Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
59 views

Overview of DSB-SC, DSB-LC and SSB: Zeeshan Tallat (156) Taimur Saeed (133) Asad Mahmood

This document provides an overview of different modulation techniques: DSB-SC modulates the carrier amplitude with the message signal and has 100% efficiency but requires coherent detection. DSB-LC also modulates the carrier amplitude but is less efficient since it wastes carrier power. SSB transmits only one sideband to improve spectral efficiency but is difficult to generate and demodulate. SSB+C adds a carrier to SSB to allow envelope detection but has very low efficiency.

Uploaded by

Asad Mahmood
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
59 views

Overview of DSB-SC, DSB-LC and SSB: Zeeshan Tallat (156) Taimur Saeed (133) Asad Mahmood

This document provides an overview of different modulation techniques: DSB-SC modulates the carrier amplitude with the message signal and has 100% efficiency but requires coherent detection. DSB-LC also modulates the carrier amplitude but is less efficient since it wastes carrier power. SSB transmits only one sideband to improve spectral efficiency but is difficult to generate and demodulate. SSB+C adds a carrier to SSB to allow envelope detection but has very low efficiency.

Uploaded by

Asad Mahmood
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 12

Overview of DSB-SC, DSBLC and SSB

ZEESHAN TALLAT TAIMUR SAEED ASAD MAHMOOD


CLASS : BEE-2D

(156) (133) (026)

AMPLITUDE MODULATION
In amplitude modulation (AM), the amplitude of the carrier is proportional to the message signal.

DSB-SC

m(t)cos2fct

1 [M(f 2

+ fc) + M(f - fc)]

Upper sideband (portion outside fc) Lower sideband (portion inside fc) If message signals BW is B hz, then modulated signal has a BW of 2B hz. Modulated signal does not contain a discrete component of the carrier frequency.

DSB-SC (cont.)
To avoid overlapping of modulated spectra, fc B fc / B >> 1 to avoid distortion caused by transmit antenna in broadcast. Synchronous detection (coherent detection) method is used for demodulation.

DSB-SC (cont)

E(f) = M(f) +

1 2

1 [M(f 4

+ 2fc) + M(f - 2fc)]

Low pass filters will recover M(f), which is the baseband (message) signal. To remove factor of , use 2cos2fct as carrier. Efficiency = = 100 %

DSB-LC

LC(t) = [A + m(t)] cos2fct

LC(t)

1 [M(f + fc) + M(f - fc)] 2 [(f + fc) + (f - fc)] 2

Rectifier detection or envelope detection may be used for demodulation. For envelope detection to properly detect baseband signal

I. II. fc >> BW of m(t) A + m(t) 0

DSB-LC (cont.)
Major drawback is the wastage of carrier power. Useful message information resides in the sideband power. Total power is the sum of carrier (wasted) power and sideband (useful) power.

Efficiency = =

DSB-LC

For tone modulation

Efficiency = =

2 2+2

100%

max = 33% at = 1.

SSB (single sideband)


In DSB, both sidebands (upper and lower) contain complete information about the baseband signal and bandwidth = 2B hz. To improve spectral efficiency, SSB is used. Transmits either LSB or USB with bandwidth = B hz. SSB(t) = m(t)cos2fct mh(t)sin2fct mh(t) is Hilbert transform of m(t). Hilbert transform is an ideal phase

SSB (cont)
H(f) = - j sgn(f) = - j ; f > 0 and j ; f < 0 Coherent demodulation is used. Phase shift method or selective filtering method are commonly used to generate SSB signals. Drawback is the difficulty to design ideal bandpass filter. Spectral efficiency of SSB is twice that of DSB.

SSB + C
SSB signal with a carrier (SSB + C). SSB+C(t) = Acos2fct + m(t)cos2fct mh(t)sin2fct For A >> m(t), SSB+C can be demodulated by envelope detector. Efficiency is very low.

Overview
DSB-SC 100 % efficiency DSB-LC less efficient since carrier power is wasted SSB 100 % efficiency

Low spectral efficiency Low spectral density (same as DSB-SC) Difficult demodulation because of generation of same carrier frequency at transmitter and receiver

Spectral density twice than DSB

Easier demodulation Coherent i.e. envelope detection demodulation (same but A + m(t) 0 as DSB-SC) but in SSB + C envelope detector may be used when A >> m(t)

You might also like