This document contains 50 multiple choice questions related to machine shop tools and processes. The questions cover topics like milling machines, lathes, drilling, grinding, and other metalworking equipment. They ask about specifications, components, cutting speeds, tool types, and other technical details related to operating and maintaining these machines.
This document contains 50 multiple choice questions related to machine shop tools and processes. The questions cover topics like milling machines, lathes, drilling, grinding, and other metalworking equipment. They ask about specifications, components, cutting speeds, tool types, and other technical details related to operating and maintaining these machines.
This document contains 50 multiple choice questions related to machine shop tools and processes. The questions cover topics like milling machines, lathes, drilling, grinding, and other metalworking equipment. They ask about specifications, components, cutting speeds, tool types, and other technical details related to operating and maintaining these machines.
This document contains 50 multiple choice questions related to machine shop tools and processes. The questions cover topics like milling machines, lathes, drilling, grinding, and other metalworking equipment. They ask about specifications, components, cutting speeds, tool types, and other technical details related to operating and maintaining these machines.
Download as PPTX, PDF, TXT or read online from Scribd
Download as pptx, pdf, or txt
You are on page 1of 51
TEST NO.
28
1. A planer which has a cutting action on both strokes.
a. Open side planer b. Pit planer c. Double housing planer d. Universal planer
2. The straddle milling is done by means of two ______.
a. Side milling cutters b. Face milling cutters c. Plain milling cutters d. Form cutters
3. In a standard dividing head, the ratio between the worm
wheel and the worm is a. 10:1 b. 20:1 c. 30:1 d. 40:1
4. In a standard dividing head, 3 holes in 27 holes circle will
index ______. a. 1 b. 2 c. 4 d. 6
5. These are two different movements of the crank in which
type of indexing? a. Angular b. Compound c. Differential d. Simple
6. In a vertical milling machine. The spindle is situated _____
to work table. a. At certain angle b. Horizontal c. Vertical d. Adjacent
7. Planner type milling machine is built up for ____ work.
a. Heavy duty b. Light duty c. Medium duty d. ordinary
8. In a straddle milling operation, how many cutters are used
to mill the work? a. one b. two c. three d. More than three
9. For gear cutting, which of the following cutters is used?
a. End mill cutter b. Form relieve cutter c. Plain milling cutter d. All of the above
10. In a slotter, the table gets _____ different feeds.
a. four b. two c. three d. five
11. If the clearance of a cutting edge is 5, the lip angle is 75,
the rake angle will be a. 10 b. 70 c. 80 d. 60
12. The approximate hardness of high speed steel end mill
cutter is: a. 45 HRC b. 52 HRC c. 62 HRC d. 72HRC
13. The over arm of a milling machine is used to support
a. arbor b. column c. spindle d. table
14. Where does the feed motion take place in a slotting
machine? a. During the cutting motion b. After each forward stroke c. At the end of return motion d. After each double stroke
15. Which of the following conditions may cause error during
knurling? a. Clamped length of tool too short b. Surface speed too low c. Too much longitudinal feed d. Unnecessary support with tail stock center
16. Mark the milling method during which the formation of
chatter marks is very likely a. During down cut milling with a straight too cutter b. During face milling with a straight tooth cutter c. During up cut milling with a straight tooth cutter d. While using spiral tooth cutter
17. Taps are resharpened by grindings
a. diameter b. flutes c. relief d. threads
18. Grinding fluids are used to
a. Reduce the friction between the wheel face and the job b. Wash away chips c. Prevent loading wheel d. All of the above
19. While soldering, the flux is used because
a. it assists for quick melting and increasing the fluidity of solder b. it saves the part from oxidation c. it takes molten metal on all surface d. all of the above
20. the usual ratio of soluble oil and water used in
coolant is a. 1:10 b. 1:20 c. 10:1 d. 20:1
21. For a given rpm. If the diameter of a twist drill
increases, then cutting speed will a. decrease b. increase c. same. d. none of the above
22. An advance motion along the longitudinal axis of
twist drill is called a. cutting speed b. feed c. speed d. none of the above
23. in internal cylindrical grinding wheel and the work
rotate in a. same direction b. opposite direction c. neither A or B d. A and B both
24. For grinding materials having low tensile strength
which of the following abrasives is used? a. aluminium b. corundum c. emery d. silicon carbide
25. the size of grinding wheels is taken from
a. diameter of the wheel b. bore size c. width of face d. all of the above
26. which center is used for supporting open end of
pipes, shells etc., while turning or thread cutting in a lathe? a. ball center b. half center c. female center d. pipe center
27. when outside diameter of a job is turned in
relation to the internal hole, the job should be ______. a. between centers b. in three jaw chuck c. on face plate d. on lathe mandrel
28. What is the included angle of a dead center?
A. 30 B. 45 C. 60 D. 90
29. What is the main alloying element in high speed
steel? A. Chromium B. Tungsten C. Vanadium D. Nickel
30. The value of one micron is
A. 1.00 mm B. 0.01 mm C. 0.10 mm D. 0.001 mm
31. For the accurate measurement of bores, the
instrument to use is A. dial test indicator B. inside micrometer C. plug gauge D. verneir calliper
32. Under sine principle the length of sine bar takes
the place of ____________. A. adjacent B. height C. hypotenuse D. opposite
33. In a hydraulic driven shaper the metal is removed
at A. average speed B. higher speed C. lower speed D. none of the above
34. In a shaper, the cutting speed is expressed in
A. meter per minute B. meter per hour C. meter per second D. none of the above
35. amount of automatic feed in shaper is increased by taking
the crankpin a. at the center of crank disc b. towards the center of crank disc c. away from the center of crank disc d. none of the above
36. in a shaper the feed is usually expressed in
a. mm / stroke b. mm / revolution c. meter / minute d. none of the avbove
37. for cutting gear teeth in a shaper, the ____ tool is
used. a. form b. gooseneck c. round nose d. V shaped
38. shaper tool bit should not extend in tool holder
beyond a. 5mm b. 15mm c. 25mm d. 50mm
39. the standard ratio of cutting to return stroke in
shaper is a. 3:1 b. 1:3 c. 2:3 d. 3:2
40. A tipped tool is more useful than high speed steel
tool because a. it can resist more heat b. it can keep the cutting point sharp c. cutting speed can be increased d. all of the above
41. the feed in sharper takes place at
a. the beginning of return stroke b. the beginning of cutting stroke c. the middle of return stroke d. the end of return stroke
42. Which of the following quick return mechanism is
most widely used in most of the slotters? A. Slotter disc mechanism B. Slotter link and gear mechanism C. Hydraulic mechanism D. With worth mechanism
43. In a slotter, the cutting speed depends upon the
___________. A. materials to be cut B. finish required C. material of the slotter tool D. all of the above
44. Convex shaped slotter tools are used for
machining A. concave surface B. comical surface C. convex surface D. flat surface
45. The clamp block used in a slotter to support the
end of the trap is made of A. high carbon steel B. high speed steel C. lead D. wood
46. The table of slotter has feeding requirements
which is A. longitudinal B. cross C. rotary D. all of the above
47. Divided table planer has __________.
A. one table B. one housing C. two tables D. two housing
48. In a planer the feed is provided
A. at forward stroke B. at return stroke C. in between forward stroke D. in between return stroke
49. In a planer the cutting speed depends upon the
A. material of job material of tool and feed rale B. rpm of ball gear C. depth of cut D. none of the above
50. The planer tool differs from lathe tool because it
has A. less front and side clearance B. more front and side clearance C. less rake and angle D. more rake and angle