Project - PPT - 3308-1 Final
Project - PPT - 3308-1 Final
Presentation
on
Plastic can release harmful chemicals into the surrounding soil or other
surrounding water sources and also the ecosystem to the safety of our
environment
A presenting new paver block having low strength as well as lower efficiency.
So low cost more efficiency and strength paver block is needed to better
performance.
We have to stop use of plastic but it is not possible because of many company
products need to plastic for packing purpose.
To reuse and overcome the plastic we have to produce a plastic paver block to
reduce pollution of environment.
PROBLEM
IDENTIFICATION
GGBFS (Ground granulated blast furnace slag)
Plastic waste which is increasing day by day becomes eyesore and in turn
pollutes the environment
Plastic can release harmful chemicals into the surrounding soil or other
surrounding water sources and also the ecosystem to the safety of our
environment
We have to stop use of plastic but it is not possible because of many
company products need to plastic for packing purpose.
To reuse and overcome the plastic we have to produce a plastic paver
block to reduce pollution of environment
STUDY AIM
• The aim of this project is to replace cement with plastic waste in paver
block and to reduce the cost of paver block
• In this project the study of some of plastic waste materials which we can
reuse by certain processing and use in road construction
• creating awareness amongst the learner in the industry regarding waste
material.
• reducing plastic waste in a useful way
WHY USE OF PLASTIC
Conventional Technology:
• Recycling
• Incineration
• Land filling
New Technology:
• Plasma Pyrolysis Technology
• Liquid Fuel
• Polymer Blended Bitumen Roads
• Co-processing in Cement Kiln
OBJECTIVE
• TEST ON GGBFS
1) Determination of fineness by dry sieving
2) Standard Consistency Test
• TEST ON FINE AGGREGATE
1) Sieve Analysis
3) Specific gravity test
TEST ON PAVER BLOCK
• Compressive Strength Test
• Impact Resistance Test
• Water Absorption Test
• Efflorescence Test
COMPRESSIVE STRENGTH TEST
1 GGBFS 1 0.5 kg
2 VSI 2 1 kg
3 Plastic Crush 2 1 kg
1 GGBFS 1 0.5 kg
2 VSI 4 2 kg
3 Plastic Crush 0 0 kg
3. Plastic crush 0 0 0
2. Plastic crush 0 0 0
The use of plastic in concrete is a new technology on which a lot of research is required.
To increase the use agglomerated HDPE was plastics in landscape construction, the
following measures should be taken
Reduction of the price on plastics products so that more savings on cost of construction are
achieved
More organizations of events such as exhibitions, housing expos and seminars by the
government that advocate for use of recycled plastics for construction.
More sensitization of the public on this mode of construction through the TV, newspapers,
social media, seminars the government should pass a broad policy that advocates the use of
recycled waste plastics in construction projects mainly on section of landscape construction.
ADVANTAGES
Strength of the road increased.
Better resistance to water & water stagnation.
No stripping & have no potholes.
Increased binding & better bonding of the mix.
Better soundness property.
Maintenance cost of the road is almost nil.
No effect of radiation like UV
DIS-ADVANTAGES
Cleaning process -Toxic present in the co-mingled plastic waste start
leaching.
During the road laying process- the presence of chlorine will definitely
release noxious gas.
REFERENCES
• Gopu Mohan.C, Jikku Mathew, Jithin Ninan Kurian, John Thomas Moolayil,“FABRICATION OF PLASTIC BRICK
MANUFACTURING MACHINE AND BRICK ANALYSIS” International Journal of Innovative Research in Science and
Technology, ISSN (online) 2349-6010, Volume 2, Issue 11th April 2016,.
• [2] Dinesh.S, Dinesh.A, Kirubakaran.K, “UTILISATION OF WASTE PLASTIC IN MANUFACTURING OF BRICKS AND
PAVER BLOCKS’’ International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 1, 2016.
• [3] Nivetha c, Rubiya M, Shobana S, Vaijayanthi R, G.Viswanathan and R.Vasanthi, “Production of plastic paver block from
the solid waste ( Quarry dust, flyash and PET)”, ARPN Journal of Engineering and Applied Science, Vol.11, No.2, (2016)
• [4] Dibya Jivan Pati, Riken Homma, Kazuhisaikt, “PLASTIC BOTTLES MASONRY AS ALTERNATE SOLUTION TO
HOUSING PROBLEMS IN URBAN AREA OF INDIA” International Journal of Architecture Planning and Building
Engineering, ISSN 2455-5045, Volume 2,Issued 2nd April 2015.
• [5] Joel Santhosh. Ravikant Talluri. (2015). Manufacture of Interlocking Concrete Paving Blocks with Fly Ash and Glass
Powder. International Journal of Civil Engineering and Technology, 6(4), 55-64.
• [6] Maneeth.P.D, Pramod.K, Kishore Kumar, Shanmukha Shetty, “UTILISATION OF WASTE PLASTIC IN
MANUFACTURING OF PLASTIC-SOIL BRICKS’’International Journal of Engineering Research and Technology (IJERT),
Volume 3, ISSN 2278-0181, Issued 8th August 2014.
THANK YOU