PG Courses
PG Courses
Programmes
Doctor of Philosophy Master of Science (Research) Master of Technology Master of Design Master of Business Administration Master of Science
July 2005 : 1500 Copies Price : Rs. 50.00 Produced by Publication Cell for and behalf of IIT Delhi and Printed at Kaizen Offset Pvt. Ltd., Y-47 Okhla Industrial Area,Phase-II, New Delhi-20, Phones : 26384113 & 26384114.
CONTENTS
Postgraduate Programmes Offered by Various
(i)
Departments/Centres Rules, Regulations, Evaluation and Grading Requirements and Scheduling of Courses for M. Tech. Programmes Course Contents
Dept. of Applied Mechanics Dept. of Biochemical Engineering & Biotechnology Dept. of Chemical Engineering Dept. of Chemistry Dept. of Civil Engineering Dept. of Computer Science & Engineering Dept. of Electrical Engineering Dept. of Humanities & Social Sciences Dept. of Mathematics Dept. of Mechanical Engineering Dept. of Physics Dept. of Textile Technology Centre for Applied Research in Electronics National Resource Centre for Value Education in Engineering Centre for Atmospheric Sciences Centre for Biomedical Engineering Centre for Energy Studies Centre for Rural Development & Technology Industrial Tribology, Machine Dynamics & Maintenance Engineering Centre Instrument Design & Development Centre Centre for Polymer Science & Engineering 53 58 61 64 65 78 83 94 97 101 115 119 124 127 128 129 130 136 137 140 143 145 146 1 9
Interdisciplinary M.Tech. Programmes Interdisciplinary Master of Design (M.Des.) Programme Master of Science (M.Sc.) Programmes
Chemistry Mathematics Physics
M.B.A. Programmes
Dept. of Management Studies 162
AM Applied Mechanics
2 3 4 5
BE CH CY CE
6 7
CS EE
8 9 10 11
HU SM MA ME
12 PH 13 TT 14 15 16 17 18 CR AS BM ES IT
Physics Textile Technology Applied Research in Eletronics Atmospheric Sciences Biomedical Engineering Energy Studies Industrial Tribology, Machine Dynamics & Maintenance Engineering Instrument Design & Development Polymer Science & Engineering Rural Development & Technology Value Education in Engineering Amar Nath and Shashi Khosla School of Information Technology Bharti School of Telecommunication Technology and Management
19 20 21 22 23
ID PT RD VE SI
* * * *
24 BS
Ph. D. Ph. D. Ph. D. Ph. D. Ph. D. and M.S. (Research) Ph. D., M.Tech. and M.B.A.
(i)
Computer Applications Energy Studies Energy and Environmental Management (Evening) Industrial Tribology and Maintenance Engineering Instrument Technology Opto-Electronics & Optical Communication Polymer Science & Technology VLSI Design Tools & Technology Power Generation Technology (For NTPC Sponsored Engineers) Telecommunication Technology & Management
(ii)
1
PG 2ndProof 22.6.05
RULE The Grade Point Average (GPA) is calculated as follows : S (Number of Credits x Grade Point) GPA = S ( Number of Credits Registered) For the purpose of calculation of GPA for SGPA or CGPA, only those courses (including minors and major project) will be taken into account in which the student has been awarded one of A, B, C, D, E or F grade. E and F Grades These grades refer to unsatisfactory performance in a course. A student is required to repeat all compulsory courses (including Major Project-Part-I) except for Major Project- Part-II in which he/she obtains either an E or F grade. E and F grades obtained in any course will stay permanently on the Grade Card and they are included in the evaluation of SGPA. However, Fail grades (E&F) will not be counted for calculating the CGPA of all postgraduate students. I Grade This refers to an incomplete grade which is required to be converted into a regular grade later. Guidelines for the Award of I Grade (a) I grade may be awarded to a student if she/he has not fulfilled all the requirements for the course on account of extraordinary circumstances subject to having 50% attendance in tutorials and/or lab. classes as applicable. The concerned Course Coordinator should be convinced about the extraordinary circumstances and should certify the attendance record before this rarely used option to award I grade is recommended. (b) The I grades so awarded will be notified by the Department to which the student belongs and copy of the notification will be enclosed to Academic Section (Postgraduate Studies) and to the Course Coordinator concerned (e.g., the notification for I grade of a Civil Engineering student will be notified by the Civil Engineering Department on the recommendation of the concerned Course Coordinator, even if the course pertains to another department. (c) The I grade shall be converted into a proper grade and sent to Academic Section (Postgraduate Studies) within
10 days from the date on which all the major tests are over. (d) In special situations arising due to extraordinary circumstances the period of conversion of I grade may be extended to the first week of the next semester, with the approval of Dean, Postgraduate Studies & Research on the recommendation of the Course Coordinator, the Head of the Department to which the student belongs and the concerned Warden, for which the request has to be made sufficiently in advance. NP/NF Grades These grades are awarded to an audit course defined as one which a student may register for on pass (NP)/fail (NF) basis. These grades are not counted in the calculation of SGPA or CGPA. The courses in which a student has got `NP' grade will not count towards his/her valid credits required for completion of degree/ diploma. W grade This refers to withdrawal from a course other than Major Project which is allowed upto one week after the end of first Minor Test with prior permission of Course Coordinator. Notwithstanding the above, the Board of Postgraduate Studies & Research may permit a student to withdraw from all courses provided the Board of Postgraduate Studies & Research is convinced that the student could not pursue his studies for reasons beyond his control. Major Project An M.Tech. student shall register Major Project part-I of 6 credits. Fail Grades `E' & `F' are not to be counted for computing the CGPA. A student shall be eligible to register for the Major Project - Part-II only on satisfactory completion of the Major Project Part-I. X Grade This grade is provided for incomplete Major Project - Part-II work and will be converted to a regular grade on completion of the Project work and its evaluation. Guidelines for the Award of X Grade An M.Tech. student is required to submit a dissertation as a part of his/her Major Project - Part-II. A student who is unable to complete his/her major project may be awarded an X grade on recommendation by a Committee consisting of (i) Head of the Department/ Centre or his/her nominee; (ii) Nominee of the D.R.C./C.R.C.; and (iii) Supervisor(s) of
the project, and the student concerned may be required to present his/her work to the Evaluation Committee 6-8 weeks before the date of registration for the next semester. A student who has been awarded an X grade is required to formally register for the next semester and pay the fees. Also he will be normally required to vacate the hostel room. The following criteria will be used for the award of the X grade : (1) Number of times X grade to be awarded will be as under : For Full-time students : one For part-time students : two (2) Grounds for award of X Grade: X grade will be awarded in exceptional cases under the circumstances beyond students/supervisors control. However, the following are the grounds recognised for the award of X grade : (a) Medical grounds to the satisfaction of the Institute authorities. (b) Technical reasons/grounds such as supervisor/equipment not being available. (c) On long period assignment, on the written request of the employer of the student concerned. X grade on this ground will be awarded only once during the entire period of the study of the student. If the valid period of absence is more than half of the duration of a semester, the student will apply for withdrawal. (For Part-time students only) Semester Withdrawal Requests for permission to withdraw from all courses/semester will be considered as per the following guidelines : (a) Under no circumstances will a request for withdrawal be entertained after the major tests have begun. Students should present the medical certificate in support of their absence on health reasons within 2 days of joining. The students may not ask for withdrawal retrospectively. (b) Period of authorized absence in the semester should not be less than 8 weeks of contact period of withdrawal to be granted. (c) In case of request for withdrawal on medical grounds, students residing in the hostel must produce a certificate from the Institute hospital. The medical certificate issued by a registered medical practitioner will be acceptable in those cases where the student has
2
PG 2ndProof 22.6.05
valid reasons for his absence from the Institute hostel. (d) Regularity in attending the classes and satisfactory performance in the minor(s), if any held prior to the date of application for withdrawal, are factors which would be taken into account while recommending/granting withdrawal. Continuous Absence If a student whether, full time, sponsored or part time, is absent from the Institute for more than four weeks without notifying to the Head of Department/Centre or Dean, PGS&R, his/ her name will be removed from the Institute rolls. Qualifying Criteria M.Sc. Requirements The minimum credit requirements for the M.Sc. degree in Mathematics, Physics and Chemistry are 90 valid credits (D grade or above) inclusive of the minimum of 12 credits in departmental and 6 credits outside departmental elective courses. The Department may, however, require a student to register for more than 90 credits. Subject to revised structure a student is normally permitted to register for a minimum of 20 credits and a maximum of 28 credits per semester. Students can take electives in various areas during the last semester. The minimum Cumulative Grade Point Average (CGPA) required for the award of M.Sc. degree is 5.00. The minimum SGPA required for the continuation of registration is 4.00 at the end of first semester and CGPA of 4.50 at the end of 2nd and 3rd semester. In addition to CGPA requirment, the minimum valid credits required at the end of each semester is 75% of the credits registered in a semester. Every student must register and seriously attempt to complete all the requirements for the award of degree in two years. However, on the recommendation of the DRC, the Dean (PGS&R) may consider allowing a student to register in the 5th semester to complete any shortfall in his credit or CGPA requirement. The entire programme must, however, be completed within a maximum period of 3 years including any semester withdrawals. The M.Sc. degree is awarded by the Institute with the name of the subject (Chemistry, Mathematics or Physics) mentioned on it. Attendance They must attend 75% of the classes in each course for which they are registered. Requirement for the Postgraduate Diploma in Naval Construction The minimum credit requirement for D.I.I.T.
in Naval Construction is 49 valid credits (D grade or above). A student is normally permitted to register for a minimum of 12 credits and a maximum of 20 credits. The minimum CGPA required for the award of D.I.I.T. is 6.00. The minimum CGPA required for continuation of registration is 5.00 at the end of each semester. Every student must register and seriously attempt to complete all the requirements for the award of Diploma in 1 years. However, on recommendation of the DRC, the Dean (PGS&R) may consider allowing a student to register in the 4th semester to complete any shortfall in his credit or CGPA requirement. The entire programme must, however, be completed within a maximum period of 3 years including any semester withdrawals. M.Tech./M.S. (Research) Requirements The minimum credit requirement for the M.Tech. degree will be 60 valid credits (D grade or above) including a minimum of 42 credits of course work and 18 credits of project work. (Major project - part-I- 6 credits + major project- part-II 12 credits). Departments, may however, require a higher credit limit for the award of the degree. All M.Tech. students are expected to earn a minimum of 6 credits from courses outside their specialization. A full-time M.Tech. student will normally be allowed to register for a minimum of 12 credits and a maximum of 22 credits per semester with the condition that the No. of lecture courses to be not more than 6. A part-time M.Tech. student will be allowed to register for a maximum of 12 credits per semester with the condition that the No. of lecture courses to be not more than 3 and a minimum of one course or a Major and Minor Project in each semester. In the semester in which a part-time student registers for the Major Project - part-II, he may be allowed to register for any one additional course along with the Project even though the total number of credits registered exceeds 12. He/she is expected to complete M.Tech. degree requirements in 6 semesters. The minimum credit requirements for M.S. (Research) Programmes is 60 credits 20 of course work normally to be completed during first two semesters of admission and research work of 40 credits spread over three semesters. The minimum CGPA required for the award of M.Tech./M.S. (Research) degree is 6.00/ 7.00 respectively. For continuation of registration, a minimum SGPA of 5.50 at the end of Ist Semester and
CGPA of 5.50 and valid credits to the extent of 75% of the registered credits (except Major Project - part-II) at the end of subsequent semester is required. The full-time/part-time student of M.S. (R) Programme must score a minimum CGPA of 7.0 in course work for continuation of registration. If a student gets a CGPA between 5.50 and 6.00 at the end of his M.Tech. Programme and has earned at least 45, valid credits, he may be considered, on request, for award of a Diploma (D.I.I.T.) even though the department/centre does not run a regular Diploma programme. Likewise, if a student gets a CGPA of 6.00 or more but has not earned 60 valid credits at the end of his M.Tech. programme, he/she may be considered for the award of D.I.I.T. only provided that he/she has earned at least 45 valid credits. The request for the award of D.I.I.T. must be made within 5 years of the date of joining the programme. Every full-time student must register and seriously attempt to complete all the requirements for the award of degree in 4 semesters. However, on the recommendation of the DRC, the Dean (PGS&R) may consider allowing a student to register in the subsequent semesters to complete any shortfall in his credit or CGPA requirement. The entire programme must however, be completed within a maximum period of 6 semesters including any semester withdrawals. Likewise for part-time students, the normal duration for completing the programme is 6 semesters, extendable as above, up to a maximum of 10 semesters. All part-time M.Tech. students must register and complete the required course credits and thesis project in not more than 6 semesters except in cases where semester withdrawal is allowed or X grade is awarded in Major ProjectPart-II. However, if a part-time student is able to complete the required course credits and thesis project in 6 semesters, he may be conferred the degree of M.Tech., after completion of 6 semesters only. Further, if a part-time M.Tech. student, due to certain circumstances beyond his/her control is not able to complete degree in 6 semesters, he/she may be allowed to register in the subsequent semester by Dean, PGS&R on the recommendations of the DRC/CRC/ PEC. The request for registration beyond the 6th semester will state the circumstances in which the student failed to complete the requirements. DRC/CRC/ PEC will record its observations on the request of the student. Each case will be decided by the Dean, PGS&R on merit. The maximum period for which a part-time
3
PG 2ndProof 22.6.05
M.Tech. student may be permitted to register should be 10 semesters. M.Des. Requirements Presently, only one M.Des. programme in Industrial Design is being run at the Institute. This is a 2-year (4 semesters) programme. The CGPA and credit requirements for the programme are given below. Besides, there will be a departmental elective in the 3rd semester Elective/Indepth study. The course allows plenty of opportunity for the students creativity and individuality to flower through studio practice, minor and major projects. The programme emphasises on a learning by creative doing. Great importance is attached to interaction with design educationists and design practitioners. Field visits to product development houses and design firms is an essential part of the programme. Every student must register and seriously attempt to complete all the requirements for the Degree in 4 semesters. However, on the recommendations of the DRC, the Dean (PGS&R) may consider allowing a student to register in the subsequent semesters to complete any shortfall in his/ her credit or CGPA requirement. The entire programme must, however, be completed within a maximum period of 6 semesters. The M.Sc./M.Tech./M.S. (Research)/ M.Des./D.I.I.T. degree or the diploma as the case may be is awarded by the Institute with the name of the programme mentioned on it. Grant of Leave and Attendance Requirements for M.Tech./M.S. (Research)/M.Des./D.I.I.T. Students Leave A full-time M.Tech./M.S.(Research)/ M.Des./D.I.I.T. student during his/her stay at the Institute will be entitled to leave for 30 days (including leave on medical grounds), per academic year. He/she will not be entitled to mid-semester breaks, summer and winter vacations. He/she, however, may be permitted to avail of leave only up to 15 days during winter vacation at the end of the first semester. The leave will be subject to approval of the Head of Department/Centre/Programme Coordinator concerned and a proper leave account of each student shall be maintained by the Department/Centre/ Programme Coordinator concerned. An M.Tech. student may be allowed to avail a maximum of 9 days extra leave without Assistantship during his entire stay at the Institute, while an M.Des. student may avail 12 days in the similar manner.
Attendance Requirement for Assistantship An M.Tech./M.S.(Research)/M.Des./D.I.I.T. student irrespective of the source of Assistantship, must attend at least 75% of classes in each course in which he/she is registered. In case his/her attendance falls below 75% in any course during a month, he/she will not be paid Assistantship for that month. Further, if his/her attendance again falls short of 75% in any course in any subsequent month in that semester his/her studentship and Assistantship will be terminated. For the above purpose, if 75% works out to be a number which is not a whole number, the immediate lower whole number will be treated as the required 75% attendance. M.B.A. Programmes The objective of the M.B.A. programmes is to impart management education in an engineering environment so as to enable the student to be optimally equipped to respond to the changing requirements of the industry in the Indian ethos. The full-time MBA programme is focused on Management Systems and "Telecommunication Systems Management". The programme can be completed in minimum two years and can go up to a maximum of three years. The minimum credit requirement for the M.B.A. degree will be 72 valid credits + 6 compulsory audit courses. The minimum CGPA required for the award of MBA degree is 6.00. Operating Procedures The operating prodecures with reference to credit system, credits and evaluation, audit course requirement, grading system, semester withdrawal, continuing absence, and academic performance criteria for continuation of registration, etc. will be the same as applicable to other M. Tech. programmes of the Institute. Ph.D. The award of Ph.D. degree is in recognition of high achievements, independent research and application of scientific knowledge to the solution of technical and scientific problems. Creative and productive enquiry is the basic concept underlying the research work. In order to overcome any deficiency in the breadth of fundamental training or proper foundation for advanced work, special preliminary or pre-doctoral courses are given by each department/centre. These courses are given either by faculty members or by guest-speakers and specialists in the profession. Candidates having a B.Tech./ M.Sc./M.A. or equivalent degree are required
to complete a minimum of 12 credits. Relaxation upto 6 credits in the course work can be considered for those with M.Phil. degree. M.Tech. or equivalent degree holders are required to complete a minimum of 6 credits. The departments/centres may require a larger number of credits in a particular case. The course requirement will be determined by the Department/Centres Research Committee (DRC/CRC) on the recommendations of the supervisor after due consideration of the background of the student in relation to the proposed topic of research. These courses can be prescribed from existing M.Tech. courses, special prePh.D. courses including laboratory, seminar, foreign language etc. No independent study course will be allowed for Ph.D. students. The minimum CGPA requirement is 7.50. If the SGPA at the end of Ist Semester is above 7.00 but less than 7.50, he/she will be asked to take more courses in order to make up the required CGPA. If the SGPA at the end of the first semester and CGPA at the end of any subsequent semester is below 7.00, he/ she will have to discontinue the doctoral programme. In some departments, the required performance level may be higher than that stated above. The admitted students must acquire copy of departmental norms. The course work must be completed within the first two semesters of joining the programme. In addition to the requirement of prescribed minimum CGPA, he/she shall be required to secure valid credits to the extent of 75% of the credits registered in a semester for continuation of registration. A student shall be formally registered/ admitted to the candidacy of Ph. D. degree only after he/she has cleared the comprehensive examination. Students would be permitted to take comprehensive examination only after they have submitted a research plan and have completed the course work (including compulsory Audit Course - HUL 810 Communication skill). Full-time and part-time students must clear the comprehensive examination within a period of 18 months and 24 months respectively, from the date of joining. A maximum of 2 chances will be given to any student to clear the comprehensive examination. Every student, after having completed the comprehensive examination must formally register for the candidacy on a form obtainable from the PG Section. Time Limit for Ph.D. Work (a) Candidates having a B.Tech./M.A./ M.Sc. or equivalent degree are required to be registered for a period of not less than 3 years from the commencement of registration (date of registration). In exceptional cases the minimum period of registration may be reduced to two
4
PG 2ndProof 22.6.05
years with the approval of the Senate. The minimum period of registration for candidates having an M.Tech. or equivalent degree is two years. (b) A candidate is normally expected to submit his thesis within five years from the date of registration. This period may be extended by BPGS as a special case to a maximum of seven years after which the registration will stand cancelled. (c) A full-time candidate may be allowed by Dean, PGS&R, to convert his/her registration into part-time registration only after completion of at least three years from initial registration or after submission of synopsis. (d) Full-Time Ph.D. scholars with M.Tech. qualification can be permitted to convert their registration from full-time to parttime after one year or after completion of course work and comprehensive examination whichever is later, if they get employed in the Institutes sponsored projects. e) Full-time Ph.D. scholars in the Science Departments with M.Sc. qualifications can be permitted to convert their registration from full-time to part-time after two years or after completion of course work and comprehensive examination, whichever is later, if they get employed in the Institutes sponsored projects. Such conversion will be permissible only if the work is in the Projects of the Institute and not for employment outside. This provision will also be applicable to the Ph.D. scholars having B.Tech. Degree.
The leave may be subject to the approval of the Head of Department/Centre/Programme. Coordinator concerned on the recommendation of the Supervisor; and a proper leave account of each scholar shall be maintained by the Department/Centre/ Programme Coordinator concerned. (b) After Completing the Course Work : A full-time Ph.D. student during his/her stay at the Institute, will be entitled to leave for 30 days per academic year. He/she will not be entitled to midsemester breaks, summer and winter vacations. In addition, a Ph.D. scholar who has completed his/her course work may be granted leave on medical grounds up to 10 days per academic year. The woman research scholars will be eligible for Maternity Leave with Assistantship for a period not exceeding 135 days once during the tenure of their award. Attendance Requirements for Assistantship A Ph.D. student irrespective of the source of research Assistantship while pursuing course work, must attend at least 75% of classes in each course in which he/she is registered. In case his/her attendance falls below 75% in any course during a month, he/she will not be paid Assistantship for that month. Further, if his/her attendance again falls short of 75% in any course in any subsequent month in that semester, his/her studentship and Assistantship will be terminated. A research scholar after having completed the course work must attend to his/her research work on all the working days and mark attendance except when he/ she is on duly sanctioned leave. The requirement of 75% attendance will apply as above, on daily attendance except in the cases where longer leave has been duly sanctioned within the leave entitlement of the student. For the above purpose, if 75% works out to be a number which is not a whole number, the immediate lower whole number will be treated as the required 75% attendance. Further Regulations Governing Ph.D. Students The Ph.D. degree of the Institute may be conferred on a candidate who fulfills all the requirements detailed in the ordinances and other rules, approved by the Senate. Some of the important regulations are given below: 1. Applications for Ph.D. registration, i.e., for entry to a course of study and research leading to Ph.D. degree must be made to BPGS on the approved form. The date of registration is normally the date of joining the programme. However, in exceptional
cases the date of registration may be preponed by a maximum of 6 months by BPGS if it is convinced that the candidate has spent adequate amount of time on research earlier. 2. The academic programme of all the Ph.D. candidates in a department/centre will be coordinated by the DRC/CRC appointed by BPGS&R. 3. The supervisor shall be a full-time member of the academic staff of the Institute. The supervisor(s) shall be appointed within three months of joining the programme. If necessary, the Board of Postgraduate Studies & Research on the recommendations of the Supervisor through the DRC/CRC, may appoint Joint Supervisor(s) not exceeding two from inside or outside the Institute. Normally, there should not be more than two supervisors for a candidate from within the Institute. Appointment of any Joint Supervisor would not be permitted after a lapse of eighteen months from the date of registration of the candidate, except in case when none of the supervisors is in the Institute for a year or more at a stretch. 4. The DRC/CRC shall meet from time to time and review the progress of each candidate in course work, as well as research, by any means, including oral examination of the candidate, if necessary, and recommend, after due consultation with the supervisor(s), such steps to the candidate as are necessary to improve his performance. 5. The progress of each candidate will be monitored by DRC/CRC. For this purpose the following procedures will be followed : (a) Ph.D research work will be compulsorily given a course number, DTD 899 (Doctoral Thesis) for all candidates across the Institute. The DRC/CRC Secretary/Ph.D. Coordinator will be Coordinating collection of progress reports written and signed by the scholars and forwarded by the supervisors every semester. The supervisor(s)/SRC/DRC/CRC will evaluate the progress of the student every semester. X grade will be awarded during that semester if the progress is satisfactory. If the progress is unsatisfactory, U grade will be awarded. For the first appearance of U grade, a warning would be issued to the candidate by Dean, PGS & R. If his performance does not improve after warning, the fellowship may be withheld.
Grant of Leave and Attendance Requirements for Ph.D. Students Leave (a) During Course Work : A full-time Ph.D. student, during his/her stay at the Institute will be entitled to leave for 30 days, including leave on medical grounds, per academic year. He/she will not be entitled to mid-semester breaks, summer and winter vacations. He/she, however, may be permitted to avail of leave only up to 15 days during winter vacation at the end of the first semester. Leave beyond 30 days in an academic year may be granted to a Research Scholar in exceptional cases subject to the following conditions : (i) (ii) the leave beyond 30 days will be without Assistantship/Scholarship and such an extension of upto additional 30 days will be granted only once during the programme of the scholar.
(b)
(c)
(d)
(e)
5
PG 2ndProof 22.6.05
If there are two consecutive Us, the registration will stand terminated. Submission of progress report should continue till submission of thesis. Like all other courses, the grades for DTD 899 will be discussed in the Department/Centre as per semester schedule. The above process will continue till the thesis is submitted.
(a) that the thesis be deemed satisfactory and that the candidate may defend his thesis orally before a committee constituted for the purpose and any members of the faculty and research students who wish to be present. (b) that the candidate may submit a revised thesis after the expiry of a specific period. In the normal circumstances, he may submit the revised thesis within a period of one year from the date of communication in this regard from the Dean, PGS&R. However, in exceptional circumstances, this period may be extended by the BPGS&R by another one year : the total revision time irrespective of the number of revisions allowed will not exceed a period of two years. (c) that the thesis be rejected outright. In the event of disagreement between the external examiners, the BPGS may, as a special case, appoint another external examiner, if the merit of the case so demands. The examiner will report independently to the BPGS. 10. The oral defence of the thesis shall be conducted by a committee consisting of the internal examiner(s) and one external examiner. If none of the external examiners, is available for the conduct of the oral defence, an alternative external examiner shall be appointed by the BPGS for this purpose only. 11. On the completion of all stages of the examination, the Oral Defence Committee shall recommend to the BPGS one of the following courses of action : (a) that the degree be awarded. (b) that the candidate should be examined on a further occasion in a manner they shall prescribe. (c) that the degree shall not be awarded. In case (a), the Oral Defence Committee shall also provide to the candidate a list of all corrections and modifications, if any, suggested by the examiners. 12. The degree shall be awarded by the Senate, provided that : (a) the Oral Defence Committee, through the BPGS so recommends. (b) the candidate produces a no dues certificate from all concerned in the prescribed form and gets it forwarded along with the report of the Oral Defence Committee;and (c) the candidate has submitted two hard cover copies of the thesis, from amongst
the same ones submitted by him earlier, after incorporating all necessary corrections and modifications including appropriate IPR notice. The hard bound copies of the Ph. D. thesis, submitted after the viva-voce examination, must contain the appropriate copyright certificate in the beginning of the thesis, on a separate page on the left side. One of these copies is for the Department/Centres Library and the other is for the Central Library. 13. The relevant IPR notice to be incorporated in the soft/hard bound thesis, reports etc. shall be chosen from the following: a) the thesis/report etc. for which formal copyright application has NOT been filed should carry the copyright notice as: Indian Institute of Technology Delhi (IITD), New Delhi , 200 ...[the year of submission of the thesis/ report]. b) and for which formal copyright application has been filed with the copyright office. Should carry the copyright notice as: Indian Institute of Technology Delhi (IITD), New Delhi , 200 ...[the year of submission of the thesis/ report]. All right reserved. Copyright Registration Pending. c) and for which in-addition to a formal copyright application with the Copyright Office, patent/design application has also been filed with the patent office, should carry the IPR Notice as: Intellectual Property Right (IPRs) notice Part of this thesis may be protected by one or more of Indian Copyright Registrations (Pending) and/or Indian Patent/ Design (Pending) by Dean, Industrial Research & Development (IRD) Unit Indian Institute of Technology Delhi (IITD) New Delhi110016, India. IITD restricts the use, in any form, of the information, in part or full, contained in this thesis ONLY on written permission of the Competent Authority: Dean, IRD, IIT Delhi OR MD, FITT, IIT Delhi. The notices at b and c should ONLY be, repeat ONLY be inserted after the formal application(s) has (have) been filed with the appropriate office(s) as the case may be and the same has been confirmed by FITT office. 14. If a member of the academic staff, who is registered for the degree, leaves the Institute before the minimum period of
6. The candidate may submit his thesis at any time provided that : (a) He/she has completed the minimum period of registration including any extension prescribed by the Board of Postgraduate Studies & Research. (b) He/she has completed the course work requirement as prescribed by the DRC/ CRC with GPA not below 7.50 and has also cleared the comprehensive examination. (c) He/she has submitted at least two months previously, the title and a synopsis of the thesis. 7. The thesis shall normally be written in English in the specific format and shall contain a critical account of the candidates research. It should be characterized by discovery of facts of fresh approach towards interpretation of facts and theories or significant contribution to knowledge of design or develop-ment, or a combination of them. It should bear evidence of the candidates capacity for analysis and judgement and also his ability to carry out independent investigation, design or development. A thesis may be supplemented by published work, if necessary. No part of the thesis or supplementary published work, shall have been submitted for the award of any other degree/Diploma. Normally, three copies of thesis in soft cover have to be submitted in the format prescribed by the Institute. In case of joint supervision, four copies of the thesis are required to be submitted. 8. On receipt of the title and synopsis of a thesis the Dean, PGS&R will appoint a Board of Examiners of each candidate. The Board will consist of one (or two) internal examiner(s), normally the supervisor(s), and two external examiners, one from within India and one from abroad who shall be expert in the subject of thesis. These external examiners shall be chosen from a list of 6 to 8, to be recommended by the supervisor(s) through the DRC/CRC while forwarding the title and synopsis of the thesis. The candidate will be required to submit a fresh synopsis if more than 9 months have passed before submission of the thesis. 9. Each Examiner will submit a detailed assessment report recommending to the BPGS, one of the following courses of action :
6
PG 2ndProof 22.6.05
registration is completed, he will be permitted to submit his thesis in due course, provided that : (a) a substantial part of the research has been completed at the Institute; and (b) any additional work required can be adequately supervised.
15. A member of the academic staff who has commenced his research before joining the Institute may, at the discretion of the BPGS and on the recommendation of the Supervisor through the DRC concerned, be permitted to include in his period of registration, part or all of the time spent on research before joining the
Institute, up to a maximum of one year. 16. A member of the non-academic staff of the Institute who satisfies eligibility qualifications may be considered for admission to the degree as a part-time candidate provided his/her application is duly approved by the Director of the Institute.
7
PG 2ndProof 22.6.05
AML 7 0 5
Level of Course
Typically, courses whose three numerals are between 500 and 899 are taken by postgraduate students; detailed course descriptions of all these courses are given in this booklet. Course Category Letter symbols for course categories are: PC : Programme Core Code AM AS BE BM CH CY CE CR CS EE ES HU ID IT SM MA ME PH PT RD TT VE SI BS PE : Programme Elective OE : Open Elective
Name of Department or Centre Department of Applied Mechanics. Centre for Atmospheric Sciences. Department of Biochemical Engineering & Biotechnology. Centre for Biomedical Engineering. Department of Chemical Engineering. Department of Chemistry. Department of Civil Engineering. Centre for Applied Research in Electronics. Department of Computer Science & Engineering. Department of Electrical Engineering. Centre for Energy Studies. Department of Humanities and Social Sciences. Centre for Instrument Design and Development. Centre for Industrial Tribology, Machine Dynamics and Maintenance Engineering. Department of Management Studies. Department of Mathematics. Department of Mechanical Engineering. Department of Physics. Centre for Polymer Science and Technology. Centre for Rural Development & Technology. Department of Textile Technology. National Resource Centre for Value Education in Engineering. Amar Nath and Shashi Khosla School of Information Technology. Bharti School of Telecommunication Technology and Management.
(Note : A course code starting with "J" indicates Interdisciplinary Programme Code.) Contact Hours and Credits The number of credits and contact hours per week are given after the course number and title: AML 705 Finite Element Methods : 4 credits (3-0-2) 4 credit course 3 h Lectures 0 h Tutorial Per week 2 h Practical
8
PG 2ndProof 22.6.05
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 45 Scheduling of Courses Semester I S.No. 1. 2. 3. 4. 5. 6. Course No. AML771 AMP772 AML773 AML775 AMP776 AML710 Decision Theory & Design Optimization Feasibility Study Modelling & Analysis - 1 Design Methods Products Design - 1 Computer Aided Design Total Credits Semester II 1. 2. 3. 4. 5. 6. AML774 AMP777 AML 883 Modelling & Analysis - II Products Design Project - II Programme Elective I Programme Elective II Open Elective I Total Credits Semester III 1. 2. 3. AMD813 Programe Elective III Open Elective II Major Project Part 1 Total Credits Semester IV 1. AMD814 Major Project Total Credits List of program Electives S.No. Course No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. AML700 AML734 AML835 AML852 AML871 AML873 CEL717 DIL713 DIP741 EEL781 EEL801 MEL731 MEL749 AMS802 Title Experimental Methods for Solids & Fluids Advanced Dynamics Mechanics of Composite Materials Part 2 Program Elective (PE) 9
Design Engineering
Total Credits 60
Title PC PC PC PC PC PC
Type
L-T-P
Credits 3 3 3 3 3 4 19
PC PC PE PE OE
3 2 3 3 3 3 17
PE OE PC
3 3 6 12
PC
0-0-24
12 12
L-T-P 3-0-2 3-1-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 1-0-4 3-0-0 3-0-0 3-0-2 3-0-2 0-3-0
Credits 4 4 3 3 3 3 3 3 3 3 3 4 4 3
Engineering Failure Analysis & Prevention Product Reliability & Maintenance Design for Production Advanced Structural Analysis Design for Sustainable Development Product form & Aesthetics Neural Networks Micro-Processor based Design Design of Mechanism & Manipulators Mechatronic product Design Independent Study
10
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 40 Scheduling of Courses Semester I S.No. 1. 2. 3. 4. 5. 6. Course No. CHL701 CHL724 CHL723
Total Credits 60
1. 2. 3. 4. 5. 6. 7.
1. 2. 3. 4.
CHD770
1.
CHD780
Process Engineering Environmental Engineering and Waste Management Chemical Reaction & Reactor Engineering Programme Elective I Programme Elective II Open Elective I Total Credits Semester II Plant Design Design of Separation Process Minor Project Programme Elective III Programme Elective IV Programme Elective V Open Elective II Total Credits Semester III Major Project Part 1 Programme Elective VI Programme Elective VII Open Elective III Total Credits Semester IV Major Project Part 2 Total Credits
Title PC PC PC PE PE OE
Credits 4 4 3 3 3 0 17-21 4 4 3
PC PC PC PE PE PE OE
17-21 PC PE PE OE 0-0-12 6 4
12-14 PC 0-0-24 12 12
List of Program Electives Course No. Title 1. CHL626 Multiphase Contactors 2. CHL653 Application of Programming in Chemical Engineering 3. CHL705 Electrokinetic Transport in Chemical Engineering 4. CHL813 Thermodynamics and process design 5. CHL717 Mechanical design of process equipment 6. CHL794* Petroleum Refinery Engineering 7. CHL604 Fluid Solid Reaction Engineering 8. CHL710 Process Dynamics and Control 9. CHL751 Multicomponent Mass Transfer 10. CHP711* Process Development Lab 11. CHL714 Advanced Heat Transfer 12. CHL761* Chemical Engineering Mathematics 13. CHS780 Independent Study * Course details may be had from the Programme Coordinator.
L-T-P 3-0-0 3-0-2 3-0-2 2-0-2 3-0-2 3-0-2 3-0-2 3-1-2 3-0-0 0-0-6 3-0-0 3-0-0 0-3-0
Credits 3 4 4 3 4 4 4 5 3 3 3 3 3
11
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Semester I S.No. 1. 2. 3. 4. Course No. CYL701 CYL703 Electro-analytical Chemistry Spectrochemical Methods Program Elective - I Program Elective - II Semester II 1. 2. 3. 4. 5. 6. CYL702 CYL704 CYD799 Chemical Seperations Chemical Computations Minor Project Programme Elective III Open Elective I Open Elective II Semester III 1. 2. 3. 4. CYD801 CYP803 CYC805 Glass Blowing Seminar Programme Elective IV Major Project Part 1 Program Elective (PE) 12
Total Credits 60
Title PC PC PE PE
Type
L-T-P
Credits 5 5 3 3 16 5 3 3 3 3 3 20 1 2 3 6 12 12 12
PC PC PC PE OE OE
PC PC PE PC Semester IV
1.
CYD802
PC
0-0-24
List of program Electives S.No. Course No. 1. 2. 2. 3. 4. 5. 6. 7. 8. 9. 11. CYL705 CYL707 CYL711 CYL712 CYL713 CYL714 CYL715 CYL716 CYL717 CYL718 CYS800 Title Environmental Analytical Chemistry Electronics and Chemical Instrumentation X-ray and Electron Microscopic Methods Characterization of Surfaces Characterization of Polymers NMR and Mass Spectrometric Methods Bio-analytical chemistry Data Analysis, Experimental Design and Chemometrics Principles of Chemical and Bio sensors On Line Methods of Chemical Analysis Independent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 3
12
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 45 Scheduling of Courses Program Elective (PE) 9
Total Credits 60
Semester I S.No. 1. 2. 3. 4. 5. 6. Course No. CEL701 CEL703 CEL705 CEP701 Engineering Behaviour of Soils Site Investigations and Ground Improvement Geoenvironmental Engineering Soil Engineering Laboratory Programme Elective - I Open Elective - I Total Credits Semester II 1. 2. 3. 4. 5. CEL704 CEL702 CEL708 CEL706 CEP702 Or CED701 Shallow and Deep Foundations Slope Stability and Earth Dams Earth Pressures and Retaining Structures Geosynthetics Geoenvironmental & Geotechnical Engineering Laboratory Minor Project (Only for PT students) Programme Elective-II Total Credits Semester III 1. 2. 3. CED811 Programme Elective - III Open Elective II Major Project Part 1 Total Credits Semester IV 1. CED812 Major Project Part 2 Total Credits List of Program Electives Course No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. * + CEL760 CEL709 CEL707 CEL714 CEL712 CEL715 CEL614 CEL610 CEL612 CES840 Title Finite Element Method in Geotechnical Engineering Offshore Geotechnical Engineering Soil Dynamics and Geotechnical Earthquake Engineering Special Topics in Geotechnical and Geoenvironmental Engineering Landfills and Ash Ponds Soil Structure Interaction Analysis Geoenvironmental and Geohazard Engineering* Foundation Engineering* Construction Methods in Geotechnical Engineering+ Independent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 PC 0-0-24 12 12 PE OE PC 3-0-0 3-0-0 0-0-12 3 3 6 12 PC PC PC PC PC PC PE 3-0-0 3-0-0 3-0-0 3-0-0 0-0-6 0-0-6 3-0-0 3 3 3 3 3 3 3 21 Title PC PC PC PC PE OE Type L-T-P Credits 3 3 3 3 3 3 18 3-0-0 3-0-0 3-0-0 0-0-6 3-0-0 3-0-0
6.
for other specializations only for Construction Technology and Management Programme only.
13
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 45 Scheduling of Courses Program Elective (PE) 9
Total Credits 60
Semester I S.No. Course No. 1. CEL751 2. 3. 4. 5. 6. CEL753 CEL757 CEP751 CEL754 Title Engineering Properties of Rocks and Rock Masses Structural Geology Field Exploration and Insitu Measurements Rock Mech. Lab - 1 Geotech Processes in Rock Engineering Programme Elective - 1 Total Credits Semester II Slopes and Foundations Analysis and Design of Underground Structures Excavation Methods and Machinery Rock Lab - II (OR) Minor Project (Only for PT students Open Elective- I Programme Elective-II Total Credits Semester III Major Project, Part 1 Open Elective - II Programme Elective - III Total Credits Semester IV Major Project, Part 2 Total Credits Type PC PC PC PC PC PC L-T-P 3-0-0 2-0-2 3-0-0 0-0-6 3-0-0 3-0-0 Credits 3 3 3 3 3 3 16 3 3 3 3 3 3 18 6 3 3 12 12 12
1. 2. 3. 4. 5. 6.
PC PC PC PC OE PE
1. 2. 3.
CED851
PC OE PE
1.
CED852
PC
0-0-24
List of Program Electives S.No. Course No. 1. CEL760 2. CEL761 3. CEL762 4. CEL763 5. CEL801 6. CEL651 7. CES850 Title Finite Element Method in Geotechnical Engineering Underground Space Technology Special Topics in Rock Engineering Environmental Rock Engineering Advanced Rock Mechanics Rock Engineering* Indepenent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 3
14
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Semester I S.No. Course No. 1. CEL717 2. CEL719 3. CEL721 4. CEL733 5. 6. Course Title Advanced Structural Analysis Structural Dynamics Design of Concrete Structures Finite Element Methods in Structural Engg. Programme Elective I Open Elective I Total Credits Semester II Design of Steel Structures Solid Mechanics in Structural Engineering Earthquake Analysis and Design Structural Engineering Lab. Programme Elective II Open Elective II Total Credits Semester III Programme Elective III Programme Elective IV Major Project Part 1 Total Credits Semester IV Major Project, Part 2 Total Credits Program Elective (PE) 12
Structural Engineering
Total Credits 60
Type PC PC PC PC PE OE
Credits 3 3 3 3 3 3 18 3 3 3 3 3 3 18 3 3 6 12 12 12
1. 2. 3. 4. 5. 6.
PC PC PC PC PE OE
1. 2. 3.
CED821
PE PE PC
1.
CED822
PC
0-0-24
List of Program Electives S.No. Course No. 1. CEL727 2. CEL729 3. CEL731 4. CEL734 5. CEL817 6. CEL819 7. CEL771 8. CEL818 9. CEL832 10. CEL824 11. CEL826 12. CEL828 13. CES822 14. CES820 Title Design of Industrial Structures Advanced Design of Bridges Prestressed/Composit Structures Mathematical and Numerical Methods Structural Safety and Reliability Concrete Machanics Civil Engineering Materials Design of Plates and Shells Design of Tall Buildings Design of Offshore Structures Advanced FEM and Programming Wind Resistant Design of Structures Stability Theory in Structural Engineering Independent Study L-T-P 2-1-0 2-1-0 3-0-0 2-1-0 3-0-0 3-0-0 3-0-0 2-1-0 2-1-0 2-1-0 2-0-2 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 3 3 3 3
15
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 40 Scheduling of Courses Semester I S.No. Course No. 1. CEL735 2. CEL737 3. CEL739 4. CEP740 5. CEL741 6. 7. Program Elective (PE) 15
Total Credits 61
Title Hydrologic Processes & Modeling Optimization Techniques in Water Resources Groundwater Hydrology Simulation Laboratory I Surface Water Quality Modeling & Control Programme Elective - I Programme Elective - II Semester II
Type PC PC PC PC PC PE PE
L-T-P 3-0-0 3-0-0 3-0-0 1-0-6 3-0-0 3-0-0 3-0-0 Total 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 Total 0-0-12 3-0-0 3-0-0 Total 0-0-24
Credits 3 3 3 4 3 3 3 19 3 3 3 3 3 3 18 6 3 3 12 12 12
1. 2. 3. 4. 5. 6.
CEL738 CEL742
1. 2. 3.
CED841
1.
CED842
Advanced Hydraulics Finite Element in Water Resources Program Elective-III Program Elective-IV Program Elective-V Open Elective-I Total Credits Semester III Major Project Part 1 Programme Elective - VI Open Elective - II Total Credits Semester IV Major Project Part 2 Total Credits
PC PC PE PE PE OE
PC PE OE
PC
List of Program Electives S.No. Course No. 1. CEL736 2. CEL743 3. CEL744 4. CEL745 5. CEL746 6. CEL747 7. CEL748 8. CEL749 9. CEL840 10. CEP724 11. CES840 Title Environmental Dynamics & Management Economic Aspects of Water Resources Development Groundwater Flow and Pollution Modelling Water Management Hydroelectric Engineering Geographical Information System (GIS) Hydrologic Applications of Remote Sensing Technology Water Resources Systems Stochastic Hydrology Water Resources Management Lab. Independent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 2-0-2 2-0-2 3-0-0 3-0-0 1-0-4 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 3
16
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Program Elective (PE) 12
Total Credits 60
Semester I S.No. Course No. 1. CEL769 2. CEL772 3. 4. 5. 6. CEL771 CEL774 Title Project Planning and Control Quantitative Methods in Construction Management Civil Engineering Materials Construction Engineering Practices Programme Elective - (I) Open Elective - (I) Total Credits Semester II Construction Methods and Equipments Construction & Contract Management Construction Economics & Finance Construction Engineering and Information Technology Lab Programme Elective (II) Programme Elective (III) Total Credits Semester III Programme Elective (IV) Open Elective - (II) Major Project - I Total Credits Semester IV Major Project - II Total Credits List of Program Electives S.No. Course No. 1. CEL766 2. CEL768 3. CEL773 4. CEL776 5. 6. CEL777 CES870 Title Systems Design and Value Analysis Recent Advances in Construction Materials Management of Quality and Safety in Construction Functional Planning, Building Services and Maintenance Management Building Science Independent Study L-T-P 3-0-0 3-0-0 2-1-0 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 Type PC PC PC PC PE OE L-T-P 2-1-0 2-1-0 3-0-0 3-0-0 3-0-0 3-0-0 Credits 3 3 3 3 3 3 18 3 3 3 3 3 3 18 3 3 6 12 12 12
1. 2. 3. 4. 5. 6.
PC PC PC PC PE PE
1. 2. 3.
CED871
PE OE PC
1.
CED872
PC
0-0-24
17
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Program Elective (PE) 09
Total Credits 60
Semester I S.No. Course No. 1. CEL773 2. 3. 4. 5. 6. CEL769 CEL774* ITL709** EEL*** CEL772 Title Management of Quality and Safety in Construction Project Planning and Control Construction Engineering Practices Maintenance Planning & Control Power System Protection Programme Elective (I) from respective discipline Quantitative Methods in Construction Management Open Elective (I) Total Credits Semester II Construction Methods and Equipments Construction & Contract Management Computational Laboratory for Construction Management Construction Economics & Finance Programme Elective (II) from respective discipline Open Elective (II) Total Credits Semester III Programme Elective (III) from respective discipline Open Elective (III) Major Project Part 1 Total Credits Semester IV Major Project Part 2 Total Credits * For Civil Engg. background students. **For Mechanical Engg. background students. *** For Electrical Engg. background students Type PC PC PC PE PC OE L-T-P 2-1-0 2-1-0 3-0-0 3-0-0 3-0-0 3-0-0 2-1-0 3-0-0 Credits 3 3 3 3 3 3 3 3 18 3 3 3 3 3 3 18 3 3 6 12 12 12
1. 2. 3. 4. 5. 6.
PC PC PC PC PE OE
1. 2. 3.
PE OE PE
CED875
1.
CED876
PC
0-0-24
18
List of Programme Electives for Construction Technology & Management Civil Engineering Courses S.No. Course No. 1. CEL766 2. CEL768 3. CEL771 4. CEL776 5. 6. 7. CEL777 CEL612 CES874 Course Title Systems Design and Value Analysis Recent Advances in Construction Materials Civil Engineering Materials Functional Planning, Building Services and Maintence Management Building Science Construction Methods in Geotechnical Engineering Independent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 3
Mechanical Engineering Courses S.No. Course No. 1. ITL752 2. MEL661 3. MEL674 4. MEL710 5. MEL711 6. MEL752 7. MEL754 8. MEL778 9. MEL787 10. MEL808 11. MEL866 Course Title Bulk Solids Handling Materials Management Principles of Management Air Conditioning Refrigeration & Air-conditioning Technology Quality Assurance Operations Planning and Control Design & Metallurgy of Welded Joints Welding and Allied Processes Refrigeration Systems & Component Design Maintenance Management L-T-P 2-1-0 2-0-2 3-0-0 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 2-0-4 3-0-0 Credits 3 3 3 4 4 4 4 4 4 4 3
Electrical Engineering Courses S.No. Course No. 1. EEL743 2. EEL744 3. EEL745 4. EEL746 5. EEL747 6. EEL790 7. EEL791 8. EEL794 9. EEL841 10. EEL845 11. EEL891 12. EEL899 13. EEP841 14. EEP842 15. EEP843 Course Title Power Electronics Devices and DC Converters AC Controllers Electrical Drives System Non-conventional Energy Systems & Energy Conservation Electrical Systems for Construction Industries Power System Control and Instrumentation Power System Analysis High Voltage DC Transmission Solid State Control of Drives Special Electromechanical Devices Selected Topics in Power Systems Distribution Automation Electrical Machines Laboratory Power Electronics Laboratory Electric Drives Laboratory L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-2 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-0-3 0-0-3 0-0-3 Credits 3 3 3 3 4 3 3 3 3 3 3 3 1.5 1.5 1.5
19
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Semester-wise Schedule Program Elective (PE) 12
Total Credits 60
Semester I S.No. Course No. 1. CEP789 2. CEL795 3. CEL793 4. CEL886 5. 6. Title Environmental Chemistry and Microbiology Water and Wastewater Treatment Processes Air Pollution and Control Environmental Systems Analysis Programme Elective - I Open Elective - I* Total Credits Semester II Advance Wastewater Treatment Advance Environmental Engineering Laboratory Solid and Hazardous Waste Management Programme Elective (One/Two) Programme Elective II Programme Elective III Open Elective - II* Total Credits Semester III Programme Elective (One/Two) Programme Elective IV Programme Elective V Open Elective -III* Major Project Part 1 Total Credits Semester IV Major Project Part 2 Total Credits Type PC PC PC PC PE OE L-T-P 1-0-4 3-0-0 3-0-2 3-0-2 3-0-0 Credits 3 3 4 4 3 3 17-20 3 4 3 3 3 3 16-19
1. 2. 3. 4. 5. 6.
PC PC PC PE PE OE
1. 2. 3. 4.
CED891
PE PE OE PC
3 3 3 6 12-15 12 12
1.
CED892
PC
0-0-24
List of Program Electives S.No. Course No. Title 1. CEL797 Environmental Impact Assessment 2. CEL879 Industrial Waste Management and Audit 3. CEL889 Emerging Technologies for Environmental Management 4. CEL891 Thermal Techniques for Waste Treatment 5. CEL892 Air Quality Modelling 6. CEL894 Management of Water, Waste and Sanitation Utilities 7. CEL895 Ecology and Eco System Dynamics 8. CEL896 Design of Water and Wastewater Facilities 9. CEL897 Membrance Processes for Water and Waste Treatment 10. CEL898 Life Cycle Analysis and Design for Environment 11. CEL899 Environmental Risk Assessment 12. CES890 Independent Study * any two out of 3 OEs.
L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0
Credits 3 3 3 3 3 3 3 3 3 3 3 3
20
Name of the Programme Distribution of Total Credits Program Core (PC) 41 Program Elective (PE) 12
Transportation Engineering
Total Credits 62
Semester-wise Distribution of Credits: Semester I Semester II 19 19 Table 1: Scheduling of Courses S.No. Course No. I-1. CEL772 I-2. I-3. I-4. I-5. I-6. CEL781 CEL782 CEL783
Semester III 12
Semester IV 12
Total Credits 62
CED881
IV-1.
CED 882
Semester I Course Title Quantitaive Methods in Construction Management Urban and Regional Transportation Planning Pavement Materials and Construction Techniques Traffic Engineering Programme Elective-I (PE-I) Open Elective - I* Total Credits Semester II Design and Maintenance of Pavements Advanced Transportation Modelling Geometric Design of Streets and Highways Programme Elective-II (PE-II) Programme Elective-III (PE-III) Open Elective - II* Total Credits Semester III Programme Elective-IV (PE-IV) Open Elective-III Major Project Part 1 Total Credits Semester IV Major Project Part 2 Total Credits
Type PC PC PC PC PE OE PC PC PC PE PE OE
PE OE PC
0-0-12
PC
0-0-24
21
Table 2: Elective Courses A List of Programme Electives for M.Tech. Transportation Engineering S.No. Course No. 1. CEL787 2. 3. 4. 5. 6. 7. 8. CEL788 CEL789 CEL843 CEL844 CEL845 CEL729 CES880 Title Transportation Safety and Environment Public Transportation Systems Transportation Systems Management Traffic Engineering & Simulation Transportation Economics and Finance Transportation and Traffic Infrastructure Design Advanced Design of Bridges Independent Study L-T-P 3-0-0 3-0-0 3-0-0 2-0-2 3-0-0 3-0-0 2-1-0 0-3-0 Credits 3 3 3 3 3 3 3 3 Group PE-I & PE-IV PE-I & PE-IV PE-I & PE-IV PE-II & PE-III PE-II & PE-III PE-II & PE-III PE-I & PE-IV Prerequisite None CEL 781 or# None CEL 783 or CEL 786 None CEL 786 or# CEL 786 or#
# Consent of Instructor
22
Name of the M.Tech. Programme Distribution of Total Credits Minimum limits given for elective categories Program Core (PC) 40 Scheduling of Courses S.No. Course No. 1. CSL665 2. CSL630 3. CSP601 4. 5. Program Elective (PE) 14
Total Credits 60
1. 2. 3. 4. 5.
1. 2. 3.
CSD893
1.
CSD894
Semester I Course Title Introduction to Logic and Functional Programming Date Structures and Algorithms Sofware Systems Laboratory Programme Elective - 1 Open Elective - 1 Total Credits Semester II Advanced Algorithms Architecture of High Performance Computer Systems Minor Project Programme Elective-2 Open Elective-2 Total Credits Semester III Programme Elective-3 Programme Elective-4 Major Project Part 1 Total Credits Semester IV Major Project Part 2 Total Credits
Type PC PC PC PE OE
Credits 4 4 3 4 3 18 3 4 4 4 3 18 3 3 6 12 12 12
PC PC PC PE OE
PE PE PC
PC
0-0-24
Notes : The schedule as presented is only indicative of how a typical student may register for courses, but allows considerable flexibility to the student of choice of when to register for programme and open electives. Select students who wish to conduct their project work outside Delhi, e.g. those in special academic exchange programmes, may, on approval, swap the Minor project with an OE/PE course usually taken in Semester III, and may also register for an additional OE/PE course in the Semester II. The Minor Project and Independent Study courses may be taken in the summer in these special cases. 600 level courses are not available to undergraduate and dual degree students. 600 level programme elective courses may be taken by students only an approval of M.Tech coordinator, since these are courses typically in undergraduate curricula, which are made available to PG students who have taken equivalent courses earlier.
23
List of Program Electives Courses for M.Tech. Progromme in Computer Science and Engineering S.No. Course No. 1. CSL632 2. CSL633 3. CSL671 4. CSL672 5. CSL719 6. 7. CSL740 8. CSL750 9. CSL755 10. CSL771 11. CSL781 12. CSL783 13. CSS799 14. CSL812 15. CSL821 16. CSL830 17. CSL831 18. CSL832 19. CSL840 20. CSL847 21. CSL851 22. CSL852 23. CSL853 24. CSL854 25. CSL855 26. CSL856 27. CSL858 28. CSL859 29. CSL860 30. CSL861 31. CSL862 32. CSL863 33. CSL864 34. CSL865 35. CSL866 36. CSL867 37. CSL868 38. CSL869 39. CSV880 40. CSV881 41. CSV882 42. CSV883 43. CSV884 44. CSV885 45. CSV886 46. CSV887 47. CSV888 48. CSV889 Title Introduction To Database System Resource Management in Computer Systems Artifical Intelligence Computer Networks Synthesis of Digital Systems CSL728Compiler Design Software Engineering Foundations of Automatic Verification Mathematics Foundations of Computer Science Database Implementation Computer Graphics Digital Image Analysis Independent Study System Level Design and Modelling Reconfigurable Computing Distributed Computing Semantics of Programming Languages Proof and Types Computer Vision Distributed Algorithms Algorithmic Graph Theory Computational Geometry Complexity Theory Approximation Algorithms Mathematical Foundations of Computing Mathematical Programming Advanced Computer Networks Advanced Computer Graphics Special Topics in Parallel Computation Special Topics in Hardware Systems Special Topics in Software Systems Special Topics in Theoretical Computer Science Special Topics in Artificial Intelligence Special Topics in Computer Applications Special Topics in Algorithms Special Topics in High Speed Networks Special Topics in Database Systems Special Topics in Concurrency Special Module in Parallel Computation Special Module in Hardware Systems Special Module in Software Systems Special Module in Theoretical Computer Science Special Module in Artificial Intelligence Special Module in Computer Applications Special Module in Algorithms Special Module in High Speed Networks Special Module in Database Systems Special Module in Concurrency L-T-P 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-3 3-0-2 3-0-2 3-0-0 3-0-2 3-0-3 3-0-3 0-3-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-2 3-0-0 3-0-0 3-0-2 3-0-0 3-0-0 3-0-0 3-0-2 3-0-2 3-0-2 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 1-0-0 1-0-0 1-0-0 1-0-0 1-0-0 1-0-0 1-0-0 1-0-0 1-0-0 1-0-0 Credits 4 4 4 4 4 4.5 4 4 3 4 4.5 4.5 3 3 3 3 3 3 4 3 3 4 3 3 3 4 4 4 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1
24
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 40 Scheduling of Courses S.No. Course No. 1. EEL711 2. EEL713 3. EEP717 4. EEP719 5. EEL762 6. EEL731 7. Semester I Title Signal Theory Microwave theory and circuits Communication lab. - I Communication lab. - II Digital communications Digital signal processing Programme Elective - I Total Credits Semester II Minor project Detection and estimation Programme Elective-II Programme Elective-III Open Elective-I Open Elective-II Total Credits Semester III Major Project Part 1 Programme Elective-IV Open Elective Total Credits Semester IV Major Project Part 2 Total Credits Program Elective (PE) 12
Type PC PC PC PC PC PC PE
Credits 3 3 2 2 3 3 3 19 3 3 3 3 3 3 18 6 3 3 12 12 12 Credits 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 3 3 3 3 3 3 3 3 3
1. 2. 3. 4. 5. 6.
EED860 EEL768
PC PC PE PE OE OE
1. 2. 3.
EED861
PC PE OE
1.
EED862
PC
0-0-24
List of Program Electives S.No. Course No. Title 1. EEL703 Computer networks 2. EEL710 Coding theory 3. EEL718 Statistical signal processing 4. EEL760 Antenna theory & techniques 5. EEL766 Numerical techniques in electromagnetics 6. EEL812 Millimetre wave integrated circuits 7. EEL716 Telecommunication Switching & Transmission 8. EEL763 Monolithic microwave integrated circuits & technology 9. EEL861 Selected topics in communication engg.-I 10. EEL862 Selected topics in communication engg.-II 11. EEL863 Selected topics in communication engg.-III 12. EEL864 Modern antennas and arrays 13. EEL865 Microwave propagation & systems 14. EEL866 Microwave solid state devices & circuits 15. EEL867 Fading channels 16. EEL715 Image processing 17. EEL869 Optical data processing 18. EES810 Independent study 19. CRL705 Advanced sensor array signal processing 20. CRL707 Human and machine speech communication 21. CRL712 RF and microwave active circuits 22. CRL715 Radiating systems for RF communications 23. CRL722 RF and microwave solid state devices 24. CRL723 Fabrication lab for RF and microwave devices 25. CRL725 Technology for RF and microwave solid state devices
L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-2 3-0-0 0-3-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 1-0-4 3-0-0
25
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 40 Scheduling of Courses Semester I S.No. Course No. 1. EEP701 2. EEL601 3. EEL702 4. 5. Title Digital system lab Computer architecture System software Open elective-I Programme elective-II Total Semester II 1. 2. 3. 4. 5. 6. 7. EEP702 EEL602 EEL703 EEP703 EED701 Software lab Operating systems Computer networks Computer networks lab Minor project Programme, Elective-II Programme, Elective-III Total Semester III 1. 2. 3. 4. EED801 Major Project Part 1 Programme Elective-4 Programme Elective-5* Open Elective 2 Total Semester IV 1. EED802 Major Project Part 2 Total Credits Program Elective (PE) 14
Computer Technology
Total Credits 60
Type PC PC PC OC PE
Credits 2 3 4 3 3 Or 4 15 to16 2 4 3 2 2 3 Or 4 3 Or 4 19 to 21 6 3 3 Or 4 3 12 to 16 12 12
PC PC PC PC PC PE PE
PC PE PE OE
PC
0-0-24
* PE-5 will be required if a student does not take three PE's of 4 credits; List of Program Electives S.No. No. Title 1. EEL832 Computer aided VLSI design 2. EEL851 Special Topics in Computers I 3. EEL852 Special Topics in Computers II 4. EEL802 Testing & fault tolerance 5. EEL758 Intelligent and Knowledge Based System 6. EEL707 Multimedia systems 7. EEL706 Computer vision 8. EEL715 Image processing 9. EEL754 Computer graphics 10. EEL704 Robotics and Automation 11. EEL708 Information retrieval 12. EEL857 Network security 13. EEL705 Embedded systems & applications 14. EEL859 Network management 15. EEL804 Scientific visualization 16. EEL709 Pattern recognition 17. EEL854 Protocol engineering 18. EEL853 Agent technologies 19. EEL855 Internet technologies 20. EEL858 Mobile computing 21. EEL731 Digital signal processing 22. CSL719 Synthesis of Digital system 23. CSL812 System Level Design and Modelling 24. EES800 Independent study
L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-2 3-0-2 3-0-2 3-0-2 3-0-0 3-0-0 3-0-2 3-0-0 3-0-2 3-0-0 3-0-0 3-0-2 3-0-0 3-0-2 3-0-0 3-0-0 3-0-2 3-0-0 0-3-0
Credits 3 3 3 3 3 4 4 4 4 3 3 4 3 4 3 3 4 3 4 3 3 4 3 3
26
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 40 Scheduling of Courses Semester I S.No. Course No. 1. EEL721 2. EEL771 3. EEP725 4. 5. 6. Program Elective (PE) 12
Total Credits 61
1. 2. 3. 4. 5. 6.
1. 2. 3.
EED875
1.
EED876
Title Linear system theory Random process in control and estimation Control laboratory Programme elective-I Programme elective-II Open elective-I Total Credits Semester II Optimal control theory Parameter estimation and system identification Project laboratory Robotics and automation Programme elective-III Open elective-II Total Credits Semester III Programme Elective IV Major Project Part I Open Elective III Total Credits Semester IV Major Project Part 2 Total Credits
Type PC PC PC PE PE OE
Credits 3 3 3 3 3 3 18 3 3 4 3 3 3 19 3 6 3 12 12 12
PC PC PC PC PE OE
PE PC OE
PC
0-0-24
List of Program Electives S.No. Course No. Title 1. EED820 Minor project 2. EEL723 Microprocessor based industrial control 3. EEL796 Power system control and instrumentation 4. EEL823 Discrete time systems 5. EEL824 Nonlinear systems 6. EEL829 Selected topics in advanced control & system theory-I 7. EEL879 Selected topics in advanced control & system-II 8. EEL758 Intelligent & Knowledge based systems 9. EEL745 Electrical drives system 10. IDL711 Instrumentation transducers 11. EEL731 Digital signal processing 12. EEL602 Operating systems 13. EEL878 Artificial intelligence for control applications 14. MEL783 Automation in manufacturing 15. CHL710 Chemical dynamics and control 16. EEP701 Digital system laboratory 17. EEL705 Embedded systems & applications 18. EES720 Independent study
L-T-P 0-0-6 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-2 3-0-0 3-0-2 3-0-0 0-0-4 3-0-0 0-3-0
Credits 3 3 3 3 3 3 3 3 3 3 3 4 3 4 3 2 3 3
27
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Semester I S.No. Course No. 1. EEL732 2. EEL734 3. EEP735 4. *** 5. *** Title Micro electronics MOS VLSI IEC laboratory-I Elective-I Elective-II Total Credits Semester II Digital signal processing Analog Integrated IC technology IEC laboratory-II Computer aided VLSI design Elective-III Total Credits IC Precessing lab Total Credits Semester III Major Project Part 1 Elective-IV Elective-V Independent study/minor project Total Credits Semester IV Major Project, Part 2 Elective VII Total Credits Program Elective (PE) 12
Total Credits 60
Type PC PC PC OE OE
1. 2. 3. 4. 5. 6.
Sumar
PC PC PC PC PC PE PE
EEP788
1. 2. 3. 4.
EED888
PC PE OE PE
1.
EED889
PC PE
0-0-24 3-0-0
* The course will be registered for in the 3rd semester and will be run in the summer between the second and the third semester. This is a PC for M.Tech. VDTT and is available as PE for M.Tech in IEC. ** Normally the load in the first semester will be 15 credits. However in specific cases the course advisor may recommend 18 credits with elective V shifted from semester III to semester I *** If EED 788 is registered for, then elective VII need not be registered for in semester IV and the total credits will be only 12. List of Program Electives S.No. Course No. 1. EEL781 2. EEL783 3. EEL786 4. EEL787 5. EEP788 6. EEL802 7. EED830 8. EEL831 9. EEL833 10. EEL834 11. EEP835 12. EEL836 13. EEL881 14. EES837 Title Neural networks Filter Design Mixed signal circuit design Memory design and testing IC processing laboratory* Testing and fault tolerance Minor project Digital signal processing-II Selected topics in IEC VLSI design Project laboratory Biomedical electronics Issues in deep submicron CMOS IC design Independent study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 0-0-6 3-0-0 0-0-6 3-0-0 3-0-0 3-0-0 0-0-6 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 3 3 3 3
28
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Program Elective (PE) 12
Total Credits 60
Semester I S.No. Course No. 1. EEL741 2. EEL742 3. 4. 5. 6. 7. EEL743 EEL744 EEP841 EEP842 Title Modelling & Analysis of Electrical Machines Physical Phenomenon And Design Concepts in Machines Power Electronic Devices & D.C. Converters A.C. Controllers Electrical Machines Laboratory Power Electronics Laboratory Programme Elective - I Total Credits Semester II Electrical Drive System Electric Drives Labratory Microprocessors and DSP Laboratory Solid-State Controllers of Drives Programme Elective-II Programme Elective-III Open Elective-I Total Credits Semester III Major Project Part 1 Programme Elective-IV Open Elective-II Total Credits Semester IV Major Project Part 2 Total Credits Type PC PC PC PC PC PC PE L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 0-0-3 0-0-3 3-0-0 Credits 3 3 3 3 1.5 1.5 3 18 3 1.5 1.5 3 3 3 3 18 6 3 3 12 12 12
1. 2. 3. 4. 5. 6. 7.
PC PC PC PC PE PE OE
1. 2. 3.
EED842
PC PE OE
1.
EED843
PC
0-0-24
List of Program Electives S.No. Course No. Course Title 1. EEL723 Microprocessor Based Industrial control 2. EED841 Minor Project 3. EEL846 Computer Aided Design of Electrical Machines 4. EEL845 Special Electromechanical Devices 5. EEL705 Embedded System and Applications 6. EEL842 Power Conditioning 7. EEL844 Advanced or Selected Topics in power Electronics 8. EEL847 Selected Topics in Machines & Drives 9. EEL843 Computer Aided Simulation and Design of power Electronic Systems 10. EET841 Industrial Training and Seminar 11. EEL746 Nonconventional Energy Systems and Energy Conservation 12. EES841 Independent Study
L-T-P 3-0-0 0-0-6 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-0-6 3-0-0 0-3-0
Credits 3 3 3 3 3 3 3 3 3 3 3 3
29
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 40 Scheduling of Courses Semester I S.No. Course No. 1. EEL791 2. EEL792 3. EEP791 4. 5. 6. Title Power system analysis Power system protection Power system lab-I Programme elective-II Programme elective-II Open elective-I Total Credits Semester II Power system control and instrumentation Power system dynamics Power system lab-II Minor project Programme elective-III Flexible AC transmission system Open elective-II Total Credits Semester III Major Project Part 1 Programme elective-IV Open elective III Total Credits Semester IV Major Project Part 2 Total Credits Program Elective (PE) 12
Power Systems
Total Credits 61
Type PC PC PC PE PE OE
Credits 3 3 2 3 3 3 17 3 3 2 3 3 3 3 20 6 3 3 12 12 12
1. 2. 3. 4. 5. 6. 7.
PC PC PC PC PE PC OE
1. 2. 3.
EED890
PC PE OE
1.
EED898
PC
0-0-24
List of Program Electives S.No. Course No. Title 1. EEL799 Power system reliability 2. EEL793 Power system transients 3. EEL794 High voltage DC transmission 4. EEL897 Load forecasting and load management 5. EEL892 Power system communication 6. EEL896 Power system optimization 7. EEL891 Selected topics in power system 8. EEL885 EHV AC transmission 9. EEL899 Distribution automation 10. EES893 Independent study
L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0
Credits 3 3 3 3 3 3 3 3 3 3
30
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses S.No. 1. 2. 3. 4. Course No. MEL731 MEL733 MEL737 MEL735 Program Elective (PE) 12
Total Credits 60
Semester I Title Design of Mechanisms and manipulators Vibration Engineering Advanced Mechanical Engineering Design Computer Methods in Mechanical Design Semester II Instrumentation and Automatic Control Systems Optimum Design of Mechanical Systems Design Technology Elective Equipment Design Elective Open Elective* Semester III
L-T-P 3-0-2 3-0-2 3-0-2 3-0-2 16 3-0-2 3-0-2 3-0-2 3-0-2 3/4-0-0 19/20 0-0-12 3-0-2
Credits 4 4 4 4
1. 2. 3. 4. 5.
4 4 4 4 3 or 4
1. 2. 3. 4.
6 4 3 3 or 0
16 or 13 0-0-24 12 12
: Design Technology Elective Course No. Title MEL832 Multibody Systems & Vibration Design MEL744 Design for Manufacture and Assembly MEL746 Design for Noise Vibration and Harshness MEL748 Tribological Systems Design MEL749 Mechatronic Prouduts Design MEL844 Designing with new Materials : Equipment Design Elective MEL732 Machine tool Design MEL736 Automotive Design MEL743 Plant Equipment Design : Specialized Electives MEL734 Noise Engineering MEL738 Dynamics of Multibody Systems MEL739 Robotics. MEL741 Blade & Disc Dynamics MEL842 Advanced Concurrent Engineering MEL831 Advanced Theory of Vibrations MEL835 Special Topics MEL836 Advanced Lubrication MEL837 Advanced Mechanisms MEL838 Rotor Dynamics MEL839 Precision Engineering MEL840 Experimental Modal Analysis & Dynamic Design MEL841 Advanced Structural Dynamics MES830 Independent Study
L-T-P 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 0-4-0
Credits 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
31
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Semester I S.No. 1. 2. 3. 4. 5. 6. Course No. MEL751 MEL761 MEL765 Title Industrial Engineering and Systems Statistics for Decision Making Operations Research I Programme Elective - 1 Programme Elective - 2 Total Credits Semester II Quality Assurance Operations Planning and Control Supply Chain Management Programme Elective - 3 Open Elective - 1 Total Credits Semester III Programme Elective - 4 Open Elective - 2 Major Project Part 1 Total Credits Semester IV Major Project Part 2 Program Elective (PE) 12
Type PC PC PC PE PE
Credits 4 4 4 3 3 18 4 4 4 3 3 18 3 3 6 12 12
1. 2. 3. 4. 5.
PC PC PC PE OE
1. 2. 3.
MED861
PE OE PC
0-0-12
1.
PC
0-0-24 12 L-T-P 2-0-2 3-0-0 2-0-2 3-0-0 2-0-2 2-0-2 2-0-2 2-0-2 2-0-2 3-0-0 3-0-2 2-0-2 3-0-2 2-0-2 3-0-0 2-0-2 2-0-2 2-0-2 3-0-0 3-0-0 3-0-0 2-1-0 3-0-0 2-0-0 2-1-0 0-3-0
List of Program Electives S.No. Course No. Course Title 1. MEL661 Materials Management 2. MEL667 Long Range Planning 3. MEL671 Value Engineering 4. MEL674 Principles of Management 5. MEL760 Project Management 6. MEL762 Facilities Planning and Plant Engineering 7. MEL763 Methods Engineering & Ergonomics 8. MEL764 Human Factors Engineering 9. MEL768 Quality Management: A Systems Perspective 10. MEL775 IT in Manufacturing Enterprises 11. MEL783 Automation in Manufacturing 12. MEL786 Metrology 13. MEL794 CAD/CAM 14. MEL850 Network Models and Applications 15. MEL851 Industrial Engineering Challenges in E-Business 16. MEL852 Computer Integrated Manufacturing Systems 17. MEL861 Industrial Applications of Simulation 18. MEL865 Systems Dynamics : Modeling and Industrial Applications 19. MEL866 Maintenance Management 20. MEL868 Operations Research II 21. MEL870 Knowledge Management 22. MEL871 Financial Engineering 23. MEL875 Operations Research III 24. MEV760 Special Topics in Industrial Engineering 25. VEL700 Human Values and Technology 26. MES860 Independent Study
Credits 3 3 3 3 3 3 3 3 3 3 4 3 4 3 3 3 3 3 3 3 3 3 3 2 3 3
32
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 45 Scheduling of Courses Semester I Title Metal Forming Analysis Machining Processes & Analysis Welding & Allied Processes Composite Meterials & Processing Open Elective -1 Total Credits Semester II 1. MEL780 Casting Technology 2. MEL784 CNC Technology & Programming 3. MEL786 Metrology 4. Program Elective - 1 5. Program Elective - 2 Total Credits Semester III 1. Program Elective - 3 2. Program Elective - 4 3. Open Elective-2 4. MED881 Major Project Part 1 Total Credits Semester IV 1. MED882 Major Project Part 2 Total Credits *LTP 3-0-0 or 3-0-4 or 2-0-2 S.No. Course No. 1. MEL769 2. MEL781 3. MEL787 4. MEL791 5. List of Program Electives S.No. Course No. 1. MEL674 2. MEL732 3. MEL749 4. MEL752 5. MEL754 6. MEL763 7. MEL772 8. MEL775 9. MEL778 10. MEL783 11. MEL792 12. MEL794 13. MEP790 14. MES880 Course Title Principles of Management Machine Tool Design Mechatronic Product Design Quality Assurance Operations Planning and Control Methods Engineering & Ergonomics Metal Forming Technology IT in Manufacturing Enterprises Design and Metallurgy of Welded Joints Automation in Manufacturing Injection Molding and Mold Design CAD/CAM Process Engineering Independent Study Program Elective (PE) 11
Production Engineering
Total Credits 62
Type PC PC PC PC OE
PC PC PC PE PE
PE PE OE PC
PC
0-0-24
L-T-P 3-0-0 3-0-2 3-0-2 3-0-2 3-0-2 2-0-2 3-0-0 3-0-0 3-0-2 3-0-2 2-0-2 3-0-2 2-0-4 0-3-0
Credits 3 4 4 4 4 3 3 3 4 4 3 4 4 3
33
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 40 Scheduling of Courses Semester I Seme-. ster 1. 2. 3. 4. 5. Course No. MEL703 AML715 MEL705 MEL707 Course Title
Thermal Engineering
Total Credits 60
Type PC PC PC PC OE/PE
1. 2. 3. 4. 5. 6.
1. 2. 3.
MED811
1.
MED812
Advanced Thermodynamics Viscous Fluid Flows Experimental Methods in Thermal Engineering Applied Mathematics for Mechanical Engineers Open Elective/Program Elective - 1 Total Semester II Convection Heat and Mass Transfer Radiation and Conduction Heat Transfer Thermal Systems Simulation & Design Program Elective - 1 Program Elective - 2 Program Elective-/Open Elective Total Credits Semester III Programme Elective-3 Open Elective/Programme Elective- 4 Major Project Part 1 Total Semester IV Major Project Part 2 Total Credits
PC PC PC PE PE PE/OE
2-0-4
PE OE PC
0-0-12
PC
0-0-24
List of Program Electives S.No. Course No. Course Title 1 MEL708 Combustion Generated Pollution and Control 2. MEL709 Heat Exchangers 3. MEL710 Air-conditioning 4. MEL711 Refrigeration and Air-conditioning Technologies 5. MEL712 Advanced Power Plant Cycles 6. MEL713 Design of IC Engine Components & Subsystems 7. MEL714 Thermal and Nuclear Steam Power Plants 8. MEL715 Gas Dynamics 9. MED700 Design Project 10. MEL807 Computational Heat Transfer 11. MEL808 Refrigeration Systems and Components Design 12. MEL809 Heat Transfer Applications 13. MEL811 Steam and Gas Turbines 14. MEL812 Combustion 15. MEL814 Turbocompressors 16. MEL815 Applied Combustion 17. MEL816 Analysis of I.C. Engine Processes 18. MEL818 Multiphase Flows 19. MEL801 Fire Dynamics and Engineering 20. MED710 Mini-Project 21. MEP601 Introduction to Computers and Programming 22. MEC601 Mechanical Engineering Seminars 23. MES810 Independent Study
L-T-P 3-0-2 3-0-2 3-0-2 3-0-2 2-0-4 3-0-2 3-0-2 3-0-2 0-1-6 2-0-4 2-0-4 1-0-4 3-0-2 3-0-2 3-0-2 2-0-4 3-0-2 2-0-4 2-0-4 0-3-0 0-0-4 0-1-0 0-3-0
34
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 45 Scheduling of Courses S.No. Course No. 1. PHL751 2. PHL753 3. PHP761 4. PHP763 5. 6. Total 1. 2. 3. 4. 5. 6. PHL752 PHL754 PHL756 PHL758 PHP762 Semester I Course Title Optical Sources, Detectors and Photometry Optical System Design Optics Laboratory-1 Optical Workshop Programme Elective - 1 Open Elective - 1 Semester II Lasers Systems and Applications Optical Instruments and Metrology Fourier Optics and Optical Information Processing Theory and Applications and Holography Optics Laboratory-II Programme Elective-2/Open Elective-2 Total Credits Semester III Open Elective-2/Programme Elective-2 Programme Elective-3 Major Project Part I Total Credits Semester IV 1. PHD852 Major Project Part 2 Total Credits Program Elective (PE) 9
Applied Optics
Total Credits 60
Type PC PC PC PC PE OE
L-T-P 3-0-0 3-0-0 0-0-6 0-0-6 3-0-0 3-0-0 18 3-0-0 3-0-0 3-0-0 3-0-0 0-0-6 3-0-0
Credits 3 3 3 3 3 3
PC PC PC PC PC PE/OE
3 3 3 3 3 3 18 3 3 6 12 12 12
1. 2. 3. PHD851
OE/PE PE
(0-3-0/0-0-6)
PC
PC
0-0-24
List of Program Electives S.No. Course No. 1. PHL755 2. PHL757 3. PHL759 4. PHL791 5. PHL792 6. PHL795 7. PHL891 8. PHP764 9. PHP853 10. PHS855 Title Statistical & Quantum Optics Optical Materials and Thin Films Selected Topics in Applied Optics Fiber Optics Optical Electronics Optics and Lasers Guided Wave Optical Components and Devices Mechanical Workshop and Engineering Drawing Advanced Optical Workshop Independent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-0-6 0-0-6 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3
35
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 45 Scheduling of Courses S.No. Course No. 1. PHL701 2. 3. 4. 5. 6. PHL703 PHL705 PHL707 PHP711 Semester I Title Electronic Properties of Materials Materials Technology Physics of Semiconductor Devices Characterization of Materials Solid State Materials Laboratory-I Programme Elective-I Total Credits Semester II 1. 2. 3. 4. 4. PHL702 PHL704 PHP712 Science and Technology of Thin Films Semiconductor Device Technology Solid State Materials Laboratory-II Programme Elective-II Open Elective-I Total Credits Semester III 1. 2. 3. PHD801 Major Project Part 1 Open Elective-II Programme Elective - III # Total Credits Semester IV 1. PHD802 Major Project Part 2 Total Credits List of program Electives S.No. Course No. 1. 2. 3. 4. 5. 6. 7. 8. PHL721 PHL722 PHL723 PHL724 PHL725 PHL726 PHL727 PHS731 Title Electronic Ceramics Analytical Techniques Vacuum Science & Cryogenics Magnetism & Superconductivity Physics of Amorphous Materials Nanostructured Materials Quantum Hetetostructures Independent Study Program Elective (PE) 9
Total Credits 60
Type PC PC PC PC PC PE
PC PC PC PE OE
3 3 4.5 3 3 16.5
PC PE PE
6 3 3 12
PC
0-0-24
12 12
Credits 3 3 3 3 3 3 3 3
36
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Semester I S.No. Course No. 1. TTL711 2. 3. 4. 5. 6. 7. TTP711 TTL712 TTP712 TTL713 TTL741 Title Polymer and Fibre Chemistry Polymer and Fibre Chemistry Laboratory Polymer and Fibre Physics Polymer and Fibre Physics Laboratory Technology of Melt spun Fibres Coloration of Textiles Programme Elective-1 Total Credits Semester II 1. 2. 3. 4. 5. 6. TTL714 TTL715 TTP716 Physical Properties of Fibres Technology of Solution Spun Fibres Fibre Production and Post Spinning Operation Laboratory Programme Elective-II Programme Elective-III Open Elective-I Total Credits Semester III 1. 2. 3. TTD891 Programe Elective-IV Open Elective II Major Project Part I Total Credits Semester IV 1. TTD892 Major Project Part II Total Credits List of program Electives S.No. Course No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. TTL717 TTL718 TTL724 TTL742 TTL743 TTL744 TTL763 TTL765 TTL772 TTL773 TTL866 TTS890 Title Advances in Manufactured Fibres High Performance FIbres and Composites Textured Yarn Technology Theory and practice of Textile Finishing Program Elective (PE) 12
Total Credits 60
Type PC PC PC PC PC PC PE
PC PC PC PE PE OE
3 3 2 3 3 3 17
PE OE PC
3 3 6 12
PC
0-0-24
12 12
L-T-P 3-0-0 3-0-0 3-0-0 2-0-2 2-0-2 3-0-0 2-1-0 2-1-0 2-0-2 3-0-0 2-1-0 0-3-0
Credits 3 3 3 3 3 3 3 3 3 3 3 3
Principles of Colour Measurement and Communication Environmental Management in Textile and Allied Industries Technical Textiles Product Development Computer Programming and it's application Design of experiment and Statistical Techniques Functional & High Performance Textiles Independent Study
37
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Semester I S.No. Course No. 1. TTL721 2. TTL722 3. TTL731 4. TTL771 5. TTP761 6. Title Theory of Yarn Structure Mechanics of spinning processes Theory of Fabric Structure Electronics and Controls for Textile Industry Evaluation of Textile Materials - I Programme Elective - I Total Credits Semester II Selected Topics in Fabric Manufacture Technical Textiles Design of Experiments and Statistical Techniques Evaluation of Textile Materials - II Programme Elective - II Programme Elective - III Open Elective - I Total Credits Semester III Major Project Part 1 Programme Elective - V Open Elective - II Total Credits Semester IV Major Project Part 2 Total Credits Program Elective (PE) 12
Textile Engineering
Total Credits 60
Type PC PC PC PC PC PE
Credits 3 3 3 4 1 3 17 3 3 3 1 3 3 3 19 6 3 3 12 12 12
1. 2. 3. 4. 5. 6. 7.
PC PC PC PC PE PE OE
1. 2. 3.
TTD893
PC PE PE
1.
TTD894
PC
0-0-24
List of Program Electives S.No. Course No. 1. TTL714 2. TTL723 3. TTL724 4. TTL732 5. TTL751 6. TTL761 7. TTL762 8. TTL764 9. TTL765 10. TTL772 11. TTL866 12. TTS891 Title Physical Properties of Fibres Selected Topics in Yarn Manufacture Textured Yarn Technology Computer Aided Fabric Manufacturing Apparel Engineering and Quality Control Costing, Project Formulation and Appraisal Management of Textile Production Process Control in Spinning and Weaving Product Development Computer Programming and its Applications Functional and High Performance Textiles Independent Study L-T-P 3-0-0 2-1-0 3-0-0 2-0-2 2-0-2 2-1-0 3-0-0 3-0-0 2-1-0 2-0-2 2-0-1 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 3 3
38
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 41 Scheduling of Courses S.No. Course No. 1. CRL711 2. CRL713 3. CRP723 4. 5. 6. EEL762
Total Credits 62
1. 2. 3. 4. 5. 6.
1. 2. 3.
CRD811
1.
CRD812
Semester I Title CAD of RF and Microwave Devices Fundamental of RF Electronics Fabrication Techniques for RF and Microwave Devices Digital Communication Program Elective - I Open Elective - II Total Credits Semester II Architectures and Algorithms for DSP Systems RF and Microwave Measurement Lab RF and Microwave Measurement System Techniques Programme Elective - III Programme Elective - IV Open Elective - I Total Credits Semester III Major Project Part 1 Programme Elective - V Open Elective - II Total Credits Semester IV Major Project Part 2 Total Credits
Type PC PC PC PC PE PE
Credits 4 3 3 3 3 3 19 4 3 3 3 3 3 19 6 3 3 12 12 12
PC PC PC PE PE OE
PC PE OE
0-0-12
PC
0-0-24
List of Programme Electives S.No. Course No. 1. CRL704 2. CRL705 3. CRL707 4. CRL712 5. CRL715 6. CRL720 7. CRL721 8. CRL722 9. CRL725 10. CRL726 11. CRL728 12. CRL731 13. CRL732 14. CRL733 15. CRL737 16. CRD802 17. EEL731 18. EEL765 19. EEL711 20. EEL768 21. IDL712 22. CRS735 Title Sensor Array Signal Processing Advanced Sensor Array Signal Processing Human and Machine Speech Communication RF and Microwave Active Circuits Radiating Systems for RF Communication SAW Devices and Applications Analog/RF IC Modelling and Design RF and Microwave Solid State Devices Technology of RF and Microwave Solid State Devices RF MEMS Design and Technology RF Electronic System Design Techniques Selected Topics in RFDT-I Selected Topics in RFDT-II Selected Topics in RFDT-III Selected Topics in Radars and Sonars Minor Project Digital Signal Processing Sonar System Engineering Signal Theory Detection and Estimation Electronic Techniques for Signal Conditioning and Interfacing Independent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 2-0-2 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-0-6 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
39
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses S.No. Course No. 1. MAL701 2. 3. 4. 5. CSL630 MAL705 MAP707 EEL702 CSL665 Program Elective (PE) 12
Computer Applications
Total Credits 60
6.
1. 2. 4. 4. 5. 6.
1. 2. 3. 4.
JCD801
1.
JCD802
Semester I Course Title Introducation to Programming & Data Structures (Non CS Background) Data Structures and Algorithm (CS Background) Discrete Mathematical Structures Programming Language Lab (Using High level languages) System Software (Non CS Background) Introducation to Logic and Functional Programming (CS Background) Programme Elective - 1 Total Credits Semester II Data Base Management Systems Computer Organisation & Operating Systems (Non CS Background) Numerical Optimization (CS Background) Scientific Software Lab Program Elective - 2 Open Elective - 1 Total Credits Semester III Program Elective - 3 Program Elective - 4 Open Elective - 2 Major Project, Part I Total Credits Semester IV Major Project Part II Total Credits
Type PC
L-T-P 3-0-2
Credits 4
PC PC
3-0-0 0-0-4
3 2
PC PE
3-0-2 3-0-0
4 3 16 4 4
PC PC
3-0-2 3-0-2
PC PE OE
3 3 3 17 3 3 3 6 15 12 12
PE PE OE PC
PC
0-0-24
40
List of Program Electives for M Tech Programme in Computer Applications S.No. Course No. 1. MAL702 2. CSL740/ MAL745 3. CSL665 4. 5. CSL672/ EEL703 CSL781 EEL754/ MAL754 EEL758/or SML815/ CSL671 CSL783/ EEL715 CSL840 EEL706 MAL823/ CSL865 CSL758 CSL862 CSL868 CSL864 EEL707 EEL708 EEL751 EEL709/ MAL803 EEL804 MAL715 MAL717 MAL724 MAL720 MAL703 MAL711 MAL714/ AML707 ASL850 JCD799 JCS800 EEL853 Title File Systems and Data Management Software Engineering/ Software Engineering Introduction to logic and Functional Programming (Non-CS background) Computer Networks Computer Graphics Principle of Computer Graphics Intelligent Knowledge Based System Design Decision Support and Expert Systems Artificial Intelligence Digital Image Analysis / Image Processing Computer Vision Special Topics in Computer Applications Advanced Algorithms Special Topics in Software Systems Special Topics in Database Systems Special Topics in Artificial Intelligence Multimedia Systems Information Retrieval Computer System Software (CS Background) Pattern Recognition Scintific Visualization Statistical Computing Fuzzy Sets and Applications Cryptology Neuro-Computing & Applications Numerical Algorithms for Parallel Computing Algorithmic Combinatorics Finite Elements Techniques and Computer Implementation Numerical Modeling of Atmospheric Processes Minor Project Independent Study Agent Technology L-T-P 3-0-0 3-0-2 3-0-2 3-0-2 3-0-0 3-0-3 3-0-2 3-0-0 2-0-2 3-0-2 3-0-3 3-0-2 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-2 3-0-0 3-0-2 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-0-6 0-3-0 3-0-0 Credits 3 4 4 4 3 4.5 4 3 3 4 4.5 4 3 3 3 3 3 4 3 4 3 3 3 3 3 3 3 3 3 3 3 3 3
6.
7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29.
41
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses S.No. Course No. 1. ESL740 2. ESL711 3. ESL760 4. ESP713 5. 6. Semester I Title Non-conventional Sources of Energy Fuel Technology Heat Transfer Energy Laboratories Programme Elective - 1 Open Elective - I Semester II Energy Conservation Energy, Ecology & Environment Economics & Planning of Energy Systems Direct Energy Conversation Programme Elective - 2 Open Elective - 2 Semester III 1. 2. 3. Programme Elective - 3 Programme Elective - 4 Major Project Part 1 Semester IV 1. JED802 Major Project Part 2 Total Credits
Energy Studies
Total Credits 60
Type PC PC PC PC PE OE
L-T-P 3-0-0 3-0-0 3-0-0 0-0-6 3-0-0 3-0-0 Total 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 Total 3-0-0 3-0-0 0-0-12 Total 0-0-24
Credits 3 3 3 3 3 3 18 3 3 3 3 3 3 18 3 3 6 12 12 12
1. 2. 3. 4. 5. 6.
PC PC PC PC PE OE
JED801
PE PE PC
PC
List of Programme Electives S.No. Course No. 1. ESL718 2. ESL770 3. ESL715 4. ESL732 5. ESL870 6. ESL714 7. ESL860 8. ESL840 9. ESL810 10. ESL850 11. ESL722 12. ESL768 13. JED799 14. ESL774 15. ESL784 16. ESL880 17. ESL875 18. JES800 Title Power Generation, Transmission & Distribution Solar Energy Utilisation Applied Physics Bio-conversion & Processing of Waste Fusion Energy Power Plant Engineering Power System Analysis Solar Architecture MHD Power Generation Solar Refrigeration & Air-conditioning Integrated Energy Systems Wind Energy & Hydro Power Systems Minor Project Quantitative Methods on Energy Management & Planning Cogeneration & Energy Efficiency Advanced Energy Studies Alternative Fuels for Transportation Independent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-0-6 3-0-0 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
42
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 45 Scheduling of Courses Semester I S.No. Course No. 1. ESL740 2. ESL711 3. ESL777 1. 2. 3. ESL791 ESL704 ESL712 Program Elective (PE) 9
1. 2. 3.
4. 5.
ESL725 ESL794
1. 2. 3.
Course Title Non-conventional Sources of Energy Fuel Technology Environmental Science & Engineering Compulsory Bridge Audit Courses Applied Mathematics & Computational Methods Basic Electrical Engineering (For NonMechanical Engineering) Basic Electrical Engineering (For NonElectrical Engineering) Total Credits Semester II Energy Laboratories Energy Conservation Quantitative Methods for Energy Management & Planning Compulsory Bridge Audit Courses Energy Auditing Principles of Chemical Processes & Combustion Total Credits Semester III Programme Elective - 1 Programme Elective - 2 Programme Elective - 3
Type PC PC PC
Credits 3 3 3 1 1 1 9
PC PC PC
3 3 3
1-0-0 1-0-0
1 1 9 3 3 3 9
PE PE PE
Semester IV (Any one of the Modules A,B,C, & D) Module 1. 2. 3. Module 1. 2. 3. Module 1. 2. 3. A ESL776 ESL784 ESL778 B ESL756 ESL764 ESL766 C ESL718 ESL860 ESL804 Industrial Energy and Environmental Analysis Cogeneration and Energy Efficiency Industrial Waste Management and Recycling Energy Policy & Planning Environmental Economics Environmental Regulation Power Generation, Transmission and Distribution Electrical Power System Analysis Pollution Control in Power Plants PC PC PC PC PC PC PC PC PC 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3 3 3 3 3 3 3 3 3
43
Module D 1. ESL788
Industrial and Commercial Applications of Renewable Energy Sources 2. ESL736 Power from Renewable and Environmental Impacts 3. ESL742 Economics and Financing of Renewable Energy Systems Total Credits Semester V Programme and Open Electives 1. JSD801 Major Project Part 1 2. Programme Elective - 4 3. Programme Elective - 5 Total Credits Semester VI 1. JSD802 Major Project Part 2 Total Credits List of Program Electives Title Energy, Ecology & Environment Intergrated Energy Systems Direct Energy Conversion Hazardous Waste Management Power Systems Planning & Operation Environmental Audit and Impact Assessment Wind Energy and Hydro Power Systems Instrumentation and Control in Energy Systems Energy Analysis Advanced Energy Systems Project Evaluation and Management Operation and Control of Electrical Energy Systems Fusion Energy Alternative Fuels for Transportation Independent Study
PC PC PC
3 3 3 9
PC PE PE
6 3 3 12 12 12
PC
0-0-24
A.
S.No. Course No. 1. ESL710 2. ESL722 3. ESL730 4. ESL735 5. ESL738 6. ESL745 7. ESL768 8. ESL771 9. ESL785 10. ESL792 11. ESL795 12. ESL796 13. ESL870 14. ESL875 15. JSS800
L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0
Credits 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
44
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 43 Scheduling of Courses Program Elective (PE) 12
Total Credits 61
Semester I S.No. Course No. 1. ITL711 2. 3. 4. 5. ITL703 ITL705 ITL709 Title Reliability, Availability and Maintainability (RAM) Engineering Fundamentals of Tribology Materials for Tribological Applications Maintenance Plannning and Control Programme Elective I / Programme Elective II / Open Elective I Total Credits Semester II Diagnostic Maintenance and Monitoring Failure Analysis and Repair Design of Tribological Elements Programme Elective II / III Programme Elective IV / Open Elective Total Credits Semester III Major Project Part 1 Open Elective I / Programme Elective III Open Elective - III Total Credits Semester IV Major Project Part 1 Total Credits Type PC PC PC PC PE PE / OE L-T-P 3-0-0 3-0-2 3-0-0 3-0-0 3-0-0 3-0-0 Credits 3 4 3 3 3 19 4 4 4 3 3 18 6 3 3 12 12 12
1. 2. 3. 4. 5.
PC PC PC PE PE
1. 2. 3.
JID801
PC OE / PE OE
JID802
PC
0-0-24
Programme Elective Courses S.No. Course No. 1. ITL716 2. ITL717 3. ITL730 4. ITL740 5. ITL752 6. ITL760 7. ITL770 8. ITL810 9. JIS800 Title Computer Application in Maintenance Management Corrosion and its Control Lubricants Risk Analysis and Safety Bulk Materials Handling Noise Monitoring and Control Design for Maintenance Bearing Lubrication Independent Study L-T-P 2-0-2 3-0-0 2-0-2 2-1-0 2-0-2 2-0-2 2-0-2 2-0-2 0-3-0 Credits 3 3 3 3 3 3 3 3 3
45
Name of the M.Tech. Programme Distribution of Total Credits Program Core 40 Scheduling of Courses S.No. Course No. 1. IDP703 2. IDL711 3. 4. 5.
Instrument Technology
Program Elective 12
Open Elective 9
Total Credits 61
1. 2. 3. 4. 5. 6.
1. 2. 3. 4.
1. * LTP
Semester I Title Instrument Technology Laboratory - I Instrumentation Transducers Programme Elective - 1 Programme Elective - 2 Open Elective - 1 Total Credits Semester II IDP704 Instrument Technology Laboratory - II IDL712 Electronic Techniques for Signal Conditioning and Interfacing IDL714 Instrument Design and Simulations IDL734 Laser Based Instrumentation Programme Elective - 3 Open Elective - 2 Total Credits Semester III IDP705 Advanced Instrument-Technology Lab JTD801 Major Project Part 1 Programme Elective - 4 Open Elective - 3 Total Semester Credits Semester IV JTD802 Major Project Part 2 Total Credits may be 3-0-0 or 0-3-0
Type PC PC PE PE OE
PC PC PC PC PE OE
PC PC PE OE
PC
0-0-24
Programme Elective Courses S.No. Course No. IDL713 1. 2. IDL716 3. IDL721 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. IDL722 IDL724 IDL730 IDL731 IDL732 IDL735 IDL741 IDP742 IDL811 IDC812 EEL723 EEL801 EEL836 MEL731 MEL786 AML710 PHL790 PHL754 JTS801 Title Advanced Electronic Components and Circuits (for non-Electrical/Electronic students only) Quality Control and Standardisation Materials and Mechanical Design (for non-Mechanical students only) Precision Measurement Systems Advanced Fabrication and Finishing Photochemical Machining Optical Components and Basic Instruments Optical Materials and Techniques Scientific and Engineering Applications of Moire Patterns Instrument Organisation and Ergonomics Industrial Design Practice Selected Topics in Instrumentation Term Paper & Seminar Microprocessor Based Industrial Control Microprocessor Based System Design Biomedical Electronics Design of Mechanisms and Manipulators Metrology Computer Aided Design Integrated Optics (PH) Optical Instrumentation & Metrology Independent Study L-T-P 3-0-0 3-0-0 3-0-2 3-0-0 3-0-0 2-0-2 3-0-0 3-0-0 2-0-2 2-0-2 1-0-4 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-2 2-0-2 3-0-2 3-0-0 3-0-0 0-3-0 Credits 3 3 4 3 3 3 3 3 3 3 3 3 3 3 3 3 4 3 4 3 3 3
46
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 42 Scheduling of Courses Program Elective (PE) 9
Total Credits 60
Semester I S.No. Course No. 1. PHL791 2. PHL793 3. EEL714 4. JOP791 5. 6. Title Fibre Optics Semiconductor Optoelectronics Digital Communication and Information Systems Fiber Optics and Optical Communication Lab-I Programme Elective-1 Open Elective-1 Total Credits Semester II Optical Electronics Broadband Communication and Information Systems Optical Communication Systems Fiber Optics and Optical Communication Lab-II Programme Elective-2 Open Elective-2 Total Credits Semester III Programme Elective-3 Open Elective-3 Major Project Part 1 Total Credits Semester IV Major Project Part 2 Total Credits Type PC PC PC PC PE OE L-T-P 3-0-0 2-0-2 3-0-0 0-0-6 3-0-0 3-0-0 Credits 3 3 3 3 3 3 18 3 3 3 3 3 3 18 3 3 6 12 12 12
1. 2. 3. 4. 5. 6.
PC PC PC PC PE OE
1. 2. 3.
JOD801
PE OE PC
1.
JOD802
PC
0-0-24
List of Program Electives S.No. Course No. 1. PHL755 2. PHL790 3. PHL795 4. PHL797 5. PHL798 6. PHL891 7. EEL790 8. EEL813 9. ELL814 10. EEL890 11. JOS800 Title Statistical Quantum Optics Integrated Optics Optics and Lasers Selected Topics I Selected Topics II Guided Wave Optical Components and Devices Optoelectronic Instrumentation Selected Topics III Selected Topics IV Photonic Switching and Networking Independent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 3
47
Name of the M.Tech. Programme Distribution of Total Credits Program Core 42 Scheduling of Courses S.No. Course No. 1. PTL701 2. PTL703 3. PTL705 4. PTL707 5. PTL709 6. PTP710 Semester I Title Polymer Chemistry Polymer Physics Polymer Characterization Polmer Engineering & Rheology Polymer Technology Polymer Science Lab Open Elective** Total Credits Semester II Polymer Processing Polymer Testing & Properties Polymer Engineering Lab Program Elective-I Program Elective-II Program Elective-III Open Elective-I Total Credits Semester III Program Elective-IV Open Elective-II Major Project Part 1 Total Credits Semester IV Major Project Part 2 Total Credits Program Elective 12
Type PC PC PC PC PC PC OE PC PC PC PE PE PE OE PE OE PC PC
L-T-P 0-0-3 3-0-0 2-0-2 3-0-0 3-0-0 0-0-4 3-0-0 0-0-6 3-0-0 0-0-2 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-0-12 0-0-24
1. 2. 3. 4. 5. 6. 7. 1. 2. 3. 1.
JPD801 JPD802
** Optional Programme Elective Courses S.No. Course No. 1. PTL711 2. PTL712 3. PTL714 4. PTL716 5. PTL718 6. PTL720 7. PTL722 8. PTL724 9. BML820 10. BML710 11. BML830 12. MEL791 13. MEL792 14. CYL716 15. CYL704 16. ITL705 17. DIP752 18. AML705 19. BEL708 20. CHL701 21. CHL603 22. CHL723 23. CH626N 24. CHL724 25. CHL743 26. JPD799 27. JPS800 Title Engineering Plastics & Specially Polymer Polymer Composites Polymer Blends & Alloys Rubber Technology Polymer Reaction Engineering Polymer Product & Mould Design Polymer Degradation & Stabilization Polymeric Coatings Bio Materials Industrial Biomaterial Tech. Biosensor Technology Composit Materials and Processing Injection Moulding & Mould Design On-line Methods of Chemical Analysis Chemical Computations Material for Tribo-Applications Computer Aided Product Design Finite Element Methods Bioseparation Process Engineering Advanced Transport Phenomena Chemical Reaction Engineeing Fluid Flow in Process Equipment Environmental Engineering & Waste Management Petrochemical Technology Minor Project Independent Study L-T-P 3-0-0 3-0-0 3-0-0 3-0-0 2-1-0 2-0-2 3-0-0 3-0-0 3-0-0 3-0-0 3-0-2 3-0-2 2-0-2 3-0-0 2-0-2 3-0-0 1-0-4 3-0-2 3-0-4 3-0-2 3-0-0 3-0-0 3-0-0 3-1-0 3-0-0 0-0-6 0-3-0 Credits 3 3 3 3 3 3 3 3 3 3 4 4 3 3 3 3 3 4 5 4 3 3 3 4 3 3 3
48
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 43 Scheduling of Courses
Total Credits 61
Semester I Title MOS VLSI Synthesis of Digital Systems Digital Systems Design Lab Elective-I Elective-II Total Credits Semester II 1. EEL832 Computer Aided VLSI Design 2. EEL784 IC Technology 3. EEL731 Digital Signal Processing-I 4. CRL702 Architectures & Algorithms for DSP Systems Elective-3 5. EEP736 Physical Design Lab Total Credits Semester III 1. JVD801 Major Project Part 1 2. Elective-4 3. Elective-5 4. Elective-6 5. EEP788 IC Processing Lab* Total Credits Semester IV 1. JVD802 Major Project Part 2 Total Credits * The course will be registered in the 3rd semester. The Laboratory will be second and third semester. S.No. Course No. 1. EEL734 2. CSL719 3. CSP745 4. 5. List of Programme Elective S.No. Course No. 1. CSL672/ EEL703 2. CSL718 3. CSL812 4. CSL821 5. EEL781 6. EEL782 7. EEL802 8. EEL831 9. EEL786 10. EEL833 11. EEL787 12. EEL881 13. CRL702 14. CRL704 15. 16. 17. 18. 19. CSL633/ EEL602 JVD801 JVS802 CSL858 MAL701 Title Computer Networks
Credits 3 4 3 3 3 16 3 3 3 4 3 3 19 6 3 3 3 3 18
PC PC PC PC OEI/PE PC
PC OEI/PE OEII/PE PE PC
PC
0-0-24
L-T-P 3-0-2 3-0-2 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-2 0-0-6 0-3-0 3-0-2 3-0-2
Credits 4 4 3 3 3 3 3 3 3 3 3 3 3 3 4 3 3 4 4
Architecture of High Performance Computer Systems System Level Design & Modelling of Digital Systems Reconfigurable Computing Neural Networks Analog ICS Testing and Fault Tolerance Digital Signal Processing-2 Mixed Signal Circuit Design Selected Topics in IEC Memory Design and Testing Issues in Deep Submicron CMOS IC Design Advanced IC Technology Advanced Process and Devices Characterization (Measurement) Resource Management in Computer Systems or Operating Systems Minor Project Independent Study Advanced Computer Networks Introduction of Programming and Data Structure
49
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 45 Scheduling of Courses S.No. Course No. 1. ITL702 2. MEL626 3. EEL641 4. MEP691/ EEP691 5. MEL725/ EEL743/ EEL721 6. MEL727/ EEL791 EEL772 Program Elective (PE) 9
Total Credits 60
1. 2. 3. 4. 5. 6.
1. 2. 3.
JGD801
1.
JGD802
Semester I Course Title Diagnostic Maintenance and Monitoring Mechanical Equipment in Power Plants Electrical Equipment in Power Plants Basic Mechanical Laboratory (For EE & C&I)/ Basic Electrical Laboratory (For ME) Power Plant Steam Generators (For ME)/ Power Electronic Devices & D.C. Converters (For EE)/ Linear System Theory (Fro C&I) Power Plant Turbo machinery (For ME)/ Power System Analysis (For ME)/ Optimal Control Theory (For C&I) Total Credits Semester II Instrumentation & Automatic Control Systems Power Plant Performance and Economics Advanced Mechanical Laboratory/ Advanced Electrical Laboratory Program Elective-1 Program Elective-2 Open Elective-1 Total Credits Semester III Program Elective - 3 Open Elective - 2 Major Project Part 1 Total Credits Semester IV Major Project Part 2 Total Credits
Type PC PC PC PC PC
PC
L-T-P 3-0-2 3-0-0 3-0-0 0-0-2/ 0-0-2 3-0-0/ 3-0-0 3-0-0 3-0-0/ 3-0-0 3-0-0
3/3/3
PE OE PC
PC
0-0-24
50
List of Program Electives S.No. Course No. 1. ITL760 2. ITL714 3. ITL717 4. MEL708 5. MEL709 6. MEL712 7. MEL730 8. MEL806 9. MEL807 10. MEL811 11. MEL812 12. MEL733 13. MEL741 14. MEL838 15. MEL760 16. ESL711 17. EEL745 18. EEL792 19. EEL797 20. EEL796 21. EEL799 22. EEL823 23. EEL824 24. EEL744 25. EEL841 26. EEL746 27. EEL894 28. IDL811 29. JGL712 30. JGS800 Title Noise Monitoring & Control Failure Mechanism Analysis & Repair Corrosion & its Control Combustion Generated Pollution and Control Heat Exchangers Advanced Power Plant Cycles Hydroelectric Power Plants Thermal Systems Simulation and Design Computational Heat Transfer Steam and Gas Turbines Combustion Vibration Engineering Blade and Disc Dynamics Rotor Dynamics Project Management Fuel Technology Electrical Drives System Power Systems Protection Power Systems Dynamics Power Systems Control & Instrumentation Power Systems Reliability Discrete Time Systems Non-linear Systems AC Controllers Solid State Controllers of Drives Non-conventional Energy Systems & Energy Conservation Flexible AC Transmission Systems (FACTS) Selected Topics in Instrumentation Power Plant Control & Instrumentation Independent Study L-T-P 2-0-2 3-0-2 3-0-0 3-0-2 3-0-2 2-0-4 3-0-0 2-0-2 2-0-4 3-0-2 3-0-2 3-0-2 3-0-2 3-0-2 2-0-2 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-3-0 Credits 3 4 3 4 4 4 3 3 4 4 4 4 4 4 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
51
Name of the M.Tech. Programme Distribution of Total Credits Program Core (PC) 45 Scheduling of Courses S.No. Course No. 1. EEL711 2. EEL762 3. EEL767 4. EEP773 5. EEP776 6. SML723 Program Elective (PE) 09
Total Credits 60
1. 2. 3. 4. 5. 6.
1. 2. 4.
JMD801
1.
JMD802
Semester I Title Signal Theory Digital Communications Telecommunication Systems Telecommunication Software Laboratory Wireless Communication Laboratory Telecommunication Systems Management Total Credits Semester II Telecommunication Technologies Telecommunication Networks Lab-I Minor Project Program Elective - I (Management Elective) Program Elective - II Open Elective - I Total Credits Semester III Major Project Part 1 Open Elective - II Program Elective - III Total Credits Semester IV Major Project Part 2 Total Credits
Type PC PC PC PC PC PC
Credits 3 3 3 3 3 3 18 3 3 3 3 3 3 18 6 3 3 12 12 12
PC PC PC PE PE OE
PC OE PE
PC
0-0-24
List of Program Electives S.No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Course No. EEL703 EEL707 EEL716 EEL731 EEL817 EEL854 EEL855 EEL857 EEL858 EEL859 EEL860 EEL861 EEL862 EEL882 EEP757 EEP858 EEP881 SML726 SML728 JMS800 Title Type Computer Networks PE Multimedia Systems PE Telecommunication Transmission & Switching PE Digital Signal Processing PE Access Networks PE Protocol Engineering PE Internet Technologies PE Network Security PE Mobile Computing PE Network Management PE Wireless Communication Networks PE Selected Topics in Telecommunication Engineering I PE Selected Topics in Telecommunication Engineering II PE Introduction to Telecommunication Systems (Audit/Bridge) PE Embedded Telecommunication Systems Laboratory PE Telecommunication Networks Lab-II PE Network Software Laboratory PE Telecommunication Systems Analysis, Planning & Design PE International Telecommunication Management PE Independent Study PE L-T-P 3-0-0 3-0-2 3-0-0 3-0-0 3-0-0 3-0-2 3-0-2 3-0-2 3-0-0 3-0-2 3-0-2 3-0-0 3-0-0 3-0-0 0-1-4 0-1-4 0-1-4 3-0-0 3-0-0 0-3-0 Credits 3 4 3 3 3 4 4 4 3 3 4 3 3 3 3 3 3 3 3 3
52
AML 706 Finite Element Methods and its Applications to Marine Structures: 3 credits (3-0-0)
Introduction to FEM. Variational methods. Element types and properties. Boundary conditions. Stress-strain determination. Solution techniques. Mesh refinement. Convergence criterion. Frames, beams and axial element. Plane stress. Plane strain. Axisymmetric problems. Plate bending. Fluid mechanics and heat transfer. Modules modelling and elastic analysis. Super elements. Structural instability of frames and beams.
II Semester Courses
Finite Element Methods and its Applications to Marine Structures 3 credits (3-0-0)
III Semester Courses AML733 AMD899 Dynamics Design Project 3 credits (3-0-0) 10 credits (0-0-20) and non-linear algebraic equations. Boundary value problems and initial value problems. Numerical solution of partial differential equations. Eigenvalue problems.
AML 700 Experimental Methods for Solids and Fluids: 4 credits (3-0-2) Basic principles of experimental analysis, strain gauges and strain gauge
circuits. Rosettes. Photoelasticity. Brittle coating method. Moire fringe methods, holography, etc. Flow visualization techniques. Measurement of pressure, velocity, discharge in fluid flow. Hot wire anemometry. Hot film anemometry, laser Doppler anemometer. Instrumentation in two-phase flows. Recent developments.
53
Applied Mechanics fluid flow and applications. Creeping flow. Boundary layer theory. Transition and turbulance. Turbulant boundary layer. Fundamentals of compressible flows. Modelling and dimensional analysis.
for beams. Torsional vibrations. Continuous systems. Lagranges equations. Balancing of shaft. Self excited vibration.
AML 714 Fluid Flow Analysis and Applications to Power Plants: 3 credits (3-0-0)
Introduction to flow types, fluid statics, relative equilibrium and kinematics. Fluid flow equations for mass, momentum, angular momentum, energy and their applications. Inviscid flows. Flow through pipes and Reynolds number effects. Navier-Stokes equations and applications. Models of turbulence. Boundary layer flows. Thermal boundary layers. Boundary layers in power plant flows (case study). Pipe networks. Turbulent flows in power plant flows (case study). Plane and axi-symmetric jets and wakes and their applications in power plants (case study). Compressible flows and applications in power plants (case study). Transportation of material by fluid flows. Types of complex mixtures. Two phase flows. Phase separation and settling behaviour. Slurry pipeline transportation and applications in power plants (case study). Review of numerical methods in fluid flows. Basic principles of experimental analysis. Flow visualization techniques. Flow metering and other fluid devices for measurement of pressure, velocity, discharge, etc. and their applications in power plants (case study).
54
AMP 776 Product Design Project I: 3 credits (1-0-4) AMP 777 Product Design Project II: 2 credits (0-0-4)
The above two courses would be run in successive semesters. The combined project work would comprise the following: Application of systematic design procedure for the design of a chosen industrial product. Students are expected to carry out all the three phases of the design cycle including fabrication and testing. Lectures will deal with ergonomical factors in product design.
Salient features of warships, merchantships, naval auxiliaries and yard-craft Principles and morphology of engineering design. Design spiralFeasibility studies. Preliminary design. Detailed design Warship design and production procedures. Staff requirements. Design activities. Drawing and specifications. Ship productionTests and trials. General arrangement drawingsWeapon layout. Mass and space analysis. Stability aspects, Resistance, propulsion. Seakeeping and manoeuvering considerations in design. Structural considerations. Survivability Cost aspects. Special types of hull forms. Computer aided ship design.
Flotation and trim. Hydrostatics. Survivability. Surface unsinkability. Stability. Design of pressure proof structures. Design of school mounts of equipments. Resistance. Methods of drag reduction. Selection propulsion system. Endurance and indiscretion rates. Sea motions. Manoeuverability in vertical and horizontal planes and control surface design. Habitability. Ergonomics. Stealth systems. Submarine design procedures. System approach of submarine design and military economic analysis. Use of computers in submarine design. Outer hull lines development. Simulation of submarine in vertical plane.
AMS 801 Independent Study: 3 credits (0-3-0) AMS802 Independent Study: 3 credits (0-3-0) AML 803 Continuum Mechanics: 3 credits (3-0-0)
Fundamental concepts. Thermodynamics of homogeneous processes. Equipresence. Kinematics. Field laws. Constitutive equations of simple materials. The isotropy group. Representative applications of solids, fluids and materials with fading memory.
Automatic mesh generation techniques. Post-processing. Stress smoothing. Error analysis. P and H version. Adaptivity. Hierarchical formulations. Transition elements. Mixed formulations. FEM analysis of plates and shells. Parallel computing in FEM. Material and
55
Applied Mechanics geometric non-linearity. Mode superposition and direct integration techniques for dynamic problems. by fluid flow. Rheology and classification of complex mixtures. Fundamentals of two-phase flow. Phase separation and settling behaviour. Slurry pipeline transportation. Design methods. Terminal facilities. Pipe protection. Pneumatic conveying, pneumocapsule and hydrocapsule pipelines. Metrology associated with pipelines. invariant form. Membrane theory. Moment theory. Rotationally symmetric shells. Shallow shell theory. Examples.
Introduction. Recapitulation of classical plate theory. Orthotropic plate bending. Simplified 4th order theory. Panels and grillages. Naviers and Levys solutions. Stability. Bending of circular cylindrical shells. Stability of semi-infinite and finite cylinders. Donnel equations. Shells of revolution. Applications.
AMD 811 Major Project Part-I: 6 credits (0-0-12) AML 812 Turbulent Shear Flows: 3 credits (3-0-0)
Origin of turbulence. Review of phenomenological theories. Structure of wallturbulence and free-turbulence. Turbulent boundary layers. Plane and axisymmetric jets and wakes.
AML 816 Compressible Fluid Flow and Gas Dynamics: 3 credits (3-0-0)
Fundamentals of plasticity theory. Solution of elastoplastic problems. Theory and application of slip-line field. Bound theorems. Plastic anisotropy. Large deformations. Dynamic plasticity.
Review of one-dimensional flows. Twodimensional flows. Shocks and interactions. Small perturbation theory. Method of characteristics. Stockboundary layer interaction. Viscous effects. Introduction to flows with chemical reactions. Dynamics of radiating gases. Hypersonic flows.
AMD 812 Major Project Part-II: 12 credits (0-0-24) AMD 813 Major Project Part-I: 6 credits (0-0-12) AML 813 Impeller Pumps: 3 credits (3-0-0)
Fundamental notations and classification of impeller pumps. Flow through impeller. Eulers equation, pressure and velocity distribution in impeller passages. Influence of finite number of blades, impulse and reaction types of impellers. Dynamic similarity. Impeller shapes. Blades with single curvature and double curvature. Centrifugal multistage. pumps, single and
AML 836 Non-linear Vibration and Chaos : 3 credits (3-0-0) Prerequisite: AML701/AML734/ CEL719/MEL733
Mixed flow pumps, helical and diagonal pumps. Propeller pumps, circular cascades. Inlet and outlet systems. Cavitation and net-positive suction head considerations.
AMD 814 Major Project Part-II: 12 credits (0-0-24) AML 814 Fluid Transportation Systems: 3 credits (3-0-0)
Mechanism of transportation of materials
Non-linear system. Analytical and graphical solutions. Solution stability and bifurcation. Fourier transforms. Poincare section. Temporal chaos in dissipative systems. Simple and strange attractors. Fractal dimension and geomatric characterization. Hopf bifurcation and limit cycle. Sub-harmonic instability and periodic doubling.
56
Applied Mechanics grillages. Finite element methods for a structural continuum. Element behaviour. Element families. Computational aspects of finite element methods. and parts made from polymers and ceramic. Reliability and reward. Making of more reliable products using less reliable components: Good as New and Bad as Old concepts. Maintenance policies. Information theoretic approach to reliability. Examples.
Definition of reliability, product pathology, reliability evaluation criteria, Stochastic and Markovian processes, product failure theories, reliability of parallel, standby and series products, reliability of non-maintained and maintained products. Use of signal flow graph theory for evaluating reliability.
AMD 897 Minor Project: 4 credits (0-0-8) AMD 899 Design Project: 10 credits (0-0-20)
57
58
proteins, shape size and conformation; Motifs of protein structure, Alpha domain, Beta domain and Alpha/Beta domain; X-ray analysis of proteins:Mathematical principles, Braggs Law, NMR; Strategies for protein engineering; Random, site directed, catalytic effectivity; Structure prediction and modelling of proteins: Molecular graphics in protein engineering, Dynamics and mechanics; Drugs-protein interactions and Design; Protein engineering benefits: Industry, Medicine; Engineering Antibodies.
partitioning; MF/UF/NF for high resolution separation; Chromatographic techniques; Affinity chromatography and electrophoresis, Separation by gene amplification (PCR), Molecular imprinting.
production; isolation; purification and application of industrial enzymes; immobilized enzymes; stabilization of enzymes; enzyme catalyzed organic synthesis; multienzyme systems.
BE 891S Major Project I: 6 credits (0-0-12) BE 892S Major Project II: 12 credits (0-0-24)
CORE COURSES BEL 810 Enzyme and Microbial Technology: 3 credits (3-0-0) BEL 820 Downstream Processing: 3 credits (3-0-0) BEL 830 Microbial Biochemistry : 3 credits (3-0-0) BEP 840 Lab Techniques in Microbial Biochemistry: 2 credits (0-0-4) BEL 850 Advanced Biochemical Engineering: 5 credits (3-0-4) BED 800 Major Project: 40 credits (0-0-80) COURSE DETAILS BEL 810 Enzyme and Microbial Technology: 3 credits (3-0-0)
Isolation, development and preservation of industrial microorganisms; Substrates for industrial microbial processes; Regulatory mechanisms of metabolic pathways in industrial strains; Analysis of various microbial processes used in production of biomass, primary and secondary metabolites; Microbial leaching of minerals; Microorganisms in degradation of xenobiotics and removal of heavy metals; Biotransformations. Enzymes as industrial biocatalysts;
59
Biochemical Engineering & Biotechnology mixing in bioreactors; Dynamics of mixed cultures; Scale-up and scale down of bioreactors.
Laboratory
Microbial growth and product formation kinetics; enzyme kinetics; Effects of inhibitor on microbial growth; enzyme immobilization techniques; Bioconversion using immobilized enzyme preparation; Bioconversion in batch, fedbatch and continuous bioreactors; Oxygen transfer studies in fermentation; Mixing and agitation in fermenters; RTD studies; Mass transfer in immobilized cell/enzyme reactors.
media; Kinetic modelling of enzyme/ microbial processes; Mass transfer in biochemical processes; Scale up concepts. Batch, fed batch and continuous microbial reactors; Immobilized enzyme/cell reactors; Nonideal effects; sensors for monitoring bioprocess parameters; Bioprocess control and computer coupled bioreactors; Growth and product formation by recombinant cells.
60
Development of mass, momentum and energy balance equations. Equation of change for isothermal systems. Velocity distribution in flow systems. Interphase transport. Microscopic and macroscopic balances. Multicomponent systems and their transport characteristics. Energy transport in non-isothermal systems. Energy transport by radiation.
Elements of reaction kinetics. Kinetics of heterogeneous catalytic reactions. Transport process with fluid-solid heterogeneous reactions. Non-catalytic fluid, solid reactions. Catalyst deactivation. Gas-Liquid reactions. Regression and other statistical methods for Kinetic Parameter Estimation. Determination of transport and reaction parameters by experimental methods.
Formulation and solution of transient and steady-state conduction. Heat transfer analogies. Direct contact heat transfer. Radiative heat transfer from surfaces and flames. Combined convective and radiative heat transfer. Application to furnaces and kilns.
CHL 701 Process Enginering: 4 credits (3-0-2)* CHL 702 Plant Design: 4 credits (3-0-2)
Plant layout, auxiliaries, materials handling, offsite facilities, selection and detailed design of equipments, e.g., mixers, conveyers, heat exchangers, separation equipments, pumps, compressors, etc.
Shell balance for momentum transfer. Velocity profiles. Residence time distribution Measurement techniques. RTD for single phase flow in tubes, coils, packed beds, stirred vessels. Multiphase flow. Stratified and dispersed flows. Interaction between phases Measurement techniques. Modelling and correlations of RTD in different contractors; Trickle beds, packed beds, bubble columns, spray columns, plate columns, fluidised beds etc. Prediction of Pressure drop; Friction factor, drag coefficient, single phase flow, multiphase flow. Lockhart Martinelli approach. Drift flow concept, Rheology.
Design of distillation columns operating under pressure or vacuum; design of tanks for storage of liquids and gases including the selection of accessories; design of tall absorption or strippling columns subjected to seismic and wind loading.
CHL 707Absorption Seperation Process (3-0-0)* CHL 710 Process Dynamics and Control: 5 credits (3-1-2)
Lumped parameter systemsclassical and multivariable control theory. Distributed parameter systems. Measurement of process variables such as temperature, pressure, composition, flow rate, level, density, etc. Dynamics of process instruments and loops. Analogue and digital signals, process actuators and control equipment.
Ecology and Environment. Sources of air, water and solid Wastes. Air Pollution: Micrometeorology and dispersion of pollutants in environment. Fate of pollutants. Air pollution control technologies: centrifugal collectors, electrostatic precipitator, bag filter and wet scrubbers. Design and efficiencies. Combustion generated pollution, vehicles emission control.
61
Chemical Engineering
Case studies. Water Pollution: Water quality modelling for streams. Characterisation of effluents, effluent standards. Treatment methods. Primary methods: settling, pH control, chemical treatment. Secondary method: Biological treatment. Tertial treatments like ozonisation, disinfection, etc. Solid waste collection, treatment and disposal. Waste recovery system.
CHD 760 Minor Project: 3 credits (0-0-6) M.S. (Research) in Chemical Engineering
Minimum requirement of credits for this programme is 60. 20 credits of course work to be completed normally during first semester of admission and 40 credits of research work spread over two or more subsequent semesters.
CHL 794 Petroleum Refinery Engineering (3-0-2)* CHL 795 Agro Process Technology: 3 credits (3-0-0)
Post Harvest Technology of Cereals, Pulses and Oilseeds.Processing of oil seeds, solvent extraction, utilization of rice bran .Storage of food grains.Food chemistry Development of food chemistry .Edible oils and fats: physical and chemical properties, Carbohydrates, Proteins, Flavours and aroma of food. Food preservation and processing: Nutritive aspects of food, food additives,Food adulteration and simple detection techniques, Soilage of food, food poisoning, micro-organisms in foods, Sanitation and cleaning requirements for food processing plants Quality control and quality assurance Food preservation : principles and methods, Fruits and fruit products, Vegetables and vegetable products By-product utilization, Waste utilization. Packaging and packaging materials. Case studies: Biomass utilization, solvent extraction of neem oil and by products from neem seeds, solvent extraction of jojoba oil, Solvent extraction of hops.
CHD 770 Major Project Part-I (0-0-12) CHD 780 Major Project Part-II (0-0-24) CHL 751 Multicomponent Mass Transfer (3-0-0)* CHL 761 Chemical Engineering Mathematics. (3-0-0)* CHL 766 Interfacial Engineering (3-1-0)* CHL 773 Planning of Experiments and Analysis of Engineering Data: 4 credits (3-0-2)
Graphical method of model selection from experimental data.Two variable equations. Linear and logarithmic plots, modified Logarithmic and semilogarithmic plots. Reciprocal plots. Equations for bumped data. Elongated S curve. Sigmoid curvesThree variable empirical equations. Multivariable empirical equation. Dimensionless numbers. Nomography; Introduction, modulus and scale and principle of construction.Application of logarithmic charts.Equations of the form F 1 (x) + F 2 (X) = F 3 (X).Selection of empirical equation for fitting experimental data Testing of hyposthesis, Testing of means and variances. Planning of experiments as per factorial design to estimated significant variables which affect the process.Fractional factorial design to use significant variables to estimates the relationship between the significant variables and independent variable Response surface analysis by reducing the equations developed to canonic equationsEstimations of parameters in equations of second order with interaction factor.Case studies on application to research and industrial data analysis.
CHD 801 Major Project (Part-I): 6 credits. CHD 802 Major Project (Part-II): 12 credits CHL 807 Population Balance Modelling: 3 credits (3-0-0)
Particle size distribution, Crystal size distribution, Comminution processes and other particulate processes, Representation of distribution, Properties of distributions, Particle phase space, population fluxes distributions, particle phase space, population fluxesconvections, Birth and death, particle number continuity equation, Population balance over a macroscopic external coordinate region, Moment transformation of population balance over a macroscopic external coordinate region, Macro-moment equations..., Recovery of particle size distribution function..., Steady state MSMPR crystalliser, Significance of distribution representation, Exponential distribution,
62
Chemical Engineering
Mass balance, Dynamic population balance, CSD transients, Transient moment equations, Transient size distribution by method of characteristics, Stability of CSD, Crystallisation kinetics, Nucleation, Crystal growth, Comminution Processes, Microbial population, Residence-time distribution, Dispersed-phase mixing.
Equilibrium properties such as vapour pressure, latent heats, critical constant and PVT behaviour. Transport properties such as viscosity, thermal conductivity and diffu- sivity, estimation and correlation methods. Properties of multicom- ponent systems : V-L-E using equations and state and group contribution methods. L-L-E correlation and prediction. Homogeneous and heterogeneous chemical equilibria with competing chemical reactions.
CHD 895 Major Project (M.S. Research): 40 credits (0-0-80) CHP 711 Process Development Lab (0-0-6)* CHS 780 Independent Study: (0-3-0)
63
DEPARTMENT OF CHEMISTRY
CYL 701 Electroanalytical Chemistry: 5 credits (3-0-4)
amplification and amplifier feedback, signal processing, fundamental measuring operation, analog instrument design, digital instruments.
Principles of electro-chemical methods, electrochemical reactions, electroanalytical voltammetry as applied to analysis and the chemistry of heterogeneous electron transfers, electrochemical instrumentation.
CYL 716 Data Analysis, Experimental Design, and Chemometrics: 3 credits (3-0-0)
Error propagation, Descriptive statistics, introduction to regression, factor and principal component analysis, simplex and factorial experimental design, optimization, fourier transform.
Theory and applications of equilibrium and nonequilibrium separation techniques. Extraction, countercurrent distribution, gas chromatography, column and plane chromatographic techniques, electr-ophoresis, ultracentrifugation, and other separation methods.
Principles of atomic and molecular spectrometric methods especially UVvisible, IR, fluorescence, AAS, AES, CD, and ORD; discussion of instrumentation, methodology, applications.
Introduction to programming; solution of numerical problems in equilibrium, kinetics, and spectroscopy; overview of molecular modelling, molecular simulations, molecular design, and bioinformatics; use of spectroscopic and structural databases
CYD 799: Minor Project: 3 credits (0-0-6) CYS 800 Independent Study: 3 credits (0-3-0) CYD 801 Major Project I: 6 credits (0-0-12) CYD 802 Major Project II: 12 credits (0-0-24) CYP 803 Glass Blowing: 1 credit (0-0-2)
Experiments in glass blowing using burner, hand torch and lathe.
64
Note : This course is not meant for students specializing in Geotechnical and Geoenvironmental Engineering. Classification, Engineering behaviour of soils effective stress concept, permeability, compressibility, shear strength. Parameters for short and long term stability, Stress distribution, Field explorations - scope and depth of investigations, SPT, DCPT, SCPT. Analysis of bearing capacity of shallow foundations, Plate load test. Settlement computations - Immediate and Consolidation. Codal provisions. Types of pile foundations, load carrying capacity of pile foundations including group effects and negative skin friction. Pile load test.
(To be offered to specialization in Construction Technology and Management) Ground EngineeringEarthwork, earth-moving equipments, soil compaction and stabilization with additives. Ground improvement-Deepin-situ improvement by (a) Vibroloation stone column, (b) compaction piles, (c) impact/dynamic compaction, (d) blasting, (e)pre-loading and drains, (f) in-situ mixing, cement and lime columns. Geotechnical Processes in Soil and Rocks-drilling, blasting, grouting, dewatering. Foundation-piles: (a) precast driven, (b) driven cast in-situ, (c) bored cast in-situ, (d) under-reamed. Caissons. Dams and Embankments-earth dams, earth cum-rock-fill dams, road and rail embankments. Earth Retaining Structures- retaining walls including reinforced earth, braced excavations, sheet piles, diaphragm walls. Underground Structures-tunneling in rock, soil, and in soft ground. Microtunneling.
CED 701 Minor Project in Geotechnical and Geoenvironmental Engineering : 3 credits (0-0-6) CEP 702 Geoenvironmental & Geotechnical Engineering Laboratory: 3 credits (0-0-6)
Engineering properties and compaction characteristics of waste - coal ash , mine tailings. Permeability of clays and bentonite amended soils. Tensile strength of geomembranes, geotextiles. Soil geomembrane interfacial shear strength.
65
Civil Engineering
Project based laboratory for evaluation of engineering properties of soils for design of embankments and foundations.
Geotechnical Processes: Principles of compaction, Laboratory compaction, Engineering behaviour of compacted clays, field compaction techniques- static, vibratory, impact, Earth moving machinery, Compaction control. Shallow Stabilization with additives: Lime, flyash, cement and other chemicals and bitumen . Deep Stabilization: sand column, stone column, sand drains, prefabricated drains, electro-osmosis,lime column. soil-lime column. Grouting : permeation, compaction and jet. Vibro-floatation, dynamic compaction, thermal, freezing. Dewatering systems.
biological characteristics of solid wastes; Soil-waste interaction; Contaminant transport; Laboratory and field evaluation of permeability; Factors affecting permeability; Waste disposal on land. Types of landfills: Siting criteria; Waste containment principles; Types of barrier materials; Planning and design aspects relating to waste disposal in landfills, in ash ponds and tailing ponds, and in rocks. Environmental monitoring around landfills; Detection, control and remediation of subsurface contamination; Engineering properties and geotechnical reuse of waste materials such as coal ash, mining waste, demolition waste etc; Reclamation of old waste dumps; Regulations; Case studies.
CEL 707 Soil Dynamics and Geotechnical Earthquake Engineering: 3 credits (3-0-0)
Engineering problems involving soil dynamics; Role of inertia; Theory of Vibrations: Single and two-degree freedom systems, vibration-measuring instruments, vibration isolation, Wave propagation in elastic media. General nature of soil behaviour under
66
Civil Engineering
cyclic/dynamic loading; Field and Laboratory tests for measurement of small straind and large strain, dynamic properties of soils. Design criteria for machine foundations, elastic homogeneous half space solutions, lumped parameter solutions. Codal provisions. Strong Ground Motion: Measurement, characterization and estimation. Amplification theory and ground response analysis. Densification and liquefaction of granular soils, Seismic slope stability analysis, Seismic bearing capacity and earth pressures. Codal provisions.
consolidated soils, calcareous soils, cemented soils, corals. Offshore site investigations: sampling and sampling disturbance, insitu testing, wireline technology. Offshore pile foundations for jacket type structures. Foundations of gravity structures. Foundations for jack-up rigs. Anchors and breakout forces; anchor systems for floating structures. Stability of submarine slopes. Installation and stability of submarine pipelines.
reaction method; Beam and plate theories; Analysis of footings, mats, pile caps, laterally loaded piles, sheet pile walls, water front structures. Elastic half-space method: Closed form solutions, charts and FEM- footings, mats, reinforced foundations and embankments. Evaluation of relevant material parameters. Use of appropriate software packages.
CEL 714 Special Topics in Geotechnical and Geoenvironmental Engineering: 3 credits (3-0-0)
A course which will vary from year to year to study new and exicting developments in the broad spectrum of Geotechnical and Geoenvironmental Engineering. The course will also focus on new offshoots of Geotechnical and Geoenvironmental Engineering.
67
Civil Engineering
Model testing : Models of plates and shells and frames under static and dynamic loading, free and forced vibrations using MTS, dynamic modulus. Stress analysis : Two and three- dimensional photoelasticity.
68
Civil Engineering
earthen dams, seepage beneath a hydraulic structure, Groundwater flow in confined and unconfined aquifers, Incompressible turbulent flow in pipes.
Application of FEM and BIEM in groundwater modeling, Regional aquifer simulation, Contaminated groundwater systems and their rehabilitation, Development and optimization based management of aquifer systems, Stochastic models, Random field concepts in groundwater models; Application emerging techniques to groundwater management.
CEL 741 Surface Water Quality Modeling and Control: 3 credits (3-0-0)
River hydrology and derivation of the stream equation, Derivation of the estuary equation, Distribution of water quality in rivers and estuaries, Physical and hydrological characteristics of lakes, Finite difference steady state river, estuary and lake models, Dissolved oxygen models in rivers, estuaries and lakes, Fate of indicator bacteria, pathogens and viruses in water, Basic mechanisms of eutrophication, Lake phytoplanckton models, River eutrophication analysis, finite segment models, Elements of toxic substance analysis.
69
Civil Engineering
creation of small GIS modules related to water resources problems and other generic areas.
Data capture for simulation of land surface processes, inventory, Geomorphology, Landuse classification, Landuse planning and landcover mapping, Flood plain mapping, Flood plain zoning, Principles of remote sensing and its applications in water resources, agriculture and environmental monitoring, Applications in snow and glacier studies, Snow line, Ice cover, Snow-pack properties, Integrated use of remote sensing and GIS, Database preparation and Decision support analysis, Estimation of damages due to hydrologic extremes and preparation of contingency plans, Case studies.
uniaxial compression, tension and triaxial state. Laboratory testing methods. Stress-strain relationships. Factors influencing strength. Failure mechanism. Anisotropy. Failure criteria, Coulomb, Mohrs, Griffiths and Modified Griffiths criteria and Empirical criteria. Brittle ductile transition, Post failure behaviour. Strength and deformation behaviour of discontinuities. Rockmass behaviour, Shear strength of jointed rocks, roughness, peak and residual strengths. Strength criteria for rockmass. Intact and rockmass classifications, Terzaghi, RQD, RSR, RMR and Q classifications, Rating, Applications. Creep and cyclic loading. Weathered rocks. Flow through intact and fissured rocks. Dynamic properties.
classification. Three point problems, Depth and thickness problems. Faults, mechanics of faulting, normal, reverse and thrusts, faults. Lineations. Foliations, Schistocity. Fault problems. Stereographic projection methods, Use of DIPS software, presentation of geological data and analysis, Applications, Field visit.
CEP 752 Rock Mechanics Laboratory II: 3 credits (0-0-6) Prerequisite: (CEP751) Project based Laboratory. CEL 752 Slopes and Foundations: 3 credits (3-0-0)
Introduction, Short-term and long-term stability. Influence of ground water, Seismic effects. Types of rock slope failures. Infinite slopes, Circular and noncircular slip surface analysis, Stability charts. Plane failure analysis. Wedge failure analysis analytical, stereographic methods. Buckling and toppling failures, Rock falls, Landslides. Foundations: Bearing capacity, settlement and stress distribution in intact and layered rocks. Foundations of dams. Deep foundations. Tension foundations, Codal provisions. Foundation improvement. Use of appropriate software packages.
Systems concepts and its application in irrigation, flood control, hydropower generation, water supply and drainage, Storage-yield analysis, Rule curves, Reservoir sizing, Multireservoir systems, Real time operation, Water conflicts, River basin planning, Engineering heuristics, Systems reliability, Case studies.
Tests and test procedures, Specimen preparation, coring, cutting and lapping. Tolerance limits. Physical Properties: Water absorption, density, Specific Gravity, porosity, void index, electrical resistivity and sonic wave velocity tests. Mechanical Properties: Uniaxial compression, point load index and Brazilian strength tests, Elastic properties. Effect of L/D ratio and saturation. Strength anisotropy. Shear tests: Single, double, oblique tests, Triaxial compression tests, Direct sheor test. Slake durability and Permeability tests. Compilation of test data. Classification. Codal Provisions.
CEL 751 Engineering Properties of Rocks and Rock Masses: 3 credits (3-0-0)
Introduction. Rock materials, Physical properties, Strength behaviour in
70
Civil Engineering
deformation analysis:One-,Twodimensional formulations; Three-dimensional formulations; Boundary conditions; Solution algorithms; Descretization; use of FEM2D Program and Commercial packages. Analysis of foundations, dams, underground structures and earth retaining structures. analysis of flow (seepage) through dams and foundations. Linear and non-linear analysis. Insitu stresses. Sequence construction and excavation. Joint/interface elements. Infinite elements. Dynamic analysis. Evaluation of material parameters for linear and non-linear analysis, Recent developments.
Landslides and rock falls, slopes stabilization, mitigation, Case studies. Earthquakes, tectonic stresses, creep, ground motions, damage, prediction. Volcanic activity and hazard. Tsunamis. Case studies. Waste disposal, Radioactive and hazardous wastes, repositories, location and design, VLH, VDH and KBS3 concepts. Waste container, barriers, rock structure, embedment, buffers and seals. Performance assessment, quality control and monitoring. Case histories.
Surface and sub surface exploration methods. Aerial and remote sensing techniques, Geophysical methods, electrical resistivity, seismic refraction, applications. Rock drilling: percussion, rotary drilling, drill bits. Core samplers, Core boxes. Logging, stratigraphic profile, scan line survey, oriented cores, classification. Planning of laboratory tests, report. Stresses in rocks, gravity, tectonics, residual, thermal and induced stresses. Stress anisotropy and stress ratio. Stress relief and compensation techniques, USBM, door stopper cells, flat jack, hydrofrac, strain rossette and dilatometers. Soft and rigid inclusions. Deformability, plate load, pressure tunnel and bore hole tests. Strength tests, insitu compression, tension and direct shear tests. Pull out tests. Borehole extensometers, piezometers, embedment gauges, inclinometers, Slope indicators, packer tests for insitu permeability, Codal provisions.
Introduction. Types and classification of underground openings. Factors affecting design. Design methodology. Functional aspects. Size and shapes. Support systems. Codal Provisions. Analysis: Stresses and deformations around openings, Stresses and deformations around tunnels and galleries with composite lining due to internal pressure, Closed form solutions, BEM, FEM. Design : Design based on analytical methods; Empirical methods based on RSR, RMR, Q systems; Design based on Rock support interaction analysis; Observational method- NATM, Convergence-confinement method; Design based on Wedge failure and key block analysis. Design of Shafts and hydraulic tunnels. Stability of excavation face and Tunnel portals. Use of appropriate software packages.
CED 760 Minor Project in Rock Engineering Under Ground Structures: 3 credits (0-0-6) CEL 760 Finite Element Method in Geotechnical Engineering: 3 credits (3-0-0)
Introduction. Steps in FEM. Stress-
71
Civil Engineering
chemical process, measures of protection. Ferro-cement, material and properties. Polymers in Civil Engineering Polymers, fibres and composites,Fibre reinforced plastic in sandwich pancels, modeling. Architectural use and aesthetics of composties. Adhesives and sealants. Structural elastomeric bearings and resilient seating. Moisture barriers, Polymer foams and polymers in Building Physics. Polymer concrete composites.
and statistics, Linear programming, Transportation and assignment problems. Dynamic programming, Queuing theory, Decision theory, Games theory. Simulations applied to construction, Modifications and improvement on CPM/PERT techniques.
High rise construction, Bridge construction including segmental construction, incremental construction and push launching techniques, River valiey projects. Safety measures, Quality management, Reliability.
CEP 775 Construction Engineering and Information Technology Laboratory: 3 credits (0-0-6)
Test related to quality control at site, Insitu test methods, Tests related to damage assessment and performance monitoring of structures. Spreadsheet software application in construction management, AUTOCAD, Estimation of project costs, Application of project planning software.
CEL 776 Functional Planning, Building Services and Maintenance Management: 3 credits (3-0-0)
Components of urban forms and their planning. Concepts of neighourhood unit. Street system and layout in a neightourhood. Functional planning of buildings, optimization of space: Spatial Synthesis graphical techniques, heuristic procedures, formulation of linear and non-linear optimization problem. Space requirements and relationships for typical buildings, like residential offices, hospitals, etc. Standard fire, fire resistance, classification of buildings, means of escape, alarms, etc. Engineering services in a building as a systems. Lifts, escalators, cold and hot water systems, waster water systems, and electrical systems. Building Maintenance: Scheduled and contingey maintenance planning. M.I.S. for building maintenance. Maintenance standards. Economic maintenance decisions.
72
Civil Engineering
structural means of thermal control. Moisture control in buildings. Propagation of sound, sound insulation absorption and transmission, reverberation, Design of floor, roofing and walling system for sound absorption and insulation. Design of auditaria Noise control in buildings, Day lighting, Design of fenestration in buildings for day light of various types, illumination design, luminaries and their characteristics, codal requirements.
Factors affecting selection of equipment - technical and economic, construction engineering fundamentals, Analysis of production outputs and costs, Charateristics and performances of equipment for Earth moving, Erection, Material transport, Pile driving, Dewatring, Concrete construction (including batching, mixing, transport, and placement) and Tunneling.
Comparison and evaluation of various models. Simultaneous travel demand models: Parameter Estimation and Validation. Transportation impact study methodologies. Regional analysis and development concepts. Data collection and use of surveys. The role of transportation planning in the overall regional system. Methodology and models for regional transportation system, planning, implementation framework and case studies. Applications to passenger and freight movement in urban and regional contexts. Implications for policy formulations and analysis.
Inventories and Evaluation; Quality Control; Pavement Lifecycle and cost analysis.
Construction accounting, Income statement. Depreciation and amortization. Engineering economics, Time value of money, discounted cash flow, NPV, ROR, PI, Bass of comparison, Incremental rate of return, Benefit-cost analysis, Replacement analysis, Break even analysis. Risks and uncertainties and management decision in capital budgeting. Taxation and inflation. Work pricing, cost elements of contract, bidding and award, revision due to unforeseen causes, escalation. Turnkey activities, Project appraisal and project yield. Working capital management, financial plan and multiple source of finance. International finance, Budgeting and budgetary control, Performance budgeting. appraisal through financial statements, Practical problems and case studies.
Fundamentals of transportation planning. Components of transportation system and their interaction.Historical development and current status of techniques used in travel demand forecasting; Economic Theory of travel demand forecasting; Trip generation, trip distribution, mode choice, traffic assignment. Dimension of the widening role of urban transportation systems planning, the planning process and use, and transport system models.
73
Civil Engineering
Road transport related air pollution, Sources of air pollution, effects of weather conditions, Vehicular emission parameters, pollution standards, measurement and analysis of vehicular emission; Mitigative measures; EIA requirements of Highway projects, procedure; MOEF World Bank/RC/UK guidelines; EIA practices in India.
Operation of batch scale models for various processes : Activated sludge process, Disinfection, Settlers, Coagulation, Filtration, Anaerobic digestion, Adsorption. Design and operation of treatability studies and microbial growth kinetics. Package programmes for water and wastewater conveyance, treatment and disposal.
Municipal Solid Waste : Generation, Rate Variation, Characteristics (Physical, Biological and Chemical); Management Options for Solid Waste, Waste Reduction at the Source, Collection techniques, Materials and Resources Recovery / Recycling. Transport of Municipal Solid Waste, Routing and Scheduling, Treatment, Transformations and Disposal Techniques (Composting, Vermi Composting, Incineration, Refuse Derived fuels, Landfilling). Norms, Rules and Regulations. Economics of the onsite v/s off site waste management options. Integrated waste management.
Water Demands and Sources, Water quality parameters; Epidemiological and toxic aspects. Physical and chemical interactions due to various forces, suspensions and dispersions. Surface and colloidal chemistry. Settling of particles in water, coagulation and flocculation, floatation, filtrationmechanisms and interpretations, ion exchange and adsorption, Chemical oxidation/reduction processes. Disinfection using chlorine, UV, Ozonation. Water stabilization, aeration and gas transfer. Reverse osmosis, Electrodialysis, Desalination. Treatment a sludge management.
74
Civil Engineering
CES 810 Independent Study (Geotechnical & Geoenviron-mental Engineering): 3 credits (0-3-0) CED 811 Major project in Geotechnical and Geoenvironmental Engineering Part I: 6 credits (0-0-12) CED 812 Major Project in Geotechnical and Geoenvironmental Engineering Part II: 12 credits (0-0-24) CEL 817 Structural Safety and Reliability: 3 credits (3-0-0)
Fundamentals of set theory and probability, probability distribution, regression analysis, hypothesis testing. Stochastic process and its moments and distributions, Concepts of safety factors, Safety, reliability and risk analysis, first order and second order reliability methods, simulation based methods, confidence limits and baysean revision of reliability, reliability based design, examples of reliability analysis of structures.
CED 821 Major Project Part-1 (Structural Engineering ): 6 credits (0-0-12) CED 822 Major Project Part-2 (Structural Engineering): 12 credits (0-0-24) CEL 822 Stability Theory in Structural Engineering: 3 credits (3-0-0)
Finite deformation of Structures Elastic buckling of columns; Statical, dynamical and energy-based approaches. Eccentric loading; Nonlinear viscoelastic and elastoplastic buckling; Flexural-torsional and lateral bucking of beams ; Imperfection sensitivity; Post-buckling and Catastrophe theories; Stability of nonconservative structures; Nonlinear dynamical systems theory; Chaos theory; Recent trends in Stability analysis of Steel Concrete and masonry structures.
structures, aeroelastic phenomena, vibration of cable supported bridges and power lines due to wind effects, wind pressure on cooling towers, design of cladding and wind damping devices, Wind tunnel simulations and tornado effects.
75
Civil Engineering
management decision in capital budgeting. Road User Costs; Public Transportation economics; Social Cost of Transportation; project appraisal and project yield. Legal Framework in transport Sector. Financing Transport Infrastructure; Appraisal through financial statements, practical problems and case studies.
CED 872 Major Project Part-2 (Construction Engineering & Management): 12 credits (0-0-24) CES 874 Independent Study (Construction Technology & Management): 3 credits (0-3-0) CED 875 Major Project Part-1 (Construction Technology & Management): 6 credits (0-0-12) CED 876 Major Project Part-2 (Construction Technology & Management): 12 credits (0-0-24) CEL 879 Industrial Waste Management and Audit: 3 credits (3-0-0)
Nature and characteristics of industrial wastes; Prevention versus control of industrial pollution; Linkage between technology and pollution prevention; Tools for clean processes, reuse, recycle, recovery, source reduction, raw material substitution, toxic use reduction and process modifications. Flow sheet analysis; Energy and resource (material and water) audits for efficient usage and conservation; Waste audits, emission inventories and waste management hierarchy for process industries; Environmental performance indicators; Concept of industrial ecology and symbiosis of eco-parks. Case studies of various industries, e.g., dairy, fertilizer, distillery, sugar, pulp and paper, iron and steel, metal plating, refining, thermal power plants.
techniques, linear programming, dynamic programming and integer programming. Integrated management strategies addressing multi-objective planning : Optimization over time. Laboratory Simulation of Environmental Processes, Application of Environmental Databases and Environmental Software Packages, including systems Optimisation.
CES 840 Independent Study (Water Resources Engineering): 3 credits (0-3-0) CED 841 Major Project Part-1 (Water Resources Engineering): 6 credits (0-0-12) CED 842 Major Project Part-2 (Water Resources Engineering): 12 credits (0-0-24) CES 850 Independent Study (Rock Engineering & Underground Structures): 3 credits (0-3-0) CED 851 Major Project Part-1 ( Rock Engineering & Underground Structures): 6 credits (0-0-12) CED 852 Major Project Part-2 (Rock Engineering & Underground Structures): 12 credits (0-0-24) CED 870 Independent Study (Construction Engineering & Management ): 3 credits (0-3-0) CED 871 Major Project Part-1 (Construction Engineering & Management): 6 credits (0-0-12)
CES 890 Independent Study (Environmental Engineering and Management): 3 credits (0-3-0)
Comprehensive review of problems and solutions related to air, water, wastewater, and solid waste management. Identification and evaluation of current and emerging local, regional and global environmental, and socio-economic issues.
CED 881 Major Project Part-1 6 credits (0-0-12) CEL 882 Major Project Part-2 12 credits (0-0-24) CEL 886 Environmental Systems Analysis: 4 credits (3-0-2)
Introduction to natural and man-made systems. Systems modeling as applied to environmental systems. Nature of environmental systems, the model building process, addressing to specific environmental problems. Introduction to Water pollution and transport and atmospheric processes. Strategies for analyzing and using environmental systems models. Application of optimization methods such as search
76
Civil Engineering
CED 891 Major Project Part-1 (Environmental Engineering and Management): 6 credits (0-0-12) CEL 892 Air Quality Modelling: 3 credits (3-0-0)
Introduction to Air Quality Modelling. Approaches to model formulation. Model classification, criteria for model selection. Air pollution meteorology meteorological parameters, stability classification; plume rise; plume behaviour, dispersion parameters. Wind and Pollution rose diagram Basic diffusion equation, deterministic, numerical and statistical modeling approach. Introduction to boundary layer, turbulence physical modeling approach. Stochastic modeling approach to air pollution dispersion. Theory of Gaussian plume model and its application. Introduction to Air Quality Models. Case studies.
CED 892 Major Project Part-2 (Environmental Engineering and Management): 12 credits (0-0-24) CEL 894 Management of Water, Waste and Sanitation Utilities: 3 credits (3-0-0)
Introduction to sustainable management of Water and Sanitation (WATSAN) sector, Development programmes, Feasibility planning. Project Appraisal : Economic, Institutional and Environmental aspects., Institutional & Economical analysis of urban water and sanitation utilities, Contract management, Public-Private Partnerships and related issues. Strategic Management : Change Management, Financial & Marketing Management for water managers, Management, Water quality surveillance programmes. Unaccounted for Water, Customer Service, and Tariff fixation. Case Studies. Globalization and the States Changing Role in Infrastructure Development, the Financial Institutions role in policy making for water management, Concept of Water Markets and the role of National and Federal Governments.
Wetland eco-system including estuaries, tidal marsh lands, swamps, lakes etc.), Forest eco-system (including tropical forests, Himalayan and sub-Himalayan forest eco-system etc.), Desert ecosystem, Coastal shelf eco-system, Temperature and Tundra eco-system, Grasslands etc. Abiotic factors affecting the distribution and productivity of various terrestrial life forms. Leibigs law of minimum. Census techniques, random sampling, various indices of species dominance, richness and abundance, species evenness and diversity. Statistical models, cluster and principal component analysis for similarity studies. Links between diversity and stability. Concept of succession and its use in reclaimation. Facilitation, enablement, Trophic structure, food webs, energy flow diagram, nutrient cycles. Restoration, Reclamation, and Regeneration of Degraded or Degraded or Destroyed Ecosystems.
of Ruth, Kozney-Carman law, Cross flow filtration, Reverse osmosis, Nanofiltration, Ultrafiltration, Microfiltration, Membranes and modules, MF/UF experimental set up, Laws of MF/UF, Limiting Phenomena : Concentration polarization and membrane fouling, Mass transport, and Energy balance. Functioning in closed loop, open loop and with re-circulation. Module arrangement: series or parallel and optimisation. Applications : drinking water, municipal wastewater. Case studies.
CEL 898 Life Cycle Analysis and Design for Environment: 3 credits (3-0-0)
Engineering products and processes : Environmental health and safety, Product life cycle stages, Material toxicity, pollution, and degradation, Environmentally conscious design and manufacturing approaches, Sustainable development and industrial ecology. System life-cycles from cradle to reincarnation, Product life-extension, Organizational issues. Pollution prevention practices, Manufacturing process selection and trade-offs. Design for Environment : Motivation, concerns, definitions, examples, guidelines, methods, and tools. Recyclability assessments, Design for recycling practices. Re-manufacturability assessments, Design for Remanufacture / Reuse practices. Industrial ecology and Eco-industrial parks. Eco-Labels and Life-Cycle analysis (LCA) : LCA methodology, steps, tools and problems, Life-Cycle Accounting and Costing. ISO 14000 Environmental Management Standards. New business paradigms and associated design practices.
CED 895 Major Project (M.S. Research): 40 credits (0-0-80) CEL896 Design of Water and Wastewater Facilities: 3 credits (3-0-0)
Design and analysis of water distribution system, Design and analysis of wastewater conveyance system. Water treatment : Source selection process, selection of treatment chain, plant siting, Treatability studies. Design of physicochemical unit operations : screening, flow measurement and pumping, grit removal, equalisation, sedimentation, floatation, coagulationflocculation, filtration, disinfection. Wastewater Treatment : Design of pretreatment, secondary treatment, and tertiary treatment, disposal systems. Design of processes for nitrogen and phosphorus removal. Sludge stabilization, treatment, sludge thickening, sludge drying, aerobic and anaerobic digestion of sludges. Hydraulics of treatment plants; flow measurement and hydraulic control points, hydraulic profile through the treatment plant.
CEL 897 Membrane Processes for Water and Waste Treatment: 3 credits (3-0-0)
Introduction to membrane separation processes, Membrane filtration, dead end filtration, Cake filtration. Equation
77
78
Randomized algorithms: Use of probabilistic inequalities in analysis, applications using examples. Geometric algorithms: Point location, Convex hulls and Voronoi diagrams, Arrangements. Graph algorithms: Matching and Flows. Approximation algorithms: Use of Linear programming and primal dual, Local search heuristics. Parallel algorithms: Basic techniques for sorting, seraching, merging, list ranking in PRAMs and Interconnection networks.
transform, region based segmentation; Morphological operators; Representation and Description; Features based matching and Bayes classification; Introduction to some computer vision techniques: Imaging geometry, shape from shading, optical flow; Laboratory exercises will emphasize development and evaluation of image processing methods.
CSL 821 Reconfiguration Computing: 3 credits (3-0-0) CSL 830 Distributed Computing: 3 credits (3-0-0)
Models of Distributed Computing; Basic Issues: Causality, Exclusion, Fairness, Independence, Consistency; Specification of Distributed Systems: Transition systems, petri nets, process algebra properties: Safety, Liveness, stability.
CSL 755 Mathematical Foundation of Computer Science: 3 credits (3-0-0) CSL 758 Advanced Algorithms: 3 credits (3-0-0)
Topics from some or all of the following areas: Advanced data structures: selfadjustment, persistence and multidimensional trees.
79
resolution. Natural deduction and the Sequent calculus. Normalization and cut elimination. Lambda-calculus and Combinatory Logic: syntax and operational semantics (beta-eta equivalence), confluence and ChurchRosser property. Introduction to Type theory: The simply-typed lambdacalculus, Intuitionistic type theory. CurryHoward correspondence. Polymorphism, algorithms for polymorphic type inference, Girard and Reynolds System F. Applications: typesystems for programming languages; modules and functors; theorem proving, executable specifications.
shop. Semi definite programming and applications to max-cut, graph coloring. Concept of best possible approximation algorithms, Hardness of approximations.
CSL 858 Advanced Computer Networks: 4 credits (3-0-2) Prerequisite : Permission of the instructor required. Should have done a course or have knowledge equivalent to CS372N or CSL672.
Flow and Congestion Control: Window and Rate Based Schemes, Decbit, TCP, ATM ABR, hop-by-hop schemes. Quality of Service: in ATM, IETF integrated services model, Differentiated Services Model. Flow Identification, Packet Classifiers and Filters. Scheduling.
80
Network Management: ASN, SNMP, CMIP. Issues in the management of large networks. Multicast: IGMP, PIM, DVMRP. Mobility: IP.
areas will be covered: Design and Analysis of Sequential and Parallel Algorithms. Complexity issues, Trends in Computer Science Logic, Quantum Computing and Bioinformatics, Theory of computability. Formal Languages. Semantics and Verification issues.
advanced topics in Database Management Systems in which research is currently going on in the department. These would be announced every time the course is offered.
Rendering: Ray tracing, Radiosity methods, Global illumination models, Shadow generation, Mapping, Antialiasing, Volume rendering, Geometrical Modeling: Parametric surfaces, Implicit surfaces, Meshes, Animation: spline driven, quarternions, articulated structures (forward and inverse kinematics), deformation purely geometric, physically-based, Other advanced topics selected from research papers.
CSL 869 Special Topics in Concurrency: 3 credits (3-0-0) Prerequisite: Permission of the instructor required.
The course will focus on research issues in concurrent, distributed and mobile computations. Some of the following topics will be covered. Models of Concurrent, Distributed and Mobile computation. Process calculi, Event Structures, Petri Nets and labeled transition systems. Implementations of concurrent and mobile, distributed programming languages. Logics and specification models for concurrent and mobile systems. Verification techniques and algorithms for model-checking. Type systems for concurrent/mobile programming languages. Applications of the above models and techniques.
The course will focus on research issues in areas like parallel computation models, parallel algorithms, Parallel Computer architectures and interconnection network, Shared memory parallel architectures and programming with OpenMP and Ptheards, Distributed memory message-passing parallel architectures and programming, portable parallel message-passing programming using MPI. This will also include design and implementation of parallel numerical and non-numerical algorithms for scientific and engineering, and commercial applications. In addition we will study performance evaluation and benchmarking on todays highperformance computers.
CSL 867 Special Topics in High Speed Networks: 3 credits (3-0-0) Prerequisite : Permission of the instructor required.
The course will focus on one or more of the following advanced topics in the area of high speed integrated networks. Traffic management, flow control, advisory control, signaling and quality of service issues. Routing, SOS Routing, Routing in VPS mobility, stability. Wireless Networks: Issues in wireless networks, third generation wireless systems, Media excess control issue, mobility, WAP. Network Management & Performance Analysis Techniques Security issues in modern computer networks, Multimedia communication.
81
meeting the research and development targets set up for the first part. Evaluation will be based on student seminars, written reports, and evaluation of the developed system and/or theories.
82
EED 701 Minor Project (Computer Technology): 2 credits (0-0-4) EEP 701 Digital System Lab: 2 credits (0-0-4)
Students will design, implement and experiment with digital systems. This will include ASIC design, FPGA based design and micro-controller/processor/ DSP based embedded system design and relevant hardware and software development and experimental evaluation and verification.
83
Electrical Engineering
Band, Block Codes and tree for data transmission. Alegebraic codes; Hamming, BCH, Reed-Solomon and Reed-Muller Coes, Algebraic Geometric Codes: Goppa codes and Codes over eliptic curves, signaling with and without bandwidth constraint, combined coding and Modulation: Trellis Coded Modulation (TCM, One and two dimensional modulations for TCM, Multidimensional TCM,Lattice Codes.
84
Electrical Engineering
flitering and MMSE estimates. Linear prediction, Levinson-durbin algorithm and lattice. Filters: Overview of Spectral Estimation Methods. Adaptive Algorithms: 1. LMS Algorithm, Conveargence Analysis, Adaptive Noise Cancellar; 2. Least Squares Algorithm: General Weighted Least Squares Methods, Recursive Least Squares Algorithm,Fast Least Squares Algorithm for AR modelling case. Special Topics.
EEP 725 Control Laboratory: 3 credits (0-0-6) EEL 731 Digital Signal Processing: 3 credits (3-0-0)
Discrete time signals and systems Ztransforms. Structures for digital filters. Designs procedures for FIR and IIR Filters. Frequency Transformations : Linear phase design. Introduction to DFT. Errors in digital filtering. Hardware implementation considerations.
EES 720 Independent Study (Control & Automation): 3 credits (0-3-0) EEL 721 Linear System Theory: 3 credits (3-0-0)
Review of matrices and linear vector space including semigroup, group, rings and fields, state variable modelling of continuous and discrete time systems, linearization of state equations, solution of state equations of linear time-invariant and time-varying systems.Controllability and observability of dynamical systems. Minimal realization of linear systems and canonical forms. Liapunovs stability theory for linear dynamical systems.
85
Electrical Engineering
EEL 743 Power Electronics Devices and D.C. Converters: 3 credits (3-0-0)
Review of power switching devices, i.e., Thyristors, GTO, MOSFETS, BJT, IGBT and MCTS. Trigger techniques, optical isolators, protection circuits, isolation transformers. Natural and forced commutation of SCRS, phase-controlled rectifier configurations. Control of output voltage by sequence and sector control. Reduction of harmonic using multiplepulse control. Design of rectifier circuits. Comparative aspects of design using converter transformers-forced and sell turn off devices. choppersstep down and step up configurations. Design of chopper circuits. Reduction of harmonics. Introduction to multiphase
EEL 746 Non-conventional Energy Sources and Energy Converters: 3 credits (3-0-0)
Review of various energy sources. Importance of unconventional sources such as solar, biogas, wind, tidal etc. Study of typical energy converters such as high performance motors, special generators driven by biogas engines, wind turbines etc. Mini-hydro generators. Modern state-of-the art and futuristic systems in this area.
86
Electrical Engineering
radiation. Introduction to various antenna typeswire, loop and helix antennas, analysis using assumed current distribution. Aperture antennas : slot, waveguide, horn, reflector and printed antennas. Analysis using field equivalence principle and Fourier transform methods. Linear arrays. Broadband antennas. Antenna measurements.
trellis codes. Spread-spectrum modulation : Pseudonoise sequences. Direct-sequence and frequency-Hop spread spectrum, Signal-space dimensionality and processing gain. Data networks : Communication networks. Circuit switching. Store-and-forward switching. Layered architecture. Packet networks and multiple-access communication.
Description of sources of noise. Reverberation. Probability correlation analysis. Spectral analysis. Review of active/passive sonar system concepts. Basic design consi- derations. Review of spatial and temporal processors for search and track applications for active/passive sonars. Sonar displays. Physics of CRT displays. Psycho-physical aspects. Display format and detection criteria. Modern software format display. Miscellaneous sonar concepts including frequency scanning side scan, parametric array, coastal surveillance systems.
EEL 763 Monolithic Microwave Integrated Circuits & Technology: 3 credits (3-0-0)
History of Monolithic Microwave Integrated circuits. Monolighic circuit components Planar Transmission Lines, Lumped and Distributed Passive Elements,GaAs MESFET. Other active devices. Metal semi-conductor functions and their characterisation. Physical and Modelling of GaAs MESFET & HEMT. Material and fabrication techniques of GaAs MESFET. Properties of GAAs.Electron beam and X-ray lithography.Plasma asisted deposition. Molecular beam epitaxy & MOCVD.Ion milling. S-parameter measurements and their use in GaAs MESFET. S-parameter measurements: General Concept. Measurement of S-parameters of Active Devices.On wafer S-parameaters of Active Devices.On wafer S-parameter measurements; utilisation of. S-parameters in circuit Design. Gaas Mesfet Circuit Design. Amplifiers (Narrow band/Board band) Oscillators, Misers, Active & Passive Phase shifters. Monolithic Microwave Integrated circuit process. Optical Control of MMICs.
Hypothesis testing Bayes, Minimax and Neyman-Pearson criteria. Types of estimates and error bounds. General Gaussian problem. Detection and estimation in coloured noise. Elements sequential and non-parametric detection. Wiener-Hopf and Kalman filtering. Applications to communication, radar and sonar systems.
87
Electrical Engineering
random processes. Wieners theory of optimization. Application of Wieners theory in the compensator design for feedback control systems. Gauss Markov model for vector random processes. Kalman filtering and prediction for discrete time and continuous time systems. Minimum variance control.
EEP 788 IC Processing Lab: 3 credits (0-0-6) EEP 790 Advanced Electrical Laboratory: 3 credits (0-1-4)
Simulation techniques and Computer program development for Power System
88
Electrical Engineering
Studies like Load flow ,Short circuit and Stability analysis. Application of commercially available software packages like Matlab, EMTDC, P-Spice for Power system studies.
Equivalent circuit representations. Lumped and distributed circuit transients. Line energisation and de-energisation transients. Earth and earthwire effects. Current chopping in circuit breakers. Short line fault condition and its relation to circuit breaker duty. Trapped charge effects. Effect of source and source representation in short line fault studies. Control of transients. Lightning phenomena. Influence of tower footing resistance and earth resistance. Travelling waves in distributed parameter multiconductor lines, parameters as a function of frequency. Simulation of surge diverters in transient analysis. Influence of pole-opening and pole recolsing. Fourier integral and Z transform methods in power system transients. Bergeron methods of analysis and the use of the EMTP package. Insulation Co-ordination : Overvoltage limiting devices, dielectric properties, breakdown of gaseous insulation, tracking and erosion of insulation, high current arcs, metallic contacts.
EED 790 Minor Project: 3 credits (0-0-6) EEL 790 Optoelectronic Instrumen-tation: 3 credits (3-0-0)
Introduction to test and measuring instruments, instrumentation amplifier, analog signal processing: active filter, A/D, D/A converters, sample & hold, multiplexer, peak detector, zero crossing detector etc., digital design: PALs, FPGA, signal analyser: superheterodyne spectrum analyzer, DFT and FFT analyzer, digital filters and computer interface, microcontrollers: introduction to microcontroller and applications such as 8031, Optoelectronic circuits : circuit design for LD transmitter and PIN receiver, OTDR, optical spectrum analyzer, sensors : fiber optic and radiation sensors, their noise and error analysis, applications in physical sensors, chopper stablised amplifier.
governors, loads. Modelling of singlemachine-infinite bus system. Mathematical modelling of multimachine system. Dynamic and transient stability analysis of single machine and multimachine systems. Power system stabilizer design for multimachine systems. Dynamic equi-valencing. Voltage stability Techniques for the improvement of stability. Direct method of transient stability analysis: Transient energy function approach.
EEP 798 Power System Lab. II: 2 credits (0-0-4) EEL 799 Power System Reliability: 3 credits (3-0-0)
Basic Probability Theory : Review of probability concepts. Probability distributions. Application of binomial distribution to engineering problems. Probability distribution in reliability evaluation. Network modelling and evaluation of simple and complex systems. System reliability evaluation using probability distributions. Frequency and duration techniques. Generation System Reliability Evaluation : Concept of LOLP and E(DNS) : Evaluation of these indices for isolated systems. Generation system. Reliability analysis using the frequency and duration techniques. Transmission System Reliability Evaluation: Evaluation of the LOLP and E(DNS) indices for an isolated transmission system. Distribution System Reliability Evaluation: Reliability analysis of radial systems with perfect and imperfect switching.
EEP 791 Power System Lab.I: 2 credits (0-0-4) EEL 791 Power System Analysis : 3 credits (3-0-0)
Algorithms for formation of bus admittance and impedance matrices. Power flow solutions : Gauss Seidel, Newton Raphson, Fast decoupled power flow. Short circuit studies. Sparsity exploitation in power system studies. Static equivalents for power systems. Concepts of security states and security analysis in power systems. State estimation in power systems, Voltage stability analysis.
EES 800 Independent Study (Computer Technology): 3 credits (0-3-0) EED 801 Major Project Part-1 (Computer Technology): 6 credits (0-0-12) EED 802Major Project Part-2 (Computer Technology): 12 credits (0-0-24) EEL 802 Testing and Fault Tolerance: 3 credits (3-0-0)
Physical Faults and their Modelling; Stuck-at Faults, Bridging Faults; Fault Collapsing; Fault Simulation : Deductive,
89
Electrical Engineering
Parallel, and Concurrent Fault Simulation; Critical :Path Tracing; ATPG for Combinational Circuits : D-Algorithm, Boolean Differences, Podem; Random, Deterministic and Weighted Random Test Pattern Generation; Aliasing and its Effect on Fault Coverage; PLA Testing, Cross Point Fault Model and Test Generation; Memory Testing Permanent Intermittent and Pattern Sensitive Faults, Marching Tests; Delay Faults; ATPG for Sequential Circuits : Time Frame Expansion; Controllability and Observability Scan Design, BILBO, Boundary Scan for Board Level Testing; BIST and Totally Self checking Circuits; System level Diagnosis; introduction; Concept of Redundancy, Spatial Redundancy, Time Redundancy, Error Correction Codes; Reconfiguration Techniques; Yield Modelling, Reliability and effective area utilization.
EEL 813 Selected Topics I: 3 credits (3-0-0) EEL 814 Selected Topics II: 3 credits (3-0-0) EEL 817 Access Network: 3 credits (3-0-0)
The access loop, wired and wireless access, radio access, optical access networks, PONs, access standards, V5.x standards, service provisioning and inter-networking.
EEL 831 Digital Signal Processing-II: 3 credits (3-0-0) Prerequisite : Digital Signal Processing I
Methods for fast computation of DFT including FFT, NTT and WTFA. Noise analysis of digital filters. Power spectrum estimation. Multi-rate digital filtering: Introduction to multidimensional DSP. Examples of applications of DSP in communications. Radar and Sonar.
Use of Computer Graphics and Image Processing for Scientific Visualisation. Introduction to numerical modelling techniques: Element band discretization. Scalar field visualisation, flow visualisation, volume display techniques. Animation. Visualisation System Design. Use of multimedia and virtual reality.
EED 820 Minor Project (Control and Automation) EEL 823 Discrete Time Systems: 3 credits (3-0-0)
Introduction to discrete time systems. Time domain representation. Ztransformation. Analysis of discrete time systems; time domain approach and Zdomain approach. State variable representation, analytical design of discrete system, engineering characteristics of computer control systems, elements of hybrid computer, digital and hybrid simulation of sampled data systems.
Hardware description Languages; Verifying behaviour prior to system construction simulation and logic verification; Logic synthesis PLA based synthesis and multilevel logic synthesis; Logic optimization; Logic Simulation Compiled and Event Simulators; Relative Advantages and Disadvantages; Layout Algorithms Circuit partitioning, placement, and routing algorithms; Design rule verification; Circuit Compaction; Circuit extraction and post-layout simulation; Automatic Test ProgramGeneration; Combinational testing D Algorithm and PODEM algorithm; Scan-based testing of sequential circuits.
EES 810 Independent Study (Communications Engineering): 3 credits (0-3-0) EEL 811 Miscellaneous Underwater Systems: 3 credits (3-0-0)
Echo sounder. Underwater communication. Underwater measuring instruments/calibration.Remote controlled submersibles. Acoustic holography. Low light television. Sonobuoys and underwater weapon control.
EEL 833 Selected Topics in I.E.C.: 3 credits (3-0-0) EEL 834 VLSI Design: 3 credits (3-0-0)
Relationship between design of ICs, technology and device models. NMOS,CMOS, BiCMOS Process sequences and silicon foundryconcepts. Symbolic representations. Array and other design approaches. Topics in design-yield and redundancy, Low Power design. Testability and fault tolerance. Cell library formation. Design automation. Hardware description languages,Current Topics.
EEP 835 I.E.C. Project Laboratory: 3 credits (0-0-6) EEL 836 Biomedical Electronics: 3 credits (3-0-0)
EEL 829 Selected Topics in Advanced Control & System Theory-I: 3 credits (3-0-0) EED 830 Minor Project (Integrated Electronics & Circuits): 3 credits (0-0-6)
The need to study biological instrumentation; biological amplifiers and their interfacing with electrodes for activity monitoring solid state transducers for pressure flow, temperature and other physiological parameters and related instrumentation for long-term use. Low
90
Electrical Engineering
power consuming circuits especially for implantable pacemakers; drift problem and its compensation, telemetry of biological signals. Digital signal processing and imageryconstruction suitable for scanning, for example, CAT, PET, NMR and ultrasonics with a special reference to instrumentation principles. Biomedical applications of thin film and thick film technologies and fibre optics. Microminiaturisation for rehabilitation instrumentation.
condenser), SMPS: analysis, design and control, UPS: on-line and off-line, power supplies in telecommunication systems, High frequency induction heating, Dielectric heating, Power supplies in automobiles. Passive filters, active filters for harmonic and reactive power compensation in two wire,three wire and four wire ac systems. Harmonic standards, power quality, surge supressors, compensation of arc furnace and traction loads. Microwave ovens, light and temprature controllers, power supplies for appliances such as camera, X-Ray equipments. Case studies on microcomputer and DSP control in active filters and power supplies.
Special induction generators and control. Servo motors, special duty motors. Special electrical machines associated with wind, solar, tidal, wave, micro hydal and other non-conventional energy sources.
EES 837 Independent Study (Integrated Electronics & Circuits): 3 credits (0-3-0) EET 841 Industrial Training and Seminar: 3 credits( 3-0-0) EEL 841 Solid State Controllers of Drives: 3 credits (3-0-0)
EED 842 Major Project Part-1 (Power Electronics, Electrical Machines & Drives): 6 credits (0-0-12) EED 843 Major Project Part-2 (Power Electronics , Electrical Machines & Drives): 12 credits (0-0-24) EEP 843 Electric Drives Laboratory: 1.5 credits (0-0-3)
Basic design methodology and engineering considerations. Properties of electric, magnetic and insulating materials. Choice of materials, frames etc. Computerisation of design procedures. Optimisation techniques and their application to design problems. Design of large and h.p. motors. Database and knowledge based expert systems. Development of PC based software.
EEL 847 Selected Topics in Machines & Drives: 3 credits (3-0-0) EEL 851 Special Topics in Computers I: 3 credits (3-0-0)
Topics of current interest.
ROM based control of converters, such as rectifiers, choppers, inverters, cyclocon-verters. Use of PLL for speed control. Basic microprocessor system for speed control of drives. Field oriented control and programmable controllers. VSI and CSI converter with PWM technique for implementation of the field oriented control. Energy saving drive system, transfer function of converter controlled drive and analysis. Switched Reluctance Motor Drive, Permanent Magnet Brushless Motor Drives, Synchronous Reluctance Motor Drives, Sensorless Control, Direct Torque Control, Direct and Indirect Vector Control, CLM Drives, Power Quality Improvements in Drives.
Advanced experiments on drive systems and their control, converter fed d.c. drives. Inverter fed a.c. drives. Computer control of drives.
EEL 843 Computer Aided Simulation & Design of Power Electronics systems: 3 credits (3-0-0) EEL 844 Advanced or Selected Topics in Power Electronics: 3 credits (3-0-0)
EES 841 Independent Study (Power Electronics, Electrical Machines & Drives): 3 credits (0-3-0) EEP 841 Electrical Machines Lab: 1.5 credits (0-0-3) EED 841 Minor Project: 3 credits (0-0-6) EEP 842 Power Electronics Lab: 1.5 credits (0-0-3)
Advanced topics in power electronics. Analysis and design of power electronic circuits.
Introduction: what are agents? Motivating Applications Agent Architecture. Multi-agent Systems and Agent Societies Distributed Problem Solving and Planning Search Algorithms Distributed Rational Decisions Making Probabilistic Reasoning Implementing Agent Systems Development Environments Programming issues Mobility and Security Applications Information Retrieval, E-Commerce, Industrial Control, Telecommuni-cation System
Experiments in familiarization of microprocessors and microcomputers. Use of personal computers (PC) programming techniques. Software development on PC for typical drive problems. Machine interfacing with PC.
Principles, stages, specification formalisms (UML, SDL, ASN.1) of telecom protocol design, protocol software development process, computer aided protocol engineering, verification and testing of protocols, object orienterd techniques in protocol development.
Concepts of non-linear loads and electric power conditioning, unity power factor ractifier, STATCON, (static
Linear induction motors and actuators. Permanent magnet motors. Disc motors, stepper motors: brushless motors. High performance energy efficient machines.
Introduction to the basics of networks, introduction to the Internet, comparison of Internet architectures, network applications, encryption, e-commerce,
91
Electrical Engineering
EEL 861 Selected Topics in Communication Engineering I: 3 credits (3-0-0) EED 861 Major Project Part1 (Communications Engineering) : 6 credits (0-0-12) EED 862 Major Project Part2 (Communications Engineering) : 12 credits (0-0-24) EEL 862 Selected Topics in Communication Engineering II: 3 credits (3-0-0) EEL 863 Selected Topics in Communication Engineering III: 3 credits (3-0-0) EEL 864 Modern Antennas and Arrays: 3 credits (3-0-0)
Practical topics in network security and cryptography, cryptographic protocols, inter-networking security mechanisms, private and public key encryption, IPSEC-Internet Protocol security architecture.
Real-time operation systems, objectoriented design for exbedded systemsUML, Petrinet based program development, real-time protocol stack design, real-time programming, lightweight wireless protocols/Bluetooth.
channels (dispersive only in time, only in frequency, doubly dispersive). Modulation and demodulation : Optimum receiver principles, structure of modulators and demodulators. Combining techniques. General principles of linear combining, selection combining, maximal ratio combining and equal gain combining. Decision oriented diversity, optimum combining. Coding for fading channels. Trivial repetitive coding, Interleaved coding, dual-k convolutional codes and trellis codes for fading channels. Performance evaluation. Random coding bound for coded systems, probability of error, bandwidth and complexity. Performance of linear combining systems. Examples of fading channels : Discussion on mobile communication channels and troposcatter channels.
Specification and implementation of the alternating-bit protocol in SDL ATMSignaling Protocaols Hand-over in GSM radio mobile network, Data transmission with GSM in the non-transparent mode, Protocol analysis of data transmission via Ethernet LAN, Development of voice based services for intelligent networks, Planning and evaluation of DECT systems.
Printed antennas. Arrays : pattern synthesis, planar arrays, ph ased arrays. Diffraction theory : paraboloidal reflector antenna, different feed configurations, shaped beam antennas. Millimetre wave antennas. Dielectric rod, lens, Fresnelzone antenna, quasi-optical antennas. Antennas for biomedical application.
Review of Fourier optics, coherent and incoherent imaging transfer functions, equivalence of optical and electrical systems, spatial filtering, holographic data processing, optical memories, application to synthetic aperture radar and biological signal processing. Hybrid opto-digital signal processing.
Overview of mobile computing, wireless and mobile computation SS7 and GSM, mobile IP, wireless mobile ATM, multicast routing protocols, location management, mobile agents, mobility management.
EEP 874 Project Laboratory: 3 credits (0-1-6) EED 875 Major Project Part-1 (Control & Automation): 6 credits (0-0-12) EED 876 Major Project Part-2 (Control & Automation): 12 credits (0-0-24) EEL 878 Artificial Intelligence in Control Applications: 3 credits (3-0-0)
Network planning, network initialisation and configuration management, fault management, usage accounting, and security. Current network and management products. Development of network management systems and the role played by network management protocols and products.
Frequency bands and allocations. Earth and its effects on propagation. Atmosphere and its effects on propagation. Attenuation of millimetre waves. Line-of-sight communication links: system configuration, multiplexing, link design. Troposcatter propagation and links: Fading and diversity reception, path profile and path loss, link design, signal design for fading channels.
EEL 866 Microwave Solid State Devices and Circuits: 3 credits (3-0-0)
Cellular Concept. Mobile Radio Propagation. Cochannel Interference. Modulation Techniques. Diversity. Channel Coding. Multiple Access. Cellular Coverage Planning. Wireless Networking. Wireless Systems and Standards.
Two terminal devices and circuits : Junction diodesPIN, Schottky, Varactor, tunnel diodes. Design and analysis of switches, limiters, phase shifters, modulators, harmonic generators and parametric amplifiers. Transferred Electron DevicesGunn, LSA. Avalanche Transit Time Devices Impatt, Trapatt and their circuits. Bipolars, JFET and MESFET. Design of oscillators and amplifiers.
An overview of the filed of Artificial Intelligence. Neural Networks : Fundamentals, Backpropagation model, Other models, control Applications. Genetic Algorithms and Evolutionary Computing : Optimization Examples. Fuzzy Systems : Fundamentals; Fuzzy Control; Hybrid Systems. Rough Sets : Basics; Knowledge Extraction from Data; Control Applications. Chaos; Applications.
EEL 879 Selected Topics in Advanced Control & Systems Theory-II: 3 credits (3-0-0) EEL 881 Issues in Deep Submicro CMOS IC Design: 3 credits (3-0-0)
Fading channel models and characterization: Scatter model. Scattering function. Classification of
92
Electrical Engineering
EED 890 Major Project Part-1 (Power Systems): 6 credits (0-0-12) EEL 891 Selected Topics in Power System: 3 credits (3-0-0) EEL 892 Power System Communication: 3 credits (3-0-0)
Introduction. Communication links required for telemetry, telecontrol and teleprotection. Analog and Digital Communication-Speed and bandwidth requirements-Noise in power systems. Communication links PLCC, microwave, telephone line, satellite, fibre optic. Requirements of various communication equipments used in power systems. Computer networking in power system.
EES893 Independent Study (Power Systems): 3 credits (0-3-0) EEL 894 Flexible A.C. Transmission Systems: 3 credits (3-0-0)
The phenomenon of voltage collapse; the basic theory of line compensation. Static excitation systems; static VAR compensators; static phase shifters; thyristor controlled series capacitors. Co-ordination of FACTS devices with HVDC links. The FACTS optimisation problem Transient and dynamic stability enhancement using FACTS components. Advanced FACTS devices-the STATCON and the unified power flow controller.
EED 888 Major Project Part-1 (Integrated Electronics & Circuits): 6 credits (0-0-12) EED 889 Major Project Part-2 (Integrated Electronics & Circuits): 12 credits (0-0-24) EEL 890 Photonic Switching and Networking: 3 credits (3-0-0)
Photonic Switching: Switching architectures-single and multistage switching, space switching, time switching, combinations of space and time switching, interconnection networks; Networks: Introduction to computer data networks, ISO-OSI models, SDH, SONET; Fiber-optic LAN architectures and protocols- ring, star and bus architectures, DQDB, FDDI; High speed bus protocols- RATO-net, WDM networks- LAMBDA-net, coherent star, PASS-net, shuffle-net.
EED 898 Major Project Part2 (Power Systems): 12 credits (0-0-24) EEL 899 Distribution Automation: 3 Credits (3-0-0)
Introduction to distribution automation, configuration of distribution system. Nature of loads and load forecasting. Layout of substations and feeders. Design considerations. Distribution system load flow. Optimum siting and sizing of substations, optimum capacitor placement. Distribution system monitoring and control : SCADA, Remote metering and load control strategies, Optimum feeder switching for loss minimization and load control. Distribution system restoration. Distribution system protection and switchgear. Power quality issues.
93
94
comprehensive and systematic understanding of urban social systems. Students completing this course will have a detailed knowledge of urbangrowth and urban behaviour analysis, and urban- planning through a feedback analysis approach. Following will be the main course contents: Nature, types and growth of cities, Some important aspects of urban-systems: migration; neighbourhood; social groups; and voluntary associations. Trend of urbanisation. Urban influences on rural areas. A profile of urban India and its problems. Solution of the problems through various approaches. Urban planning.
of industrialisation in India. Role of public and private sectors. Growth of smallscale industries and their problems. Government regulation of industry. Balanced regional development.
95
philosophy as conversation and social conduct; (F) the writings of continental non-analytic philosophers such as Derrida and Habermas who hold such opposed positions on the nature of language. The views of Kripke, Dummett and Dennett among philosophers and Chomsky, Katz and Fodor among linguists will also be discussed. The course may have a seminar format in which particular tonics are considered in depth and short papers are prepared by students.
schools of critical theory : Platonic, Aristotelian, Renaissance, Romantic, Formalist, Structuralist, Poststructuralist, Deconstructionist and Feminist. Since the material is vast, only three or four topics will be studied in a semester.
HUL 882 The European Renaissance, Selfhood and Survival: 3 credits (3-0-0)
This course will cover drama, prose, and poetry from one of the richest periods of European Literature : the Renaissance. It will relate the production of a work of art to Renaissance history and cultural politics. Tests by Pico, More, Machiavelli, Sidney, Spenser and Shakespeare and others will be examined from the point-of-view of selfhood and survival.
96
DEPARTMENT OF MATHEMATICS
The Department of Mathematics offers a postgraduate programme leading to the degree of M.Sc. (Mathematics), the details of which are given separately in the Publication under the chapter M.Sc. Programmes. It also participates in the Interdisciplinary M.Tech. Programme in Computer Applications. The Department offers the following prePh.D. courses : and its computational complexity: Karmarkars projective scaling algorithm. Unconstrained optimization: basic descent methods, conjugate direction methods and quasi-Newton methods. Constrained optimization: primal methods, penalty and barrier methods, cutting plane and dual methods. Parallel algorithms for numerical optimization. Optimization and Neural Networks.
MAL 714 Finite Element Techniques and Computer Implementation: 3 credits (3-0-0)
Finite element formulations of different
97
Mathematics
boundary value problems of elliptic PDEs. Element topology generation on computers: triangulation of domains, semi-automatic and automatic mesh generation. Different finite elements : affine and isoparametric elements. Numerical integration on triangles and rectangles. Element stiffness matrices for different elements. Different schemes of assembly and computer storage of global stiffness matrix. Computer programs for equation solvers; frontal technique and its computer implementation. Solution of a twodimensional model problem.
flows, stream functions and vorticity equations, conservative form, normalising systems, transport equations. Methods for solving vorticity transport equations, stability analysis : one-step explicit methods, implicit methods, multistep explicit methods, ADI methods, ADE methods. Transporative and conservative differencing. Methods for solving stream function equations : direct methods, Richardsons methods and Leihmans methods. SOR method. Fourier series method. Numerical treatment of boundary conditions for the vorticity and stream function equation. Basic computational methods of compressible flows, methods using explicit and implicit artificial viscosities. Programming, testing and information processing of numerical methods.
98
Mathematics
inaccuracy, uncertainty and imprecision in representation of a knowledge-base. Deduction and computation : the inference systems, arities, sorts and many-sorted algebras, polymorphisms. The categorical formulation. Confluence and termination, Knuth-Benedix method. The Church- Rosser property and sequential computation. Logic programming, PROLOG and other logic programming languages. Functional programming.
Random number generation tests for randomness, random variate generation, rejection principle, composition, variance reduction techniques, simulation from multivariate distributions. Analysis of simulation with general purpose languages. A minor application.
concepts. Solvable and Nilpotent Lie algebras, The Engels theorem, Lies theorem, Cartans criterion, Killing form, Finite dimensional semi-simple Lie algebras and their representation theory. The Weyls theorem. Representations of sl (2,C). Root space decomposition. Rationality properties. Root systems, The Weyl group. Isomorphism and conjugacy theorems (Cartan subalgebras, Borel subalgebras). Universal enveloping algebras, PBW theorem, Serres theorem. Representation theory and characters. Formulas of Weyl, Kostant and Steinberg. Introduction to infinite dimensional Lie algebras.
MAL 823 Special Topics in Computer Applications: 3 credits (3-0-0) MAL 851 Applied Numerical Analysis: 3 credits (3-0-0)
Error analysis and stability of algorithms. Nonlinear equations: Newton Raphson method, Mullers method, criterion for acceptance of a root, system of non-linear equations. Roots of polynomial equations. Linear system of algebraic equations : Gauss elimination method, LU-decomposition method; matrix inversion, iterative methods, illconditioned systems. Eigenvalue problems : Jacobi, Givens and Householders methods for symmetric matrices, Rutishauser method for general matrices, Power and inverse power methods. Interpolation and approximation : Newtons, Lagrange and Hermite interpolating polynomials, cubic splines; least square and minimax approximations. Numerical differentiation and integration: Newton-Cotes and Gaussian type quadrature methods. Ordinary differential equations : Initial value problems: single step and multistep methods, stability and their convergence. Boundary value problems: Shooting and difference methods. Partial Differential Equations : Difference methods for solution of parabolic and hyperbolic equations in one and twospace dimensions, stability and their convergence, difference methods for elliptic equations.
MAL 855 Multiple Decision Procedures in Ranking and Selection: 3 credits (3-0-0)
The problem of ranking and selection, different approaches to the solution of problem. Indifference zone formulation : Ranking normal population in terms of means single and two stage procedures. Ranking normal population in terms of variances. Ranking binomial population-fixed sample size and multistage procedures, play the winner rules and vector at a time sampling. Ranking Gamma population with largest (smallest) scale parameter. Optimal properties of fixed subset size proceduresBayes, minimax and admissibilities properties, subset selection formulation : Decision theoretical formulation, best invariant rules. Restricted subset selection. Subset selection of normal population w.r.t. means and variances, selection of t-best. Subset selection in binomial and gamma populations. Comparison of population with a control. Normal and exponential populations.
99
Mathematics
problems on unbounded domains in IRn (n=2,3). Fundamental solution of elliptic equations. Simple layer and double layer potentials Fredholm integral equations of first and second kinds. Singular and hypersingular kernels. Interior and exterior Dirichlet problems and integral representations of their solutions. Variational formulation of problems defined on boundary. Solution of some model problems by boundary element methods, approximate integrations over boundary, solution methods of algebraic equations; computer implementation of boundary element methods for a model problem. Coupling of boundary element
and finite element methods. Some advanced topics of boundary integral methods integrals with hypersingular kernel, a method of elimination of singularity, Lagrange multiplier method.
MAL 888 Boundary Elements Methods with Computer Implementation: 3 credits (3-0-0)
Distributions and Sobolev spaces of fractional order. Elliptic boundary value
100
MEP 601 Introduction to Computers and Programming: (Non-credit Audit) 2 credits (0-0-4)
Operating system and system software. Application software. Hardwarecontroller software, drivers. Viruses and other system control programs. Hardware problems and trouble shooting; Computer networks and connectivity. Introduction to institute computing facilities and department computer resources.Introduction to Windows, Windows-NT and Linux/Unix environments. Concepts of programming: flow-charting, pseudocoding, coding, entry, compilation, debugging and testing. Modularity and program structure. Syntax rules of C/C++/JAVA languages. Simple program tutorials. Introduction to compilers available in department and institute. Preparing user and programmer manuals. Office Software: Word processing, spreadsheets, presentations. Mathematical Software. Modeling and drafting software. Data acquisition softwares. Specialist softwares: property tables, CFD, FEM. Post-processing and plotting softwares.
101
Mechanical Engineering using knowledge of PG core and elective courses, and design and production engineering courses; use of codes and standards; preparation of engineering drawings; process planning; manufacturing, assembly, testing, and as possible, testing to failure, and failure analysis; documentation. Control theory fundamentals: Steady state and transient response, Stability analysis Routh and Nyquist criteria, Root locus method. Sequence and programmable logic controllers. Hydraulic, pneumatic and electrical systems. Laboratory: Calibration. Experiments related to heat transfer, fluid mechanics, thermodynamics and gas dynamics. Project on experiment design including drawings, wiring diagrams, selection of instruments and computer interfacing. Use of various controllers and actuators. Data management and presentation. from I.C. engines, power plants, domestic and other sources. Meteorology and dispersion of polutants, instruments for pollutant measurement and monitoring. Legislation and emission standards.
102
Mechanical Engineering
MEL 714 Thermal and Nuclear Steam Power Plants: 4 credits (3-0-2)
Recapitulation: types of power plants, cycles, site and equipment selection, feasibility studies. Fuels and combustion. Fuel and air handling equipment. Steam generators, supercritical and LEBS. Nuclear power plantsreaction physics, type and sizing of reactors and steam generators. Turbines, feedwater heaters, condensers, deaerationsizing and performance calculations. Cooling water systemssizing and load calculations. Cogeneration systemstypes and sizing. Control and instrumentation. Environmental and safety aspects. Operation, performance and condition monitoring. Future trends.
Introduction. Environmental impact of refrigerants. Analysis of VCR cycles multistage, multievaporator, cascade systems, supercritical and other advanced cycles. Properties and selection of pure and mixed refrigerants. Properties of binary mixtures. Analysis of vapor absorption cyclesAqua ammonia and LiBr water cycles. Air cycle refrigeration, vortex tube, steam jet ejector refrigeration, thermoelectric refrigeration, cryogenics, desiccant coolingsolid and liquid systems, hybrid systems, heat pumps and heat transformers.
components, fouling and corrosion, draft system (air and flue gas) design, boiler controls. Mechanical design of pressure parts, heat recovery boiler -design, water quality and its control, case studies.
Review of various ideal cyclesRankine and Braytonand fuel-air cycles. Thermodynamics optimization of design parameters. Real cycle effectsinternal and external irreversibilitites, pressure drops, heat loss, condenser air leakage, fouling of heat transfer surfaces, combustion lossesand their impact on the thermodynamic cycle. Optimization of real and double reheat cycles. Analysis of off-design performance. Combined cyclesideal and real cycles thermodynamic analysis. Design of alternate schemes for combined cycles single, dual and triple pressure cycles, and their optimization. Retrofit of ageing power plants. Parametric analysis effects of gas and steam cycle variables. Binary vapour and Kalina cycles. Thermochemical and H 2-O 2 cycles. Cycles for nuclear power plants (PWR, BWR, PHWR, FBR). All simulations will involve extensive use of numerical techniques as part of laboratory work.
MEL 713 Design of I.C. Engine Components and Sub-systems: 4 credits (3-0-2)
Introduction to different types of I.C. engine systems. Engine design and operating parameters. Fuels for engines and their characteristics. Fuel-air mixing, gas exchange, combustion. Fuel injection systems. Ignition and combustion. Combustion chamber designs for spark-ignition and compression-ignition engines. Engine cooling and cooling system design. Engine lubrication systems. Emission control and electronic management systems. Design of supercharged engines. Testing and performance of I.C. engines.
103
Mechanical Engineering Indexes of merit; Graphical, Algebraic and Optimization techniques; Design of function, path, and motion generators; Dynamic considerations, Rigid body dynamics, Newton-Euler formulation, Equations of motion; Methodologies for inverse and forward dynamics. Practicals will include numerical problem solutions; Basic practices in MATLAB, ADAMS and ULTRAGRIP software; Analysis and Synthesis using software. Vibration control solutions. Balancing of rotating and reciprocating machines. Design of vibration isolators. Auxiliary mass systems including tuned dampers for vibration control. Application of damping treatment for vibration control in machines and structures. Dynamic instability control. Introduction to Modal testing, model updating and structural dynamic modification to improve dynamic design of machine structures. Active control of vibrations. Introduction to NVH and its control. analysis of mechanical components; FEA using 2D and 3D elements; Plain strain and plain stress problems, FE using plates / shell elements; Importance of Finite element mesh, Automatic meshing techniques; Interfacing with CAD oftware, Case studies using FEM for Design of simple element geometries such as a tapered bar, a plate with a hole and a spanner; Introduction to Dynamic analysis; Limitations of FEM, Introduction to Nonlinear problems and FEA for plastic materials. Practicals:Practice of transformation. Use of CAD Package for developing typical objects using Boolean, and sweep operations on primitives, use of CAD models for other applcations. Development of FEM models for Static / Dynamic analysis of a bar, beam and a shaft. Practice in using an FEM Software on other real life problems like spanners, connecting rods etc.
104
Mechanical Engineering
Signal and systems analysis. FFT analysers. Current developments in measurement and control of motion, force, torque, pressure, temperature, flow, noise etc. Virtual instrumentation, Laser Based intrumentation.
Practicals:
Static and dynamic Behaviour of some important trnsduceers, calibration procedure, Development of Computer aided experimentation systems. Experimental studies on Hydraulic, Pnumatic, Electrical controller, Electromechanical actuators.
105
Mechanical Engineering methods. Optimising product design functionality, aesthetics and economics by employing industrial design principles and by suitable selection of material & processing including use of polymers, composites and other non metallic materials. studies. Product design for manual assembly. Design for high speed automatic and robot assembly. Design for machining. Design for injection moulding, die casting and powder metal processing. Design for sheet metal working. Computer aided DFMA. Architecture of DFMA and its implementation for Mechanical system Design.
MEL 746 Design for Noise, Vibration and Harshness: 4 credits (3-0-2)
Fundamentals of Vibrations and their manifestations in real life systems. Review of Design of a Vibration Absorber. Vibration Reduction Measures, Unconstrained and cosntrained layer damping treatment, add on dampers, and stiffners. Changing the dynamic characteristics of a structure, Structural dynamics modification. Predicting the modification (dynamic design) Design of Isolators in machine foundations. Role of materials damping. Balanicing of rotating machinery. Rigid and flexible rotor balancing. Active Vibrations control. Introduction of wave analysis of structures and spaces. , Characteristics of Duct and Cabin Noise. Stationary modes. Random noise. Measures of a sound accoustic design, importance of reverberations time. Various types of acoustic testing chambers. Noise measurement and control instruments. Sound Intensity Mapping Noise isolation design. Noise absorber design. Design of silencers, mufflers. Acoustic Design of Buildings.
106
Mechanical Engineering distributions, Central limit theorem, Chance and assignable causes of quality variation, Process control charts for variables, Control chart parameters, Target process setting / Centering, Control limits and specification limits. Process capability studies, Capability indices, Quality remedial / Corrective actions, Special purpose control charts, Reject limits, Variables inspection and attributes Inspection, Control charts for attributes, Narrow limit gauging, Quality rating, Defects classification, Average run length, Sensitivity of control charts. Sampling inspection for product acceptance, Single, double, multiple & sequential sampling schemes, OC, AOQ, ASN, and ATI curves, Design of sampling plans, Standard sampling systems, Economics of product inspection, Quality costs, ISO 9000 quality system, Product quality and reliability, Failure data analysis and life testing. Problems and illustrations in Quality Assurance.
Location of plant with multi-plant operation, locational dynamics, transportation model in plant location. Facilities planning types of layouts. Charts required for facilities planning. Role of templates in plant layout. Quantitative methods in process layouts. Computerized layout planning. CRAFT, CORELAP, ALDEP. Single and multifacilities location and layout models. Min-max location. Location allocation models. Production and assembly line balancing. Various algorithms in assembly line balancing. Job enlargement in line production. Plant maintenance. Characteristics of optimal maintenance policies. Preventive maintenance policy selection. Manpower planning and scheduling for maintenance. Concepts in tero-technology. Case studies.
107
Mechanical Engineering sensitivity analysis, transportation problem, dynamic programming ,Integer programming, goal programming, network analysis, some of the main stochastic models used in engineering and operations research applications: Poisson process, birth and death processes with applications in queuing models, inventory models. forming processes- forging, rolling, extrusion, wire drawing and sheet metal forming, Design of roll pass and rolling schedules, Description of typical cold rolling and hot rolling mill plants, Computer aided die design for forging, extrusion and wire drawing, Automation in metal forming processes, Recent developments in forming equipment (high speed presses etc.), Advances in sheet metal forming, Sheet metal die design, Formability evaluation, Unconventional forming processes like Hydrostatic extrusion, High energy rate forming processes, Hydro-forming of sheets and tubes, Powder forming, Finite Element Simulation of forming processes. Thermal stresses and distortion, Brittle fracture and fatigue in welded joints, NDT of welds, Introduction to engineering physical metallurgy, Joining metallurgy and microstructures, Joint preparation weld symbols, Weld joint designs for strength and quality, Automation in welding, Cost analysis
108
Mechanical Engineering devices, sequence operation of hydraulic/pneumatic actuators, designing of complete systems with hydraulic, electro-hydrolic and digital control devices, applications in manufacturing, material handling systems, feeders, orienting and escapement devices, their analysis and design, Automatic assembly machines, designing for automatic assembly. welding arc and arc characteristics, Metal transfer & its importance in arc welding, Various forces acting on a molten droplet and melting rates, Power sources for arc welding, Welding consumables: fluxes, gases and filler materials, SMAW, SAW, GTAW and related processes, GMAW and variants, PAW, Gas welding, Soldering, Brazing and diffusion bonding, Thermal cutting of metals, Surfacing and spraying of metals, Resistance welding processes: spot, seam, butt, flash, projection, percussion etc, Thermit welding, Electro-slag and electro-gas welding, Solid-state and radiant energy welding processes such as EBW; LBW; USW, Explosive welding; Friction welding etc, Welding of plastics, Advances, challenges and bottlenecks in welding. and types, capacity & clamping tonnage, mold size, plasticating extruder concepts, molding properties and control parameters, molding cycle, Injection Molds for thermoplastics, cavity and coreinteger & insert type, product consideration, material consideration, shrinkage, flow length, mold temperature, molding stresses, parting line, feeding system design - sprue, runner, gate, weld line strength, ejection system design, mold cooling systems, runnerless molding, gas assisted and thermosets molding.
FRP Composites, fiber types, fiber forms and properties, matrices type and properties, lamina, laminate, compositesmacro and micromechanical analysis & properties, failure theories, primary and secondary manufacturing - Lay-up, Filament winding, Pultrusion, Compression moulding, RTM, RIM, SRIM, machining - drilling, routing etc., application Metal Matrix Compositespowder metallurgy, sintering, squeeze casting, applications Ceramic Matrix Compositesclays, whiskers, fibers, mixing, mass processing techniques, applications.
109
Mechanical Engineering parameters, dimensionless numbers. External laminar flow heat transfer. Internal laminar flow heat transfer, entrance region. Turbulent flow heat transfer, turbulent Prandtl number, external and internal flows. Natural convection in external and bounded flows. Mixed convection. Boilingpool boiling and forced convection boiling in tubes. Condensation over a plate, tube and tube banks. Mass transfer. Applications to engineering problems. and implementation issues. External and internal flow simulations. Numerical methods for radiationenclosures with gray gas, Hottel zone method. Combined convection and radiation. Applications of Monte-Carlo method. Special topics. In the 3rd semester, the topic will have to be different from the major project.
110
Mechanical Engineering committee for evaluation. The grade to be decided on the basis of the two assessments. The project will also be displayed at an open house. combustion. Combustion of solids. Industrial applications involving combustion. Burner design, testing and control. Emissions. Combustion safety.
MED 831 Major Project Part 1 (Design of Mechanical Equipment): 6 credits (0-0-12) MED 832 Major Project Part-2 (Design of Mechanical Equipment): 12 credits (0-0-24) MEL 832 Multibody System Vibration Design: 4 credits (3-0-2)
Definition of multibody systems, Introduction to rigid, multibody dynamics, Virtual work, Euler-Lagrange and Orthogonal complement approaches to derive the dynamic equations of multibody systems; Dynamics of flexible-body system, Modeling with flexible bodies; Mode shapes, modal analyses; Discrete and finite element modeling; Introduction to modal updating, Technique of correlation of analytical and experimental models.
MES 830 Independent Study (Design of Mechanical Equipment): 4 credits (0-4-0) MEL 831 Advanced Theory of Vibration: 4 credits (3-0-2)
Introduction to variational calculus and derivation of equations of motion of vibrating systems. Ritz. Galerkin and Kantrovich methods. Transform methods for free and forced vibrations. Modal analysis, Greens functions Operators and free response. Linear and compact operators, Eigenvalue estimates. Forced response passive and active control of machine and structural vibrations. Distributed modal control. Graphical and analytical methods of solution of non-linear systems. Systems with variable coefficient. Stability criteria. Nonlinear vibrations of continuous systems like beams and plates. Chaos in dynamic systems. Computational and experimental techniques of analysis.
111
Mechanical Engineering safety standards, rigid body and FE based human body models in impact.
multi-degree-of-freedom systems. Modal analysis. Dynamics of strings, rods shafts, membranes. Dynamics of beams, plates and shells. Analytical and computational methods. Substructuring. Reduced order models. Random vibration of structures. Introduction to Statistical Energy Analysis. Introduction to wave propagation. Group velocity, phase velocity, dispersion. Examples and applications to mechanical systems. Approximate methods, the finite element method.
MEL 840 Experimental Modal Analysis and Dynamic Design: 4 credits (3-0-2)
Introduction to modal testing. Dynamic test data measurement and processing methods. Frequency response functions for multidegree-of-freedoms systems, forced response. Experimental and theoretical modal analysis - algorithms and codes. Applications of modal testing in system and force identification, structural dynamic modification, sensitivity analysis and frequency response coupling of substructure etc. Introduction to non-linear vibration analysis. Introduction to discrete systems and finite element modelling. Comparison of numerical data with test results. Introduction to model updating, Techniques of correlation of analytical and experimental models. Dynamic design of mechanical equipment structures via model testing, structural dynamic modification and model updating.
112
Mechanical Engineering composites. Introduction to smart materials, electro-rheological, piezoelectric, shape-memory and magneto-strictive materials. Material characteristics of smart materials. Application of smart materials for design of intelligent structures. Modeling Analysis and design of simple mechanical systems using smart materials. Automation strategies, Towards Flexible Automation, Islands of automation, Evolution Towards CIM systems, Computer based integration between various functions - manufacturing, sales, design, materials etc Flexible Manufacturing Systems (FMS) as mini CIM, Computer Integrated Production Management, ERP, Group technology, Concurrent Engineering, Simulation and AI in CIM systems, CIM and Beyond. Series, parallel and mixed configurations. k-out-of-n-structure. Economics of introducing a stand by or redundancy into a production system, optimum design configuration of a series/parallel system : maximizing reliability subject to budgetary constraint optimum level of active parallel redundancy for an equipment with components subject to failure. Maintainability: Maintainability increment Equipment and mission availability. Replacement Decisions: Economic models, block replacement policy, age replacement policy, replacement policies to minimize downtime, economics of preventive maintenance. Inspection Decisions : Optimal inspection frequency to profit maximizing, minimisation of downtime and availability maximization. Overhaul and Repair Decisions : Optimal overhaul/repair/replace maintenance policies for equipment subject to breakdown finite and infinite time horizon. Optimal repair effort of a maintenance work force to meet fluctuating taking into subcontracting opportunities. Spares Provisioning : Spares provisioning for single and multiechelon systems under budgetary constraints. Maintenance Organisation: Computer application in maintenance management, MIS for maintenance.
MES 860 Independent Study (Industrial Engineering): 3 credits (0-3-0) MEL 861 Industrial Application of Simulation: 3 credits (2-0-2)
Fundamentals of Monte Carlo simulation. Simulation of arbitrary prodistributions. Random number generation; multiplicative and congruential methods. Flow charting. Development of system models. Queuing, Inventory and other industrial applications.
MED 861 Major Project Part1 (Industrial Engineering): 6 credits (0-0-12) MED 862 Major Project Part-2 (Industrial Engineering): 12 credits (0-0-24) MEL 865 Systems Dynamics Modeling and Industrial Applications: 3 credits (2-0-2)
Introduction to system dynamics, Causal-loop diagramming. Flow diagramming, Positive feedback structure. Negative feedback structure. S-shaped growth structure, Delays, Counter intuitive behavior of Social System as bounded rationality. Application in planning and policy Hesign for Production System. Dynamics created by interactions with company suppliers, labours, customers and competitors. System dynamics models to evaluate financial performance of organizations. Dynamics created by capacity expansion and professional resource expansion. Case studies. DYNAMO, STELLA and SD based management games.
113
Mechanical Engineering Need for Knowledge and its effective Management (KM), role of IT, KM and challenges of CIMS, intelligent manufacturing, ERP, SCM and CRM, e-manufacturing etc. KM technical concepts: (data vs information vs knowledge), The Knowledge Edge, Knowledge Engineering, KM Framework (process steps), Aligning KM with Manufacturing Strategy, Business Strategy etc., design and deployment of KM in industrial enterprises( KM team, KM system analysis, Developing Effective Systems, Knowledge Audit), IT based tools, role of performance measurement, KM and competitive link, intelligent manufacturing, agile enterprises, cases, presentations, group exercises. Role of Simulation and Intelligent Systems, KM Deployment, Managing Innovation, Performance Measurement, Applications.
processes. Game theory. Geometric programming and applications. Computer search methods. Steepest ascent/descent methods of optimization. Numerical optimization. Case studies. Multiple objective decision-making and fuzzy sets.
MES 880 Independent Study (Production Engineering): 3 credits (0-3-0) MED 881 Major Project Part 1 (Production Engineering): 6 credits (0-0-12) MED 882 Major Project Part-2 (Production Engineering): 12 credits (0-0-24) MED 895 Major Project (M.S. Research): 40 credits (0-0-80)
114
DEPARTMENT OF PHYSICS
PHL 701 Electronic Properties of Materials: transformations: nucleation and growth, solid-solid transformation and spinodal decomposition, Growth of single crystals: growth from melt, vapor phase and solution, Deterioration of materials: Corrosion, galvanic cells, passivation, Oxidation: oxide growth mechanisms, oxidation control and oxidation resistance of alloys. sintering, and thin films by spray pyrolysis & spinning, and characterization of (i) Hall measure-ments, and optical properties of thin films by spectrophotometric and ellipsometric measurement, (ii) Thermal properties of alloys, (iii) Dielectric properties, dielectric dispersion and voltage dependent resistivity of certain electronic ceramics, (iv) structural determination of crystals, and (v) Estimation of dislocation density by chemical etching.
3 credits (3-0-0)
Drude and Sommerfeld theories of metals, Effect of periodic lattice potential, Magnetic behaviour-exchange interaction and magnetic domains, Ferrimagnetic order, ferrites and garnets, hard and soft magnets, single domain magnets, spin waves, surface magnetism, dielectric constants of solids and liquids, Claussius-Mossoti relation, dielectric dispersion and losses, piezo, ferro-and pyroelectricity, optical constants, atomistic theory of optical properties, quantum mechanical treatment, band transitions, dispersion, plasma oscillations
Silicon wafer fabrication and oxidation techniques, Growth kinetics, Oxide growth measurements techniques, Defects in silicon, silicon dioxide, Interface defects, Point defect based model for oxidation, Polysilicon, Si3N4 and Silicide formation. UV, Electron, plasma and x-ray lithography techniques, Wet etching and plasma etching techniques. Diffusion and ion implantation, Diffusion in polycrystalline materials, Ion implantation techniques, Modeling and measurement of dopant profiles, Overview of process flow for IC technology.
PHP 712 Solid State Materials Laboratory II: 4.5 credits (0-0-9)
The experiments will be primarily on the preparation of thin film by thermal evaporation and sputtering techniques, growth of SiO 2 on Si by oxidation, synthesis of polycrystalline samples of ferrites, high temperature superconductors and electronic ceramics, and characterization of (i) electronic and optical properties of thin films, (ii) magnetic, thermo-resistive and superconducting properties of electronic ceramics.
Physical Vapor Deposition - Hertz Knudsen equation; mass evaporation rate; Knudsen cell, Directional distribution of evaporating species Evaporation of elements, compounds, alloys, Raoults law; e-beam, pulsed laser and ion beam evaporation, Glow Discharge and Plasma, Sputtering mechanisms and yield, dc and rf sputtering, Bias sputtering, magnetically enhanced sputtering systems, reactive sputtering, Hybrid and Modified PVDIon plating, reactive evaporation, ion beam assisted deposition, Chemical Vapor Deposition - reaction chemistry and thermody-namics of CVD; Thermal CVD, laser & plasma enhanced CVD, Chemical Techniques - Spray Pyrolysis, Electrodeposition, Sol-Gel and LB Techniques, Nucleation & Growth: capillarity theory, atomistic and kinetic models of nucleation, basic modes of thin film growth, stages of film growth & mechanisms, amorphous thin films, Epitaxyhomo, hetero and coherent epilayers, lattice misfit and imperfections, epitaxy of compound semiconductors, scope of devices and applications.
Review of Quantum Theory of Semiconductors, Semiconductors in Equilibrium, Carrier Transport in Semiconductors, Semiconductor Under Non-Equilibrium, Physics of Junction Devices, Metal-semiconductor & Semiconductor heterojunctions, Physics of bipolar devices, Fundamentals of MOS and Field effect Devices, Basics of Solar Cell.
Phase diagrams : allotropic transformations, Vegard law, binary and ternary phase diagrams and nonequilibrium phase transformations, Purification of materials: theory for effective distribution coefficients and its determination, zone refining, Diffusion: Laws and mechanisms for surface, grain boundary and volume diffusion, Phase
Crystallography, X-Ray Diffraction Methods, Reitveld Refinement, Neutron Diffraction, X-Ray absorption, X-Ray Fluorescence spectroscopy, Electron Diffraction- diffraction pattern in specific modes, LEED and RHEED, Electron Optics, Electron MicroscopyTransmission and Scanning Electron Microscopy, STM and AFM, Compositional analysis employing AES, ESCA and Electron Probe Microanalysis.
The experiments will be primarily on the preparation of Single crystals from melt, polycrystalline bulks by conventional
115
Physics
Behavior of Gases; Gas Transport Phenomenon, Viscous, molecular and transition flow regimes, Measurement of Pressure, Residual Gas Analyses; Production of Vacuum - Mechanical pumps, Diffusion pump, Getter and Ion pumps, Cryopumps, Materials in Vacuum; High Vacuum, and Ultra High Vacuum Systems; Leak Detection. Properties of engineering materials at low temperatures; Cryogenic Fluids Hydrogen, Helium 3, Helium 4, Superfluidity, Experimental Methods at Low Temperature: Closed Cycle Refrigerators, Single and Double Cycle He3 refrigerator, He4 refrigerator, He3He4 dilution refrigerator, Pomeranchuk Cooling, Pulsed Refrigerator System, Magnetic Refrigerators, Thermoelectric coolers; Cryostat Design: Cryogenic level sensors, Handling of cryogenic liquids, Cryogenic thermometry.
edge and absorption tail, high absorption region, sum rules, Some case studies and applications of important amorphous materials, hydrogenated amorphous silicon, chalcogenide glass, metallic glasses.
Physics of low-dimensional materials, 1D, 2D and 3D confinement, Density of states, Excitons, Coulomb blockade, Surface plasmon, Size and surface dependence of physical, electronic, optical, luminescence, thermodynamical, magnetic, catalysis, gas sensing and mechanical properties. Physical and chemical techniques for nanomaterial synthesis, Assembling and self organization of nanostructures, Nanoscale manipulation, Nanotube and wire formation, Importance of size distribution control, size measurement and size selection.
radiation from a surface; Brightness and luminous intensity distribution; Integrating sphere; Illumination from line, surface and volume sources; Illumination in images; Colorimetry: Fundamentals, trichromatic specifications, colorimeters, CIE system; Conventional light sources: Point and extended sources; Inc andescent, fluorescent, arc and gas discharge lamps; LEDs; Illumination engineering: Lighting fundamentals, day lighting, examples of design, lighting of factories and streets: Optical Detectors: Photographic emulsion, thermal and photon detectors; Detector characteristics and figures of merit, noise considerations; Photoconductors and characteristics; Photomultiplier tubes, photodiodes; calibration of detectors; detector arrays, CCD.
Demagnetisation factor, Antiferromagnetism, Neutron diffraction, Magnetism in Rare Earths and Antiferromagnetic Alloys, Helimagnetism, Ferrimagnetism, Spin Glasses, Magnetotstriction, Domains and magnetization process, Single Domain Particles, Coercivity in fine particles, Superparamagnetism, Spintronics, Magnetoresistance, ApplicationsType-I Superconductivity, London theory, Specific Heat and Thermal Conductivity, Intermediate State, Measurements of Critical currents and Magnetic Properties, Critical State Models, Ginzberg-Landau and BCS Theory, Josephson effects, SQUIDs, Type-II Superconductivity; Pinning of Vortices, High Temperature Superconductors, Flux Flow, Flux Creep, Fluctuation effects, Levitation and Electrical Power Applications of HTSC.
Bandstructure modification by alloying and strain, Modulation doping, Lattice matched and lattice mismatched materials, Strained hetrostructures. Quantum confinements in 2D, Excitons, lattice vibrations and electron transport in quantum structures, Optical behavior and inter band transitions, Electro optic and quantum Hall effects. Motivation for using hetrostructures for devices, Schottky barrier and p-i-n photodetector, Charge coupled devices, Edge emitting, Surface emitting and Quantum well LEDs and lasers. Hetro structure FET, Velocity modulation and quantum interference transistor, Hetrostructure bipolar transistor and Resonant tunneling devices.
Review of laser theory, properties of laser radiation, and laser safety; Common laser systems : Ruby-, Nd:YAG- and Nd:Glass lasers, diodepumped solid state laser, Er-doped silica fiber laser, Ti:Sapphire laser, He-Ne, CO2 and Ar-ion lasers, excimer-, dye-, X-ray- and free-electron lasers; Semiconductor lasers : Double heterostructureand quantum-well lasers, VCSEL, DFB- and DBR lasers; Application of lasers in data storage, communication and information technology : CD players, DVDs, laser printers, bar-code scanners, and optical communication; Surface profile and dimensional measurements using diffraction and its variations; High-power laser applications: marking, drilling, cutting, welding, and hardening; laser fusion; Laser Doppler velocimetry, LIDAR, laser spectroscopy, medical applications of lasers.
Types of amorphous solids, aspects of glass transition, structure, rcp and crn structures, EXAFS and Synchroton radiation, Molecular solids and Network dimensionality, network solids, 8-N rule, topological defects and valence alteration, Electronic structure of amorphous solids, localized and extended states, mobility edges, CFO model, Density of states and their determination, transport in extended and localized states, Optical properties of amorphous semiconductors, absorption
The contents would include specific advanced topics of current interest in Materials Synthesis, New Materials and their behavior and New Device structures and concepts. The contents would be announced every time the course is offered as a self study course.
Eye and Vision: Visual system, accommodation, adaptation, sensitivity, acuity; Radiometry & Photometry: Radiometric quantities and their measurement, color and brightness temperature; photometric quantities,
Gaussian theory of optical system; Aberrations: Transverse ray and wave aberrations, chromatic aberration and third order aberrations; Ray tracing: paraxial, finite and oblique rays; Image evaluation; Geometric OTF. its computation and measurement; Strehl ratio; Variance of wave aberration function, RMS wave aberration function, spot diagram;Optimisation techniques in lens design, definition of merit function, commonly used optimisation methods, damped least square method, orthonormalization, and global search method; Tolerance analysis; Achromatic
116
Physics doublets, apochromats and aplanats; Cooke Triplet and its derivatives; Double Gauss lens, Introduction to zoom. Lenses and aspherics; Examples of modem optical systems such as optical systems using aspherics, zoom lens, GRIN optics.
PHL 756 Fourier Optics and Optical Information Processing: 3 credits (3-0-0)
Signals and systems, Fourier transform (FT), sampling theorem; Diffraction theory: Fresnel-Kirchhoff formulation and angular spectrum method, brief discussion of Fresnel and Fraunhofer diffraction, FT properties of lenses and image formation by a lens; Frequency response of a diffraction-limited system under coherent and incoherent illumination, OTF - effects of aberration and apodization, comparison of coherent and incoherent imaging, super-resolution; Techniques for measurement of OTF; Analog optical information processing: Abbe-Porter experiment, phase contrast microscopy and other simple applications; Coherent image processing: vanderLugt filter; joint-transform correlator; character recognition, invariant pattern recognition, image restoration; Data processing from synthetic aperture radar (SAR), acousto-optic signal processing, discrete analog processors.
Spectroscopic instrumentation; FabryPerot interferometer, diffraction gratings, Fourier transform spectroscopy; Interferometric instrumentation for testing; shearing, scatter fringe, threebeam and polarization interferometers; Scanning microscopy: Imaging modes, depth discrimination, super resolution, practical aspects, measurements on semiconducting devices, near-field techniques; Displays : television optics, liquid crystal displays, video projectors; Adaptive optics : Wavefront sensing and correction, adaptive systems, reconstruction and controls; Optomedical Instruments: Keratometers, opthalmoscopes, optometers, optical coherence tomography; Infrared instrumentation: I.R. telescopes, focal plane arrays, cryo-cooling systems, scanning and stabilization mechanisms, smart weapon seekers, forward look infrared, space-based sensors; Space optics: Satellite cameras,high-resolution radiometers, space telescopes; Optical metrology: Surface inspection, optical gauging and profiling, techniques for nondestructive testing, Moire self imaging and speckle metrology, sensing elements, instrumentation and applications in material science and biology.
Basics of holography, in-line and off-axis holography; Reflection, white light, rainbow and wave guide holograms; Theory of plane holograms, magnification, aberrations, effects of non-linearity, band-width and source size; Volume holograms: coupled wave theory, wavelength and angular selectivity, diffraction efficiency; Recording medium for holograms: silver halides, dichromatic gelatin, photoresist, phoconductor, photorefractive crystals, etc.; Applications : microscopy; interferometry, NDT of engineering objects, particle sizing; holographic particle image velocimetry; imaging through aberrated media, phase amplification by holography; optical testing; HOEs: multifunction, polarizing, diffusers, interconnects, couplers, scanners; Optical data processing, holographic solar concentrators; antireflection coatings; holophotoelasticity; Colour holography: recording with multiple wavelength; white light colour holograms; Electron holography, acoustic and microwave holography and some typical applications, computer holography, digital holography.
The course would cover topics of current interest, not covered in other courses.
Probability theory, generating function, characteristic function; Stochastic processes, spectral properties, correlation and convolution; Analytic signal and spatial frequency analysis; Temporal, spatial and partial coherence; Propagation of coherence, Van Cittert and Zernike theorem; Higher order correlations; Differential photo detection probability, joint probability of multiple photodetection, Mandels formula; Intensity interferometry; Quantum theory of light, density operators and Wigner Ofunction; Coherent states and squeezed states; Photon statistics, nonclassical states and EPR paradox; Laser Doppler velocimetry, light beating and photon correlation spectroscopy; Doppler free spectroscopy, saturation spectroscopy; Laser speckle statistics.
Experiments involving testing and measurements with the following instruments : Strain viewer, higher precision spheroscope, micro-optic autocollimator, knife edge and star test apparatus, Fizeau interferometer, Twyman Green interferometer, multiple beam inter- ferometer, schlieren photography, Abbe refractometer, vacuum coating unit, various types of microscopes.
This courses designed to make the students familiar with modern measurement techniques. Typical exprements are in the following areas: Spatial filtering, Holography, Speckles, Fourier optics, Contrast enhancement, Displacement measurement, vision testing, O.T.F. measurements etc.
117
Physics cutting, edging, grinding, smoothing and polishing. Polishing machines. Making of tools and test plates. Fabrication of optical components like flats, prisms, concave mirrors and lenses etc. converters, Phase conjugation: Nonlinear effects in optical fibers: SPM, XPM and FWM, solitons, SRS & SBS. plasma; Landau damping; cyclotron damping; bump- in-tail instability; beam driven instabilities; drift waves; temperature anisotropy driven modes; current drive instabilities; applications to RF heating in tokamaks and free electron laser.
This course is so designed as to (i) give the student adequate practice of preparing drawings of simple instruments and their mountings, (ii) make the student familiar with the techniques employed in a mechanical workshop and some practice in fabrication of simple attachments for optical instruments.
Review of semiconductor physics: energy bands, density of states, Fermi level, p-n junctions. Homo-and heterojunctions, quantum wells, Semiconductor materials Semiconductor optical amplifiers, LEDs and LDs: Device structure and Characteristics, DFB, DBR, and quantum well lasers, VCSELS & Laser diode arrays, Electroabsorption modulators and SEEDs, Semiconductor photodetectors; PINs and APDs, CCDs and OEICs.
PHD 851 Major Project Part-I: 6 credits (0-0-12) PHD 852 Major Project Part-II: 12 credits (0-0-24)
Planar waveguides :Step-index and graded-index waveguides, guided and radiation modes. Strip and channel waveguides, anisotropic waveguides, segmented waveguide; electro-optic and acoustooptic waveguide devices. Directional couplers, optical switch; phase and amplitude modulators, filters, etc. Y-junction, power splitters, Arrayed waveguide devices, fiber pigtailing, Fabrication of integrated optical waveguides and devices. Waveguide characterisation, end-fire and prism coupling; grating and tapered couplers, nonlinear effects in integrated optical waveguides.
Review of basic optics: Polarization, Reflection and refraction of plane waves: Diffraction: diffraction by single slit and circular aperture, Gaussian beams, Fourier optics: Interference: two beam and multiple beam interference, FabryPerot interferometer. Interaction of radiation with matter, light amplification and gain saturation. Laser rate equations, three level and four level systems; Optical Resonators: resonator stability; modes of a spherical mirror resonator, mode selection; Q-switching and mode locking in lasers: Properties of laser radiation and some laser systems.
This major project is for two semesters, but iis allotted in the month of April, so that the students can use the summer vacation period for literature survey and preliminary studies. The projects end in May/June at the end of fourth semester. The evaluation of the Part-I and Part-II would be done independently at the end of third and fourth semesters, respectively. The project can be on any topic covered under applied optics and related subject.
PHL 797 Selected Topics-I: 3 credits (3-0-0) PHL 798 Selected Topics-II: 3 credits (3-0-0) PHL 800 Numerical and Computational Methods in Research: 3 credits (3-0-0)
Fiber numerical aperture, Sources of signal attenuation and dispersion, Step and graded index multimode fibers, LP modes in optical fibers: Single-mode fibers, mode cutoff and mode field diameter, Pulse dispersion in singlemode fibers: dispersion-tailored and dispersion-compensating fibers. Birefringent fibers and polarization mode dispersion. Fiber bandwidth and dispersion management, Erbium-doped fiber amplifiers and lasers; Isolators, Fiber fabrication techniques. Fiber characterization techniques including OTDR, Connectors, splices and fiber cable.
Student, in consultation with the course coordinator, would select a topic for the self-study and prepare seminars on the topic. In addition, experts may also be invited to give lectures on advanced topics, which would also form part of the curriculum of this course.
Solution of polynomial and transcendental equations, ordinary differential equations with initial conditions, matrix algebra and simultaneous equations, eigenvalues and eigenvectors of a real symmetry matrix, least square curve fittings, numerical integration, integral equations, ordinary differential equation with boundary conditions, Monte Carlo methods and random numbers.
Wave propagation in anisotropic media, Electro-optic effect: phase and amplitude modulators. Electro-optics of liquid crystals; LCDs and SLMs. Acousto-optic effect: A.O. Diffraction: modulators, deflectors and tunable filters. Nonlinear Optics: SHG, sum & difference frequency generation, parametric amplification, Wavelength
PHD 801 Major Project Part I: 6 credits (0-0-12) PHD 802 Major Project Part II: 12 credits (0-0-24) PHL 810 Plasma Waves and Instabilities: 3 credits (3-0-0)
Review of optical fiber properties: multimode, single mode, birefringent, photonic crystal and holey fiber: Directional couplers: Analysis, fabrication and characterization: application in power dividers, wavelength division multiplexing, interleavers and loop mirrors: Fiber Bragg grating, Analysis, fabrication and characterization: application in add-drop multiplexing, gain flattening, dispersion compensation and wavelength locking: fiber half-block: devices and application in polarizers, modulators and wavelength filters, Fiber polarization components: polarization controllers and associated micro-optic components like isolators and circulators: Optical fiber sensors: Intensity, phase and polarization based sensors, applications in various disciplines.
118
TTP 711 Polymer and Fibre Chemistry Laboratory: 1.5 credits (0-0-3)
Identification of fibres by chemical and burning tests, polymerization of vinyl monomers such as styrene, acrylamide using bulk polymerization, solution polymerization, emulsion polymerization, radiation induced polymerization. Condensation polymerization and interfacial polymerization of nylon-6, Molecular weight measurement. Intrinsic viscosity and end group analysis, preparation of phenol-formaldehyde resin,. Analysis of chemical structure by FTIR, UV spectroscopy.
TTL 713 Technology of Melt Spun Fibres: 4 credits (3-1-0) TTL 714 Physical Properties of Fibres: 3 credits (3-0-0)
Introduction to fibre structure and requirements of fibre forming polymers Moisture Relations: Moisture sorption and desorption in fibres Sorption isotherms, Heats of sorption, Swelling and theories of moisture sorption. Mechanical properties: Mechanism of deformation in fibres. Principles of elasticity and viscoelasticity. Creep and stress relaxation. Boltzmann superposition principle. Dynamic mechanical properties. Model theory of visco-etasticity. Time- temperature superposition principle. Stress- strain relations. Yield and fracture. Fibre friction, its nature, theory, application and measurement. Optical properties; Polarizability and refractive index. Birefringence and its measurement. Thermal Properties; Thermal expansion. Thermal conductivity, Electrical
TTP 716 Fibre production and post-spinning operations Laboratory: 2 Credits (0-0-4)
Experiments related to fibres production processes. Effect of moisture and temperature on MFI of PET and PP. Mett spinning of PET, PP &nylon-6 filament yams on laboratory spinning machines. Single and two stage drawing of the asspun yams or industrial POY. Demonstration of high speed spinning machine. Wet and dry heat setting of PET and nylon drawn yarns. Effect of temperature and tension on heat setting. Determination of structure and mechanical properties of as spun, POY, drawn and heat set yams using DSC, Xray, PTIR, density, sonic modulus. Effect of shear rate, temperature on polymer solution viscosity using Brookfield Rheometer and ball-fall method. Wet spinning or dry jet wet spinning of PAN copolymers. False twist and air jet texturing processes. Determination of structure of textured yam under microscope.
TTP 712 Polymer and Fibre Physics Lab: 1.5 credits (0-0-3)
Characterization of fibres by Infrared spectroscopy, Density measurements , Thermal analysis such as Thermogravimetric Analysis (TGA), Differential Scanning calorimetry (DSC) and Thermo-Mechanical Analyser (TMA), Dynamic Mechanical Analysis (DMA), Sonic modulus , X-ray diffraction
119
Textile Technology
flow in ring and rotor spinning. End breaks during spinning. False twisting principles.
system, pattern data transfer and management. CAD for dobby, jacquard, label weaving and carpet: Development of Jacquard designs, process of drafting and sketch design, development of figures, composition of design, geometric ornamentation, arrangement of figures, weave simulation. Laboratory: Working on electronic dobby and electronic Jacquard, working on CAD, development of various designs on CAD and development of design samples.
TTL 718 High Performance Fibres and Composits: 3 credits (3-0-0) TTL 721 Theory of Yarn Structure: 3 credits (2-1-0)
Types of yarn. Role of yarn structure on yarn and fabric properties. Structural parameters of yarn. Twisting forms and yarn contraction. Morphology of staple yarns. Fibre characteristics in sliver, roving and yarns. Comparative analysis of structural characteristics of various types of spun yarns. Influence of fibre characteristics on yarn structure. Tensile behaviour of filament, spun, core spun and elastic yarns. Bending behaviour of yarns. Frictional behaviour of yarns. Rupture behaviour of filament and spun yarns. Geometry of plied structure. Tensile properties of plied structures.
TTL 724 Textured Yarn Technology: 3 credits (3-0-0) TTL 731 Theory of Fabric Structure: 3 credits (2-1-0)
Engineering approach to fabric formation. Fibre, yarn and fabric structure- property relationships. Crimp interchange in woven fabric. Elastica model for fabric parameters and crimp balance. Concept of fabric relaxation and set. Practical application of geometrical and elastica models. Uniaxial and biaxial tensile deformation of woven fabric. Bending deformation of woven fabric, bending behaviour of set and unset fabrics and bending in bias direction. Bending, Shear and drape properties of woven fabric. Buckling and compressional behaviour of woven fabrics. Mathematical models and their application in the study of tensile, bending, shear, compressional and buckling deformation of woven fabrics. Structure and properties of knitted and nonwoven fabrics.
120
Textile Technology classes. Dyeing of blends. Mass coloration of man-made fibres. Development in printing methods and machines. Direct, resist and discharge styles of printing. Printing of blends. Transfer printing. Physicochemicalz theories of the application of dyestuffs to textile and related materials, including the thermodynamics and kinetic principles involved. Dye-polymer interactions. Role of fibre structure in dyeing. its control. Eco labeling schemes. Industrial hygiene and safe working practices. Analytical testing of eco and environmental parameters. Eco friendly textile processing: waste minimization. standardisation and optimisation, process modification. safe & ecofriendly dyes and auxiliaries. Organic cotton, natural dyes, naturally coloured cotton, Solid (fibre & polymer waste) recyclingrecovery of monomers, energy recovery and chemical modification of fibre waste. Packaging of finished garment, final random inspection of finished garments, packaging method, safety norms. Accessories: Buttons, hook and eye, jips, velcro.
TTL 743 Principles of Colour Measurement and Communication: 3 credits (2-0-2) TTL 744 Environmental Management in Textile & Allied Industries: 3 credits (3-0-0)
Importance of ecological balance and environmental protection. Definition of waste and pollutant. Pollutant Categories and types. International and Indian legislation and enforcing agencies in pollution control. Waste management approaches; Environmental Manage-ment Systems ISO 14000. Environmental impact along the textile chain from fibre production to disposal. Toxicity of intermediates, dyes and other auxiliaries etc. Pollution load from different wet processing operations. Textile effluents and their characterization. Technology and principles of effluent treatment. Advanced colour removal technologies, Recovery and reuse of water and chemicals. Air and noise pollution and
121
Textile Technology
distribution, Control of migration in sizing, size droppings, sizing materials. Loom allocation. Control of value loss in fabrics through evaluation & grading of fabric defects. Temperature and humidity control & its effect on performance. Control of loom accessories. Control of loss of efficiency by snap study. Controls in the process of high twist yarns, blended yarns, filament yarns in warp and weft. Controls in the winding for processing yarns for dyeing & knitting.Controlling sloughing off during winding, warping & weaving. on-line data system and its use in controls.
TTL 771 Electronics and Controls for Textile Industry: 4 credits (3-0-2)
Overview of electronics and controls in modern textiles equipments and machines. Overview of basic analog electronics: Elements (R, L, C, V, I), circuit laws and theorems. Overview of basic digital electronics: Gates and ICs. Sensors and transducers (displacement, position, force, temperature, pressure, flow). Signal Conditioning. Control elements, systems and examples. Data acquisition, analysis, control and automation by microprocessors and micro controllers.
122
Textile Technology Motor and power drives. Power control devices. Some applications of data acquisitions and control systems in textiles and case studies. Laboratory: Experiments on sensors and transducers (displacement, position, strain, temperature, rotational speed). Basic analog circuits with diodes and transistors. Basic digital Gates. SCR and TRIAC control of motor speed. Data acquisition and control with micro processors/ micro contollers. Use of Computers. software packages. Rank correlation, Coefficient of concordance. Sampling inspection. Acceptance sampling : OC curve, Acceptance sampling by variables, Producer risk condition. Control Chart: Average run length, Modified control limits for averages, Cusum chart. development, machine design and development, instrumentation, product and process development or indepth study of a subject of outside the regular courses offered in the programme. This study should be carried out under the guidance of a faculty member. The subject area chosen by the student should be sufficiently different from the area of major project being persued by the student. The student must submit a detailed plan of work for the programme coordinator before approval of registration for the course.
TTD 891 Major Project Part-I (Fibre Science & Technology): 6 credits (0-0-12) TTD 892 Major Project Part-II (Fibre Science & Technology): 12 credits (0-0-24) TTD 893 Major Project Part-I (Textile Engineering): 6 credits (0-0-12) TTD 894 Major Project Part-II (Textile Engineering): 12 credits (0-0-24)
TTS 890 Independent Study (Fibre Science & Technology): 3 credits (0-3-0)
Student should undertake a research oriented activity including software
123
124
Applied Research in Electronics measurement. Mixers- Single ended, balanced, double balanced, different configurations for microstrip, waveguide etc., noise properties, simulatiion using harmonic balance, Osillators- various configurations depending on active device, stability and noise, resonators, VCO, transient analysis using SPICE, harmonic balance analysis, frequency synthesis using DDS, PLL. (QPSK, MPSK, QAM), minimum-shift keying (MSK) and comparison of band pass digital signaling systems, band pass sampling, filtering and linear distortion. Practicals: Design, simulation (P spice), realization and characterization of high gain differential amplifier used in the first stage of an operational amplifier. This will involve design and simulation of a current source, extraction spice parameters, gain characterization etc., Comparison of coding schemes, selfcorrecting codes, assembly language programming, operation a system in a closed loop for investigating the matched filtering performance, detecting the signal in a noisy environment. The already developed for RF Identification will be used for this experiment, Design fabrication and characterization of an RF antenna. Surface wave propagation in anisotropic materials. Excitation and detection of Rayleigh waves in piezoelectric materials. Analysis of interdigital transducers. Masons equivalent circuit. Delta function model. Cross field model. Impulse response model. Sampling and surface wave transducers. Band pass filter : Amplitude/phase weighting, Building block, Ramez exchange and optimization design techniques. Filter banks. Chirp filters: linear/non-linear frequency modulation schemes, reflective dot/array compressors phase coded devices, pulse compression modules and their application in radars. Realization of spectrum analyzers, frequency hopping and FFT processors using the chirp transducers. Propogation effects in materials : diffraction and beam steering, formulation using angular spectrum of plane waves, diffracted fields in the parabolic approximations. Charge transport by Surface Acoustic Waves in GaAs. Acoustic charge transfer device structure, operation and applications.
Mathamatical foundation in understanding of signal, mocrowave crcuits, and devices: Phase diagrams, duality, superposition, miller, Thevenin and Norton Theorems, instantaneous, average, complex power their representation nomenclature, Fourier series, Laplace, Fourier and Z transforms, convolution, correlation and basic properties of Fourier transforms, transimssion line theory, T and IT equivalent circuit, behavior of transmission line at radio frequency. Physcis and operation of bipolar, and MOS structures. DC and Low Frequency Circuit Concepts: BJT Biasing, mode of operation small signal AC analysis. FET circuits at DC, AC analysis, first and scond order AC models of FETs, high frequency models of BJT and FETs, single pole approximation, differential amplifiers, and frequency response, Circuit Representation of Two Port RF/ Microwave Networks. :Impedance, Admittance, Hybrid, Transmission Matrix, Generalized S parameters, Reciprocal Networks, Loss less Networks, Signal Flow graphs and its Applications, Gain Consideration in Amplifiers, Impedance Matching and network selection: power gain concept, mismatch factor, return loss, input/ output VSWR, maximum gain, constant gain design, figure of merit, matching network design using lumped and distributed elements, stability consideration in active networks. Baseband and Pulse Signaling: Sampling, quantizing and encoding, digital Signal formats: binary coding, differential coding, bit synchronization, multilevel signaling, intersymbol interference, differential pulse code modulation, delta modulation time division multiplexing, pulse time, pulse width, pulse position modulation, Amplitude and Frequency Modulation: Amplitude modulation, Double sideband suppressed carrier, Asymmetric sideband sigals, phase/ frequency modulation, narrowband angle modulation wideband frequency modulation. Band pass Digetal Signaling: ( OOK, BPSK, DPSK), multilivel signaling
Antennas: radiation concepts, diploes, monopoles, Antenna parameters (gain, efficiency etc.)- theory, comparison with simulators, and measured data for simple antennas. Analysis and synthesis of simple linear arrays. Optimizers. Equivalence theorems and application to horns and reflectors, comparison with simulations. Active and passive electronic scanning antennas. Microstrip and other printed antennas, analysis using equivalent circuit, numerical techniques. Broad band printed antennas, and other broad-band antennas for ESM. Scattering by wedge GTD, and application to short-range communications.
Experiments based on measurement and instrumentation techniques using: oscilloscopes, spectrum analyzers, network analyzers, lock-in-amplifiers, waveform generators, bit-error rate and S/N measurement, antenna characterization, telemetry, data recorders and display, etc, Experiments based on various sensors used in characterization of RF materias, devices, circuits and systems: acoustic, ultrasonic,magnetic, electrical, thermal, optical, radiation, and smart sensors, etc.
Amplifier fundamentals in CMOS, Bipolar and BiCMOS technologies. SiGe- Heterojunction Bipolar Transistors for RF applications and their noise performance, Trans-receiver building blocks for CMOS, Bipolar and BiCMOS. Low voltage, Low noise, Low power techniques in RF CMOS sub micron design receiver Architecture, RF/ Base band filtering and compensation. LNAs and VCOs at RF-Design and Limitations, Direct conversion, Image rejection, sub sampling mobile and cellular communication. Multimode, multi-band communication 3G communication. Practicals: Design and characterization of a high gain (20,000) differential Amplifier, Design and Simulation of high gain high frequency SiGe Double Hetero Structures Transistors, Characterization and simulation of a communication link, coding schemes, self correcting codes and auto-correlation process, Design and characterization of an intergrated transmit receive module, Sampling, sub sampling, band pass sampling and spectrum characterization.
CRL 720 Surface Acoustic Wave Devices and Applications: 3 credits (3-0-0) Prerequisite : Elementary Background in Signal Processings.
Signal Processing fundamentals.
Review of basic concepts in semiconductor device operation ; energy-band diagram, drift and diffusion current, generation recombination
125
Applied Research in Electronics excess carriers, and p-n junction theory. Schottky barrier diode: formation of metal-semiconductor barrier, SchottkyMott theory and modification, metalsemiconductor interface, silicides-Si interface, effect of interface states, current flow through barrier, forward and reverse bias I-V, C-V characteristcs, measurement of barrier height. Schottky diode device structures and technology Ohmic contact formation. Varactor diode, equivalent circuit, C-V characteristics for linearly graded, abrupt, and hyper abrupt p-n junction, cut-off frequency. PI-N diode general considerations, I-V and C-V characteristics. IMPATT diode, principle of operation, small signal impedance, power conversion efficiency, diode structure and fabrication. Transferred electron devices, differential negative resistance effect, Gunn diode. GaAS MESFETs, basic device structure, theory of operation equivalent circuit and analysis. Silicon MOSFETs: brief review of MOSFET theory, Passive design and operation, high frequency structures SOI based MOSFETs. Passive components in RF technology (inductors, capacitors), MMICs. charaterization of RF materials, devices, circuits and system: acoustic, ultrasonic, magnetic, electrical, thermal, optical, radiation and smart sensors., Mechanical and thermal enginering issues for RF modules/ instruments. Instrumentation concepts and measurement techniques in: Oscilloscopes, Spectrum analyzers, Network analyzer, Lock-in-amplifiers, Waveform generators, Bit-error rate measurement, S/N measurement Talemetry, Data recording and display, Recent advances in RF and Microwave measurement Techniques. switch, Membrane based switch design microwave material and mechanical considerations. The MEMS switch; cantilever based MEMS switch, membrane based switch design, microwave, material and mechanical considerations. Microwave transmission lines, membrane supported micro-strip line, coplanar waveguide, micromachined waveguide, inductors, capacitors and tunable capacitors. MEMS based RF and microwave circuits: phase shifter, resonators, filters, oscillators.
CRL 725 Technology of RF and Microwave Solid state Devices: 3 credits (3-0-0)
CRP 723 Fabrication Techniques for RF & Microwave Devices: 3 credit (1-0-4)
Concept of process flow in IC fabrication, representative process flow for diode/ MOSFET. High temperature processes; oxidation, diffusion, and annealing. Use of masks in IC fabrication, mask design and fabrication., Photolithography processes. Chemical etching processes: dry and wet etching. Vacuum and vacuum systems. Thin films in IC processing, resistive evaporation, ebeam, RF and DC sputtering processes. Concept of test chip design and process parameter extraction. Practicals: Vacuum system, Thermal evaporation, DC/RF sputtering, Mask making techniques: Coordinatograph/ Photo-plotter first Reduction Camera, Step and Repeat process, Photolithography process, Etching techniques, Oxidation/ diffusion processes, Diode fabrication, Band Pass filter fabrication, Measurement equipment calibration.
Review of semiconductor device processing technologies: process sequence development for a representative MOS technology, overview of oxidation, diffusion, mask making, pattern transfer, etching, metallization etc., process integration. Techniques of metallization: Introduction to vacuum systems. Sputtering (DC,RF and magnetron), e-beam evaporation for ohmic amd Schottky. Contact formation, silicides for gate and interconnect. Fine line lithography process: optical lithography, x-ray and e-beam lithography, lift-off techniques. Wet and plasma assisted etching techniques, RIE, RIBE. Introduction to Ion Implantation, Molecular Beam Epitaxy. Chemical Vapour Deposition (epitaxial growth, polycrystalline, silicon, dielectric films, flow pressure and plasma chemical deposition). GaAs MESFET technology. Introduction to MEMES technology.
Economics of Wireless and Fixed Communication systems, Building Blocks of RF Systems, super component design. Spread Spectrum Communication and Channel Modeling. Advanced Receiver Algorithms., Reed Solomon codes and Modulation., Wireless Application Protocols. WAP Services and Applications. Personal Communication Systems and Global Positioning Systems. CDMA and Bluetooth system Simulation. systems on Chip. 3 G Systems.
CRL 731 Selected Topics in RFDT- I: 3 credts (3-0-0) CRL 732 Selected Topics in RFDT- II: 3 credts (3-0-0) CRL 733 Selected Topics in RFDT- III: 3 credts (3-0-0) CRS 735 Independent Study: 3 credts (0-3-0) CRL 737 Selected Topics in Radars and Sonars: 3 credts (3-0-0)
Review of measurement and instrumentation basics. Principles and applications of various sensors used in
Introduction and origin of MEMS, driving force for MEMS development, fabrication process. MEMS fabrication technologies: Conventional IC fabrication processes,bulk micro machining, surface micro machining, LIGA process, anodic and fusion bonding, packaging techniques for MEMS. Sensors, Classification and terminology of sensors, evolution of semiconductor sensors, sensor characterization basic concept of acoustic, mechanical, magnetic, radiation, thermal sensors and intergratd sensors. Actuation in MEMS devices, electrostatic actuation, parallel plate capacitor-cantilever beam based movement, comb-drive structures. The MEM switch; Cantilever based MEM
The Radar and Sonar Equations: Basic System parameters; Radar and Sonar Applications. High resolution imaging sonars: Sidelook sonar, Sector-scan sonar, Modulation scanning techniques, synthetic aperture sonar, CTFM/FMCW principle. Modern Navigation and positioning techniques. The Doppler Effect, FM-CW Radar, MTI Radar, Pulse Doppler Radar, tracking and Monopulse radar, Scattering and radar crosssection, radar clutter and combating clutter.
CRD 802 Minor Project: 3 credits (0-0-6) CRD 811 Major Project-I: 6 credits (0-0-12) CRD 812 Major Project-II: 12 credits (0-0-24)
126
To carry out detailed studies (under the guidance of a faculty member) on issues like Science, Technology and Human Values, Engineering Ethics, Sustainable Development, Scientific basis of human values etc.
127
Structure and thermodynamics of atmosphere: composition of air, stratification of the atmosphere, moist adiabatic processes, stability of the atmosphere, thermodynamics of dry and moist air. Atmospheric radiation: the radiation balance of the earth: Atmospheric system. Basic equations governing atmospheric circulations: effects of rotation of the earth, scale analysis, hydrostatic and geostrophic approximations, circulation and vorticity. Waves in the atmosphere: sound waves and gravity waves, inertial oscillations, Rossby gravity waves. The planetary boundary layer: influence of obstacles on wind, mixing length theory, Ekman layer equations, the inversion layer. Weather prediction and climate studies: general circulation of the atmospheric, introducing different numerical techniques and physical parameterisation schemes, the monsoon and its simulation by numerical models.
Tropical Weather Systems: Wind systems and general circulation in the tropics. Distribution of temperature, moisture, radiation, precipitation and evaporation in the tropics. Convective systems, Inter tropical convergence zone, trade wind inversion. Diurnal and local controls - diurnal variations of rainfall, wind, temperature and pressure. Scale analysis for the tropics. Theory and observation of the tropical waves. Tropical Cyclones: Structure and Mechanism of the formation and movement, prediction of the track and intensity of tropical cyclones by objective techniques. Monsoon Meteorology : Summer and winter monsoon circulation features, onset, withdrawal and maintenance of monsoon, monsoon depression, somali jet and tropical easterly jet. Simulation of monsoon phenomena. energetics of monsoon circulation.
ASL 832 An advanced Course in Micrometeorology and Risk Assessment Techniques: 3 credits (3-0-0)
Planetary boundary layer modelling, observed characteristics of the atmospheric boundary layer, upper air measurements, theoretical treatments of the diffusion of material, dispersion during calm winds, numerical models for dispersion of pollutants, complex terrain modelling, long range transport and diffusion, risk assessment techniques for accidental release of toxic and inflammable materials, hazard analysis, potential risk, conceivable release mechanisms and release rates, dense gas dispersion, merits and demerits of various models, nomograms for determination of safe storage quantities and safe distances, estimation of vulnerable zones, model evaluation and uncetainty.
Basic concepts, thermodynamics of dry and moist air, thermodynamic diagrams, hydrostatic equilibrium, hydrostatic stability and convection, clouds and precipitation, physics of radiation : solar and terrestrial radiation, mean annual heat balance.
128
Atmospheric Sciences characteristics water masses. Salinity and temperature of the surface layers. Circulation and stratification of the Ocean: General surface circulation, deep water movement, major ocean currents. Thermohaline circulation and core analysis, temperature and density inversion in the ocean, the role of bottom topography in determining temperature and salinity distribution. Regional Oceanography: Criteria for a regional classification, regions of equatorial currents,regions of monsoon currents, Oceanography of Indian Ocean: Exploration, major current systemsSomali current, equatorial and monsoonal gyres, water masses and water types, climate, pressure field and wind systems, cloud cover and precipitation. dynamic equations of motion and continuity. Mass transport and free surface equation. Steady motion in the sea. Unsteady motions and their solution. Application of the transport equations. Analytical modelling of the tropical ocean circulation. Use of tracers in circulation studies. Storm induced upwelling in the open ocean. One-dimensional models of the upper ocean and seasonal thermocline. Numerical models of ocean tides. Two and three dimensional models of ocean currents. Models of equatorial currents. Numerical models for computing currents from the observed density fields. Numerical models of longshore current. Application of hydrodynamic numerical models of coastal upwelling. Numerical simulation of storm surges by stair-step model, shear coordinate model, coastal zone model, inland inundation model, multilevel coastal zone model, refined grid model and the river- ocean coupled model. Tide-surge interaction model.
Inviscid shallow water theory:small amplitude motion (Linear wave theory):Plane waves in a layer of constant depth, Poincare and Kelvin waves;The Rossby waves; Quasigeostrophic sealing in shallow water theory; Quasigeostrophic Rossby waves; Rossby waves in a zonal current, Resonant interaction and multiple scale analysis; a brief review of viscous flows; Quasigeostrophic motion of a stratified fluid on a sphere;Geostrophic approximation and its Limitations, Quasigeostrophic potential vorticity equation for the atmospheric synoptic scales, Rossby-wave normal modesThe vertical structure Equation; Instability theory: The linear stability problem: condition for instability, Baroclinic Instability, the basic mechanism, Eddys model, Charneys model-critical layers; Instability in the two layer model - Barotropic Instability.
Simulation and analysis of physiological systems by upto date computer techniques and development of physical models : Network representation and biomechanical analysis. Experimental approach to the measurement of electrical, mechanical and chemical parameters of human body. Biomedical signal processing and imaging modalities Research planning and interpretation of biomedical data.
129
ESP 713 Energy Laboratories: 3 credits (0-0-6) ESL 714 Power Plant Engineering: 3 credits (3-0-0)
ESP 700 Energy Laboratories: 3 credits (0-0-6) ESL 704 Basic Thermal Engineering: 1 credit (1-0-0)
First and second law of thermodynamics, Thermal fluid systems, Standard cycles, Mixtures of gases, Heat transfer, Fluid mechanics, Working examples, Laboratory work.
Types of thermal power stations. Steam power stations based on fossil fuels. Economy and thermal scheme of the steam power stations. Thermal power plant equipment : boilers, superheaters, economizers, condensers, combustion chamber and gas loop, turbines etc. Gas turbine power stations, steam gas power stations, peak load generating sets. Elements of hydropower generation. Recent advances in power plants. Elements of nuclear power plants. Nuclear reactors and fuels. Hazards due to buclear power plant. Instrumentation.
Generation: Synchronous generator operation, Power angle characteristics and the infinite bus concept, Dynamic analysis and modelling of synchronous machines, Excitation systems, Primemover governing systems, Automatic generation control, Auxiliaries. AC Transmission: Overhead and cables, Transmission line equations, Regulation and transmission line losses, Reactive power compensation, Flexible AC transmission. HVDC Transmission: HVDC converters,
130
Energy Studies Physics of semiconductor junctions for photovoltaic and photo-electrochemical conversion of solar energy. Fabrication and evaluation of various solar cells. Applications of solar cells in photo voltaic power generation systems. Technology and physics of thermo-electric generators. Thermo-electric materials and optimization studies. Basic concepts and design considerations of MHD generators. Cycle analysis of MHD systems. Thermionic power conversion and plasma. Thermodynamics and performance of fuel cells and their applications. elements, Hydropower and its constraints, Environmental Impacts of coal based power generation, Wind energy: Technology and economics, Resources, Systems and regional strategies, Solar thermal power, Photovoltaic technology, Biomass power ocean and power, Social cost estimates, Duel fuel cycles, Global climate change, CO2 reduction potential of renewable energy, Social considerations. measurement, aerofoil design; wind mill and wind electric generator. Mini and micro-hydel.
ESL 742 Economics & Financing of Renewable Energy Systems: 3 credits (3-0-0)
Economic growth, Characteristics of developing countries, Structural changes in the process of development, Relationship between agriculture & industry, Energy planning, Input output model, Financial and economic evaluation of Non-conventional systems. Case studies.
ESL 736 Power from Renewables & Environmental Impacts: 3 credits (3-0-0)
Renewable electricity and key
131
Energy Studies analysis. Environmental repercussions and the economic structure. Conflict between energy consumption and pollution. Systems design and quantitative economic policy with particular reference to energy. Econometry in the context of multiple objectives, conflicting goals and decisions under uncertainty. Benefit-costa: Costs, Criteria for evaluating environmental, Decentralized policies, Command and control strategies, Incentive based strategies, emission taxes and subsidies, Transferable discharge permits, Environmental policies, Economic development and the environment, The global environment, International environmental agreements. and air type. Theory of flat plate collectors, advanced collectors, optical design of concentrators, selective coatings, solar water heating, solar dryers, solar stills, solar cooling and refrigeration. Thermal storage. Conversion of heat into mechanical energy. Active and passive heating of buildings. Solar cells.
ESL 768 Wind and Small Hydro Energy Systems: 3 credits (3-0-0)
Introduction General theories of wind machines, basic laws and concepts of aerodynamics. Description and performance of the horizontalaxis wind machines. Description and performance of the verticalaxis wind machines. The generation of electricity by wind machines, case studies. Overview of micro mini and small hydro. Site selection and civil works. Penstocks and turbines. Speed and voltage regulation. Investment issues, load management and tariff collection. Distribution and marketing issues, case studies. Wind and hydro based stand-alone hybrid power systems. Control of hybrid power systems.
ESL 774 Quantitative Methods for Energy Management & Planning: 3 credits (3-0-0)
A review of probability concepts;
132
Energy Studies Forecasting; Decision making using probabilities. Linear programming; Graphical solution; Simplex method, Duality and post-optimality analysis; Integer programming; Optimal technology mix in micro and macro level energy planning exercises. Sequencing, Quening theory; Networks; PERT and CPM, Decision theory, Markov analysis. Non linear programming; Decision making with uncertainty decision making with multiple objectives, Deterministic and probabilistic dynamic programming. Steam turbine, Diesel engine, Bottoming cycles, Industry/utility cogeneration, Thermodynamic evaluation, Technoeconomic evaluation, Environmental evaluation. Cogeneration in sugar and steel industry, Case studies.
ESL 788 Industrial & Commercial Applications of Renewable Energy Sources: 3 credits (3-0-0)
Commercial and industrial energy demand; Qualitative and quantitative features and characteristics. Renewable & electricity for a growing economy. Water heating, process heating and drying applications; Solar, Biomass and geothermal energy based systems, Combined space and building service hotwater systems. Electricity generation from renewable to meet commercial and industrial power requirement. Stand alone and grid connected systems. Ethanol and methanol from cellulosic biomass, Use of renewable in commercial and industrial buildings for load levelling, lighting and space heating and cooling. Economics of renewable energy based commercial and industrial installations case studies.
ESL 796 Operation & Control of Electrical Energy Systems: 3 credits (3-0-0)
Introduction: Power plant operation and
133
Energy Studies control, Heretical operation of the grid system. Power system, operation aspects: Classification, Time decomposition, Network level decomposition, Mode decomposition, User oriented decomposition, User oriented decomposition, Analysis decomposition, Control flow decomposition. Energy management: Energy control centre functions, Power system control centre: Hardware and software structure, Dispatchers activities, Power system and dispatch raining simulator, Energy management systems, Expert systems, Optimal operation of electrical power systems: Modelling of fuel costs, Equal incremental cost loading, Transmission line losses, Optimal operation of hydro thermal and allthermal systems. Energy conservation and economics: Energy conservation, Demand reduction options: industrial, illumination and electric traction, Cogeneration, Computer based flexible load balancing systems, Economic analysis tariffs. Power quality-voltage fluctuations and harmonics: Voltage fluctuations, Equipment design to withstand voltage fluctuations harmonics, Effect of harmonic currents and voltages, Harmonic standards, UPS selection, Installation operation and maintenance. Voltage and reactive power calculations and control: Voltage classes and nomenclature, voltage drop calculations, Voltage control, VAR requirements and power factor, Capacitors unit and bank rating, Protection of capacitors and switching, Controls for switched capacitors and fields testing. NOx treatments. Cooling towers for thermal pollution and solid waste treatment plants, fly ash disposal and utilization. Efficiency improvement of power plants, Combined cycle, Integrated gasification combined cycle (IGCC). Newton Raphson method, Decoupled power flow method. Security analysis: Z bus methods in contingency analysis, Adding and removing multiple lines, Interconnected systems, Single contingency and multiple contingencies, Analysis by DC model, System reduction for contingency studies. State Estimation: Lone power flow state estimator, Method of least squares, Statistics error and estimates, Test for bad data, Monitoring the power system, Determination of variance, Improving state estimates by adding measurements, Hierarchical state estimation, Dynamic state estimation. Power system stability: Transient and dynamic stability, Swing equation, Electric power relations, Concepts in transient stability, Method for stability assessment, Improving system stability.
134
Energy Studies in various R&D institutions. (Case studies and current scenario). Emerging areas for technology development. Alternative Liquid Fuels. Alcohol fuels Ethanol & Methanol. Fuel composition, Fuel Induction techniques, fumigation, emission of oxygenates, applications to engines and automotive conversions. Biodiesel formulation techniques, transesterification, application in diesel engines. CME (Di-methyl ether), properties Fuel injection consideration General introduction to LPG and LNG. Compressed Natural Gas compoenents, mixtures and kits, fuel supply system and emission studies and control. Hydrogen combustion characteristics, flashback control techniques, safety aspects and system development, NOx emission control, Biogas, Producer gas and their characteristics System development for engine application.
135
RDL 740 Technology for Utilization of Wastelands and Weeds: 3 credits (3-0-0)
Land as a parameter in rural development. Wastelands and importance of using them. Biomass growth on various types of lands. Introduction to plant taxonomy, underutilized terrestrial plants and aquatic weeds, flora of tropics, arid lands and hilly areas. Constituents of biomass, biochemical and chemical conversion processes. Applications of biomass as unconventional plant-based source for food, cattlefeed, chemicals, fibres, construction materials and energy. An integrated technological approach to biomass and wasteland utilization. Possible ecological effects.
RDD 750 Minor Project: Intensive Study on Topics of Specific Interest: 3 credits (3-0-0) RDP 750 Biomass Laboratory: 3 credits (0-0-6)
Soil and Water analysis for Biomass Production : Soil Sampling from a plot/ field and soil analysis for its texture, pH. EC. C.N.P and K. Water analysis : TDS, Alkalinity, Total Hardness, EC and pH. Soil Microflora and Root Association : Isolation and culturing of nitrogen fixers (Rhizobium. Azotobacter, Azospirillum and blue green algae). ecto and endomycorrhizal fungi. Measurement of total microbial biomass in soil and respiration rate of microbes. Bacterial and fungal root infection. Biomass Production and Recycling : Micropropagation and other vegetative techniques for biomass production. Seed treatment. seed germination and nursery raising. Vermiculturing and Vermicomposting, mushroom culturing and spawn production, silkworm rearing. Bioinoculants for rapid composting. Compost Analysis : C.N.P.K. cellulose, hemicellulose, lignin, humus and its fractions. Physico-chemicial properties of biomass.
RDL 710 Rural India and Planning for Development: 3 credits (3-0-0)
Historical and Geographical Aspects : Ancient and present structure of villages characteristics of rural life, zonal and regional peculiarities, social and religious stratifications. Social Aspects : Influence of religion/ tradition/superstitions, psycho- social and cultural background and practices, barriers, life patterns including community living, status of women, migration. General Aspects: Health education, nutrition, sanitation, housing, indebtedness, and bonded labour. Economic Aspects : General economic conditions, disparity, unemploy-ment and wage pattern. Changes in techniques of production
136
COURSE DETAILS: ITL 702 Diagnostic Maintenance and Monitoring: 4 credits (3-0-2)
Introduction to Condition Based Maintenance (CBM), Application and economic benefits, Signature analysis online and off-line techniques, Various Condition Monitoring (CM) techniques Vibration monitoring and analysis, Shock Pulse Method, Noise monitoring, Envelope detection technique, Oil analysis including wear debris and contaminant monitoring, Performance monitoring, Acoustic emission and other techniques, Non-destructive techniques, Application and choice of the method, Computer aided monitoring including expert systems. Practical applications of diagnostic maintenance, Condition monitoring of mechanical and electrical machines, Case studies.
System concepts in RAM Engineering, Fundamentals of reliability, Failure distributions, Statistical analysis of failure data, Weibull analysis, Monte Carlo simulation, System reliability assessment. Reliability of repairable and non-repairable systems. Point, mission and steady state availability. Availability assessment. Maintainability and its assessment. Design for reliability and maintainability, Practical applications of RAM Engineering to systems, products and processes.
137
Industrial Tribology, Machine Dynamics related failures, High temperature failures, low temperature failures, etc., Studies and analysis of failed surfaces. Identification of failures, Techniques of failure analysis, Microscopic methods, Fracture mechanics techniques, Prediction of failures, Residual life assessment and life extension, Typical case studies in failure analysis, Logical fault finding and its application, Inspection and safety measures, Repair techniques and economic considerations, Failure analysis for design improvement and proactive maintenance, Design for repairbility, Case Studies. Corrosion Control- Design improvement. Selection of material, fabrication processes for corrosion control. Role of residual stresses. Changes in operating conditions. Use of inhibitors. Anodic and cathodic protection. Corrosion resistant coatings. Case studies. solids in pipelines, Mechanical Handling equipments like screw conveyors and belt conveyors, Pneumatic conveying systemsComponents, Design and Selection, Troubleshooting and Maintenance of pneumatic conveying systems, Performance evaluation of alternative systems, Bend erosion-influencing factors, materials selection and potential solutions, Case studies, and Design exercises.
138
Industrial Tribology, Machine Dynamics Bearing concepts applications. and typical Boundary Layer Concepts-Laminar and turbulent flow in bearings, mathematical modeling of flow in high-speed bearings. Elastic Deformation of bearing surfacesContact of smooth and rough solid surfaces, elasticity equation, Stress distribution and local deformation in mating surfaces due to loadings, methods to avoid singularity effects, Estimation of elastic deformation by numerical methods-Finite Difference Method (FDM), Governing equation for evaluation of film thickness in Elasto Hydrodynamic Lubrication (EHL) and its solution, Boundary conditions. Development of computer programs for mathematical modeling of flow in bearings, Numerical simulation of elastic deformation in bearing surfaces by FDM.
Viscous flow concepts-Conservation of laws and its derivations: continuity, momentum (N-S equations) and energy, Solutions of Navier-Strokes equations. Order of magnitude analysis, General Reynolds equation-2D and 3D (Cartesian and Cylindrical), Various mechanisms of pressure development in an oil film, Performance parameters.
139
IDP 705 Advanced Instrument Technology Lab: 4 credits (0-0-8) IDL 711 Instrumentation Transducers: 3 credits (3-0-0)
Transducer Fundamentals : Transducer terminology, principals, design and performance characteristics, criteria for transducer selection, smart sensor, Resistive transducer; Inductive transducers; capacitive transducers; piezoelectric transducer; semiconductor and other sensing structures. Displacement transducers; tachometers and velocity transducers; accelerometers and gyros; strain guages; force and torque transducers; flowmeters and level sensors; pressure transducers; sound and ultrasonic transducer. Phototubes and photodiodes; photovoltaic and photoconductive cells, photoemission, photoelectromagnetic, detectors pressure actuated photoelectric detectors, design and operation of optical detectors, detector characteristics. Transducer Performance : Electrical tests, measurement unit, measurement of voltage, current, frequency, impedance, noise, loading errors, resolution and threshold tests. Calibration, dynamic tests, environmental test, life test. Application of transducers: displacement, velocity, acceleration, force, stress, strain, pressure and temperature measurement. angular and linear encoders, Radar, laser and sonar distance measurement, Tachometers, Viscometer and densitometers.
IDL 712 Electronic Techniques for Signal Conditioning and Interfacing: 3 credits (3-0-0)
Analog and digital representation of
140
Instrument Design & Development Centre microprocessors in instruments, Introduction to micro-controllers and embedded systems. Introduction to DSP Chips and their application in Instruments. duction to vibrations and its isolation. Mechanical Fabrication techniques used in instruments. Practical sessions on basic mechanical fabrication processes. Design and drawing sessions. manufacture of Photo-tools, Microphotography, Photo-resist technology, Selection and preparation of metallic materials, Isotropic etching-various etch parameters and their measurements, Etching to dimensional specifications, Quantitative Examination of Photofabricated profiles, 2D-and 3D machining with case studies. Inspection & Quality control, Engineering, benefits, Limitations and difficulties with PCM, Electro-photo-etching and Photoforming. Technical considerations and economic implication.
Measurements and errors; internal and external estimates of errors; least square method and its applications, to deviation from true line, plane and circle. Surface roughness and length measurements, study of some precision measuring systems, such as, profile projector, tool makers microscope, talysurf, talyond, floating micrometer, optical and mechanical comparator, interferometers, etc. Fundamentals of precision engineering; basic design principles for precision systems; basic fabrication principles for precision systems.
Manufacturing techniques for instrument components : Injection and compression moulding of plastics, mould design considerations, common defects in moulded parts and remedies. Vacuum forming practices, former design and manufacture, applications. Fibre moulding techniques, selection and use of raw material. Pressure die casting of non-ferrous instrument parts, die design considerations. Press working of sheet metal components, behaviour of common engineering material under press working, die design considerations. Newer methods of manufacturing like EDM, ECM, laser machining and photo fabrication techniques for fine and intricate components. NC machining for precision fabrication. Finishing Processes : Heat treatment like annealing, hardening, tempering and stress relieving. Vaccum deposition, electro-deposition, hard facing and electroplating and anodizing of surfaces, surface preparation and control of parameters. Metallizing and decorative finishing, applications. Painting techniques, like electrostatic painting, powder coating.
141
Instrument Design & Development Centre Detectors: Photodetectors, photomultiplier tubes, multi-channel plates, image intensifiers, CCD and CMOS detectors, IR-detectors. averaged, Real time H.I., Laser speckle techniques; speckle photography/ interferometry, and digital speckle pattern interferometry and applications of laser speckles, Lengths, displacement and shape measurement; laserheterodyne, two-wavelength or multiplewavelength and phase-shifting interferometry, Velocity measurement; Laser Doppler and particle image velocimetry, Laser remote sensing: Different types of LIDARs (Light Detection And Ranging), and Applications; Laser alignment, gaging inspection and Laser machine vision, Industrial laser systems and instrumentation, beam delivery systems; and applications laser material processing, Laser Applications to Chemical and Environmental Analysis; Laser-induced fluorescence, Temperature measurement techniques; Laser based point-by-point, full field, holographic interferometry, and laser speckle techniques. Laser Tweezers: Single-dual-and multiple-beam tweezers, and applications.
IDL 735 Scientific and Engineering Applications of Moire Patterns: 3 credits (2-0-2)
General introduction, theory of Moire fringes, pure rotation, pure elongation, vernier mechanism of fringes. Linear and angular displacement transducers. Use of Moire technique in strain analysis, vibrations, deflections, refractometry, surface roughness. Experimental techniques and fringe photography. Technology to generate moire grids for various applications. High resolution moire. photography and its application for deformation studies in small, medium and large size structures and in thermal strains.
142
10. Copolymerisation and determination of reactivity ratios. 11. Prepration of polyvinyl alcohol. 12. Preparation of polyvinyl butyral. (b) Polymer Physics Experiments on Polymer Characterisation.
143
Polymer Science and Engineering fibres (cellulose, jute, coir etc), boron, carbon, ceramic glass, aramids, polyethylene (UHMWPE), polybenzthiazoles etc. Particulate fillers-importance of particle shape an dsize Matrix resinsthermoplastics and thermosetting matrix resins Coupling agents-surface treatment of fillers and fibres, significance of interface in composites Nanocomposites, short and continuous fibre reinforced composites, critical fibre length, anisotropic behaviour, SMC, BMC, DMC etc. Fabrication techniquesPultrusion, filament winding, prepreg technology, injection and compression moulding, bag moulding, Resin Transfer moulding, Reaction Injection moulding. Properties and performance of composites Applications. accelerators, accelerator activator, softeners, anti aging additives, miscellaneious additives: colorant, flame retarders, blowing agents, deodorants, abrasive, retarders etc. Processing and vulcanization test. Vulcanization theory and technology Natural rubber and synthetic rubbers: Styrene butadiene rubber, polybutadiene and polyisoprene rubbers, ethylene-propylene rubber, butyl and halobutyl rubber, nitrile and silicone rubber, thermoplastics elastomers, latex and foam rubber. Acrylate and fluoro elastomers. 5. 6. 7. 8. 9. Thermoforming. Melt flow index measurement Melt rheology on Rheograph Mechanical Properties of Polymers. Mould flow demonstration.
(b) Industry visit for demonstration of specific processing and testing operations.
2. 3. 4.
144
JOP 792 Fibre Optics and Optical Communication Lab-II: 3 credits (0-0-6)
Experiments on characterisation of optical fibers, sources, detectors and modulators, in the Physics Department and experiments on electronics and communication in the Electrical Engineering Department.
M. Tech. Programme in Power Generation Technology JGL 710 Power Plant Performance and Economics: 3 credits (3-0-0)
Electricity demand and growth, siting of power plants. Variable load operation in a grid, load curves for different consumers. Cost of electric power from different types of power plants. Performance characteristics of major equipment, viz., boiler, turbine, condenser, etc, and changes with operation. Data acquisition and analysis, and use of software packages for monitoring and optimization. Introduction to regulatory mechanisms. Case studies, Optimal Generation mix, Economic load dispatch, Unit commitment, Hydro thermal scheduling.
JGS 800 Independent Study: 3 credits (0-3-0) JGD 801 Major Project (Part-I): 6 credits (0-0-12) JGD 802 Major Project (Part-II): 12 credits (0-0-24) M. Tech. Programme in Polymer Science & Technology JPD 799 Minor Project: 3 credits (0-0-6) JPS 800 Independent Study: 3 credits (0-3-0) JPD 801 Major Project (Part-I): 6 credits (0-0-12) JPD 802 Major Project (Part-II): 12 credits (0-0-24) M. Tech. Programme in Telecommunication Technology & Management JMS 800 Independent Study: 3 credits (0-3-0) JMD 801 Major Project (Part-I): 6 credits (0-0-12) JMD 802 Major Project (Part-II): 12 credits (0-0-24) M. Tech Programme in VLSI Design Tools & Technology JVS 800 Independent Study: 3 credits (0-3-0) JVD 801 Major Project (Part-I): 6 credits (0-0-12) JVD 802 Major Project (Part-II): 12 credits (0-0-24) M. Tech. Programme in Instrument Technology JTS 800 Independent Study: 3 credits (0-3-0) JTD 801 Major Project (Part-I): 6 credits (0-0-12) JTD 802 Major Project (Part-II): 12 credits (0-0-24)
145
146
Selection of control panel elements, graphics and typography, colour schemes, safety and maintainability, operating manuals. Study of well detailed products, product design task Visual creativity and communication. Product design task, selecting a product with wide configuration options and alternative options. Preparation and presentation of models, stretches and renderings. Evaluation and presentation of options.
DIP 742 Studies in Product Configuration and Detailing: 3.5 credits (1-0-5)
Objective : To develop creative conceptualization capabilities in form and structural integration and its implications to user society and the producer. Configuration design for export. Behavioural aspects configuration. in product
Product in its context, family of products, inter-changeability of parts, Indian and foreign standards, market availability. Detailing plastic products while using processes like injection moulding, compression moulding, blow moulding and FRP moulding using hand laying and compression processes. Detailing for fabricated products in sheet metal, steel tubes and channel sections, aluminium sheets and extruded sections of different materials. Detailing for die casting and die design. Detailing for fabrication involving combination of materials like fabric, foam leather, cloth, rubber, plastic, metal, wood, adhesives, rivets, welding, brazing and mechanical fasteners.
147
Interdisciplinary M.Des. Programme modules to those students who have inadequate previous exposure. Autocad and page composition will be common to all students. Isometric, Axonometric, perspective and exploded views and general assembly drawing as per BIS standards. Exercises to represent products. Learning Autocad : Exercises to produce engineering drawings. Elements of word processing and desktop publishing systems. Visual fundamentals of page design. Preparing text and image files, preparing style-sheets, tags, fonts, windows and orphans, hyphenation, spacing and breaks, margins and columns, headers, footers, graphics, frames. Understanding these with reference to popular desk-top publishing packages. Exercises to produce a brochure as part of the studio exercises. alignments. Prototype fabrication of one of the projects. Designing for various types of manufacturing processes. Basic principles. Die and tool design for different manufacturing processes. Advanced manufacturing and its implications in Design. Visits to factories and tool rooms. Product design task. Mixed media, preparation and presentation of models. Visit to model making shops.
DIL 782 Advanced Materials, Processes and Finishes: 3.5 credits (2-0-3)
Objective : To acquire information and material usage skills. Structure, properties and usage of thermoplastics, thermosetting plastics. Selection and use of plastics for engineering and consumer products. Design limitation and potentials of various moulding proces- ses. Designing for plastics. Properties and use of rubber, ceramics and glass textiles. Ferrous and nonferrous metalstheir properties, processes and assembly techniques. Composites, adhesives. Significance of form in structural strength of materials and products. Influence of materials and processes on product aesthetics. Stiffness, strength and modes of failure. Ecological and environmental effects of materials: toxic and hazardous materials. International standards and code of practice. Properties and application of space age alloys. Properties and processing of natural materials like wood, bamboo, cane, leather, cloth, jute and paper and their usage at craft and industrial levels. Finishes, plating, paintings and heat treatment. Value analysis. Evaluation of comparative costs, energy requirements, wastages. Advances in new materials/processes. Sources of supply, quality evaluation. Explorations with new materials; electronic, mechanical, optical, magnetic, organic. Change of product concepts with new materials. Future trends. Product design task.
Objective : To learn the use of computers as a tool in product design. Introduction to computer aided industrial design. The technique of concurrent engineering. Using databases for material selection. Structure of CAD programmes and hardware. Relation of object space and screen space, 2D & 3D databases. Introduction to solid modelling. Detailed study of solid modelling software, studio exercises in solid modelling applications. Animation techniques and product animation. Product design task, communication of designs using CAD.
148
Interdisciplinary M.Des. Programme in design of product. Interface for modulating user involvement. Product semantics, communication of feelings, communication of structure and purpose. Communication through form, colour, graphics and text. Typography choice and readability. Printing and transfer techniques. Product graphics. Functioning of controls and display elements, knobs, push buttons, handles, and electronic displays. Investigation and study of visual, functional and ergonomical requirements of controls and displays, legibility of display elements. Study of different textures and patterns. Area, volume and proportion. Order and system. Human factors and safety in interface design. Individually planned design projects involving research analysis and design of product interface. in a corporate indentity framework. Development of integrated ethos in an organization : Corporate policy, management outlook, work ethics, in a social institution/public service. Development of a visual identity as a means of communication. Corporate mark : Logo, symbol, colour. Corporate alphabets or type style : Display style, text style or styles. Company paper : stationery design, all business forms, transmittal envelopes, mailing labels and containers. Environment design and structures : Office architecture, plant architecture, reception, interiors and entrance design. Product design : Consumer items, service image, idea, visual, presentation. Package design advertising and sales promotion : all visual media. Signage and vehicle identification and uniforms. Exhibition and displays; design control manual. ISI standard, design registration, patents, copyrights. Planning a design office. Designer and the law, professional ethics in the design profession. Designer and the future of mankind. Integrated product development. How to get results, creating a project, assessing risks and chances of success, exploiting opportunities, controlling costs and enhancing quality. Pre-degree show presentation.
To study merchandise and product standards for specific foreign countries and to design appropriate product literature, packaging and product style.
Objective : To develop insight into form, design and develop sophisti- cation in its application to cultural products. Detailed study of the structural, perceptual and spatial properties of well ordered three-dimensional orientable and non-orientable forms, their composition and the process of designing them. Exercise in transport design and other consumer/industrial products.
Objective : To work towards interaction with the industry/clients. The students will be required to visit industry, take up assignments from the industry and execute them to their highest professional capabilities. They would also be required to participate in a degree show and present their work to the public.
Objective : To research and design environmental space for communication and pleasure.
DIR 821 Design Management and Professional Practice: 2.5 credits (1-0-3)
Objective : To relate/realize designing in a corporate framework. Management of individual, group practice and corporate design office : Setting up a design office, finance, finding clients, running the office, business correspondence, brief and briefing, feasibility reports, letters of contract. Estimates of design fee : lump sum, hourly basis, retainership, consulting fee, royalties. Safety regulation, consumer protection,
149
4th Semester Objective : To groom oneself to face the challenge as an industrial designer of excellence.
use of the resources of men, money, information, material, processes. He is expected to produce designs that are elegant in conceptualization and implementation. The project will have a plurality of guides and will also have the involvement of the user/ manufacturing sector. The student is expected to submit a dissertation together with models/ drawings that brings out his grasp of the theoretical understanding of the design process and innovativeness in design.
150
Semester II 26 credits
CORE COURSES Semester I CYL501 Molecular Thermodynamics CYL502 Stereochemistry and Organic Reaction Mechanisms CYL503 Main Group Chemistry and Inorganic Solids CYL504 Biochemistry I CYL505 Instrumental Methods of Analysis CYP501 Physical Chemistry Laboratory Course I CYP502 Organic Chemistry Laboratory Course I CYP503 Inorganic Chemistry Laboratory Course I CYP504 Biochemistry Laboratory Course I Total credits Semester II CYL561 Quantum Chemistry CYL562 Organic Synthesis CYL563 Transition and Inner Transition Metal Chemistry CYL564 Biochemistry II CYL565 Chemical Dynamics and Surface Chemistry CYL566 Physical Methods of Structure Determination of Organic Compounds CYP561 Physical Chemistry Laboratory Course II CYP562 Organic Chemistry Laboratory Course II CYP563 Inorganic Chemistry Laboratory Course II CYP564 Biochemistry Laboratory Course II Total credits Semester III CYL601 Group Theory & Spectroscopy CYL602 Pericyclic Reactions and Photochemistry CYL603 Basic Organometallic Chemistry CYL604 Biochemistry III Program Elective I Program Elective II CYD660 Project Part 1 Total credits Semester IV Program Elective III Program Elective IV Open Elective I Open Elective II CYD670 Project Part 2
3 credits 3 credits 3 credits 3 credits 3 credits 2 credits 2 credits 2 credits 2 credits 23 credits 3 credits 3 credits 3 credits 3 credits 3 credits 3 credits 2 credits 2 credits 2 credits 2 credits 26 credits 3 credits 3 credits 3 credits 3 credits 3 credits 3 credits 3 credits 21 credits 3 credits 3 credits 3 credits 3 credits 8 credits
3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-0-4 0-0-4 0-0-4 0-0-4
CYL 503 Main Group Chemistry and Inorganic Solids: 3 credits (3-0-0)
Molecular symmetry. Point groups. Crystal symmetry. Space groups. Solid state structures. Bonding in solids. Rings, cages and clusters of main group elements. Synthesis, properties and structure of boranes, carboranes, borazines, silicates, zeolites, phosphazenes. Iso and hetero polyanions. Zintl phases. Bio-inorganic chemistry of main group elements.
Total credits 20 credits PROGRAM ELECTIVE COURSES CYL665 Solid State Chemistry 3 credits CYL666 Chemistry of Macromolecules 3 credits CYL667 Selected Topics in Spectroscopy 3 credits CYL668 Statistical Mechanics & Molecular Simulation Methods 3 credits CYL669 Biophysical Chemistry I 3 credits CYL675 Chemistry of Heterocyclic Compounds and Natural Products 3 credits CYL676 Bio-Organic & Medicinal Chemistry 3 credits CYL677 Supramolecular Chemistry 3 credits CYL678 Recent Trends in Organic Chemistry 3 credits CYL685 Applied Organo-metallic Chemistry 3 credits CYL686 Inorganic Polymers 3 credits CYL687 Bio-Inorganic Chemistry 3 credits CYL688 Physical Methods in Inorganic Chemistry 3 credits CYL695 Applied Biocatalysis 3 credits CYL696 Non-aqueous Enzymology 3 credits CYL697 Selected Topics in Biochemistry 3 credits
3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0
151
M.Sc. Programmes of thermodynamics, chemical equilibrium, and electrochemistry are included in this course. Examples include thermodynamics of micellization, synthesis, stablization and spectroscopy of nanoparticles, photofluorometry, electrolyte solutions, thermodynamics of cell reaction etc. Metal-metal bonded clusters. Use of lanthanide compounds as shift reagents. Bio-inorganic chemistry of iron, cobalt and copper. theoretical techniques in spectroscopy. Chemical bonding. Crystallography. Theoretical treatment of rotational, vibrational and electronic spectroscopy. Magnetic spectroscopy.
CYL 566 Physical Methods of Structure Determination of Organic Compounds: 3 credits (3-0-0)
Applications of UV, IR, NMR and mass spectral methods in structure determination of organic compounds.
CYL 665 Solid State Chemistry: 3 credits (3-0-0) CYL 666 Chemistry of Macromolecules: 3 credits (3-0-0) CYL 667 Selected Topics in Spectroscopy: 3 credits (3-0-0)
Franck-Condon principle. Fermi Golden rule. Normal mode analysis. Multiphoton spectroscopy. Molecular beam techniques. Nonlinear laser spectroscopy. Two-level systems. Precession. Rabi frequency, nutation, Block equations. Multidimensional NMR techniques.
CYL 668 Statistical Mechanics & Molecular Simulation Methods: 3 credits (3-0-0)
Theory of ensembles. Classical fluids.
152
M.Sc. Programmes Phase transitions and relaxation phenomena. Monte Carlo, molecular dynamics and Brownian dynamics computer simulations. Elucidation of structural dynamic and thermodynamic properties of chemical and biological systems.
determination of crystal structures by Rietveld analysis and single crystal studies. Electrochemical methods (cyclic voltammetry; differential pulse voltammetry, coulometry).
153
M.Sc. Programmes
Semester II 24 credits
Linear Algebra Probability Theory Real Analysis Differential Equations Introduction to Computers & Programming Total credits Complex Analysis Algebra Methods of Applied Mathematics Statistical Inference Numerical Analysis Computer Oriented Operations Research Total credits Topology Basic Computer Science Partial Differential Equations Computing Lab. I Project Part 1* Program Elective-I Open Elective-I
Total credits *Minimum 35 credits to be cleared Semester IV MAL 602 MAP 702 MAD 704 Functional Analysis Computing Lab-II Project Part 2* Program Elective-2 Program Elective-3 Open Elective-2 Total credits PROGRAM ELECTIVE COURSES MAL 607 Mathematical Logic MAL 611 Principles of Fluid Mechanics MAL 614 Advanced Matrix Theory MAL 617 Combinational Methods MAL 621 Computational Methods for Ordinary Differential Equations MAL 638 Applied Nonlinear Programming MAL 656 Graph Theory MAL 658 Programming Languages MAL 725 Stochastic Processes and Applications MAL 726 Principles of Optimization Theory MAL 727 Applied Multivariate Data Analysis MAL 728 Category Theory MAL 729 Computational Algebra and its Applications MAL 730 Cryptography MAL 731 Introduction to Chaotic Dynamical Systems MAL 732 Financial Mathematics MAL 733 Stochastic of Finance MAL 734 Algebraic Geometry MAL 735 Number Theory MAL 736 Differential Geometry
4 credits 2 credits 4 credits 4 credits 4 credits 3 credits or 4 credits 21/22 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits 4 credits
3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-0-2 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0 3-1-0
154
M.Sc. Programmes equations and also to give a concise account of fundamental concepts of existence, uniqueness, stability and qualitative properties of solutions. Initial value problems, theorems on existence, uniqueness and continuous dependence of solutions on initial data, general theory of linear differential systems, Sturms theory on separation and comparison properties of solutions, Power series method, regular singular points, General existence and uniqueness theorems for nonlinear ODE, Boundary value problems, Green functions, Sturm-Liouville problems, autonomous systems and concepts of stability.
methods. Eigen-Value problems: Power and Inverse power method. Jacobi, Giveres and Householder methods for symmetric eigenvalue problem. Numerical Solution of ODE. Taylor series, Euler and Runge-Kutta methods.
155
M.Sc. Programmes structures other than those normal provided as basic types in current programming languages; for example, linked lists, stacks, queues and trees to provide an understanding of the different implementations of these data structures, to introduce the analysis of algorithm and role of data structures in algorithm analysis. To introduce searching and sorting algorithms and their analysis. To introduce various algorithm design paradigms; for example, Greedy, Divide and Conquer, Dynamic Programming etc. Introduction to algorithms; Definition, Pseudo code; concepts of analysis of algorithms; Time complexity, space complexity, worstcase, average-case, big Oh and other notatons; Recursion and recurrence relation; Introduction to basic data structures; Stack, Queue, Linked list, Trees, Binary trees. Sorting and searching algorithms; algorithm design techniques: Greedy, divide and conquer, Dynamic programming, Backtracking and branch and bound.
MAL 621 Computational Methods for Ordinary Differential Equations: 4 credits (3-1-0 )
To bridge theory and practice providing sufficient theory to motivate the various methods and algorithms, yet devoting considerable attention to the practical capabilities of the method for Numerical Solution of Ordinary Differential Equations. Initial value problem for the systems of ODEs. Single step methods, Explicit and implicit, R-K methods. Linear multistep methods, Conver-genece, order, consistency and zero stability, weak stability theory, Predictor-Corrector methods. Hybrid methods. Extrapolation methods. First order systems and stiffness. LMM for special second order ODEs. Two point boundary value problem for ODEs. Finite difference method Spline methods, deffered correction and extrapolation. Methods for Sturm-Liouville problems. Computer implementation of Algorithms.
Review of simplex methods, Revised simplex method and decomposition principle for linear programming, KuhnTucker conditions, methods for solving quadratic and convex programming problems, separable programming, fractional programming, Geometric programming, Multi objective programming, variations methods.
156
M.Sc. Programmes of mathematical software likes MATHEMATICA, STATISTICA, MATLAB, UNIX Commands and other IDEs and (ii) provide hands on experience with programming on/matrix computation (Laboratory/design activites could also be included) Programming Assignments using MATHEMATICA, STATISTICA, MATLAB And UNIX Commands Computing assignments to be chosen from the following topic Matrix Computation: Matrix multiplication: traditional matrix multiplication Algorithm, Strassens algorithm; solving systems of linear equations; inverting Matrices; symmetric positive definite matrices and least squares approximation. multivariate statistical technique and use these for data analysis. Multivariate data and multivariate statistics, Principal component analysis, Cluster analysis, The generalized linear model, Regression and analysis of variance, Discrimination and classification, Factor analysis, Minor component analysis, Independent component analysis.
To update knowledge in modern cryptosystems their analysis and applications to other fields. Course contents Applying the corresponding algorithms/ programmes. (laboratory/ design activities could also be included) Classical cryptosystems, Preview from number theory, Congruences and residue class rings, DES- security and generalizations, Prime number generation. Public Key Cryptosystems of RSA, Rabin, etc. their security and cryptanalysis. Primality, factorization and quadratic sieve, efficiency of other factoring algorithms. Finite fields: Construction and examples. DiffieHellman key exchange. Discrete logarithm problem in general and on finite fields. Cryptosystems based on Discrete logarithm problem such as Massey-Omura cryptosystems. Algorithms For finding discrete logarithms, their analysis. Polynomials on finite fields and Their factorization/ irreducibility and their application to coding theory. Elliptic curves, Public key cryptosystems particularly on Elliptic curves. Problems of key exchange, discrete logarithms and the elliptic curve logarithm problem. Implementation of elliptic curve cryptosystems. Counting of points on Elliptic Curves over Galois Fields of order 2m. Other systems such as Hyper Elliptic Curve And cryptosystems based on them. Combinatorial group theory: investigation of groups on computers, finitely presented groups, coset enumeration. Fundamental problems of combinatorial group theory. Coset enumeration, Nielsen and Tietze transformations. Braid Group cryptography. Cryptographic hash functions. Authentication, Digital Signatures, Identification, certification infrastructure and other applied aspects.
The aim is to introduce students to current research in chaotic dynamical System. We begin with an analysis of the dynamic of one-dimensional maps of both the interval and the circle. Topics to be covered include chaos, elementary bifurcations. Darkovskis theorem Schwarzian derivative symbolic dynamics and chaotic behaviour. Midway we discuss higher dimensional dynamics, including special examples like horse shoe and Henon attraction.
157
M.Sc. Programmes The latter part will be devated to special topics like tent map, logistic functions, Cellular automaton. systems of linear congruences, Chinese Remainder Theorem, quadratic congruences, Quadratic Reciprocity Law, Primitive roots. Some elementary arithmetical functions and their average order, Mobius Inversion formula, Integer partitions, simple continued fractions, Definite and Indefinite Binary Quadratic Forms some Diophantine equations. innovative work in one of the areas of Mathematics, viz. Pure Mathematics, Applied Mathematics, Statistics, Operations Research, and Computer Science.
Basic objective is to introduce the mathematical option theory, asset pricing and its dynamics. Basic theory of interest, Fixed income securities, Applied interest rate analysis, Meanvariance portfolio theory, Capital asset pricing models, Derivative securities and Models of asset dynamics, Basic options theory, Optimal portfolio growth and utility based optimization, General investment evaluation.
To introduce the students to geometry of hypersurfaces. Curves in plane and space, curvature, isoperimetric inequality, surfaces in three dimensions, First fundamental form, curvature of surfaces, Geodesics, Gausss Theorem.
To encourage the students to continue the innovative work done in Project Part1 in one of the areas of Mathematics, viz. Pure Mathematics, Applied Mathematics, Statistics, Operations Research, and Computer Science.
Basic stochastic process involved in the study of mathematics of finance Regression analysis and its application to the capital asset and multifactor pricing models, smoothing techniques and estimation of yield curves; Statistical analysis of econometric modeling of financial time series; Classification and credit risk forecasting; Theory of Martingales; Martingale measures, Hedging strategies and Measurement of risk; Stochastic integration; Itos formula and stochastic differential equations; Application to option pricing models.
To develop in depth knowledge in mathematical software like MATHEMATICA, STATISTICA, MATLAB, UNIX and continue the work done in MAP 701.
: :
69 credits 06 credits
18 (12-0-12) credits
3-1-0 3-1-0 3-1-0 3-1-0 0-0-12
To expose the students to the fundamentals of Algebraic Geometry which is currently one of the most important subject in Mathematics. Commutative Algebra: Hilbert Basis Theorem and Applications, Localisation, Integral Extensions, Polynomial rings in several variables. Affine Varieties: Affine algebraic sets, Regular functions, Irreducible algebraic sets, Affine Varieties. Examples, Curves and surfaces. Projective Varieties. Fundamental concepts on Morphisms and Products. Non-singular Varieties, Tangent Spaces, Jacobian Criterion. Elliptic Curves Zariskis Main Theorem and related topics.
Total credits
Semester II PHL552 PHL554 PHL556 PHL558 PHP562 Semester PHP563 PHL565 PHL567 PHL569 PHD651 Electrodynamics Concepts of Solids Statistical Mechanics Applied Optics Laboratory II Elective (PE/OE)
22 credits
4 4 4 4 3 credits credits credits credits credits 3-1-0 3-1-0 3-1-0 3-1-0 3-0-0
Total credits
III Advanced Laboratory Cooperative Phenomena in Solids Atomic & Molec. Spectroscopy Nuclear Physics Project I Elective (PE) Elective (OE/PE)
25 credits
4 4 4 4 4 4 4 credits credits credits credits credits credits credits 0-0-8 3-1-0 3-1-0 3-1-0 0-0-6 3-0-0 3-0-0
Total credits
Semester IV PHD652 Project II Elective (PE) Elective (PE) Elective (PE) Elective (OE/PE)
25/28 credits
4 4 4 4 4 credits credits credits credits credits 0-0-12 3-0-0 3-0-0 3-0-0 3-0-0
To introduce students to the basic concepts in the Theory of Number, amalgamating classical results with modern techniques using algebraic and analytic concepts. Congruences: Some elementary properties and theorems, linear and
Total credits
18/20 credits
158
M.Sc. Programmes
PROGRAM ELECTIVE COURSES Stream A PHL653 Semiconductor Electronics PHL654 Experimental Methods PHL702 Science & Techn. of Thin Films PHL723 Vacuum Science & Cryogenics PHL725 Physics of Amorphous Materials PHL726 Nanostructured Materials Stream B PHL655 PHL755 PHL758 PHL790 PHL791 PHL792 Stream C PHL656 PHL657 PHD658 PHL741 PHL742 PHL743 PHL744 NOTE: Laser Physics Statistical & Quantum Optics Theory & Applic. of Holography Integrated Optics Fiber Optics Optical Electronics Microwaves Plasma Physics Mini Project Quantum Electrodyna mics & Particle Physics General Relativity & Introductory Astrophysics Group Theory & its Applications Advanced Topics in Quant Mech.
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
credits credits credits credits credits credits credits credits credits credits credits credits credits credits credits credits credits credits credits
3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 3-0-0 0-0-6 3-0-0 3-0-0 3-0-0 3-0-0
Laplace partial differential equations; Integral equations; Fredholm and Volterra equations; Greens functions, applications of Greens function in Quantum Mechanics and Solid State Physics; Conformal mapping and its applications; Cartesian tensors with applications in Physics.
Students are required to take at least one course from each of the streams. Students are NOT allowed to take M.Tech. SSM, AO, OE courses as Open Electives. Selected Topics # Special Topics # Independent Study # 4 credits 4 credits 4 credits 3-0-0 3-0-0 3-0-0
# Independent Study and Selected Topics will be permitted in Semester III or IV only. Students with CGPA of 8.0 and above will be permitted to do this course. It will be counted against a stream depending on the theme of the topics covered in the course.
Constraints, Newtons equation with constraints, virtual work, generalized co-ordinates, Lagranges equation, cyclic co-ordinates, conservation laws. Basics of calculus of variations, Variational principles and Lagranges equation. Hamiltons equations, Liouville theorem. Canonical transformations. Poisson brackets, Liouville equation, Gibbs ensemble. Central force, Keplers problem. Scattering of particles in a central force field, Rutherford formula. Non-inertial frames, Coriolis force, rigid body motion, Euler angles, Eulers equations. Non-linear oscillations, Fourier series expansion and methods of perturbations, successive approximation, phase space analysis stability of fixed points, period doubling bifurcations and chaos. Continuous system. Lagrangian formulation, Stress-tensor, Hamiltonian formulation, Poisson brackets. Classical fields, Noethers theorem.
magnetostatics, boundary value problems using Laplaces equation, Maxwells equations for time varying fields, polarization and conductivity, plane waves in dielectrics and conductors, wave propagation in plasmas, reflection/refraction, critical reflection, surface waves and medium frequency communication, waveguides, transmission lines, dipole antenna, antenna array, Rayleigh scattering, Postulates of special relativity, Lorentz transformations, 4vectors, interval, 4-momentum, massenergy equivalence, relativistic covariance of Maxwells equations, Lienard-Wiechert potentials, radiation from accelerated charges, appli-cations to communication and radar.
and
159
M.Sc. Programmes and statistical ensembles, microcanonical, canonical and grand canonical ensembles; method of calculation using the ensemble approach and its applications to classical systems; density matrix formalism; quantum statistical mechanics and its applications to bosons and fermions; thermodynamics of phase transition in a Van der Waal system, statistical mechanics of magnetic phase transitions. Electrodynamics and Electronics will form the practical contents of this course. mass formula, Nuclear force and two nucleon system, Nuclear models, Gamows theory of a-decay, Fermis theory of b-decay, Electromagnetic transitions in nuclei multipole radiation, Nuclear fission. Nuclear reactions, particle accelerators and detectors, Subnuclear degrees of freedom: Symmetries of elementary particle physics, Quark model, Bag model, Introduction to QCD and Quark-gluon plasma (Qualitative).
PHD 651 Project I: 3 credits (0-0-6) PHD 652 Project II: 6 credits (0-0-12) PHL 653 Semiconductor Electronics: 3 credits (3-0-0)
Semiconductors junction review; charge storage and transient behavior, equivalent circuit of diode, p-n hetrostructure: band discontinuity and its effect on junction properties; Junction breakdown mechanisms; Static characteristics of Bipolar transistor; Frequency response and switching behavior, Non-ideal effects: base width modulation, early effect, current crowding and high injection effect; Hetro-junction transistor; SCR, M-S junctions: Basic structure, Energy band relation, I-V characteristics; Ohmic contacts; MOS capacitors, JFET and MESFET basic principles, MOSFET: structure and operation, basic characteristics and analysis; linear quadratic models; equivalent circuit; Threshold voltage calculation; Substrate biasing effect; LED, Laser, Photodiode and solar cells, Tunnel, IMPATT & Gunn diodes and comparison of microwave devices.
160
M.Sc. Programmes Simulated Current; C-V and Admittance Spectroscopy; Hall effect and Time of Flight methods for charge carriers, Differential scanning calorimeter; Differential Thermal Analyzer. production & characterization, Plasma processing of materials, Laser driven fusion, Cerenkov free electron laser, Applications to astrophysics and astronomy. the metric tensor and geodesics, Curvature, Reimann Tensor and its properties, Energy Momentum tensor, Ricci Tensor and Einstein tensor and the Einstein Equations. Newtonian limit. Schwarschild solution and its consequences. Experimental tests of the solution, Mercurys orbit, red shift, Shapiro Delay light deflection, Reissner Nordstrom and weak field solutions of the Einstein Equation. Homogeneous and isotropic universes. Freidman Cosmologies, Evolution of the Universe into its present state and experimental tests of the theory Gravitational lensing and experimental observations thereof. Gravitational waves, their physical properties and the motion of a test particle in a gravitational field. Gravitational wave detectors.
PHL 661 Selected Topics: 3 credits (3-0-0) PHL 662 Special Topics: 3 credits (3-0-0) PHL 741 Quantum Electrodynamics and Particle Physics: 3 credits (3-0-0)
Dirac equation, plane wave solutions, Foldy-Wouthusen transformations, Smatrix, Classical fields, equations of motion, conserved quantities, Quantization of complex scalar, electromagnetic and spinor fields, The interaction Hamiltonian, normal and chronological products, Wicks theorem, Feynmans rules and diagrams: electron scattering by an external em field, electron-photon scattering, pair creation, current form factors, Cross-sections, traces, scattering of electrons and p-mesons of a nucleon, decay processes, Renormalization, one-loop correction, electron self-energy, vacuum polarization, Parity, Charge conjugation, Time reversal invariance, CP violation and CPT theorem, SU(2) of Isospin, SU(3) of color, Quark model of hadrons: SU(3) of flavor, Isospin and strangeness, baryon octet, meson octet, magnetic moments of baryons, electron-proton scattering proton form factors, Inelastic e-p scattering structure functions, partons and Bjorken scaling.
161
LIST OF COURSES CORE MODULE Core Courses SML 710 SML 720 SML 730 SML 731 SML 740 SML 745 SML 760 SML 770 SML 780 SMP SMV SMV SMV SMV SMV 791 793 794 795 895 896 Creative Problem Solving 3 credits Business Environment and Corporate Strategy 3 credits Organisation Management 3 credits Human Resources Management 3 credits Quantitative Methods in Management 3 credits Operations Management 3 credits Marketing Management 3 credits Managerial Accounting and Financial Management Managerial Economics Computer Laboratory Statistics for Management Communication Skills Systems Thinking Management Research Methodology Human Values in Management 3 credits 3 credits 1 credit 1 credit 1.5 credits 1 credit 1 credit 1 credit (2-0-2) (2-0-2) (3-0-0) (3-0-0) (2-0-2) (3-0-0) (2-0-2) (2-0-2) (2-0-2) (0-0-2) (1-0-0) (1-0-1) (1-0-0) (1-0-0) (1-0-0)
162
Management Studies
FOCUS MODULE- TECHNOLOGY MANAGEMENT Core Courses SML 700 SML 701 SML 702 SML 703 Fundamentals of Management of Technology Strategic Technology Management Management of Innovation and R&D Management of Technology Transfer and Absorption 3 credits 3 credits 3 credits 3 credits (3-0-0) (2-0-2) (2-0-2) (2-0-2)
development, explaining views on strategy development. Industry and Competitive Analysis, Generic Competitive Strategies, Offensive strategies, Defensive strategies, Vertical integration strategies, Flexibility in strategy. An overview of strategy formulation process, vision, mission, objectives.
Technology Management -Electives (To be opted under Elective Module I) SML 704 SML 801 SML 802 SML 804 Science and Technology Policy Systems Technology Forecasting and Assessment Management of Intellectual Property Rights Technical Entrepreneurship 3 credits 3 credits 3 credits 3 credits (3-0-0) (2-0-2) (3-0-0) (3-0-0)
FOCUS MODULE - MANAGEMENT SYSTEMS Core Courses SML 713 Information Systems Management 3 SML 715 Quality and Environment Management Systems 3 SML 716 Fundamentals of Management Systems 3 SML 717 Business Systems Analysis and Design 3 Management Systems- Electives (To be opted under Elective Module I) SML 714 Organisational Dynamics and Environment SML 811 Management Control Systems SML 812 Flexible Systems Management SML 813 Systems Methodology for Management SML 815 Decision Support and Expert Systems SML 819 Business Process Reengineering credits credits credits credits (2-0-2) (2-0-2) (3-0-0) (2-0-2)
3 3 3 3 3 3
credits credits credits credits credits credits credits credits credits credits
(3-0-0) (3-0-0) (2-0-2) (2-0-2) (2-0-2) (2-0-2) (3-0-0) (3-0-0) (3-0-0) (3-0-0)
FOCUS MODULE - TELECOM SYSTEMS MANAGEMENT SML 723 Telecommunication Systems Management 3 SML 726 Telecom Systems Analysis, Planning and Design 3 SML 728 International Telecommunication Management 3 EEL 767 Telecommunication Systems 3 SPECIALIZATION-STRATEGIC MANAGEMENT SML SML SML SML SML SML SML SML SML 820 821 822 823 824 825 826 827 829 Global Business Environment Strategic Management International Business Strategic Change and Flexibility Policy Dynamics and Learning Organization Strategies in Functional Management Business Ethics International Competitiveness Current and Emerging Issues in Strategic Management 3 3 3 3 3 3 3 3
3 credits
SPECIALIZATION-ORGANISATION MANAGEMENT SML 830 SML 831 SML 832 SML 833 SML 835 Organisational Structure and Processes Management of Change Managing Innovation for Organisational Effectiveness Organisation Development Labour Legislation and Industrial Relations 3 credits 3 credits 3 credits 3 credits 3 credits (3-0-0) (2-0-2) (3-0-0) (3-0-0) (2-0-2)
163
Management Studies
SML 839 HUL 710 SML 840 SML 843 SML 844 SML 845 SML 846 SML 849 MEL 661 MEL 783 MEL 852 SML SML SML SML SML SML SML 815 850 851 852 855 857 859
Current and Emerging Issues in Organisation Management Personality Structure and Dynamics Manufacturing Strategy Supply Chain Logistics Management Systems Reliability, Safety and Maintenance Management Total Project Systems Management Total Productivity Management Current and Emerging Issues in Manufacturing Management Materials Management Automation in Manufacturing Computer Integrated Manufacturing Systems Decision Support and Expert Systems Management of Information Technology Database Design and Data Management Network Systems: Application & Management Electronic Commerse Database Management Information System Current and Emerging Issues in Information Technology Management Market Research Product Management Advertising and Sales Promotion Management Sales Management International Marketing Industrial Marketing Management Current and Emerging Issues in Marketing
3 credits 3 credits 3 credits 3 credits 3 credits 3 credits 3 credits 3 3 4 3 3 3 3 3 3 3 credits credits credits credits credits credits credits credits credits credits
(3-0-0)* (2-1-0) (3-0-0) (3-0-0) (3-0-0) (2-0-2) (3-0-0) (3-0-0)* (2-0-2) (3-0-2) (2-0-2) (2-0-2) (3-0-0) (2-0-2) (3-0-0) (2-0-2) (3-0-0) (3-0-0)* (2-0-2) (3-0-0) (3-0-0) (2-0-2) (3-0-0) (3-0-0) (3-0-0)* (3-0-0) (2-0-2) (2-0-2) (3-0-0) (3-0-0) (3-0-0) (3-0-0) (3-0-0)*
SPECIALIZATION-MANUFACTURING MANAGEMENT
3 credits 3 credits 3 credits 3 credits 3 credits 3 credits 3 credits 3 credits 3 3 3 3 3 3 3 3 credits credits credits credits credits credits credits credits
SPECIALIZATION-MARKETING SML 861 SML 862 SML 863 SML 865 SML 866 SML 867 SML 869
SPECIALIZATION-FINANCE SML 811 Management Control Systems SML 870 Advanced Financial Management SML 871 Accounting for Decision Making SML 872 Working Capital Management SML 873 Security Analysis and Portfolio Management SML 874 Indian Financial System SML 875 International Financial Management SML 879 Current and Emerging Issues in Finance
SPECIALIZATION-PUBLIC SECTOR MANAGEMENT SML 881 Management of Public Sector Enterprises in India 3 credits SML 889 Current and Emerging Issues in Public Sector Management 3 credits SPECIAL IZATION-CONSULANCY MANAGEMENT SML 822 International Business SML 833 Organisation Development SML 845 Total Project Systems Management SML 897 Consultancy Process and Skill SML 898 Consultancy and Professional Practices SML 899 Current and Energing Issues in Cohnsultancy Management 3 3 3 3 3 credits credits credits credits credits
3 credits
164
Management Studies
OPENELECTIVES SML 734 Management of Small Scale Industrial Enterprises SMP 783 Management Laboratory SML 816 Total Quality Management SML 817 Management of System Waste SML 818 Industrial Waste Management SML 880 Selected Topics in Management (Open Slot to float any new course) SML 887 Business Law HUL 762 Industrial Economics HUL 738 International Economics CSL 672 Computer Network CSL 740 Software Engineering Electives from Focus Modules and Specialisation Streams.
3 3 3 3 3 3 3 3 3 4 4
credits credits credits credits credits credits credits credits credits credits credits
(3-0-0) (0-0-6) (2-0-2) (2-0-2) (2-0-2) (2-0-2) (2-0-2) (3-0-0) (3-0-0) (3-0-2) (3-0-2)
Module II: Cost concepts. Cost-VolumeProfit (CVP) relationship and Profit Planning. Budgeting. Full Costing and Variable Costing methods. Cost analysis for Decision- Making. Standard Costing and Variance Analysis. Cases and Problems. Module III: Long-term Investment Decisions: Developing relevant data, Time Value of Money, Cost of Capital, Determination of Working Capital, Techniques of Capital Budgeting decisions, Capital rationing. Cases and Problems.
(Minimum one elective is to be opted from the Focus Area of the programme or from the other Focus Area). PROJECT SMD 792* Minor project SMD 890* Project *(only for those students registered at DMS) INDUSTRIAL TRAINING/SEMINAR (Non-credit requirements) SMT 893 SMC 894 Note: 1. All credit courses are of three credits each. The details of non SM Courses are available under the respective Department/Centre. In addition to above some more courses may be available, details of which may be had from the Department of Management Studies. The students of focus module "Telecommunication Systems Management" should contact the Dept. of Management Studies before taking the courses. Module III: Implementation and Control. The marketing organization- alternative organization structures; the concept of product management. Administration of the marketing programme: sales forecasting; marketing and sales budgeting; sales management; management of sales force. Evaluation of marketing performance; sales analysis; control of marketing effort; marketing audit. Industrial Training Seminar 3 credits (0-0-6) 6 credits (0-0-12)
2.
165
Management Studies
base Packages. Appreciation to special packages for Management Research (SPSS, Dynamo, OR Packages, Expert Choice).
shared vision of value. Ingraining practical ideals. Human technology. Fundamental human pursuits. Importance of action and the technique of right action. Values for effective managers. Specific problem areas: stress, motivation, quality, and leadership, Quality of life. Enlightened and liberated organisation.
technology management process, relationship between technology strategy and corporate strategy. Strategic shifts and resource commitments, technology vision and goals, technology leadership. SWOT analysis for technology, Matching Business Portfolio and Technology Portfolio, TechnologyMarket matrix. Innovation and entry strategy, Flexibility in Technology strategy. Module III: Business/technology alliances and networks. Technology forecasting and assessment. Technology strategy at business level. Strategic Technology Planning, Investment in Technology, Technology Strategy and functional strategy. Implementation and Control of technology strategy, Managing Corporate culture, structure, and interdepartmental linkages.
Module I: Understanding technology: definition, Key concepts, role, importance, need. History of technological developments, Todays challenges. Issues of concern in Management of New Technology. Technology-Management integration, Life cycle approach to technology management. Technology innovation process. Managing and fostering the Innovation. Module II: Technology forecasting and assessment. Technology flow and diffusion. Evaluating technology, technology planning and strategy, Strategic potential of new technology. Environment impact study. Factors promoting technology acquisition. Flexibility in Technology Management. Technology transfer and absorption, Modes of global technology transfer. Technological Entrepreneurship. Module III: Managing productivity and quality in technology age. Technology implementation. Integrating people and technology, human factors in technology operations. Organisation structure and technology. Investing for technological maintenance and growth. Concern of phasing out and upgradation. Market factors in technology operations, Science and Technology Policy, Technology support systems. Information networking for technological updatedness.
Module I: Emerging technology-strategy relationship in the large corporation from the perspective of individual firm, and entire industry. Global technology comparison, technological change, sources of technology, Technology Information. Criticality of technology for growth, core competencies, R&D productivity, Resource Leverage. World Class Organisation. Module II: Corporate technology strategy, Generic competitive technology strategies. Corporate R&D, Strategic
166
Management Studies
R&D to field and at international level. Commercialization of new technology and new venture management, prototyping, test marketing, pilot plant, project viability, Technology push and market full. Quality management, customer education and awareness. Assessment, justification and financing of new technology, source of funds, venture capital financing. New venture products and services. Module II: Global transfer of technology, Technology transfer models: Active, passive. Multi channel approach: from hardware technical services acquisitions to strategic partnering and networking arrangements. Sourcing technology, technology negotiation, licensing agreement. Fee for technology transfer, royalty, equity participation. Modes: technological collaboration, joint venture, alliance, acquisition. International S&T cooperation: institutional framework, multilateral/ bilateral cooperation, pre-emptive R&D cooperation. Module III: Absorbent Strategy: Japanese technology absorption, Technology Absorption: product and process technologies, Reverse engineering. Appropriate technology. Vendor development. Adaptation and assimilation of technology.
Module III: Support Systems: Technology infrastructure, technology parks, Technology development and utilization schemes by government and Financial Institutions, Venture capital financing, TIFAC, Technology mission, Standards, Support to Small scale sectors. Research laboratories, and institutions. S&T in five year plans, Fiscal incentives. Organization set up for Science and Technology. R&D in corporate sector.
Module III: Systems for managing continuous and radical change for organizational renewal and transformation. Adaptiveness and flexibility in organisational systems. Systems for managing collective action within the organization. Feminism and organizational systems for managing gender diversity.
167
Management Studies
Human Resources Planning and Management. Module III: Methodology for developing Management System. Optimization and Learning Systems methodologies, Microworld, Continuous Improvement and Reengineering of Management Systems. Organizing to improve systems.
Module III : Telecom marketing, building brand equity for competitive advantage, Customer care, total service quality management, preparing for the new millennium managing change and people development.
SML 726 Telecom Systems Analysis, Planning, and Design: 3 credits (3-0-0)
Module I : An introduction to the basic system analysis tools, the procedures for conducting system analysis advanced software principles, techniques and processes for designing and implementing complex telecommunication systems. Module II : Planning and implementation of telecommunications systems from strategic planning through requirements, the initial analysis, the general feasibility study, structured analysis, detailed analysis, logical design, and implementation. Module III : Current system documentation through use of classical and structural tools and techniques for describing flows, data flows, data structures, file designs, input and output designs, and program specifications. The student would gain practical experience through a project as part of a term paper.
168
Management Studies
Marketing plan, Financial plan, Organisational plan. Financing a new Venture: Sources of Capital, Venture Capital, Going public. Module III: Managing the new technological venture: Developing systems in new venture, Managing doing early operations, Growth and expansion, ending the venture. Legal issues, Franchising or acquisition, Entrepreneurship, International Entrepreneurship.
manufacturing flexibility, organisational flexibility, financial flexibility, and strategic flexibility. Linkage of flexibility with organisational performance.
rationale of Business Process Reengineering, Reengineering scenarios in major countries, Problems issues, scope and trends in BPR, Implementing BPR: Methodology and steps, IT enabled reengineering, mediation and collaboration. Module II: The paradigm of Mass customization, managing organisational change, Transforming/ Reinventing the enterprise, Team building. Case studies of success as well as failure. Module III: People view, empowering people, reengineering management. Issues of purpose, culture, process and performance, and people.
169
Management Studies
analysis, core competencies, culture and stakeholder expectations. Module II Strategy Formulation. Strategic Intent, Vision, Mission and objectives. Strategic architecture, crafting a strategy. Alaternate directions for strategy development. Alternate methods for strategy development: Portfolio analysis, life cycle analysis, value chain analysis, culture fit, screening strategic option, Analysing return risk and feasibility, selection of strategies. Module III Strategy Implementation. Implementing strategy: Core competencies, Budgets, Policies, Best practices, Support Systems, Rewards. Culture and Leadership, Functional strategies.
Dynamics modeling applied to policy formulatins, conceptual model. The language of systes thinking links and qualitative system dynamics, Flexibility Influence Diagram, Collaboration Diagram, Archetypes, leverage points, Integrative simulation models. Module III Frontiers. Role playing games and case studies to develop principles for successful management of complex strategies in a dynamic world. Strategic Management game for policy planning, Interactive Planning. Strategic issues such as business cycles, market growth and stagnation. And diffusion of new technologies. Knowledge management in learning organizations.
170
Management Studies
Module III Ehtics in Functions. Ethical responsibilities of organizations leader: power, leadership. Obstacles to ethical conduct. Pressures for conformity. Evaluation and rewards. Job pressures and issues. Organizational change. Ethics in use of Informatrion technology. Intellectural Property Rights. Ethics in Marketing. Ethics of advertising and sponsorship. Freedom Vs State Control. Acquisitons and Mergers, Multinational decision making: Reconciling International norms.
Module III: Interface of structure and processes- structural functionalism of Talcott Parsons; Allport and EventStructure theory. Organizational Governance- organizations as a subject of political enquiry, Models of organizational governance. Making and breaking patterns.
techniques of organizational diagnosis for improving organisations problem solving and renewal process. Module II: Coping with environmental change. Socio-cultural dimensions of work and behaviour, Environmental analysis and impact. Diagnosis of the ongoing process from symptoms to cause. Organistion development and intervention strategies. Module III: Personal change. Laboratory learning techniques. Managerial Grid. Sensitivity training. Transactional analysis. Inter-group and team building interventions. Management by objectives. Total system interventionsstabilising of change.
SML 829 Current and Emerging Issues in Strategic Manage-ment: 3 credits (3-0-0)
(Relevant current and Emerging Issues)
SML 839 Current and Emerging Issues in Organisation Management: 3 credits (3-0-0)
(Relevant current and Emerging Issues)
171
Management Studies
Module II: Technology-manufacturing process interfaces with marketing, engineering, quality, purchasing, finance and accounting. Inter-relationship among manufacturing manager and their suppliers, customers, competitors, superiors and production workers. Module III: Strategic implications of Experience Curve. Focused manufacturing-green lean and mean. Strategic issues in project management and implementation of manufacturing policies. Perspectives of Manufacturing Strategy. Case Studies.
Introduction to reliability, availability and safety engineering and management. Select statistical concepts and probability distributions. Optimization techniques for systems reliability, availability and safety. Reliability, availability, safety and maintainabilty. Risk assessemtn and management for reliability and safety. Module II: Maintenance Planning and Conctrol. Maintancne management objectives and functions. Classification of Maintenance system. Maintenance Planning and Scheduling. Issues of Relplacement versus reconditioning and imperfect repair maintenance models. Spare parts Inventory Planning and Control for single and multi-echelon systems. Diagnostic tools of failure analysis: Failure Mode Effect and Criticality Analysis, Fault Tree Analysis. Module III: Information System for Reliability, Safety and Maintenance Management. Organizational aspects and a computer aided management information system for reliability, safety and maintenance. Life cycle costing and cost management for maintenance. Human factors in maintenance, Maintenance Manpower Planning. Case Studies.
management. Pricing, estimating, and Contract Administration, Building and Bid evaluation and analysis. Project implementation and monitoring, Project management information and control systems. Project systems management performance indices. Software Packages application for Project Systems Management. Case studies.
Module I Perspective of Supply Chain Logistics Management. Logistics concept, role and scope; Logistics Environment- Integrating Logistics of Supply, Logistics of Production and Logistics of Distribution. Internal and external factors for logistics strategy, Operational Resources of logistics (personnel, warehouse means of transport, warehouse transport aids, organizeational aids, material stocks, and area/spare) Effective supply chain management, customer networking and manufacturing, Risk Pooling, Postonement, cross docking in supply chain. Module II: Logistics Activity Mix. JIT and Logistics, Synchronised manufacturing. Purchasing and Materials Management. Distributional logistical systems and facilities-single stage or multistage, warehouse(s), their number, locationa dnd allocation, Automated Warehousing, Materials Handling and Packaging. Simulation aided planning of conveyor and warehousing systems. Module III: Supply Chain Logistics Mix Management.
Logistical Connnectiveity: Transporation modes, rate structure, legal aspects; maintenance, spares and repairs; test and support equipment, Routing of freight flows. Management and Organization of the Logistics Systems; Organization, Information and cost control; Logistical information Systems, Computer aided logistics management. Case Studies.
SML 849 Current and Emerging Issues in Manufacturing Management: 3 credits (3-0-0)
(Relevant current and Emerging Issues)
SML 859 Current and Emerging Issues in Information Technology Management: 3 credits (3-0-0)
(Relevant current and Emerging Issues)
SML 844 Systems Reliability, Safety and Maintenance Management: 3 credit (3-0-0)
Module I: Reliability, Safety, Risk Assessment Perspective.
172
Management Studies
Emerging information technologies: IT for competitive advantage; IT for internal effectiveness; IT for inter- organizational linkage;Module II Strategy Development and Planning Techniques. IT Planning (CSFs, Scenario analysis, Linkage analysis, Enterprise modeling); Strategy formulation techniques; Nolans stage model and revised models for Nolans stages; IT investment decisions; methods for evaluating IT effectiveness; IT enabled business process redesign. Module III Strategic Issues Related to IT management. Relating IT to organizational leadership, culture, structure, policy and strategy; programmer productivity; Managing legacy systems; evaluating centralization- issues; IT-forecasting.
DNA, Internetworking; network applications- EDI, Email, file transfer, conferencing, Enterprise networking. Module II: Networking technologies and applications. Design and development of enterprise network; Web-based application development, Desing of large-scale intranets, Network and systems management issues, Remate access to computer resources, Network and system security. Module III: Managing networks. Preparing for doing business on the internet; Choosing and costing networks and network services; network management requirements; network performance indicators; performance monitoring.
private information (Secure sockets layer (SSL) and Secure electronic transaction (SET)]. Electronic Payment Systems : First virtual internet payment system, cyber cash. Digital Currencies : Basics, eCash, Smart cards. Re-intermediation at work, intelligent agents, datamining tools. Module III: Setting up a e-business (Legal Commercial Framework). Strategy for setting up a web site, creating commercial web site, shopping agents. Taxation implication of i-commerce : Income tax, sales tax, tax reforms and trade policy, Action and gambling on Internet. Ethics and legal issues : cyber laws.NP Future trends : Convergence of tech nolo-gies, Virtual concepts, Government internet commerce.
173
Management Studies
research. The marketing decisionmaking process and the place of different types of research. Types of marketing problems and type of marketing research activity. Sources of data; use and appraisal of existing information. Module II: Information from respondents, sampling design, scaling techniques and questionnaire design, interviewing, mail surveys. Information from experiment, experimental design for marketing, Motivational research, Advertising research, Statistical Analysis and reporting. Module III: Marketing Information Systems, Structure and design, its role in planning and control; the place of marketing research.
advertising. Sales Promotion, Publicity and Public Relations- Scope, Objectives, activities and creative role. Advertising, objectives tasks and process market segmentation and target audience- Message and copy development. Mass media, selection, planning and scheduling. Integrated programme and budget planning. Implementing the programme, coordination and control. Advertising Agencies in India, their services and terms, Agency selection and appointment; Agency Organization and operation, Getting the best of the agency services. Analysis of effectiveness of advertisement and promotional compaign. Module II Why and when sales promotion support, Sales promotion activities; consumer Oriented Sales channel oriented-sales staff oriented, Planning, budgeting, implementing and controlling campaigns. Module III Valuation and measurement of advertising and sales promotion effectiveness, Company organization for advertising: sales manager, Sales Promotion Manager, Market Development Manager- Role of Tasks, advertising ethics, economics and social relevance. The Public Relations Activities, Public relations and mass media.
Methods and the selection system. Distribution and chamel selection & main agancies. Module III: Operational Management, Staffing: Its advantages, responsibility for staffing, tools and methods of selection. Sales training: Its objectives, programme content, Methods of training concepts of territorial management for field sales force. Measurement and control: General considerations governing evaluation and sales performance and control; the Managerial process of sales control.
174
Management Studies
targets, fact finding training); sales communications. Module III: Marketing Research. Marketing control (variance analysis audit). Industrial purchase behaviour and processes, new product launch.
versus , Selling at below normal price, pricing special orers. Case and Problems. Module II: Product Decisions: Make or Buy, Sell Now or Process Further, Operate or Shut-Down, Addition/ Discontinuation of Product Lines/ Divisions/Departments: Product Mix Decisions with Input Constraints(s), with and without samples Constraints. Decisions Relating to Disposal of Inventories. Cases and Problems. Module III: Restructuring Decisions: Decisions relating to Investment in a New Project and New: Technology> Choice of Method of production. Restructuring and Expansion Decision. Mergers and Acquisition/Takeover. Cases and Problems.
Markets, Markets and Brokers. Sources of investment information. Tax incentives. Theoretical framework for investment Decision. Forecasting of future earnings, Concepts of Sustainable Earnings, Rating, Index. Interest Rate Structure and Yield to Maturity Curve. Regulatory Framework of Securities Markets in India. Practical Problems. Module II: Valuation of Securities. Valuation of Variable Income Securities (Equity Shares): Theory of ValuationEarnings and Dividend Model: Aggregate Economic Analysis, Industry Analysis, Fundamental Analysis, Technical Analysis, Growth Shares, Under and Overvalued Shares. Analysis of Fixed Income Securities like Preference Shares, Debentures/Bonds and other Financial Instruments Convertible Bonds: Warrants and Options, Practical Problems. Module III: Portfolio Management: General principles. Measures of Risk and Return, Required Rate of Return and CAPM Markkowitz Portfolio Theory. Efficient Capital Market Theory. Alternative Efficient Market Hypotheses. Constructing the Optimum Portfolio. Practical Problems.
Module I: Overview Of Indian Financial System. Role of Financial Markets in capital formation and economic development; Indian Financial system- An overview. Commercial Banks and Industrial Finance- evolving role. Reserve Bank of India as a Regulator of Banking System and its other functions. Module II: Financial Markets: Money Market Organization in Indianature, constituents and instruments. Industries Securities Market in India: New Issue Market and Stock Exchange. Differences and similarities, functions, methods of New Issues, Regulatory Frame. Module III: Mutual Funds and Banking Sector. Investment Policy and performance appraisal of Unit Truest of India and other Mutual Funds. Management of Bank Funds. Development BanksOperational and Allocation efficiency; New developments.
175
Management Studies
Module I: Foreign Exchange Market and Risk Manage.nd Financial Institutions. Practical Problems. Module III: Financial Management of MNCs. Multinational Financial Management: Capital Budgeting Decisions for Multinational Corporation, Financing Decisions- Cost of Capital and Financial Structure, Working Capital Management and Control International Banking, International Transfer Pricing. Cases and Problems.
problems and prospects in the Indian environment. Practical aspects of setting up and running of industries including formulation of projects, feasibility study for new projects. Module II: Raising resources for new enterprises. Location, design, product and process. Choice of technique in small business. Survey needs for growth of the enterprise. Monitoring to avoid sickness. Development and diversification. Module III: Integration with medium and large sector considerations. Informations network for new enterprises. Implication of WTO to SMEs. Globalisation & Competitiveness of SMEs.
Employee Involvement; Problem Solving in TQM- Brain storming; Nominal Group Technique Team process; Kaizen and Innovation; Measurement and audit for TQM; Quality Information Systems, ISO 9000 series of Quality Standards; TQM Implementation; Reengineering and TQM.
SML 889 Current and Emerging Issues in Public Sector Management: 3 credits (3-0-0)
(Relevant current and Emerging Issues)
176
Management Studies
manpower waste in industry, absenteeism. Capacity utilization. Waste heat recovery and energy waste in industry. Resource conversation/loss prevention in process industries. Data and information waste, management of hazardous waste. Waste treatment. Natural calamities. Accident prevention, industrial safety and waste management.
Offer and acceptal contract over the telephone. Module II: Contract of Sale of Goods. Definition and essentials of a contract of sale Distinction between and agreement to sell, sale and hire purchase, sale distinguished from contract for work and labour. Kind goods, effect of perished goods. Document to the title of goods. Rules regarding transfer of proper Transfer of Title on sale. Rules regarding delivery of goods. Buyers rights against celler, and Right onpaid seller. Module III: Negotiable InstrumentDefinition and characteristic of Negotiable instrument. Liabilities of Partie Negotiable Instruments. Law of Arbitration-Definition of Arbitration, Effect of an arbitration. Arbitra without Intervention of Court. Power of Arbitration. Duties of Arbitrators, Brief exposure of Companies Consumer Production legislation and Environmental Legislation.
Implementation and Termination/ Closing; Module III :Methods of selection of consultants, Costs and fee calculation, Preparation of Consultancy proposals and Agreements, Technical Report Writing and Presentation.
Module III: Waste management in Indian industries- present practices, potentials and perspectives. Management of waste in different industrial systems- steel, aluminum,
power, automobile, transport and other service industries. Economic analysis and system models of industrial waste management systems. Analytical and Creative techniques to waste control.
Module I : Negotiation Skills, Professional Ethics and Code of Conduct. Managing a Consultancy firmfundamentals of consulting firm management, consulting firms and IT in conslting firms, management of consulting assignments. Module II : Consulting in variou areas of Management-Consulting in general and strategic manageent, consulting in financial management, consulting in marketing and distribution management, consulting in production and operation management, consulting in HRM, consulting in IT. Module III : R&D-Consultancy relationship, Careers and Compensation in Consulting, Training and development of Consultants, Future Challenges and Opportunities in Consultancy.
SMD 792 Minor Project: 3 credits (3-0-0) SML 887 Business Law 3 credits (2-0-2)
Module I : Nature of Business law, Sources of Business law and their classification. Mercantile law, Statue I Case law, Customs and Usage. Agreement and their legal obligations. Essential elements of a valid contr Kinds of contact-Void and voidable contract. Uniforceable and illegal agreements.
SML 899 Current and Emerging Issues in Consultancy Management: 3 credits (3-0-0)
177
178