Professional Documents
Culture Documents
250+ TOP MCQs On Manufacturing Process and Answers Quiz 2023
250+ TOP MCQs On Manufacturing Process and Answers Quiz 2023
ABOUT US
Answer: b
Clarification: Forming and shaping process includes powder metallurgy. Powder metallurgy is a process in which material or
shapes are made from or by using metal powders.
Answer: d
Clarification: Only rolling, forging and sheet forming are included in forming and shaping process. Broaching is included in
fabrication process.
3. Expendable mold and permanent mold are the parts of ____ manufacturing process.
a) machining
b) casting
c) none of the mentioned
d) joining
Answer: b
Clarification: In casting, we prepare a mould in which we pour liquid metal. Then we solidify the metal and make the product of
desired shape with the help of pattern.
Answer: b
Clarification: This is false. Casting doesn’t includes grinding process. Machining process includes grinding process.
Answer: a
Clarification: It is a metal joining process. It joints the metal by melting and flowing a filler metal into the joint. The adjoining
metal has higher melting point compare to filler metal.
Answer: c
Clarification: Drilling is included in machining process. For drilling, the drill is rotated with a downward pressure causing the
tool to penetrate into the material.
Answer: b
Clarification: Coating and plating are included in finishing .Welding is included in joining, molding is included in casting and
milling is included in machining. Rest all( mentioned ) are included in finishing process.
Answer: a
Clarification: Only burnishing is an example of finishing process. Diffusion type bonding is included in the of process of joining.
Answer: d
Clarification: Adhesive bonding, brazing and soldering all are thetypes of joining process. In adhesive bonding, adhesive are
used to manufacture an assembly. Brazing and soldering are also the type of manufacturing process.
Answer: c
Clarification: In welding and soldering, once the join has made, we have to break the joint to get different part. So, both welding
and soldering are known as permanent joining process.
Answer: b
Clarification: Brazing is the one type of permanent joining process and mechanical joining is the one type of temporary joining
process because we can remove the joint with the help of equipments like some type of bolts and so on. Breaking of joint is not
necessary in this case.
Answer: a
Clarification: In machining process, some raw material is wasted in or in order to perform different operations like drilling,
turning etc.
14. A desired speed of _____ can be obtained by selecting the suitable change gears havingproper number of teeth.
A. Lead screw
B. Countershaft
C. Spindle
15. The Lathe carriage serves the following purpose of the tool
A. Guiding
B. Feeding
C. Supporting
B. Cross slide
C. Compound rest
D. Tool post
B. Permanent magnet
18. The following is used for holding bored parts for machining their outside surfaces onLathe.
A. Mandrel
B. Dogs
C. Driving plate
D. Angle plate
Answer: A.Mandrel
19. The following is used to turn very long job between centers on a lathe.
A. Steady rest
B. Follower rest
C. Compound rest
20. The following is used to support too flexible job very close to the cutting edge.
A. Steady rest
B. Follower rest
C. Compound rest
B. Milling
C. Copying
22. For correct setting for turning operation in a lathe machine, the tool nose should touch the workpiece _____ horizontal line
which is parallel to and at the same level as the axis of correctly centred workpiece.
A. Exactly on a
B. Above the
C. Below the
Answer: A.Exactly on a
B. Dies
C. Lathe machine
25. The axial advancement in one rotation of the screwed part is known as ____ of the threads.
A. Pitch
B. Lead
C. Pitch diameter
D. Helix
Answer: B.Lead
26. To cut a screw of 3mm pitch on Lathe machine having same speeds of spindle and lead screw, the tool should move, parallel
to the axis of the work, a distance of ____ for every revolution of the spindle.
A. 1.5 mm
B. 3 mm
C. 4.5 mm
D. 6 mm
Answer: B.3 mm
27. In cutting Right hand threads, the spindle and lead screw rotates in the
A. Same direction
B. Opposite direction
B. Tapered surfaces
D. Threads
B. tapping
C. lapping
B. by special attachments
C. by a socket
31. Which of the following method is not used for holding tool?
A. by a sleeve
B. by chucks
C. by a socket
B. false
C. none
D. all
Answer: B.false
33. Which of the following device is not used for holding the work in a drilling machine?
A. step block
B. drill jigs
B. false
C. none
D. all
Answer: B.false
35. The drilling machine is the second most important machine tool in a workshop.
A. true
B. false
C. none
D. all
Answer: A.true
B. cylindrical surface
C. taper surface
37. For drilling operation, the drill rotates with_____ pressure if job is held on earth.
A. upward
B. downward
Answer: B.downward
B. by a sleeve
40. Which operation can correct hole location, size or alignment of the hole which is already drilled in workpiece?
A. Boring
B. Rimming
C. Both a. and b
Answer: A.Boring
41. Which drilling machine is used to perform drilling operation on the workpieces which are too heavy and also maybe too
large to mount on worktable?
A. Portable drilling machine
42. The effect of setting a boring tool above center height leads to
A. Increase in the effective rake angle and a decrease in the effective clearance angle
C. Decrease in the effective rake angle and an increase in the effective clearance angle
Answer: A.Increase in the effective rake angle and a decrease in the effective clearance angle
43. In which of the following machine, the work rotates and the tool is stationary?
A. Vertical boring machine
44. The process of chamfering the entrance of a drilled hole is known as_____
A. counter-boring
B. counter-sinking
C. counter-fillet
D. trepanning
Answer: B.counter-sinking
45. On drilling machine, which process is known as reaming?
A. Enlargement of existing hole
47. The speed at which the piece advances through the cutter is called
A. Cutting speed
B. Feed rate
C. Depth of cut
48. In _____, the cutting action occurs primarily at the end corners of the milling cutter.
A. Face milling
B. Peripheral milling
B. Threads
C. Gear teeth
B. Cemented carbide
C. Aluminium oxide
51. The use of coatings on milling cutters will increase the ____ of the tool.
A. Surface hardness
B. Corrosion resistance
C. Surface finish
D. Melting point
B. Same, horizontal
C. Different, vertical
D. Different, horizontal
B. Turret mill
B. Moving, parallel
D. Moving, perpendicular
B. Only perpendicular
D. Inclined
B. Spiral bevel
C. Spur
B. Used in diesinking
B. Shipyard industry
D. Agriculture industry
Answer: C.Both (A) and (B)
62. In end mill cutter, flutes of the milling bit are
A. Deep helical grooves running up the cutter
C. Holes
B. Tooth
C. Tip
D. Shank
Answer: A.Flute
64. End mills have cutting teeth
A. At one end
B. On the sides
B. Planning machine
C. Slotting machine
B. Planning machine
C. slotting machine
B. Planning machine
C. Slotting machine
D. None of these
B. Planning machine
C. Slotting machine
D. None of these
B. Planning machine
C. Slotting machine
D. None of these
B. Lot production
C. Mass production
D. None of these
B. Planning machine
C. Slotting machine
D. None of these
B. Planning machine
C. Slotting machine
D. All of these
D. A machining process for removal of a layer of material of desired width and depth
Answer: D.A machining process for removal of a layer of material of desired width and depth
B. Thin or fragile jobs can be conveniently machined because of lower cutting forces
B. Grinding
C. Spline cutting
D. To avoid buckling
C. To reduce the friction between tool surface and the workpiece by breaking the chips
B. False
C. none
D. all
Answer: B.False
82. How many types of broaches are there?
A. 3
B. 5
C. 8
D. 9
Answer: D.9
83. Which of the following broaches are re-sharpened by grinding at rake faces?
A. Form relieved type
B. Modular type
D. Sectional type
B. Sectional type
C. Segmented type
B. Grinding
B. Lapping
C. Sanding
B. Mandrel
C. Tool post
Answer: A.Chuck
89. Grinding is commonly used on
A. Aluminium
B. Brass
C. Plastic
D. Cast Iron
B. Brass
C. Plastic
B. Plunge grinding
C. Centerless grinding
B. Two
C. Three
D. Four
Answer: B.Two
93. Most cylindrical grinding machines include a ___ to allow the forming of tapered piece.
A. Grinding dog
B. Swivel
C. Center driver
Answer: B.Swivel
94. In cylindrical grinding, the abrasive wheel and the workpiece are
A. Rotated by separate motors and at different speeds.
B. Cylindrical grinding
C. Surface grinding
B. Chuck
C. Work rest
B. In feed grinding
B. Negatively charged
C. Grounded
C. Flushed out
C. Synthetic oil
B. Physical properties
C. Chemical properties
B. Stainless steel
C. Plastics
105. In which operation, motion of job is rotary and motion of cutting tool is forwardtranslating?
A. turning
B. planning
C. milling
Answer: A.turning
B. translating
C. fixed
Answer: C.fixed
108. In which type of operation, motion of cutting tool is rotary as well as translating?
A. planning
B. milling
C. drilling
D. turning
Answer: C.drilling
B. false
C. none
D. all
Answer: B.false
110. Which of the following is the example of multi point cutting tool?
A. milling cutter
B. broaching tool
B. 3
C. 4
Answer: A.2
112. In how many groups, various metal working processes can be classified?
A. 2
B. 3
C. 4
Answer: A.2
113. In lathe work, when the tool is fed parallel to the rotation of job work, it will produce
A. Cylindrical surface
B. Spherical surface
C. Tapered surface
114. The following type of Lathe is operated through Cams and Cam plate.
A. Precision Lathe
B. Crankshaft Lathe
D. Duplicating Lathe
115. The following part of Lathe serves as housing for the driving pulleys and back gears
A. Head stock
B. Tail stock
C. Bed
D. Carriage
116. In Lathe, the back gears are used for affecting _______ in spindle speeds, therebyfacilitating wider range of speeds
A. Increase
B. Reduction
C. Increase or reduction
Answer: B.Reduction
117. The following acts as driving shaft in Lathe.
A. Countershaft
B. Spindle shaft
C. Lead screw
Answer: A.Countershaft
Manufacturing Process objective questions with answers pdf download online exam test
LEAVE A REPLY
Your email address will not be published. Required fields are marked *
Comment *
Name *
Email *
Website
Post Comment
Engineering 2023 , Multiple Choice Questions and Answers for Engineering & Medical , Theme by Engineering|| Privacy Policy|| Terms and Conditions|| ABOUT US|| Contact US||
Engineering interview questions,Mcqs,Objective Questions,Class Lecture Notes,Seminor topics,Lab Viva Pdf PPT Doc Book free download. Most Asked Technical Basic CIVIL | Mechanical | CSE | EEE | ECE | IT |
Chemical | Medical MBBS Jobs Online Quiz Tests for Freshers Experienced .