Paladin DesignBase Programs

Paladin DesignBase Programs
TM
Simulation Solutions for Every Electrical Engineering Challenge
Power Analytics offers the industrys most extensive and comprehensive family of solutions modules. These software modules enable users to easily perform highlyaccurate simulations of their infrastructure design under an almost unlimited range of operating conditions, system parameters, and fault scenarios. Extending our basic power flow analysis, these solutions modules offer advanced analytical modules for every aspect of a mission critical power system design; thus, users can fully simulate and understand the pre- and post-operational behavior of their infrastructure. Our analytical techniques employ vendor-specific device information, as well as advanced mathematical and applied physics to simulate, optimize, modify and create power systems designs. They consider all aspects of power generation, filtering and transmission and distribution of power and associated power protection strategies. Powerful what if? capabilities extend to every aspect of the advanced design, allowing user to stress and verify nominal or steady state designs with extraordinary accuracy and real-world simulations. Categories of Solutions Modules include:
Quickly identify the grade of clothing required by operators and easily provide protective signs for electrical equipment stating the type of protective clothing required when working around energized equipment. AC and DC Arc Heat per NFPA-70E and /IEEE-1584
Fault Analysis
Quickly and accurately calculate the effects of flowing faults in three-phase, single-phase and DC power distribution systems. AC Short Circuit 3phase and 1phase ANSI/IEEE AC Short Circuit IEC 60909 AC Short Circuit IEC 61363
Reliability and Capacity
Allows engineers to accurately and efficiently evaluate the reliability of electrical distribution systems. Load Forecasting Block Based Reliability Analysis Distribution and Substation Reliability Analysis
Protection Coordination
Arc Flash Simulation
Based on test results given in IEEE-1584 and recommendations of NFPA-70E, this powerful tool helps safety engineers estimate the energy falling on a surface removed from a fault.
Designed for coordination of protective devices in DC power systems, including transmission networks requiring Distance Relay Coordination. It provides engineers with a very strong, efficient, and fast tool for selecting, comparing, and coordinating protective devices. Device Coordination AC Device Coordination DC Impedance Relay Coordination Validated Protective Device Curve Library
Power Analytics Corporation
16870 West Bernardo Drive, San Diego, CA, 92127
Phone:858.675.9211 www.poweranalytics.com
Paladin DesignBase Programs

TM
Simulation Solutions for Every Electrical Engineering Challenge
Power Flow Analysis
Enable users to conduct balanced three-phase and single phase load flow studies on almost any network configuration imaginable. This load flow program uses sparsity techniques for the load flow solution; it applies bus admittance matrix plus two iterative methods (fast decoupled, or Newton-Raphson,Gauss-Seidel,etc) to obtain the desired results at all buses in the network. AC Multi Motor Starting Power Flow AC Advanced Power Flow 3phase, 1phase AC/DC Power Flow DC Power Flow AC Voltage Profile
Power Quality Analysis and Mitigation
Harmonic analysis is required when devices that generate harmonics, such as rectifiers, arc furnaces, AC/DC drives etc, are present or anticipated to be added to the power system. Digital computer simulation is the most convenient, and perhaps more economical, way of tackling the problem of harmonic analysis. Harmonics Analysis with Automatic Filter Sizing
Sizing Optimization
Power Systems Optimization
The PSO platform is a security-constrained optimal power flow software that also serves as a tool for optimal sizing and placement of reactive power resources (reactors, capacitors, and SVC). It is capable of handling power systems comprising thousands of buses, and has been used to optimize the planning and operation of some of the worlds largest and most complex power systems.
Dynamic Behavior Simulation
Allows power systems specialists to simulate all known phenomena and disturbances. Based on Power Analytics exclusive advanced trapezoidal simulation engine, considered to be the most powerful and accurate means of simulating transient events, this robust, flexible, and fast tool offers a productive and effective platform for creating user-defined AVR and Governor models. Universal Control Logic Simulator Advanced Transient Advanced Motor Torque and Performance Electromagnetic Transient Analysis (EMTAP)
A library of proven, powerful solutions for a wide range of frequently-used sizing tasks. Battery Sizing Cable Ampacity N-M and IEC Generator Set Sizing Wire and Conduit Sizing Bare Wire Sizing Short Line Parameters Transmission Line Constants with EM field calculation Transmission Line Sag and Tension Reactor Sizing Capacitor Sizing & Optimization Electrical Schedules Motor Parameter Estimations Cable Pulling Ground Grid Design
Power Analytics Corporation
16870 West Bernardo Drive, San Diego, CA, 92127
Phone:858.675.9211 www.poweranalytics.com

Paladin DesignBase Programs

Uploaded by

Copyright:

Available Formats

Paladin DesignBase Programs

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Paladin DesignBase Programs

Uploaded by

Copyright:

Available Formats

Paladin DesignBase Programs

Simulation Solutions for Every Electrical Engineering Challenge

Reliability and Capacity

Arc Flash Simulation

Power Analytics Corporation

16870 West Bernardo Drive, San Diego, CA, 92127