Professional Documents
Culture Documents
Non-Oriented Fully Process Electrical Steel - ASTM
Non-Oriented Fully Process Electrical Steel - ASTM
Non Oriented
Fully Processed
ASTM grades
Contents
Introduction
Quality assurance
Environmental management system
Research and development
Customer service
Quality logging system
Guaranteed magnetic properties at 60 Hz
Typical magnetic properties at 60 Hz
Typical core loss at 50 Hz
Typical physical and mechanical properties
Conventional density
Dimensions, ranges and tolerances
Coatings
SURALAC Coatings
National and international standards
Comparison of grades and standards
Conversion factors
Stress relief annealing
Applications
Typical data tables
Thin NO for medium to high frequencies
Coil weight and outside diameter
Page
2
3
3
3
3
4
5
6
7
8
8
9
10
11
12
13
13
14
14
15-24
25
26
Registered trademarks
SURALAC is a trademark used to describe the insulation applied to
Cogent fully processed non-oriented electrical steels.
Introduction
The range of non-oriented fully processed electrical steels is produced
by Cogent Power Ltd at Surahammars Bruks AB in Sweden and
Orb Electrical Steels Ltd in the UK. This publication describes that range
with data relating mainly to products manufactured at Surahammars
Bruks AB. These products comply with the latest specifications of the
American Society for Testing and Materials, the International
Electrotechnical Commission and the European Committee for
Standardization.
Quality assurance
The products described in this brochure
represent the latest stage in the development
of non-oriented fully processed electrical steels.
They are subjected to rigorous quality control
procedures throughout the processing routes.
The quality management systems of Orb
Electrical Steels Ltd and Surahammars
Bruks AB are approved by Lloyds Register
Quality Assurance Limited to the Quality
Management System Standards
EN ISO 9001/9002 (respectively) applicable
to the manufacture of electrical steels.
Environmental management
system
Surahammars Bruks AB and Orb Electrical
Steels Ltd both recognise that the protection
of the environment is a key priority of the
company and this ideal is fully integrated into
all aspects of the electrical steel business.
Management Systems of Surahammars
Bruks AB and Orb Electrical Steels Ltd have
been approved by Lloyds Register Quality
Assurance to the Environmental Management
System Standard EN ISO 14001 applicable to
the manufacture of electrical steels.
Customer service
The Technical, Research and Development
Group of Cogent Power Ltd is pleased to offer
a full consultancy service which is available to
customers who require specialist technical data
that may not be included in this brochure.
Server
Grade
ASTM
A677
36F135*
36F145
36F155
36F175
36F185
47F145*
47F155*
47F165
47F180
47F190
47F200
47F240
47F280
47F340*
64F190*
64F200
64F235
64F275
64F320
64F400*
Old
AISI
grade
Closest
EN 10106
grade
M-15
M-191)
M-271)
M-361)
M235-35A
M250-35A
M270-35A
M300-35A
M330-35A
inch
0.0140
0.0140
0.0140
0.0140
0.0140
M250-50A
M270-50A
M290-50A
M310-50A
M330-50A
M350-50A
M400-50A
M470-50A
M600-50A
0.0185
0.0185
0.0185
0.0185
0.0185
0.0185
0.0185
0.0185
0.0185
1.45
1.55
1.65
1.80
1.90
2.00
2.40
2.80
3.40
M330-65A
M350-65A
M400-65A
M470-65A
M530-65A
M700-65A
0.0250
0.0250
0.0250
0.0250
0.0250
0.0250
1.90
2.00
2.35
2.75
3.20
4.00
M-151)
M-221)
M-27
M-361)
M-431)
M-45
1)
M-19
M-361)
M-431)
M-45
Nominal
thickness
Core lossGrade
at 60 Hz
ASTM
1.5 T Maximum
A677
W/lb
1.35
1.45
1.55
1.75
1.85
Old
AISI
grade
M-15
M-191)
M-271)
M-361)
M-151)
M-221)
M-27
M-361)
M-431)
M-45
1)
M-19
M-361)
M-431)
M-45
Core loss at 60 Hz
Relative
Anisotropy Magnetic polarization at 60 Hz Coercivity
permeability of loss
(DC)
5000 10 000 A/m
H= 2500
at 60 Hz
%
T
T
T
A/m
1.5 T
W/lb
1.0 T
W/lb
1.26
1.32
1.39
1.48
1.66
0.51
0.55
0.56
0.62
0.68
610
660
700
830
860
10
10
10
10
10
1.53
1.53
1.54
1.55
1.56
1.64
1.64
1.65
1.65
1.66
1.76
1.76
1.77
1.78
1.78
35
40
40
45
45
1.37
1.45
1.51
1.63
1.75
1.81
1.97
2.32
2.96
0.59
0.62
0.66
0.71
0.74
0.76
0.84
1.02
1.33
740
770
800
970
1000
1020
1070
1070
1660
10
10
10
10
10
9
9
6
6
1.55
1.55
1.56
1.57
1.58
1.58
1.58
1.58
1.63
1.64
1.64
1.65
1.66
1.67
1.67
1.67
1.67
1.72
1.77
1.77
1.78
1.79
1.79
1.79
1.79
1.79
1.83
30
30
35
40
40
45
50
60
85
1.80
1.91
2.15
2.40
2.55
3.44
0.76
0.82
0.92
1.05
1.10
1.52
850
990
1050
1130
1150
1740
8
8
7
6
4
3
1.56
1.58
1.58
1.59
1.59
1.64
1.66
1.67
1.68
1.68
1.68
1.73
1.78
1.79
1.79
1.80
1.80
1.84
40
40
45
50
60
85
The guaranteed loss of the grade differs from the old AISI standard.
Ageing
Cogent non-oriented fully processed electrical
steels are free from magnetic ageing.
Ageing, or the increase of power loss with
time, is caused by an excessive carbon content
in the steel. The carbon content is continuously
monitored by state-of-the-art analytical
equipment to ensure freedom from ageing.
Old AISI
grade
M-15
M-191)
M-271)
M-361)
M-151)
M-221)
M-27
M-361)
M-431)
M-45
M-191)
M-361)
M-431)
M-45
2.52
2.69
2.86
3.12
3.30
3.47
4.17
4.89
5.94
1.08
1.14
1.19
1.28
1.37
1.42
1.55
1.84
2.35
2.38
2.52
2.62
2.83
3.03
3.14
3.42
4.05
5.17
1.46
1.53
1.81
2.11
2.48
3.10
3.21
3.38
3.98
4.65
5.46
6.83
1.38
1.47
1.65
1.84
1.97
2.67
3.04
3.23
3.63
4.06
4.35
5.88
M-151)
M-221)
M-27
M-361)
M-431)
M-45
1)
M-19
M-361)
M-431)
M-45
Yield
strength
Tensile
strength
Youngs modulus
psi
psi
RD
psi
TD
psi
HV5
HR30T
7.60
7.60
7.65
7.65
7.65
59
55
52
50
44
66700
65900
65200
53600
43500
84100
83300
81900
71000
62300
2.68107
2.68107
2.68107
2.68107
2.90107
2.90107
2.90107
2.90107
2.90107
3.19107
220
215
215
185
150
73
72
72
68
62
7.60
7.60
7.60
7.65
7.65
7.65
7.70
7.70
7.75
59
55
55
52
50
44
42
39
30
68800
68100
67400
55800
54300
44200
44200
43500
41300
85500
84800
84100
72500
71700
65200
64500
63000
58700
2.54107
2.54107
2.68107
2.68107
2.68107
2.90107
2.90107
2.90107
3.04107
2.75107
2.75107
2.90107
2.90107
2.90107
3.04107
3.04107
3.04107
3.19107
220
220
220
190
185
165
160
155
125
73
73
73
69
68
65
64
63
55
7.60
7.60
7.65
7.65
7.70
7.75
55
52
44
42
39
30
66700
54300
44900
44200
43500
42000
84800
71000
65200
64500
61600
57200
2.68107
2.68107
2.68107
2.68107
2.75107
3.04107
2.97107
2.97107
2.97107
2.97107
3.04107
3.19107
220
185
165
160
145
125
73
68
65
64
61
55
Hardness
The guaranteed loss of the grade differs from the old AISI standard.
Conventional density
For test purposes, conventional densities in
the table above are used. These are according
to European and International standards.
Dimensions
Cogent non-oriented fully processed electrical
steels are supplied as slit coils or cut sheet in
the following thicknesses and widths:
Nominal
thickness
inch
0.0140
0.0185
0.0250
46.1
49.2
49.2
137.8
137.8
137.8
Up to and
including
inch
Width
tolerance
inch
0.4
5.9
11.8
23.6
39.3
5.9
11.8
23.6
39.3
49.2
0/+0.008
0/+0.012
0/+0.020
0/+0.039
0/+0.059
Up to and
including
inch
Width
tolerance
inch
0.4
11.8
23.6
11.8
23.6
49.2
0.003
0.008
0,012
Over
inch
15.7
30
60
96
120
Up to and
including
inch
ASTM A677
length tolerance
inch
30
60
96
120
144
+0.125/-0
+0.250/-0
+0.500/-0
+0.750/-0
+1.000/-0
European
length tolerance
%
-0/+0.5
-0/+0.5 (or max 6 mm)
-0/+0.5 (or max 6 mm)
-0/+0.5 (or max 6 mm)
-0/+0.5 (or max 6 mm)
+/-0.0015
+/-0.0015
+/-0.0020
0.0138
0.0197
0.0256
European
tolerance
Cogent Sura
typical variation
inch
inch
+/-0.0011
+/-0.0016
+/-0.0015
+0.0003/-0.0007
+0.0004/-0.0010
+0.0005/-0.0012
Alternative tolerances
These may be possible for specific orders.
Geometric characteristics
Cogent non-oriented, fully processed electrical
steels meet all the requirements on taper,
camber and flatness specified in ASTM A677.
1) Tolerances according to European Standard, which also fulfils requirements
according to ASTM A677.
2) A nomogram on page 25 shows the coil weight as a function of outside
diameter and strip width.
3) Tolerances according to European Standard, which also fulfils requirements
according to ASTM A677 (except for cut lengths between 25.2 inch and
30.0 inch as can be seen from the table).
4) The European nominal thicknesses are conversions from metric:
0.0138 inch = 0.35 mm, 0.0197 inch = 0.50 mm, 0.0256 inch = 0.65 mm
where the strip is rolled to European standards. Suras control of thickness
tolerances is more stringent than ASTM A677 resulting in final products for
thicknesses 0.0140 inch and 0.0250 inch remaining within specification. The
nominal metric version of the 0.0185 inch thickness however, can be at a
minimal variance. Sura's control of this variance gives a likelihood of less than
5% in terms of number of coils outside the ASTM + tolerance and no coils
outside +0.0020 inch of the ASTM nominal thickness.
Coatings
The surface of Cogent non-oriented fully
processed electrical steel is clean, smooth and has
a very thin layer of oxide. To improve surface
insulation resistance, grades are normally supplied
with insulating coatings. Coatings have differing
properties and the thickness can be varied,
normally ranging from 40 to 120 inch.
All coatings have excellent adherence and
Coating properties
Weldability
Insulation
resistance
Increased
inorganic
content
Increased
organic
content
Coating thickness
Coating thickness
Punchability
Burr height
Uncoated
Organic
Inorganic
Semi-organic
Semi-organic
Organic
Inorganic
Weldability
10
SURALAC Coatings
Designation
Type
Semi-organic
Previous designation
C-3
C-6
C-3
C-6
C-4 / C-5 1)
25-235 inch
25 - 45 inch
25 - 135 inch
Standard thickness
100 inch
235 inch
45 inch
60 inch
Colour
Clear to brown
Grey
Brown to grey
Grey
Temperature capability
in air (continuous)
355 F
355 F
390 F
445 F
Temperature capability
in inert gas (intermittent)
840 F
930 F
930F
1560 F
YES
YES
YES
YES
YES
YES
YES
Stamping lubricants 3)
Transformer oils
Freon
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
8-9H
8-9H
8-9H
9H
Typical thickness,
inch per side
25
Typical welding 4)
Typical punching 4)
exc
Surface insulation
resistance
(Franklin ASTM A 717):
Typical value,
cm2 per lamination
Typical value,
Amperes per side
Description
Withstands:
Stress relief annealing2)
Burn-out repair
Aluminium casting
Chemical resistance:
100
235
135
235
25
45
25
60
135
spec
spec
exc
exc
exc
good
mod
exc
good good
mod
good
exc
good good
mod
100
>200 >200
>200
20
50
>200
<0.03
0.55
0.25
0.55
0.11
<0.03
11
Metric
12
EN 10106
(1995)
Core loss
1.5 T. 60 Hz
W/lb
IEC
60404-8-4
(1998)
JIS
C2552
(2000)
GOST
Previous
21427.2 Cogent grade
(1983)
(1987)
1.35
36F135*
M235-35A
1.35
M235-35A5
(35A230)
1.45
36F145
M-15
1.45
(M250-35A)
1.42
(M250-35A5)
(35A250)
(2413)
(CK-27)
(CK-30)
1.55
36F155
(M-19)
1.58
(M270-35A)
1.52
(M270-35A5)
(35A270)
(2412)
(CK-33)
1.75
36F175
(M-27)
1.80
(M300-35A)
1.70
(M300-35A5)
(35A300)
(2411)
(CK-37)
1.85
36F185
(M-36)
1.90
M330-35A
1.87
M330-35A5
CK-40
1.45
47F145*
M250-50A
1.46
M250-50A5
50A250
1.55
47F155*
M270-50A
1.57
M270-50A5
50A270
2414
CK-26
1.65
47F165
(M-15)
1.68
(M290-50A)
1.68
(M290-50A5)
(50A290)
(2413)
(CK-27)
1.80
47F180
(M-22)
1.85
M310-50A
1.79
M310-50A5
50A310
2412
CK-30
1.90
47F190
M-27
1.90
M330-50A
1.91
M330-50A5
2.00
47F200
(M-36)
2.05
M350-50A
2.02
M350-50A5
50A350
(2411)
CK-37
2.40
47F240
(M-43)
2.30
(M400-50A)
2.31
(M400-50A5)
(50A400)
(2216)
(CK-40)
2.80
47F280
M-45
2.80
(M470-50A)
2.68
(M470-50A5)
(50A470)
(2214)
(CK-44)
3.40
47F340*
M600-50A
3.42
M600-50A5
50A600
2112
DK-66
1.90
64F190*
(M330-65A)
1.95
(M330-65A5)
2.00
64F200
(M-19)
2.08
(M350-65A)
2.07
(M350-65A5)
2.35
64F235
(M-36)
2.40
M400-65A
2.36
M400-65A5
CK-37
2.75
64F275
(M-43)
2.70
(M470-65A)
2.78
(M470-65A5)
(CK-40)
3.20
64F320
M-45
3.20
4.00
64F400*
CK-33
(M530-65A)
3.10
(M530-65A5)
(CK-44)
(M700-65A)
4.07
(M700-65A5)
(DK-66)
Conversion factors
1 Tesla (T) = 1 Weber/m2 (Wb/m2) = 10000 Gauss = 64.5 kilolines/sq.in.
1 A/m = 0.01 A/cm = 0.0254 A/in = 0.01257 Oersted
1 W/lb = 2.205 W/kg (at the same frequency)
1 VA/lb = 2.205 VA/kg (at the same frequency)
1 N/mm2 (MPa) = 145.0 psi (lbs/sq.in.)
1 inch = 25.4 mm
1 kg = 2.20 lbs
13
Applications
Stress zone
Deformation zone
The table lists examples of suitable Cogent grades for various applications.
36F135
36F185
Batch annealing
Furnace bell
Laminations
Inner cover
Sand seal
Oil seal
47F145
47F200
47F240
47F340
47F340
64F190
64F200
64F235
64F400
64F400
Laminations
Conveyer rollers
14
36F135*
36F145
36F155
36F175
36F185
47F145*
47F155*
47F165
47F180
47F190
47F200
47F240
47F280
47F340*
64F190*
64F200
64F235
64F275
64F320
64F400*
A.C. Magnetisation
pages 20-21
15
Old
AISI
grade
36F135*
36F145
36F155
36F175
36F185
M-15
0.01
0.03
0.06
0.11
0.16
0.21
0.28
0.34
0.43
0.0140
0.01
0.03
0.07
0.11
0.17
0.23
0.29
0.37
0.45
1)
0.0140
0.01
0.04
0.07
0.12
0.17
0.24
0.30
0.38
0.46
1)
0.0140
0.02
0.04
0.08
0.13
0.20
0.27
0.34
0.43
0.52
1)
0.0140
0.02
0.04
0.09
0.15
0.22
0.29
0.37
0.46
0.57
0.0185
0.01
0.04
0.07
0.12
0.17
0.24
0.31
0.40
0.49
M-19
M-27
M-36
47F145*
0.0185
0.01
0.04
0.08
0.13
0.19
0.26
0.33
0.42
0.52
47F165
1)
M-15
0.0185
0.02
0.04
0.08
0.14
0.21
0.28
0.36
0.45
0.55
47F180
M-221)
0.0185
0.02
0.04
0.09
0.15
0.23
0.30
0.39
0.49
0.59
47F190
M-27
47F155*
47F200
0.0185
0.02
0.05
0.10
0.16
0.23
0.31
0.40
0.51
0.62
1)
0.0185
0.02
0.05
0.10
0.16
0.24
0.32
0.42
0.52
0.64
1)
M-36
47F240
M-43
0.0185
0.02
0.05
0.11
0.18
0.26
0.35
0.46
0.57
0.70
47F280
M-45
0.0185
0.02
0.05
0.13
0.21
0.31
0.43
0.55
0.68
0.85
47F340*
0.0185
0.02
0.09
0.18
0.30
0.44
0.58
0.74
0.92
1.11
64F190*
0.0250
0.01
0.04
0.09
0.15
0.22
0.31
0.41
0.51
0.63
64F200
M-191)
0.0250
0.01
0.04
0.10
0.17
0.24
0.34
0.44
0.55
0.68
64F235
1)
0.0250
0.02
0.06
0.11
0.19
0.28
0.38
0.49
0.62
0.76
1)
M-36
64F275
M-43
0.0250
0.02
0.06
0.12
0.21
0.30
0.43
0.56
0.70
0.87
64F320
M-45
0.0250
0.03
0.06
0.13
0.22
0.33
0.45
0.58
0.74
0.91
0.0250
0.03
0.10
0.20
0.33
0.48
0.64
0.82
1.02
1.26
64F400*
16
of
1.00
1.10
1.20
1.30
1.40
1.50
1.60
1.70
1.80
0.51
0.61
0.73
0.87
1.08
1.26
1.42
1.54
1.65
0.55
0.64
0.77
0.92
1.12
1.32
1.49
1.61
1.72
0.56
0.67
0.80
0.95
1.19
1.39
1.57
1.71
1.83
0.62
0.73
0.87
1.03
1.24
1.48
1.68
1.84
1.93
0.68
0.81
0.95
1.13
1.38
1.66
1.97
2.21
2.40
0.59
0.70
0.82
0.96
1.16
1.37
1.56
1.71
1.84
0.62
0.73
0.86
1.01
1.23
1.45
1.66
1.81
1.95
Old
AISI
grade
Grade
ASTM
A677
36F135*
36F145
M-15
1)
36F155
1)
36F175
1)
36F185
M-19
M-22
M-36
47F145*
47F155*
1)
0.66
0.78
0.91
1.05
1.30
1.51
1.70
1.85
2.00
M-15
47F165
0.71
0.84
0.99
1.15
1.38
1.63
1.87
2.06
2.24
M-191)
47F180
0.74
0.88
1.04
1.22
1.47
1.75
2.01
2.22
2.40
M-27
47F190
0.76
0.91
1.07
1.26
1.51
1.81
2.11
2.35
2.55
1)
47F200
1)
M-36
0.84
1.00
1.18
1.39
1.66
1.97
2.28
2.53
2.75
M-43
47F240
1.02
1.20
1.42
1.68
1.98
2.32
2.67
2.97
3.20
M-45
47F280
1.33
1.57
1.84
2.16
2.54
2.96
3.40
3.78
4.05
47F340*
0.76
0.91
1.08
1.27
1.52
1.80
2.06
2.28
2.50
64F190*
0.82
0.98
1.16
1.36
1.63
1.91
2.18
2.41
2.63
M-191)
64F200
3.04
1)
64F235
1)
0.92
1.10
1.30
1.52
1.81
2.15
2.49
2.78
M-36
1.05
1.25
1.48
1.73
2.04
2.40
2.77
3.09
3.38
M-43
64F275
1.10
1.32
1.56
1.83
2.17
2.55
2.93
3.26
3.54
M-45
64F320
1.52
1.81
2.14
2.52
2.96
3.44
3.96
4.45
4.84
64F400*
17
Old
AISI
grade
36F135*
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
0.0140
0.02
0.07
0.13
0.20
0.28
0.37
0.48
0.60
0.75
36F145
M-15
0.0140
0.03
0.08
0.14
0.22
0.30
0.40
0.52
0.66
0.83
36F155
M-191)
0.0140
0.03
0.09
0.15
0.24
0.33
0.44
0.57
0.72
0.89
36F175
1)
0.0140
0.03
0.09
0.16
0.24
0.34
0.45
0.58
0.72
0.90
1)
0.0140
0.04
0.10
0.17
0.25
0.35
0.47
0.59
0.74
0.93
0.0185
0.03
0.09
0.17
0.25
0.36
0.47
0.62
0.78
0.98
36F185
M-27
M-36
47F145*
0.0185
0.04
0.10
0.17
0.26
0.37
0.49
0.63
0.80
0.99
47F165
1)
M-15
0.0185
0.04
0.10
0.17
0.26
0.37
0.49
0.63
0.80
0.99
47F180
M-221)
0.0185
0.04
0.10
0.18
0.27
0.38
0.50
0.64
0.80
0.99
47F190
M-27
47F155*
47F200
0.0185
0.04
0.10
0.18
0.28
0.39
0.51
0.66
0.83
1.03
1)
0.0185
0.04
0.10
0.18
0.28
0.40
0.53
0.67
0.84
1.05
1)
M-36
47F240
M-43
0.0185
0.04
0.12
0.21
0.32
0.44
0.58
0.74
0.92
1.12
47F280
M-45
0.0185
0.05
0.14
0.25
0.38
0.53
0.69
0.87
1.07
1.31
47F340*
0.0185
0.07
0.19
0.32
0.48
0.65
0.83
1.04
1.26
1.52
64F190*
0.0250
0.03
0.09
0.15
0.24
0.35
0.47
0.61
0.77
0.98
64F200
M-191)
0.0250
0.03
0.09
0.16
0.25
0.36
0.48
0.63
0.80
0.97
64F235
M-361)
0.0250
0.03
0.09
0.18
0.27
0.39
0.53
0.70
0.90
1.14
64F275
1)
M-43
0.0250
0.04
0.10
0.18
0.28
0.40
0.53
0.69
0.88
1.10
64F320
M-45
0.0250
0.05
0.13
0.25
0.37
0.52
0.68
0.87
1.08
1.33
0.0250
0.06
0.17
0.31
0.47
0.64
0.84
1.07
1.32
1.62
64F400*
18
1.10
1.20
1.30
1.40
1.50
1.60
1.70
1.80
0.94
1.19
1.58
2.43
5.60
17.6
46.0
88.1
149
1.05
1.35
1.80
2.71
5.60
16.3
41.1
83.2
145
1.12
1.41
1.85
2.67
5.24
15.2
39.3
81.1
144
1.12
1.40
1.82
2.58
4.69
12.9
34.9
75.1
139
1.15
1.44
1.87
2.66
4.75
12.4
33.7
73.4
137
1.22
1.54
2.00
2.83
5.29
14.5
37.3
77.8
143
1.24
1.56
2.00
2.81
5.10
13.8
35.9
75.7
140
Old
AISI
grade
Grade
ASTM
A677
36F135*
M-15
36F145
1)
36F155
1)
36F175
1)
36F185
M-19
M-22
M-36
47F145*
47F155*
1)
1.24
1.54
1.99
2.79
5.04
13.6
35.5
75.1
140
M-15
47F165
1.23
1.52
1.93
2.64
4.46
11.1
30.3
68.0
130
M-191)
47F180
1.28
1.59
2.02
2.75
4.53
10.8
29.8
67.5
130
M-27
47F190
1.29
1.59
2.02
2.71
4.40
10.6
29.6
67.5
130
1)
47F200
1)
M-36
1.37
1.68
2.09
2.77
4.35
10.1
28.2
65.9
129
M-43
47F240
1.59
1.94
2.41
3.15
4.77
10.2
27.6
64.8
126
M-45
47F280
1.81
2.15
2.58
3.17
4.19
7.03
17.3
45.0
95.9
47F340*
1.22
1.54
1.99
2.79
4.98
12.9
33.6
72.5
137
64F190*
1.17
1.41
1.79
2.50
4.25
10.9
29.9
67.0
128
M-191)
64F200
124
1)
64F235
1)
1.43
1.80
2.31
3.12
4.92
10.7
27.9
63.8
M-36
1.36
1.69
2.13
2.81
4.35
9.81
26.5
61.6
122
M-43
64F275
1.62
1.98
2.46
3.19
4.74
9.73
25.5
60.6
120
M-45
64F320
1.96
2.35
2.84
3.52
4.60
7.21
15.8
40.3
88.4
64F400*
19
Old
AISI
grade
36F135*
inch
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
0.0140
27.4
34.6
39.6
44.1
48.9
54.6
61.2
69.3
79.9
0.0140
29.7
37.9
43.4
48.6
54.2
60.7
68.4
78.0
90.7
M-19
1)
0.0140
33.3
42.1
47.8
53.2
59.0
66.0
73.9
83.7
96.3
36F175
M-27
1)
0.0140
32.9
42.6
48.0
53.1
58.5
64.8
72.4
81.3
92.8
36F185
M-361)
0.0140
34.6
43.7
49.6
55.1
60.9
67.4
75.1
84.5
96.5
47F145*
0.0185
32.7
42.0
48.5
54.7
60.1
66.3
75.5
86.9
102
47F155*
0.0185
33.7
43.3
50.0
56.3
61.9
68.0
77.2
88.3
103
36F145
36F155
M-15
47F165
M-151)
0.0185
34.4
44.2
50.9
57.3
62.6
68.7
77.6
88.1
103
47F180
M-221)
0.0185
35.6
45.3
51.7
57.6
63.8
70.6
78.5
88.0
99.8
47F190
M-27
0.0185
35.5
45.7
52.5
58.8
65.4
72.7
81.3
91.7
105
47F200
M-36
1)
0.0185
37.1
47.4
54.4
60.6
66.9
73.8
81.6
90.8
102
47F240
M-431)
0.0185
42.7
54.1
61.5
68.1
74.7
81.6
89.3
98.2
109
47F280
M-45
0.0185
51.9
66.5
75.1
82.6
89.9
97.6
106.3
116
128
47F340*
0.0185
67.2
84.2
93.9
102.5
109.1
116.9
125.6
134
145
64F190*
0.0250
26.3
36.3
44.0
51.1
58.2
65.5
73.4
82.2
93.1
64F200
M-191)
0.0250
27.1
37.8
46.2
53.6
60.5
67.5
74.9
82.9
89.9
64F235
M-36
1)
0.0250
30.9
40.5
48.0
55.1
62.5
70.3
79.1
89.9
105
64F275
M-43
1)
0.0250
32.6
42.5
49.8
56.7
63.8
71.2
79.3
88.6
100
64F320
M-45
0.0250
45.7
60.3
69.5
77.4
85.2
93.0
101.4
110
121
0.0250
58.8
76.0
86.8
96.6
106
115.3
125.7
136
148
64F400*
20
116
157
262
694
1960
4430
7660
12000
108
134
180
286
646
1820
4050
7320
11700
113
137
179
274
600
1710
3900
7190
11600
108
130
168
251
511
1440
3500
6710
113
137
179
267
522
1380
3410
120
145
186
278
585
1600
121
145
185
273
558
119
144
184
271
550
Grade
ASTM
A677
36F135*
M-15
36F145
1)
36F155
11300
1)
M-22
36F175
6620
11100
M-361)
36F185
3690
6900
11600
47F145*
1520
3570
6740
11400
47F155*
1500
3530
6710
11400
M-151)
47F165
1)
M-19
116
139
175
251
470
1230
3080
6160
10700
M-19
47F180
122
145
183
259
470
1190
3040
6130
10700
M-27
47F190
1)
119
141
178
250
455
1180
3020
6110
10700
M-36
47F200
125
146
181
251
443
1110
2900
6030
10600
M-431)
47F240
146
170
209
284
475
1100
2850
5990
10500
M-45
47F280
157
176
205
255
370
720
1840
4370
8340
47F340*
108
132
174
261
529
1410
3350
6500
11200
64F190*
100
121
155
230
441
1210
3020
6040
10600
M-191)
64F200
10300
1)
64F235
1)
125
154
196
277
484
1140
2820
5830
M-36
116
139
174
242
426
1060
2700
5670
10100
M-43
64F275
135
158
196
270
454
1040
2630
5620
10100
M-45
64F320
162
180
208
264
378
687
1630
3920
7760
64F400*
21
100 Hz
Core loss, W/lb at 100 Hz and peak magnetic polarization ^
J (T) of
Grade
ASTM A677
0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
36F135* 0.02 0.06 0.14 0.22 0.32 0.44 0.57 0.71 0.87 1.05
36F145
0.01 0.06 0.14 0.23 0.34 0.46 0.59 0.74 0.91 1.09
36F155
0.02 0.07 0.15 0.25 0.36 0.49 0.63 0.78 0.95 1.14
36F175
0.02 0.08 0.16 0.26 0.38 0.52 0.66 0.83 1.01 1.21
36F185
0.02 0.08 0.17 0.29 0.42 0.56 0.73 0.91 1.12 1.34
47F145*
47F155*
47F165
47F180
47F190
47F200
47F240
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.07
0.08
0.08
0.09
0.09
0.10
0.10
0.15
0.16
0.16
0.18
0.20
0.20
0.21
0.26
0.26
0.27
0.30
0.32
0.33
0.34
0.38
0.39
0.40
0.44
0.47
0.48
0.50
0.51
0.53
0.55
0.60
0.64
0.66
0.69
0.67
0.68
0.71
0.78
0.83
0.86
0.89
0.84
0.86
0.90
0.98
1.05
1.08
1.13
1.03
1.06
1.10
1.20
1.29
1.34
1.39
1.10
1.25
1.30
1.35
1.43
1.60
1.20
1.48
1.54
1.59
1.69
1.89
1.30
1.76
1.83
1.88
1.99
2.25
1.40
2.12
2.19
2.25
2.37
2.69
1.50
2.51
2.59
2.69
2.82
3.23
1.25
1.27
1.33
1.45
1.56
1.62
1.69
1.49
1.52
1.58
1.71
1.85
1.95
2.03
1.76
1.81
1.87
2.01
2.18
2.30
2.41
2.09
2.14
2.20
2.37
2.55
2.72
2.85
2.50
2.55
2.62
2.80
2.99
3.23
3.37
2.95
3.03
3.10
3.32
3.50
3.82
3.99
1.00
2.73
2.79
2.86
3.08
3.55
1.10
3.26
3.32
3.41
3.67
4.25
1.20
3.87
3.94
4.03
4.33
5.03
1.30
4.58
4.67
4.76
5.08
5.99
1.40
5.53
5.62
5.67
6.08
7.12
1.50
6.53
6.67
6.76
7.12
8.44
3.51
3.60
3.74
4.11
4.27
4.63
4.72
4.25
4.36
4.51
4.94
5.17
5.67
5.76
5.08
5.22
5.35
5.90
6.17
6.80
6.94
6.08
6.17
6.35
6.94
7.26
8.07
8.26
7.21
7.39
7.53
8.16
8.48
9.57
9.80
8.57
8.71
8.85
9.57
9.89
11.2
11.5
200 Hz
Core loss, W/lb at 200 Hz and peak magnetic polarization ^
J (T) of
Grade
ASTM A677
0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90
36F135*
0.04 0.15
0.33 0.55 0.81 1.11 1.45 1.83 2.25
36F145
0.04 0.15
0.33 0.56 0.83 1.13 1.48 1.87 2.30
36F155
0.04 0.17
0.36 0.59 0.87 1.18 1.54 1.93 2.37
36F175
0.04 0.18
0.39 0.64 0.93 1.27 1.66 2.09 2.56
36F185
0.05 0.20
0.42 0.70 1.04 1.43 1.87 2.37 2.93
47F145*
47F155*
47F165
47F180
47F190
47F200
47F240
0.05
0.05
0.05
0.05
0.06
0.06
0.07
0.19
0.20
0.20
0.23
0.22
0.24
0.25
0.40
0.41
0.42
0.47
0.48
0.51
0.53
0.67
0.68
0.70
0.78
0.81
0.85
0.88
0.98
1.02
1.05
1.16
1.20
1.27
1.30
1.36
1.40
1.46
1.61
1.66
1.76
1.79
1.79
1.85
1.92
2.12
2.19
2.33
2.37
2.29
2.35
2.45
2.70
2.80
3.00
3.04
2.86
2.93
3.06
3.37
3.49
3.76
3.81
22
400 Hz
Core loss, W/lb at 100 Hz and peak magnetic polarization ^
J (T) of
Grade
ASTM A677
0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00
36F135* 0.09 0.39 0.85 1.44 2.15 2.98 3.93 4.99 6.26 7.67
36F145
0.10 0.41 0.88 1.47 2.18 3.03 4.00 5.08 6.35 7.76
36F155
0.09 0.42 0.90 1.51 2.24 3.10 4.08 5.17 6.44 7.85
36F175
0.10 0.45 0.98 1.64 2.43 3.37 4.42 5.62 6.99 8.53
36F185
0.12 0.52 1.11 1.87 2.79 3.89 5.17 6.58 8.26 10.1
47F145*
47F155*
47F165
47F180
47F190
47F200
47F240
0.13
0.13
0.14
0.15
0.15
0.18
0.18
0.52
0.52
0.54
0.62
0.62
0.68
0.70
1.09
1.12
1.14
1.28
1.29
1.41
1.45
1.83
1.89
1.93
2.15
2.16
2.37
2.44
2.74
2.83
2.90
3.24
3.26
3.56
3.67
3.84
3.97
4.09
4.54
4.58
5.03
5.17
5.13
5.31
5.49
6.12
6.17
6.76
6.94
6.67
6.89
7.12
7.94
8.03
8.80
9.07
8.48
8.75
9.07
10.0
10.2
11.3
11.7
10.6
10.9
11.3
12.4
12.7
14.2
14.6
1.10
9.2
9.3
9.5
10.2
12.2
1.20
11.0
11.2
11.3
12.1
14.7
1.30
13.1
13.2
13.4
14.3
17.6
1.40
15.8
15.9
16.1
17.1
21.0
1.50
18.7
18.9
19.0
20.1
24.8
13.1
13.5
13.9
15.2
15.7
17.6
18.1
16.0
16.3
16.8
18.5
19.1
21.5
22.1
19.2
19.6
20.2
22.0
22.8
26.2
26.8
23.1
23.5
24.0
26.3
26.9
31.5
32.2
27.5
28.1
28.4
31.1
31.6
37.7
38.4
1000 Hz
Grade Core loss, W/lb at 1000 Hz and peak magnetic polarization ^
J (T) of
ASTM A677
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
36F135* 0.42
1.61
3.38
5.58
8.39
11.7
15.7
20.4
25.9
36F145
0.44
1.66
3.44
5.76
8.53
11.9
16.0
20.7
26.4
36F155
0.45
1.66
3.46
5.76
8.57
12.0
16.1
20.9
26.5
36F175
0.49
1.85
3.85
6.35
9.48
13.2
17.7
23.0
29.1
36F185
0.59
2.20
4.54
7.58
11.3
15.8
21.3
27.8
35.5
47F145*
47F155*
47F165
47F180
47F190
47F200
47F240
0.63
0.64
0.64
0.73
0.74
0.80
0.83
2.23
2.27
2.31
2.55
2.59
2.81
2.88
4.54
4.63
4.72
5.22
5.31
5.72
5.85
7.62
7.80
8.03
8.85
8.94
9.62
9.80
11.6
11.8
12.0
13.5
13.7
14.7
15.0
16.6
17.0
17.2
19.3
19.6
21.2
21.6
22.8
23.3
23.6
26.5
26.9
29.5
29.9
30.5
31.2
31.5
35.3
35.5
39.9
40.4
39.8
40.6
41.2
45.8
46.7
52.6
53.1
1.00
32.4
32.9
33.1
36.2
44.6
1.10
40.1
40.6
40.9
44.5
55.3
51.3
52.2
52.6
59.0
59.9
68.5
68.9
64.9
65.8
66.7
73.9
75.3
87.1
88.0
23
2500 Hz
Grade
Core loss, W/lb at 2500 Hz and peak magnetic polarization J (T) of
ASTM A677
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
36F135*
1.76
6.49
13.4
22.8
34.8
49.9
69.4
93.0
122
36F145
1.86
6.71
13.9
23.5
35.7
51.3
70.3
94.3
124
36F155
1.86
6.76
13.9
23.6
35.9
51.3
70.8
94.8
124
36F175
2.02
7.30
15.2
25.8
39.3
56.2
77.1
103
135
36F185
2.47
8.85
18.6
31.5
48.5
69.9
96.6
130
169
47F145*
47F155*
47F165
47F180
47F190
47F200
47F240
2.59
2.61
2.63
2.86
2.97
3.34
3.39
8.98
9.12
9.21
9.89
10.3
11.5
11.7
18.8
19.2
19.3
20.8
21.7
24.2
24.5
32.6
33.4
33.6
36.4
37.6
42.2
42.7
51.3
52.6
53.1
58.1
59.0
67.1
68.0
76.7
78.5
78.9
87.5
88.0
102
103
110
112
113
127
127
147
148
153
156
157
177
178
206
207
1.00
158
160
160
173
216
209
212
213
239
240
276
278
280
284
285
315
316
361
363
24
Grade
Thickness
NO 007
inch
0.007
NO 005
0.005
5.05
60.0
The information and data in this brochure are accurate to the best of Cogent's knowledge, but
are intended for general information only. Applications suggested for the materials are described
only to help the reader make his or her own evaluation and decision, and are neither guarantees
nor to be construed as expressed or implied warranties of suitability for these and other
applications. Cogent and its subsidiaries accept no liability in respect thereof.
25
20000
Slit width, mm
7,7 g/cm3
98 %
20 inch (508 mm)
1250 1100
10000
1000
900
800
700
600
500
5000
400
300
2000
200
Slit width, mm
1000
100
500
50
200
100
50
Conversion factors
1 inch = 25.4 mm
1 kg = 2.20 lbs
600
Wall height
50
800
150
1000
1200
1400
1600
250
350
450
550
1800
2000 mm
650
750 mm
26
cogent
tm
75
50
25
20
0
0
0,5
15
1,0
0,5
1,0
1,5
1,5
Global
10 Leader : Local Expert
Cogent Power Ltd has been a leading supplier to North American transformer
manufacturers for over thirty years. The focus and expertise continues to be standard
and speciality core components and electrical steels. Now with plants in Canada, USA
and Mexico, Cogent is the largest independent supplier in North America and in
conjunction with eight additional operations in Europe, Cogent forms the largest and
5
most diverse electrical
steel and components supplier in the world.
A strong focus on service, technical leadership and exceptional product quality has
made Cogent the exclusive supplier to many local and international transformer,
motor and electrical steel clients.
0
0
27
Product Information
This publication is part of a range of brochures that cover the following
products from Cogent, on electrical steel:
Grain Oriented electrical steels
Non-Oriented fully processed electrical steels
Non-Oriented semi-processed electrical steels
Thin Non-Oriented fully processed electrical steels
Magnetic Shielding
For all electrical steel enquiries please contact:
Cogent Power Inc. - USA
Cogent Power SA de CV
Connecticut 06610
USA
E: cores@cogent-power.com
W: cogentpowerinc.com
E: cores@cogent-power.com
W: cogentpowerinc.com
E: fct_electrical@corusgroup.com E: cores@cogent-power.com
W: corusnorthamerica.com
W: cogentpowerinc.com
www.cogent-power.com