The Osi Reference Model

THE OSI REFERENCE MODEL
OVERVIEW
THE NEED FOR STANDARDS OSI - ORGANISATION FOR STANDARDISATION THE OSI REFERENCE MODEL A LAYERED NETWORK MODEL THE SEVEN OSI REFERENCE MODEL LAYERS SUMMARY
THE NEED FOR STANDARDS
Over the past couple of decades many of the networks that were built used different hardware and software implementations, as a result they were incompatible and it became difficult for networks using different specifications to communicate with each other. To address the problem of networks being incompatible and unable to communicate with each other, the International Organization for Standardization (ISO) researched various network schemes. The ISO recognized there was a need to create a NETWORK MODEL that would help vendors create interoperable network implementations.
ISO - ORGANISATION FOR STANDARDIZATION

The International Organization for Standardization (ISO) is an International standards organization responsible for a wide range of Standards, including many that are relevant to networking. In 1984 in order to aid network interconnection without necessarily requiring complete redesign, the Open Systems Interconnection (OSI) reference model was approved as an international standard for communications architecture.

The model was developed by the International Organization for Standardization (ISO) in 1984. It is now considered the primary Architectural model for inter-computer communications. The Open Systems Interconnection (OSI) reference model is a descriptive network scheme. It ensures greater compatibility and interoperability between various types of network technologies. The OSI model describes how information or data makes its way from application programs (such as spreadsheets) through a network medium (such as wire) to another application program located on another network. The OSI reference model divides the problem of moving information between computers over a network medium into SEVEN smaller and more manageable problems. This separation into smaller more manageable functions is known as layering.
A LAYERED NETWORK MODEL

The OSI Reference Model is composed of seven layers, each specifying particular network functions. The process of breaking up the functions or tasks of networking into layers reduces complexity. Each layer provides a service to the layer above it in the protocol specification. Each layer communicates with the same layers software or hardware on other computers. The lower 4 layers (transport, network, data link and physical Layers 4, 3, 2, and 1) are concerned with the flow of data from end to end through the network. The upper four layers of the OSI model (application, presentation and sessionLayers 7, 6 and 5) are orientated more toward services to the applications. Data is Encapsulated with the necessary protocol information as it moves down the layers before network transit.
LAYER 1: PHYSICAL
The physical layer deals with the physical characteristics of the transmission medium. It defines the electrical, mechanical, procedural, and functional specifications for activating, maintaining, and deactivating the physical link between end systems. Such characteristics as voltage levels, timing of voltage changes, physical data rates, maximum transmission distances, physical connectors, and other similar attributes are defined by physical layer specifications. Examples :- EIA/TIA-232, RJ45, NRZ.
LAYER 2: DATA LINK

The data link layer provides access to the networking media and physical transmission across the media and this enables the data to locate its intended destination on a network. The data link layer provides reliable transit of data across a physical link by using the Media Access Control (MAC) addresses. The data link layer uses the MAC address to define a hardware or data link address in order for multiple stations to share the same medium and still uniquely identify each other. Concerned with network topology, network access, error notification, ordered delivery of frames, and flow control. Examples :- Ethernet, Frame Relay, FDDI.
LAYER 3: NETWORK
Defines end-to-end delivery of packets. Defines logical addressing so that any endpoint can be identified. Defines how routing works and how routes are learned so that the packets can be delivered. The network layer also defines how to fragment a packet into smaller packets to accommodate different media. Routers operate at Layer 3. Examples :- IP, IPX, AppleTalk.
LAYER 4: TRANSPORT
The transport layer regulates information flow to ensure end-to-end connectivity between host applications reliably and accurately. The transport layer segments data from the sending host's system and reassembles the data into a data stream on the receiving host's system. The boundary between the transport layer and the session layer can be thought of as the boundary between application protocols and data-flow protocols. Whereas the application, presentation, and session layers are concerned with application issues, the lower four layers are concerned with data transport issues. Layer 4 protocols include TCP (Transmission Control Protocol) and UDP (User Datagram Protocol).
LAYER 5: SESSION
The session layer defines how to start, control and end conversations (called sessions) between applications. This includes the control and management of multiple bi-directional messages using dialogue control. It also synchronizes dialogue between two hosts' presentation layers and manages their data exchange. The session layer offers provisions for efficient data transfer. Examples :- SQL, ASP(AppleTalk Session Protocol).
LAYER 6: PRESENTATION
The presentation layer ensures that the information that the application layer of one system sends out is readable by the application layer of another system. If necessary, the presentation layer translates between multiple data formats by using a common format. Provides encryption and compression of data. Examples :- JPEG, MPEG, ASCII, EBCDIC, HTML.
LAYER 7: APPLICATION
The application layer is the OSI layer that is closest to the user. It provides network services to the users applications. It differs from the other layers in that it does not provide services to any other OSI layer, but rather, only to applications outside the OSI model. Examples of such applications are spreadsheet programs, word processing programs, and bank terminal programs. The application layer establishes the availability of intended communication partners, synchronizes and establishes agreement on procedures for error recovery and control of data integrity.
SUMMARY
There was no standard for networks in the early days and as a result it was difficult for networks to communicate with each other. The International Organization for Standardization (ISO) recognized this and researched various network schemes, and in 1984 introduced the Open Systems Interconnection (OSI) reference model. The OSI reference model has standards which ensure vendors greater compatibility and interoperability between various types of network technologies. The OSI reference model organizes network functions into seven numbered layers. Each layer provides a service to the layer above it in the protocol specification and communicates with the same layers software or hardware on other computers. Layers 1-4 are concerned with the flow of data from end to end through the network and Layers 5-7 are concerned with services to the applications.

The Osi Reference Model

Uploaded by

Copyright:

Available Formats

The Osi Reference Model

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

The Osi Reference Model

Uploaded by

Copyright:

Available Formats

THE OSI REFERENCE MODEL

THE NEED FOR STANDARDS

ISO - ORGANISATION FOR STANDARDIZATION

THE OSI REFERENCE MODEL

A LAYERED NETWORK MODEL

THE OSI REFERENCE MODEL

LAYER 2: DATA LINK

You might also like