shortcircuit Protection
    42: 42 V DC Current limited: 40 mA max.
    Protected time duration: No limit

    INPUT
    Current INSTALLATION
    4 – 20 mA DC Supply voltage
    Operational voltage range: Rating ±10 %
    50/60 ±2 Hz
    OUTPUT
    Approx. 2 VA (KD-24)
    Current
    Approx. 3.2 VA (KD-42)
    4 – 20 mA DC
    Operating temperature: -5 to +55°C (23 to 131°F)
    Operating humidity: 30 to 90 %RH (non-condensing)
    [2] POWER INPUT Mounting: Surface or DIN rail
    AC Power Weight: 300 g (0.66 lb)
    B: 100 V AC
    KD SPECIFICATIONS ES-3592 Rev.10 Page 1/3

    MG CO., LTD.
    www.mgco.jp
    MODEL: KD
    PERFORMANCE in percentage of span
    Line voltage effect
    KD-24: ±0.5 % over voltage range
    KD-42: ±1 % over voltage range
    Insulation resistance: ≥ 100 MΩ with 500 V DC
    Dielectric strength: 2000 V AC @1 minute (input or output
    to power to ground)

    EXTERNAL DIMENSIONS unit: mm [inch]


    CLAMP
    (top & bottom)
    7.8 [.31]

    [.79]
    20
    DIN RAIL
    35mm wide 6 5 4 3
    80 [3.15]

    80 [3.15]
    2–4.5 [.18] dia.
    MTG HOLE
    15 [.59] deep
    7 8 1 2
    8–M3.5
    SCREW
    50 [1.97] 103 [4.06] 40 [1.57]
    123 [4.84] (3.3 [.13]) 50 [1.97]

    • When mounting, no extra space is needed between units.

    TERMINAL ASSIGNMENTS unit: mm [inch]


    OUTPUT RESISTOR
    (model: REM)

    6 5 4 3
    12 (.47)

    7 8 1 2

    Use output shunt resistor


    for voltage output.

    KD SPECIFICATIONS ES-3592 Rev.10 Page 2/3

    MG CO., LTD.
    www.mgco.jp
    MODEL: KD
    SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

    2-WIRE
    TRANSMITTER
    – – 6 * +
    3
    R OUTPUT 1
    Current
    + + 1 4 –
    Limiter
    **
    5 +
    OUTPUT 2
    2 –

    7 U
    POWER
    8 V

    Base Socket

    * Use output shunt resistor for voltage output.


    **Be sure to short-circuit if not using output 2.
    Note: Use 250Ω load resistance when combined with a smart transmitter.

    Specifications are subject to change without notice.

    KD SPECIFICATIONS ES-3592 Rev.10 Page 3/3

    MG CO., LTD.
    www.mgco.jp

    You might also like