Professional Documents
Culture Documents
Lifting Eye Bolts (Rotating) : Technical Informations
Lifting Eye Bolts (Rotating) : Technical Informations
technical informations Body High-tensile forged tempered steel with pink plastic surface coating, 100% electro-magnetic tensile tested to EN 1677. - Type B: with spanner. - Type A: without spanner. Bolt
Steel, class 10.9 (tensile strength 1000 N/mm2 ). Features and applications The lifting eye bolts GN 581 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4). The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite. Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 98 / 37 / CE and are BG tested. The hexagon socket bolt cannot be removed from the ring. Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand. Application and assembly information The loads given in brackets refer to the load capacity of the corresponding lifting eye bolt DIN 580. If such a value is not indicated the use of the lifting eye bolts DIN 580 is not permitted! The bolt-on surface for the lifting eye bolts GN 581 must be plane and at a right angle to the threaded borehole; the countersinkingmustbethenominaldiameterofthethread. Screwed in, the collar of the screw must make firm contact (do not use washers) and the eye bolt must rotate freely by 360. Before applying the load, turn the lifting eye bolt in the direction of the force. The lifting eye bolt is not suitable for frequent rotation cycles under load. The specified load values apply for a minimum screw-in length of 1 nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm, at an ambient temperature of 40 C to + 280 C. Load-bearing capacity under different conditions upon request. Operating instructions with more details and specifications are included with every delivery.
Standard Elements Description GN 581-M8-A GN 581-M8-B GN 581-M10-A GN 581-M10-B GN 581-M12-A GN 581-M12-B GN 581-M16-A GN 581-M16-B GN 581-M20-A GN 581-M20-B GN 581-M24-A GN 581-M24-B GN 581-M30-A GN 581-M30-B GN 581-M36-A GN 581-M36-B d1 M8 M8 M10 M10 M12 M12 M16 M16 M20 M20 M24 M24 M30 M30 M36 M36 d2 15 15 15 15 18 18 22 22 27.5 27.5 33 33 41.5 41.5 49.5 49.5
Main dimensions d3 25 25 25 25 30 30 35 35 40 40 50 50 60 60 75 75 d4 28 28 28 28 34 34 40 40 50 50 60 60 75 75 90 90 d5 25 25 25 25 30 30 35 35 40 40 48 48 60 60 72 72 h 45 45 45 45 55 55 64 64 74 74 90 90 112 112 135 135 k1 8.5 8.5 8.5 8.5 10 10 14 14 16 16 19 19 24 24 29 29 k2 47 47 47 47 56 56 65 65 75 75 90 90 112 112 135 135 Nominal load l 12 12 15 15 18 18 24 24 30 30 36 36 45 45 54 54 0.4 t [4 kN] 0.4 t [4 kN] 0.4t [4 kN] 0.4t [4 kN] 0.75 t [7.5 kN] 0.75 t [7.5 kN] 1.5 t [15 kN] 1.5 t [15 kN] 2.3 t [23 kN] 2.3 t [23 kN] 3.2 t [32 kN] 3.2 t [32 kN] 4.5 t [45 kN] 4.5 t [45 kN] 7.0 t [70 kN] 7.0 t [70 kN]
Weight g 100 130 106 185 170 250 323 345 520 555 521 550 1750 1800 3050 3050