Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Gas Turbine Power Plant

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 16

Gas Turbine Power Plant

By
Mr.B.Ramesh, M.E.,(Ph.D)
Research Scholar, CEG, Anna University, Chennai.
Associate Professor of Mechanical Engineering,
St. Josephs College of Engineering,
Jeppiaar Trust, Chennai-119



Unit III Power plant engineering
Gas turbine power plant
Gas turbine:
Working principle :

Air is compressed(squeezed) to high
pressure by a fan-like device called the
compressor.
Then fuel and compressed air are mixed
in a combustion chamber and ignited.
Hot gases are given off, which spin the
turbine wheels.
Most of the turbines power runs the
compressor. Part of it drives the
generator/machinery.


8 July 2014 2
Unit III Power plant engineering
Gas turbine power plant
Gas turbine:
Description:

Gas turbines burn fuels such as oil,
nature gas and pulverised(powdered)
coal.
Instead of using the heat to produce
steam, as in steam turbines, gas turbines
use the hot gases directly to turn the
turbine blades.
Gas turbines have three main parts:
i) Air compressor
ii) Combustion chamber
iii) Turbine
8 July 2014 3
Unit III Power plant engineering
Gas turbine power plant
Gas turbine:
Air compressor:
The air compressor and turbine are
mounted at either end on a common
horizontal axle(shaft), with the
combustion chamber between them.
Gas turbines are not self starting. A
starting motor initially drives the
compressor till the first combustion of
fuel takes place, later, part of the
turbines power runs the compressor.
The air compressor sucks in air and
compresses it, thereby increasing its
pressure.

8 July 2014 4
Unit III Power plant engineering
Gas turbine power plant
Gas turbine:
Combustion chamber:
In the combustion chamber, the
compressed air combines with fuel and
the resulting mixture is burnt.
The greater the pressure of air, the better
the fuel air mixture burns.
Modern gas turbines usually use liquid
fuel, but they may also use gaseous fuel,
natural gas or gas produced artificially
by gasification of a solid fuel.
Note :
The combination of air compressor and
combustion chamber is called as gas
generator.

8 July 2014 5
Unit III Power plant engineering
Gas turbine power plant
Gas turbine:
Turbine:
o The burning gases expand rapidly and
rush into the turbine, where they cause
the turbine wheels to rotate.
o Hot gases move through a multistage gas
turbine.
o Like in steam turbine, the gas turbine
also has fixed(stationary) and
moving(rotor) blades.
o The stationary blades guide the moving
gases to the rotor blades and adjust its
velocity.
o The shaft of the turbine is coupled to a
generator or machinery to drive it.

8 July 2014 6
Unit III Power plant engineering
Gas turbine power plant
Applications of gas turbine:
Gas turbines are used to drive pumps, compressors and high speed cars.
Used in aircraft and ships for their propulsion. They are not suitable for
automobiles because of their very high speeds.
Power generation(used for peak load and as stand-by unit).

Note :
Gas turbines run at even higher temperatures than steam turbines, the
temperature may be as high as 1100 1260
0
C.
The thermal efficiency of gas turbine made of metal components do not
exceed 36%.
Research is underway to use ceramic components at turbine inlet
temperature of 1350
0
C or more, and reach thermal efficiencies over 40% in a
300 kW unit.



8 July 2014 7
Layout of a gas turbine power plant
8 July 2014 8
Layout of gas turbine power plant
Starting motor:
Gas turbines are not self starting.
They require a starting motor to
first bring the turbine to the
minimum speed called coming in
speed, for this purpose a starting
motor is required.

Low pressure compressor(LPC):
The purpose of the compressor is
to compress the air. Air from the
atmosphere is drawn into the LPC
and is compressed.
8 July 2014 9
Intercooler:
The air after compression in the LPC
is hot. It is cooled by the intercooler.
The intercooler is circulated with
cooling water.

Layout of gas turbine power plant
High pressure compressor(HPC):
The air from the intercooler enters
the HPC where it is further
compressed to a high pressure.
The compressed air passes
through a regenerator.

Regenerator(Heat exchanger):
The air entering the combustion
chamber(CC) for combustion
must be hot. The heat from the
exhaust gases is picked up by the
compressed air entering the
combustion chamber.

8 July 2014 10
Combustion chamber:
The fuel(natural gas, pulverized coal,
kerosene or gasoline) is injected into the
combustion chamber.
The fuel gets ignited because of the
compressed air.
The fuel along with the compressed air
is ignited sometimes with a spark plug.

Layout of gas turbine power plant
High pressure compressor(HPC):
The air from the intercooler enters
the HPC where it is further
compressed to a high pressure.
The compressed air passes
through a regenerator.

Regenerator(Heat exchanger):
The air entering the combustion
chamber(CC) for combustion
must be hot. The heat from the
exhaust gases is picked up by the
compressed air entering the
combustion chamber.

8 July 2014 11
Combustion chamber:
The fuel(natural gas, pulverized coal,
kerosene or gasoline) is injected into
the combustion chamber.
The fuel gets ignited because of the
compressed air.
The fuel along with the compressed
air is ignited sometimes with a spark
plug.

Layout of gas turbine power plant
High pressure turbine (HPT):
In the beginning the starting
motor runs the compressor shaft.
The hot gases(products of
combustion) expands through the
high pressure turbine.
It is important to note that when
the HPT shaft rotates it infact
drives the compressor shaft which
is coupled to it. Now the HPT
runs the compressor and the
starting motor is stopped.
Note :
About 66% of the power
developed by the gas turbine
power plant is used to run the
compressor.

8 July 2014 12
Only 34% of the power developed by
the plant is used to generate electric
power.

Layout of gas turbine power plant
Low pressure turbine (LPT):
The purpose of the LPT is to
produce electric power.
The shaft of the LPT is directly
coupled with the generator for
producing electricity.
The hot gases(products of
combustion) after leaving the
HPT is again sent to a combustion
chamber where it further
undergoes combustion.
The exhaust gases after leaving
the LPT passes through the
regenerator before being
exhausted through the chimney
into the atmosphere.


8 July 2014 13
The heat from the hot gases is used
to preheat the air entering the
combustion chamber. This preheating
of the air improves the efficiency of the
combustion chamber.
Gas turbine power plant
8 July 2014 14
Advantages of gas turbine power plant :
Storage of fuel requires less area and handling is easy.
The cost of maintenance is less.
It is simple in construction. There is no need for boiler, condenser and other
accessories as in the case of steam power plants.
Cheaper fuel such as kerosene , paraffin, benzene and powdered coal can
be used which are cheaper than petrol and diesel.
Gas turbine plants can be used in water scarcity areas.
Less pollution and less water is required.
Disadvantages of gas turbine power plant :
66% of the power developed is used to drive the compressor. Therefore
the gas turbine unit has a low thermal efficiency.
The running speed of gas turbine is in the range of (40,000 to 100,000
rpm) and the operating temperature is as high as 1100 1260
0
C. For this
reason special metals and alloys have to be used for the various parts of
the turbine.
High frequency noise from the compressor is objectionable.

Videos and Animations
1. How a gas turbine engine works


2. Gas turbine working principle

3.



3 Gas turbine power plant.swf
Thank You
8 July 2014 16

You might also like