Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 711 views

    MG 534 Display System Self-Test

    Uploaded by

    Qike Flowers
    The document describes the startup and self-test process for an MG 534 crane display system. It will briefly display an initial screen, then undergo a 7-10 second self-test. After the self-test, it will display the main working screen. It also provides details about the various configuration, calibration, and diagnostic screens that are accessible through the display interface.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd

    MG 534 Display System Self-Test

    Uploaded by

    Qike Flowers
    711 views19 pages
    The document describes the startup and self-test process for an MG 534 crane display system. It will briefly display an initial screen, then undergo a 7-10 second self-test. After the self-test, it will display the main working screen. It also provides details about the various configuration, calibration, and diagnostic screens that are accessible through the display interface.

    Original Description:

    MG 534 DISPLAY

    Original Title

    MG 534 Display

    Copyright

    © © All Rights Reserved

    Available Formats

    PPT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the startup and self-test process for an MG 534 crane display system. It will briefly display an initial screen, then undergo a 7-10 second self-test. After the self-test, it will display the main working screen. It also provides details about the various configuration, calibration, and diagnostic screens that are accessible through the display interface.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    711 views19 pages

    MG 534 Display System Self-Test

    Uploaded by

    Qike Flowers
    The document describes the startup and self-test process for an MG 534 crane display system. It will briefly display an initial screen, then undergo a 7-10 second self-test. After the self-test, it will display the main working screen. It also provides details about the various configuration, calibration, and diagnostic screens that are accessible through the display interface.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    You are on page 1of 19

    MG 534 Display

    System Self-Test

    On initial startup
    the LinkBelt
    Preferred screen Load
    LinkBelt
    RTC-8065II
    9.4 System Self-Test
    will appear Angle In Process
    Length Unit: FEET
    briefly, then the 72.0
    Radius
    Radius Unit: FEET
    Load Unit: LB x 1k
    system will 9.3 FT

    initiate a self-test Length


    38.0
    which will last
    approx. 7-10
    seconds. Then
    the system will
    go to the working
    screen.
    MG 534 Display
    Pre-Alarm Overload Alarm

    Bar graph

    Horn Max Capacity


    Erected Attachment Actual Hook load
    & Information Parts of Line & Button
    Auxiliary Head Erected
    Winches & Winch
    Boom Angle Selection Button

    Display Brightness Control Radius

    Boom Mode Selection Boom Length

    Outrigger Configuration Information/Warning Bar

    Display Select Button Cancel Alarm Button

    Crane Setup Button Operator Settable Alarms


    Stowed Fly Counterweight
    Crane Setup
    Outrigger/Tires Selection
    • After pressing the Crane
    Setup button the first
    selection will be for
    outrigger/tire/rigging
    selection.
    • Pressing “More” will take
    you to the next selection
    screen. Pressing it again
    will return you to the first
    screen.
    Crane Setup
    Counterweight Selection
    • The next step is to
    select counterweight
    options.
    • If your machine has
    no counterweight
    options this screen
    will automatically be
    skipped.
    Crane Setup
    Boom Mode Selection
    • The boom must be
    fully retracted in order
    to change boom
    modes.
    • If the boom is not fully
    retracted then this
    screen will be
    skipped.
    Crane Setup
    Auxiliary Head Selection
    • Select whether the
    Auxiliary Head is or is
    not installed on the
    machine
    Crane Setup
    Erected Fly
    • Select whether there
    is or is not a fly
    erected on the
    machine.
    • If there is a fly
    selected the next
    screen will ask for the
    offset angle of the fly.
    Crane Setup
    Rear Winch Pick Point Selection
    • Select the appropriate
    pick point (Main
    Boom, Aux, Fly or Not
    Used) for the rear
    winch.
    • Once the selection
    has been made the
    screen will
    automatically go to
    the next screen.
    Crane Setup
    Front Winch Pick Point Selection
    • Select the appropriate
    pick point (Main
    Boom, Aux, Fly or Not
    Used) for the front
    winch.
    • Notice the one less
    pick point selection.
    Crane Setup
    Stowed Fly Selection
    • Select any fly or part
    of fly stowed on the
    side of the boom.
    MG 534 Display
    Operator Settable Alarms

    Whenever an Enter the


    Operator Settable Operator
    Alarm is set there Settable
    will be a red bell Alarms by
    appear on the pressing the
    display letting bell button
    you know there is
    an alarm set.
    MG 534 Display
    Operator Settable Alarms
    MG534 Display
    Boom Limits

    Once the machine


    has been physically Maximum Length
    moved to the 55.0
    OFF
    position to set the
    alarm, press the
    corresponding 55.0 60.0 25.0
    65.4
    alarm button to set.
    Press again to turn
    off the alarm. 60.0
    OFF Maximum Tip Height

    65.4
    OFF Maximum Angle

    25.0
    OFF Minimum Angle
    MG534 Display
    Swing Limits
    265.0
    OFF Left Swing
    SET
    Once the machine
    has been physically
    moved to the 95.0
    265.0
    position to set the
    alarm, press the
    Set both Alarms
    corresponding
    alarm button to set.
    Press again to turn
    off the alarm. You 95.0
    OFF Right Swing
    must set both SET
    limits!
    MG534 Display
    Defined Area
    Using Length, Angle and
    Swing set the machine to the
    desired right or left limit. 97.2
    Then press the
    corresponding button to set
    the alarm. Right Area
    You must set both limits!
    Anytime the boom exceeds Left Area
    the limit by either extending,
    angle movement or swing
    the alarm will be sounded.
    MG534 Display
    Calibration & Diagnostics Screen
    • Pressing the Display Select
    button will cause the following
    screen to be displayed. A00 B0 C00 D00

    • Pressing the button beside the


    Error Codes button will cause
    the error codes to be displayed
    in the white box.
    • Pressing the button beside the
    Enter Calibration will take you
    to the Calibration Screen and
    request you input the
    calibration key sequence.
    MG534 Display
    Calibration Security Code

    Load MicroGuard 534


    9.4
    Calibration
    1
    Angle
    Entry Security
    72.0 Enter Correct
    Radius Key Sequence
    9.3 FT
    Length
    38.0
    3

    2
    MG534 Display
    Calibration Menu
    00 Error Codes
    01 Crane Data
    02 Zero Sensor
    03 Span
    Sensor Load

    04 Swing Pot 9.4 00 Error Codes


    Angle
    05 Radius/Mom 72.0
    Radius Menu Up
    06 Boom Defl’n 9.3 FT
    Length
    07 Head Angle Menu Down
    38.0
    08 Attachments
    09 Winches
    10 Rope Limits
    11 Alarms
    Exit
    12 Digital I/O
    13 Monitor
    14
    15 Pressure
    Think Safety!!!!

    You might also like