Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
3 views

Assignment 1

This document outlines a series of electrical engineering assignment questions due by February 28, 2025. The questions cover various topics including resistance calculations, current and voltage analysis in circuits, power dissipation, and equivalent resistance for different circuit configurations. Additionally, it involves the use of nodal and mesh analysis techniques across multiple figures.

Uploaded by

alwaysuse171311
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

Assignment 1

This document outlines a series of electrical engineering assignment questions due by February 28, 2025. The questions cover various topics including resistance calculations, current and voltage analysis in circuits, power dissipation, and equivalent resistance for different circuit configurations. Additionally, it involves the use of nodal and mesh analysis techniques across multiple figures.

Uploaded by

alwaysuse171311
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Assignment 1

Submission due by February 28, 2025

1. An electric iron draws 2 A at 120 V. Find its resistance.


2. The essential component of a toaster is an electrical element (a resistor) that converts electrical
energy to heat energy. How much current is drawn by a toaster with resistance 15 ohm at 110 V?
3. In the circuit shown in Fig. 1, calculate the current i, the conductance G, and the power p.

Figure 1 Figure 2 Figure 3

4. A resistor absorbs an instantaneous power of 30 cos2t mW when connected to a voltage source v


= 15 cos t V. Find i and R.
5. Find voltages v1 and v2 for i) Fig. 2 and ii) Fig. 3.
6. Determine the voltage current and power in i) Fig. 4 and ii) Fig. 5.

Figure 5 Figure 6
Figure 4

7. Find current I0 and voltage v0 in the circuit shown in i) Fig. 6 and ii) Fig. 7.

Figure 7 Figure 8 Figure 9

8. Find currents and voltages in the circuit shown in i) Fig. 8 and ii) Fig. 9.
9. Find Equivalent resistance for the circuit shown in i) Fig. 10 ii) Fig. 11 iii) Fig. 12 iv) Fig. 13.v) Fig. 14
vi) Fig. 15. Also determine I in Fig. 15.

Figure 10 Figure 11
Figure 12

Figure 13 Figure 14

Figure 15
10. Find i0 and v0 in the circuit shown in Fig. 16. Calculate the power dissipated in the 3-ohm resistor.

Figure 16 Figure 17 Figure 18


11. Find v1 and v2 in the circuit shown in Fig.17. Also calculate i1 and i2 and the power dissipated in
the 12 ohm and 40-ohm resistors.
12. Convert the delta network in Fig 18 to an equivalent Y network.
13. Obtain the equivalent resistance for the circuit and use it to find i) current i in Fig. 19 ii) current
i and V0 in Fig. 20 iii) current i0 in Fig. 21.

Figure 19 Figure 20 Figure 21


14. Obtain the equivalent resistance at the terminals a-b for each of the circuits in Fig. 22.

Figure 24
Figure 22 Figure 23

15. Calculate the node voltages in the circuit shown in i) Fig. 23 ii) Fig. 24 iii) Fig. 25 iv) Fig.26.

Figure 25
Figure 26
16. Calculate the node voltages in the circuit using super node.

Figure 27
Figure 29
Figure 28
17. Find v and i in the circuit of Fig. 30.

Figure 30 Figure 31
Figure 32
18. Find the branch currents using mesh /super mesh analysis in i) Fig. 31 ii) Fig. 32 iii) Fig. 33 iv)
Fig. 34 v) Fig. 35.

Figure 35
Figure 33
Figure 34
19. Find node voltages in i) Fig. 36 ii) Fig. 37 iii) Fig. 38 iv) Fig. 39 v) Fig. 40.

Figure 36
Figure 37 Figure 38

Figure 39
Figure 40

20. Using nodal analysis, find v0 in the circuit of i) Fig. 41 ii) Fig. 42 and iii) find i0 in Fig. 43 and the power
dissipated in each resistor

Figure 41
Figure 42 Figure 43
21. Use mesh analysis to obtain branch current for i) Fig. 44 ii) Fig. 45 iii) Fig. 46.

Figure 44

Figure 45 Figure 46

22. Apply mesh analysis to the circuit in i) Fig. 47 ii) Fig. 48 iii) Fig. 49 and obtain Io.

Figure 49

Figure 47 Figure 48

You might also like