2001-2004 Ford Mustang 2003-2006 Ford Expedition 2002-2005 Ford Explorer 2003-2006 Lincoln Navigator 2002-2005 Lincoln Aviator 2002-2005 Mercury Mountaineer
2001-2004 Ford Mustang 2003-2006 Ford Expedition 2002-2005 Ford Explorer 2003-2006 Lincoln Navigator 2002-2005 Lincoln Aviator 2002-2005 Mercury Mountaineer
2001-2004 Ford Mustang 2003-2006 Ford Expedition 2002-2005 Ford Explorer 2003-2006 Lincoln Navigator 2002-2005 Lincoln Aviator 2002-2005 Mercury Mountaineer
APPLICATIONS 2001-2004 Ford Mustang 2003-2006 Ford Expedition 2002-2005 Ford Explorer 2003-2006 Lincoln Navigator 2002-2005 Lincoln Aviator 2002-2005 Mercury Mountaineer
95-5026
KIT FEATURES
Double DIN head unit provision Stacked ISO DIN head unit provision
KIT COMPONENTS
A) DDIN Trim Plate | B) DDIN Brackets | C) Rear Support Bracket
B
TOOLS REQUIRED:
Phillips Screwdriver I Socket wrench
1-800-221-0932
www.metraonline.com
95-5026
T ABLE OF CONTENTS
Dash Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
95-5026
DASH DISASSEMBL Y
Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip and remove shift lever trim panel. (Figure A) Unclip and remove the entire panel surrounding the radio and climate controls including the vents. (Figure B) Remove (2) 9/32 screws securing radio. (Figure B)
95-5026
DASH DISASSEMBL Y
95-5026
DASH DISASSEMBL Y
Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip and remove entire panel surrounding radio including climate controls and vents. (Figure A) Remove (2) 9/32 screws securing radio. (Figure B)
B
95-5026
DASH DISASSEMBL Y
Disconnect the negative battery terminal to prevent an accidental short circuit. Open center console and remove (1) push pin from back of power window switch panel. (Figure A) Unclip and remove panel. Remove (2) 9/32 screws exposed on shifter panel then unclip and move shifter panel off to side. (Figure B,C) Remove (2) 9/32 screws exposed under ashtray assembly. (Figure C) Unclip and remove entire panel surrounding climate controls and radio.
C B
INSIDE CENTER CONSOLE TOP VIEW
3 4
7 5 7
95-5026
DASH DISASSEMBL Y
Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip and remove vent panel above radio on top of dashboard. (Figure A) Remove (2) 9/32 screws exposed under panel removed in step 1. (Figure B) Unclip and remove panel around radio with door in it. (Figure C) Unclip and remove vents below radio. Figure D) Remove (2) 9/32 screws securing radio. (Figure E)
105.9
95-5026
KIT ASSEMBL Y
Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A) Slide the DDIN radio unit into the trim plate bracket assembly and secure the unit to the kit using the screws supplied with the head unit. (Figure B) Position the rear support bracket with slide grooves facing down and secure to the back of the aftermarket radio with the hardware supplied with aftermarket head unit. (Figure C)
B
95-5026
KIT ASSEMBL Y
Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A) Slide the stacked ISO DIN units into the trim plate bracket assembly and secure the units to the kit using the screws supplied with the head units. (Figure B) Position the rear support bracket with slide grooves facing down and secure to the back of the aftermarket radio with the hardware supplied with aftermarket head unit. (Figure C)
B
95-5026
FINAL ASSEMBL Y
FINAL ASSEMBL Y
1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disassembly.
*NOTE: When Black a wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturers specifications.
95-5026
NOTES
95-5026 INSTRUCTIONS
1-800-221-0932
REV. 01/25/06
www.metraonline.com
INST95-5026