Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
122 views

Fluid Flow Operations Lecture 1: Introduction: Dr. Srinivas Krishnaswamy Assistant Professor Chemical Engineering

This document provides an overview of fluid mechanics concepts that will be covered in an introductory fluid mechanics course. It defines key fluid properties such as density, viscosity, compressibility, and vapor pressure. It explains that fluids can be gases or liquids, and discusses the differences between compressible and incompressible fluids. Key concepts covered include density, specific gravity, viscosity, bulk modulus, speed of sound in gases and liquids, vapor pressure, evaporation, boiling, and surface tension. The document lays the groundwork for further exploration of these topics in subsequent course lectures.

Uploaded by

PRAJWAL RASTOGI
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
122 views

Fluid Flow Operations Lecture 1: Introduction: Dr. Srinivas Krishnaswamy Assistant Professor Chemical Engineering

This document provides an overview of fluid mechanics concepts that will be covered in an introductory fluid mechanics course. It defines key fluid properties such as density, viscosity, compressibility, and vapor pressure. It explains that fluids can be gases or liquids, and discusses the differences between compressible and incompressible fluids. Key concepts covered include density, specific gravity, viscosity, bulk modulus, speed of sound in gases and liquids, vapor pressure, evaporation, boiling, and surface tension. The document lays the groundwork for further exploration of these topics in subsequent course lectures.

Uploaded by

PRAJWAL RASTOGI
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 22

Fluid Flow Operations

Lecture 1: Introduction

Dr. Srinivas Krishnaswamy


ASSISTANT PROFESSOR
CHEMICAL ENGINEERING
Fluid Mechanics Overview

Fluid Mechanics

Gas Liquids Statics Dynamics

F 0 i  F  0 , Flows
i

Water, Oils, Stability


Air, He, Ar, Buoyancy
Alcohols, Pressure Compressible/
N2, etc.
etc.
Incompressible

Surface Laminar/

Tension Turbulent
Steady/Unsteady
Compressibility Density Viscosity
Vapor Viscous/Inviscid
Pressure
Chapter 1: Introduction Fluid Dynamics:
Chapter 2: Fluid Statics
Rest of Course
Characteristics of Fluids

• Gas or liquid state


• “Large” molecular spacing relative to a solid
• “Weak” intermolecular cohesive forces
• Can not resist a shear stress in a stationary
state
• Will take the shape of its container
• Generally considered a continuum
• Viscosity distinguishes different types of fluids
Measures of Fluid Mass and Weight: Density
The density of a fluid is defined as mass per unit volume.
m

v
m = mass, and v = volume.

•Different fluids can vary greatly in density


•Liquids densities do not vary much with pressure and temperature
•Gas densities can vary quite a bit with pressure and temperature
•Density of water at 4° C : 1000 kg/m3
•Density of Air at 4° C : 1.20 kg/m3

1
Alternatively, Specific Volume: 

Measures of Fluid Mass and Weight: Specific Weight
The specific weight of fluid is its weight per unit volume.

  g
g = local acceleration of gravity, 9.807 m/s2

•Specific weight characterizes the weight of the fluid system


•Specific weight of water at 4° C : 9.80 kN/m3
•Specific weight of air at 4° C : 11.9 N/m3
Measures of Fluid Mass and Weight: Specific
Gravity
The specific gravity of fluid is the ratio of the density of the fluid to
the density of water @ 4° C.


SG 
 H 2O

•Gases have low specific gravities


•A liquid such as Mercury has a high specific gravity, 13.2
•The ratio is unitless.
•Density of water at 4° C : 1000 kg/m3
Viscosity: Introduction
The viscosity is measure of the “fluidity” of the fluid which is not capture
d simply by density or specific weight
. A fluid can not resist a shear and under shear begins to flow. The
shearing stress and shearing strain can be related with a relationship of
the following form for common fluids such as
water, air, oil, and gasoline:
du
 
dy
 is the absolute viscosity or dynamics viscosity of the fluid, u is the
velocity of the fluid and y is the vertical coordinate as shown in the
schematic below:

“No Slip C
ondition”
Viscosity: Measurements
A Capillary Tube Viscometer is one method of measuring the
viscosity of the fluid.
Viscosity Varies from Fluid to Fluid and is
dependent on temperature, thus temperature is measured as
well.
Units of Viscosity are N·s/m2 or lb·s/ft2
Viscosity: Newtonian vs. Non-Newtonian
Toothpaste
Latex
Paint

Corn
Starch

Newtonian Fluids are Linear Relationships between stress and


strain: Most common fluids are Newtonian.
Non-Newtonian Fluids are Non-Linear between stress and strain
Viscosity: Kinematic Viscosity




•Kinematic viscosity is another way of representing
viscosity
•Used in the flow equations
•The units are of L2/T or m2/s and ft2/s
Compressibility of Fluids: Bulk Modulus
dp
E 
d / 
P is pressure, and  is the density.

•Measure of how pressure compresses the volume/density


•Units of the bulk modulus are N/m2 (Pa) and lb/in.2 (psi).
•Large values of the bulk modulus indicate incompressibility
•Incompressibility indicates large pressures are needed to compress the
volume slightly
•It takes 3120 psi to compress water 1% at atmospheric pressure and 60°
F.
•Most liquids are incompressible for most practical engineering problems.
Compressibility of Fluids: Compression of Gases
Ideal Gas Law: p  RT

P is pressure,  is the density, R is the gas constant, and T is Temperature

Isothermal Process (constant temperature):


p Math
 cons tan t E  p

Isentropic Process (frictionless, no heat exchange):
p Math
k
 cons tan t E  kp

k is the ratio of specific heats, cp (constant pressure) to
cv (constant volume), and R = cp – cv.

If we consider air under at the same conditions as water, we can


show that air is 15,000 times more compressible than water.
However, many engineering applications allow air to be
considered incompressible.
Compressibility of Fluids: Speed of Sound
A consequence of the compressibility of fluids is that small disturbances
introduced at a point propagate at a finite velocity. Pressure disturbances
in the fluid propagate as sound, and their velocity is known as the speed of
sound or the acoustic velocity, c.

dp Ev
c or c 
d 

Isentropic Process (frictionless, no heat exchange because):

kp
c

Ideal Gas and Isentropic Process:

c  kRT
Compressibility of Fluids: Speed of Sound
Speed of Sound in Air at 60 °F  1117 ft/s or 300 m/s
Speed of Sound in Water at 60 °F  4860 ft/s or 1450 m/s
If a fluid is truly incompressible, the speed of sound is infinite,
however, all fluids compress slightly.

Example: A jet aircraft flies at a speed of 250 m/s at an altitude of 10,700


m, where the temperature is -54 °C. Determine the ratio of the speed of
the aircraft, V, to the speed of sound, c at the specified altitude. Assume k
= 1.40
Ideal Gas and Isentropic Process:
c  kRT
c  1.40 * (286.9 J / kgK ) * 219 K
c  296.6 m / s
Compressibility of Fluids: Speed of Sound
Example (Continued):
V
Ratio 
c
250 m / s
Ratio 
296.6 m / s
Ratio  0.84
 The above ratio is known as the Mach Number, Ma
 For Ma < 1 Subsonic Flow
 For Ma > 1 Supersonic Flow

For Ma > 1 we see shock waves and “sonic booms”:


1) Wind Tunnel Visualization known as
Schlieren method
2) Condensation instigated from jet speed allowing us to
see a shock wave
Vapor Pressure: Evaporation and Boiling
Evaporation occurs in a fluid when liquid molecules at the surface have
sufficient momentum to overcome the intermolecular cohesive forces and escape
to the atmosphere.

Vapor Pressure is that pressure exerted on the fluid by the vapor in a closed
saturated system where the number of molecules entering the liquid are the same
as those escaping. Vapor pressure depends on temperature and type of fluid.

Boiling occurs when the absolute pressure in the fluid reaches the vapor pressure.
Boiling occurs at approximately 100 °C, but it is not only a function of temperature,
but also of pressure. For example, in Colorado Spring, water boils at temperatures
less than 100 °C.

Cavitation is a form of
Boiling due to low pressure
locally in a flow.
Surface Tension
At the interface between a liquid and a gas or two immiscible liquids, forces
develop forming an analogous “skin” or “membrane” stretched over the
fluid mass which can support weight.

This “skin” is due to an imbalance of cohesive forces. The interior of the fluid is
in balance as molecules of the like fluid are attracting each other while on the
interface there is a net inward pulling force.

Surface tension is the intensity of the molecular attraction per unit length along
any line in the surface.

Surface tension is a property of the liquid type, the temperature, and the other
fluid at the interface.

This membrane can be “broken” with a surfactant which reduces the surface
tension.
Surface Tension: Liquid Drop
The pressure inside a drop of fluid can be calculated using a free-body diagram:
Real Fluid Drops Mathematical Model

R is the radius of the droplet,  is the surface tension, p is the pressure


difference between the inside and outside pressure.
The force developed around the edge due to surface tension along the line:
F  2R
surface
Applied to Circumference

This force is balanced by the pressure difference p:


Applied to Area
Fpressure  pR 2
Surface Tension: Liquid Drop
Now, equating the Surface Tension Force to the Pressure Force, we
can estimate p = pi – pe:
2
p 
R
This indicates that the internal pressure in the droplet is greater that the
external pressure since the right hand side is entirely positive.

Is the pressure inside a bubble of water greater or less than that of a


droplet of water?
4
Prove to yourself the following result: p 
R
Surface Tension: Capillary Action
Capillary action in small tubes which involve a liquid-gas-solid
interface is caused by surface tension. The fluid is either drawn up
the tube or pushed down.
“Wetted” “Non-Wetted”

Adhesion

Cohesion
Adhesion
Cohesion

Adhesion > Cohesion Cohesion > Adhesion

h is the height, R is the radius of the tube,  is the angle of contact.


The weight of the fluid is balanced with the vertical force caused by surface
tension.
Surface Tension: Capillary Action
Free Body Diagram for Capillary Action for a Wetted Surface:

Fsurface  2R cos 


W  R 2 h
Equating the two and solving for h:
2 cos 
h
R
For clean glass in contact with water,   0°, and thus as R decreases, h
increases, giving a higher rise.

For a clean glass in contact with Mercury,   130°, and thus h is negative
or there is a push down of the fluid.
Surface Tension: Capillary Action

At what value of contact angle  does the liquid-solid interface become


“non-wetted”?
 > 90°

Surface tension is apparent in many practical problems such as movement


of liquid through soil and other porous media, flow of thin films, formation of
drops and bubbles, and the breakup of liquid jets.

You might also like